1110 lines
32 KiB
Plaintext
1110 lines
32 KiB
Plaintext
#
|
|
# Generic video config states
|
|
#
|
|
|
|
config VIDEO_V4L2
|
|
tristate
|
|
depends on VIDEO_DEV && VIDEO_V4L2_COMMON
|
|
default VIDEO_DEV && VIDEO_V4L2_COMMON
|
|
|
|
config VIDEO_V4L1
|
|
tristate
|
|
depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
|
|
default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
|
|
|
|
config VIDEOBUF_GEN
|
|
tristate
|
|
|
|
config VIDEOBUF_DMA_SG
|
|
depends on HAS_DMA
|
|
select VIDEOBUF_GEN
|
|
tristate
|
|
|
|
config VIDEOBUF_VMALLOC
|
|
select VIDEOBUF_GEN
|
|
tristate
|
|
|
|
config VIDEOBUF_DMA_CONTIG
|
|
depends on HAS_DMA
|
|
select VIDEOBUF_GEN
|
|
tristate
|
|
|
|
config VIDEOBUF_DVB
|
|
tristate
|
|
select VIDEOBUF_GEN
|
|
|
|
config VIDEO_BTCX
|
|
depends on PCI
|
|
tristate
|
|
|
|
config VIDEO_TVEEPROM
|
|
tristate
|
|
depends on I2C
|
|
|
|
config VIDEO_TUNER
|
|
tristate
|
|
depends on MEDIA_TUNER
|
|
|
|
#
|
|
# Multimedia Video device configuration
|
|
#
|
|
|
|
menuconfig VIDEO_CAPTURE_DRIVERS
|
|
bool "Video capture adapters"
|
|
depends on VIDEO_V4L2
|
|
default y
|
|
---help---
|
|
Say Y here to enable selecting the video adapters for
|
|
webcams, analog TV, and hybrid analog/digital TV.
|
|
Some of those devices also supports FM radio.
|
|
|
|
if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
|
|
|
|
config VIDEO_ADV_DEBUG
|
|
bool "Enable advanced debug functionality"
|
|
default n
|
|
---help---
|
|
Say Y here to enable advanced debugging functionality on some
|
|
V4L devices.
|
|
In doubt, say N.
|
|
|
|
config VIDEO_FIXED_MINOR_RANGES
|
|
bool "Enable old-style fixed minor ranges for video devices"
|
|
default n
|
|
---help---
|
|
Say Y here to enable the old-style fixed-range minor assignments.
|
|
Only useful if you rely on the old behavior and use mknod instead of udev.
|
|
|
|
When in doubt, say N.
|
|
|
|
config VIDEO_HELPER_CHIPS_AUTO
|
|
bool "Autoselect pertinent encoders/decoders and other helper chips"
|
|
default y
|
|
---help---
|
|
Most video cards may require additional modules to encode or
|
|
decode audio/video standards. This option will autoselect
|
|
all pertinent modules to each selected video module.
|
|
|
|
Unselect this only if you know exactly what you are doing, since
|
|
it may break support on some boards.
|
|
|
|
In doubt, say Y.
|
|
|
|
config VIDEO_IR_I2C
|
|
tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
|
|
depends on I2C && VIDEO_IR
|
|
default y
|
|
---help---
|
|
Most boards have an IR chip directly connected via GPIO. However,
|
|
some video boards have the IR connected via I2C bus.
|
|
|
|
If your board doesn't have an I2C IR chip, you may disable this
|
|
option.
|
|
|
|
In doubt, say Y.
|
|
|
|
#
|
|
# Encoder / Decoder module configuration
|
|
#
|
|
|
|
menu "Encoders/decoders and other helper chips"
|
|
depends on !VIDEO_HELPER_CHIPS_AUTO
|
|
|
|
comment "Audio decoders"
|
|
|
|
config VIDEO_TVAUDIO
|
|
tristate "Simple audio decoder chips"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for several audio decoder chips found on some bt8xx boards:
|
|
Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
|
|
tea6320, tea6420, tda8425, ta8874z.
|
|
Microchip: pic16c54 based design on ProVideo PV951 board.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tvaudio.
|
|
|
|
config VIDEO_TDA7432
|
|
tristate "Philips TDA7432 audio processor"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for tda7432 audio decoder chip found on some bt8xx boards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tda7432.
