OpenCloudOS-Kernel/drivers/scsi/qla4xxx/ql4_os.c

4095 lines
113 KiB
C

/*
* QLogic iSCSI HBA Driver
* Copyright (c) 2003-2010 QLogic Corporation
*
* See LICENSE.qla4xxx for copyright and licensing details.
*/
#include <linux/moduleparam.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/iscsi_boot_sysfs.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
#include "ql4_def.h"
#include "ql4_version.h"
#include "ql4_glbl.h"
#include "ql4_dbg.h"
#include "ql4_inline.h"
/*
* Driver version
*/
static char qla4xxx_version_str[40];
/*
* SRB allocation cache
*/
static struct kmem_cache *srb_cachep;
/*
* Module parameter information and variables
*/
int ql4xdontresethba = 0;
module_param(ql4xdontresethba, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(ql4xdontresethba,
"Don't reset the HBA for driver recovery \n"
" 0 - It will reset HBA (Default)\n"
" 1 - It will NOT reset HBA");
int ql4xextended_error_logging = 0; /* 0 = off, 1 = log errors */
module_param(ql4xextended_error_logging, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(ql4xextended_error_logging,
"Option to enable extended error logging, "
"Default is 0 - no logging, 1 - debug logging");
int ql4xenablemsix = 1;
module_param(ql4xenablemsix, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql4xenablemsix,
"Set to enable MSI or MSI-X interrupt mechanism.\n"
" 0 = enable INTx interrupt mechanism.\n"
" 1 = enable MSI-X interrupt mechanism (Default).\n"
" 2 = enable MSI interrupt mechanism.");
#define QL4_DEF_QDEPTH 32
static int ql4xmaxqdepth = QL4_DEF_QDEPTH;
module_param(ql4xmaxqdepth, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(ql4xmaxqdepth,
"Maximum queue depth to report for target devices.\n"
" Default: 32.");
static int ql4xsess_recovery_tmo = QL4_SESS_RECOVERY_TMO;
module_param(ql4xsess_recovery_tmo, int, S_IRUGO);
MODULE_PARM_DESC(ql4xsess_recovery_tmo,
"Target Session Recovery Timeout.\n"
" Default: 30 sec.");
static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha);
/*
* SCSI host template entry points
*/
static void qla4xxx_config_dma_addressing(struct scsi_qla_host *ha);
/*
* iSCSI template entry points
*/
static int qla4xxx_conn_get_param(struct iscsi_cls_conn *conn,
enum iscsi_param param, char *buf);
static int qla4xxx_host_get_param(struct Scsi_Host *shost,
enum iscsi_host_param param, char *buf);
static int qla4xxx_iface_set_param(struct Scsi_Host *shost, char *data,
int count);
static int qla4xxx_get_iface_param(struct iscsi_iface *iface,
enum iscsi_param_type param_type,
int param, char *buf);
static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc);
static struct iscsi_endpoint *qla4xxx_ep_connect(struct Scsi_Host *shost,
struct sockaddr *dst_addr,
int non_blocking);
static int qla4xxx_ep_poll(struct iscsi_endpoint *ep, int timeout_ms);
static void qla4xxx_ep_disconnect(struct iscsi_endpoint *ep);
static int qla4xxx_get_ep_param(struct iscsi_endpoint *ep,
enum iscsi_param param, char *buf);
static int qla4xxx_conn_start(struct iscsi_cls_conn *conn);
static struct iscsi_cls_conn *
qla4xxx_conn_create(struct iscsi_cls_session *cls_sess, uint32_t conn_idx);
static int qla4xxx_conn_bind(struct iscsi_cls_session *cls_session,
struct iscsi_cls_conn *cls_conn,
uint64_t transport_fd, int is_leading);
static void qla4xxx_conn_destroy(struct iscsi_cls_conn *conn);
static struct iscsi_cls_session *
qla4xxx_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max,
uint16_t qdepth, uint32_t initial_cmdsn);
static void qla4xxx_session_destroy(struct iscsi_cls_session *sess);
static void qla4xxx_task_work(struct work_struct *wdata);
static int qla4xxx_alloc_pdu(struct iscsi_task *, uint8_t);
static int qla4xxx_task_xmit(struct iscsi_task *);
static void qla4xxx_task_cleanup(struct iscsi_task *);
static void qla4xxx_fail_session(struct iscsi_cls_session *cls_session);
static void qla4xxx_conn_get_stats(struct iscsi_cls_conn *cls_conn,
struct iscsi_stats *stats);
/*
* SCSI host template entry points
*/
static int qla4xxx_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *cmd);
static int qla4xxx_eh_abort(struct scsi_cmnd *cmd);
static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd);
static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd);
static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd);
static int qla4xxx_slave_alloc(struct scsi_device *device);
static int qla4xxx_slave_configure(struct scsi_device *device);
static void qla4xxx_slave_destroy(struct scsi_device *sdev);
static mode_t ql4_attr_is_visible(int param_type, int param);
static struct qla4_8xxx_legacy_intr_set legacy_intr[] =
QLA82XX_LEGACY_INTR_CONFIG;
static struct scsi_host_template qla4xxx_driver_template = {
.module = THIS_MODULE,
.name = DRIVER_NAME,
.proc_name = DRIVER_NAME,
.queuecommand = qla4xxx_queuecommand,
.eh_abort_handler = qla4xxx_eh_abort,
.eh_device_reset_handler = qla4xxx_eh_device_reset,
.eh_target_reset_handler = qla4xxx_eh_target_reset,
.eh_host_reset_handler = qla4xxx_eh_host_reset,
.eh_timed_out = qla4xxx_eh_cmd_timed_out,
.slave_configure = qla4xxx_slave_configure,
.slave_alloc = qla4xxx_slave_alloc,
.slave_destroy = qla4xxx_slave_destroy,
.this_id = -1,
.cmd_per_lun = 3,
.use_clustering = ENABLE_CLUSTERING,
.sg_tablesize = SG_ALL,
.max_sectors = 0xFFFF,
.shost_attrs = qla4xxx_host_attrs,
.vendor_id = SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_QLOGIC,
};
static struct iscsi_transport qla4xxx_iscsi_transport = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
.caps = CAP_TEXT_NEGO |
CAP_DATA_PATH_OFFLOAD | CAP_HDRDGST |
CAP_DATADGST | CAP_LOGIN_OFFLOAD |
CAP_MULTI_R2T,
.attr_is_visible = ql4_attr_is_visible,
.create_session = qla4xxx_session_create,
.destroy_session = qla4xxx_session_destroy,
.start_conn = qla4xxx_conn_start,
.create_conn = qla4xxx_conn_create,
.bind_conn = qla4xxx_conn_bind,
.stop_conn = iscsi_conn_stop,
.destroy_conn = qla4xxx_conn_destroy,
.set_param = iscsi_set_param,
.get_conn_param = qla4xxx_conn_get_param,
.get_session_param = iscsi_session_get_param,
.get_ep_param = qla4xxx_get_ep_param,
.ep_connect = qla4xxx_ep_connect,
.ep_poll = qla4xxx_ep_poll,
.ep_disconnect = qla4xxx_ep_disconnect,
.get_stats = qla4xxx_conn_get_stats,
.send_pdu = iscsi_conn_send_pdu,
.xmit_task = qla4xxx_task_xmit,
.cleanup_task = qla4xxx_task_cleanup,
.alloc_pdu = qla4xxx_alloc_pdu,
.get_host_param = qla4xxx_host_get_param,
.set_iface_param = qla4xxx_iface_set_param,
.get_iface_param = qla4xxx_get_iface_param,
.bsg_request = qla4xxx_bsg_request,
};
static struct scsi_transport_template *qla4xxx_scsi_transport;
static mode_t ql4_attr_is_visible(int param_type, int param)
{
switch (param_type) {
case ISCSI_HOST_PARAM:
switch (param) {
case ISCSI_HOST_PARAM_HWADDRESS:
case ISCSI_HOST_PARAM_IPADDRESS:
case ISCSI_HOST_PARAM_INITIATOR_NAME:
return S_IRUGO;
default:
return 0;
}
case ISCSI_PARAM:
switch (param) {
case ISCSI_PARAM_CONN_ADDRESS:
case ISCSI_PARAM_CONN_PORT:
case ISCSI_PARAM_TARGET_NAME:
case ISCSI_PARAM_TPGT:
case ISCSI_PARAM_TARGET_ALIAS:
case ISCSI_PARAM_MAX_BURST:
case ISCSI_PARAM_MAX_R2T:
case ISCSI_PARAM_FIRST_BURST:
case ISCSI_PARAM_MAX_RECV_DLENGTH:
case ISCSI_PARAM_MAX_XMIT_DLENGTH:
return S_IRUGO;
default:
return 0;
}
case ISCSI_NET_PARAM:
switch (param) {
case ISCSI_NET_PARAM_IPV4_ADDR:
case ISCSI_NET_PARAM_IPV4_SUBNET:
case ISCSI_NET_PARAM_IPV4_GW:
case ISCSI_NET_PARAM_IPV4_BOOTPROTO:
case ISCSI_NET_PARAM_IFACE_ENABLE:
case ISCSI_NET_PARAM_IPV6_LINKLOCAL:
case ISCSI_NET_PARAM_IPV6_ADDR:
case ISCSI_NET_PARAM_IPV6_ROUTER:
case ISCSI_NET_PARAM_IPV6_ADDR_AUTOCFG:
case ISCSI_NET_PARAM_IPV6_LINKLOCAL_AUTOCFG:
case ISCSI_NET_PARAM_VLAN_ID:
case ISCSI_NET_PARAM_VLAN_PRIORITY:
case ISCSI_NET_PARAM_VLAN_ENABLED:
case ISCSI_NET_PARAM_MTU:
return S_IRUGO;
default:
return 0;
}
}
return 0;
}
static int qla4xxx_get_iface_param(struct iscsi_iface *iface,
enum iscsi_param_type param_type,
int param, char *buf)
{
struct Scsi_Host *shost = iscsi_iface_to_shost(iface);
struct scsi_qla_host *ha = to_qla_host(shost);
int len = -ENOSYS;
if (param_type != ISCSI_NET_PARAM)
return -ENOSYS;
switch (param) {
case ISCSI_NET_PARAM_IPV4_ADDR:
len = sprintf(buf, "%pI4\n", &ha->ip_config.ip_address);
break;
case ISCSI_NET_PARAM_IPV4_SUBNET:
len = sprintf(buf, "%pI4\n", &ha->ip_config.subnet_mask);
break;
case ISCSI_NET_PARAM_IPV4_GW:
len = sprintf(buf, "%pI4\n", &ha->ip_config.gateway);
break;
case ISCSI_NET_PARAM_IFACE_ENABLE:
if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4)
len = sprintf(buf, "%s\n",
(ha->ip_config.ipv4_options &
IPOPT_IPV4_PROTOCOL_ENABLE) ?
"enabled" : "disabled");
else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV6)
len = sprintf(buf, "%s\n",
(ha->ip_config.ipv6_options &
IPV6_OPT_IPV6_PROTOCOL_ENABLE) ?
"enabled" : "disabled");
break;
case ISCSI_NET_PARAM_IPV4_BOOTPROTO:
len = sprintf(buf, "%s\n",
(ha->ip_config.tcp_options & TCPOPT_DHCP_ENABLE) ?
"dhcp" : "static");
break;
case ISCSI_NET_PARAM_IPV6_ADDR:
if (iface->iface_num == 0)
len = sprintf(buf, "%pI6\n", &ha->ip_config.ipv6_addr0);
if (iface->iface_num == 1)
len = sprintf(buf, "%pI6\n", &ha->ip_config.ipv6_addr1);
break;
case ISCSI_NET_PARAM_IPV6_LINKLOCAL:
len = sprintf(buf, "%pI6\n",
&ha->ip_config.ipv6_link_local_addr);
break;
case ISCSI_NET_PARAM_IPV6_ROUTER:
len = sprintf(buf, "%pI6\n",
&ha->ip_config.ipv6_default_router_addr);
break;
case ISCSI_NET_PARAM_IPV6_ADDR_AUTOCFG:
len = sprintf(buf, "%s\n",
(ha->ip_config.ipv6_addl_options &
IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE) ?
"nd" : "static");
break;
case ISCSI_NET_PARAM_IPV6_LINKLOCAL_AUTOCFG:
len = sprintf(buf, "%s\n",
(ha->ip_config.ipv6_addl_options &
IPV6_ADDOPT_AUTOCONFIG_LINK_LOCAL_ADDR) ?
"auto" : "static");
break;
case ISCSI_NET_PARAM_VLAN_ID:
if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4)
len = sprintf(buf, "%d\n",
(ha->ip_config.ipv4_vlan_tag &
ISCSI_MAX_VLAN_ID));
else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV6)
len = sprintf(buf, "%d\n",
(ha->ip_config.ipv6_vlan_tag &
ISCSI_MAX_VLAN_ID));
break;
case ISCSI_NET_PARAM_VLAN_PRIORITY:
if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4)
len = sprintf(buf, "%d\n",
((ha->ip_config.ipv4_vlan_tag >> 13) &
ISCSI_MAX_VLAN_PRIORITY));
else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV6)
len = sprintf(buf, "%d\n",
((ha->ip_config.ipv6_vlan_tag >> 13) &
ISCSI_MAX_VLAN_PRIORITY));
break;
case ISCSI_NET_PARAM_VLAN_ENABLED:
if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4)
len = sprintf(buf, "%s\n",
(ha->ip_config.ipv4_options &
IPOPT_VLAN_TAGGING_ENABLE) ?
"enabled" : "disabled");
else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV6)
len = sprintf(buf, "%s\n",
(ha->ip_config.ipv6_options &
IPV6_OPT_VLAN_TAGGING_ENABLE) ?
