1550 lines
40 KiB
Plaintext
1550 lines
40 KiB
Plaintext
/*
|
|
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
* Based on "omap4.dtsi"
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/pinctrl/dra.h>
|
|
|
|
#include "skeleton.dtsi"
|
|
|
|
#define MAX_SOURCES 400
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
compatible = "ti,dra7xx";
|
|
interrupt-parent = <&crossbar_mpu>;
|
|
|
|
aliases {
|
|
i2c0 = &i2c1;
|
|
i2c1 = &i2c2;
|
|
i2c2 = &i2c3;
|
|
i2c3 = &i2c4;
|
|
i2c4 = &i2c5;
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
serial3 = &uart4;
|
|
serial4 = &uart5;
|
|
serial5 = &uart6;
|
|
serial6 = &uart7;
|
|
serial7 = &uart8;
|
|
serial8 = &uart9;
|
|
serial9 = &uart10;
|
|
ethernet0 = &cpsw_emac0;
|
|
ethernet1 = &cpsw_emac1;
|
|
d_can0 = &dcan1;
|
|
d_can1 = &dcan2;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
gic: interrupt-controller@48211000 {
|
|
compatible = "arm,cortex-a15-gic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = <0x48211000 0x1000>,
|
|
<0x48212000 0x1000>,
|
|
<0x48214000 0x2000>,
|
|
<0x48216000 0x2000>;
|
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
wakeupgen: interrupt-controller@48281000 {
|
|
compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = <0x48281000 0x1000>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
/*
|
|
* The soc node represents the soc top level view. It is used for IPs
|
|
* that are not memory mapped in the MPU view or for the MPU itself.
|
|
*/
|
|
soc {
|
|
compatible = "ti,omap-infra";
|
|
mpu {
|
|
compatible = "ti,omap5-mpu";
|
|
ti,hwmods = "mpu";
|
|
};
|
|
};
|
|
|
|
/*
|
|
* XXX: Use a flat representation of the SOC interconnect.
|
|
* The real OMAP interconnect network is quite complex.
|
|
* Since it will not bring real advantage to represent that in DT for
|
|
* the moment, just use a fake OCP bus entry to represent the whole bus
|
|
* hierarchy.
|
|
*/
|
|
ocp {
|
|
compatible = "ti,dra7-l3-noc", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
ti,hwmods = "l3_main_1", "l3_main_2";
|
|
reg = <0x44000000 0x1000000>,
|
|
<0x45000000 0x1000>;
|
|
interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
l4_cfg: l4@4a000000 {
|
|
compatible = "ti,dra7-l4-cfg", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x4a000000 0x22c000>;
|
|
|
|
scm: scm@2000 {
|
|
compatible = "ti,dra7-scm-core", "simple-bus";
|
|
reg = <0x2000 0x2000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x2000 0x2000>;
|
|
|
|
scm_conf: scm_conf@0 {
|
|
compatible = "syscon", "simple-bus";
|
|
reg = <0x0 0x1400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
pbias_regulator: pbias_regulator {
|
|
compatible = "ti,pbias-omap";
|
|
reg = <0xe00 0x4>;
|
|
syscon = <&scm_conf>;
|
|
pbias_mmc_reg: pbias_mmc_omap5 {
|
|
regulator-name = "pbias_mmc_omap5";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
};
|
|
|
|
scm_conf_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
dra7_pmx_core: pinmux@1400 {
|
|
compatible = "ti,dra7-padconf",
|
|
"pinctrl-single";
|
|
reg = <0x1400 0x0468>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0x3fffffff>;
|
|
};
|
|
|
|
scm_conf1: scm_conf@1c04 {
|
|
compatible = "syscon";
|
|
reg = <0x1c04 0x0020>;
|
|
};
|
|
};
|
|
|
|
cm_core_aon: cm_core_aon@5000 {
|
|
compatible = "ti,dra7-cm-core-aon";
|
|
reg = <0x5000 0x2000>;
|
|
|
|
cm_core_aon_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
cm_core_aon_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
|
|
cm_core: cm_core@8000 {
|
|
compatible = "ti,dra7-cm-core";
|
|
reg = <0x8000 0x3000>;
|
|
|
|
cm_core_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
cm_core_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
};
|
|
|
|
l4_wkup: l4@4ae00000 {
|
|
compatible = "ti,dra7-l4-wkup", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x4ae00000 0x3f000>;
|
|
|
|
counter32k: counter@4000 {
|
|
compatible = "ti,omap-counter32k";
|
|
reg = <0x4000 0x40>;
|
|
ti,hwmods = "counter_32k";
|
|
};
|
|
|
|
prm: prm@6000 {
|
|
compatible = "ti,dra7-prm";
|
|
reg = <0x6000 0x3000>;
|
|
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
prm_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
prm_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
};
|
|
|
|
axi@0 {
|
|
compatible = "simple-bus";
|
|
#size-cells = <1>;
|
|
#address-cells = <1>;
|
|
ranges = <0x51000000 0x51000000 0x3000
|
|
0x0 0x20000000 0x10000000>;
|
|
pcie1: pcie@51000000 {
|
|
compatible = "ti,dra7-pcie";
|
|
reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
|
|
reg-names = "rc_dbics", "ti_conf", "config";
|
|
interrupts = <0 232 0x4>, <0 233 0x4>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