|
|
|
|
config VIDEO_TDA9840
|
|
tristate "Philips TDA9840 audio processor"
|
|
depends on I2C
|
|
---help---
|
|
Support for tda9840 audio decoder chip found on some Zoran boards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tda9840.
|
|
|
|
config VIDEO_TDA9875
|
|
tristate "Philips TDA9875 audio processor"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for tda9875 audio decoder chip found on some bt8xx boards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tda9875.
|
|
|
|
config VIDEO_TEA6415C
|
|
tristate "Philips TEA6415C audio processor"
|
|
depends on I2C
|
|
---help---
|
|
Support for tea6415c audio decoder chip found on some bt8xx boards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tea6415c.
|
|
|
|
config VIDEO_TEA6420
|
|
tristate "Philips TEA6420 audio processor"
|
|
depends on I2C
|
|
---help---
|
|
Support for tea6420 audio decoder chip found on some bt8xx boards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tea6420.
|
|
|
|
config VIDEO_MSP3400
|
|
tristate "Micronas MSP34xx audio decoders"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Micronas MSP34xx series of audio decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called msp3400.
|
|
|
|
config VIDEO_CS5345
|
|
tristate "Cirrus Logic CS5345 audio ADC"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Cirrus Logic CS5345 24-bit, 192 kHz
|
|
stereo A/D converter.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cs5345.
|
|
|
|
config VIDEO_CS53L32A
|
|
tristate "Cirrus Logic CS53L32A audio ADC"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Cirrus Logic CS53L32A low voltage
|
|
stereo A/D converter.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cs53l32a.
|
|
|
|
config VIDEO_M52790
|
|
tristate "Mitsubishi M52790 A/V switch"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Mitsubishi M52790 A/V switch.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called m52790.
|
|
|
|
config VIDEO_TLV320AIC23B
|
|
tristate "Texas Instruments TLV320AIC23B audio codec"
|
|
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
|
|
---help---
|
|
Support for the Texas Instruments TLV320AIC23B audio codec.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tlv320aic23b.
|
|
|
|
config VIDEO_WM8775
|
|
tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Wolfson Microelectronics WM8775 high
|
|
performance stereo A/D Converter with a 4 channel input mixer.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called wm8775.
|
|
|
|
config VIDEO_WM8739
|
|
tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Wolfson Microelectronics WM8739
|
|
stereo A/D Converter.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called wm8739.
|
|
|
|
config VIDEO_VP27SMPX
|
|
tristate "Panasonic VP27s internal MPX"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the internal MPX of the Panasonic VP27s tuner.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called vp27smpx.
|
|
|
|
comment "RDS decoders"
|
|
|
|
config VIDEO_SAA6588
|
|
tristate "SAA6588 Radio Chip RDS decoder support"
|
|
depends on VIDEO_V4L2 && I2C
|
|
|
|
help
|
|
Support for this Radio Data System (RDS) decoder. This allows
|
|
seeing radio station identification transmitted using this
|
|
standard.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa6588.
|
|
|
|
comment "Video decoders"
|
|
|
|
config VIDEO_ADV7180
|
|
tristate "Analog Devices ADV7180 decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Analog Devices ADV7180 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7180.
|
|
|
|
config VIDEO_BT819
|
|
tristate "BT819A VideoStream decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for BT819A video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bt819.
|
|
|
|
config VIDEO_BT856
|
|
tristate "BT856 VideoStream decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for BT856 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bt856.
|
|
|
|
config VIDEO_BT866
|
|
tristate "BT866 VideoStream decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for BT866 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bt866.
|
|
|
|
config VIDEO_KS0127
|
|
tristate "KS0127 video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for KS0127 video decoder.
|
|
|
|
This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
|
|
cards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ks0127.
|
|
|
|
config VIDEO_OV7670
|
|
tristate "OmniVision OV7670 sensor support"
|
|
depends on I2C && VIDEO_V4L2
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the OmniVision
|
|
OV7670 VGA camera. It currently only works with the M88ALP01
|
|
controller.
|
|
|
|
config VIDEO_MT9V011
|
|
tristate "Micron mt9v011 sensor support"
|
|
depends on I2C && VIDEO_V4L2
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the Micron
|
|
mt0v011 1.3 Mpixel camera. It currently only works with the
|
|
em28xx driver.
