UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/spi/spi-sc18is602.c

349 lines
8.2 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* NXP SC18IS602/603 SPI driver
*
* Copyright (C) Guenter Roeck <linux@roeck-us.net>
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/pm_runtime.h>
#include <linux/of_device.h>
#include <linux/of.h>
#include <linux/platform_data/sc18is602.h>
#include <linux/gpio/consumer.h>
enum chips { sc18is602, sc18is602b, sc18is603 };
#define SC18IS602_BUFSIZ 200
#define SC18IS602_CLOCK 7372000
#define SC18IS602_MODE_CPHA BIT(2)
#define SC18IS602_MODE_CPOL BIT(3)
#define SC18IS602_MODE_LSB_FIRST BIT(5)
#define SC18IS602_MODE_CLOCK_DIV_4 0x0
#define SC18IS602_MODE_CLOCK_DIV_16 0x1
#define SC18IS602_MODE_CLOCK_DIV_64 0x2
#define SC18IS602_MODE_CLOCK_DIV_128 0x3
struct sc18is602 {
struct spi_master *master;
struct device *dev;
u8 ctrl;
u32 freq;
u32 speed;
/* I2C data */
struct i2c_client *client;
enum chips id;
u8 buffer[SC18IS602_BUFSIZ + 1];
int tlen; /* Data queued for tx in buffer */
int rindex; /* Receive data index in buffer */
struct gpio_desc *reset;
};
static int sc18is602_wait_ready(struct sc18is602 *hw, int len)
{
int i, err;
int usecs = 1000000 * len / hw->speed + 1;
u8 dummy[1];
for (i = 0; i < 10; i++) {
err = i2c_master_recv(hw->client, dummy, 1);
if (err >= 0)
return 0;
usleep_range(usecs, usecs * 2);
}
return -ETIMEDOUT;
}
static int sc18is602_txrx(struct sc18is602 *hw, struct spi_message *msg,
struct spi_transfer *t, bool do_transfer)
{
unsigned int len = t->len;
int ret;
if (hw->tlen == 0) {
/* First byte (I2C command) is chip select */
hw->buffer[0] = 1 << msg->spi->chip_select;
hw->tlen = 1;
hw->rindex = 0;
}
/*
* We can not immediately send data to the chip, since each I2C message
* resembles a full SPI message (from CS active to CS inactive).
* Enqueue messages up to the first read or until do_transfer is true.
*/
if (t->tx_buf) {
memcpy(&hw->buffer[hw->tlen], t->tx_buf, len);
hw->tlen += len;
if (t->rx_buf)
do_transfer = true;
else
hw->rindex = hw->tlen - 1;
} else if (t->rx_buf) {
/*
* For receive-only transfers we still need to perform a dummy
* write to receive data from the SPI chip.
* Read data starts at the end of transmit data (minus 1 to
* account for CS).
*/
hw->rindex = hw->tlen - 1;
memset(&hw->buffer[hw->tlen], 0, len);
hw->tlen += len;
do_transfer = true;
}
if (do_transfer && hw->tlen > 1) {
ret = sc18is602_wait_ready(hw, SC18IS602_BUFSIZ);
if (ret < 0)
return ret;
ret = i2c_master_send(hw->client, hw->buffer, hw->tlen);
if (ret < 0)
return ret;
if (ret != hw->tlen)
return -EIO;
if (t->rx_buf) {
int rlen = hw->rindex + len;
ret = sc18is602_wait_ready(hw, hw->tlen);
if (ret < 0)
return ret;
ret = i2c_master_recv(hw->client, hw->buffer, rlen);
if (ret < 0)
return ret;
if (ret != rlen)
return -EIO;
memcpy(t->rx_buf, &hw->buffer[hw->rindex], len);
}
hw->tlen = 0;
}
return len;
}
static int sc18is602_setup_transfer(struct sc18is602 *hw, u32 hz, u8 mode)
{
u8 ctrl = 0;
int ret;
if (mode & SPI_CPHA)
ctrl |= SC18IS602_MODE_CPHA;
if (mode & SPI_CPOL)
ctrl |= SC18IS602_MODE_CPOL;
if (mode & SPI_LSB_FIRST)
ctrl |= SC18IS602_MODE_LSB_FIRST;
/* Find the closest clock speed */
if (hz >= hw->freq / 4) {
ctrl |= SC18IS602_MODE_CLOCK_DIV_4;
hw->speed = hw->freq / 4;
} else if (hz >= hw->freq / 16) {
ctrl |= SC18IS602_MODE_CLOCK_DIV_16;
hw->speed = hw->freq / 16;
} else if (hz >= hw->freq / 64) {
ctrl |= SC18IS602_MODE_CLOCK_DIV_64;
hw->speed = hw->freq / 64;
} else {
ctrl |= SC18IS602_MODE_CLOCK_DIV_128;
hw->speed = hw->freq / 128;
}
/*
* Don't do anything if the control value did not change. The initial
* value of 0xff for hw->ctrl ensures that the correct mode will be set
* with the first call to this function.
