696 lines
17 KiB
C
696 lines
17 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* AXP20x PMIC USB power supply status driver
|
|
*
|
|
* Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
|
|
* Copyright (C) 2014 Bruno Prémont <bonbons@linux-vserver.org>
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/device.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/axp20x.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/iio/consumer.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#define DRVNAME "axp20x-usb-power-supply"
|
|
|
|
#define AXP20X_PWR_STATUS_VBUS_PRESENT BIT(5)
|
|
#define AXP20X_PWR_STATUS_VBUS_USED BIT(4)
|
|
|
|
#define AXP20X_USB_STATUS_VBUS_VALID BIT(2)
|
|
|
|
#define AXP20X_VBUS_PATH_SEL BIT(7)
|
|
#define AXP20X_VBUS_PATH_SEL_OFFSET 7
|
|
|
|
#define AXP20X_VBUS_VHOLD_uV(b) (4000000 + (((b) >> 3) & 7) * 100000)
|
|
#define AXP20X_VBUS_VHOLD_MASK GENMASK(5, 3)
|
|
#define AXP20X_VBUS_VHOLD_OFFSET 3
|
|
#define AXP20X_VBUS_CLIMIT_MASK 3
|
|
#define AXP20X_VBUS_CLIMIT_900mA 0
|
|
#define AXP20X_VBUS_CLIMIT_500mA 1
|
|
#define AXP20X_VBUS_CLIMIT_100mA 2
|
|
#define AXP20X_VBUS_CLIMIT_NONE 3
|
|
|
|
#define AXP813_VBUS_CLIMIT_900mA 0
|
|
#define AXP813_VBUS_CLIMIT_1500mA 1
|
|
#define AXP813_VBUS_CLIMIT_2000mA 2
|
|
#define AXP813_VBUS_CLIMIT_2500mA 3
|
|
|
|
#define AXP20X_ADC_EN1_VBUS_CURR BIT(2)
|
|
#define AXP20X_ADC_EN1_VBUS_VOLT BIT(3)
|
|
|
|
#define AXP20X_VBUS_MON_VBUS_VALID BIT(3)
|
|
|
|
#define AXP813_BC_EN BIT(0)
|
|
|
|
/*
|
|
* Note do not raise the debounce time, we must report Vusb high within
|
|
* 100ms otherwise we get Vbus errors in musb.
|
|
*/
|
|
#define DEBOUNCE_TIME msecs_to_jiffies(50)
|
|
|
|
struct axp20x_usb_power {
|
|
struct regmap *regmap;
|
|
struct power_supply *supply;
|
|
enum axp20x_variants axp20x_id;
|
|
struct iio_channel *vbus_v;
|
|
struct iio_channel *vbus_i;
|
|
struct delayed_work vbus_detect;
|
|
unsigned int old_status;
|
|
unsigned int online;
|
|
unsigned int num_irqs;
|
|
unsigned int irqs[];
|
|
};
|
|
|
|
static bool axp20x_usb_vbus_needs_polling(struct axp20x_usb_power *power)
|
|
{
|
|
/*
|
|
* Polling is only necessary while VBUS is offline. While online, a
|
|
* present->absent transition implies an online->offline transition
|
|
* and will trigger the VBUS_REMOVAL IRQ.