|
|
|
|
config VIDEO_TCM825X
|
|
tristate "TCM825x camera sensor support"
|
|
depends on I2C && VIDEO_V4L2
|
|
---help---
|
|
This is a driver for the Toshiba TCM825x VGA camera sensor.
|
|
It is used for example in Nokia N800.
|
|
|
|
config VIDEO_SAA7110
|
|
tristate "Philips SAA7110 video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips SAA7110 video decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7110.
|
|
|
|
config VIDEO_SAA711X
|
|
tristate "Philips SAA7111/3/4/5 video decoders"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips SAA7111/3/4/5 video decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7115.
|
|
|
|
config VIDEO_SAA717X
|
|
tristate "Philips SAA7171/3/4 audio/video decoders"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips SAA7171/3/4 audio/video decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa717x.
|
|
|
|
config VIDEO_SAA7191
|
|
tristate "Philips SAA7191 video decoder"
|
|
depends on VIDEO_V4L1 && I2C
|
|
---help---
|
|
Support for the Philips SAA7191 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7191.
|
|
|
|
config VIDEO_TVP514X
|
|
tristate "Texas Instruments TVP514x video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
|
|
decoder. It is currently working with the TI OMAP3 camera
|
|
controller.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tvp514x.
|
|
|
|
config VIDEO_TVP5150
|
|
tristate "Texas Instruments TVP5150 video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Texas Instruments TVP5150 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tvp5150.
|
|
|
|
config VIDEO_TVP7002
|
|
tristate "Texas Instruments TVP7002 video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Texas Instruments TVP7002 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tvp7002.
|
|
|
|
config VIDEO_VPX3220
|
|
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for VPX322x video decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called vpx3220.
|
|
|
|
comment "Video and audio decoders"
|
|
|
|
source "drivers/media/video/cx25840/Kconfig"
|
|
|
|
comment "MPEG video encoders"
|
|
|
|
config VIDEO_CX2341X
|
|
tristate "Conexant CX2341x MPEG encoders"
|
|
depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON
|
|
---help---
|
|
Support for the Conexant CX23416 MPEG encoders
|
|
and CX23415 MPEG encoder/decoders.
|
|
|
|
This module currently supports the encoding functions only.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cx2341x.
|
|
|
|
comment "Video encoders"
|
|
|
|
config VIDEO_SAA7127
|
|
tristate "Philips SAA7127/9 digital video encoders"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips SAA7127/9 digital video encoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7127.
|
|
|
|
config VIDEO_SAA7185
|
|
tristate "Philips SAA7185 video encoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips SAA7185 video encoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7185.
|
|
|
|
config VIDEO_ADV7170
|
|
tristate "Analog Devices ADV7170 video encoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Analog Devices ADV7170 video encoder driver
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7170.
|
|
|
|
config VIDEO_ADV7175
|
|
tristate "Analog Devices ADV7175 video encoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Analog Devices ADV7175 video encoder driver
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7175.
|
|
|
|
config VIDEO_THS7303
|
|
tristate "THS7303 Video Amplifier"
|
|
depends on I2C
|
|
help
|
|
Support for TI THS7303 video amplifier
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ths7303.
|
|
|
|
config VIDEO_ADV7343
|
|
tristate "ADV7343 video encoder"
|
|
depends on I2C
|
|
help
|
|
Support for Analog Devices I2C bus based ADV7343 encoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7343.
|
|
|
|
comment "Video improvement chips"
|
|
|
|
config VIDEO_UPD64031A
|
|
tristate "NEC Electronics uPD64031A Ghost Reduction"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the NEC Electronics uPD64031A Ghost Reduction
|
|
video chip. It is most often found in NTSC TV cards made for
|
|
Japan and is used to reduce the 'ghosting' effect that can
|
|
be present in analog TV broadcasts.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called upd64031a.
|
|
|
|
config VIDEO_UPD64083
|
|
tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the NEC Electronics uPD64083 3-Dimensional Y/C
|
|
separation video chip. It is used to improve the quality of
|
|
the colors of a composite signal.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called upd64083.
|
|
|
|
endmenu # encoder / decoder chips
|
|
|
|
config DISPLAY_DAVINCI_DM646X_EVM
|
|
tristate "DM646x EVM Video Display"
|
|
depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
|
|
select VIDEOBUF_DMA_CONTIG
|
|
select VIDEO_DAVINCI_VPIF
|
|
select VIDEO_ADV7343
|
|
select VIDEO_THS7303
|
|
help
|
|
Support for DM6467 based display device.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called vpif_display.