*/
if (ctrl == hw->ctrl)
return 0;
ret = i2c_smbus_write_byte_data(hw->client, 0xf0, ctrl);
if (ret < 0)
return ret;
hw->ctrl = ctrl;
return 0;
}
static int sc18is602_check_transfer(struct spi_device *spi,
struct spi_transfer *t, int tlen)
{
if (t && t->len + tlen > SC18IS602_BUFSIZ + 1)
return -EINVAL;
return 0;
}
static int sc18is602_transfer_one(struct spi_master *master,
struct spi_message *m)
{
struct sc18is602 *hw = spi_master_get_devdata(master);
struct spi_device *spi = m->spi;
struct spi_transfer *t;
int status = 0;
hw->tlen = 0;
list_for_each_entry(t, &m->transfers, transfer_list) {
bool do_transfer;
status = sc18is602_check_transfer(spi, t, hw->tlen);
if (status < 0)
break;
status = sc18is602_setup_transfer(hw, t->speed_hz, spi->mode);
if (status < 0)
break;
do_transfer = t->cs_change || list_is_last(&t->transfer_list,
&m->transfers);
if (t->len) {
status = sc18is602_txrx(hw, m, t, do_transfer);
if (status < 0)
break;
m->actual_length += status;
}
status = 0;
spi_transfer_delay_exec(t);
}
m->status = status;
spi_finalize_current_message(master);
return status;
}
static size_t sc18is602_max_transfer_size(struct spi_device *spi)
{
return SC18IS602_BUFSIZ;
}
static int sc18is602_setup(struct spi_device *spi)
{
struct sc18is602 *hw = spi_master_get_devdata(spi->master);
/* SC18IS602 does not support CS2 */
if (hw->id == sc18is602 && spi->chip_select == 2)
return -ENXIO;
return 0;
}
static int sc18is602_probe(struct i2c_client *client)
{
const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct device *dev = &client->dev;
struct device_node *np = dev->of_node;
struct sc18is602_platform_data *pdata = dev_get_platdata(dev);
struct sc18is602 *hw;
struct spi_master *master;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
return -EINVAL;
master = devm_spi_alloc_master(dev, sizeof(struct sc18is602));
if (!master)
return -ENOMEM;
hw = spi_master_get_devdata(master);
i2c_set_clientdata(client, hw);
/* assert reset and then release */
hw->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(hw->reset))
return PTR_ERR(hw->reset);
gpiod_set_value_cansleep(hw->reset, 0);
hw->master = master;
hw->client = client;
hw->dev = dev;
hw->ctrl = 0xff;
if (client->dev.of_node)
hw->id = (enum chips)of_device_get_match_data(&client->dev);
else
hw->id = id->driver_data;
switch (hw->id) {
case sc18is602:
case sc18is602b:
master->num_chipselect = 4;
hw->freq = SC18IS602_CLOCK;
break;
case sc18is603:
master->num_chipselect = 2;
if (pdata) {
hw->freq = pdata->clock_frequency;
} else {
const __be32 *val;
int len;
val = of_get_property(np, "clock-frequency", &len);
if (val && len >= sizeof(__be32))
hw->freq = be32_to_cpup(val);
}
if (!hw->freq)
hw->freq = SC18IS602_CLOCK;
break;
}
master->bus_num = np ? -1 : client->adapter->nr;
master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST;
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->setup = sc18is602_setup;
master->transfer_one_message = sc18is602_transfer_one;
master->max_transfer_size = sc18is602_max_transfer_size;
master->max_message_size = sc18is602_max_transfer_size;
master->dev.of_node = np;
master->min_speed_hz = hw->freq / 128;
master->max_speed_hz = hw->freq / 4;
return devm_spi_register_master(dev, master);
}
static const struct i2c_device_id sc18is602_id[] = {
{ "sc18is602", sc18is602 },
{ "sc18is602b", sc18is602b },
{ "sc18is603", sc18is603 },
{ }
};
MODULE_DEVICE_TABLE(i2c, sc18is602_id);
static const struct of_device_id sc18is602_of_match[] = {
{
.compatible = "nxp,sc18is602",
.data = (void *)sc18is602
},
{
.compatible = "nxp,sc18is602b",
.data = (void *)sc18is602b
},
{
.compatible = "nxp,sc18is603",
.data = (void *)sc18is603
},
{ },
};
MODULE_DEVICE_TABLE(of, sc18is602_of_match);
static struct i2c_driver sc18is602_driver = {
.driver = {
.name = "sc18is602",
.of_match_table = of_match_ptr(sc18is602_of_match),
},
.probe_new = sc18is602_probe,
.id_table = sc18is602_id,
};
module_i2c_driver(sc18is602_driver);
MODULE_DESCRIPTION("SC18IS602/603 SPI Master Driver");
MODULE_AUTHOR("Guenter Roeck");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink