OpenCloudOS-Kernel/arch/arm/mach-mvebu/pm-board.c

145 lines
3.2 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Board-level suspend/resume support.
*
* Copyright (C) 2014-2015 Marvell
*
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio/consumer.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/slab.h>
#include "common.h"
#define ARMADA_PIC_NR_GPIOS 3
static void __iomem *gpio_ctrl;
static struct gpio_desc *pic_gpios[ARMADA_PIC_NR_GPIOS];
static int pic_raw_gpios[ARMADA_PIC_NR_GPIOS];
static void mvebu_armada_pm_enter(void __iomem *sdram_reg, u32 srcmd)
{
u32 reg, ackcmd;
int i;
/* Put 001 as value on the GPIOs */
reg = readl(gpio_ctrl);
for (i = 0; i < ARMADA_PIC_NR_GPIOS; i++)
reg &= ~BIT(pic_raw_gpios[i]);
reg |= BIT(pic_raw_gpios[0]);
writel(reg, gpio_ctrl);
/* Prepare writing 111 to the GPIOs */
ackcmd = readl(gpio_ctrl);
for (i = 0; i < ARMADA_PIC_NR_GPIOS; i++)
ackcmd |= BIT(pic_raw_gpios[i]);
srcmd = cpu_to_le32(srcmd);
ackcmd = cpu_to_le32(ackcmd);
/*
* Wait a while, the PIC needs quite a bit of time between the
* two GPIO commands.
*/
mdelay(3000);
asm volatile (
/* Align to a cache line */
".balign 32\n\t"
/* Enter self refresh */
"str %[srcmd], [%[sdram_reg]]\n\t"
/*
* Wait 100 cycles for DDR to enter self refresh, by
* doing 50 times two instructions.
*/
"mov r1, #50\n\t"
"1: subs r1, r1, #1\n\t"
"bne 1b\n\t"
/* Issue the command ACK */
"str %[ackcmd], [%[gpio_ctrl]]\n\t"
/* Trap the processor */
"b .\n\t"
: : [srcmd] "r" (srcmd), [sdram_reg] "r" (sdram_reg),
[ackcmd] "r" (ackcmd), [gpio_ctrl] "r" (gpio_ctrl) : "r1");
}
static int __init mvebu_armada_pm_init(void)
{
struct device_node *np;
struct device_node *gpio_ctrl_np = NULL;
int ret = 0, i;
if (!of_machine_is_compatible("marvell,axp-gp"))
return -ENODEV;
np = of_find_node_by_name(NULL, "pm_pic");
if (!np)
return -ENODEV;
for (i = 0; i < ARMADA_PIC_NR_GPIOS; i++) {
char *name;
struct of_phandle_args args;
name = kasprintf(GFP_KERNEL, "pic-pin%d", i);
if (!name) {
ret = -ENOMEM;
goto out;
}
pic_gpios[i] = fwnode_gpiod_get_index(of_fwnode_handle(np),
"ctrl", i, GPIOD_OUT_HIGH,
name);
ret = PTR_ERR_OR_ZERO(pic_gpios[i]);
if (ret) {
kfree(name);
goto out;
}
ret = of_parse_phandle_with_fixed_args(np, "ctrl-gpios", 2,
i, &args);
if (ret < 0) {
gpiod_put(pic_gpios[i]);
kfree(name);
goto out;
}
if (gpio_ctrl_np)
of_node_put(gpio_ctrl_np);
gpio_ctrl_np = args.np;
pic_raw_gpios[i] = args.args[0];
}
gpio_ctrl = of_iomap(gpio_ctrl_np, 0);
if (!gpio_ctrl) {
ret = -ENOMEM;
goto out;
}
mvebu_pm_suspend_init(mvebu_armada_pm_enter);
out:
of_node_put(np);
of_node_put(gpio_ctrl_np);
return ret;
}
/*
* Registering the mvebu_board_pm_enter callback must be done before
* the platform_suspend_ops will be registered. In the same time we
* also need to have the gpio devices registered. That's why we use a
* device_initcall_sync which is called after all the device_initcall
* (used by the gpio device) but before the late_initcall (used to
* register the platform_suspend_ops)
*/
device_initcall_sync(mvebu_armada_pm_init);