|
|
|
|
config CAPTURE_DAVINCI_DM646X_EVM
|
|
tristate "DM646x EVM Video Capture"
|
|
depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
|
|
select VIDEOBUF_DMA_CONTIG
|
|
select VIDEO_DAVINCI_VPIF
|
|
help
|
|
Support for DM6467 based capture device.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called vpif_capture.
|
|
|
|
config VIDEO_DAVINCI_VPIF
|
|
tristate "DaVinci VPIF Driver"
|
|
depends on DISPLAY_DAVINCI_DM646X_EVM
|
|
help
|
|
Support for DaVinci VPIF Driver.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called vpif.
|
|
|
|
config VIDEO_VIVI
|
|
tristate "Virtual Video Driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
|
|
select VIDEOBUF_VMALLOC
|
|
default n
|
|
---help---
|
|
Enables a virtual video driver. This device shows a color bar
|
|
and a timestamp, as a real device would generate by using V4L2
|
|
api.
|
|
Say Y here if you want to test video apps or debug V4L devices.
|
|
In doubt, say N.
|
|
|
|
config VIDEO_VPSS_SYSTEM
|
|
tristate "VPSS System module driver"
|
|
depends on ARCH_DAVINCI
|
|
help
|
|
Support for vpss system module for video driver
|
|
|
|
config VIDEO_VPFE_CAPTURE
|
|
tristate "VPFE Video Capture Driver"
|
|
depends on VIDEO_V4L2 && ARCH_DAVINCI
|
|
select VIDEOBUF_DMA_CONTIG
|
|
help
|
|
Support for DMXXXX VPFE based frame grabber. This is the
|
|
common V4L2 module for following DMXXX SoCs from Texas
|
|
Instruments:- DM6446 & DM355.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called vpfe-capture.
|
|
|
|
config VIDEO_DM6446_CCDC
|
|
tristate "DM6446 CCDC HW module"
|
|
depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
|
|
select VIDEO_VPSS_SYSTEM
|
|
default y
|
|
help
|
|
Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
|
|
with decoder modules such as TVP5146 over BT656 or
|
|
sensor module such as MT9T001 over a raw interface. This
|
|
module configures the interface and CCDC/ISIF to do
|
|
video frame capture from slave decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called vpfe.
|
|
|
|
config VIDEO_DM355_CCDC
|
|
tristate "DM355 CCDC HW module"
|
|
depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
|
|
select VIDEO_VPSS_SYSTEM
|
|
default y
|
|
help
|
|
Enables DM355 CCD hw module. DM355 CCDC hw interfaces
|
|
with decoder modules such as TVP5146 over BT656 or
|
|
sensor module such as MT9T001 over a raw interface. This
|
|
module configures the interface and CCDC/ISIF to do
|
|
video frame capture from a slave decoders
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called vpfe.
|
|
|
|
config VIDEO_ISIF
|
|
tristate "ISIF HW module"
|
|
depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
|
|
select VIDEO_VPSS_SYSTEM
|
|
default y
|
|
help
|
|
Enables ISIF hw module. This is the hardware module for
|
|
configuring ISIF in VPFE to capture Raw Bayer RGB data from
|
|
a image sensor or YUV data from a YUV source.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called vpfe.
|
|
|
|
source "drivers/media/video/bt8xx/Kconfig"
|
|
|
|
config VIDEO_PMS
|
|
tristate "Mediavision Pro Movie Studio Video For Linux"
|
|
depends on ISA && VIDEO_V4L2
|
|
help
|
|
Say Y if you have such a thing.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called pms.
|
|
|
|
config VIDEO_BWQCAM
|
|
tristate "Quickcam BW Video For Linux"
|
|
depends on PARPORT && VIDEO_V4L1
|
|
help
|
|
Say Y have if you the black and white version of the QuickCam
|
|
camera. See the next option for the color version.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bw-qcam.
|
|
|
|
config VIDEO_CQCAM
|
|
tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
|
|
help
|
|
This is the video4linux driver for the colour version of the
|
|
Connectix QuickCam. If you have one of these cameras, say Y here,
|
|
otherwise say N. This driver does not work with the original
|
|
monochrome QuickCam, QuickCam VC or QuickClip. It is also available
|
|
as a module (c-qcam).