"enabled" : "disabled");
break;
case ISCSI_NET_PARAM_MTU:
len = sprintf(buf, "%d\n", ha->ip_config.eth_mtu_size);
break;
default:
len = -ENOSYS;
}
return len;
}
static struct iscsi_endpoint *
qla4xxx_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr,
int non_blocking)
{
int ret;
struct iscsi_endpoint *ep;
struct qla_endpoint *qla_ep;
struct scsi_qla_host *ha;
struct sockaddr_in *addr;
struct sockaddr_in6 *addr6;
DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
if (!shost) {
ret = -ENXIO;
printk(KERN_ERR "%s: shost is NULL\n",
__func__);
return ERR_PTR(ret);
}
ha = iscsi_host_priv(shost);
ep = iscsi_create_endpoint(sizeof(struct qla_endpoint));
if (!ep) {
ret = -ENOMEM;
return ERR_PTR(ret);
}
qla_ep = ep->dd_data;
memset(qla_ep, 0, sizeof(struct qla_endpoint));
if (dst_addr->sa_family == AF_INET) {
memcpy(&qla_ep->dst_addr, dst_addr, sizeof(struct sockaddr_in));
addr = (struct sockaddr_in *)&qla_ep->dst_addr;
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: %pI4\n", __func__,
(char *)&addr->sin_addr));
} else if (dst_addr->sa_family == AF_INET6) {
memcpy(&qla_ep->dst_addr, dst_addr,
sizeof(struct sockaddr_in6));
addr6 = (struct sockaddr_in6 *)&qla_ep->dst_addr;
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: %pI6\n", __func__,
(char *)&addr6->sin6_addr));
}
qla_ep->host = shost;
return ep;
}
static int qla4xxx_ep_poll(struct iscsi_endpoint *ep, int timeout_ms)
{
struct qla_endpoint *qla_ep;
struct scsi_qla_host *ha;
int ret = 0;
DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
qla_ep = ep->dd_data;
ha = to_qla_host(qla_ep->host);
if (adapter_up(ha))
ret = 1;
return ret;
}
static void qla4xxx_ep_disconnect(struct iscsi_endpoint *ep)
{
DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
iscsi_destroy_endpoint(ep);
}
static int qla4xxx_get_ep_param(struct iscsi_endpoint *ep,
enum iscsi_param param,
char *buf)
{
struct qla_endpoint *qla_ep = ep->dd_data;
struct sockaddr *dst_addr;
DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
switch (param) {
case ISCSI_PARAM_CONN_PORT:
case ISCSI_PARAM_CONN_ADDRESS:
if (!qla_ep)
return -ENOTCONN;
dst_addr = (struct sockaddr *)&qla_ep->dst_addr;
if (!dst_addr)
return -ENOTCONN;
return iscsi_conn_get_addr_param((struct sockaddr_storage *)
&qla_ep->dst_addr, param, buf);
default:
return -ENOSYS;
}
}
static void qla4xxx_conn_get_stats(struct iscsi_cls_conn *cls_conn,
struct iscsi_stats *stats)
{
struct iscsi_session *sess;
struct iscsi_cls_session *cls_sess;
struct ddb_entry *ddb_entry;
struct scsi_qla_host *ha;
struct ql_iscsi_stats *ql_iscsi_stats;
int stats_size;
int ret;
dma_addr_t iscsi_stats_dma;
DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
cls_sess = iscsi_conn_to_session(cls_conn);
sess = cls_sess->dd_data;
ddb_entry = sess->dd_data;
ha = ddb_entry->ha;
stats_size = PAGE_ALIGN(sizeof(struct ql_iscsi_stats));
/* Allocate memory */
ql_iscsi_stats = dma_alloc_coherent(&ha->pdev->dev, stats_size,
&iscsi_stats_dma, GFP_KERNEL);
if (!ql_iscsi_stats) {
ql4_printk(KERN_ERR, ha,
"Unable to allocate memory for iscsi stats\n");
goto exit_get_stats;
}
ret = qla4xxx_get_mgmt_data(ha, ddb_entry->fw_ddb_index, stats_size,
iscsi_stats_dma);
if (ret != QLA_SUCCESS) {
ql4_printk(KERN_ERR, ha,
"Unable to retreive iscsi stats\n");
goto free_stats;
}
/* octets */
stats->txdata_octets = le64_to_cpu(ql_iscsi_stats->tx_data_octets);
stats->rxdata_octets = le64_to_cpu(ql_iscsi_stats->rx_data_octets);
/* xmit pdus */
stats->noptx_pdus = le32_to_cpu(ql_iscsi_stats->tx_nopout_pdus);
stats->scsicmd_pdus = le32_to_cpu(ql_iscsi_stats->tx_scsi_cmd_pdus);
stats->tmfcmd_pdus = le32_to_cpu(ql_iscsi_stats->tx_tmf_cmd_pdus);
stats->login_pdus = le32_to_cpu(ql_iscsi_stats->tx_login_cmd_pdus);
stats->text_pdus = le32_to_cpu(ql_iscsi_stats->tx_text_cmd_pdus);
stats->dataout_pdus = le32_to_cpu(ql_iscsi_stats->tx_scsi_write_pdus);
stats->logout_pdus = le32_to_cpu(ql_iscsi_stats->tx_logout_cmd_pdus);
stats->snack_pdus = le32_to_cpu(ql_iscsi_stats->tx_snack_req_pdus);
/* recv pdus */
stats->noprx_pdus = le32_to_cpu(ql_iscsi_stats->rx_nopin_pdus);
stats->scsirsp_pdus = le32_to_cpu(ql_iscsi_stats->rx_scsi_resp_pdus);
stats->tmfrsp_pdus = le32_to_cpu(ql_iscsi_stats->rx_tmf_resp_pdus);
stats->textrsp_pdus = le32_to_cpu(ql_iscsi_stats->rx_text_resp_pdus);
stats->datain_pdus = le32_to_cpu(ql_iscsi_stats->rx_scsi_read_pdus);
stats->logoutrsp_pdus =
le32_to_cpu(ql_iscsi_stats->rx_logout_resp_pdus);
stats->r2t_pdus = le32_to_cpu(ql_iscsi_stats->rx_r2t_pdus);
stats->async_pdus = le32_to_cpu(ql_iscsi_stats->rx_async_pdus);
stats->rjt_pdus = le32_to_cpu(ql_iscsi_stats->rx_reject_pdus);
free_stats:
dma_free_coherent(&ha->pdev->dev, stats_size, ql_iscsi_stats,
iscsi_stats_dma);
exit_get_stats:
return;
}
static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc)
{
struct iscsi_cls_session *session;
struct iscsi_session *sess;
unsigned long flags;
enum blk_eh_timer_return ret = BLK_EH_NOT_HANDLED;
session = starget_to_session(scsi_target(sc->device));
sess = session->dd_data;
spin_lock_irqsave(&session->lock, flags);
if (session->state == ISCSI_SESSION_FAILED)
ret = BLK_EH_RESET_TIMER;
spin_unlock_irqrestore(&session->lock, flags);
return ret;
}
static int qla4xxx_host_get_param(struct Scsi_Host *shost,
enum iscsi_host_param param, char *buf)
{
struct scsi_qla_host *ha = to_qla_host(shost);
int len;
switch (param) {
case ISCSI_HOST_PARAM_HWADDRESS:
len = sysfs_format_mac(buf, ha->my_mac, MAC_ADDR_LEN);
break;
case ISCSI_HOST_PARAM_IPADDRESS:
len = sprintf(buf, "%pI4\n", &ha->ip_config.ip_address);
break;
case ISCSI_HOST_PARAM_INITIATOR_NAME:
len = sprintf(buf, "%s\n", ha->name_string);
break;
default:
return -ENOSYS;
}
return len;
}
static void qla4xxx_create_ipv4_iface(struct scsi_qla_host *ha)
{
if (ha->iface_ipv4)
return;
/* IPv4 */
ha->iface_ipv4 = iscsi_create_iface(ha->host,
&qla4xxx_iscsi_transport,
ISCSI_IFACE_TYPE_IPV4, 0, 0);
if (!ha->iface_ipv4)
ql4_printk(KERN_ERR, ha, "Could not create IPv4 iSCSI "
"iface0.\n");
}
static void qla4xxx_create_ipv6_iface(struct scsi_qla_host *ha)
{
if (!ha->iface_ipv6_0)
/* IPv6 iface-0 */
ha->iface_ipv6_0 = iscsi_create_iface(ha->host,
&qla4xxx_iscsi_transport,
ISCSI_IFACE_TYPE_IPV6, 0,
0);
if (!ha->iface_ipv6_0)
ql4_printk(KERN_ERR, ha, "Could not create IPv6 iSCSI "
"iface0.\n");
if (!ha->iface_ipv6_1)
/* IPv6 iface-1 */
ha->iface_ipv6_1 = iscsi_create_iface(ha->host,
&qla4xxx_iscsi_transport,
ISCSI_IFACE_TYPE_IPV6, 1,
0);
if (!ha->iface_ipv6_1)
ql4_printk(KERN_ERR, ha, "Could not create IPv6 iSCSI "
"iface1.\n");
}
static void qla4xxx_create_ifaces(struct scsi_qla_host *ha)
{
if (ha->ip_config.ipv4_options & IPOPT_IPV4_PROTOCOL_ENABLE)
qla4xxx_create_ipv4_iface(ha);
if (ha->ip_config.ipv6_options & IPV6_OPT_IPV6_PROTOCOL_ENABLE)
qla4xxx_create_ipv6_iface(ha);
}
static void qla4xxx_destroy_ipv4_iface(struct scsi_qla_host *ha)
{
if (ha->iface_ipv4) {
iscsi_destroy_iface(ha->iface_ipv4);
ha->iface_ipv4 = NULL;
}
}
static void qla4xxx_destroy_ipv6_iface(struct scsi_qla_host *ha)
{
if (ha->iface_ipv6_0) {
iscsi_destroy_iface(ha->iface_ipv6_0);
ha->iface_ipv6_0 = NULL;
}
if (ha->iface_ipv6_1) {
iscsi_destroy_iface(ha->iface_ipv6_1);
ha->iface_ipv6_1 = NULL;
}
}
static void qla4xxx_destroy_ifaces(struct scsi_qla_host *ha)
{
qla4xxx_destroy_ipv4_iface(ha);
qla4xxx_destroy_ipv6_iface(ha);
}
static void qla4xxx_set_ipv6(struct scsi_qla_host *ha,
struct iscsi_iface_param_info *iface_param,
struct addr_ctrl_blk *init_fw_cb)
{
/*
* iface_num 0 is valid for IPv6 Addr, linklocal, router, autocfg.
* iface_num 1 is valid only for IPv6 Addr.
*/
switch (iface_param->param) {
case ISCSI_NET_PARAM_IPV6_ADDR:
if (iface_param->iface_num & 0x1)
/* IPv6 Addr 1 */
memcpy(init_fw_cb->ipv6_addr1, iface_param->value,
sizeof(init_fw_cb->ipv6_addr1));
else
/* IPv6 Addr 0 */
memcpy(init_fw_cb->ipv6_addr0, iface_param->value,
sizeof(init_fw_cb->ipv6_addr0));
break;
case ISCSI_NET_PARAM_IPV6_LINKLOCAL:
if (iface_param->iface_num & 0x1)
break;
memcpy(init_fw_cb->ipv6_if_id, &iface_param->value[8],
sizeof(init_fw_cb->ipv6_if_id));
break;
case ISCSI_NET_PARAM_IPV6_ROUTER:
if (iface_param->iface_num & 0x1)
break;
memcpy(init_fw_cb->ipv6_dflt_rtr_addr, iface_param->value,
sizeof(init_fw_cb->ipv6_dflt_rtr_addr));
break;
case ISCSI_NET_PARAM_IPV6_ADDR_AUTOCFG:
/* Autocfg applies to even interface */
if (iface_param->iface_num & 0x1)
break;
if (iface_param->value[0] == ISCSI_IPV6_AUTOCFG_DISABLE)
init_fw_cb->ipv6_addtl_opts &=
cpu_to_le16(
~IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE);
else if (iface_param->value[0] == ISCSI_IPV6_AUTOCFG_ND_ENABLE)
init_fw_cb->ipv6_addtl_opts |=
cpu_to_le16(
IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE);
else
ql4_printk(KERN_ERR, ha, "Invalid autocfg setting for "
"IPv6 addr\n");
break;
case ISCSI_NET_PARAM_IPV6_LINKLOCAL_AUTOCFG:
/* Autocfg applies to even interface */
if (iface_param->iface_num & 0x1)
break;
if (iface_param->value[0] ==
ISCSI_IPV6_LINKLOCAL_AUTOCFG_ENABLE)
init_fw_cb->ipv6_addtl_opts |= cpu_to_le16(
IPV6_ADDOPT_AUTOCONFIG_LINK_LOCAL_ADDR);
else if (iface_param->value[0] ==
ISCSI_IPV6_LINKLOCAL_AUTOCFG_DISABLE)
init_fw_cb->ipv6_addtl_opts &= cpu_to_le16(
~IPV6_ADDOPT_AUTOCONFIG_LINK_LOCAL_ADDR);
else
ql4_printk(KERN_ERR, ha, "Invalid autocfg setting for "
"IPv6 linklocal addr\n");
break;
case ISCSI_NET_PARAM_IPV6_ROUTER_AUTOCFG:
/* Autocfg applies to even interface */
if (iface_param->iface_num & 0x1)
break;
if (iface_param->value[0] == ISCSI_IPV6_ROUTER_AUTOCFG_ENABLE)
memset(init_fw_cb->ipv6_dflt_rtr_addr, 0,
sizeof(init_fw_cb->ipv6_dflt_rtr_addr));
break;
case ISCSI_NET_PARAM_IFACE_ENABLE:
if (iface_param->value[0] == ISCSI_IFACE_ENABLE) {
init_fw_cb->ipv6_opts |=
cpu_to_le16(IPV6_OPT_IPV6_PROTOCOL_ENABLE);
qla4xxx_create_ipv6_iface(ha);
} else {
init_fw_cb->ipv6_opts &=
cpu_to_le16(~IPV6_OPT_IPV6_PROTOCOL_ENABLE &
0xFFFF);
qla4xxx_destroy_ipv6_iface(ha);
}
break;
case ISCSI_NET_PARAM_VLAN_ID:
if (iface_param->len != sizeof(init_fw_cb->ipv6_vlan_tag))
break;
init_fw_cb->ipv6_vlan_tag =
cpu_to_be16(*(uint16_t *)iface_param->value);
break;
case ISCSI_NET_PARAM_VLAN_ENABLED:
if (iface_param->value[0] == ISCSI_VLAN_ENABLE)
init_fw_cb->ipv6_opts |=
cpu_to_le16(IPV6_OPT_VLAN_TAGGING_ENABLE);
else
init_fw_cb->ipv6_opts &=
cpu_to_le16(~IPV6_OPT_VLAN_TAGGING_ENABLE);
break;
case ISCSI_NET_PARAM_MTU:
init_fw_cb->eth_mtu_size =
cpu_to_le16(*(uint16_t *)iface_param->value);
break;
default:
ql4_printk(KERN_ERR, ha, "Unknown IPv6 param = %d\n",
iface_param->param);
break;
}
}
static void qla4xxx_set_ipv4(struct scsi_qla_host *ha,
struct iscsi_iface_param_info *iface_param,
struct addr_ctrl_blk *init_fw_cb)
{
switch (iface_param->param) {
case ISCSI_NET_PARAM_IPV4_ADDR:
memcpy(init_fw_cb->ipv4_addr, iface_param->value,
sizeof(init_fw_cb->ipv4_addr));
break;
case ISCSI_NET_PARAM_IPV4_SUBNET:
memcpy(init_fw_cb->ipv4_subnet, iface_param->value,
sizeof(init_fw_cb->ipv4_subnet));
break;
case ISCSI_NET_PARAM_IPV4_GW:
memcpy(init_fw_cb->ipv4_gw_addr, iface_param->value,
sizeof(init_fw_cb->ipv4_gw_addr));
break;
case ISCSI_NET_PARAM_IPV4_BOOTPROTO:
if (iface_param->value[0] == ISCSI_BOOTPROTO_DHCP)
init_fw_cb->ipv4_tcp_opts |=
cpu_to_le16(TCPOPT_DHCP_ENABLE);
else if (iface_param->value[0] == ISCSI_BOOTPROTO_STATIC)
init_fw_cb->ipv4_tcp_opts &=
cpu_to_le16(~TCPOPT_DHCP_ENABLE);
else
ql4_printk(KERN_ERR, ha, "Invalid IPv4 bootproto\n");
break;
case ISCSI_NET_PARAM_IFACE_ENABLE:
if (iface_param->value[0] == ISCSI_IFACE_ENABLE) {
init_fw_cb->ipv4_ip_opts |=
cpu_to_le16(IPOPT_IPV4_PROTOCOL_ENABLE);
qla4xxx_create_ipv4_iface(ha);
} else {
init_fw_cb->ipv4_ip_opts &=
cpu_to_le16(~IPOPT_IPV4_PROTOCOL_ENABLE &
0xFFFF);
qla4xxx_destroy_ipv4_iface(ha);
}
break;
case ISCSI_NET_PARAM_VLAN_ID:
if (iface_param->len != sizeof(init_fw_cb->ipv4_vlan_tag))
break;
init_fw_cb->ipv4_vlan_tag =
cpu_to_be16(*(uint16_t *)iface_param->value);
break;
case ISCSI_NET_PARAM_VLAN_ENABLED:
if (iface_param->value[0] == ISCSI_VLAN_ENABLE)
init_fw_cb->ipv4_ip_opts |=
cpu_to_le16(IPOPT_VLAN_TAGGING_ENABLE);
else
init_fw_cb->ipv4_ip_opts &=
cpu_to_le16(~IPOPT_VLAN_TAGGING_ENABLE);
break;
case ISCSI_NET_PARAM_MTU:
init_fw_cb->eth_mtu_size =
cpu_to_le16(*(uint16_t *)iface_param->value);
break;
default:
ql4_printk(KERN_ERR, ha, "Unknown IPv4 param = %d\n",
iface_param->param);
break;
}
}
static void
qla4xxx_initcb_to_acb(struct addr_ctrl_blk *init_fw_cb)
{
struct addr_ctrl_blk_def *acb;
acb = (struct addr_ctrl_blk_def *)init_fw_cb;
memset(acb->reserved1, 0, sizeof(acb->reserved1));
memset(acb->reserved2, 0, sizeof(acb->reserved2));
memset(acb->reserved3, 0, sizeof(acb->reserved3));
memset(acb->reserved4, 0, sizeof(acb->reserved4));
memset(acb->reserved5, 0, sizeof(acb->reserved5));
memset(acb->reserved6, 0, sizeof(acb->reserved6));
memset(acb->reserved7, 0, sizeof(acb->reserved7));
memset(acb->reserved8, 0, sizeof(acb->reserved8));
memset(acb->reserved9, 0, sizeof(acb->reserved9));
memset(acb->reserved10, 0, sizeof(acb->reserved10));
memset(acb->reserved11, 0, sizeof(acb->reserved11));
memset(acb->reserved12, 0, sizeof(acb->reserved12));
memset(acb->reserved13, 0, sizeof(acb->reserved13));
memset(acb->reserved14, 0, sizeof(acb->reserved14));
memset(acb->reserved15, 0, sizeof(acb->reserved15));
}
static int
qla4xxx_iface_set_param(struct Scsi_Host *shost, char *data, int count)
{
struct scsi_qla_host *ha = to_qla_host(shost);
int rval = 0;
struct iscsi_iface_param_info *iface_param = NULL;
struct addr_ctrl_blk *init_fw_cb = NULL;
dma_addr_t init_fw_cb_dma;
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
uint32_t total_param_count;
uint32_t length;
init_fw_cb = dma_alloc_coherent(&ha->pdev->dev,
sizeof(struct addr_ctrl_blk),
&init_fw_cb_dma, GFP_KERNEL);
if (!init_fw_cb) {
ql4_printk(KERN_ERR, ha, "%s: Unable to alloc init_cb\n",
__func__);
return -ENOMEM;
}
memset(init_fw_cb, 0, sizeof(struct addr_ctrl_blk));
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_sts));
if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma)) {
ql4_printk(KERN_ERR, ha, "%s: get ifcb failed\n", __func__);
rval = -EIO;
goto exit_init_fw_cb;
}
total_param_count = count;
iface_param = (struct iscsi_iface_param_info *)data;
for ( ; total_param_count != 0; total_param_count--) {
