OpenCloudOS-Kernel/drivers/pinctrl/intel/pinctrl-intel.h

135 lines
4.0 KiB
C

/*
* Core pinctrl/GPIO driver for Intel GPIO controllers
*
* Copyright (C) 2015, Intel Corporation
* Authors: Mathias Nyman <mathias.nyman@linux.intel.com>
* Mika Westerberg <mika.westerberg@linux.intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef PINCTRL_INTEL_H
#define PINCTRL_INTEL_H
struct pinctrl_pin_desc;
struct platform_device;
struct device;
/**
* struct intel_pingroup - Description about group of pins
* @name: Name of the groups
* @pins: All pins in this group
* @npins: Number of pins in this groups
* @mode: Native mode in which the group is muxed out @pins
*/
struct intel_pingroup {
const char *name;
const unsigned *pins;
size_t npins;
unsigned short mode;
};
/**
* struct intel_function - Description about a function
* @name: Name of the function
* @groups: An array of groups for this function
* @ngroups: Number of groups in @groups
*/
struct intel_function {
const char *name;
const char * const *groups;
size_t ngroups;
};
/**
* struct intel_community - Intel pin community description
* @barno: MMIO BAR number where registers for this community reside
* @padown_offset: Register offset of PAD_OWN register from @regs. If %0
* then there is no support for owner.
* @padcfglock_offset: Register offset of PADCFGLOCK from @regs. If %0 then
* locking is not supported.
* @hostown_offset: Register offset of HOSTSW_OWN from @regs. If %0 then it
* is assumed that the host owns the pin (rather than
* ACPI).
* @ie_offset: Register offset of GPI_IE from @regs.
* @pin_base: Starting pin of pins in this community
* @gpp_size: Maximum number of pads in each group, such as PADCFGLOCK,
* HOSTSW_OWN, GPI_IS, GPI_IE, etc.
* @npins: Number of pins in this community
* @features: Additional features supported by the hardware
* @regs: Community specific common registers (reserved for core driver)
* @pad_regs: Community specific pad registers (reserved for core driver)
* @ngpps: Number of groups (hw groups) in this community (reserved for
* core driver)
*/
struct intel_community {
unsigned barno;
unsigned padown_offset;
unsigned padcfglock_offset;
unsigned hostown_offset;
unsigned ie_offset;
unsigned pin_base;
unsigned gpp_size;
size_t npins;
unsigned features;
void __iomem *regs;
void __iomem *pad_regs;
size_t ngpps;
};
/* Additional features supported by the hardware */
#define PINCTRL_FEATURE_DEBOUNCE BIT(0)
#define PIN_GROUP(n, p, m) \
{ \
.name = (n), \
.pins = (p), \
.npins = ARRAY_SIZE((p)), \
.mode = (m), \
}
#define FUNCTION(n, g) \
{ \
.name = (n), \
.groups = (g), \
.ngroups = ARRAY_SIZE((g)), \
}
/**
* struct intel_pinctrl_soc_data - Intel pin controller per-SoC configuration
* @uid: ACPI _UID for the probe driver use if needed
* @pins: Array if pins this pinctrl controls
* @npins: Number of pins in the array
* @groups: Array of pin groups
* @ngroups: Number of groups in the array
* @functions: Array of functions
* @nfunctions: Number of functions in the array
* @communities: Array of communities this pinctrl handles
* @ncommunities: Number of communities in the array
*
* The @communities is used as a template by the core driver. It will make
* copy of all communities and fill in rest of the information.
*/
struct intel_pinctrl_soc_data {
const char *uid;
const struct pinctrl_pin_desc *pins;
size_t npins;
const struct intel_pingroup *groups;
size_t ngroups;
const struct intel_function *functions;
size_t nfunctions;
const struct intel_community *communities;
size_t ncommunities;
};
int intel_pinctrl_probe(struct platform_device *pdev,
const struct intel_pinctrl_soc_data *soc_data);
#ifdef CONFIG_PM_SLEEP
int intel_pinctrl_suspend(struct device *dev);
int intel_pinctrl_resume(struct device *dev);
#endif
#endif /* PINCTRL_INTEL_H */