344 lines
8.6 KiB
C
344 lines
8.6 KiB
C
/*
|
|
* BCM2835 master mode driver
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define BCM2835_I2C_C 0x0
|
|
#define BCM2835_I2C_S 0x4
|
|
#define BCM2835_I2C_DLEN 0x8
|
|
#define BCM2835_I2C_A 0xc
|
|
#define BCM2835_I2C_FIFO 0x10
|
|
#define BCM2835_I2C_DIV 0x14
|
|
#define BCM2835_I2C_DEL 0x18
|
|
#define BCM2835_I2C_CLKT 0x1c
|
|
|
|
#define BCM2835_I2C_C_READ BIT(0)
|
|
#define BCM2835_I2C_C_CLEAR BIT(4) /* bits 4 and 5 both clear */
|
|
#define BCM2835_I2C_C_ST BIT(7)
|
|
#define BCM2835_I2C_C_INTD BIT(8)
|
|
#define BCM2835_I2C_C_INTT BIT(9)
|
|
#define BCM2835_I2C_C_INTR BIT(10)
|
|
#define BCM2835_I2C_C_I2CEN BIT(15)
|
|
|
|
#define BCM2835_I2C_S_TA BIT(0)
|
|
#define BCM2835_I2C_S_DONE BIT(1)
|
|
#define BCM2835_I2C_S_TXW BIT(2)
|
|
#define BCM2835_I2C_S_RXR BIT(3)
|
|
#define BCM2835_I2C_S_TXD BIT(4)
|
|
#define BCM2835_I2C_S_RXD BIT(5)
|
|
#define BCM2835_I2C_S_TXE BIT(6)
|
|
#define BCM2835_I2C_S_RXF BIT(7)
|
|
#define BCM2835_I2C_S_ERR BIT(8)
|
|
#define BCM2835_I2C_S_CLKT BIT(9)
|
|
#define BCM2835_I2C_S_LEN BIT(10) /* Fake bit for SW error reporting */
|
|
|
|
#define BCM2835_I2C_TIMEOUT (msecs_to_jiffies(1000))
|
|
|
|
struct bcm2835_i2c_dev {
|
|
struct device *dev;
|
|
void __iomem *regs;
|
|
struct clk *clk;
|
|
int irq;
|
|
struct i2c_adapter adapter;
|
|
struct completion completion;
|
|
u32 msg_err;
|
|
u8 *msg_buf;
|
|
size_t msg_buf_remaining;
|
|
};
|
|
|
|
static inline void bcm2835_i2c_writel(struct bcm2835_i2c_dev *i2c_dev,
|
|
u32 reg, u32 val)
|
|
{
|
|
writel(val, i2c_dev->regs + reg);
|
|
}
|
|
|
|
static inline u32 bcm2835_i2c_readl(struct bcm2835_i2c_dev *i2c_dev, u32 reg)
|
|
{
|
|
return readl(i2c_dev->regs + reg);
|
|
}
|
|
|
|
static void bcm2835_fill_txfifo(struct bcm2835_i2c_dev *i2c_dev)
|
|
{
|
|
u32 val;
|
|
|
|
while (i2c_dev->msg_buf_remaining) {
|
|
val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S);
|
|
if (!(val & BCM2835_I2C_S_TXD))
|
|
break;
|
|
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_FIFO,
|
|
*i2c_dev->msg_buf);
|
|
i2c_dev->msg_buf++;
|
|
i2c_dev->msg_buf_remaining--;
|
|
}
|
|
}
|
|
|
|
static void bcm2835_drain_rxfifo(struct bcm2835_i2c_dev *i2c_dev)
|
|
{
|
|
u32 val;
|
|
|
|
while (i2c_dev->msg_buf_remaining) {
|
|
val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S);
|
|
if (!(val & BCM2835_I2C_S_RXD))
|
|
break;
|
|
*i2c_dev->msg_buf = bcm2835_i2c_readl(i2c_dev,
|
|
BCM2835_I2C_FIFO);
|
|
i2c_dev->msg_buf++;
|
|
i2c_dev->msg_buf_remaining--;
|
|
}
|
|
}
|
|
|
|
static irqreturn_t bcm2835_i2c_isr(int this_irq, void *data)
|
|
{
|
|
struct bcm2835_i2c_dev *i2c_dev = data;
|
|
u32 val, err;
|
|
|
|
val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S);
|
|
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_S, val);
|
|
|
|
err = val & (BCM2835_I2C_S_CLKT | BCM2835_I2C_S_ERR);
|
|
if (err) {
|
|
i2c_dev->msg_err = err;
|
|
complete(&i2c_dev->completion);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (val & BCM2835_I2C_S_RXD) {
|
|
bcm2835_drain_rxfifo(i2c_dev);
|
|
if (!(val & BCM2835_I2C_S_DONE))
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (val & BCM2835_I2C_S_DONE) {
|
|
if (i2c_dev->msg_buf_remaining)
|
|
i2c_dev->msg_err = BCM2835_I2C_S_LEN;
|
|
else
|
|
i2c_dev->msg_err = 0;
|
|
complete(&i2c_dev->completion);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (val & BCM2835_I2C_S_TXD) {
|
|
bcm2835_fill_txfifo(i2c_dev);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev,
|
|
struct i2c_msg *msg)
|
|
{
|
|
u32 c;
|
|
int time_left;
|
|
|
|
i2c_dev->msg_buf = msg->buf;
|
|
i2c_dev->msg_buf_remaining = msg->len;
|
|
reinit_completion(&i2c_dev->completion);
|
|
|
|
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR);
|
|
|
|
if (msg->flags & I2C_M_RD) {
|
|
c = BCM2835_I2C_C_READ | BCM2835_I2C_C_INTR;
|
|
} else {
|
|
c = BCM2835_I2C_C_INTT;
|
|
bcm2835_fill_txfifo(i2c_dev);
|
|
}
|
|
c |= BCM2835_I2C_C_ST | BCM2835_I2C_C_INTD | BCM2835_I2C_C_I2CEN;
|
|
|
|
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_A, msg->addr);
|
|
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DLEN, msg->len);
|
|
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c);
|
|
|
|
time_left = wait_for_completion_timeout(&i2c_dev->completion,
|
|
BCM2835_I2C_TIMEOUT);
|
|
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR);
|
|
if (!time_left) {
|
|
dev_err(i2c_dev->dev, "i2c transfer timed out\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
if (likely(!i2c_dev->msg_err))
|
|
return 0;