length = iface_param->len;
if (iface_param->param_type != ISCSI_NET_PARAM)
continue;
switch (iface_param->iface_type) {
case ISCSI_IFACE_TYPE_IPV4:
switch (iface_param->iface_num) {
case 0:
qla4xxx_set_ipv4(ha, iface_param, init_fw_cb);
break;
default:
/* Cannot have more than one IPv4 interface */
ql4_printk(KERN_ERR, ha, "Invalid IPv4 iface "
"number = %d\n",
iface_param->iface_num);
break;
}
break;
case ISCSI_IFACE_TYPE_IPV6:
switch (iface_param->iface_num) {
case 0:
case 1:
qla4xxx_set_ipv6(ha, iface_param, init_fw_cb);
break;
default:
/* Cannot have more than two IPv6 interface */
ql4_printk(KERN_ERR, ha, "Invalid IPv6 iface "
"number = %d\n",
iface_param->iface_num);
break;
}
break;
default:
ql4_printk(KERN_ERR, ha, "Invalid iface type\n");
break;
}
iface_param = (struct iscsi_iface_param_info *)
((uint8_t *)iface_param +
sizeof(struct iscsi_iface_param_info) + length);
}
init_fw_cb->cookie = cpu_to_le32(0x11BEAD5A);
rval = qla4xxx_set_flash(ha, init_fw_cb_dma, FLASH_SEGMENT_IFCB,
sizeof(struct addr_ctrl_blk),
FLASH_OPT_RMW_COMMIT);
if (rval != QLA_SUCCESS) {
ql4_printk(KERN_ERR, ha, "%s: set flash mbx failed\n",
__func__);
rval = -EIO;
goto exit_init_fw_cb;
}
qla4xxx_disable_acb(ha);
qla4xxx_initcb_to_acb(init_fw_cb);
rval = qla4xxx_set_acb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma);
if (rval != QLA_SUCCESS) {
ql4_printk(KERN_ERR, ha, "%s: set acb mbx failed\n",
__func__);
rval = -EIO;
goto exit_init_fw_cb;
}
memset(init_fw_cb, 0, sizeof(struct addr_ctrl_blk));
qla4xxx_update_local_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb,
init_fw_cb_dma);
exit_init_fw_cb:
dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk),
init_fw_cb, init_fw_cb_dma);
return rval;
}
static int qla4xxx_conn_get_param(struct iscsi_cls_conn *cls_conn,
enum iscsi_param param, char *buf)
{
struct iscsi_conn *conn;
struct qla_conn *qla_conn;
struct sockaddr *dst_addr;
int len = 0;
conn = cls_conn->dd_data;
qla_conn = conn->dd_data;
dst_addr = &qla_conn->qla_ep->dst_addr;
switch (param) {
case ISCSI_PARAM_CONN_PORT:
case ISCSI_PARAM_CONN_ADDRESS:
return iscsi_conn_get_addr_param((struct sockaddr_storage *)
dst_addr, param, buf);
default:
return iscsi_conn_get_param(cls_conn, param, buf);
}
return len;
}
static struct iscsi_cls_session *
qla4xxx_session_create(struct iscsi_endpoint *ep,
uint16_t cmds_max, uint16_t qdepth,
uint32_t initial_cmdsn)
{
struct iscsi_cls_session *cls_sess;
struct scsi_qla_host *ha;
struct qla_endpoint *qla_ep;
struct ddb_entry *ddb_entry;
uint32_t ddb_index;
uint32_t mbx_sts = 0;
struct iscsi_session *sess;
struct sockaddr *dst_addr;
int ret;
DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
if (!ep) {
printk(KERN_ERR "qla4xxx: missing ep.\n");
return NULL;
}
qla_ep = ep->dd_data;
dst_addr = (struct sockaddr *)&qla_ep->dst_addr;
ha = to_qla_host(qla_ep->host);
get_ddb_index:
ddb_index = find_first_zero_bit(ha->ddb_idx_map, MAX_DDB_ENTRIES);
if (ddb_index >= MAX_DDB_ENTRIES) {
DEBUG2(ql4_printk(KERN_INFO, ha,
"Free DDB index not available\n"));
return NULL;
}
if (test_and_set_bit(ddb_index, ha->ddb_idx_map))
goto get_ddb_index;
DEBUG2(ql4_printk(KERN_INFO, ha,
"Found a free DDB index at %d\n", ddb_index));
ret = qla4xxx_req_ddb_entry(ha, ddb_index, &mbx_sts);
if (ret == QLA_ERROR) {
if (mbx_sts == MBOX_STS_COMMAND_ERROR) {
ql4_printk(KERN_INFO, ha,
"DDB index = %d not available trying next\n",
ddb_index);
goto get_ddb_index;
}
DEBUG2(ql4_printk(KERN_INFO, ha,
"Free FW DDB not available\n"));
return NULL;
}
cls_sess = iscsi_session_setup(&qla4xxx_iscsi_transport, qla_ep->host,
cmds_max, sizeof(struct ddb_entry),
sizeof(struct ql4_task_data),
initial_cmdsn, ddb_index);
if (!cls_sess)
return NULL;
sess = cls_sess->dd_data;
ddb_entry = sess->dd_data;
ddb_entry->fw_ddb_index = ddb_index;
ddb_entry->fw_ddb_device_state = DDB_DS_NO_CONNECTION_ACTIVE;
ddb_entry->ha = ha;
ddb_entry->sess = cls_sess;
cls_sess->recovery_tmo = ql4xsess_recovery_tmo;
ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] = ddb_entry;
ha->tot_ddbs++;
return cls_sess;
}
static void qla4xxx_session_destroy(struct iscsi_cls_session *cls_sess)
{
struct iscsi_session *sess;
struct ddb_entry *ddb_entry;
struct scsi_qla_host *ha;
unsigned long flags;
DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
sess = cls_sess->dd_data;
ddb_entry = sess->dd_data;
ha = ddb_entry->ha;
spin_lock_irqsave(&ha->hardware_lock, flags);
qla4xxx_free_ddb(ha, ddb_entry);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
iscsi_session_teardown(cls_sess);
}
static struct iscsi_cls_conn *
qla4xxx_conn_create(struct iscsi_cls_session *cls_sess, uint32_t conn_idx)
{
struct iscsi_cls_conn *cls_conn;
struct iscsi_session *sess;
struct ddb_entry *ddb_entry;
DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
cls_conn = iscsi_conn_setup(cls_sess, sizeof(struct qla_conn),
conn_idx);
sess = cls_sess->dd_data;
ddb_entry = sess->dd_data;
ddb_entry->conn = cls_conn;
return cls_conn;
}
static int qla4xxx_conn_bind(struct iscsi_cls_session *cls_session,
struct iscsi_cls_conn *cls_conn,
uint64_t transport_fd, int is_leading)
{
struct iscsi_conn *conn;
struct qla_conn *qla_conn;
struct iscsi_endpoint *ep;
DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
if (iscsi_conn_bind(cls_session, cls_conn, is_leading))
return -EINVAL;
ep = iscsi_lookup_endpoint(transport_fd);
conn = cls_conn->dd_data;
qla_conn = conn->dd_data;
qla_conn->qla_ep = ep->dd_data;
return 0;
}
static int qla4xxx_conn_start(struct iscsi_cls_conn *cls_conn)
{
struct iscsi_cls_session *cls_sess = iscsi_conn_to_session(cls_conn);
struct iscsi_session *sess;
struct ddb_entry *ddb_entry;
struct scsi_qla_host *ha;
struct dev_db_entry *fw_ddb_entry;
dma_addr_t fw_ddb_entry_dma;
uint32_t mbx_sts = 0;
int ret = 0;
int status = QLA_SUCCESS;
DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
sess = cls_sess->dd_data;
ddb_entry = sess->dd_data;
ha = ddb_entry->ha;
fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
&fw_ddb_entry_dma, GFP_KERNEL);
if (!fw_ddb_entry) {
ql4_printk(KERN_ERR, ha,
"%s: Unable to allocate dma buffer\n", __func__);
return -ENOMEM;
}
ret = qla4xxx_set_param_ddbentry(ha, ddb_entry, cls_conn, &mbx_sts);
if (ret) {
/* If iscsid is stopped and started then no need to do
* set param again since ddb state will be already
* active and FW does not allow set ddb to an
* active session.
*/
if (mbx_sts)
if (ddb_entry->fw_ddb_device_state ==
DDB_DS_SESSION_ACTIVE)
goto exit_set_param;
ql4_printk(KERN_ERR, ha, "%s: Failed set param for index[%d]\n",
__func__, ddb_entry->fw_ddb_index);
goto exit_conn_start;
}
status = qla4xxx_conn_open(ha, ddb_entry->fw_ddb_index);
if (status == QLA_ERROR) {
ql4_printk(KERN_ERR, ha, "%s: Login failed: %s\n", __func__,
sess->targetname);
ret = -EINVAL;
goto exit_conn_start;
}
ddb_entry->fw_ddb_device_state = DDB_DS_LOGIN_IN_PROCESS;
exit_set_param:
iscsi_conn_start(cls_conn);
ret = 0;
exit_conn_start:
dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
fw_ddb_entry, fw_ddb_entry_dma);
return ret;
}
static void qla4xxx_conn_destroy(struct iscsi_cls_conn *cls_conn)
{
struct iscsi_cls_session *cls_sess = iscsi_conn_to_session(cls_conn);
struct iscsi_session *sess;
struct scsi_qla_host *ha;
struct ddb_entry *ddb_entry;
int options;
DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
sess = cls_sess->dd_data;
ddb_entry = sess->dd_data;
ha = ddb_entry->ha;
options = LOGOUT_OPTION_CLOSE_SESSION;
if (qla4xxx_session_logout_ddb(ha, ddb_entry, options) == QLA_ERROR)
ql4_printk(KERN_ERR, ha, "%s: Logout failed\n", __func__);
else
qla4xxx_clear_ddb_entry(ha, ddb_entry->fw_ddb_index);
/*
* Clear the DDB bit so that next login can use the bit
* if FW is not clearing the DDB entry then set DDB will fail anyways
*/
clear_bit(ddb_entry->fw_ddb_index, ha->ddb_idx_map);
}
static void qla4xxx_task_work(struct work_struct *wdata)
{
struct ql4_task_data *task_data;
struct scsi_qla_host *ha;
struct passthru_status *sts;
struct iscsi_task *task;
struct iscsi_hdr *hdr;
uint8_t *data;
uint32_t data_len;
struct iscsi_conn *conn;
int hdr_len;
itt_t itt;
task_data = container_of(wdata, struct ql4_task_data, task_work);
ha = task_data->ha;
task = task_data->task;
sts = &task_data->sts;
hdr_len = sizeof(struct iscsi_hdr);
DEBUG3(printk(KERN_INFO "Status returned\n"));
DEBUG3(qla4xxx_dump_buffer(sts, 64));
DEBUG3(printk(KERN_INFO "Response buffer"));
DEBUG3(qla4xxx_dump_buffer(task_data->resp_buffer, 64));
conn = task->conn;
switch (sts->completionStatus) {
case PASSTHRU_STATUS_COMPLETE:
hdr = (struct iscsi_hdr *)task_data->resp_buffer;
/* Assign back the itt in hdr, until we use the PREASSIGN_TAG */
itt = sts->handle;
hdr->itt = itt;
data = task_data->resp_buffer + hdr_len;
data_len = task_data->resp_len - hdr_len;
iscsi_complete_pdu(conn, hdr, data, data_len);
break;
default:
ql4_printk(KERN_ERR, ha, "Passthru failed status = 0x%x\n",
sts->completionStatus);
break;
}
return;
}
static int qla4xxx_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
{
struct ql4_task_data *task_data;
struct iscsi_session *sess;
struct ddb_entry *ddb_entry;
struct scsi_qla_host *ha;
int hdr_len;
sess = task->conn->session;
ddb_entry = sess->dd_data;
ha = ddb_entry->ha;
task_data = task->dd_data;
memset(task_data, 0, sizeof(struct ql4_task_data));
if (task->sc) {
ql4_printk(KERN_INFO, ha,
"%s: SCSI Commands not implemented\n", __func__);
return -EINVAL;
}
hdr_len = sizeof(struct iscsi_hdr);
task_data->ha = ha;
task_data->task = task;
if (task->data_count) {
task_data->data_dma = dma_map_single(&ha->pdev->dev, task->data,
task->data_count,
PCI_DMA_TODEVICE);
}
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: MaxRecvLen %u, iscsi hrd %d\n",
__func__, task->conn->max_recv_dlength, hdr_len));
task_data->resp_len = task->conn->max_recv_dlength;
task_data->resp_buffer = dma_alloc_coherent(&ha->pdev->dev,
task_data->resp_len,
&task_data->resp_dma,
GFP_ATOMIC);
if (!task_data->resp_buffer)
goto exit_alloc_pdu;
task_data->req_buffer = dma_alloc_coherent(&ha->pdev->dev,
task->data_count + hdr_len,
&task_data->req_dma,
GFP_ATOMIC);
if (!task_data->req_buffer)
goto exit_alloc_pdu;
task->hdr = task_data->req_buffer;
INIT_WORK(&task_data->task_work, qla4xxx_task_work);
return 0;
exit_alloc_pdu:
if (task_data->resp_buffer)
dma_free_coherent(&ha->pdev->dev, task_data->resp_len,
task_data->resp_buffer, task_data->resp_dma);
if (task_data->req_buffer)
dma_free_coherent(&ha->pdev->dev, task->data_count + hdr_len,
task_data->req_buffer, task_data->req_dma);
return -ENOMEM;
}
static void qla4xxx_task_cleanup(struct iscsi_task *task)
{
struct ql4_task_data *task_data;
struct iscsi_session *sess;
struct ddb_entry *ddb_entry;
struct scsi_qla_host *ha;
int hdr_len;
hdr_len = sizeof(struct iscsi_hdr);
sess = task->conn->session;
ddb_entry = sess->dd_data;
ha = ddb_entry->ha;
task_data = task->dd_data;
if (task->data_count) {
dma_unmap_single(&ha->pdev->dev, task_data->data_dma,
task->data_count, PCI_DMA_TODEVICE);
}
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: MaxRecvLen %u, iscsi hrd %d\n",
__func__, task->conn->max_recv_dlength, hdr_len));
dma_free_coherent(&ha->pdev->dev, task_data->resp_len,
task_data->resp_buffer, task_data->resp_dma);
dma_free_coherent(&ha->pdev->dev, task->data_count + hdr_len,
task_data->req_buffer, task_data->req_dma);
return;
}
static int qla4xxx_task_xmit(struct iscsi_task *task)
{
struct scsi_cmnd *sc = task->sc;
struct iscsi_session *sess = task->conn->session;
struct ddb_entry *ddb_entry = sess->dd_data;
struct scsi_qla_host *ha = ddb_entry->ha;
if (!sc)
return qla4xxx_send_passthru0(task);
ql4_printk(KERN_INFO, ha, "%s: scsi cmd xmit not implemented\n",
__func__);
return -ENOSYS;
}
void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha,
struct ddb_entry *ddb_entry)
{
struct iscsi_cls_session *cls_sess;
struct iscsi_cls_conn *cls_conn;
struct iscsi_session *sess;
struct iscsi_conn *conn;
uint32_t ddb_state;
dma_addr_t fw_ddb_entry_dma;
struct dev_db_entry *fw_ddb_entry;
fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
&fw_ddb_entry_dma, GFP_KERNEL);
if (!fw_ddb_entry) {
ql4_printk(KERN_ERR, ha,
"%s: Unable to allocate dma buffer\n", __func__);
return;
}
if (qla4xxx_get_fwddb_entry(ha, ddb_entry->fw_ddb_index, fw_ddb_entry,
fw_ddb_entry_dma, NULL, NULL, &ddb_state,
NULL, NULL, NULL) == QLA_ERROR) {
DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
"get_ddb_entry for fw_ddb_index %d\n",
ha->host_no, __func__,
ddb_entry->fw_ddb_index));
return;
}
cls_sess = ddb_entry->sess;
sess = cls_sess->dd_data;
cls_conn = ddb_entry->conn;
conn = cls_conn->dd_data;
/* Update params */
conn->max_recv_dlength = BYTE_UNITS *
le16_to_cpu(fw_ddb_entry->iscsi_max_rcv_data_seg_len);
conn->max_xmit_dlength = BYTE_UNITS *
le16_to_cpu(fw_ddb_entry->iscsi_max_snd_data_seg_len);
sess->initial_r2t_en =
(BIT_10 & le16_to_cpu(fw_ddb_entry->iscsi_options));
sess->max_r2t = le16_to_cpu(fw_ddb_entry->iscsi_max_outsnd_r2t);
sess->imm_data_en = (BIT_11 & le16_to_cpu(fw_ddb_entry->iscsi_options));
sess->first_burst = BYTE_UNITS *
le16_to_cpu(fw_ddb_entry->iscsi_first_burst_len);
sess->max_burst = BYTE_UNITS *
le16_to_cpu(fw_ddb_entry->iscsi_max_burst_len);
sess->time2wait = le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait);
sess->time2retain = le16_to_cpu(fw_ddb_entry->iscsi_def_time2retain);
sess->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp);
memcpy(sess->initiatorname, ha->name_string,
min(sizeof(ha->name_string), sizeof(sess->initiatorname)));
}
/*
* Timer routines
*/
static void qla4xxx_start_timer(struct scsi_qla_host *ha, void *func,
unsigned long interval)
{
DEBUG(printk("scsi: %s: Starting timer thread for adapter %d\n",
__func__, ha->host->host_no));
init_timer(&ha->timer);
ha->timer.expires = jiffies + interval * HZ;
ha->timer.data = (unsigned long)ha;
ha->timer.function = (void (*)(unsigned long))func;
add_timer(&ha->timer);
ha->timer_active = 1;
}
static void qla4xxx_stop_timer(struct scsi_qla_host *ha)
{
del_timer_sync(&ha->timer);
ha->timer_active = 0;
}
/***
* qla4xxx_mark_device_missing - blocks the session
* @cls_session: Pointer to the session to be blocked
* @ddb_entry: Pointer to device database entry
*
* This routine marks a device missing and close connection.