|
|
Read <file:Documentation/video4linux/CQcam.txt> for more information.
|
|
|
|
config VIDEO_W9966
|
|
tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
|
|
depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
|
|
help
|
|
Video4linux driver for Winbond's w9966 based Webcams.
|
|
Currently tested with the LifeView FlyCam Supra.
|
|
If you have one of these cameras, say Y here
|
|
otherwise say N.
|
|
This driver is also available as a module (w9966).
|
|
|
|
Check out <file:Documentation/video4linux/w9966.txt> for more
|
|
information.
|
|
|
|
config VIDEO_CPIA
|
|
tristate "CPiA Video For Linux (DEPRECATED)"
|
|
depends on VIDEO_V4L1
|
|
default n
|
|
---help---
|
|
This driver is DEPRECATED please use the gspca cpia1 module
|
|
instead. Note that you need atleast version 0.6.4 of libv4l for
|
|
the cpia1 gspca module.
|
|
|
|
This is the video4linux driver for cameras based on Vision's CPiA
|
|
(Colour Processor Interface ASIC), such as the Creative Labs Video
|
|
Blaster Webcam II. If you have one of these cameras, say Y here
|
|
and select parallel port and/or USB lowlevel support below,
|
|
otherwise say N. This will not work with the Creative Webcam III.
|
|
|
|
Please read <file:Documentation/video4linux/README.cpia> for more
|
|
information.
|
|
|
|
This driver is also available as a module (cpia).
|
|
|
|
config VIDEO_CPIA_PP
|
|
tristate "CPiA Parallel Port Lowlevel Support"
|
|
depends on PARPORT_1284 && VIDEO_CPIA && PARPORT
|
|
help
|
|
This is the lowlevel parallel port support for cameras based on
|
|
Vision's CPiA (Colour Processor Interface ASIC), such as the
|
|
Creative Webcam II. If you have the parallel port version of one
|
|
of these cameras, say Y here, otherwise say N. It is also available
|
|
as a module (cpia_pp).
|
|
|
|
config VIDEO_CPIA_USB
|
|
tristate "CPiA USB Lowlevel Support"
|
|
depends on VIDEO_CPIA && USB
|
|
help
|
|
This is the lowlevel USB support for cameras based on Vision's CPiA
|
|
(Colour Processor Interface ASIC), such as the Creative Webcam II.
|
|
If you have the USB version of one of these cameras, say Y here,
|
|
otherwise say N. This will not work with the Creative Webcam III.
|
|
It is also available as a module (cpia_usb).
|
|
|
|
source "drivers/media/video/cpia2/Kconfig"
|
|
|
|
config VIDEO_SAA5246A
|
|
tristate "SAA5246A, SAA5281 Teletext processor"
|
|
depends on I2C && VIDEO_V4L2
|
|
help
|
|
Support for I2C bus based teletext using the SAA5246A or SAA5281
|
|
chip. Useful only if you live in Europe.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa5246a.
|
|
|
|
config VIDEO_SAA5249
|
|
tristate "SAA5249 Teletext processor"
|
|
depends on I2C && VIDEO_V4L2
|
|
help
|
|
Support for I2C bus based teletext using the SAA5249 chip. At the
|
|
moment this is only useful on some European WinTV cards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa5249.
|
|
|
|
config VIDEO_VINO
|
|
tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
|
|
depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
|
|
select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
|
|
help
|
|
Say Y here to build in support for the Vino video input system found
|
|
on SGI Indy machines.
|
|
|
|
config VIDEO_STRADIS
|
|
tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
|
|
help
|
|
Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
|
|
driver for PCI. There is a product page at
|
|
<http://www.stradis.com/>.
|
|
|
|
source "drivers/media/video/zoran/Kconfig"
|
|
|
|
config VIDEO_MEYE
|
|
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
|
|
depends on PCI && SONY_LAPTOP && VIDEO_V4L1
|
|
---help---
|
|
This is the video4linux driver for the Motion Eye camera found
|
|
in the Vaio Picturebook laptops. Please read the material in
|
|
<file:Documentation/video4linux/meye.txt> for more information.
|
|
|
|
If you say Y or M here, you need to say Y or M to "Sony Laptop
|
|
Extras" in the misc device section.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called meye.
