217 lines
5.2 KiB
C
217 lines
5.2 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/**
|
|
* cdns3-imx.c - NXP i.MX specific Glue layer for Cadence USB Controller
|
|
*
|
|
* Copyright (C) 2019 NXP
|
|
*/
|
|
|
|
#include <linux/bits.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/iopoll.h>
|
|
|
|
#define USB3_CORE_CTRL1 0x00
|
|
#define USB3_CORE_CTRL2 0x04
|
|
#define USB3_INT_REG 0x08
|
|
#define USB3_CORE_STATUS 0x0c
|
|
#define XHCI_DEBUG_LINK_ST 0x10
|
|
#define XHCI_DEBUG_BUS 0x14
|
|
#define USB3_SSPHY_CTRL1 0x40
|
|
#define USB3_SSPHY_CTRL2 0x44
|
|
#define USB3_SSPHY_STATUS 0x4c
|
|
#define USB2_PHY_CTRL1 0x50
|
|
#define USB2_PHY_CTRL2 0x54
|
|
#define USB2_PHY_STATUS 0x5c
|
|
|
|
/* Register bits definition */
|
|
|
|
/* USB3_CORE_CTRL1 */
|
|
#define SW_RESET_MASK (0x3f << 26)
|
|
#define PWR_SW_RESET BIT(31)
|
|
#define APB_SW_RESET BIT(30)
|
|
#define AXI_SW_RESET BIT(29)
|
|
#define RW_SW_RESET BIT(28)
|
|
#define PHY_SW_RESET BIT(27)
|
|
#define PHYAHB_SW_RESET BIT(26)
|
|
#define ALL_SW_RESET (PWR_SW_RESET | APB_SW_RESET | AXI_SW_RESET | \
|
|
RW_SW_RESET | PHY_SW_RESET | PHYAHB_SW_RESET)
|
|
#define OC_DISABLE BIT(9)
|
|
#define MDCTRL_CLK_SEL BIT(7)
|
|
#define MODE_STRAP_MASK (0x7)
|
|
#define DEV_MODE (1 << 2)
|
|
#define HOST_MODE (1 << 1)
|
|
#define OTG_MODE (1 << 0)
|
|
|
|
/* USB3_INT_REG */
|
|
#define CLK_125_REQ BIT(29)
|
|
#define LPM_CLK_REQ BIT(28)
|
|
#define DEVU3_WAEKUP_EN BIT(14)
|
|
#define OTG_WAKEUP_EN BIT(12)
|
|
#define DEV_INT_EN (3 << 8) /* DEV INT b9:8 */
|
|
#define HOST_INT1_EN (1 << 0) /* HOST INT b7:0 */
|
|
|
|
/* USB3_CORE_STATUS */
|
|
#define MDCTRL_CLK_STATUS BIT(15)
|
|
#define DEV_POWER_ON_READY BIT(13)
|
|
#define HOST_POWER_ON_READY BIT(12)
|
|
|
|
/* USB3_SSPHY_STATUS */
|
|
#define CLK_VALID_MASK (0x3f << 26)
|
|
#define CLK_VALID_COMPARE_BITS (0xf << 28)
|
|
#define PHY_REFCLK_REQ (1 << 0)
|
|
|
|
struct cdns_imx {
|
|
struct device *dev;
|
|
void __iomem *noncore;
|
|
struct clk_bulk_data *clks;
|
|
int num_clks;
|
|
};
|
|
|
|
static inline u32 cdns_imx_readl(struct cdns_imx *data, u32 offset)
|
|
{
|
|
return readl(data->noncore + offset);
|
|
}
|
|
|
|
static inline void cdns_imx_writel(struct cdns_imx *data, u32 offset, u32 value)
|
|
{
|
|
writel(value, data->noncore + offset);
|
|
}
|
|
|
|
static const struct clk_bulk_data imx_cdns3_core_clks[] = {
|
|
{ .id = "usb3_lpm_clk" },
|
|
{ .id = "usb3_bus_clk" },
|
|
{ .id = "usb3_aclk" },
|
|
{ .id = "usb3_ipg_clk" },
|
|
{ .id = "usb3_core_pclk" },
|
|
};
|
|
|
|
static int cdns_imx_noncore_init(struct cdns_imx *data)
|
|
{
|
|
u32 value;
|
|
int ret;
|
|
struct device *dev = data->dev;
|
|
|
|
cdns_imx_writel(data, USB3_SSPHY_STATUS, CLK_VALID_MASK);
|
|
udelay(1);
|
|
ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value,
|
|
(value & CLK_VALID_COMPARE_BITS) == CLK_VALID_COMPARE_BITS,
|
|
10, 100000);
|
|
if (ret) {
|
|
dev_err(dev, "wait clkvld timeout\n");
|
|
return ret;
|
|
}
|
|
|
|
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
|
|
value |= ALL_SW_RESET;
|
|
cdns_imx_writel(data, USB3_CORE_CTRL1, value);
|
|
udelay(1);
|
|
|
|
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
|
|
value = (value & ~MODE_STRAP_MASK) | OTG_MODE | OC_DISABLE;
|
|
cdns_imx_writel(data, USB3_CORE_CTRL1, value);
|
|
|
|
value = cdns_imx_readl(data, USB3_INT_REG);
|
|
value |= HOST_INT1_EN | DEV_INT_EN;
|
|
cdns_imx_writel(data, USB3_INT_REG, value);
|
|
|
|
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
|
|
value &= ~ALL_SW_RESET;
|
|
cdns_imx_writel(data, USB3_CORE_CTRL1, value);
|
|
return ret;
|
|
}
|
|
|
|
static int cdns_imx_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct cdns_imx *data;
|
|
int ret;
|
|
|
|
if (!node)
|
|
return -ENODEV;
|
|
|
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, data);
|
|
data->dev = dev;
|
|
data->noncore = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(data->noncore)) {
|
|
dev_err(dev, "can't map IOMEM resource\n");
|
|
return PTR_ERR(data->noncore);
|
|
}
|
|
|
|
data->num_clks = ARRAY_SIZE(imx_cdns3_core_clks);
|
|
data->clks = (struct clk_bulk_data *)imx_cdns3_core_clks;
|
|
ret = devm_clk_bulk_get(dev, data->num_clks, data->clks);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = cdns_imx_noncore_init(data);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = of_platform_populate(node, NULL, NULL, dev);
|
|
if (ret) {
|
|
dev_err(dev, "failed to create children: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
return ret;
|
|
|
|
err:
|
|
clk_bulk_disable_unprepare(data->num_clks, data->clks);
|
|
return ret;
|
|
}
|
|
|
|
static int cdns_imx_remove_core(struct device *dev, void *data)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
|
|
platform_device_unregister(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cdns_imx_remove(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
|
|
device_for_each_child(dev, NULL, cdns_imx_remove_core);
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id cdns_imx_of_match[] = {
|
|
{ .compatible = "fsl,imx8qm-usb3", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, cdns_imx_of_match);
|
|
|
|
static struct platform_driver cdns_imx_driver = {
|
|
.probe = cdns_imx_probe,
|
|
.remove = cdns_imx_remove,
|
|
.driver = {
|
|
.name = "cdns3-imx",
|
|
.of_match_table = cdns_imx_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(cdns_imx_driver);
|
|
|
|
MODULE_ALIAS("platform:cdns3-imx");
|
|
MODULE_AUTHOR("Peter Chen <peter.chen@nxp.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("Cadence USB3 i.MX Glue Layer");
|