**/
void qla4xxx_mark_device_missing(struct iscsi_cls_session *cls_session)
{
iscsi_block_session(cls_session);
}
/**
* qla4xxx_mark_all_devices_missing - mark all devices as missing.
* @ha: Pointer to host adapter structure.
*
* This routine marks a device missing and resets the relogin retry count.
**/
void qla4xxx_mark_all_devices_missing(struct scsi_qla_host *ha)
{
iscsi_host_for_each_session(ha->host, qla4xxx_mark_device_missing);
}
static struct srb* qla4xxx_get_new_srb(struct scsi_qla_host *ha,
struct ddb_entry *ddb_entry,
struct scsi_cmnd *cmd)
{
struct srb *srb;
srb = mempool_alloc(ha->srb_mempool, GFP_ATOMIC);
if (!srb)
return srb;
kref_init(&srb->srb_ref);
srb->ha = ha;
srb->ddb = ddb_entry;
srb->cmd = cmd;
srb->flags = 0;
CMD_SP(cmd) = (void *)srb;
return srb;
}
static void qla4xxx_srb_free_dma(struct scsi_qla_host *ha, struct srb *srb)
{
struct scsi_cmnd *cmd = srb->cmd;
if (srb->flags & SRB_DMA_VALID) {
scsi_dma_unmap(cmd);
srb->flags &= ~SRB_DMA_VALID;
}
CMD_SP(cmd) = NULL;
}
void qla4xxx_srb_compl(struct kref *ref)
{
struct srb *srb = container_of(ref, struct srb, srb_ref);
struct scsi_cmnd *cmd = srb->cmd;
struct scsi_qla_host *ha = srb->ha;
qla4xxx_srb_free_dma(ha, srb);
mempool_free(srb, ha->srb_mempool);
cmd->scsi_done(cmd);
}
/**
* qla4xxx_queuecommand - scsi layer issues scsi command to driver.
* @host: scsi host
* @cmd: Pointer to Linux's SCSI command structure
*
* Remarks:
* This routine is invoked by Linux to send a SCSI command to the driver.
* The mid-level driver tries to ensure that queuecommand never gets
* invoked concurrently with itself or the interrupt handler (although
* the interrupt handler may call this routine as part of request-
* completion handling). Unfortunely, it sometimes calls the scheduler
* in interrupt context which is a big NO! NO!.
**/
static int qla4xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
{
struct scsi_qla_host *ha = to_qla_host(host);
struct ddb_entry *ddb_entry = cmd->device->hostdata;
struct iscsi_cls_session *sess = ddb_entry->sess;
struct srb *srb;
int rval;
if (test_bit(AF_EEH_BUSY, &ha->flags)) {
if (test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags))
cmd->result = DID_NO_CONNECT << 16;
else
cmd->result = DID_REQUEUE << 16;
goto qc_fail_command;
}
if (!sess) {
cmd->result = DID_IMM_RETRY << 16;
goto qc_fail_command;
}
rval = iscsi_session_chkready(sess);
if (rval) {
cmd->result = rval;
goto qc_fail_command;
}
if (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) ||
test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA, &ha->dpc_flags) ||
test_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags) ||
test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags) ||
!test_bit(AF_ONLINE, &ha->flags) ||
!test_bit(AF_LINK_UP, &ha->flags) ||
test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags))
goto qc_host_busy;
srb = qla4xxx_get_new_srb(ha, ddb_entry, cmd);
if (!srb)
goto qc_host_busy;
rval = qla4xxx_send_command_to_isp(ha, srb);
if (rval != QLA_SUCCESS)
goto qc_host_busy_free_sp;
return 0;
qc_host_busy_free_sp:
qla4xxx_srb_free_dma(ha, srb);
mempool_free(srb, ha->srb_mempool);
qc_host_busy:
return SCSI_MLQUEUE_HOST_BUSY;
qc_fail_command:
cmd->scsi_done(cmd);
return 0;
}
/**
* qla4xxx_mem_free - frees memory allocated to adapter
* @ha: Pointer to host adapter structure.
*
* Frees memory previously allocated by qla4xxx_mem_alloc
**/
static void qla4xxx_mem_free(struct scsi_qla_host *ha)
{
if (ha->queues)
dma_free_coherent(&ha->pdev->dev, ha->queues_len, ha->queues,
ha->queues_dma);
ha->queues_len = 0;
ha->queues = NULL;
ha->queues_dma = 0;
ha->request_ring = NULL;
ha->request_dma = 0;
ha->response_ring = NULL;
ha->response_dma = 0;
ha->shadow_regs = NULL;
ha->shadow_regs_dma = 0;
/* Free srb pool. */
if (ha->srb_mempool)
mempool_destroy(ha->srb_mempool);
ha->srb_mempool = NULL;
if (ha->chap_dma_pool)
dma_pool_destroy(ha->chap_dma_pool);
/* release io space registers */
if (is_qla8022(ha)) {
if (ha->nx_pcibase)
iounmap(
(struct device_reg_82xx __iomem *)ha->nx_pcibase);
} else if (ha->reg)
iounmap(ha->reg);
pci_release_regions(ha->pdev);
}
/**
* qla4xxx_mem_alloc - allocates memory for use by adapter.
* @ha: Pointer to host adapter structure
*
* Allocates DMA memory for request and response queues. Also allocates memory
* for srbs.
**/
static int qla4xxx_mem_alloc(struct scsi_qla_host *ha)
{
unsigned long align;
/* Allocate contiguous block of DMA memory for queues. */
ha->queues_len = ((REQUEST_QUEUE_DEPTH * QUEUE_SIZE) +
(RESPONSE_QUEUE_DEPTH * QUEUE_SIZE) +
sizeof(struct shadow_regs) +
MEM_ALIGN_VALUE +
(PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
ha->queues = dma_alloc_coherent(&ha->pdev->dev, ha->queues_len,
&ha->queues_dma, GFP_KERNEL);
if (ha->queues == NULL) {
ql4_printk(KERN_WARNING, ha,
"Memory Allocation failed - queues.\n");
goto mem_alloc_error_exit;
}
memset(ha->queues, 0, ha->queues_len);
/*
* As per RISC alignment requirements -- the bus-address must be a
* multiple of the request-ring size (in bytes).
*/
align = 0;
if ((unsigned long)ha->queues_dma & (MEM_ALIGN_VALUE - 1))
align = MEM_ALIGN_VALUE - ((unsigned long)ha->queues_dma &
(MEM_ALIGN_VALUE - 1));
/* Update request and response queue pointers. */
ha->request_dma = ha->queues_dma + align;
ha->request_ring = (struct queue_entry *) (ha->queues + align);
ha->response_dma = ha->queues_dma + align +
(REQUEST_QUEUE_DEPTH * QUEUE_SIZE);
ha->response_ring = (struct queue_entry *) (ha->queues + align +
(REQUEST_QUEUE_DEPTH *
QUEUE_SIZE));
ha->shadow_regs_dma = ha->queues_dma + align +
(REQUEST_QUEUE_DEPTH * QUEUE_SIZE) +
(RESPONSE_QUEUE_DEPTH * QUEUE_SIZE);
ha->shadow_regs = (struct shadow_regs *) (ha->queues + align +
(REQUEST_QUEUE_DEPTH *
QUEUE_SIZE) +
(RESPONSE_QUEUE_DEPTH *
QUEUE_SIZE));
/* Allocate memory for srb pool. */
ha->srb_mempool = mempool_create(SRB_MIN_REQ, mempool_alloc_slab,
mempool_free_slab, srb_cachep);
if (ha->srb_mempool == NULL) {
ql4_printk(KERN_WARNING, ha,
"Memory Allocation failed - SRB Pool.\n");
goto mem_alloc_error_exit;
}
ha->chap_dma_pool = dma_pool_create("ql4_chap", &ha->pdev->dev,
CHAP_DMA_BLOCK_SIZE, 8, 0);
if (ha->chap_dma_pool == NULL) {
ql4_printk(KERN_WARNING, ha,
"%s: chap_dma_pool allocation failed..\n", __func__);
goto mem_alloc_error_exit;
}
return QLA_SUCCESS;
mem_alloc_error_exit:
qla4xxx_mem_free(ha);
return QLA_ERROR;
}
/**
* qla4_8xxx_check_fw_alive - Check firmware health
* @ha: Pointer to host adapter structure.
*
* Context: Interrupt
**/
static void qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha)
{
uint32_t fw_heartbeat_counter, halt_status;
fw_heartbeat_counter = qla4_8xxx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER);
/* If PEG_ALIVE_COUNTER is 0xffffffff, AER/EEH is in progress, ignore */
if (fw_heartbeat_counter == 0xffffffff) {
DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Device in frozen "
"state, QLA82XX_PEG_ALIVE_COUNTER is 0xffffffff\n",
ha->host_no, __func__));
return;
}
if (ha->fw_heartbeat_counter == fw_heartbeat_counter) {
ha->seconds_since_last_heartbeat++;
/* FW not alive after 2 seconds */
if (ha->seconds_since_last_heartbeat == 2) {
ha->seconds_since_last_heartbeat = 0;
halt_status = qla4_8xxx_rd_32(ha,
QLA82XX_PEG_HALT_STATUS1);
ql4_printk(KERN_INFO, ha,
"scsi(%ld): %s, Dumping hw/fw registers:\n "
" PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2:"
" 0x%x,\n PEG_NET_0_PC: 0x%x, PEG_NET_1_PC:"
" 0x%x,\n PEG_NET_2_PC: 0x%x, PEG_NET_3_PC:"
" 0x%x,\n PEG_NET_4_PC: 0x%x\n",
ha->host_no, __func__, halt_status,
qla4_8xxx_rd_32(ha,
QLA82XX_PEG_HALT_STATUS2),
qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_0 +
0x3c),
qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_1 +
0x3c),
qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_2 +
0x3c),
qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_3 +
0x3c),
qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_4 +
0x3c));
/* Since we cannot change dev_state in interrupt
* context, set appropriate DPC flag then wakeup
* DPC */
if (halt_status & HALT_STATUS_UNRECOVERABLE)
set_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags);
else {
printk("scsi%ld: %s: detect abort needed!\n",
ha->host_no, __func__);
set_bit(DPC_RESET_HA, &ha->dpc_flags);
}
qla4xxx_wake_dpc(ha);
qla4xxx_mailbox_premature_completion(ha);
}
} else
ha->seconds_since_last_heartbeat = 0;
ha->fw_heartbeat_counter = fw_heartbeat_counter;
}
/**
* qla4_8xxx_watchdog - Poll dev state
* @ha: Pointer to host adapter structure.
*
* Context: Interrupt
**/
void qla4_8xxx_watchdog(struct scsi_qla_host *ha)
{
uint32_t dev_state;
dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
/* don't poll if reset is going on */
if (!(test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA, &ha->dpc_flags) ||
test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags))) {
if (dev_state == QLA82XX_DEV_NEED_RESET &&
!test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
if (!ql4xdontresethba) {
ql4_printk(KERN_INFO, ha, "%s: HW State: "
"NEED RESET!\n", __func__);
set_bit(DPC_RESET_HA, &ha->dpc_flags);
qla4xxx_wake_dpc(ha);
qla4xxx_mailbox_premature_completion(ha);
}
} else if (dev_state == QLA82XX_DEV_NEED_QUIESCENT &&
!test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags)) {
ql4_printk(KERN_INFO, ha, "%s: HW State: NEED QUIES!\n",
__func__);
set_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags);
qla4xxx_wake_dpc(ha);
} else {
/* Check firmware health */
qla4_8xxx_check_fw_alive(ha);
}
}
}
/**
* qla4xxx_timer - checks every second for work to do.
* @ha: Pointer to host adapter structure.
**/
static void qla4xxx_timer(struct scsi_qla_host *ha)
{
int start_dpc = 0;
uint16_t w;
/* If we are in the middle of AER/EEH processing
* skip any processing and reschedule the timer
*/
if (test_bit(AF_EEH_BUSY, &ha->flags)) {
mod_timer(&ha->timer, jiffies + HZ);
return;
}
/* Hardware read to trigger an EEH error during mailbox waits. */
if (!pci_channel_offline(ha->pdev))
pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
if (is_qla8022(ha)) {
qla4_8xxx_watchdog(ha);
}
if (!is_qla8022(ha)) {
/* Check for heartbeat interval. */
if (ha->firmware_options & FWOPT_HEARTBEAT_ENABLE &&
ha->heartbeat_interval != 0) {
ha->seconds_since_last_heartbeat++;
if (ha->seconds_since_last_heartbeat >
ha->heartbeat_interval + 2)
set_bit(DPC_RESET_HA, &ha->dpc_flags);
}
}
/* Wakeup the dpc routine for this adapter, if needed. */
if (start_dpc ||
test_bit(DPC_RESET_HA, &ha->dpc_flags) ||
test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags) ||
test_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) ||
test_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags) ||
test_bit(DPC_LINK_CHANGED, &ha->dpc_flags) ||
test_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags) ||
test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags) ||
test_bit(DPC_AEN, &ha->dpc_flags)) {
DEBUG2(printk("scsi%ld: %s: scheduling dpc routine"
" - dpc flags = 0x%lx\n",
ha->host_no, __func__, ha->dpc_flags));
qla4xxx_wake_dpc(ha);
}
/* Reschedule timer thread to call us back in one second */
mod_timer(&ha->timer, jiffies + HZ);
DEBUG2(ha->seconds_since_last_intr++);
}
/**
* qla4xxx_cmd_wait - waits for all outstanding commands to complete
* @ha: Pointer to host adapter structure.
*
* This routine stalls the driver until all outstanding commands are returned.
* Caller must release the Hardware Lock prior to calling this routine.
**/
static int qla4xxx_cmd_wait(struct scsi_qla_host *ha)
{
uint32_t index = 0;
unsigned long flags;
struct scsi_cmnd *cmd;
unsigned long wtime = jiffies + (WAIT_CMD_TOV * HZ);
DEBUG2(ql4_printk(KERN_INFO, ha, "Wait up to %d seconds for cmds to "
"complete\n", WAIT_CMD_TOV));
while (!time_after_eq(jiffies, wtime)) {
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Find a command that hasn't completed. */
for (index = 0; index < ha->host->can_queue; index++) {
cmd = scsi_host_find_tag(ha->host, index);
/*
* We cannot just check if the index is valid,
* becase if we are run from the scsi eh, then
* the scsi/block layer is going to prevent
* the tag from being released.
*/
if (cmd != NULL && CMD_SP(cmd))
break;
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* If No Commands are pending, wait is complete */
if (index == ha->host->can_queue)
return QLA_SUCCESS;
msleep(1000);
}
/* If we timed out on waiting for commands to come back
* return ERROR. */
return QLA_ERROR;
}
int qla4xxx_hw_reset(struct scsi_qla_host *ha)
{
uint32_t ctrl_status;
unsigned long flags = 0;
DEBUG2(printk(KERN_ERR "scsi%ld: %s\n", ha->host_no, __func__));
if (ql4xxx_lock_drvr_wait(ha) != QLA_SUCCESS)
return QLA_ERROR;
spin_lock_irqsave(&ha->hardware_lock, flags);
/*
* If the SCSI Reset Interrupt bit is set, clear it.
* Otherwise, the Soft Reset won't work.
*/
ctrl_status = readw(&ha->reg->ctrl_status);
if ((ctrl_status & CSR_SCSI_RESET_INTR) != 0)
writel(set_rmask(CSR_SCSI_RESET_INTR), &ha->reg->ctrl_status);
/* Issue Soft Reset */
writel(set_rmask(CSR_SOFT_RESET), &ha->reg->ctrl_status);
readl(&ha->reg->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return QLA_SUCCESS;
}
/**
* qla4xxx_soft_reset - performs soft reset.
* @ha: Pointer to host adapter structure.
**/
int qla4xxx_soft_reset(struct scsi_qla_host *ha)
{
uint32_t max_wait_time;
unsigned long flags = 0;
int status;
uint32_t ctrl_status;
status = qla4xxx_hw_reset(ha);
if (status != QLA_SUCCESS)
return status;
status = QLA_ERROR;
/* Wait until the Network Reset Intr bit is cleared */
max_wait_time = RESET_INTR_TOV;
do {
spin_lock_irqsave(&ha->hardware_lock, flags);
ctrl_status = readw(&ha->reg->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if ((ctrl_status & CSR_NET_RESET_INTR) == 0)
break;
msleep(1000);
} while ((--max_wait_time));
if ((ctrl_status & CSR_NET_RESET_INTR) != 0) {
DEBUG2(printk(KERN_WARNING
"scsi%ld: Network Reset Intr not cleared by "
"Network function, clearing it now!\n",
ha->host_no));
spin_lock_irqsave(&ha->hardware_lock, flags);
writel(set_rmask(CSR_NET_RESET_INTR), &ha->reg->ctrl_status);
readl(&ha->reg->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
/* Wait until the firmware tells us the Soft Reset is done */
max_wait_time = SOFT_RESET_TOV;
do {
spin_lock_irqsave(&ha->hardware_lock, flags);
ctrl_status = readw(&ha->reg->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if ((ctrl_status & CSR_SOFT_RESET) == 0) {
status = QLA_SUCCESS;
break;
}
msleep(1000);
} while ((--max_wait_time));
/*
* Also, make sure that the SCSI Reset Interrupt bit has been cleared
* after the soft reset has taken place.