|
|
|
|
source "drivers/media/video/saa7134/Kconfig"
|
|
|
|
config VIDEO_MXB
|
|
tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
|
|
depends on PCI && VIDEO_V4L1 && I2C
|
|
select VIDEO_SAA7146_VV
|
|
select VIDEO_TUNER
|
|
select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
|
|
---help---
|
|
This is a video4linux driver for the 'Multimedia eXtension Board'
|
|
TV card by Siemens-Nixdorf.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called mxb.
|
|
|
|
config VIDEO_HEXIUM_ORION
|
|
tristate "Hexium HV-PCI6 and Orion frame grabber"
|
|
depends on PCI && VIDEO_V4L2 && I2C
|
|
select VIDEO_SAA7146_VV
|
|
---help---
|
|
This is a video4linux driver for the Hexium HV-PCI6 and
|
|
Orion frame grabber cards by Hexium.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called hexium_orion.
|
|
|
|
config VIDEO_HEXIUM_GEMINI
|
|
tristate "Hexium Gemini frame grabber"
|
|
depends on PCI && VIDEO_V4L2 && I2C
|
|
select VIDEO_SAA7146_VV
|
|
---help---
|
|
This is a video4linux driver for the Hexium Gemini frame
|
|
grabber card by Hexium. Please note that the Gemini Dual
|
|
card is *not* fully supported.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called hexium_gemini.
|
|
|
|
source "drivers/media/video/cx88/Kconfig"
|
|
|
|
source "drivers/media/video/cx23885/Kconfig"
|
|
|
|
source "drivers/media/video/au0828/Kconfig"
|
|
|
|
source "drivers/media/video/ivtv/Kconfig"
|
|
|
|
source "drivers/media/video/cx18/Kconfig"
|
|
|
|
source "drivers/media/video/saa7164/Kconfig"
|
|
|
|
config VIDEO_M32R_AR
|
|
tristate "AR devices"
|
|
depends on M32R && VIDEO_V4L1
|
|
---help---
|
|
This is a video4linux driver for the Renesas AR (Artificial Retina)
|
|
camera module.
|
|
|
|
config VIDEO_M32R_AR_M64278
|
|
tristate "AR device with color module M64278(VGA)"
|
|
depends on PLAT_M32700UT
|
|
select VIDEO_M32R_AR
|
|
---help---
|
|
This is a video4linux driver for the Renesas AR (Artificial
|
|
Retina) with M64278E-800 camera module.
|
|
This module supports VGA(640x480 pixels) resolutions.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called arv.
|
|
|
|
config VIDEO_CAFE_CCIC
|
|
tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
|
|
depends on PCI && I2C && VIDEO_V4L2
|
|
select VIDEO_OV7670
|
|
---help---
|
|
This is a video4linux2 driver for the Marvell 88ALP01 integrated
|
|
CMOS camera controller. This is the controller found on first-
|
|
generation OLPC systems.
|
|
|
|
config SOC_CAMERA
|
|
tristate "SoC camera support"
|
|
depends on VIDEO_V4L2 && HAS_DMA && I2C
|
|
select VIDEOBUF_GEN
|
|
help
|
|
SoC Camera is a common API to several cameras, not connecting
|
|
over a bus like PCI or USB. For example some i2c camera connected
|
|
directly to the data bus of an SoC.
|
|
|
|
config SOC_CAMERA_MT9M001
|
|
tristate "mt9m001 support"
|
|
depends on SOC_CAMERA && I2C
|
|
select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
|
|
help
|
|
This driver supports MT9M001 cameras from Micron, monochrome
|
|
and colour models.
|
|
|
|
config SOC_CAMERA_MT9M111
|
|
tristate "mt9m111 and mt9m112 support"
|
|
depends on SOC_CAMERA && I2C
|
|
help
|
|
This driver supports MT9M111 and MT9M112 cameras from Micron
|
|
|
|
config SOC_CAMERA_MT9T031
|
|
tristate "mt9t031 support"
|
|
depends on SOC_CAMERA && I2C
|
|
help
|
|
This driver supports MT9T031 cameras from Micron.
|
|
|
|
config SOC_CAMERA_MT9T112
|
|
tristate "mt9t112 support"
|
|
depends on SOC_CAMERA && I2C
|
|
help
|
|
This driver supports MT9T112 cameras from Aptina.