|
|
*/
|
|
if (power->axp20x_id >= AXP221_ID && !power->online)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static irqreturn_t axp20x_usb_power_irq(int irq, void *devid)
|
|
{
|
|
struct axp20x_usb_power *power = devid;
|
|
|
|
power_supply_changed(power->supply);
|
|
|
|
mod_delayed_work(system_power_efficient_wq, &power->vbus_detect, DEBOUNCE_TIME);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void axp20x_usb_power_poll_vbus(struct work_struct *work)
|
|
{
|
|
struct axp20x_usb_power *power =
|
|
container_of(work, struct axp20x_usb_power, vbus_detect.work);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &val);
|
|
if (ret)
|
|
goto out;
|
|
|
|
val &= (AXP20X_PWR_STATUS_VBUS_PRESENT | AXP20X_PWR_STATUS_VBUS_USED);
|
|
if (val != power->old_status)
|
|
power_supply_changed(power->supply);
|
|
|
|
power->old_status = val;
|
|
power->online = val & AXP20X_PWR_STATUS_VBUS_USED;
|
|
|
|
out:
|
|
if (axp20x_usb_vbus_needs_polling(power))
|
|
mod_delayed_work(system_power_efficient_wq, &power->vbus_detect, DEBOUNCE_TIME);
|
|
}
|
|
|
|
static int axp20x_get_current_max(struct axp20x_usb_power *power, int *val)
|
|
{
|
|
unsigned int v;
|
|
int ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (v & AXP20X_VBUS_CLIMIT_MASK) {
|
|
case AXP20X_VBUS_CLIMIT_100mA:
|
|
if (power->axp20x_id == AXP221_ID)
|
|
*val = -1; /* No 100mA limit */
|
|
else
|
|
*val = 100000;
|
|
break;
|
|
case AXP20X_VBUS_CLIMIT_500mA:
|
|
*val = 500000;
|
|
break;
|
|
case AXP20X_VBUS_CLIMIT_900mA:
|
|
*val = 900000;
|
|
break;
|
|
case AXP20X_VBUS_CLIMIT_NONE:
|
|
*val = -1;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axp813_get_current_max(struct axp20x_usb_power *power, int *val)
|
|
{
|
|
unsigned int v;
|
|
int ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (v & AXP20X_VBUS_CLIMIT_MASK) {
|
|
case AXP813_VBUS_CLIMIT_900mA:
|
|
*val = 900000;
|
|
break;
|
|
case AXP813_VBUS_CLIMIT_1500mA:
|
|
*val = 1500000;
|
|
break;
|
|
case AXP813_VBUS_CLIMIT_2000mA:
|
|
*val = 2000000;
|
|
break;
|
|
case AXP813_VBUS_CLIMIT_2500mA:
|
|
*val = 2500000;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int axp20x_usb_power_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp, union power_supply_propval *val)
|
|
{
|
|
struct axp20x_usb_power *power = power_supply_get_drvdata(psy);
|
|
unsigned int input, v;
|
|
int ret;
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_VOLTAGE_MIN:
|
|
ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val->intval = AXP20X_VBUS_VHOLD_uV(v);
|
|
return 0;
|
|
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
|
if (IS_ENABLED(CONFIG_AXP20X_ADC)) {
|
|
ret = iio_read_channel_processed(power->vbus_v,
|
|
&val->intval);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* IIO framework gives mV but Power Supply framework
|
|
* gives uV.
|
|
*/
|
|
val->intval *= 1000;
|
|
return 0;
|
|
}
|
|
|
|
ret = axp20x_read_variable_width(power->regmap,
|
|
AXP20X_VBUS_V_ADC_H, 12);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val->intval = ret * 1700; /* 1 step = 1.7 mV */
|
|
return 0;
|
|
case POWER_SUPPLY_PROP_CURRENT_MAX:
|
|
if (power->axp20x_id == AXP813_ID)
|
|
return axp813_get_current_max(power, &val->intval);
|
|
return axp20x_get_current_max(power, &val->intval);
|
|
case POWER_SUPPLY_PROP_CURRENT_NOW:
|
|
if (IS_ENABLED(CONFIG_AXP20X_ADC)) {
|
|
ret = iio_read_channel_processed(power->vbus_i,
|
|
&val->intval);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* IIO framework gives mA but Power Supply framework
|
|
* gives uA.