*/
spin_lock_irqsave(&ha->hardware_lock, flags);
ctrl_status = readw(&ha->reg->ctrl_status);
if ((ctrl_status & CSR_SCSI_RESET_INTR) != 0) {
writel(set_rmask(CSR_SCSI_RESET_INTR), &ha->reg->ctrl_status);
readl(&ha->reg->ctrl_status);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* If soft reset fails then most probably the bios on other
* function is also enabled.
* Since the initialization is sequential the other fn
* wont be able to acknowledge the soft reset.
* Issue a force soft reset to workaround this scenario.
*/
if (max_wait_time == 0) {
/* Issue Force Soft Reset */
spin_lock_irqsave(&ha->hardware_lock, flags);
writel(set_rmask(CSR_FORCE_SOFT_RESET), &ha->reg->ctrl_status);
readl(&ha->reg->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Wait until the firmware tells us the Soft Reset is done */
max_wait_time = SOFT_RESET_TOV;
do {
spin_lock_irqsave(&ha->hardware_lock, flags);
ctrl_status = readw(&ha->reg->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if ((ctrl_status & CSR_FORCE_SOFT_RESET) == 0) {
status = QLA_SUCCESS;
break;
}
msleep(1000);
} while ((--max_wait_time));
}
return status;
}
/**
* qla4xxx_abort_active_cmds - returns all outstanding i/o requests to O.S.
* @ha: Pointer to host adapter structure.
* @res: returned scsi status
*
* This routine is called just prior to a HARD RESET to return all
* outstanding commands back to the Operating System.
* Caller should make sure that the following locks are released
* before this calling routine: Hardware lock, and io_request_lock.
**/
static void qla4xxx_abort_active_cmds(struct scsi_qla_host *ha, int res)
{
struct srb *srb;
int i;
unsigned long flags;
spin_lock_irqsave(&ha->hardware_lock, flags);
for (i = 0; i < ha->host->can_queue; i++) {
srb = qla4xxx_del_from_active_array(ha, i);
if (srb != NULL) {
srb->cmd->result = res;
kref_put(&srb->srb_ref, qla4xxx_srb_compl);
}
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
void qla4xxx_dead_adapter_cleanup(struct scsi_qla_host *ha)
{
clear_bit(AF_ONLINE, &ha->flags);
/* Disable the board */
ql4_printk(KERN_INFO, ha, "Disabling the board\n");
qla4xxx_abort_active_cmds(ha, DID_NO_CONNECT << 16);
qla4xxx_mark_all_devices_missing(ha);
clear_bit(AF_INIT_DONE, &ha->flags);
}
static void qla4xxx_fail_session(struct iscsi_cls_session *cls_session)
{
struct iscsi_session *sess;
struct ddb_entry *ddb_entry;
sess = cls_session->dd_data;
ddb_entry = sess->dd_data;
ddb_entry->fw_ddb_device_state = DDB_DS_SESSION_FAILED;
iscsi_session_failure(cls_session->dd_data, ISCSI_ERR_CONN_FAILED);
}
/**
* qla4xxx_recover_adapter - recovers adapter after a fatal error
* @ha: Pointer to host adapter structure.
**/
static int qla4xxx_recover_adapter(struct scsi_qla_host *ha)
{
int status = QLA_ERROR;
uint8_t reset_chip = 0;
/* Stall incoming I/O until we are done */
scsi_block_requests(ha->host);
clear_bit(AF_ONLINE, &ha->flags);
clear_bit(AF_LINK_UP, &ha->flags);
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: adapter OFFLINE\n", __func__));
set_bit(DPC_RESET_ACTIVE, &ha->dpc_flags);
iscsi_host_for_each_session(ha->host, qla4xxx_fail_session);
if (test_bit(DPC_RESET_HA, &ha->dpc_flags))
reset_chip = 1;
/* For the DPC_RESET_HA_INTR case (ISP-4xxx specific)
* do not reset adapter, jump to initialize_adapter */
if (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) {
status = QLA_SUCCESS;
goto recover_ha_init_adapter;
}
/* For the ISP-82xx adapter, issue a stop_firmware if invoked
* from eh_host_reset or ioctl module */
if (is_qla8022(ha) && !reset_chip &&
test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags)) {
DEBUG2(ql4_printk(KERN_INFO, ha,
"scsi%ld: %s - Performing stop_firmware...\n",
ha->host_no, __func__));
status = ha->isp_ops->reset_firmware(ha);
if (status == QLA_SUCCESS) {
if (!test_bit(AF_FW_RECOVERY, &ha->flags))
qla4xxx_cmd_wait(ha);
ha->isp_ops->disable_intrs(ha);
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
qla4xxx_abort_active_cmds(ha, DID_RESET << 16);
} else {
/* If the stop_firmware fails then
* reset the entire chip */
reset_chip = 1;
clear_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags);
set_bit(DPC_RESET_HA, &ha->dpc_flags);
}
}
/* Issue full chip reset if recovering from a catastrophic error,
* or if stop_firmware fails for ISP-82xx.
* This is the default case for ISP-4xxx */
if (!is_qla8022(ha) || reset_chip) {
if (!test_bit(AF_FW_RECOVERY, &ha->flags))
qla4xxx_cmd_wait(ha);
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
qla4xxx_abort_active_cmds(ha, DID_RESET << 16);
DEBUG2(ql4_printk(KERN_INFO, ha,
"scsi%ld: %s - Performing chip reset..\n",
ha->host_no, __func__));
status = ha->isp_ops->reset_chip(ha);
}
/* Flush any pending ddb changed AENs */
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
recover_ha_init_adapter:
/* Upon successful firmware/chip reset, re-initialize the adapter */
if (status == QLA_SUCCESS) {
/* For ISP-4xxx, force function 1 to always initialize
* before function 3 to prevent both funcions from
* stepping on top of the other */
if (!is_qla8022(ha) && (ha->mac_index == 3))
ssleep(6);
/* NOTE: AF_ONLINE flag set upon successful completion of
* qla4xxx_initialize_adapter */
status = qla4xxx_initialize_adapter(ha);
}
/* Retry failed adapter initialization, if necessary
* Do not retry initialize_adapter for RESET_HA_INTR (ISP-4xxx specific)
* case to prevent ping-pong resets between functions */
if (!test_bit(AF_ONLINE, &ha->flags) &&
!test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) {
/* Adapter initialization failed, see if we can retry
* resetting the ha.
* Since we don't want to block the DPC for too long
* with multiple resets in the same thread,
* utilize DPC to retry */
if (!test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags)) {
ha->retry_reset_ha_cnt = MAX_RESET_HA_RETRIES;
DEBUG2(printk("scsi%ld: recover adapter - retrying "
"(%d) more times\n", ha->host_no,
ha->retry_reset_ha_cnt));
set_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags);
status = QLA_ERROR;
} else {
if (ha->retry_reset_ha_cnt > 0) {
/* Schedule another Reset HA--DPC will retry */
ha->retry_reset_ha_cnt--;
DEBUG2(printk("scsi%ld: recover adapter - "
"retry remaining %d\n",
ha->host_no,
ha->retry_reset_ha_cnt));
status = QLA_ERROR;
}
if (ha->retry_reset_ha_cnt == 0) {
/* Recover adapter retries have been exhausted.
* Adapter DEAD */
DEBUG2(printk("scsi%ld: recover adapter "
"failed - board disabled\n",
ha->host_no));
qla4xxx_dead_adapter_cleanup(ha);
clear_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags);
clear_bit(DPC_RESET_HA, &ha->dpc_flags);
clear_bit(DPC_RESET_HA_FW_CONTEXT,
&ha->dpc_flags);
status = QLA_ERROR;
}
}
} else {
clear_bit(DPC_RESET_HA, &ha->dpc_flags);
clear_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags);
clear_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags);
}
ha->adapter_error_count++;
if (test_bit(AF_ONLINE, &ha->flags))
ha->isp_ops->enable_intrs(ha);
scsi_unblock_requests(ha->host);
clear_bit(DPC_RESET_ACTIVE, &ha->dpc_flags);
DEBUG2(printk("scsi%ld: recover adapter: %s\n", ha->host_no,
status == QLA_ERROR ? "FAILED" : "SUCCEEDED"));
return status;
}
static void qla4xxx_relogin_devices(struct iscsi_cls_session *cls_session)
{
struct iscsi_session *sess;
struct ddb_entry *ddb_entry;
struct scsi_qla_host *ha;
sess = cls_session->dd_data;
ddb_entry = sess->dd_data;
ha = ddb_entry->ha;
if (!iscsi_is_session_online(cls_session)) {
if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) {
ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]"
" unblock session\n", ha->host_no, __func__,
ddb_entry->fw_ddb_index);
iscsi_unblock_session(ddb_entry->sess);
} else {
/* Trigger relogin */
iscsi_session_failure(cls_session->dd_data,
ISCSI_ERR_CONN_FAILED);
}
}
}
static void qla4xxx_relogin_all_devices(struct scsi_qla_host *ha)
{
iscsi_host_for_each_session(ha->host, qla4xxx_relogin_devices);
}
void qla4xxx_wake_dpc(struct scsi_qla_host *ha)
{
if (ha->dpc_thread)
queue_work(ha->dpc_thread, &ha->dpc_work);
}
/**
* qla4xxx_do_dpc - dpc routine
* @data: in our case pointer to adapter structure
*
* This routine is a task that is schedule by the interrupt handler
* to perform the background processing for interrupts. We put it
* on a task queue that is consumed whenever the scheduler runs; that's
* so you can do anything (i.e. put the process to sleep etc). In fact,
* the mid-level tries to sleep when it reaches the driver threshold
* "host->can_queue". This can cause a panic if we were in our interrupt code.
**/
static void qla4xxx_do_dpc(struct work_struct *work)
{
struct scsi_qla_host *ha =
container_of(work, struct scsi_qla_host, dpc_work);
int status = QLA_ERROR;
DEBUG2(printk("scsi%ld: %s: DPC handler waking up."
"flags = 0x%08lx, dpc_flags = 0x%08lx\n",
ha->host_no, __func__, ha->flags, ha->dpc_flags))
/* Initialization not yet finished. Don't do anything yet. */
if (!test_bit(AF_INIT_DONE, &ha->flags))
return;
if (test_bit(AF_EEH_BUSY, &ha->flags)) {
DEBUG2(printk(KERN_INFO "scsi%ld: %s: flags = %lx\n",
ha->host_no, __func__, ha->flags));
return;
}
if (is_qla8022(ha)) {
if (test_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags)) {
qla4_8xxx_idc_lock(ha);
qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
QLA82XX_DEV_FAILED);
qla4_8xxx_idc_unlock(ha);
ql4_printk(KERN_INFO, ha, "HW State: FAILED\n");
qla4_8xxx_device_state_handler(ha);
}
if (test_and_clear_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags)) {
qla4_8xxx_need_qsnt_handler(ha);
}
}
if (!test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags) &&
(test_bit(DPC_RESET_HA, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags))) {
if (ql4xdontresethba) {
DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n",
ha->host_no, __func__));
clear_bit(DPC_RESET_HA, &ha->dpc_flags);
clear_bit(DPC_RESET_HA_INTR, &ha->dpc_flags);
clear_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags);
goto dpc_post_reset_ha;
}
if (test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA, &ha->dpc_flags))
qla4xxx_recover_adapter(ha);
if (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) {
uint8_t wait_time = RESET_INTR_TOV;
while ((readw(&ha->reg->ctrl_status) &
(CSR_SOFT_RESET | CSR_FORCE_SOFT_RESET)) != 0) {
if (--wait_time == 0)
break;
msleep(1000);
}
if (wait_time == 0)
DEBUG2(printk("scsi%ld: %s: SR|FSR "
"bit not cleared-- resetting\n",
ha->host_no, __func__));
qla4xxx_abort_active_cmds(ha, DID_RESET << 16);
if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS) {
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
status = qla4xxx_recover_adapter(ha);
}
clear_bit(DPC_RESET_HA_INTR, &ha->dpc_flags);
if (status == QLA_SUCCESS)
ha->isp_ops->enable_intrs(ha);
}
}
dpc_post_reset_ha:
/* ---- process AEN? --- */
if (test_and_clear_bit(DPC_AEN, &ha->dpc_flags))
qla4xxx_process_aen(ha, PROCESS_ALL_AENS);
/* ---- Get DHCP IP Address? --- */
if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags))
qla4xxx_get_dhcp_ip_address(ha);
/* ---- link change? --- */
if (test_and_clear_bit(DPC_LINK_CHANGED, &ha->dpc_flags)) {
if (!test_bit(AF_LINK_UP, &ha->flags)) {
/* ---- link down? --- */
qla4xxx_mark_all_devices_missing(ha);
} else {
/* ---- link up? --- *
* F/W will auto login to all devices ONLY ONCE after
* link up during driver initialization and runtime
* fatal error recovery. Therefore, the driver must
* manually relogin to devices when recovering from
* connection failures, logouts, expired KATO, etc. */
qla4xxx_relogin_all_devices(ha);
}
}
}
/**
* qla4xxx_free_adapter - release the adapter
* @ha: pointer to adapter structure
**/
static void qla4xxx_free_adapter(struct scsi_qla_host *ha)
{
if (test_bit(AF_INTERRUPTS_ON, &ha->flags)) {
/* Turn-off interrupts on the card. */
ha->isp_ops->disable_intrs(ha);
}
/* Remove timer thread, if present */
if (ha->timer_active)
qla4xxx_stop_timer(ha);
/* Kill the kernel thread for this host */
if (ha->dpc_thread)
destroy_workqueue(ha->dpc_thread);
/* Kill the kernel thread for this host */
if (ha->task_wq)
destroy_workqueue(ha->task_wq);
/* Put firmware in known state */
ha->isp_ops->reset_firmware(ha);
if (is_qla8022(ha)) {
qla4_8xxx_idc_lock(ha);
qla4_8xxx_clear_drv_active(ha);
qla4_8xxx_idc_unlock(ha);
}
/* Detach interrupts */
if (test_and_clear_bit(AF_IRQ_ATTACHED, &ha->flags))
qla4xxx_free_irqs(ha);
/* free extra memory */
qla4xxx_mem_free(ha);
}
int qla4_8xxx_iospace_config(struct scsi_qla_host *ha)
{
int status = 0;
uint8_t revision_id;
unsigned long mem_base, mem_len, db_base, db_len;
struct pci_dev *pdev = ha->pdev;
status = pci_request_regions(pdev, DRIVER_NAME);
if (status) {
printk(KERN_WARNING
"scsi(%ld) Failed to reserve PIO regions (%s) "
"status=%d\n", ha->host_no, pci_name(pdev), status);
goto iospace_error_exit;
}
pci_read_config_byte(pdev, PCI_REVISION_ID, &revision_id);
DEBUG2(printk(KERN_INFO "%s: revision-id=%d\n",
__func__, revision_id));
ha->revision_id = revision_id;
/* remap phys address */
mem_base = pci_resource_start(pdev, 0); /* 0 is for BAR 0 */
mem_len = pci_resource_len(pdev, 0);
DEBUG2(printk(KERN_INFO "%s: ioremap from %lx a size of %lx\n",
__func__, mem_base, mem_len));
/* mapping of pcibase pointer */
ha->nx_pcibase = (unsigned long)ioremap(mem_base, mem_len);
if (!ha->nx_pcibase) {
printk(KERN_ERR
"cannot remap MMIO (%s), aborting\n", pci_name(pdev));
pci_release_regions(ha->pdev);
goto iospace_error_exit;
}
/* Mapping of IO base pointer, door bell read and write pointer */
/* mapping of IO base pointer */
ha->qla4_8xxx_reg =
(struct device_reg_82xx __iomem *)((uint8_t *)ha->nx_pcibase +
0xbc000 + (ha->pdev->devfn << 11));
db_base = pci_resource_start(pdev, 4); /* doorbell is on bar 4 */
db_len = pci_resource_len(pdev, 4);
ha->nx_db_wr_ptr = (ha->pdev->devfn == 4 ? QLA82XX_CAM_RAM_DB1 :
QLA82XX_CAM_RAM_DB2);
return 0;
iospace_error_exit:
return -ENOMEM;
}
/***
* qla4xxx_iospace_config - maps registers
* @ha: pointer to adapter structure
*
* This routines maps HBA's registers from the pci address space
* into the kernel virtual address space for memory mapped i/o.