|
|
|
|
config SOC_CAMERA_MT9V022
|
|
tristate "mt9v022 support"
|
|
depends on SOC_CAMERA && I2C
|
|
select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
|
|
help
|
|
This driver supports MT9V022 cameras from Micron
|
|
|
|
config SOC_CAMERA_RJ54N1
|
|
tristate "rj54n1cb0c support"
|
|
depends on SOC_CAMERA && I2C
|
|
help
|
|
This is a rj54n1cb0c video driver
|
|
|
|
config SOC_CAMERA_TW9910
|
|
tristate "tw9910 support"
|
|
depends on SOC_CAMERA && I2C
|
|
help
|
|
This is a tw9910 video driver
|
|
|
|
config SOC_CAMERA_PLATFORM
|
|
tristate "platform camera support"
|
|
depends on SOC_CAMERA
|
|
help
|
|
This is a generic SoC camera platform driver, useful for testing
|
|
|
|
config SOC_CAMERA_OV772X
|
|
tristate "ov772x camera support"
|
|
depends on SOC_CAMERA && I2C
|
|
help
|
|
This is a ov772x camera driver
|
|
|
|
config SOC_CAMERA_OV9640
|
|
tristate "ov9640 camera support"
|
|
depends on SOC_CAMERA && I2C
|
|
help
|
|
This is a ov9640 camera driver
|
|
|
|
config MX1_VIDEO
|
|
bool
|
|
|
|
config VIDEO_MX1
|
|
tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
|
|
depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
|
|
select FIQ
|
|
select VIDEOBUF_DMA_CONTIG
|
|
select MX1_VIDEO
|
|
---help---
|
|
This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
|
|
|
|
config MX3_VIDEO
|
|
bool
|
|
|
|
config VIDEO_MX3
|
|
tristate "i.MX3x Camera Sensor Interface driver"
|
|
depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
|
|
select VIDEOBUF_DMA_CONTIG
|
|
select MX3_VIDEO
|
|
---help---
|
|
This is a v4l2 driver for the i.MX3x Camera Sensor Interface
|
|
|
|
config VIDEO_PXA27x
|
|
tristate "PXA27x Quick Capture Interface driver"
|
|
depends on VIDEO_DEV && PXA27x && SOC_CAMERA
|
|
select VIDEOBUF_DMA_SG
|
|
---help---
|
|
This is a v4l2 driver for the PXA27x Quick Capture Interface
|
|
|
|
config VIDEO_SH_MOBILE_CEU
|
|
tristate "SuperH Mobile CEU Interface driver"
|
|
depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
|
|
select VIDEOBUF_DMA_CONTIG
|
|
---help---
|
|
This is a v4l2 driver for the SuperH Mobile CEU Interface
|
|
|
|
config VIDEO_OMAP2
|
|
tristate "OMAP2 Camera Capture Interface driver"
|
|
depends on VIDEO_DEV && ARCH_OMAP2
|
|
select VIDEOBUF_DMA_SG
|
|
---help---
|
|
This is a v4l2 driver for the TI OMAP2 camera capture interface
|
|
|
|
#
|
|
# USB Multimedia device configuration
|
|
#
|
|
|
|
menuconfig V4L_USB_DRIVERS
|
|
bool "V4L USB devices"
|
|
depends on USB
|
|
default y
|
|
|
|
if V4L_USB_DRIVERS && USB
|
|
|
|
source "drivers/media/video/uvc/Kconfig"
|
|
|
|
source "drivers/media/video/gspca/Kconfig"
|
|
|
|
source "drivers/media/video/pvrusb2/Kconfig"
|
|
|
|
source "drivers/media/video/hdpvr/Kconfig"
|
|
|
|
source "drivers/media/video/em28xx/Kconfig"
|
|
|
|
source "drivers/media/video/tlg2300/Kconfig"
|
|
|
|
source "drivers/media/video/cx231xx/Kconfig"
|
|
|
|
source "drivers/media/video/usbvision/Kconfig"
|
|
|
|
source "drivers/media/video/usbvideo/Kconfig"
|
|
|
|
source "drivers/media/video/et61x251/Kconfig"
|
|
|
|
config VIDEO_OVCAMCHIP
|
|
tristate "OmniVision Camera Chip support (DEPRECATED)"
|
|
depends on I2C && VIDEO_V4L1
|
|
default n
|
|
---help---
|
|
This driver is DEPRECATED please use the gspca ov519 module
|
|
instead. Note that for the ov511 / ov518 support of the gspca module
|
|
you need atleast version 0.6.0 of libv4l and for the w9968cf
|
|
atleast version 0.6.3 of libv4l.