ranges = <0x81000000 0 0 0x03000 0 0x00010000
|
|
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
|
|
#interrupt-cells = <1>;
|
|
num-lanes = <1>;
|
|
ti,hwmods = "pcie1";
|
|
phys = <&pcie1_phy>;
|
|
phy-names = "pcie-phy0";
|
|
interrupt-map-mask = <0 0 0 7>;
|
|
interrupt-map = <0 0 0 1 &pcie1_intc 1>,
|
|
<0 0 0 2 &pcie1_intc 2>,
|
|
<0 0 0 3 &pcie1_intc 3>,
|
|
<0 0 0 4 &pcie1_intc 4>;
|
|
pcie1_intc: interrupt-controller {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
axi@1 {
|
|
compatible = "simple-bus";
|
|
#size-cells = <1>;
|
|
#address-cells = <1>;
|
|
ranges = <0x51800000 0x51800000 0x3000
|
|
0x0 0x30000000 0x10000000>;
|
|
status = "disabled";
|
|
pcie@51000000 {
|
|
compatible = "ti,dra7-pcie";
|
|
reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
|
|
reg-names = "rc_dbics", "ti_conf", "config";
|
|
interrupts = <0 355 0x4>, <0 356 0x4>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
ranges = <0x81000000 0 0 0x03000 0 0x00010000
|
|
0x82000000 0 0x30013000 0x13000 0 0xffed000>;
|
|
#interrupt-cells = <1>;
|
|
num-lanes = <1>;
|
|
ti,hwmods = "pcie2";
|
|
phys = <&pcie2_phy>;
|
|
phy-names = "pcie-phy0";
|
|
interrupt-map-mask = <0 0 0 7>;
|
|
interrupt-map = <0 0 0 1 &pcie2_intc 1>,
|
|
<0 0 0 2 &pcie2_intc 2>,
|
|
<0 0 0 3 &pcie2_intc 3>,
|
|
<0 0 0 4 &pcie2_intc 4>;
|
|
pcie2_intc: interrupt-controller {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
bandgap: bandgap@4a0021e0 {
|
|
reg = <0x4a0021e0 0xc
|
|
0x4a00232c 0xc
|
|
0x4a002380 0x2c
|
|
0x4a0023C0 0x3c
|
|
0x4a002564 0x8
|
|
0x4a002574 0x50>;
|
|
compatible = "ti,dra752-bandgap";
|
|
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
|
|
sdma: dma-controller@4a056000 {
|
|
compatible = "ti,omap4430-sdma";
|
|
reg = <0x4a056000 0x1000>;
|
|
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <1>;
|
|
dma-channels = <32>;
|
|
dma-requests = <127>;
|
|
};
|
|
|
|
sdma_xbar: dma-router@4a002b78 {
|
|
compatible = "ti,dra7-dma-crossbar";
|
|
reg = <0x4a002b78 0xfc>;
|
|
#dma-cells = <1>;
|
|
dma-requests = <205>;
|
|
ti,dma-safe-map = <0>;
|
|
dma-masters = <&sdma>;
|
|
};
|
|
|
|
gpio1: gpio@4ae10000 {
|
|
compatible = "ti,omap4-gpio";
|
|
reg = <0x4ae10000 0x200>;
|
|
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "gpio1";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio@48055000 {
|
|
compatible = "ti,omap4-gpio";
|
|
reg = <0x48055000 0x200>;
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "gpio2";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio3: gpio@48057000 {
|
|
compatible = "ti,omap4-gpio";
|
|
reg = <0x48057000 0x200>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "gpio3";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio4: gpio@48059000 {
|
|
compatible = "ti,omap4-gpio";
|
|
reg = <0x48059000 0x200>;
|
|
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "gpio4";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio5: gpio@4805b000 {
|
|
compatible = "ti,omap4-gpio";
|
|
reg = <0x4805b000 0x200>;
|
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "gpio5";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio6: gpio@4805d000 {
|
|
compatible = "ti,omap4-gpio";
|
|
reg = <0x4805d000 0x200>;
|
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "gpio6";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio7: gpio@48051000 {
|
|
compatible = "ti,omap4-gpio";
|
|
reg = <0x48051000 0x200>;
|
|
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "gpio7";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio8: gpio@48053000 {
|
|
compatible = "ti,omap4-gpio";
|
|
reg = <0x48053000 0x200>;
|
|
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "gpio8";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
uart1: serial@4806a000 {
|
|
compatible = "ti,dra742-uart", "ti,omap4-uart";
|
|
reg = <0x4806a000 0x100>;
|
|
interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "uart1";
|
|
clock-frequency = <48000000>;
|
|
status = "disabled";
|
|
dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
uart2: serial@4806c000 {
|
|
compatible = "ti,dra742-uart", "ti,omap4-uart";
|
|
reg = <0x4806c000 0x100>;
|
|
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "uart2";
|
|
clock-frequency = <48000000>;
|
|
status = "disabled";
|
|
dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
uart3: serial@48020000 {
|
|
compatible = "ti,dra742-uart", "ti,omap4-uart";
|
|
reg = <0x48020000 0x100>;
|
|
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "uart3";
|
|
clock-frequency = <48000000>;
|
|
status = "disabled";
|
|
dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
uart4: serial@4806e000 {
|
|
compatible = "ti,dra742-uart", "ti,omap4-uart";
