UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/mach-omap2
History
Tony Lindgren fb677ef70b ARM: OMAP2+: Fix GPMC remap for devices using an offset 
At least the smc91x driver expects the device to be at 0x300
offset from bus base address. This does not work currently
for GPMC when booted in device tree mode as it attempts to
remap the the allocated GPMC partition to the address
configured by the device tree plus the device offset.

Note that this works just fine when booted with legacy mode.

Let's fix the issue by just ignoring any device specific
offset while remapping. And let's make sure the remap
address confirms to the GPMC 16MB minimum granularity
as listed in the TRM for GPMC_CONFIG7 BASEADDRESS bits.

Otherwise we can get something like this:

omap-gpmc 6e000000.gpmc: cannot remap GPMC CS 1 to 0x01000300

Cc: Pekon Gupta <pekon@ti.com>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
 		2014-04-23 11:09:22 -07:00
..
include/mach ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too 2013-12-20 17:17:16 +01:00
Kconfig ARM: SoC: driver changes 2014-04-05 15:37:40 -07:00
Makefile ARM: OMAP2+: AM43xx: implement support for machine restart 2014-02-28 12:43:45 -07:00
Makefile.boot ARM: dtb: move all dtb targets to common Makefile 2012-09-20 22:58:17 -07:00
am33xx-restart.c ARM: OMAP2+: am33xx-restart: trigger warm reset on omap2+ boards 2013-08-21 01:01:30 -07:00
am33xx.h ARM: OMAP2+: AM43x: early init 2013-06-12 08:00:35 -07:00
am35xx-emac.c ARM: 7989/1: Delete asm/system.h 2014-02-25 11:33:37 +00:00
am35xx-emac.h
…
am35xx.h ARM: OMAP2+: Make am35xx.h local 2012-09-20 15:02:23 -07:00
board-3430sdp.c ARM: OMAP: 3430SDP: use new display drivers 2013-08-28 10:23:21 +03:00
board-am3517crane.c ARM: OMAP2: remove useless variable 'ret' 2013-08-22 00:15:17 -07:00
board-am3517evm.c ARM: SoC cleanups for 3.12 2013-09-06 13:21:16 -07:00
board-cm-t35.c [media] ARM: omap2: cm-t35: Add regulators and clock for camera sensor 2014-02-24 13:10:14 -03:00
board-cm-t3517.c Clean-up for omap2+ timers from Jon Hunter <jon-hunter@ti.com>: 2013-04-08 19:30:48 +02:00
board-devkit8000.c ARM: OMAP: devkit8000: use new display drivers 2013-08-28 10:23:20 +03:00
board-flash.c mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes 2013-11-06 23:33:07 -08:00
board-flash.h ARM: OMAP2+: gpmc: localize gpmc header 2012-10-15 14:42:15 +05:30
board-generic.c fbdev changes for 3.15 (OMAP) 2014-04-07 10:47:51 -07:00
board-ldp.c ARM: OMAP2+: Fix LCD panel backlight regression for LDP legacy booting 2013-12-27 09:33:27 -08:00
board-n8x0.c ARM: OMAP2+: dts: add n8x0 onenand 2013-11-25 15:38:09 -08:00
board-omap3beagle.c ARM: SoC fixes for 3.13 merge window 2013-11-16 12:45:55 -08:00
board-omap3logic.c arm-soc: cleanups 2013-02-21 14:58:40 -08:00
board-omap3pandora.c wl1251: move power GPIO handling into the driver 2014-02-28 14:08:26 -05:00
board-omap3stalker.c misc: (at24) move header to linux/platform_data/ 2013-09-30 06:02:34 +02:00
board-omap3touchbook.c ARM: OMAP3: omap3touchbook: Adapt to ehci-omap changes 2013-04-02 10:00:01 -07:00
board-overo.c ARM: OMAP: overo: use new display drivers 2013-08-28 10:23:19 +03:00
board-rx51-peripherals.c wl1251: move power GPIO handling into the driver 2014-02-28 14:08:26 -05:00
board-rx51-video.c ARM: OMAP2+: N900: remove omapdss init for DT boot 2014-04-18 16:37:43 -07:00