|
|
*/
|
|
val->intval *= 1000;
|
|
return 0;
|
|
}
|
|
|
|
ret = axp20x_read_variable_width(power->regmap,
|
|
AXP20X_VBUS_I_ADC_H, 12);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val->intval = ret * 375; /* 1 step = 0.375 mA */
|
|
return 0;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* All the properties below need the input-status reg value */
|
|
ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &input);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_HEALTH:
|
|
if (!(input & AXP20X_PWR_STATUS_VBUS_PRESENT)) {
|
|
val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
val->intval = POWER_SUPPLY_HEALTH_GOOD;
|
|
|
|
if (power->axp20x_id == AXP202_ID) {
|
|
ret = regmap_read(power->regmap,
|
|
AXP20X_USB_OTG_STATUS, &v);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!(v & AXP20X_USB_STATUS_VBUS_VALID))
|
|
val->intval =
|
|
POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
|
|
}
|
|
break;
|
|
case POWER_SUPPLY_PROP_PRESENT:
|
|
val->intval = !!(input & AXP20X_PWR_STATUS_VBUS_PRESENT);
|
|
break;
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
val->intval = !!(input & AXP20X_PWR_STATUS_VBUS_USED);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axp813_usb_power_set_online(struct axp20x_usb_power *power,
|
|
int intval)
|
|
{
|
|
int val = !intval << AXP20X_VBUS_PATH_SEL_OFFSET;
|
|
|
|
return regmap_update_bits(power->regmap,
|
|
AXP20X_VBUS_IPSOUT_MGMT,
|
|
AXP20X_VBUS_PATH_SEL, val);
|
|
}
|
|
|
|
static int axp20x_usb_power_set_voltage_min(struct axp20x_usb_power *power,
|
|
int intval)
|
|
{
|
|
int val;
|
|
|
|
switch (intval) {
|
|
case 4000000:
|
|
case 4100000:
|
|
case 4200000:
|
|
case 4300000:
|
|
case 4400000:
|
|
case 4500000:
|
|
case 4600000:
|
|
case 4700000:
|
|
val = (intval - 4000000) / 100000;
|
|
return regmap_update_bits(power->regmap,
|
|
AXP20X_VBUS_IPSOUT_MGMT,
|
|
AXP20X_VBUS_VHOLD_MASK,
|
|
val << AXP20X_VBUS_VHOLD_OFFSET);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int axp813_usb_power_set_current_max(struct axp20x_usb_power *power,
|
|
int intval)
|
|
{
|
|
int val;
|
|
|
|
switch (intval) {
|
|
case 900000:
|
|
return regmap_update_bits(power->regmap,
|
|
AXP20X_VBUS_IPSOUT_MGMT,
|
|
AXP20X_VBUS_CLIMIT_MASK,
|
|
AXP813_VBUS_CLIMIT_900mA);
|
|
case 1500000:
|
|
case 2000000:
|
|
case 2500000:
|
|
val = (intval - 1000000) / 500000;
|
|
return regmap_update_bits(power->regmap,
|
|
AXP20X_VBUS_IPSOUT_MGMT,
|
|
AXP20X_VBUS_CLIMIT_MASK, val);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int axp20x_usb_power_set_current_max(struct axp20x_usb_power *power,
|
|
int intval)
|
|
{
|
|
int val;
|
|
|
|
switch (intval) {
|
|
case 100000:
|
|
if (power->axp20x_id == AXP221_ID)
|
|
return -EINVAL;
|
|
fallthrough;
|
|
case 500000:
|
|
case 900000:
|
|
val = (900000 - intval) / 400000;
|
|
return regmap_update_bits(power->regmap,
|
|
AXP20X_VBUS_IPSOUT_MGMT,
|
|
AXP20X_VBUS_CLIMIT_MASK, val);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int axp20x_usb_power_set_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
const union power_supply_propval *val)
|
|
{
|
|
struct axp20x_usb_power *power = power_supply_get_drvdata(psy);
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
if (power->axp20x_id != AXP813_ID)
|
|
return -EINVAL;
|
|
return axp813_usb_power_set_online(power, val->intval);
|
|
|
|
case POWER_SUPPLY_PROP_VOLTAGE_MIN:
|
|
return axp20x_usb_power_set_voltage_min(power, val->intval);
|
|
|
|
case POWER_SUPPLY_PROP_CURRENT_MAX:
|
|
if (power->axp20x_id == AXP813_ID)
|
|
return axp813_usb_power_set_current_max(power,
|
|
val->intval);
|
|
return axp20x_usb_power_set_current_max(power, val->intval);
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int axp20x_usb_power_prop_writeable(struct power_supply *psy,
|
|
enum power_supply_property psp)
|
|
{
|
|
struct axp20x_usb_power *power = power_supply_get_drvdata(psy);
|
|
|
|
/*
|
|
* The VBUS path select flag works differently on AXP288 and newer:
|
|
* - On AXP20x and AXP22x, the flag enables VBUS (ignoring N_VBUSEN).