|
|
reg = <0x4806e000 0x100>;
|
|
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "uart4";
|
|
clock-frequency = <48000000>;
|
|
status = "disabled";
|
|
dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
uart5: serial@48066000 {
|
|
compatible = "ti,dra742-uart", "ti,omap4-uart";
|
|
reg = <0x48066000 0x100>;
|
|
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "uart5";
|
|
clock-frequency = <48000000>;
|
|
status = "disabled";
|
|
dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
uart6: serial@48068000 {
|
|
compatible = "ti,dra742-uart", "ti,omap4-uart";
|
|
reg = <0x48068000 0x100>;
|
|
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "uart6";
|
|
clock-frequency = <48000000>;
|
|
status = "disabled";
|
|
dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
uart7: serial@48420000 {
|
|
compatible = "ti,dra742-uart", "ti,omap4-uart";
|
|
reg = <0x48420000 0x100>;
|
|
interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "uart7";
|
|
clock-frequency = <48000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart8: serial@48422000 {
|
|
compatible = "ti,dra742-uart", "ti,omap4-uart";
|
|
reg = <0x48422000 0x100>;
|
|
interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "uart8";
|
|
clock-frequency = <48000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart9: serial@48424000 {
|
|
compatible = "ti,dra742-uart", "ti,omap4-uart";
|
|
reg = <0x48424000 0x100>;
|
|
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "uart9";
|
|
clock-frequency = <48000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart10: serial@4ae2b000 {
|
|
compatible = "ti,dra742-uart", "ti,omap4-uart";
|
|
reg = <0x4ae2b000 0x100>;
|
|
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "uart10";
|
|
clock-frequency = <48000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mailbox1: mailbox@4a0f4000 {
|
|
compatible = "ti,omap4-mailbox";
|
|
reg = <0x4a0f4000 0x200>;
|
|
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "mailbox1";
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <3>;
|
|
ti,mbox-num-fifos = <8>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mailbox2: mailbox@4883a000 {
|
|
compatible = "ti,omap4-mailbox";
|
|
reg = <0x4883a000 0x200>;
|
|
interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "mailbox2";
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <4>;
|
|
ti,mbox-num-fifos = <12>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mailbox3: mailbox@4883c000 {
|
|
compatible = "ti,omap4-mailbox";
|
|
reg = <0x4883c000 0x200>;
|
|
interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "mailbox3";
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <4>;
|
|
ti,mbox-num-fifos = <12>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mailbox4: mailbox@4883e000 {
|
|
compatible = "ti,omap4-mailbox";
|
|
reg = <0x4883e000 0x200>;
|
|
interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "mailbox4";
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <4>;
|
|
ti,mbox-num-fifos = <12>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mailbox5: mailbox@48840000 {
|
|
compatible = "ti,omap4-mailbox";
|
|
reg = <0x48840000 0x200>;
|
|
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "mailbox5";
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <4>;
|
|
ti,mbox-num-fifos = <12>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mailbox6: mailbox@48842000 {
|
|
compatible = "ti,omap4-mailbox";
|
|
reg = <0x48842000 0x200>;
|
|
interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "mailbox6";
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <4>;
|
|
ti,mbox-num-fifos = <12>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mailbox7: mailbox@48844000 {
|
|
compatible = "ti,omap4-mailbox";
|
|
reg = <0x48844000 0x200>;
|
|
interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "mailbox7";
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <4>;
|
|
ti,mbox-num-fifos = <12>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mailbox8: mailbox@48846000 {
|
|
compatible = "ti,omap4-mailbox";
|
|
reg = <0x48846000 0x200>;
|
|
interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "mailbox8";
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <4>;
|
|
ti,mbox-num-fifos = <12>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mailbox9: mailbox@4885e000 {
|
|
compatible = "ti,omap4-mailbox";
|
|
reg = <0x4885e000 0x200>;
|
|
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "mailbox9";
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <4>;
|
|
ti,mbox-num-fifos = <12>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mailbox10: mailbox@48860000 {
|
|
compatible = "ti,omap4-mailbox";
|
|