board-rx51.c ARM: OMAP3: RX-51: ARM errata 430973 workaround 2013-10-08 11:57:04 -07:00
board-rx51.h ARM: OMAP2+: Make board-rx51.h local 2012-09-20 15:02:27 -07:00
board-ti8168evm.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
cclock3xxx_data.c == Changes to existing drivers == 2014-04-07 10:24:18 -07:00
cclock2420_data.c ARM: OMAP2+: clock data: Remove CK_* flags 2013-03-18 09:57:39 -06:00
cclock2430_data.c ARM: OMAP2xxx: hwmod: Convert AES crypto devcie data to hwmod 2013-03-30 15:51:33 -06:00
clkt2xxx_apll.c ARM: OMAP2: CM/PM: remove direct register accesses outside CM code 2013-10-19 10:11:51 -06:00
clkt2xxx_dpll.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_dpllcore.c ARM: OMAP2: CM/PM: remove direct register accesses outside CM code 2013-10-19 10:11:51 -06:00
clkt2xxx_osc.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_sys.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_virt_prcm_set.c ARM: OMAP2: CM/PM: remove direct register accesses outside CM code 2013-10-19 10:11:51 -06:00
clkt34xx_dpll3m2.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
clkt_clksel.c ARM: OMAP2+: clock: use driver API instead of direct memory read/write 2014-01-17 12:37:00 -08:00
clkt_dpll.c ARM: AM43xx: fix dpll init in bypass mode 2014-04-11 12:29:09 -06:00
clkt_iclk.c ARM: OMAP2+: clock: use driver API instead of direct memory read/write 2014-01-17 12:37:00 -08:00
clock.c ARM: OMAP2+: clock: use driver API instead of direct memory read/write 2014-01-17 12:37:00 -08:00
clock.h ARM: OMAP2+: clock: add support for indexed memmaps 2014-01-17 12:36:57 -08:00
clock2xxx.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
clock2xxx.h ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock3xxx.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
clock3xxx.h CLK: TI: add omap3 clock init file 2014-01-17 12:35:48 -08:00
clock34xx.c ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock34xx.h
…
clock36xx.c ARM: OMAP2+: clock: use driver API instead of direct memory read/write 2014-01-17 12:37:00 -08:00
clock36xx.h ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock44xx.h
…
clock2430.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock3517.c ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock3517.h
…
clock_common_data.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clockdomain.c ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints 2013-01-29 14:59:58 -07:00
clockdomain.h ARM: OMAP2+: CM: AM43x clockdomain data 2013-10-13 22:48:36 -06:00
clockdomains2xxx_3xxx_data.c ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer 2012-07-05 17:25:38 -07:00
clockdomains3xxx_data.c ARM: OMAP3: fix iva mmu programming issues 2014-03-12 09:48:26 -07:00
clockdomains7xx_data.c ARM: OMAP: DRA7: clockdomain: Add DRA7XX data and update header 2013-08-23 04:28:36 -06:00
clockdomains33xx_data.c ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations 2012-06-18 12:08:06 -06:00
clockdomains43xx_data.c ARM: OMAP2+: CM: AM43x clockdomain data 2013-10-13 22:48:36 -06:00
clockdomains44xx_data.c ARM: OMAP2+: clockdomain: Fix OMAP4 ISS clk domain to support only SWSUP 2012-10-29 22:02:13 -06:00
clockdomains54xx_data.c ARM: OMAP5: clockdomain data: Add OMAP54XX data and update the header 2013-06-08 11:56:15 -06:00
clockdomains2420_data.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
clockdomains2430_data.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