**/
int qla4xxx_iospace_config(struct scsi_qla_host *ha)
{
unsigned long pio, pio_len, pio_flags;
unsigned long mmio, mmio_len, mmio_flags;
pio = pci_resource_start(ha->pdev, 0);
pio_len = pci_resource_len(ha->pdev, 0);
pio_flags = pci_resource_flags(ha->pdev, 0);
if (pio_flags & IORESOURCE_IO) {
if (pio_len < MIN_IOBASE_LEN) {
ql4_printk(KERN_WARNING, ha,
"Invalid PCI I/O region size\n");
pio = 0;
}
} else {
ql4_printk(KERN_WARNING, ha, "region #0 not a PIO resource\n");
pio = 0;
}
/* Use MMIO operations for all accesses. */
mmio = pci_resource_start(ha->pdev, 1);
mmio_len = pci_resource_len(ha->pdev, 1);
mmio_flags = pci_resource_flags(ha->pdev, 1);
if (!(mmio_flags & IORESOURCE_MEM)) {
ql4_printk(KERN_ERR, ha,
"region #0 not an MMIO resource, aborting\n");
goto iospace_error_exit;
}
if (mmio_len < MIN_IOBASE_LEN) {
ql4_printk(KERN_ERR, ha,
"Invalid PCI mem region size, aborting\n");
goto iospace_error_exit;
}
if (pci_request_regions(ha->pdev, DRIVER_NAME)) {
ql4_printk(KERN_WARNING, ha,
"Failed to reserve PIO/MMIO regions\n");
goto iospace_error_exit;
}
ha->pio_address = pio;
ha->pio_length = pio_len;
ha->reg = ioremap(mmio, MIN_IOBASE_LEN);
if (!ha->reg) {
ql4_printk(KERN_ERR, ha,
"cannot remap MMIO, aborting\n");
goto iospace_error_exit;
}
return 0;
iospace_error_exit:
return -ENOMEM;
}
static struct isp_operations qla4xxx_isp_ops = {
.iospace_config = qla4xxx_iospace_config,
.pci_config = qla4xxx_pci_config,
.disable_intrs = qla4xxx_disable_intrs,
.enable_intrs = qla4xxx_enable_intrs,
.start_firmware = qla4xxx_start_firmware,
.intr_handler = qla4xxx_intr_handler,
.interrupt_service_routine = qla4xxx_interrupt_service_routine,
.reset_chip = qla4xxx_soft_reset,
.reset_firmware = qla4xxx_hw_reset,
.queue_iocb = qla4xxx_queue_iocb,
.complete_iocb = qla4xxx_complete_iocb,
.rd_shdw_req_q_out = qla4xxx_rd_shdw_req_q_out,
.rd_shdw_rsp_q_in = qla4xxx_rd_shdw_rsp_q_in,
.get_sys_info = qla4xxx_get_sys_info,
};
static struct isp_operations qla4_8xxx_isp_ops = {
.iospace_config = qla4_8xxx_iospace_config,
.pci_config = qla4_8xxx_pci_config,
.disable_intrs = qla4_8xxx_disable_intrs,
.enable_intrs = qla4_8xxx_enable_intrs,
.start_firmware = qla4_8xxx_load_risc,
.intr_handler = qla4_8xxx_intr_handler,
.interrupt_service_routine = qla4_8xxx_interrupt_service_routine,
.reset_chip = qla4_8xxx_isp_reset,
.reset_firmware = qla4_8xxx_stop_firmware,
.queue_iocb = qla4_8xxx_queue_iocb,
.complete_iocb = qla4_8xxx_complete_iocb,
.rd_shdw_req_q_out = qla4_8xxx_rd_shdw_req_q_out,
.rd_shdw_rsp_q_in = qla4_8xxx_rd_shdw_rsp_q_in,
.get_sys_info = qla4_8xxx_get_sys_info,
};
uint16_t qla4xxx_rd_shdw_req_q_out(struct scsi_qla_host *ha)
{
return (uint16_t)le32_to_cpu(ha->shadow_regs->req_q_out);
}
uint16_t qla4_8xxx_rd_shdw_req_q_out(struct scsi_qla_host *ha)
{
return (uint16_t)le32_to_cpu(readl(&ha->qla4_8xxx_reg->req_q_out));
}
uint16_t qla4xxx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha)
{
return (uint16_t)le32_to_cpu(ha->shadow_regs->rsp_q_in);
}
uint16_t qla4_8xxx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha)
{
return (uint16_t)le32_to_cpu(readl(&ha->qla4_8xxx_reg->rsp_q_in));
}
static ssize_t qla4xxx_show_boot_eth_info(void *data, int type, char *buf)
{
struct scsi_qla_host *ha = data;
char *str = buf;
int rc;
switch (type) {
case ISCSI_BOOT_ETH_FLAGS:
rc = sprintf(str, "%d\n", SYSFS_FLAG_FW_SEL_BOOT);
break;
case ISCSI_BOOT_ETH_INDEX:
rc = sprintf(str, "0\n");
break;
case ISCSI_BOOT_ETH_MAC:
rc = sysfs_format_mac(str, ha->my_mac,
MAC_ADDR_LEN);
break;
default:
rc = -ENOSYS;
break;
}
return rc;
}
static mode_t qla4xxx_eth_get_attr_visibility(void *data, int type)
{
int rc;
switch (type) {
case ISCSI_BOOT_ETH_FLAGS:
case ISCSI_BOOT_ETH_MAC:
case ISCSI_BOOT_ETH_INDEX:
rc = S_IRUGO;
break;
default:
rc = 0;
break;
}
return rc;
}
static ssize_t qla4xxx_show_boot_ini_info(void *data, int type, char *buf)
{
struct scsi_qla_host *ha = data;
char *str = buf;
int rc;
switch (type) {
case ISCSI_BOOT_INI_INITIATOR_NAME:
rc = sprintf(str, "%s\n", ha->name_string);
break;
default:
rc = -ENOSYS;
break;
}
return rc;
}
static mode_t qla4xxx_ini_get_attr_visibility(void *data, int type)
{
int rc;
switch (type) {
case ISCSI_BOOT_INI_INITIATOR_NAME:
rc = S_IRUGO;
break;
default:
rc = 0;
break;
}
return rc;
}
static ssize_t
qla4xxx_show_boot_tgt_info(struct ql4_boot_session_info *boot_sess, int type,
char *buf)
{
struct ql4_conn_info *boot_conn = &boot_sess->conn_list[0];
char *str = buf;
int rc;
switch (type) {
case ISCSI_BOOT_TGT_NAME:
rc = sprintf(buf, "%s\n", (char *)&boot_sess->target_name);
break;
case ISCSI_BOOT_TGT_IP_ADDR:
if (boot_sess->conn_list[0].dest_ipaddr.ip_type == 0x1)
rc = sprintf(buf, "%pI4\n",
&boot_conn->dest_ipaddr.ip_address);
else
rc = sprintf(str, "%pI6\n",
&boot_conn->dest_ipaddr.ip_address);
break;
case ISCSI_BOOT_TGT_PORT:
rc = sprintf(str, "%d\n", boot_conn->dest_port);
break;
case ISCSI_BOOT_TGT_CHAP_NAME:
rc = sprintf(str, "%.*s\n",
boot_conn->chap.target_chap_name_length,
(char *)&boot_conn->chap.target_chap_name);
break;
case ISCSI_BOOT_TGT_CHAP_SECRET:
rc = sprintf(str, "%.*s\n",
boot_conn->chap.target_secret_length,
(char *)&boot_conn->chap.target_secret);
break;
case ISCSI_BOOT_TGT_REV_CHAP_NAME:
rc = sprintf(str, "%.*s\n",
boot_conn->chap.intr_chap_name_length,
(char *)&boot_conn->chap.intr_chap_name);
break;
case ISCSI_BOOT_TGT_REV_CHAP_SECRET:
rc = sprintf(str, "%.*s\n",
boot_conn->chap.intr_secret_length,
(char *)&boot_conn->chap.intr_secret);
break;
case ISCSI_BOOT_TGT_FLAGS:
rc = sprintf(str, "%d\n", SYSFS_FLAG_FW_SEL_BOOT);
break;
case ISCSI_BOOT_TGT_NIC_ASSOC:
rc = sprintf(str, "0\n");
break;
default:
rc = -ENOSYS;
break;
}
return rc;
}
static ssize_t qla4xxx_show_boot_tgt_pri_info(void *data, int type, char *buf)
{
struct scsi_qla_host *ha = data;
struct ql4_boot_session_info *boot_sess = &(ha->boot_tgt.boot_pri_sess);
return qla4xxx_show_boot_tgt_info(boot_sess, type, buf);
}
static ssize_t qla4xxx_show_boot_tgt_sec_info(void *data, int type, char *buf)
{
struct scsi_qla_host *ha = data;
struct ql4_boot_session_info *boot_sess = &(ha->boot_tgt.boot_sec_sess);
return qla4xxx_show_boot_tgt_info(boot_sess, type, buf);
}
static mode_t qla4xxx_tgt_get_attr_visibility(void *data, int type)
{
int rc;
switch (type) {
case ISCSI_BOOT_TGT_NAME:
case ISCSI_BOOT_TGT_IP_ADDR:
case ISCSI_BOOT_TGT_PORT:
case ISCSI_BOOT_TGT_CHAP_NAME:
case ISCSI_BOOT_TGT_CHAP_SECRET:
case ISCSI_BOOT_TGT_REV_CHAP_NAME:
case ISCSI_BOOT_TGT_REV_CHAP_SECRET:
case ISCSI_BOOT_TGT_NIC_ASSOC:
case ISCSI_BOOT_TGT_FLAGS:
rc = S_IRUGO;
break;
default:
rc = 0;
break;
}
return rc;
}
static void qla4xxx_boot_release(void *data)
{
struct scsi_qla_host *ha = data;
scsi_host_put(ha->host);
}
static int get_fw_boot_info(struct scsi_qla_host *ha, uint16_t ddb_index[])
{
dma_addr_t buf_dma;
uint32_t addr, pri_addr, sec_addr;
uint32_t offset;
uint16_t func_num;
uint8_t val;
uint8_t *buf = NULL;
size_t size = 13 * sizeof(uint8_t);
int ret = QLA_SUCCESS;
func_num = PCI_FUNC(ha->pdev->devfn);
DEBUG2(ql4_printk(KERN_INFO, ha,
"%s: Get FW boot info for 0x%x func %d\n", __func__,
(is_qla4032(ha) ? PCI_DEVICE_ID_QLOGIC_ISP4032 :
PCI_DEVICE_ID_QLOGIC_ISP8022), func_num));
if (is_qla4032(ha)) {
if (func_num == 1) {
addr = NVRAM_PORT0_BOOT_MODE;
pri_addr = NVRAM_PORT0_BOOT_PRI_TGT;
sec_addr = NVRAM_PORT0_BOOT_SEC_TGT;
} else if (func_num == 3) {
addr = NVRAM_PORT1_BOOT_MODE;
pri_addr = NVRAM_PORT1_BOOT_PRI_TGT;
sec_addr = NVRAM_PORT1_BOOT_SEC_TGT;
} else {
ret = QLA_ERROR;
goto exit_boot_info;
}
/* Check Boot Mode */
val = rd_nvram_byte(ha, addr);
if (!(val & 0x07)) {
DEBUG2(ql4_printk(KERN_ERR, ha,
"%s: Failed Boot options : 0x%x\n",
__func__, val));
ret = QLA_ERROR;
goto exit_boot_info;
}
/* get primary valid target index */
val = rd_nvram_byte(ha, pri_addr);
if (val & BIT_7)
ddb_index[0] = (val & 0x7f);
else
ddb_index[0] = 0;
/* get secondary valid target index */
val = rd_nvram_byte(ha, sec_addr);
if (val & BIT_7)
ddb_index[1] = (val & 0x7f);
else
ddb_index[1] = 1;
} else if (is_qla8022(ha)) {
buf = dma_alloc_coherent(&ha->pdev->dev, size,
&buf_dma, GFP_KERNEL);
if (!buf) {
DEBUG2(ql4_printk(KERN_ERR, ha,
"%s: Unable to allocate dma buffer\n",
__func__));
ret = QLA_ERROR;
goto exit_boot_info;
}
if (ha->port_num == 0)
offset = BOOT_PARAM_OFFSET_PORT0;
else if (ha->port_num == 1)
offset = BOOT_PARAM_OFFSET_PORT1;
else {
ret = QLA_ERROR;
goto exit_boot_info_free;
}
addr = FLASH_RAW_ACCESS_ADDR + (ha->hw.flt_iscsi_param * 4) +
offset;
if (qla4xxx_get_flash(ha, buf_dma, addr,
13 * sizeof(uint8_t)) != QLA_SUCCESS) {
DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: Get Flash"
"failed\n", ha->host_no, __func__));
ret = QLA_ERROR;
goto exit_boot_info_free;
}
/* Check Boot Mode */
if (!(buf[1] & 0x07)) {
DEBUG2(ql4_printk(KERN_INFO, ha,
"Failed: Boot options : 0x%x\n",
buf[1]));
ret = QLA_ERROR;
goto exit_boot_info_free;
}
/* get primary valid target index */
if (buf[2] & BIT_7)
ddb_index[0] = buf[2] & 0x7f;
else
ddb_index[0] = 0;
/* get secondary valid target index */
if (buf[11] & BIT_7)
ddb_index[1] = buf[11] & 0x7f;
else
ddb_index[1] = 1;
} else {
ret = QLA_ERROR;
goto exit_boot_info;
}
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Primary target ID %d, Secondary"
" target ID %d\n", __func__, ddb_index[0],
ddb_index[1]));
exit_boot_info_free:
dma_free_coherent(&ha->pdev->dev, size, buf, buf_dma);
exit_boot_info:
return ret;
}
static int qla4xxx_get_boot_target(struct scsi_qla_host *ha,
struct ql4_boot_session_info *boot_sess,
uint16_t ddb_index)
{
struct ql4_conn_info *boot_conn = &boot_sess->conn_list[0];
struct dev_db_entry *fw_ddb_entry;
dma_addr_t fw_ddb_entry_dma;
uint16_t idx;
uint16_t options;
int ret = QLA_SUCCESS;
fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
&fw_ddb_entry_dma, GFP_KERNEL);
if (!fw_ddb_entry) {
DEBUG2(ql4_printk(KERN_ERR, ha,
"%s: Unable to allocate dma buffer.\n",
__func__));
ret = QLA_ERROR;
return ret;
}
if (qla4xxx_bootdb_by_index(ha, fw_ddb_entry,
fw_ddb_entry_dma, ddb_index)) {
DEBUG2(ql4_printk(KERN_ERR, ha,
"%s: Flash DDB read Failed\n", __func__));
ret = QLA_ERROR;
goto exit_boot_target;
}
/* Update target name and IP from DDB */
memcpy(boot_sess->target_name, fw_ddb_entry->iscsi_name,
min(sizeof(boot_sess->target_name),
sizeof(fw_ddb_entry->iscsi_name)));
options = le16_to_cpu(fw_ddb_entry->options);
if (options & DDB_OPT_IPV6_DEVICE) {
memcpy(&boot_conn->dest_ipaddr.ip_address,
&fw_ddb_entry->ip_addr[0], IPv6_ADDR_LEN);
} else {
boot_conn->dest_ipaddr.ip_type = 0x1;
memcpy(&boot_conn->dest_ipaddr.ip_address,
&fw_ddb_entry->ip_addr[0], IP_ADDR_LEN);
}
boot_conn->dest_port = le16_to_cpu(fw_ddb_entry->port);
/* update chap information */
idx = __le16_to_cpu(fw_ddb_entry->chap_tbl_idx);
if (BIT_7 & le16_to_cpu(fw_ddb_entry->iscsi_options)) {
DEBUG2(ql4_printk(KERN_INFO, ha, "Setting chap\n"));
ret = qla4xxx_get_chap(ha, (char *)&boot_conn->chap.
target_chap_name,
(char *)&boot_conn->chap.target_secret,
idx);
if (ret) {
ql4_printk(KERN_ERR, ha, "Failed to set chap\n");
ret = QLA_ERROR;
goto exit_boot_target;
}
boot_conn->chap.target_chap_name_length = QL4_CHAP_MAX_NAME_LEN;
boot_conn->chap.target_secret_length = QL4_CHAP_MAX_SECRET_LEN;
}
if (BIT_4 & le16_to_cpu(fw_ddb_entry->iscsi_options)) {
DEBUG2(ql4_printk(KERN_INFO, ha, "Setting BIDI chap\n"));
ret = qla4xxx_get_chap(ha, (char *)&boot_conn->chap.
intr_chap_name,
(char *)&boot_conn->chap.intr_secret,
(idx + 1));
if (ret) {
ql4_printk(KERN_ERR, ha, "Failed to set BIDI chap\n");
ret = QLA_ERROR;
goto exit_boot_target;
}
boot_conn->chap.intr_chap_name_length = QL4_CHAP_MAX_NAME_LEN;
boot_conn->chap.intr_secret_length = QL4_CHAP_MAX_SECRET_LEN;
}
exit_boot_target:
dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
fw_ddb_entry, fw_ddb_entry_dma);
return ret;
}
static int qla4xxx_get_boot_info(struct scsi_qla_host *ha)
{
uint16_t ddb_index[2];
int ret = QLA_SUCCESS;
memset(ddb_index, 0, sizeof(ddb_index));
ret = get_fw_boot_info(ha, ddb_index);
if (ret != QLA_SUCCESS) {
DEBUG2(ql4_printk(KERN_ERR, ha,
"%s: Failed to set boot info.\n", __func__));
return ret;
}
ret = qla4xxx_get_boot_target(ha, &(ha->boot_tgt.boot_pri_sess),
ddb_index[0]);
if (ret != QLA_SUCCESS) {
DEBUG2(ql4_printk(KERN_ERR, ha, "%s: Failed to get "
"primary target\n", __func__));
}
ret = qla4xxx_get_boot_target(ha, &(ha->boot_tgt.boot_sec_sess),
ddb_index[1]);
if (ret != QLA_SUCCESS) {
DEBUG2(ql4_printk(KERN_ERR, ha, "%s: Failed to get "
"secondary target\n", __func__));
}
return ret;
}
static int qla4xxx_setup_boot_info(struct scsi_qla_host *ha)
{
struct iscsi_boot_kobj *boot_kobj;
if (qla4xxx_get_boot_info(ha) != QLA_SUCCESS)
return 0;
ha->boot_kset = iscsi_boot_create_host_kset(ha->host->host_no);
if (!ha->boot_kset)
goto kset_free;
if (!scsi_host_get(ha->host))
goto kset_free;
boot_kobj = iscsi_boot_create_target(ha->boot_kset, 0, ha,
qla4xxx_show_boot_tgt_pri_info,
qla4xxx_tgt_get_attr_visibility,
qla4xxx_boot_release);
if (!boot_kobj)
goto put_host;
if (!scsi_host_get(ha->host))
goto kset_free;
boot_kobj = iscsi_boot_create_target(ha->boot_kset, 1, ha,
qla4xxx_show_boot_tgt_sec_info,
qla4xxx_tgt_get_attr_visibility,
qla4xxx_boot_release);
if (!boot_kobj)
goto put_host;
if (!scsi_host_get(ha->host))
goto kset_free;
boot_kobj = iscsi_boot_create_initiator(ha->boot_kset, 0, ha,
qla4xxx_show_boot_ini_info,
qla4xxx_ini_get_attr_visibility,
qla4xxx_boot_release);
if (!boot_kobj)
goto put_host;
if (!scsi_host_get(ha->host))
goto kset_free;
boot_kobj = iscsi_boot_create_ethernet(ha->boot_kset, 0, ha,
qla4xxx_show_boot_eth_info,
qla4xxx_eth_get_attr_visibility,
qla4xxx_boot_release);
if (!boot_kobj)
goto put_host;
return 0;
put_host:
scsi_host_put(ha->host);
kset_free:
iscsi_boot_destroy_kset(ha->boot_kset);
return -ENOMEM;
}
/**
* qla4xxx_probe_adapter - callback function to probe HBA
* @pdev: pointer to pci_dev structure
* @pci_device_id: pointer to pci_device entry
*
* This routine will probe for Qlogic 4xxx iSCSI host adapters.