reg = <0x48860000 0x200>;
|
|
interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "mailbox10";
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <4>;
|
|
ti,mbox-num-fifos = <12>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mailbox11: mailbox@48862000 {
|
|
compatible = "ti,omap4-mailbox";
|
|
reg = <0x48862000 0x200>;
|
|
interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "mailbox11";
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <4>;
|
|
ti,mbox-num-fifos = <12>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mailbox12: mailbox@48864000 {
|
|
compatible = "ti,omap4-mailbox";
|
|
reg = <0x48864000 0x200>;
|
|
interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "mailbox12";
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <4>;
|
|
ti,mbox-num-fifos = <12>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mailbox13: mailbox@48802000 {
|
|
compatible = "ti,omap4-mailbox";
|
|
reg = <0x48802000 0x200>;
|
|
interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "mailbox13";
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <4>;
|
|
ti,mbox-num-fifos = <12>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer1: timer@4ae18000 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x4ae18000 0x80>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "timer1";
|
|
ti,timer-alwon;
|
|
};
|
|
|
|
timer2: timer@48032000 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x48032000 0x80>;
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "timer2";
|
|
};
|
|
|
|
timer3: timer@48034000 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x48034000 0x80>;
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "timer3";
|
|
};
|
|
|
|
timer4: timer@48036000 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x48036000 0x80>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "timer4";
|
|
};
|
|
|
|
timer5: timer@48820000 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x48820000 0x80>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "timer5";
|
|
};
|
|
|
|
timer6: timer@48822000 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x48822000 0x80>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "timer6";
|
|
};
|
|
|
|
timer7: timer@48824000 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x48824000 0x80>;
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "timer7";
|
|
};
|
|
|
|
timer8: timer@48826000 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x48826000 0x80>;
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "timer8";
|
|
};
|
|
|
|
timer9: timer@4803e000 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x4803e000 0x80>;
|
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "timer9";
|
|
};
|
|
|
|
timer10: timer@48086000 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x48086000 0x80>;
|
|
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "timer10";
|
|
};
|
|
|
|
timer11: timer@48088000 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x48088000 0x80>;
|
|
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "timer11";
|
|
};
|
|
|
|
timer13: timer@48828000 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x48828000 0x80>;
|
|
interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "timer13";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer14: timer@4882a000 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x4882a000 0x80>;
|
|
interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "timer14";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer15: timer@4882c000 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x4882c000 0x80>;
|
|
interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "timer15";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer16: timer@4882e000 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x4882e000 0x80>;
|
|
interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "timer16";
|
|
status = "disabled";
|
|
};
|
|
|
|
wdt2: wdt@4ae14000 {
|
|
compatible = "ti,omap3-wdt";
|
|
reg = <0x4ae14000 0x80>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "wd_timer2";
|
|
};
|
|
|
|
hwspinlock: spinlock@4a0f6000 {
|
|
compatible = "ti,omap4-hwspinlock";
|
|
reg = <0x4a0f6000 0x1000>;
|
|
ti,hwmods = "spinlock";
|
|
#hwlock-cells = <1>;
|
|
};
|
|
|
|
dmm@4e000000 {
|
|
compatible = "ti,omap5-dmm";
|
|
reg = <0x4e000000 0x800>;
|
|
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "dmm";
|
|
};
|
|
|
|
i2c1: i2c@48070000 {
|
|
compatible = "ti,omap4-i2c";
|
|
reg = <0x48070000 0x100>;
|
|
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "i2c1";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@48072000 {
|
|
compatible = "ti,omap4-i2c";
|
|