cm-regbits-7xx.h ARM: OMAP: DRA7: CM: Add minimal regbit shifts 2013-08-23 04:28:36 -06:00
cm-regbits-24xx.h ARM: OMAP2: PRM/CM: Cleanup unused header 2013-07-21 21:13:59 -06:00
cm-regbits-33xx.h ARM: OMAP3: PRM/CM: Cleanup unused header 2013-07-21 22:10:03 -06:00
cm-regbits-34xx.h ARM: OMAP3: PRM/CM: Cleanup unused header 2013-07-21 22:10:03 -06:00
cm-regbits-44xx.h ARM: OMAP4: PRM/CM: Cleanup unused header 2013-07-21 22:10:14 -06:00
cm-regbits-54xx.h ARM: OMAP5: PRM/CM: Cleanup unused header 2013-07-21 22:10:25 -06:00
cm.h ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
cm1_7xx.h ARM: OMAP: DRA7: CM: Add DRA7XX register defines 2013-08-23 04:24:15 -06:00
cm1_44xx.h ARM: OMAP4+: CM: Move function prototypes to common header for re-use 2013-06-08 11:41:39 -06:00
cm1_54xx.h ARM: OMAP5: CM: Add OMAP54XX register and bitfield files 2013-06-08 11:46:09 -06:00
cm2_7xx.h ARM: OMAP: DRA7: CM: Add DRA7XX register defines 2013-08-23 04:24:15 -06:00
cm2_44xx.h ARM: OMAP4+: CM: Move function prototypes to common header for re-use 2013-06-08 11:41:39 -06:00
cm2_54xx.h ARM: OMAP5: CM: Add OMAP54XX register and bitfield files 2013-06-08 11:46:09 -06:00
cm2xxx.c ARM: OMAP2: CM/PM: remove direct register accesses outside CM code 2013-10-19 10:11:51 -06:00
cm2xxx.h ARM: OMAP2: CM/PM: remove direct register accesses outside CM code 2013-10-19 10:11:51 -06:00
cm2xxx_3xxx.h ARM: OMAP3: clock: Add 3xxx data using common struct clk 2012-11-12 19:18:49 -07:00
cm3xxx.c ARM: OMAP3: CM/control: move CM scratchpad save to CM driver 2013-10-19 10:11:52 -06:00
cm3xxx.h ARM: OMAP3: CM/control: move CM scratchpad save to CM driver 2013-10-19 10:11:52 -06:00
cm33xx.c ARM: OMAP2+: CM: cm_inst offset s16->u16 2013-10-13 22:46:38 -06:00
cm33xx.h ARM: OMAP2+: AM43x: PRCM kbuild 2013-10-13 22:49:06 -06:00
cm44xx.c
…
cm44xx.h
…
cm_44xx_54xx.h ARM: OMAP4+: CM: Move function prototypes to common header for re-use 2013-06-08 11:41:39 -06:00
cm_common.c ARM: OMAP2: Fix compillation error in cm_common 2012-11-12 13:42:46 -08:00
cminst44xx.c ARM: OMAP2+: clockdomain: Reintroduce SW_SLEEP Support 2014-02-28 12:43:46 -07:00
cminst44xx.h ARM: OMAP2+: CM: cm_inst offset s16->u16 2013-10-13 22:46:38 -06:00
common-board-devices.c ARM: arm-soc: Header cleanups 2012-12-12 11:45:16 -08:00
common-board-devices.h ARM: OMAP2+: Add quirks support for n8x0 2013-11-25 15:31:17 -08:00
common.c ARM: OMAP2+: common: remove use of vram 2012-12-16 11:19:48 -08:00
common.h ARM: OMAP2+: DT 'compatible' tweak for displays 2014-03-19 11:02:46 +02:00
control.c ARM: OMAP3: control: add API for setting IVA bootmode 2013-10-19 10:11:52 -06:00
control.h ARM: OMAP3: control: add API for setting IVA bootmode 2013-10-19 10:11:52 -06:00
cpuidle34xx.c ARM: arm-soc cleanup for 3.10 2013-05-02 09:03:55 -07:00
cpuidle44xx.c ARM: OMAP: Kill warning in CPUIDLE code with !CONFIG_SMP 2014-02-21 15:16:56 -08:00
ctrl_module_core_44xx.h ARM: OMAP2+: Make ctrl_module_core_44xx.h local 2012-09-20 15:02:29 -07:00
ctrl_module_pad_core_44xx.h ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local 2012-09-20 15:02:30 -07:00
ctrl_module_pad_wkup_44xx.h ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local 2012-09-20 15:02:32 -07:00
ctrl_module_wkup_44xx.h ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local 2012-09-20 15:02:33 -07:00
devices.c ARM: OMAP2+: change the ISP device archdata MMU name for DT 2014-03-12 09:49:03 -07:00