|
|
|
|
Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
|
|
This driver is intended to be used with the ov511 and w9968cf USB
|
|
camera drivers.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ovcamchip.
|
|
|
|
config USB_W9968CF
|
|
tristate "USB W996[87]CF JPEG Dual Mode Camera support (DEPRECATED)"
|
|
depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP
|
|
default n
|
|
---help---
|
|
This driver is DEPRECATED please use the gspca ov519 module
|
|
instead. Note that for the w9968cf support of the gspca module
|
|
you need atleast version 0.6.3 of libv4l.
|
|
|
|
Say Y here if you want support for cameras based on OV681 or
|
|
Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
|
|
|
|
This driver has an optional plugin, which is distributed as a
|
|
separate module only (released under GPL). It allows to use higher
|
|
resolutions and framerates, but cannot be included in the official
|
|
Linux kernel for performance purposes.
|
|
|
|
See <file:Documentation/video4linux/w9968cf.txt> for more info.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called w9968cf.
|
|
|
|
config USB_OV511
|
|
tristate "USB OV511 Camera support (DEPRECATED)"
|
|
depends on VIDEO_V4L1
|
|
default n
|
|
---help---
|
|
This driver is DEPRECATED please use the gspca ov519 module
|
|
instead. Note that for the ov511 / ov518 support of the gspca module
|
|
you need atleast version 0.6.0 of libv4l.
|
|
|
|
Say Y here if you want to connect this type of camera to your
|
|
computer's USB port. See <file:Documentation/video4linux/ov511.txt>
|
|
for more information and for a list of supported cameras.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ov511.
|
|
|
|
config USB_SE401
|
|
tristate "USB SE401 Camera support"
|
|
depends on VIDEO_V4L1
|
|
---help---
|
|
Say Y here if you want to connect this type of camera to your
|
|
computer's USB port. See <file:Documentation/video4linux/se401.txt>
|
|
for more information and for a list of supported cameras.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called se401.
|
|
|
|
source "drivers/media/video/sn9c102/Kconfig"
|
|
|
|
config USB_STV680
|
|
tristate "USB STV680 (Pencam) Camera support (DEPRECATED)"
|
|
depends on VIDEO_V4L1
|
|
default n
|
|
---help---
|
|
This driver is DEPRECATED please use the gspca stv0680 module
|
|
instead. Note that for the gspca stv0680 module you need
|
|
atleast version 0.6.3 of libv4l.
|
|
|
|
Say Y here if you want to connect this type of camera to your
|
|
computer's USB port. This includes the Pencam line of cameras.
|
|
See <file:Documentation/video4linux/stv680.txt> for more information
|
|
and for a list of supported cameras.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called stv680.
|
|
|
|
source "drivers/media/video/zc0301/Kconfig"
|
|
|
|
source "drivers/media/video/pwc/Kconfig"
|
|
|
|
config USB_ZR364XX
|
|
tristate "USB ZR364XX Camera support"
|
|
depends on VIDEO_V4L2
|
|
select VIDEOBUF_GEN
|
|
select VIDEOBUF_VMALLOC
|
|
---help---
|
|
Say Y here if you want to connect this type of camera to your
|
|
computer's USB port.
|
|
See <file:Documentation/video4linux/zr364xx.txt> for more info
|
|
and list of supported cameras.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called zr364xx.
|
|
|
|
config USB_STKWEBCAM
|
|
tristate "USB Syntek DC1125 Camera support"
|
|
depends on VIDEO_V4L2 && EXPERIMENTAL
|
|
---help---
|
|
Say Y here if you want to use this type of camera.
|
|
Supported devices are typically found in some Asus laptops,
|
|
with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
|
|
may be supported by the stk11xx driver, from which this is
|
|
derived, see http://stk11xx.sourceforge.net
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called stkwebcam.
|
|
|
|
config USB_S2255
|
|
tristate "USB Sensoray 2255 video capture device"
|
|
depends on VIDEO_V4L2
|
|
select VIDEOBUF_VMALLOC
|
|
default n
|
|
help
|
|
Say Y here if you want support for the Sensoray 2255 USB device.
|
|
This driver can be compiled as a module, called s2255drv.
|
|
|
|
endif # V4L_USB_DRIVERS
|
|
endif # VIDEO_CAPTURE_DRIVERS
|