|
|
* - On AXP288 and AXP8xx, the flag disables VBUS (ignoring N_VBUSEN).
|
|
* We only expose the control on variants where it can be used to force
|
|
* the VBUS input offline.
|
|
*/
|
|
if (psp == POWER_SUPPLY_PROP_ONLINE)
|
|
return power->axp20x_id == AXP813_ID;
|
|
|
|
return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN ||
|
|
psp == POWER_SUPPLY_PROP_CURRENT_MAX;
|
|
}
|
|
|
|
static enum power_supply_property axp20x_usb_power_properties[] = {
|
|
POWER_SUPPLY_PROP_HEALTH,
|
|
POWER_SUPPLY_PROP_PRESENT,
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
POWER_SUPPLY_PROP_VOLTAGE_MIN,
|
|
POWER_SUPPLY_PROP_VOLTAGE_NOW,
|
|
POWER_SUPPLY_PROP_CURRENT_MAX,
|
|
POWER_SUPPLY_PROP_CURRENT_NOW,
|
|
};
|
|
|
|
static enum power_supply_property axp22x_usb_power_properties[] = {
|
|
POWER_SUPPLY_PROP_HEALTH,
|
|
POWER_SUPPLY_PROP_PRESENT,
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
POWER_SUPPLY_PROP_VOLTAGE_MIN,
|
|
POWER_SUPPLY_PROP_CURRENT_MAX,
|
|
};
|
|
|
|
static const struct power_supply_desc axp20x_usb_power_desc = {
|
|
.name = "axp20x-usb",
|
|
.type = POWER_SUPPLY_TYPE_USB,
|
|
.properties = axp20x_usb_power_properties,
|
|
.num_properties = ARRAY_SIZE(axp20x_usb_power_properties),
|
|
.property_is_writeable = axp20x_usb_power_prop_writeable,
|
|
.get_property = axp20x_usb_power_get_property,
|
|
.set_property = axp20x_usb_power_set_property,
|
|
};
|
|
|
|
static const struct power_supply_desc axp22x_usb_power_desc = {
|
|
.name = "axp20x-usb",
|
|
.type = POWER_SUPPLY_TYPE_USB,
|
|
.properties = axp22x_usb_power_properties,
|
|
.num_properties = ARRAY_SIZE(axp22x_usb_power_properties),
|
|
.property_is_writeable = axp20x_usb_power_prop_writeable,
|
|
.get_property = axp20x_usb_power_get_property,
|
|
.set_property = axp20x_usb_power_set_property,
|
|
};
|
|
|
|
static const char * const axp20x_irq_names[] = {
|
|
"VBUS_PLUGIN",
|
|
"VBUS_REMOVAL",
|
|
"VBUS_VALID",
|
|
"VBUS_NOT_VALID",
|
|
};
|
|
|
|
static const char * const axp22x_irq_names[] = {
|
|
"VBUS_PLUGIN",
|
|
"VBUS_REMOVAL",
|
|
};
|
|
|
|
struct axp_data {
|
|
const struct power_supply_desc *power_desc;
|
|
const char * const *irq_names;
|
|
unsigned int num_irq_names;
|
|
enum axp20x_variants axp20x_id;
|
|
};
|
|
|
|
static const struct axp_data axp202_data = {
|
|
.power_desc = &axp20x_usb_power_desc,
|
|
.irq_names = axp20x_irq_names,
|
|
.num_irq_names = ARRAY_SIZE(axp20x_irq_names),
|
|
.axp20x_id = AXP202_ID,
|
|
};
|
|
|
|
static const struct axp_data axp221_data = {
|
|
.power_desc = &axp22x_usb_power_desc,
|
|
.irq_names = axp22x_irq_names,
|
|
.num_irq_names = ARRAY_SIZE(axp22x_irq_names),
|
|
.axp20x_id = AXP221_ID,
|
|
};
|
|
|
|
static const struct axp_data axp223_data = {
|
|
.power_desc = &axp22x_usb_power_desc,
|
|
.irq_names = axp22x_irq_names,
|
|
.num_irq_names = ARRAY_SIZE(axp22x_irq_names),
|
|
.axp20x_id = AXP223_ID,
|
|
};
|
|
|
|
static const struct axp_data axp813_data = {
|
|
.power_desc = &axp22x_usb_power_desc,
|
|
.irq_names = axp22x_irq_names,
|
|
.num_irq_names = ARRAY_SIZE(axp22x_irq_names),
|
|
.axp20x_id = AXP813_ID,
|
|
};
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int axp20x_usb_power_suspend(struct device *dev)
|
|
{
|
|
struct axp20x_usb_power *power = dev_get_drvdata(dev);
|
|
int i = 0;
|
|
|
|
/*
|
|
* Allow wake via VBUS_PLUGIN only.