devices.h
…
display.c Merge branch '3.15/dss-dt' into 3.15/fbdev 2014-03-20 08:13:50 +02:00
display.h ARM: OMAP2+: add omapdss_init_of() 2014-03-19 10:52:23 +02:00
dma.c dmaengine: omap-dma: move register read/writes into omap-dma.c 2014-04-04 00:31:49 +01:00
dpll3xxx.c ARM: SoC specific changes 2014-04-05 14:19:54 -07:00
dpll44xx.c ARM: OMAP2+: clock: use driver API instead of direct memory read/write 2014-01-17 12:37:00 -08:00
drm.c ARM: OMAP2+: display: Create omapdrm device inside omap_display_init 2013-10-08 14:02:35 -07:00
dsp.c ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS" 2013-04-01 08:52:50 -07:00
dss-common.c ARM: OMAP2+: remove pdata quirks for displays 2014-04-04 09:55:18 +03:00
dss-common.h ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board 2013-10-09 07:54:34 -07:00
emu.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
fb.c ARM: OMAP2+: display: Create omapvrfb and omapfb devices inside omap_display_init 2013-10-08 14:02:51 -07:00
gpio.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
gpmc-nand.c ARM: OMAP2+: gpmc: update gpmc_hwecc_bch_capable() for new platforms and ECC schemes 2014-03-02 10:15:52 -08:00
gpmc-nand.h ARM: OMAP2+: gpmc: localize gpmc header 2012-10-15 14:42:15 +05:30
gpmc-onenand.c ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT 2013-10-03 10:59:50 -07:00
gpmc-onenand.h ARM: OMAP2+: onenand: header cleanup 2012-10-15 14:42:03 +05:30
gpmc-smc91x.c ARM: OMAP2+: Convert SMC91x to use gpmc_cs_program_settings() 2013-04-01 14:53:43 -05:00
gpmc-smc91x.h ARM: OMAP2+: Make gpmc-smc91x.h local 2012-09-20 15:02:49 -07:00
gpmc-smsc911x.c ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init() 2013-11-14 10:40:36 -08:00
gpmc-smsc911x.h ARM: OMAP2+: Make gpmc-smsc911x.h local 2012-09-20 15:03:55 -07:00
gpmc.c ARM: OMAP2+: Fix GPMC remap for devices using an offset 2014-04-23 11:09:22 -07:00
gpmc.h ARM: OMAP2+: Add function to read GPMC settings from device-tree 2013-04-01 14:53:45 -05:00
hdq1w.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
hdq1w.h ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00
hsmmc.c ARM: OMAP2+: Remove omap4 pdata from hsmmc.c 2013-05-30 13:09:31 -07:00
hsmmc.h
…
hwspinlock.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
i2c.c PTR_RET is now PTR_ERR_OR_ZERO(): Replace most. 2013-07-15 11:25:01 +09:30
i2c.h ARM: OMAP: Fix relative includes for shared i2c.h file 2012-10-31 15:37:13 -07:00
id.c ARM: OMAP2+: AM43x: determine features 2014-02-28 15:33:27 -08:00
id.h ARM: OMAP2+: Make id.h local 2012-09-20 15:02:22 -07:00
io.c i.MX SoC changes for 3.15: 2014-03-09 12:03:18 -07:00
iomap.h ARM: OMAP5: Add minimal support for OMAP5430 SOC 2012-07-09 19:14:39 +05:30
irq.c ARM: OMAP2+: INTC: Acknowledge stuck active interrupts 2014-03-13 13:34:48 -07:00
l3_2xxx.h ARM: OMAP2+: Make l3_2xxx.h local 2012-09-20 15:03:59 -07:00
l3_3xxx.h ARM: OMAP2+: Make l3_3xxx.h local 2012-09-20 15:04:00 -07:00
l4_2xxx.h ARM: OMAP2+: Make l4_2xxx.h local 2012-09-20 15:04:01 -07:00
l4_3xxx.h ARM: OMAP2+: Make l4_3xxx.h local 2012-09-20 15:04:03 -07:00
mcbsp.c ARM: OMAP3: McBSP: do not access CM register directly 2013-10-19 10:11:51 -06:00
mmc.h ARM: OMAP: Split plat/mmc.h into local headers and platform_data 2012-10-15 12:09:43 -07:00
msdi.c ARM: OMAP2+: Remove legacy booting support for n8x0 2013-11-25 15:31:17 -08:00
