UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/extcon/extcon-ptn5150.c

360 lines
9.1 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
//
// extcon-ptn5150.c - PTN5150 CC logic extcon driver to support USB detection
//
// Based on extcon-sm5502.c driver
// Copyright (c) 2018-2019 by Vijai Kumar K
// Author: Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>
// Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org>
#include <linux/bitfield.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/extcon-provider.h>
#include <linux/gpio/consumer.h>
#include <linux/usb/role.h>
/* PTN5150 registers */
#define PTN5150_REG_DEVICE_ID 0x01
#define PTN5150_REG_CONTROL 0x02
#define PTN5150_REG_INT_STATUS 0x03
#define PTN5150_REG_CC_STATUS 0x04
#define PTN5150_REG_CON_DET 0x09
#define PTN5150_REG_VCONN_STATUS 0x0a
#define PTN5150_REG_RESET 0x0b
#define PTN5150_REG_INT_MASK 0x18
#define PTN5150_REG_INT_REG_STATUS 0x19
#define PTN5150_REG_END PTN5150_REG_INT_REG_STATUS
#define PTN5150_DFP_ATTACHED 0x1
#define PTN5150_UFP_ATTACHED 0x2
/* Define PTN5150 MASK/SHIFT constant */
#define PTN5150_REG_DEVICE_ID_VERSION GENMASK(7, 3)
#define PTN5150_REG_DEVICE_ID_VENDOR GENMASK(2, 0)
#define PTN5150_REG_CC_PORT_ATTACHMENT GENMASK(4, 2)
#define PTN5150_REG_CC_VBUS_DETECTION BIT(7)
#define PTN5150_REG_INT_CABLE_ATTACH_MASK BIT(0)
#define PTN5150_REG_INT_CABLE_DETACH_MASK BIT(1)
struct ptn5150_info {
struct device *dev;
struct extcon_dev *edev;
struct i2c_client *i2c;
struct regmap *regmap;
struct gpio_desc *int_gpiod;
struct gpio_desc *vbus_gpiod;
int irq;
struct work_struct irq_work;
struct mutex mutex;
struct usb_role_switch *role_sw;
};
/* List of detectable cables */
static const unsigned int ptn5150_extcon_cable[] = {
EXTCON_USB,
EXTCON_USB_HOST,
EXTCON_NONE,
};
static const struct regmap_config ptn5150_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = PTN5150_REG_END,
};
static void ptn5150_check_state(struct ptn5150_info *info)
{
unsigned int port_status, reg_data, vbus;
enum usb_role usb_role = USB_ROLE_NONE;
int ret;
ret = regmap_read(info->regmap, PTN5150_REG_CC_STATUS, &reg_data);
if (ret) {
dev_err(info->dev, "failed to read CC STATUS %d\n", ret);
return;
}
port_status = FIELD_GET(PTN5150_REG_CC_PORT_ATTACHMENT, reg_data);
switch (port_status) {
case PTN5150_DFP_ATTACHED:
extcon_set_state_sync(info->edev, EXTCON_USB_HOST, false);
gpiod_set_value_cansleep(info->vbus_gpiod, 0);
extcon_set_state_sync(info->edev, EXTCON_USB, true);
usb_role = USB_ROLE_DEVICE;
break;
case PTN5150_UFP_ATTACHED:
extcon_set_state_sync(info->edev, EXTCON_USB, false);
vbus = FIELD_GET(PTN5150_REG_CC_VBUS_DETECTION, reg_data);
if (vbus)
gpiod_set_value_cansleep(info->vbus_gpiod, 0);
else
gpiod_set_value_cansleep(info->vbus_gpiod, 1);
extcon_set_state_sync(info->edev, EXTCON_USB_HOST, true);
usb_role = USB_ROLE_HOST;
break;
default:
break;
}
if (usb_role) {
ret = usb_role_switch_set_role(info->role_sw, usb_role);
if (ret)
dev_err(info->dev, "failed to set %s role: %d\n",
usb_role_string(usb_role), ret);
}
}
static void ptn5150_irq_work(struct work_struct *work)
{
struct ptn5150_info *info = container_of(work,
struct ptn5150_info, irq_work);
int ret = 0;
unsigned int int_status;
if (!info->edev)
return;
mutex_lock(&info->mutex);
/* Clear interrupt. Read would clear the register */
ret = regmap_read(info->regmap, PTN5150_REG_INT_STATUS, &int_status);
if (ret) {
dev_err(info->dev, "failed to read INT STATUS %d\n", ret);
mutex_unlock(&info->mutex);
return;
}
if (int_status) {
unsigned int cable_attach;
cable_attach = int_status & PTN5150_REG_INT_CABLE_ATTACH_MASK;
if (cable_attach) {
ptn5150_check_state(info);
} else {
extcon_set_state_sync(info->edev,
EXTCON_USB_HOST, false);
extcon_set_state_sync(info->edev,
EXTCON_USB, false);
gpiod_set_value_cansleep(info->vbus_gpiod, 0);
ret = usb_role_switch_set_role(info->role_sw,
USB_ROLE_NONE);
if (ret)
dev_err(info->dev,
"failed to set none role: %d\n",
ret);
}
}
/* Clear interrupt. Read would clear the register */
ret = regmap_read(info->regmap, PTN5150_REG_INT_REG_STATUS,
&int_status);
if (ret) {
dev_err(info->dev,
"failed to read INT REG STATUS %d\n", ret);
mutex_unlock(&info->mutex);
return;
}
mutex_unlock(&info->mutex);
}
static irqreturn_t ptn5150_irq_handler(int irq, void *data)
{
struct ptn5150_info *info = data;
schedule_work(&info->irq_work);
return IRQ_HANDLED;
}
static int ptn5150_init_dev_type(struct ptn5150_info *info)
