OpenCloudOS-Kernel/drivers/net/wireless/rsi/rsi_91x_usb_ops.c

182 lines
5.1 KiB
C

/**
* Copyright (c) 2014 Redpine Signals Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include <linux/firmware.h>
#include "rsi_usb.h"
/**
* rsi_copy_to_card() - This function includes the actual funtionality of
* copying the TA firmware to the card.Basically this
* function includes opening the TA file,reading the TA
* file and writing their values in blocks of data.
* @common: Pointer to the driver private structure.
* @fw: Pointer to the firmware value to be written.
* @len: length of firmware file.
* @num_blocks: Number of blocks to be written to the card.
*
* Return: 0 on success and -1 on failure.
*/
static int rsi_copy_to_card(struct rsi_common *common,
const u8 *fw,
u32 len,
u32 num_blocks)
{
struct rsi_hw *adapter = common->priv;
struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
u32 indx, ii;
u32 block_size = dev->tx_blk_size;
u32 lsb_address;
u32 base_address;
base_address = TA_LOAD_ADDRESS;
for (indx = 0, ii = 0; ii < num_blocks; ii++, indx += block_size) {
lsb_address = base_address;
if (rsi_usb_write_register_multiple(adapter,
lsb_address,
(u8 *)(fw + indx),
block_size)) {
rsi_dbg(ERR_ZONE,
"%s: Unable to load %s blk\n", __func__,
FIRMWARE_RSI9113);
return -EIO;
}
rsi_dbg(INIT_ZONE, "%s: loading block: %d\n", __func__, ii);
base_address += block_size;
}
if (len % block_size) {
lsb_address = base_address;
if (rsi_usb_write_register_multiple(adapter,
lsb_address,
(u8 *)(fw + indx),
len % block_size)) {
rsi_dbg(ERR_ZONE,
"%s: Unable to load %s blk\n", __func__,
FIRMWARE_RSI9113);
return -EIO;
}
}
rsi_dbg(INIT_ZONE,
"%s: Succesfully loaded %s instructions\n", __func__,
FIRMWARE_RSI9113);
rsi_dbg(INIT_ZONE, "%s: loaded firmware\n", __func__);
return 0;
}
/**
* rsi_usb_rx_thread() - This is a kernel thread to receive the packets from
* the USB device.
* @common: Pointer to the driver private structure.
*
* Return: None.
*/
void rsi_usb_rx_thread(struct rsi_common *common)
{
struct rsi_hw *adapter = common->priv;
struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
int status;
do {
rsi_wait_event(&dev->rx_thread.event, EVENT_WAIT_FOREVER);
if (atomic_read(&dev->rx_thread.thread_done))
goto out;
mutex_lock(&common->tx_rxlock);
status = rsi_read_pkt(common, 0);
if (status) {
rsi_dbg(ERR_ZONE, "%s: Failed To read data", __func__);
mutex_unlock(&common->tx_rxlock);
return;
}
mutex_unlock(&common->tx_rxlock);
rsi_reset_event(&dev->rx_thread.event);
if (adapter->rx_urb_submit(adapter)) {
rsi_dbg(ERR_ZONE,
"%s: Failed in urb submission", __func__);
return;
}
} while (1);
out:
rsi_dbg(INFO_ZONE, "%s: Terminated thread\n", __func__);
complete_and_exit(&dev->rx_thread.completion, 0);
}
/**
* rsi_load_ta_instructions() - This function includes the actual funtionality
* of loading the TA firmware.This function also
* includes opening the TA file,reading the TA
* file and writing their value in blocks of data.
* @common: Pointer to the driver private structure.
*
* Return: status: 0 on success, -1 on failure.
*/
static int rsi_load_ta_instructions(struct rsi_common *common)
{
struct rsi_hw *adapter = common->priv;
struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
const struct firmware *fw_entry = NULL;
u32 block_size = dev->tx_blk_size;
const u8 *fw;
u32 num_blocks, len;
int status = 0;
status = request_firmware(&fw_entry, FIRMWARE_RSI9113, adapter->device);
if (status < 0) {
rsi_dbg(ERR_ZONE, "%s Firmware file %s not found\n",
__func__, FIRMWARE_RSI9113);
return status;
}
/* Copy firmware into DMA-accessible memory */
fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
if (!fw)
return -ENOMEM;
len = fw_entry->size;
if (len % 4)
len += (4 - (len % 4));
num_blocks = (len / block_size);
rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len);
rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);
status = rsi_copy_to_card(common, fw, len, num_blocks);
kfree(fw);
release_firmware(fw_entry);
return status;
}
/**
* rsi_device_init() - This Function Initializes The HAL.
* @common: Pointer to the driver private structure.
*
* Return: 0 on success, -1 on failure.
*/
int rsi_usb_device_init(struct rsi_common *common)
{
if (rsi_load_ta_instructions(common))
return -EIO;
return 0;
}