mux.c ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap 2013-10-10 15:46:30 -07:00
mux.h ARM: OMAP2+: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF 2014-02-28 15:36:34 -08:00
mux34xx.c ARM: OMAP2+: mux: fix trivial typo in name 2013-09-18 12:02:01 -07:00
mux34xx.h omap: mux: add AM/DM37x gpios 2013-05-08 17:07:40 -07:00
omap-headsmp.S arm: delete __cpuinit/__CPUINIT usage from all ARM users 2013-07-14 19:36:52 -04:00
omap-hotplug.c ARM: cpu hotplug: remove majority of cache flushing from platforms 2013-04-18 20:08:04 +01:00
omap-iommu.c iommu/omap: Add devicetree support 2014-03-04 17:01:57 +01:00
omap-mpuss-lowpower.c ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidle 2014-01-31 14:57:32 -08:00
omap-pm-noop.c ARM: OMAP: Move omap-pm-noop.c local to mach-omap2 2012-10-31 15:37:13 -07:00
omap-pm.h PM / OPP: rename header to linux/pm_opp.h 2013-10-25 22:33:23 +02:00
omap-secure.c RX-51: Add support for OMAP3 ROM Random Number Generator 2013-10-08 12:02:12 -07:00
omap-secure.h ARM: OMAP2+: Fix undefined reference to set_cntfreq 2013-11-18 15:33:16 -08:00
omap-smc.S ARM: OMAP3: Add secure function omap_smc3() which calling instruction smc #1 2013-10-08 11:55:32 -07:00
omap-smp.c ARM: OMAP4+: move errata initialization to omap4_pm_init_early 2014-01-31 14:57:37 -08:00
omap-wakeupgen.c ARM: OMAP4+: Correct Wakeup-gen code to use physical irq number 2014-02-05 20:08:34 +05:30
omap-wakeupgen.h ARM: OMAP2+: Make omap-wakeupgen.h local 2012-09-20 15:02:37 -07:00
omap2-restart.c reboot: arm: change reboot_mode to use enum reboot_mode 2013-07-09 10:33:29 -07:00
omap3-restart.c reboot: arm: change reboot_mode to use enum reboot_mode 2013-07-09 10:33:29 -07:00
omap4-common.c ARM: DRA: Enable Crossbar IP support for DRA7XX 2014-02-05 20:09:11 +05:30
omap4-keypad.h ARM: OMAP2+: Make omap4-keypad.h local 2012-09-20 15:04:04 -07:00
omap4-restart.c reboot: arm: change reboot_mode to use enum reboot_mode 2013-07-09 10:33:29 -07:00
omap4-sar-layout.h ARM: arm-soc cleanup for 3.10 2013-05-02 09:03:55 -07:00
omap24xx.h ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 2012-09-12 18:06:31 -07:00
omap34xx.h ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 2012-09-12 18:06:31 -07:00
omap44xx.h ARM: OMAP: Make use of available scu_a9_get_base() interface 2013-01-28 10:41:39 -07:00
omap54xx.h ARM: DRA7: Reuse io tables and add a new .init_early 2013-08-13 11:00:35 +05:30
omap_device.c Linux 3.13-rc5 2013-12-28 21:38:16 -08:00
omap_device.h ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected 2013-12-10 09:39:52 -08:00
omap_hwmod.c ARM: OMAP2+: hwmod: fix missing braces in _init() 2014-04-11 12:29:09 -06:00
omap_hwmod.h ARM: OMAP2+: hwmod: AM43x support 2013-10-13 22:48:46 -06:00
omap_hwmod_2xxx_3xxx_interconnect_data.c ARM: OMAP: Split plat/serial.h for omap1 and omap2+ 2012-10-24 13:34:31 -07:00
omap_hwmod_2xxx_3xxx_ipblock_data.c ARM: OMAP2+: Remove dma.h 2013-06-18 00:12:34 -07:00
omap_hwmod_2xxx_interconnect_data.c ARM: OMAP2+: Remove legacy hwmod entries for omap2 2013-11-25 15:31:18 -08:00
omap_hwmod_2xxx_ipblock_data.c ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data 2013-12-25 21:41:27 -07:00
omap_hwmod_3xxx_data.c ARM: OMAP3: hwmod data: Correct clock domains for USB modules 2014-04-11 11:51:22 -06:00
omap_hwmod_7xx_data.c ARM: DRA7: hwmod data: correct the sysc data for spinlock 2014-02-19 11:34:47 -07:00