reg = <0x48072000 0x100>;
|
|
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "i2c2";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@48060000 {
|
|
compatible = "ti,omap4-i2c";
|
|
reg = <0x48060000 0x100>;
|
|
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "i2c3";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@4807a000 {
|
|
compatible = "ti,omap4-i2c";
|
|
reg = <0x4807a000 0x100>;
|
|
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "i2c4";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c5: i2c@4807c000 {
|
|
compatible = "ti,omap4-i2c";
|
|
reg = <0x4807c000 0x100>;
|
|
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "i2c5";
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc1: mmc@4809c000 {
|
|
compatible = "ti,omap4-hsmmc";
|
|
reg = <0x4809c000 0x400>;
|
|
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "mmc1";
|
|
ti,dual-volt;
|
|
ti,needs-special-reset;
|
|
dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
|
|
dma-names = "tx", "rx";
|
|
status = "disabled";
|
|
pbias-supply = <&pbias_mmc_reg>;
|
|
};
|
|
|
|
mmc2: mmc@480b4000 {
|
|
compatible = "ti,omap4-hsmmc";
|
|
reg = <0x480b4000 0x400>;
|
|
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "mmc2";
|
|
ti,needs-special-reset;
|
|
dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
|
|
dma-names = "tx", "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc3: mmc@480ad000 {
|
|
compatible = "ti,omap4-hsmmc";
|
|
reg = <0x480ad000 0x400>;
|
|
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "mmc3";
|
|
ti,needs-special-reset;
|
|
dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
|
|
dma-names = "tx", "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc4: mmc@480d1000 {
|
|
compatible = "ti,omap4-hsmmc";
|
|
reg = <0x480d1000 0x400>;
|
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "mmc4";
|
|
ti,needs-special-reset;
|
|
dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
|
|
dma-names = "tx", "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
abb_mpu: regulator-abb-mpu {
|
|
compatible = "ti,abb-v3";
|
|
regulator-name = "abb_mpu";
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
clocks = <&sys_clkin1>;
|
|
ti,settling-time = <50>;
|
|
ti,clock-cycles = <16>;
|
|
|
|
reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
|
|
<0x4ae06014 0x4>, <0x4a003b20 0xc>,
|
|
<0x4ae0c158 0x4>;
|
|
reg-names = "setup-address", "control-address",
|
|
"int-address", "efuse-address",
|
|
"ldo-address";
|
|
ti,tranxdone-status-mask = <0x80>;
|
|
/* LDOVBBMPU_FBB_MUX_CTRL */
|
|
ti,ldovbb-override-mask = <0x400>;
|
|
/* LDOVBBMPU_FBB_VSET_OUT */
|
|
ti,ldovbb-vset-mask = <0x1F>;
|
|
|
|
/*
|
|
* NOTE: only FBB mode used but actual vset will
|
|
* determine final biasing
|
|
*/
|
|
ti,abb_info = <
|
|
/*uV ABB efuse rbb_m fbb_m vset_m*/
|
|
1060000 0 0x0 0 0x02000000 0x01F00000
|
|
1160000 0 0x4 0 0x02000000 0x01F00000
|
|
1210000 0 0x8 0 0x02000000 0x01F00000
|
|
>;
|
|
};
|
|
|
|
abb_ivahd: regulator-abb-ivahd {
|
|
compatible = "ti,abb-v3";
|
|
regulator-name = "abb_ivahd";
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
clocks = <&sys_clkin1>;
|
|
ti,settling-time = <50>;
|
|
ti,clock-cycles = <16>;
|
|
|
|
reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
|
|
<0x4ae06010 0x4>, <0x4a0025cc 0xc>,
|
|
<0x4a002470 0x4>;
|
|
reg-names = "setup-address", "control-address",
|
|
"int-address", "efuse-address",
|
|
"ldo-address";
|
|
ti,tranxdone-status-mask = <0x40000000>;
|
|
/* LDOVBBIVA_FBB_MUX_CTRL */
|
|
ti,ldovbb-override-mask = <0x400>;
|
|
/* LDOVBBIVA_FBB_VSET_OUT */
|
|
ti,ldovbb-vset-mask = <0x1F>;
|
|
|
|
/*
|
|
* NOTE: only FBB mode used but actual vset will
|
|
* determine final biasing
|
|
*/
|
|
ti,abb_info = <
|
|
/*uV ABB efuse rbb_m fbb_m vset_m*/
|
|
1055000 0 0x0 0 0x02000000 0x01F00000
|
|
1150000 0 0x4 0 0x02000000 0x01F00000
|
|
1250000 0 0x8 0 0x02000000 0x01F00000
|
|
>;
|
|
};
|
|
|
|
abb_dspeve: regulator-abb-dspeve {
|
|
compatible = "ti,abb-v3";
|
|
regulator-name = "abb_dspeve";
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
clocks = <&sys_clkin1>;
|
|
ti,settling-time = <50>;
|
|
ti,clock-cycles = <16>;
|
|
|
|
reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
|
|
<0x4ae06010 0x4>, <0x4a0025e0 0xc>,
|
|
<0x4a00246c 0x4>;
|
|
reg-names = "setup-address", "control-address",
|
|
"int-address", "efuse-address",
|
|
"ldo-address";
|
|
ti,tranxdone-status-mask = <0x20000000>;
|
|
/* LDOVBBDSPEVE_FBB_MUX_CTRL */
|
|
ti,ldovbb-override-mask = <0x400>;
|
|
/* LDOVBBDSPEVE_FBB_VSET_OUT */
|
|
ti,ldovbb-vset-mask = <0x1F>;
|
|
|
|
/*
|
|
* NOTE: only FBB mode used but actual vset will
|
|
* determine final biasing
