Ondrej Zary f40bff4239 cx82310_eth: wait for firmware to become ready ... When the device is powered up, some (older) firmware versions fail to work properly if we send commands before the boot is complete (everything is OK when the device is hot-plugged). The firmware indicates its ready status by putting the link up. Newer firmwares delay the first command so they don't suffer from this problem. They also report the link being always up. Wait for firmware to become ready (link up) before sending any commands and/or data. This also allows lowering CMD_TIMEOUT value to a reasonable time. Tested with 4.1.0.9 (old) and 4.1.0.30 (new) firmware versions. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>		2015-03-21 18:23:19 -04:00
..
appletalk	net/appletalk: LTPC needs virt_to_bus	2015-02-20 16:28:46 -05:00
arcnet	com20020-pci: add support for eae single card	2015-02-15 08:21:34 -08:00
bonding	net/bonding: Fix potential bad memory access during bonding events	2015-02-09 14:03:53 -08:00
caif	caif: remove wrong dev_net_set() call	2015-01-29 14:20:02 -08:00
can	can: kvaser_usb: Fix tx queue start/stop race conditions	2015-03-14 09:20:07 +01:00
cris	…
dsa	net: dsa: bcm_sf2: fix 64-bits register reads	2015-02-20 17:52:46 -05:00
ethernet	be2net: use PCI MMIO read instead of config read for errors	2015-03-20 13:25:51 -04:00
fddi	net: fddi: skfp: smt.c: Remove unused function	2015-01-02 16:36:07 -05:00
hamradio	hamradio: 6pack: remove unnecessary check	2014-11-03 15:34:31 -05:00
hippi	…
hyperv	hyperv: fix sparse warnings	2015-02-05 16:03:27 -08:00
ieee802154	ieee802154: cc2520: Fix space before , coding style issue	2015-02-02 06:09:35 +01:00
ipvlan	ipvlan: add a missing __percpu pcpu_stats	2015-02-11 20:03:23 -08:00
irda	irda: vlsi_ir: Replace timeval with ktime_t	2015-01-11 21:39:40 -05:00
phy	amd-xgbe-phy: PHY KX/KR mode differences	2015-02-25 16:57:42 -05:00
plip	…
ppp	ppp: deflate: never return len larger than output buffer	2015-01-29 14:50:01 -08:00
slip	…
team	team: don't traverse port list using rcu in team_set_mac_address	2015-03-04 16:01:16 -05:00
usb	cx82310_eth: wait for firmware to become ready	2015-03-21 18:23:19 -04:00
vmxnet3	Driver: Vmxnet3: Change the hex constant to its decimal equivalent	2015-02-08 16:55:01 -08:00
wan	wan: cosa: replace current->state by set_current_state()	2015-02-22 15:24:10 -05:00
wimax	…
wireless	iwlwifi:	2015-03-10 13:43:02 -04:00
xen-netback	xen-netback: notify immediately after pushing Tx response.	2015-03-11 23:30:44 -04:00
Kconfig	ipvlan: Fix text that talks about ip util support	2015-02-20 16:35:44 -05:00
LICENSE.SRC	…
Makefile	ipvlan: Initial check-in of the IPVLAN driver.	2014-11-24 15:29:18 -05:00
Space.c	…
dummy.c	dummy: use MODULE_VERSION	2014-12-09 21:51:06 -05:00
eql.c	…
ifb.c	…
loopback.c	…
macvlan.c	macvlan: advertise link netns via netlink	2015-01-23 17:51:15 -08:00
macvtap.c	macvtap: make sure neighbour code can push ethernet header	2015-02-28 23:57:19 -05:00
mdio.c	…
mii.c	mii: Handle link state changes for forced modes in mii_check_media()	2015-01-19 15:43:42 -05:00
netconsole.c	…
nlmon.c	…
ntb_netdev.c	…
rionet.c	…
sb1000.c	…
sungem_phy.c	…
tun.c	net: rfs: add hash collision detection	2015-02-08 16:53:57 -08:00
veth.c	veth: advertise link netns via netlink	2015-01-23 17:51:15 -08:00
virtio_net.c	virtio-net: correctly delete napi hash	2015-03-12 14:37:17 -04:00
vxlan.c	vxlan: fix wrong usage of VXLAN_VID_MASK	2015-03-13 13:08:07 -04:00
xen-netfront.c	xen-netfront: Use static attribute groups for sysfs entries	2015-02-05 00:31:12 -08:00