|
|
*
|
|
* As nested threaded IRQs are not automatically disabled during
|
|
* suspend, we must explicitly disable the remainder of the IRQs.
|
|
*/
|
|
if (device_may_wakeup(&power->supply->dev))
|
|
enable_irq_wake(power->irqs[i++]);
|
|
while (i < power->num_irqs)
|
|
disable_irq(power->irqs[i++]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axp20x_usb_power_resume(struct device *dev)
|
|
{
|
|
struct axp20x_usb_power *power = dev_get_drvdata(dev);
|
|
int i = 0;
|
|
|
|
if (device_may_wakeup(&power->supply->dev))
|
|
disable_irq_wake(power->irqs[i++]);
|
|
while (i < power->num_irqs)
|
|
enable_irq(power->irqs[i++]);
|
|
|
|
mod_delayed_work(system_power_efficient_wq, &power->vbus_detect, DEBOUNCE_TIME);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(axp20x_usb_power_pm_ops, axp20x_usb_power_suspend,
|
|
axp20x_usb_power_resume);
|
|
|
|
static int configure_iio_channels(struct platform_device *pdev,
|
|
struct axp20x_usb_power *power)
|
|
{
|
|
power->vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v");
|
|
if (IS_ERR(power->vbus_v)) {
|
|
if (PTR_ERR(power->vbus_v) == -ENODEV)
|
|
return -EPROBE_DEFER;
|
|
return PTR_ERR(power->vbus_v);
|
|
}
|
|
|
|
power->vbus_i = devm_iio_channel_get(&pdev->dev, "vbus_i");
|
|
if (IS_ERR(power->vbus_i)) {
|
|
if (PTR_ERR(power->vbus_i) == -ENODEV)
|
|
return -EPROBE_DEFER;
|
|
return PTR_ERR(power->vbus_i);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int configure_adc_registers(struct axp20x_usb_power *power)
|
|
{
|
|
/* Enable vbus voltage and current measurement */
|
|
return regmap_update_bits(power->regmap, AXP20X_ADC_EN1,
|
|
AXP20X_ADC_EN1_VBUS_CURR |
|
|
AXP20X_ADC_EN1_VBUS_VOLT,
|
|
AXP20X_ADC_EN1_VBUS_CURR |
|
|
AXP20X_ADC_EN1_VBUS_VOLT);
|
|
}
|
|
|
|
static int axp20x_usb_power_probe(struct platform_device *pdev)
|
|
{
|
|
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
|
|
struct power_supply_config psy_cfg = {};
|
|
struct axp20x_usb_power *power;
|
|
const struct axp_data *axp_data;
|
|
int i, irq, ret;
|
|
|
|
if (!of_device_is_available(pdev->dev.of_node))
|
|
return -ENODEV;
|
|
|
|
if (!axp20x) {
|
|
dev_err(&pdev->dev, "Parent drvdata not set\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
axp_data = of_device_get_match_data(&pdev->dev);
|
|
|
|
power = devm_kzalloc(&pdev->dev,
|
|
struct_size(power, irqs, axp_data->num_irq_names),
|
|
GFP_KERNEL);
|
|
if (!power)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, power);
|
|
|
|
power->axp20x_id = axp_data->axp20x_id;
|
|
power->regmap = axp20x->regmap;
|
|
power->num_irqs = axp_data->num_irq_names;
|
|
INIT_DELAYED_WORK(&power->vbus_detect, axp20x_usb_power_poll_vbus);
|
|
|
|
if (power->axp20x_id == AXP202_ID) {
|
|
/* Enable vbus valid checking */
|
|
ret = regmap_update_bits(power->regmap, AXP20X_VBUS_MON,