|
|
*/
|
|
ti,abb_info = <
|
|
/*uV ABB efuse rbb_m fbb_m vset_m*/
|
|
1055000 0 0x0 0 0x02000000 0x01F00000
|
|
1150000 0 0x4 0 0x02000000 0x01F00000
|
|
1250000 0 0x8 0 0x02000000 0x01F00000
|
|
>;
|
|
};
|
|
|
|
abb_gpu: regulator-abb-gpu {
|
|
compatible = "ti,abb-v3";
|
|
regulator-name = "abb_gpu";
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
clocks = <&sys_clkin1>;
|
|
ti,settling-time = <50>;
|
|
ti,clock-cycles = <16>;
|
|
|
|
reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
|
|
<0x4ae06010 0x4>, <0x4a003b08 0xc>,
|
|
<0x4ae0c154 0x4>;
|
|
reg-names = "setup-address", "control-address",
|
|
"int-address", "efuse-address",
|
|
"ldo-address";
|
|
ti,tranxdone-status-mask = <0x10000000>;
|
|
/* LDOVBBGPU_FBB_MUX_CTRL */
|
|
ti,ldovbb-override-mask = <0x400>;
|
|
/* LDOVBBGPU_FBB_VSET_OUT */
|
|
ti,ldovbb-vset-mask = <0x1F>;
|
|
|
|
/*
|
|
* NOTE: only FBB mode used but actual vset will
|
|
* determine final biasing
|
|
*/
|
|
ti,abb_info = <
|
|
/*uV ABB efuse rbb_m fbb_m vset_m*/
|
|
1090000 0 0x0 0 0x02000000 0x01F00000
|
|
1210000 0 0x4 0 0x02000000 0x01F00000
|
|
1280000 0 0x8 0 0x02000000 0x01F00000
|
|
>;
|
|
};
|
|
|
|
mcspi1: spi@48098000 {
|
|
compatible = "ti,omap4-mcspi";
|
|
reg = <0x48098000 0x200>;
|
|
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "mcspi1";
|
|
ti,spi-num-cs = <4>;
|
|
dmas = <&sdma_xbar 35>,
|
|
<&sdma_xbar 36>,
|
|
<&sdma_xbar 37>,
|
|
<&sdma_xbar 38>,
|
|
<&sdma_xbar 39>,
|
|
<&sdma_xbar 40>,
|
|
<&sdma_xbar 41>,
|
|
<&sdma_xbar 42>;
|
|
dma-names = "tx0", "rx0", "tx1", "rx1",
|
|
"tx2", "rx2", "tx3", "rx3";
|
|
status = "disabled";
|
|
};
|
|
|
|
mcspi2: spi@4809a000 {
|
|
compatible = "ti,omap4-mcspi";
|
|
reg = <0x4809a000 0x200>;
|
|
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "mcspi2";
|
|
ti,spi-num-cs = <2>;
|
|
dmas = <&sdma_xbar 43>,
|
|
<&sdma_xbar 44>,
|
|
<&sdma_xbar 45>,
|
|
<&sdma_xbar 46>;
|
|
dma-names = "tx0", "rx0", "tx1", "rx1";
|
|
status = "disabled";
|
|
};
|
|
|
|
mcspi3: spi@480b8000 {
|
|
compatible = "ti,omap4-mcspi";
|
|
reg = <0x480b8000 0x200>;
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "mcspi3";
|
|
ti,spi-num-cs = <2>;
|
|
dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
|
|
dma-names = "tx0", "rx0";
|
|
status = "disabled";
|
|
};
|
|
|
|
mcspi4: spi@480ba000 {
|
|
compatible = "ti,omap4-mcspi";
|
|
reg = <0x480ba000 0x200>;
|
|
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "mcspi4";
|
|
ti,spi-num-cs = <1>;
|
|
dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
|
|
dma-names = "tx0", "rx0";
|
|
status = "disabled";
|
|
};
|
|
|
|
qspi: qspi@4b300000 {
|
|
compatible = "ti,dra7xxx-qspi";
|
|
reg = <0x4b300000 0x100>;
|
|
reg-names = "qspi_base";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "qspi";
|
|
clocks = <&qspi_gfclk_div>;
|
|
clock-names = "fck";
|
|
num-cs = <4>;
|
|
interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
omap_control_sata: control-phy@4a002374 {
|
|
compatible = "ti,control-phy-pipe3";
|
|
reg = <0x4a002374 0x4>;
|
|
reg-names = "power";
|
|
clocks = <&sys_clkin1>;
|
|
clock-names = "sysclk";
|
|
};
|
|
|
|
/* OCP2SCP3 */
|
|
ocp2scp@4a090000 {
|
|
compatible = "ti,omap-ocp2scp";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
reg = <0x4a090000 0x20>;
|
|
ti,hwmods = "ocp2scp3";
|
|
sata_phy: phy@4A096000 {
|
|
compatible = "ti,phy-pipe3-sata";
|
|
reg = <0x4A096000 0x80>, /* phy_rx */
|
|
<0x4A096400 0x64>, /* phy_tx */
|
|
<0x4A096800 0x40>; /* pll_ctrl */
|
|
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
|
|
ctrl-module = <&omap_control_sata>;
|
|
clocks = <&sys_clkin1>, <&sata_ref_clk>;
|
|
clock-names = "sysclk", "refclk";
|
|
syscon-pllreset = <&scm_conf 0x3fc>;
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
pcie1_phy: pciephy@4a094000 {
|
|
compatible = "ti,phy-pipe3-pcie";
|
|
reg = <0x4a094000 0x80>, /* phy_rx */
|
|
<0x4a094400 0x64>; /* phy_tx */
|
|
reg-names = "phy_rx", "phy_tx";
|
|
ctrl-module = <&omap_control_pcie1phy>;
|
|
clocks = <&dpll_pcie_ref_ck>,
|
|
<&dpll_pcie_ref_m2ldo_ck>,
|
|
<&optfclk_pciephy1_32khz>,
|
|
<&optfclk_pciephy1_clk>,
|
|
<&optfclk_pciephy1_div_clk>,
|
|
<&optfclk_pciephy_div>;
|
|
clock-names = "dpll_ref", "dpll_ref_m2",
|
|
"wkupclk", "refclk",
|
|
"div-clk", "phy-div";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
pcie2_phy: pciephy@4a095000 {
|
|
compatible = "ti,phy-pipe3-pcie";
|
|
reg = <0x4a095000 0x80>, /* phy_rx */
|
|
<0x4a095400 0x64>; /* phy_tx */
|
|
reg-names = "phy_rx", "phy_tx";
|
|
ctrl-module = <&omap_control_pcie2phy>;
|
|
clocks = <&dpll_pcie_ref_ck>,
|
|
<&dpll_pcie_ref_m2ldo_ck>,
|
|
<&optfclk_pciephy2_32khz>,
|
|
<&optfclk_pciephy2_clk>,