* It returns zero if successful. It also initializes all data necessary for
* the driver.
**/
static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
int ret = -ENODEV, status;
struct Scsi_Host *host;
struct scsi_qla_host *ha;
uint8_t init_retry_count = 0;
char buf[34];
struct qla4_8xxx_legacy_intr_set *nx_legacy_intr;
uint32_t dev_state;
if (pci_enable_device(pdev))
return -1;
host = iscsi_host_alloc(&qla4xxx_driver_template, sizeof(*ha), 0);
if (host == NULL) {
printk(KERN_WARNING
"qla4xxx: Couldn't allocate host from scsi layer!\n");
goto probe_disable_device;
}
/* Clear our data area */
ha = to_qla_host(host);
memset(ha, 0, sizeof(*ha));
/* Save the information from PCI BIOS. */
ha->pdev = pdev;
ha->host = host;
ha->host_no = host->host_no;
pci_enable_pcie_error_reporting(pdev);
/* Setup Runtime configurable options */
if (is_qla8022(ha)) {
ha->isp_ops = &qla4_8xxx_isp_ops;
rwlock_init(&ha->hw_lock);
ha->qdr_sn_window = -1;
ha->ddr_mn_window = -1;
ha->curr_window = 255;
ha->func_num = PCI_FUNC(ha->pdev->devfn);
nx_legacy_intr = &legacy_intr[ha->func_num];
ha->nx_legacy_intr.int_vec_bit = nx_legacy_intr->int_vec_bit;
ha->nx_legacy_intr.tgt_status_reg =
nx_legacy_intr->tgt_status_reg;
ha->nx_legacy_intr.tgt_mask_reg = nx_legacy_intr->tgt_mask_reg;
ha->nx_legacy_intr.pci_int_reg = nx_legacy_intr->pci_int_reg;
} else {
ha->isp_ops = &qla4xxx_isp_ops;
}
/* Set EEH reset type to fundamental if required by hba */
if (is_qla8022(ha))
pdev->needs_freset = 1;
/* Configure PCI I/O space. */
ret = ha->isp_ops->iospace_config(ha);
if (ret)
goto probe_failed_ioconfig;
ql4_printk(KERN_INFO, ha, "Found an ISP%04x, irq %d, iobase 0x%p\n",
pdev->device, pdev->irq, ha->reg);
qla4xxx_config_dma_addressing(ha);
/* Initialize lists and spinlocks. */
INIT_LIST_HEAD(&ha->free_srb_q);
mutex_init(&ha->mbox_sem);
init_completion(&ha->mbx_intr_comp);
spin_lock_init(&ha->hardware_lock);
/* Allocate dma buffers */
if (qla4xxx_mem_alloc(ha)) {
ql4_printk(KERN_WARNING, ha,
"[ERROR] Failed to allocate memory for adapter\n");
ret = -ENOMEM;
goto probe_failed;
}
host->cmd_per_lun = 3;
host->max_channel = 0;
host->max_lun = MAX_LUNS - 1;
host->max_id = MAX_TARGETS;
host->max_cmd_len = IOCB_MAX_CDB_LEN;
host->can_queue = MAX_SRBS ;
host->transportt = qla4xxx_scsi_transport;
ret = scsi_init_shared_tag_map(host, MAX_SRBS);
if (ret) {
ql4_printk(KERN_WARNING, ha,
"%s: scsi_init_shared_tag_map failed\n", __func__);
goto probe_failed;
}
pci_set_drvdata(pdev, ha);
ret = scsi_add_host(host, &pdev->dev);
if (ret)
goto probe_failed;
if (is_qla8022(ha))
(void) qla4_8xxx_get_flash_info(ha);
/*
* Initialize the Host adapter request/response queues and
* firmware
* NOTE: interrupts enabled upon successful completion
*/
status = qla4xxx_initialize_adapter(ha);
while ((!test_bit(AF_ONLINE, &ha->flags)) &&
init_retry_count++ < MAX_INIT_RETRIES) {
if (is_qla8022(ha)) {
qla4_8xxx_idc_lock(ha);
dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
qla4_8xxx_idc_unlock(ha);
if (dev_state == QLA82XX_DEV_FAILED) {
ql4_printk(KERN_WARNING, ha, "%s: don't retry "
"initialize adapter. H/W is in failed state\n",
__func__);
break;
}
}
DEBUG2(printk("scsi: %s: retrying adapter initialization "
"(%d)\n", __func__, init_retry_count));
if (ha->isp_ops->reset_chip(ha) == QLA_ERROR)
continue;
status = qla4xxx_initialize_adapter(ha);
}
if (!test_bit(AF_ONLINE, &ha->flags)) {
ql4_printk(KERN_WARNING, ha, "Failed to initialize adapter\n");
if (is_qla8022(ha) && ql4xdontresethba) {
/* Put the device in failed state. */
DEBUG2(printk(KERN_ERR "HW STATE: FAILED\n"));
qla4_8xxx_idc_lock(ha);
qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
QLA82XX_DEV_FAILED);
qla4_8xxx_idc_unlock(ha);
}
ret = -ENODEV;
goto remove_host;
}
/* Startup the kernel thread for this host adapter. */
DEBUG2(printk("scsi: %s: Starting kernel thread for "
"qla4xxx_dpc\n", __func__));
sprintf(buf, "qla4xxx_%lu_dpc", ha->host_no);
ha->dpc_thread = create_singlethread_workqueue(buf);
if (!ha->dpc_thread) {
ql4_printk(KERN_WARNING, ha, "Unable to start DPC thread!\n");
ret = -ENODEV;
goto remove_host;
}
INIT_WORK(&ha->dpc_work, qla4xxx_do_dpc);
sprintf(buf, "qla4xxx_%lu_task", ha->host_no);
ha->task_wq = alloc_workqueue(buf, WQ_MEM_RECLAIM, 1);
if (!ha->task_wq) {
ql4_printk(KERN_WARNING, ha, "Unable to start task thread!\n");
ret = -ENODEV;
goto remove_host;
}
/* For ISP-82XX, request_irqs is called in qla4_8xxx_load_risc
* (which is called indirectly by qla4xxx_initialize_adapter),
* so that irqs will be registered after crbinit but before
* mbx_intr_enable.
*/
if (!is_qla8022(ha)) {
ret = qla4xxx_request_irqs(ha);
if (ret) {
ql4_printk(KERN_WARNING, ha, "Failed to reserve "
"interrupt %d already in use.\n", pdev->irq);
goto remove_host;
}
}
pci_save_state(ha->pdev);
ha->isp_ops->enable_intrs(ha);
/* Start timer thread. */
qla4xxx_start_timer(ha, qla4xxx_timer, 1);
set_bit(AF_INIT_DONE, &ha->flags);
printk(KERN_INFO
" QLogic iSCSI HBA Driver version: %s\n"
" QLogic ISP%04x @ %s, host#=%ld, fw=%02d.%02d.%02d.%02d\n",
qla4xxx_version_str, ha->pdev->device, pci_name(ha->pdev),
ha->host_no, ha->firmware_version[0], ha->firmware_version[1],
ha->patch_number, ha->build_number);
if (qla4xxx_setup_boot_info(ha))
ql4_printk(KERN_ERR, ha, "%s:ISCSI boot info setup failed\n",
__func__);
qla4xxx_create_ifaces(ha);
return 0;
remove_host:
scsi_remove_host(ha->host);
probe_failed:
qla4xxx_free_adapter(ha);
probe_failed_ioconfig:
pci_disable_pcie_error_reporting(pdev);
scsi_host_put(ha->host);
probe_disable_device:
pci_disable_device(pdev);
return ret;
}
/**
* qla4xxx_prevent_other_port_reinit - prevent other port from re-initialize
* @ha: pointer to adapter structure
*
* Mark the other ISP-4xxx port to indicate that the driver is being removed,
* so that the other port will not re-initialize while in the process of
* removing the ha due to driver unload or hba hotplug.
**/
static void qla4xxx_prevent_other_port_reinit(struct scsi_qla_host *ha)
{
struct scsi_qla_host *other_ha = NULL;
struct pci_dev *other_pdev = NULL;
int fn = ISP4XXX_PCI_FN_2;
/*iscsi function numbers for ISP4xxx is 1 and 3*/
if (PCI_FUNC(ha->pdev->devfn) & BIT_1)
fn = ISP4XXX_PCI_FN_1;
other_pdev =
pci_get_domain_bus_and_slot(pci_domain_nr(ha->pdev->bus),
ha->pdev->bus->number, PCI_DEVFN(PCI_SLOT(ha->pdev->devfn),
fn));
/* Get other_ha if other_pdev is valid and state is enable*/
if (other_pdev) {
if (atomic_read(&other_pdev->enable_cnt)) {
other_ha = pci_get_drvdata(other_pdev);
if (other_ha) {
set_bit(AF_HA_REMOVAL, &other_ha->flags);
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: "
"Prevent %s reinit\n", __func__,
dev_name(&other_ha->pdev->dev)));
}
}
pci_dev_put(other_pdev);
}
}
/**
* qla4xxx_remove_adapter - calback function to remove adapter.
* @pci_dev: PCI device pointer
**/
static void __devexit qla4xxx_remove_adapter(struct pci_dev *pdev)
{
struct scsi_qla_host *ha;
ha = pci_get_drvdata(pdev);
if (!is_qla8022(ha))
qla4xxx_prevent_other_port_reinit(ha);
/* destroy iface from sysfs */
qla4xxx_destroy_ifaces(ha);
if (ha->boot_kset)
iscsi_boot_destroy_kset(ha->boot_kset);
scsi_remove_host(ha->host);
qla4xxx_free_adapter(ha);
scsi_host_put(ha->host);
pci_disable_pcie_error_reporting(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
}
/**
* qla4xxx_config_dma_addressing() - Configure OS DMA addressing method.
* @ha: HA context
*
* At exit, the @ha's flags.enable_64bit_addressing set to indicated
* supported addressing method.
*/
static void qla4xxx_config_dma_addressing(struct scsi_qla_host *ha)
{
int retval;
/* Update our PCI device dma_mask for full 64 bit mask */
if (pci_set_dma_mask(ha->pdev, DMA_BIT_MASK(64)) == 0) {
if (pci_set_consistent_dma_mask(ha->pdev, DMA_BIT_MASK(64))) {
dev_dbg(&ha->pdev->dev,
"Failed to set 64 bit PCI consistent mask; "
"using 32 bit.\n");
retval = pci_set_consistent_dma_mask(ha->pdev,
DMA_BIT_MASK(32));
}
} else
retval = pci_set_dma_mask(ha->pdev, DMA_BIT_MASK(32));
}
static int qla4xxx_slave_alloc(struct scsi_device *sdev)
{
struct iscsi_cls_session *cls_sess;
struct iscsi_session *sess;
struct ddb_entry *ddb;
int queue_depth = QL4_DEF_QDEPTH;
cls_sess = starget_to_session(sdev->sdev_target);
sess = cls_sess->dd_data;
ddb = sess->dd_data;
sdev->hostdata = ddb;
sdev->tagged_supported = 1;
if (ql4xmaxqdepth != 0 && ql4xmaxqdepth <= 0xffffU)
queue_depth = ql4xmaxqdepth;
scsi_activate_tcq(sdev, queue_depth);
return 0;
}
static int qla4xxx_slave_configure(struct scsi_device *sdev)
{
sdev->tagged_supported = 1;
return 0;
}
static void qla4xxx_slave_destroy(struct scsi_device *sdev)
{
scsi_deactivate_tcq(sdev, 1);
}
/**
* qla4xxx_del_from_active_array - returns an active srb
* @ha: Pointer to host adapter structure.
* @index: index into the active_array
*
* This routine removes and returns the srb at the specified index
**/
struct srb *qla4xxx_del_from_active_array(struct scsi_qla_host *ha,
uint32_t index)
{
struct srb *srb = NULL;
struct scsi_cmnd *cmd = NULL;
cmd = scsi_host_find_tag(ha->host, index);
if (!cmd)
return srb;
srb = (struct srb *)CMD_SP(cmd);
if (!srb)
return srb;
/* update counters */
if (srb->flags & SRB_DMA_VALID) {
ha->req_q_count += srb->iocb_cnt;
ha->iocb_cnt -= srb->iocb_cnt;
if (srb->cmd)
srb->cmd->host_scribble =
(unsigned char *)(unsigned long) MAX_SRBS;
}
return srb;
}
/**
* qla4xxx_eh_wait_on_command - waits for command to be returned by firmware
* @ha: Pointer to host adapter structure.
* @cmd: Scsi Command to wait on.
*
* This routine waits for the command to be returned by the Firmware
* for some max time.
**/
static int qla4xxx_eh_wait_on_command(struct scsi_qla_host *ha,
struct scsi_cmnd *cmd)
{
int done = 0;
struct srb *rp;
uint32_t max_wait_time = EH_WAIT_CMD_TOV;
int ret = SUCCESS;
/* Dont wait on command if PCI error is being handled
* by PCI AER driver
*/
if (unlikely(pci_channel_offline(ha->pdev)) ||
(test_bit(AF_EEH_BUSY, &ha->flags))) {
ql4_printk(KERN_WARNING, ha, "scsi%ld: Return from %s\n",
ha->host_no, __func__);
return ret;
}
do {
/* Checking to see if its returned to OS */
rp = (struct srb *) CMD_SP(cmd);
if (rp == NULL) {
done++;
break;
}
msleep(2000);
} while (max_wait_time--);
return done;
}
/**
* qla4xxx_wait_for_hba_online - waits for HBA to come online
* @ha: Pointer to host adapter structure
**/
static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha)
{
unsigned long wait_online;
wait_online = jiffies + (HBA_ONLINE_TOV * HZ);
while (time_before(jiffies, wait_online)) {
if (adapter_up(ha))
return QLA_SUCCESS;
msleep(2000);
}
return QLA_ERROR;
}
/**
* qla4xxx_eh_wait_for_commands - wait for active cmds to finish.
* @ha: pointer to HBA
* @t: target id
* @l: lun id
*
* This function waits for all outstanding commands to a lun to complete. It
* returns 0 if all pending commands are returned and 1 otherwise.
**/
static int qla4xxx_eh_wait_for_commands(struct scsi_qla_host *ha,
struct scsi_target *stgt,
struct scsi_device *sdev)
{
int cnt;
int status = 0;
struct scsi_cmnd *cmd;
/*
* Waiting for all commands for the designated target or dev
* in the active array
*/
for (cnt = 0; cnt < ha->host->can_queue; cnt++) {
cmd = scsi_host_find_tag(ha->host, cnt);
if (cmd && stgt == scsi_target(cmd->device) &&
(!sdev || sdev == cmd->device)) {
if (!qla4xxx_eh_wait_on_command(ha, cmd)) {
status++;
break;
}
}
}
return status;
}
/**
* qla4xxx_eh_abort - callback for abort task.
* @cmd: Pointer to Linux's SCSI command structure
*
* This routine is called by the Linux OS to abort the specified
* command.