|
|
AXP20X_VBUS_MON_VBUS_VALID,
|
|
AXP20X_VBUS_MON_VBUS_VALID);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (IS_ENABLED(CONFIG_AXP20X_ADC))
|
|
ret = configure_iio_channels(pdev, power);
|
|
else
|
|
ret = configure_adc_registers(power);
|
|
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (power->axp20x_id == AXP813_ID) {
|
|
/* Enable USB Battery Charging specification detection */
|
|
regmap_update_bits(axp20x->regmap, AXP288_BC_GLOBAL,
|
|
AXP813_BC_EN, AXP813_BC_EN);
|
|
}
|
|
|
|
psy_cfg.of_node = pdev->dev.of_node;
|
|
psy_cfg.drv_data = power;
|
|
|
|
power->supply = devm_power_supply_register(&pdev->dev,
|
|
axp_data->power_desc,
|
|
&psy_cfg);
|
|
if (IS_ERR(power->supply))
|
|
return PTR_ERR(power->supply);
|
|
|
|
/* Request irqs after registering, as irqs may trigger immediately */
|
|
for (i = 0; i < axp_data->num_irq_names; i++) {
|
|
irq = platform_get_irq_byname(pdev, axp_data->irq_names[i]);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "No IRQ for %s: %d\n",
|
|
axp_data->irq_names[i], irq);
|
|
return irq;
|
|
}
|
|
power->irqs[i] = regmap_irq_get_virq(axp20x->regmap_irqc, irq);
|
|
ret = devm_request_any_context_irq(&pdev->dev, power->irqs[i],
|
|
axp20x_usb_power_irq, 0,
|
|
DRVNAME, power);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Error requesting %s IRQ: %d\n",
|
|
axp_data->irq_names[i], ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (axp20x_usb_vbus_needs_polling(power))
|
|
queue_delayed_work(system_power_efficient_wq, &power->vbus_detect, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axp20x_usb_power_remove(struct platform_device *pdev)
|
|
{
|
|
struct axp20x_usb_power *power = platform_get_drvdata(pdev);
|
|
|
|
cancel_delayed_work_sync(&power->vbus_detect);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id axp20x_usb_power_match[] = {
|
|
{
|
|
.compatible = "x-powers,axp202-usb-power-supply",
|
|
.data = &axp202_data,
|
|
}, {
|
|
.compatible = "x-powers,axp221-usb-power-supply",
|
|
.data = &axp221_data,
|
|
}, {
|
|
.compatible = "x-powers,axp223-usb-power-supply",
|
|
.data = &axp223_data,
|
|
}, {
|
|
.compatible = "x-powers,axp813-usb-power-supply",
|
|
.data = &axp813_data,
|
|
}, { /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, axp20x_usb_power_match);
|
|
|
|
static struct platform_driver axp20x_usb_power_driver = {
|
|
.probe = axp20x_usb_power_probe,
|
|
.remove = axp20x_usb_power_remove,
|
|
.driver = {
|
|
.name = DRVNAME,
|
|
.of_match_table = axp20x_usb_power_match,
|
|
.pm = &axp20x_usb_power_pm_ops,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(axp20x_usb_power_driver);
|
|
|
|
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
|
|
MODULE_DESCRIPTION("AXP20x PMIC USB power supply status driver");
|
|
MODULE_LICENSE("GPL");
|