omap_hwmod_33xx_43xx_common_data.h ARM: OMAP2+: hwmod: AM43x support 2013-10-13 22:48:46 -06:00
omap_hwmod_33xx_43xx_interconnect_data.c ARM: OMAP2+: hwmod: AM335x/AM43x: move common data 2013-10-13 22:47:39 -06:00
omap_hwmod_33xx_43xx_ipblock_data.c ARM: OMAP2+: hwmod: AM43x support 2013-10-13 22:48:46 -06:00
omap_hwmod_33xx_data.c ARM: OMAP2+: hwmod: AM335x: runtime register update 2013-10-13 22:47:56 -06:00
omap_hwmod_43xx_data.c ARM: AM43x: hwmod data: register spinlock OCP interface 2014-02-28 12:43:46 -07:00
omap_hwmod_44xx_data.c ARM: OMAP4: hwmod data: correct the idlemodes for spinlock 2014-03-13 14:09:57 -07:00
omap_hwmod_54xx_data.c ARM: OMAP5: hwmod data: add mmu data for ipu & dsp 2014-03-12 09:49:47 -07:00
omap_hwmod_2420_data.c ARM: OMAP2+: Remove legacy hwmod entries for omap2 2013-11-25 15:31:18 -08:00
omap_hwmod_2430_data.c ARM: OMAP2+: Remove legacy hwmod entries for omap2 2013-11-25 15:31:18 -08:00
omap_hwmod_common_data.c ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00
omap_hwmod_common_data.h ARM: OMAP2+: Remove legacy hwmod entries for omap2 2013-11-25 15:31:18 -08:00
omap_hwmod_reset.c ARM: omap2: include linux/errno.h in hwmod_reset 2013-02-15 13:36:47 +01:00
omap_opp_data.h Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock 2012-11-13 13:25:38 -08:00
omap_phy_internal.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
omap_twl.c ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER 2012-12-17 10:50:41 -08:00
opp.c ACPI and power management updates for 3.13-rc1 2013-11-14 13:41:48 +09:00
opp2xxx.h
…
opp3xxx_data.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
opp4xxx_data.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
opp2420_data.c ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ 2012-09-12 18:06:31 -07:00
opp2430_data.c ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ 2012-09-12 18:06:31 -07:00
pdata-quirks.c fbdev changes for 3.15 (OMAP) 2014-04-07 10:47:51 -07:00
pm-debug.c Merge branch 'cleanup' into for-linus 2013-05-02 21:31:29 +01:00
pm.c ACPI and power management updates for 3.13-rc1 2013-11-14 13:41:48 +09:00
pm.h ARM: OMAP4: Fix definition of IS_PM44XX_ERRATUM 2014-03-13 13:41:50 -07:00
pm24xx.c ARM: OMAP2: CM/PM: remove direct register accesses outside CM code 2013-10-19 10:11:51 -06:00
pm34xx.c ARM: OMAP3: PM: remove access to PRM_VOLTCTRL register 2014-04-10 11:01:09 -07:00
pm44xx.c ARM: OMAP4+: move errata initialization to omap4_pm_init_early 2014-01-31 14:57:37 -08:00
pmu.c ARM: OMAP2+: Cocci spatch "ptr_ret.spatch" 2013-07-04 05:10:51 -07:00
powerdomain-common.c
…
powerdomain.c ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm 2013-12-02 11:38:14 -08:00
powerdomain.h ARM: OMAP2+: PM: AM43x powerdomain data 2013-10-13 22:48:25 -06:00
powerdomains2xxx_3xxx_data.c ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments 2013-01-29 14:59:58 -07:00
powerdomains2xxx_3xxx_data.h
…
powerdomains2xxx_data.c ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments 2013-01-29 14:59:58 -07:00
powerdomains3xxx_data.c ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX 2013-08-23 04:48:42 -06:00
powerdomains7xx_data.c ARM: OMAP: DRA7: powerdomain: Add DRA7XX data and update header 2013-08-23 04:28:36 -06:00
powerdomains33xx_data.c ARM: OMAP AM33xx: powerdomains: add AM335x support 2012-06-18 12:08:06 -06:00
powerdomains43xx_data.c ARM: OMAP2+: PM: AM43x powerdomain data 2013-10-13 22:48:25 -06:00