|
|
<&optfclk_pciephy2_div_clk>,
|
|
<&optfclk_pciephy_div>;
|
|
clock-names = "dpll_ref", "dpll_ref_m2",
|
|
"wkupclk", "refclk",
|
|
"div-clk", "phy-div";
|
|
#phy-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
sata: sata@4a141100 {
|
|
compatible = "snps,dwc-ahci";
|
|
reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
|
|
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
|
phys = <&sata_phy>;
|
|
phy-names = "sata-phy";
|
|
clocks = <&sata_ref_clk>;
|
|
ti,hwmods = "sata";
|
|
};
|
|
|
|
omap_control_pcie1phy: control-phy@0x4a003c40 {
|
|
compatible = "ti,control-phy-pcie";
|
|
reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
|
|
reg-names = "power", "control_sma", "pcie_pcs";
|
|
clocks = <&sys_clkin1>;
|
|
clock-names = "sysclk";
|
|
};
|
|
|
|
omap_control_pcie2phy: control-pcie@0x4a003c44 {
|
|
compatible = "ti,control-phy-pcie";
|
|
reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
|
|
reg-names = "power", "control_sma", "pcie_pcs";
|
|
clocks = <&sys_clkin1>;
|
|
clock-names = "sysclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
rtc: rtc@48838000 {
|
|
compatible = "ti,am3352-rtc";
|
|
reg = <0x48838000 0x100>;
|
|
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "rtcss";
|
|
clocks = <&sys_32k_ck>;
|
|
};
|
|
|
|
omap_control_usb2phy1: control-phy@4a002300 {
|
|
compatible = "ti,control-phy-usb2";
|
|
reg = <0x4a002300 0x4>;
|
|
reg-names = "power";
|
|
};
|
|
|
|
omap_control_usb3phy1: control-phy@4a002370 {
|
|
compatible = "ti,control-phy-pipe3";
|
|
reg = <0x4a002370 0x4>;
|
|
reg-names = "power";
|
|
};
|
|
|
|
omap_control_usb2phy2: control-phy@0x4a002e74 {
|
|
compatible = "ti,control-phy-usb2-dra7";
|
|
reg = <0x4a002e74 0x4>;
|
|
reg-names = "power";
|
|
};
|
|
|
|
/* OCP2SCP1 */
|
|
ocp2scp@4a080000 {
|
|
compatible = "ti,omap-ocp2scp";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
reg = <0x4a080000 0x20>;
|
|
ti,hwmods = "ocp2scp1";
|
|
|
|
usb2_phy1: phy@4a084000 {
|
|
compatible = "ti,omap-usb2";
|
|
reg = <0x4a084000 0x400>;
|
|
ctrl-module = <&omap_control_usb2phy1>;
|
|
clocks = <&usb_phy1_always_on_clk32k>,
|
|
<&usb_otg_ss1_refclk960m>;
|
|
clock-names = "wkupclk",
|
|
"refclk";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
usb2_phy2: phy@4a085000 {
|
|
compatible = "ti,omap-usb2";
|
|
reg = <0x4a085000 0x400>;
|
|
ctrl-module = <&omap_control_usb2phy2>;
|
|
clocks = <&usb_phy2_always_on_clk32k>,
|
|
<&usb_otg_ss2_refclk960m>;
|
|
clock-names = "wkupclk",
|
|
"refclk";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
usb3_phy1: phy@4a084400 {
|
|
compatible = "ti,omap-usb3";
|
|
reg = <0x4a084400 0x80>,
|
|
<0x4a084800 0x64>,
|
|
<0x4a084c00 0x40>;
|
|
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
|
|
ctrl-module = <&omap_control_usb3phy1>;
|
|
clocks = <&usb_phy3_always_on_clk32k>,
|
|
<&sys_clkin1>,
|
|
<&usb_otg_ss1_refclk960m>;
|
|
clock-names = "wkupclk",
|
|
"sysclk",
|
|
"refclk";
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|
|
|
|
omap_dwc3_1: omap_dwc3_1@48880000 {
|
|
compatible = "ti,dwc3";
|
|
ti,hwmods = "usb_otg_ss1";
|
|
reg = <0x48880000 0x10000>;
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
utmi-mode = <2>;
|
|
ranges;
|
|
usb1: usb@48890000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x48890000 0x17000>;
|
|
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "peripheral",
|
|
"host",
|
|
"otg";
|
|
phys = <&usb2_phy1>, <&usb3_phy1>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
tx-fifo-resize;
|
|
maximum-speed = "super-speed";
|
|
dr_mode = "otg";
|
|
snps,dis_u3_susphy_quirk;
|
|
snps,dis_u2_susphy_quirk;
|
|
};
|
|
};
|
|
|
|
omap_dwc3_2: omap_dwc3_2@488c0000 {
|
|
compatible = "ti,dwc3";
|
|
ti,hwmods = "usb_otg_ss2";
|
|
reg = <0x488c0000 0x10000>;
|
|
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
utmi-mode = <2>;
|
|
ranges;
|
|
usb2: usb@488d0000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x488d0000 0x17000>;
|
|
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "peripheral",
|
|
"host",
|
|
"otg";
|
|
phys = <&usb2_phy2>;
|
|
phy-names = "usb2-phy";
|
|
tx-fifo-resize;
|
|
maximum-speed = "high-speed";
|
|
dr_mode = "otg";
|
|
snps,dis_u3_susphy_quirk;
|
|
snps,dis_u2_susphy_quirk;
|
|
};
|
|
};
|
|
|
|
/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
|
|
omap_dwc3_3: omap_dwc3_3@48900000 {
|
|
compatible = "ti,dwc3";
|
|
ti,hwmods = "usb_otg_ss3";
|
|
reg = <0x48900000 0x10000>;
|
|
interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
utmi-mode = <2>;
|
|
ranges;
|
|
status = "disabled";
|
|
usb3: usb@48910000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x48910000 0x17000>;
|
|
