204 lines
4.6 KiB
C
204 lines
4.6 KiB
C
/*
|
|
* Copyright (c) 2013 Linaro Ltd.
|
|
* Copyright (c) 2013 Hisilicon Limited.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/dw_mmc.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include "dw_mmc.h"
|
|
#include "dw_mmc-pltfm.h"
|
|
|
|
/*
|
|
* hi6220 sd only support io voltage 1.8v and 3v
|
|
* Also need config AO_SCTRL_SEL18 accordingly
|
|
*/
|
|
#define AO_SCTRL_SEL18 BIT(10)
|
|
#define AO_SCTRL_CTRL3 0x40C
|
|
|
|
struct k3_priv {
|
|
struct regmap *reg;
|
|
};
|
|
|
|
static unsigned long dw_mci_hi6220_caps[] = {
|
|
MMC_CAP_CMD23,
|
|
MMC_CAP_CMD23,
|
|
0
|
|
};
|
|
|
|
static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios)
|
|
{
|
|
int ret;
|
|
|
|
ret = clk_set_rate(host->ciu_clk, ios->clock);
|
|
if (ret)
|
|
dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock);
|
|
|
|
host->bus_hz = clk_get_rate(host->ciu_clk);
|
|
}
|
|
|
|
static const struct dw_mci_drv_data k3_drv_data = {
|
|
.set_ios = dw_mci_k3_set_ios,
|
|
};
|
|
|
|
static int dw_mci_hi6220_parse_dt(struct dw_mci *host)
|
|
{
|
|
struct k3_priv *priv;
|
|
|
|
priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->reg = syscon_regmap_lookup_by_phandle(host->dev->of_node,
|
|
"hisilicon,peripheral-syscon");
|
|
if (IS_ERR(priv->reg))
|
|
priv->reg = NULL;
|
|
|
|
host->priv = priv;
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mci_hi6220_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct k3_priv *priv;
|
|
struct dw_mci *host;
|
|
int min_uv, max_uv;
|
|
int ret;
|
|
|
|
host = slot->host;
|
|
priv = host->priv;
|
|
|
|
if (!priv || !priv->reg)
|
|
return 0;
|
|
|
|
if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
|
|
ret = regmap_update_bits(priv->reg, AO_SCTRL_CTRL3,
|
|
AO_SCTRL_SEL18, 0);
|
|
min_uv = 3000000;
|
|
max_uv = 3000000;
|
|
} else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
|
|
ret = regmap_update_bits(priv->reg, AO_SCTRL_CTRL3,
|
|
AO_SCTRL_SEL18, AO_SCTRL_SEL18);
|
|
min_uv = 1800000;
|
|
max_uv = 1800000;
|
|
} else {
|
|
dev_dbg(host->dev, "voltage not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (ret) {
|
|
dev_dbg(host->dev, "switch voltage failed\n");
|
|
return ret;
|
|
}
|
|
|
|
if (IS_ERR_OR_NULL(mmc->supply.vqmmc))
|
|
return 0;
|
|
|
|
ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
|
|
if (ret) {
|
|
dev_dbg(host->dev, "Regulator set error %d: %d - %d\n",
|
|
ret, min_uv, max_uv);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dw_mci_hi6220_set_ios(struct dw_mci *host, struct mmc_ios *ios)
|
|
{
|
|
int ret;
|
|
unsigned int clock;
|
|
|
|
clock = (ios->clock <= 25000000) ? 25000000 : ios->clock;
|
|
|
|
ret = clk_set_rate(host->biu_clk, clock);
|
|
if (ret)
|
|
dev_warn(host->dev, "failed to set rate %uHz\n", clock);
|
|
|
|
host->bus_hz = clk_get_rate(host->biu_clk);
|
|
}
|
|
|
|
static const struct dw_mci_drv_data hi6220_data = {
|
|
.caps = dw_mci_hi6220_caps,
|
|
.switch_voltage = dw_mci_hi6220_switch_voltage,
|
|
.set_ios = dw_mci_hi6220_set_ios,
|
|
.parse_dt = dw_mci_hi6220_parse_dt,
|
|
};
|
|
|
|
static const struct of_device_id dw_mci_k3_match[] = {
|
|
{ .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, },
|
|
{ .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, dw_mci_k3_match);
|
|
|
|
static int dw_mci_k3_probe(struct platform_device *pdev)
|
|
{
|
|
const struct dw_mci_drv_data *drv_data;
|
|
const struct of_device_id *match;
|
|
|
|
match = of_match_node(dw_mci_k3_match, pdev->dev.of_node);
|
|
drv_data = match->data;
|
|
|
|
return dw_mci_pltfm_register(pdev, drv_data);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int dw_mci_k3_suspend(struct device *dev)
|
|
{
|
|
struct dw_mci *host = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = dw_mci_suspend(host);
|
|
if (!ret)
|
|
clk_disable_unprepare(host->ciu_clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dw_mci_k3_resume(struct device *dev)
|
|
{
|
|
struct dw_mci *host = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(host->ciu_clk);
|
|
if (ret) {
|
|
dev_err(host->dev, "failed to enable ciu clock\n");
|
|
return ret;
|
|
}
|
|
|
|
return dw_mci_resume(host);
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static SIMPLE_DEV_PM_OPS(dw_mci_k3_pmops, dw_mci_k3_suspend, dw_mci_k3_resume);
|
|
|
|
static struct platform_driver dw_mci_k3_pltfm_driver = {
|
|
.probe = dw_mci_k3_probe,
|
|
.remove = dw_mci_pltfm_remove,
|
|
.driver = {
|
|
.name = "dwmmc_k3",
|
|
.of_match_table = dw_mci_k3_match,
|
|
.pm = &dw_mci_k3_pmops,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(dw_mci_k3_pltfm_driver);
|
|
|
|
MODULE_DESCRIPTION("K3 Specific DW-MSHC Driver Extension");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:dwmmc_k3");
|