**/
static int qla4xxx_eh_abort(struct scsi_cmnd *cmd)
{
struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
unsigned int id = cmd->device->id;
unsigned int lun = cmd->device->lun;
unsigned long flags;
struct srb *srb = NULL;
int ret = SUCCESS;
int wait = 0;
ql4_printk(KERN_INFO, ha,
"scsi%ld:%d:%d: Abort command issued cmd=%p\n",
ha->host_no, id, lun, cmd);
spin_lock_irqsave(&ha->hardware_lock, flags);
srb = (struct srb *) CMD_SP(cmd);
if (!srb) {
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return SUCCESS;
}
kref_get(&srb->srb_ref);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (qla4xxx_abort_task(ha, srb) != QLA_SUCCESS) {
DEBUG3(printk("scsi%ld:%d:%d: Abort_task mbx failed.\n",
ha->host_no, id, lun));
ret = FAILED;
} else {
DEBUG3(printk("scsi%ld:%d:%d: Abort_task mbx success.\n",
ha->host_no, id, lun));
wait = 1;
}
kref_put(&srb->srb_ref, qla4xxx_srb_compl);
/* Wait for command to complete */
if (wait) {
if (!qla4xxx_eh_wait_on_command(ha, cmd)) {
DEBUG2(printk("scsi%ld:%d:%d: Abort handler timed out\n",
ha->host_no, id, lun));
ret = FAILED;
}
}
ql4_printk(KERN_INFO, ha,
"scsi%ld:%d:%d: Abort command - %s\n",
ha->host_no, id, lun, (ret == SUCCESS) ? "succeeded" : "failed");
return ret;
}
/**
* qla4xxx_eh_device_reset - callback for target reset.
* @cmd: Pointer to Linux's SCSI command structure
*
* This routine is called by the Linux OS to reset all luns on the
* specified target.
**/
static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd)
{
struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
struct ddb_entry *ddb_entry = cmd->device->hostdata;
int ret = FAILED, stat;
if (!ddb_entry)
return ret;
ret = iscsi_block_scsi_eh(cmd);
if (ret)
return ret;
ret = FAILED;
ql4_printk(KERN_INFO, ha,
"scsi%ld:%d:%d:%d: DEVICE RESET ISSUED.\n", ha->host_no,
cmd->device->channel, cmd->device->id, cmd->device->lun);
DEBUG2(printk(KERN_INFO
"scsi%ld: DEVICE_RESET cmd=%p jiffies = 0x%lx, to=%x,"
"dpc_flags=%lx, status=%x allowed=%d\n", ha->host_no,
cmd, jiffies, cmd->request->timeout / HZ,
ha->dpc_flags, cmd->result, cmd->allowed));
/* FIXME: wait for hba to go online */
stat = qla4xxx_reset_lun(ha, ddb_entry, cmd->device->lun);
if (stat != QLA_SUCCESS) {
ql4_printk(KERN_INFO, ha, "DEVICE RESET FAILED. %d\n", stat);
goto eh_dev_reset_done;
}
if (qla4xxx_eh_wait_for_commands(ha, scsi_target(cmd->device),
cmd->device)) {
ql4_printk(KERN_INFO, ha,
"DEVICE RESET FAILED - waiting for "
"commands.\n");
goto eh_dev_reset_done;
}
/* Send marker. */
if (qla4xxx_send_marker_iocb(ha, ddb_entry, cmd->device->lun,
MM_LUN_RESET) != QLA_SUCCESS)
goto eh_dev_reset_done;
ql4_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d:%d): DEVICE RESET SUCCEEDED.\n",
ha->host_no, cmd->device->channel, cmd->device->id,
cmd->device->lun);
ret = SUCCESS;
eh_dev_reset_done:
return ret;
}
/**
* qla4xxx_eh_target_reset - callback for target reset.
* @cmd: Pointer to Linux's SCSI command structure
*
* This routine is called by the Linux OS to reset the target.
**/
static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd)
{
struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
struct ddb_entry *ddb_entry = cmd->device->hostdata;
int stat, ret;
if (!ddb_entry)
return FAILED;
ret = iscsi_block_scsi_eh(cmd);
if (ret)
return ret;
starget_printk(KERN_INFO, scsi_target(cmd->device),
"WARM TARGET RESET ISSUED.\n");
DEBUG2(printk(KERN_INFO
"scsi%ld: TARGET_DEVICE_RESET cmd=%p jiffies = 0x%lx, "
"to=%x,dpc_flags=%lx, status=%x allowed=%d\n",
ha->host_no, cmd, jiffies, cmd->request->timeout / HZ,
ha->dpc_flags, cmd->result, cmd->allowed));
stat = qla4xxx_reset_target(ha, ddb_entry);
if (stat != QLA_SUCCESS) {
starget_printk(KERN_INFO, scsi_target(cmd->device),
"WARM TARGET RESET FAILED.\n");
return FAILED;
}
if (qla4xxx_eh_wait_for_commands(ha, scsi_target(cmd->device),
NULL)) {
starget_printk(KERN_INFO, scsi_target(cmd->device),
"WARM TARGET DEVICE RESET FAILED - "
"waiting for commands.\n");
return FAILED;
}
/* Send marker. */
if (qla4xxx_send_marker_iocb(ha, ddb_entry, cmd->device->lun,
MM_TGT_WARM_RESET) != QLA_SUCCESS) {
starget_printk(KERN_INFO, scsi_target(cmd->device),
"WARM TARGET DEVICE RESET FAILED - "
"marker iocb failed.\n");
return FAILED;
}
starget_printk(KERN_INFO, scsi_target(cmd->device),
"WARM TARGET RESET SUCCEEDED.\n");
return SUCCESS;
}
/**
* qla4xxx_eh_host_reset - kernel callback
* @cmd: Pointer to Linux's SCSI command structure
*
* This routine is invoked by the Linux kernel to perform fatal error
* recovery on the specified adapter.
**/
static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd)
{
int return_status = FAILED;
struct scsi_qla_host *ha;
ha = to_qla_host(cmd->device->host);
if (ql4xdontresethba) {
DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n",
ha->host_no, __func__));
return FAILED;
}
ql4_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d:%d): HOST RESET ISSUED.\n", ha->host_no,
cmd->device->channel, cmd->device->id, cmd->device->lun);
if (qla4xxx_wait_for_hba_online(ha) != QLA_SUCCESS) {
DEBUG2(printk("scsi%ld:%d: %s: Unable to reset host. Adapter "
"DEAD.\n", ha->host_no, cmd->device->channel,
__func__));
return FAILED;
}
if (!test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
if (is_qla8022(ha))
set_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags);
else
set_bit(DPC_RESET_HA, &ha->dpc_flags);
}
if (qla4xxx_recover_adapter(ha) == QLA_SUCCESS)
return_status = SUCCESS;
ql4_printk(KERN_INFO, ha, "HOST RESET %s.\n",
return_status == FAILED ? "FAILED" : "SUCCEEDED");
return return_status;
}
/* PCI AER driver recovers from all correctable errors w/o
* driver intervention. For uncorrectable errors PCI AER
* driver calls the following device driver's callbacks
*
* - Fatal Errors - link_reset
* - Non-Fatal Errors - driver's pci_error_detected() which
* returns CAN_RECOVER, NEED_RESET or DISCONNECT.
*
* PCI AER driver calls
* CAN_RECOVER - driver's pci_mmio_enabled(), mmio_enabled
* returns RECOVERED or NEED_RESET if fw_hung
* NEED_RESET - driver's slot_reset()
* DISCONNECT - device is dead & cannot recover
* RECOVERED - driver's pci_resume()
*/
static pci_ers_result_t
qla4xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
{
struct scsi_qla_host *ha = pci_get_drvdata(pdev);
ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: error detected:state %x\n",
ha->host_no, __func__, state);
if (!is_aer_supported(ha))
return PCI_ERS_RESULT_NONE;
switch (state) {
case pci_channel_io_normal:
clear_bit(AF_EEH_BUSY, &ha->flags);
return PCI_ERS_RESULT_CAN_RECOVER;
case pci_channel_io_frozen:
set_bit(AF_EEH_BUSY, &ha->flags);
qla4xxx_mailbox_premature_completion(ha);
qla4xxx_free_irqs(ha);
pci_disable_device(pdev);
/* Return back all IOs */
qla4xxx_abort_active_cmds(ha, DID_RESET << 16);
return PCI_ERS_RESULT_NEED_RESET;
case pci_channel_io_perm_failure:
set_bit(AF_EEH_BUSY, &ha->flags);
set_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags);
qla4xxx_abort_active_cmds(ha, DID_NO_CONNECT << 16);
return PCI_ERS_RESULT_DISCONNECT;
}
return PCI_ERS_RESULT_NEED_RESET;
}
/**
* qla4xxx_pci_mmio_enabled() gets called if
* qla4xxx_pci_error_detected() returns PCI_ERS_RESULT_CAN_RECOVER
* and read/write to the device still works.
**/
static pci_ers_result_t
qla4xxx_pci_mmio_enabled(struct pci_dev *pdev)
{
struct scsi_qla_host *ha = pci_get_drvdata(pdev);
if (!is_aer_supported(ha))
return PCI_ERS_RESULT_NONE;
return PCI_ERS_RESULT_RECOVERED;
}
static uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
{
uint32_t rval = QLA_ERROR;
uint32_t ret = 0;
int fn;
struct pci_dev *other_pdev = NULL;
ql4_printk(KERN_WARNING, ha, "scsi%ld: In %s\n", ha->host_no, __func__);
set_bit(DPC_RESET_ACTIVE, &ha->dpc_flags);
if (test_bit(AF_ONLINE, &ha->flags)) {
clear_bit(AF_ONLINE, &ha->flags);
clear_bit(AF_LINK_UP, &ha->flags);
iscsi_host_for_each_session(ha->host, qla4xxx_fail_session);
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
}
fn = PCI_FUNC(ha->pdev->devfn);
while (fn > 0) {
fn--;
ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Finding PCI device at "
"func %x\n", ha->host_no, __func__, fn);
/* Get the pci device given the domain, bus,
* slot/function number */
other_pdev =
pci_get_domain_bus_and_slot(pci_domain_nr(ha->pdev->bus),
ha->pdev->bus->number, PCI_DEVFN(PCI_SLOT(ha->pdev->devfn),
fn));
if (!other_pdev)
continue;
if (atomic_read(&other_pdev->enable_cnt)) {
ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Found PCI "
"func in enabled state%x\n", ha->host_no,
__func__, fn);
pci_dev_put(other_pdev);
break;
}
pci_dev_put(other_pdev);
}
/* The first function on the card, the reset owner will
* start & initialize the firmware. The other functions
* on the card will reset the firmware context
*/
if (!fn) {
ql4_printk(KERN_INFO, ha, "scsi%ld: %s: devfn being reset "
"0x%x is the owner\n", ha->host_no, __func__,
ha->pdev->devfn);
qla4_8xxx_idc_lock(ha);
qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
QLA82XX_DEV_COLD);
qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_IDC_VERSION,
QLA82XX_IDC_VERSION);
qla4_8xxx_idc_unlock(ha);
clear_bit(AF_FW_RECOVERY, &ha->flags);
rval = qla4xxx_initialize_adapter(ha);
qla4_8xxx_idc_lock(ha);
if (rval != QLA_SUCCESS) {
ql4_printk(KERN_INFO, ha, "scsi%ld: %s: HW State: "
"FAILED\n", ha->host_no, __func__);
qla4_8xxx_clear_drv_active(ha);
qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
QLA82XX_DEV_FAILED);
} else {
ql4_printk(KERN_INFO, ha, "scsi%ld: %s: HW State: "
"READY\n", ha->host_no, __func__);
qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
QLA82XX_DEV_READY);
/* Clear driver state register */
qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_STATE, 0);
qla4_8xxx_set_drv_active(ha);
ret = qla4xxx_request_irqs(ha);
if (ret) {
ql4_printk(KERN_WARNING, ha, "Failed to "
"reserve interrupt %d already in use.\n",
ha->pdev->irq);
rval = QLA_ERROR;
} else {
ha->isp_ops->enable_intrs(ha);
rval = QLA_SUCCESS;
}
}
qla4_8xxx_idc_unlock(ha);
} else {
ql4_printk(KERN_INFO, ha, "scsi%ld: %s: devfn 0x%x is not "
"the reset owner\n", ha->host_no, __func__,
ha->pdev->devfn);
if ((qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE) ==
QLA82XX_DEV_READY)) {
clear_bit(AF_FW_RECOVERY, &ha->flags);
rval = qla4xxx_initialize_adapter(ha);
if (rval == QLA_SUCCESS) {
ret = qla4xxx_request_irqs(ha);
if (ret) {
ql4_printk(KERN_WARNING, ha, "Failed to"
" reserve interrupt %d already in"
" use.\n", ha->pdev->irq);
rval = QLA_ERROR;
} else {
ha->isp_ops->enable_intrs(ha);
rval = QLA_SUCCESS;
}
}
qla4_8xxx_idc_lock(ha);
qla4_8xxx_set_drv_active(ha);
qla4_8xxx_idc_unlock(ha);
}
}
clear_bit(DPC_RESET_ACTIVE, &ha->dpc_flags);
return rval;
}
static pci_ers_result_t
qla4xxx_pci_slot_reset(struct pci_dev *pdev)
{
pci_ers_result_t ret = PCI_ERS_RESULT_DISCONNECT;
struct scsi_qla_host *ha = pci_get_drvdata(pdev);
int rc;
ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: slot_reset\n",
ha->host_no, __func__);
if (!is_aer_supported(ha))
return PCI_ERS_RESULT_NONE;
/* Restore the saved state of PCIe device -
* BAR registers, PCI Config space, PCIX, MSI,
* IOV states
*/
pci_restore_state(pdev);
/* pci_restore_state() clears the saved_state flag of the device
* save restored state which resets saved_state flag
*/
pci_save_state(pdev);
/* Initialize device or resume if in suspended state */
rc = pci_enable_device(pdev);
if (rc) {
ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Can't re-enable "
"device after reset\n", ha->host_no, __func__);
goto exit_slot_reset;
}
ha->isp_ops->disable_intrs(ha);
if (is_qla8022(ha)) {
if (qla4_8xxx_error_recovery(ha) == QLA_SUCCESS) {
ret = PCI_ERS_RESULT_RECOVERED;
goto exit_slot_reset;
} else
goto exit_slot_reset;
}
exit_slot_reset:
ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Return=%x\n"
"device after reset\n", ha->host_no, __func__, ret);
return ret;
}
static void
qla4xxx_pci_resume(struct pci_dev *pdev)
{
struct scsi_qla_host *ha = pci_get_drvdata(pdev);
int ret;
ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: pci_resume\n",
ha->host_no, __func__);
ret = qla4xxx_wait_for_hba_online(ha);
if (ret != QLA_SUCCESS) {
ql4_printk(KERN_ERR, ha, "scsi%ld: %s: the device failed to "
"resume I/O from slot/link_reset\n", ha->host_no,
__func__);
}
pci_cleanup_aer_uncorrect_error_status(pdev);
clear_bit(AF_EEH_BUSY, &ha->flags);
}
static struct pci_error_handlers qla4xxx_err_handler = {
.error_detected = qla4xxx_pci_error_detected,
.mmio_enabled = qla4xxx_pci_mmio_enabled,
.slot_reset = qla4xxx_pci_slot_reset,
.resume = qla4xxx_pci_resume,
};
static struct pci_device_id qla4xxx_pci_tbl[] = {
{
.vendor = PCI_VENDOR_ID_QLOGIC,
.device = PCI_DEVICE_ID_QLOGIC_ISP4010,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
{
.vendor = PCI_VENDOR_ID_QLOGIC,
.device = PCI_DEVICE_ID_QLOGIC_ISP4022,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
{
.vendor = PCI_VENDOR_ID_QLOGIC,
.device = PCI_DEVICE_ID_QLOGIC_ISP4032,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
{
.vendor = PCI_VENDOR_ID_QLOGIC,
.device = PCI_DEVICE_ID_QLOGIC_ISP8022,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
{0, 0},
};
MODULE_DEVICE_TABLE(pci, qla4xxx_pci_tbl);
static struct pci_driver qla4xxx_pci_driver = {
.name = DRIVER_NAME,
.id_table = qla4xxx_pci_tbl,
.probe = qla4xxx_probe_adapter,
.remove = qla4xxx_remove_adapter,
.err_handler = &qla4xxx_err_handler,
};
static int __init qla4xxx_module_init(void)
{
int ret;
/* Allocate cache for SRBs. */
srb_cachep = kmem_cache_create("qla4xxx_srbs", sizeof(struct srb), 0,
SLAB_HWCACHE_ALIGN, NULL);
if (srb_cachep == NULL) {
printk(KERN_ERR
"%s: Unable to allocate SRB cache..."
"Failing load!\n", DRIVER_NAME);
ret = -ENOMEM;
goto no_srp_cache;
}
/* Derive version string. */
strcpy(qla4xxx_version_str, QLA4XXX_DRIVER_VERSION);
if (ql4xextended_error_logging)
strcat(qla4xxx_version_str, "-debug");
qla4xxx_scsi_transport =
iscsi_register_transport(&qla4xxx_iscsi_transport);
if (!qla4xxx_scsi_transport){
ret = -ENODEV;
goto release_srb_cache;
}
ret = pci_register_driver(&qla4xxx_pci_driver);
if (ret)
goto unregister_transport;
printk(KERN_INFO "QLogic iSCSI HBA Driver\n");
return 0;
unregister_transport:
iscsi_unregister_transport(&qla4xxx_iscsi_transport);
release_srb_cache:
kmem_cache_destroy(srb_cachep);
no_srp_cache:
return ret;
}
static void __exit qla4xxx_module_exit(void)
{
pci_unregister_driver(&qla4xxx_pci_driver);
iscsi_unregister_transport(&qla4xxx_iscsi_transport);
kmem_cache_destroy(srb_cachep);
}
module_init(qla4xxx_module_init);
module_exit(qla4xxx_module_exit);
MODULE_AUTHOR("QLogic Corporation");
MODULE_DESCRIPTION("QLogic iSCSI HBA Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(QLA4XXX_DRIVER_VERSION);