{
unsigned int reg_data, vendor_id, version_id;
int ret;
ret = regmap_read(info->regmap, PTN5150_REG_DEVICE_ID, &reg_data);
if (ret) {
dev_err(info->dev, "failed to read DEVICE_ID %d\n", ret);
return -EINVAL;
}
vendor_id = FIELD_GET(PTN5150_REG_DEVICE_ID_VENDOR, reg_data);
version_id = FIELD_GET(PTN5150_REG_DEVICE_ID_VERSION, reg_data);
dev_dbg(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n",
version_id, vendor_id);
/* Clear any existing interrupts */
ret = regmap_read(info->regmap, PTN5150_REG_INT_STATUS, &reg_data);
if (ret) {
dev_err(info->dev,
"failed to read PTN5150_REG_INT_STATUS %d\n",
ret);
return -EINVAL;
}
ret = regmap_read(info->regmap, PTN5150_REG_INT_REG_STATUS, &reg_data);
if (ret) {
dev_err(info->dev,
"failed to read PTN5150_REG_INT_REG_STATUS %d\n", ret);
return -EINVAL;
}
return 0;
}
static void ptn5150_work_sync_and_put(void *data)
{
struct ptn5150_info *info = data;
cancel_work_sync(&info->irq_work);
usb_role_switch_put(info->role_sw);
}
static int ptn5150_i2c_probe(struct i2c_client *i2c)
{
struct device *dev = &i2c->dev;
struct device_node *np = i2c->dev.of_node;
struct ptn5150_info *info;
int ret;
if (!np)
return -EINVAL;
info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
i2c_set_clientdata(i2c, info);
info->dev = &i2c->dev;
info->i2c = i2c;
info->vbus_gpiod = devm_gpiod_get(&i2c->dev, "vbus", GPIOD_OUT_LOW);
if (IS_ERR(info->vbus_gpiod)) {
ret = PTR_ERR(info->vbus_gpiod);
if (ret == -ENOENT) {
dev_info(dev, "No VBUS GPIO, ignoring VBUS control\n");
info->vbus_gpiod = NULL;
} else {
return dev_err_probe(dev, ret, "failed to get VBUS GPIO\n");
}
}
mutex_init(&info->mutex);
INIT_WORK(&info->irq_work, ptn5150_irq_work);
info->regmap = devm_regmap_init_i2c(i2c, &ptn5150_regmap_config);
if (IS_ERR(info->regmap)) {
return dev_err_probe(info->dev, PTR_ERR(info->regmap),
"failed to allocate register map\n");
}
if (i2c->irq > 0) {
info->irq = i2c->irq;
} else {
info->int_gpiod = devm_gpiod_get(&i2c->dev, "int", GPIOD_IN);
if (IS_ERR(info->int_gpiod)) {
return dev_err_probe(dev, PTR_ERR(info->int_gpiod),
"failed to get INT GPIO\n");
}
info->irq = gpiod_to_irq(info->int_gpiod);
if (info->irq < 0) {
dev_err(dev, "failed to get INTB IRQ\n");
return info->irq;
}
}
ret = devm_request_threaded_irq(dev, info->irq, NULL,
ptn5150_irq_handler,
IRQF_TRIGGER_FALLING |
IRQF_ONESHOT,
i2c->name, info);
if (ret < 0) {
dev_err(dev, "failed to request handler for INTB IRQ\n");
return ret;
}
/* Allocate extcon device */
info->edev = devm_extcon_dev_allocate(info->dev, ptn5150_extcon_cable);
if (IS_ERR(info->edev)) {
dev_err(info->dev, "failed to allocate memory for extcon\n");
return -ENOMEM;
}
/* Register extcon device */
ret = devm_extcon_dev_register(info->dev, info->edev);
if (ret) {
dev_err(info->dev, "failed to register extcon device\n");
return ret;
}
extcon_set_property_capability(info->edev, EXTCON_USB,
EXTCON_PROP_USB_VBUS);
extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
EXTCON_PROP_USB_VBUS);
extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
EXTCON_PROP_USB_TYPEC_POLARITY);
/* Initialize PTN5150 device and print vendor id and version id */
ret = ptn5150_init_dev_type(info);
if (ret)
return -EINVAL;
info->role_sw = usb_role_switch_get(info->dev);
if (IS_ERR(info->role_sw))
return dev_err_probe(info->dev, PTR_ERR(info->role_sw),
"failed to get role switch\n");
ret = devm_add_action_or_reset(dev, ptn5150_work_sync_and_put, info);
if (ret)
return ret;
/*
* Update current extcon state if for example OTG connection was there
* before the probe
*/
mutex_lock(&info->mutex);
ptn5150_check_state(info);
mutex_unlock(&info->mutex);
return 0;
}
static const struct of_device_id ptn5150_dt_match[] = {
{ .compatible = "nxp,ptn5150" },
{ },
};
MODULE_DEVICE_TABLE(of, ptn5150_dt_match);
static const struct i2c_device_id ptn5150_i2c_id[] = {
{ "ptn5150", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ptn5150_i2c_id);
static struct i2c_driver ptn5150_i2c_driver = {
.driver = {
.name = "ptn5150",
.of_match_table = ptn5150_dt_match,
},
.probe = ptn5150_i2c_probe,
.id_table = ptn5150_i2c_id,
};
module_i2c_driver(ptn5150_i2c_driver);
MODULE_DESCRIPTION("NXP PTN5150 CC logic Extcon driver");
MODULE_AUTHOR("Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>");
MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
MODULE_LICENSE("GPL v2");
Reference in New Issue View Git Blame Copy Permalink