powerdomains44xx_data.c
…
powerdomains54xx_data.c ARM: OMAP5: PRM/CM: Cleanup unused header 2013-07-21 22:10:25 -06:00
prcm-common.h ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX 2013-08-23 04:48:42 -06:00
prcm43xx.h ARM: OMAP2: hwmod: Add qspi data for am437x. 2013-10-15 23:49:43 -06:00
prcm44xx.h ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters 2013-08-23 04:28:36 -06:00
prcm_mpu7xx.h ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters 2013-08-23 04:28:36 -06:00
prcm_mpu44xx.c ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
prcm_mpu44xx.h ARM: OMAP4+: PRCM MPU: Move function prototypes to common header for re-use 2013-06-08 11:54:40 -06:00
prcm_mpu54xx.h ARM: OMAP5: PRCM: Add OMAP54XX local MPU PRCM registers 2013-06-08 11:55:18 -06:00
prcm_mpu_44xx_54xx.h ARM: OMAP4+: PRCM MPU: Move function prototypes to common header for re-use 2013-06-08 11:54:40 -06:00
prm-regbits-24xx.h ARM: OMAP2: PRM/CM: Cleanup unused header 2013-07-21 21:13:59 -06:00
prm-regbits-33xx.h ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK 2013-08-29 19:10:59 -07:00
prm-regbits-34xx.h ARM: OMAP3: PRM/CM: Cleanup unused header 2013-07-21 22:10:03 -06:00
prm-regbits-44xx.h ARM: OMAP4: PRM/CM: Cleanup unused header 2013-07-21 22:10:14 -06:00
prm.h ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT 2014-01-17 12:37:11 -08:00
prm2xxx.c Some OMAP PRCM and sparse fixes against v3.8-rc1. A basic set of test 2013-01-03 11:04:21 -08:00
prm2xxx.h ARM: OMAP2+: PRM: initialize some PRM functions early 2012-11-21 16:15:16 -07:00
prm2xxx_3xxx.c ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints 2013-01-29 14:59:58 -07:00
prm2xxx_3xxx.h ARM: OMAP3: clock: Add 3xxx data using common struct clk 2012-11-12 19:18:49 -07:00
prm3xxx.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
prm3xxx.h ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap 2013-10-10 15:46:30 -07:00
prm7xx.h ARM: OMAP: DRA7: PRM: Add DRA7XX register definitions 2013-08-23 04:04:23 -06:00
prm33xx.c ARM: AM33xx: Remove the unused voltagedomain data 2013-06-17 07:26:44 -07:00
prm33xx.h ARM: OMAP2+: AM33XX: Update the hardreset API 2013-02-08 07:25:28 -07:00
prm44xx.c ARM: OMAP: DRA7: Enable PM framework initializations 2013-08-23 04:29:37 -06:00
prm44xx.h ARM: OMAP4+: PRM: Move function prototypes to common header for re-use 2013-06-08 11:02:20 -06:00
prm44xx_54xx.h ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain 2013-11-18 11:03:37 -08:00
prm54xx.h ARM: OMAP5: PRM: Add OMAP54XX register and bitfield files 2013-06-08 11:41:01 -06:00
prm_common.c ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT 2014-01-17 12:37:11 -08:00
prminst44xx.c ARM: SoC specific changes 2014-04-05 14:19:54 -07:00
prminst44xx.h ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
scrm44xx.h ARM: OMAP4: clock: Add 44xx data using common struct clk 2012-11-12 19:10:20 -07:00
scrm54xx.h ARM: OMAP5: SCRM: Add OMAP54XX header file. 2013-06-08 11:55:44 -06:00
sdram-hynix-h8mbx00u0mer-0em.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdram-micron-mt46h32m32lf-6.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdram-nokia.c ARM: OMAP: remove plat/clock.h 2012-10-18 16:23:20 -07:00
sdram-nokia.h
…
sdram-numonyx-m65kxxxxam.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdram-qimonda-hyb18m512160af-6.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdrc.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
