OpenCloudOS-Kernel/arch/powerpc/platforms
Shaveta Leekha af7837c78d powerpc/fsl-booke: Add B4_QDS board support
- Add support for B4 board in board file b4_qds.c,
  It is common for B4860, B4420 and B4220QDS as they share same QDS board
- Add B4QDS support in Kconfig and Makefile

B4860QDS is a high-performance computing evaluation, development and
test platform supporting the B4860 QorIQ Power Architecture processor,
with following major features:

    - Four dual-threaded e6500 Power Architecture processors
      organized in one cluster-each core runs up to 1.8 GHz
    - Two DDR3/3L controllers for high-speed memory interface each
      runs at up to 1866.67 MHz
    - CoreNet fabric that fully supports coherency using MESI protocol
      between the e6500 cores, SC3900 FVP cores, memories and
      external interfaces.
    - Data Path Acceleration Architecture having FMAN, QMan, BMan,
      SEC 5.3 and RMAN
    - Large internal cache memory with snooping and stashing capabilities
    - Sixteen 10-GHz SerDes lanes that serve:
        - Two SRIO interfaces. Each supports up to 4 lanes and
          a total of up to 8 lanes
        - Up to 8-lanes Common Public Radio Interface (CPRI) controller
          for glue-less antenna connection
        - Two 10-Gbit Ethernet controllers (10GEC)
        - Six 1G/2.5-Gbit Ethernet controllers for network communications
        - PCI Express controller
        - Debug (Aurora)
    - Various system peripherals

B4420 and B4220 have some differences in comparison to B4860 with fewer
core/clusters(both SC3900 and e6500), fewer DDR controllers,
fewer serdes lanes, fewer SGMII interfaces and reduced target frequencies.

Key differences between B4860 and B4420:
B4420 has:
    - Fewer e6500 cores:
        1 cluster with 2 e6500 cores
    - Fewer SC3900 cores/clusters:
        1 cluster with 2 SC3900 cores per cluster
    - Single DDRC @ 1.6GHz
    - 2 X 4 lane serdes
    - 3 SGMII interfaces
    - no sRIO
    - no 10G

Key differences between B4860 and B4220:
B4220 has:
    - Fewer e6500 cores:
        1 cluster with 1 e6500 core
    - Fewer SC3900 cores/clusters:
        1 cluster with 2 SC3900 cores per cluster
    - Single DDRC @ 1.33GHz
    - 2 X 2 lane serdes
    - 2 SGMII interfaces
    - no sRIO
    - no 10G

Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-10 10:15:30 -05:00
..
8xx Disintegrate asm/system.h for PowerPC 2012-03-28 18:30:02 +01:00
40x powerpc: Add missing NULL terminator to avoid boot panic on PPC40x 2013-01-03 16:45:52 +11:00
44x powerpc/44x: Support OCM(On Chip Memory) for APM821xx SoC and Bluestone board 2013-01-10 15:08:37 +11:00
52xx Merge remote-tracking branch 'agust/next' into next 2013-02-20 11:39:05 +11:00
82xx powerpc/82xx: fix checkpatch warnings for km82xx.c 2013-02-13 07:49:04 -06:00
83xx powerpc/83xx: apply mpc8360e quirk for kmeter1 only when par_io is present 2013-02-13 07:49:07 -06:00
85xx powerpc/fsl-booke: Add B4_QDS board support 2013-04-10 10:15:30 -05:00
86xx Merge branch 'master' into for-next 2013-01-29 10:48:30 +01:00
512x Merge remote-tracking branch 'agust/next' into next 2013-02-20 11:39:05 +11:00
amigaone pcspkr: Cleanup Kconfig dependencies 2011-06-09 15:01:41 +02:00
cell Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2013-02-26 20:16:07 -08:00
chrp POWERPC: drivers: remove __dev* attributes. 2013-01-03 15:57:04 -08:00
embedded6xx powerpc: remove "config MPC10X_OPENPIC" 2013-04-10 10:15:26 -05:00
maple POWERPC: drivers: remove __dev* attributes. 2013-01-03 15:57:04 -08:00
pasemi powerpc/pasemi: Fix crash on reboot 2013-01-29 10:18:14 +11:00
powermac POWERPC: drivers: remove __dev* attributes. 2013-01-03 15:57:04 -08:00
powernv POWERPC: drivers: remove __dev* attributes. 2013-01-03 15:57:04 -08:00
prep powerpc: drop unused Kconfig symbols 2011-10-31 23:39:52 +01:00
ps3 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc 2013-02-23 17:09:55 -08:00
pseries powerpc/pseries/hvcserver: Fix strncpy buffer limit in location code 2013-03-05 16:56:27 +11:00
wsp powerpc: Build kernel with -mcmodel=medium 2013-01-10 17:00:31 +11:00
Kconfig powerpc/fsl: remove the PPC_CLOCK dependency 2013-03-12 16:00:08 -05:00
Kconfig.cputype powerpc/85xx: Add AltiVec support for e6500 2013-03-12 15:59:26 -05:00
Makefile powerpc: Remove the main legacy iSerie platform code 2012-03-09 10:35:11 +11:00
fsl_uli1575.c POWERPC: drivers: remove __dev* attributes. 2013-01-03 15:57:04 -08:00