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "peripheral",
|
|
"host",
|
|
"otg";
|
|
tx-fifo-resize;
|
|
maximum-speed = "high-speed";
|
|
dr_mode = "otg";
|
|
snps,dis_u3_susphy_quirk;
|
|
snps,dis_u2_susphy_quirk;
|
|
};
|
|
};
|
|
|
|
elm: elm@48078000 {
|
|
compatible = "ti,am3352-elm";
|
|
reg = <0x48078000 0xfc0>; /* device IO registers */
|
|
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "elm";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpmc: gpmc@50000000 {
|
|
compatible = "ti,am3352-gpmc";
|
|
ti,hwmods = "gpmc";
|
|
reg = <0x50000000 0x37c>; /* device IO registers */
|
|
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpmc,num-cs = <8>;
|
|
gpmc,num-waitpins = <2>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
atl: atl@4843c000 {
|
|
compatible = "ti,dra7-atl";
|
|
reg = <0x4843c000 0x3ff>;
|
|
ti,hwmods = "atl";
|
|
ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
|
|
<&atl_clkin2_ck>, <&atl_clkin3_ck>;
|
|
clocks = <&atl_gfclk_mux>;
|
|
clock-names = "fck";
|
|
status = "disabled";
|
|
};
|
|
|
|
crossbar_mpu: crossbar@4a002a48 {
|
|
compatible = "ti,irq-crossbar";
|
|
reg = <0x4a002a48 0x130>;
|
|
interrupt-controller;
|
|
interrupt-parent = <&wakeupgen>;
|
|
#interrupt-cells = <3>;
|
|
ti,max-irqs = <160>;
|
|
ti,max-crossbar-sources = <MAX_SOURCES>;
|
|
ti,reg-size = <2>;
|
|
ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
|
|
ti,irqs-skip = <10 133 139 140>;
|
|
ti,irqs-safe-map = <0>;
|
|
};
|
|
|
|
mac: ethernet@4a100000 {
|
|
compatible = "ti,dra7-cpsw","ti,cpsw";
|
|
ti,hwmods = "gmac";
|
|
clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>;
|
|
clock-names = "fck", "cpts";
|
|
cpdma_channels = <8>;
|
|
ale_entries = <1024>;
|
|
bd_ram_size = <0x2000>;
|
|
no_bd_ram = <0>;
|
|
rx_descs = <64>;
|
|
mac_control = <0x20>;
|
|
slaves = <2>;
|
|
active_slave = <0>;
|
|
cpts_clock_mult = <0x80000000>;
|
|
cpts_clock_shift = <29>;
|
|
reg = <0x48484000 0x1000
|
|
0x48485200 0x2E00>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
/*
|
|
* rx_thresh_pend
|
|
* rx_pend
|
|
* tx_pend
|
|
* misc_pend
|
|
*/
|
|
interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
|
|
ranges;
|
|
status = "disabled";
|
|
|
|
davinci_mdio: mdio@48485000 {
|
|
compatible = "ti,davinci_mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "davinci_mdio";
|
|
bus_freq = <1000000>;
|
|
reg = <0x48485000 0x100>;
|
|
};
|
|
|
|
cpsw_emac0: slave@48480200 {
|
|
/* Filled in by U-Boot */
|
|
mac-address = [ 00 00 00 00 00 00 ];
|
|
};
|
|
|
|
cpsw_emac1: slave@48480300 {
|
|
/* Filled in by U-Boot */
|
|
mac-address = [ 00 00 00 00 00 00 ];
|
|
};
|
|
|
|
phy_sel: cpsw-phy-sel@4a002554 {
|
|
compatible = "ti,dra7xx-cpsw-phy-sel";
|
|
reg= <0x4a002554 0x4>;
|
|
reg-names = "gmii-sel";
|
|
};
|
|
};
|
|
|
|
dcan1: can@481cc000 {
|
|
compatible = "ti,dra7-d_can";
|
|
ti,hwmods = "dcan1";
|
|
reg = <0x4ae3c000 0x2000>;
|
|
syscon-raminit = <&scm_conf 0x558 0>;
|
|
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&dcan1_sys_clk_mux>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dcan2: can@481d0000 {
|
|
compatible = "ti,dra7-d_can";
|
|
ti,hwmods = "dcan2";
|
|
reg = <0x48480000 0x2000>;
|
|
syscon-raminit = <&scm_conf 0x558 1>;
|
|
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&sys_clkin1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dss: dss@58000000 {
|
|
compatible = "ti,dra7-dss";
|
|
/* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
|
|
/* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
|
|
status = "disabled";
|
|
ti,hwmods = "dss_core";
|
|
/* CTRL_CORE_DSS_PLL_CONTROL */
|
|
syscon-pll-ctrl = <&scm_conf 0x538>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
dispc@58001000 {
|
|
compatible = "ti,dra7-dispc";
|
|
reg = <0x58001000 0x1000>;
|
|
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "dss_dispc";
|
|
clocks = <&dss_dss_clk>;
|
|
clock-names = "fck";
|
|
/* CTRL_CORE_SMA_SW_1 */
|
|
syscon-pol = <&scm_conf 0x534>;
|
|
};
|
|
|
|
hdmi: encoder@58060000 {
|
|
compatible = "ti,dra7-hdmi";
|
|
reg = <0x58040000 0x200>,
|
|
<0x58040200 0x80>,
|
|
<0x58040300 0x80>,
|
|
<0x58060000 0x19000>;
|
|
reg-names = "wp", "pll", "phy", "core";
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
ti,hwmods = "dss_hdmi";
|
|
clocks = <&dss_48mhz_clk>, <&dss_hdmi_clk>;
|
|
clock-names = "fck", "sys_clk";
|
|
};
|
|
};
|
|
};
|
|
|
|
thermal_zones: thermal-zones {
|
|
#include "omap4-cpu-thermal.dtsi"
|
|
#include "omap5-gpu-thermal.dtsi"
|
|
#include "omap5-core-thermal.dtsi"
|
|
};
|
|
|
|
};
|
|
|
|
&cpu_thermal {
|
|
polling-delay = <500>; /* milliseconds */
|
|
};
|
|
|
|
/include/ "dra7xx-clocks.dtsi"
|