sdrc.h ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code 2012-11-08 12:33:07 -07:00
sdrc2xxx.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
serial.c ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL 2013-07-30 05:13:35 -06:00
serial.h ARM: OMAP2+: Fix relative includes for serial.h 2012-10-31 15:37:14 -07:00
sleep24xx.S ARM: OMAP2xxx: PM: enter WFI via inline asm if CORE stays active 2013-02-06 13:48:14 -07:00
sleep34xx.S omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
sleep44xx.S ARM: OMAP4: sleep: build OMAP4 specific functions only for OMAP4 2013-07-04 05:10:51 -07:00
smartreflex-class3.c PM / AVS: SmartReflex: use omap_sr * for enable/disable interface 2013-06-10 10:46:18 -07:00
soc.h ARM: OMAP2+: AM43x: Add ID for ES1.1 2014-02-28 15:33:26 -08:00
sr_device.c ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default 2013-02-12 09:00:33 -08:00
sram.c ARM: OMAP2+: AM43x: SRAM base and size 2013-06-12 08:07:23 -07:00
sram.h ARM: OMAP: Split sram.h to local headers and minimal shared header 2012-10-31 10:14:13 -07:00
sram34xx.S ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files 2012-10-21 01:01:11 -06:00
sram242x.S ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files 2012-10-21 01:01:11 -06:00
sram243x.S ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files 2012-10-21 01:01:11 -06:00
ti81xx.h ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code 2012-11-08 12:33:07 -07:00
timer.c ARM: OMAP2+: AM43x: Use gptimer as clocksource 2014-02-28 15:33:27 -08:00
twl-common.c arm: omap3: twl: add phy consumer data in twl4030_usb_data 2013-09-27 17:36:58 -07:00
twl-common.h ARM: OMAP2+: twl-common: Allow boards to customize the twl4030 audio setup 2013-01-22 10:34:50 +01:00
usb-host.c ARM: OMAP2+: usb-host: Adapt to USB phy-nop RESET line changes 2013-10-04 09:29:11 -05:00
usb-musb.c ARM: OMAP2: fix musb usage for n8x0 2013-08-16 09:39:56 -07:00
usb-tusb6010.c ARM: OMAP2+: Convert TUSB to use gpmc_cs_program_settings() 2013-04-01 14:53:43 -05:00
usb.h ARM: OMAP2+: omap-usb-host: Get rid of platform_data from struct usbhs_phy_data 2013-10-04 09:29:10 -05:00
vc.c Merge branch 'next/pm-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/pm 2012-11-30 09:12:33 -08:00
vc.h ARM: OMAP3: VC: calculate ramp times 2012-11-05 15:08:23 -08:00
vc3xxx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
vc44xx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
voltage.c ARM: OMAP: unwrap strings 2012-09-12 02:57:10 -06:00
voltage.h Merge branch 'omap/pm-voltdomain-cleanup' into next/soc 2013-06-20 17:35:16 +02:00
voltagedomains2xxx_data.c
…
voltagedomains3xxx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
voltagedomains44xx_data.c Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock 2012-11-13 13:25:38 -08:00
voltagedomains54xx_data.c ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data 2013-06-25 17:11:06 -07:00
vp.c OMAP voltage layer updates towards supporting auto-retention/auto-off 2012-11-06 17:06:37 -08:00
vp.h ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
vp3xxx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
vp44xx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
wd_timer.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
wd_timer.h ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00