OpenCloudOS-Kernel/include/linux/sdlapci.h

73 lines
3.0 KiB
C

/*****************************************************************************
* sdlapci.h WANPIPE(tm) Multiprotocol WAN Link Driver.
* Definitions for the SDLA PCI adapter.
*
* Author: Gideon Hack <ghack@sangoma.com>
*
* Copyright: (c) 1999-2000 Sangoma Technologies Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
* ============================================================================
* Jun 02, 1999 Gideon Hack Initial version.
*****************************************************************************/
#ifndef _SDLAPCI_H
#define _SDLAPCI_H
/****** Defines *************************************************************/
/* Definitions for identifying and finding S514 PCI adapters */
#define V3_VENDOR_ID 0x11B0 /* V3 vendor ID number */
#define V3_DEVICE_ID 0x0002 /* V3 device ID number */
#define SANGOMA_SUBSYS_VENDOR 0x4753 /* ID for Sangoma */
#define PCI_DEV_SLOT_MASK 0x1F /* mask for slot numbering */
#define PCI_IRQ_NOT_ALLOCATED 0xFF /* interrupt line for no IRQ */
/* Local PCI register offsets */
#define PCI_VENDOR_ID_WORD 0x00 /* vendor ID */
#define PCI_IO_BASE_DWORD 0x10 /* IO base */
#define PCI_MEM_BASE0_DWORD 0x14 /* memory base - apperture 0 */
#define PCI_MEM_BASE1_DWORD 0x18 /* memory base - apperture 1 */
#define PCI_SUBSYS_VENDOR_WORD 0x2C /* subsystem vendor ID */
#define PCI_INT_LINE_BYTE 0x3C /* interrupt line */
#define PCI_INT_PIN_BYTE 0x3D /* interrupt pin */
#define PCI_MAP0_DWORD 0x40 /* PCI to local bus address 0 */
#define PCI_MAP1_DWORD 0x44 /* PCI to local bus address 1 */
#define PCI_INT_STATUS 0x48 /* interrupt status */
#define PCI_INT_CONFIG 0x4C /* interrupt configuration */
/* Local PCI register usage */
#define PCI_MEMORY_ENABLE 0x00000003 /* enable PCI memory */
#define PCI_CPU_A_MEM_DISABLE 0x00000002 /* disable CPU A memory */
#define PCI_CPU_B_MEM_DISABLE 0x00100002 /* disable CPU B memory */
#define PCI_ENABLE_IRQ_CPU_A 0x005A0004 /* enable IRQ for CPU A */
#define PCI_ENABLE_IRQ_CPU_B 0x005A0008 /* enable IRQ for CPU B */
#define PCI_DISABLE_IRQ_CPU_A 0x00000004 /* disable IRQ for CPU A */
#define PCI_DISABLE_IRQ_CPU_B 0x00000008 /* disable IRQ for CPU B */
/* Setting for the Interrupt Status register */
#define IRQ_CPU_A 0x04 /* IRQ for CPU A */
#define IRQ_CPU_B 0x08 /* IRQ for CPU B */
/* The maximum size of the S514 memory */
#define MAX_SIZEOF_S514_MEMORY (256 * 1024)
/* S514 control register offsets within the memory address space */
#define S514_CTRL_REG_BYTE 0x80000
/* S514 adapter control bytes */
#define S514_CPU_HALT 0x00
#define S514_CPU_START 0x01
/* The maximum number of S514 adapters supported */
#define MAX_S514_CARDS 20
#define PCI_CARD_TYPE 0x2E
#define S514_DUAL_CPU 0x12
#define S514_SINGLE_CPU 0x11
#endif /* _SDLAPCI_H */