|
|
|
|
if ((i2c_dev->msg_err & BCM2835_I2C_S_ERR) &&
|
|
(msg->flags & I2C_M_IGNORE_NAK))
|
|
return 0;
|
|
|
|
dev_err(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err);
|
|
|
|
if (i2c_dev->msg_err & BCM2835_I2C_S_ERR)
|
|
return -EREMOTEIO;
|
|
else
|
|
return -EIO;
|
|
}
|
|
|
|
static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
|
|
int num)
|
|
{
|
|
struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
|
|
int i;
|
|
int ret = 0;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
ret = bcm2835_i2c_xfer_msg(i2c_dev, &msgs[i]);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
return ret ?: i;
|
|
}
|
|
|
|
static u32 bcm2835_i2c_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static const struct i2c_algorithm bcm2835_i2c_algo = {
|
|
.master_xfer = bcm2835_i2c_xfer,
|
|
.functionality = bcm2835_i2c_func,
|
|
};
|
|
|
|
static int bcm2835_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct bcm2835_i2c_dev *i2c_dev;
|
|
struct resource *mem, *requested, *irq;
|
|
u32 bus_clk_rate, divider;
|
|
int ret;
|
|
struct i2c_adapter *adap;
|
|
|
|
i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
|
|
if (!i2c_dev) {
|
|
dev_err(&pdev->dev, "Cannot allocate i2c_dev\n");
|
|
return -ENOMEM;
|
|
}
|
|
platform_set_drvdata(pdev, i2c_dev);
|
|
i2c_dev->dev = &pdev->dev;
|
|
init_completion(&i2c_dev->completion);
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!mem) {
|
|
dev_err(&pdev->dev, "No mem resource\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
requested = devm_request_mem_region(&pdev->dev, mem->start,
|
|
resource_size(mem),
|
|
dev_name(&pdev->dev));
|
|
if (!requested) {
|
|
dev_err(&pdev->dev, "Could not claim register region\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
i2c_dev->regs = devm_ioremap(&pdev->dev, mem->start,
|
|
resource_size(mem));
|
|
if (!i2c_dev->regs) {
|
|
dev_err(&pdev->dev, "Could not map registers\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(i2c_dev->clk)) {
|
|
dev_err(&pdev->dev, "Could not get clock\n");
|
|
return PTR_ERR(i2c_dev->clk);
|
|
}
|
|
|
|
ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
|
|
&bus_clk_rate);
|
|
if (ret < 0) {
|
|
dev_warn(&pdev->dev,
|
|
"Could not read clock-frequency property\n");
|
|
bus_clk_rate = 100000;
|
|
}
|
|
|
|
divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk), bus_clk_rate);
|
|
/*
|
|
* Per the datasheet, the register is always interpreted as an even
|
|
* number, by rounding down. In other words, the LSB is ignored. So,
|
|
* if the LSB is set, increment the divider to avoid any issue.
|
|
*/
|
|
if (divider & 1)
|
|
divider++;
|
|
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider);
|
|
|
|
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
if (!irq) {
|
|
dev_err(&pdev->dev, "No IRQ resource\n");
|
|
return -ENODEV;
|
|
}
|
|
i2c_dev->irq = irq->start;
|
|
|
|
ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED,
|
|
dev_name(&pdev->dev), i2c_dev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Could not request IRQ\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
adap = &i2c_dev->adapter;
|
|
i2c_set_adapdata(adap, i2c_dev);
|
|
adap->owner = THIS_MODULE;
|
|
adap->class = I2C_CLASS_HWMON;
|
|
strlcpy(adap->name, "bcm2835 I2C adapter", sizeof(adap->name));
|
|
adap->algo = &bcm2835_i2c_algo;
|
|
adap->dev.parent = &pdev->dev;
|
|
adap->dev.of_node = pdev->dev.of_node;
|
|
|
|
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, 0);
|
|
|
|
ret = i2c_add_adapter(adap);
|
|
if (ret)
|
|
free_irq(i2c_dev->irq, i2c_dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bcm2835_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct bcm2835_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
|
|
|
|
free_irq(i2c_dev->irq, i2c_dev);
|
|
i2c_del_adapter(&i2c_dev->adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id bcm2835_i2c_of_match[] = {
|
|
{ .compatible = "brcm,bcm2835-i2c" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, bcm2835_i2c_of_match);
|
|
|
|
static struct platform_driver bcm2835_i2c_driver = {
|
|
.probe = bcm2835_i2c_probe,
|
|
.remove = bcm2835_i2c_remove,
|
|
.driver = {
|
|
.name = "i2c-bcm2835",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = bcm2835_i2c_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(bcm2835_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Stephen Warren <swarren@wwwdotorg.org>");
|
|
MODULE_DESCRIPTION("BCM2835 I2C bus adapter");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:i2c-bcm2835");
|