8732 lines
243 KiB
C
8732 lines
243 KiB
C
/************************************************************************
|
|
* s2io.c: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC
|
|
* Copyright(c) 2002-2007 Neterion Inc.
|
|
*
|
|
* This software may be used and distributed according to the terms of
|
|
* the GNU General Public License (GPL), incorporated herein by reference.
|
|
* Drivers based on or derived from this code fall under the GPL and must
|
|
* retain the authorship, copyright and license notice. This file is not
|
|
* a complete program and may only be used when the entire operating
|
|
* system is licensed under the GPL.
|
|
* See the file COPYING in this distribution for more information.
|
|
*
|
|
* Credits:
|
|
* Jeff Garzik : For pointing out the improper error condition
|
|
* check in the s2io_xmit routine and also some
|
|
* issues in the Tx watch dog function. Also for
|
|
* patiently answering all those innumerable
|
|
* questions regaring the 2.6 porting issues.
|
|
* Stephen Hemminger : Providing proper 2.6 porting mechanism for some
|
|
* macros available only in 2.6 Kernel.
|
|
* Francois Romieu : For pointing out all code part that were
|
|
* deprecated and also styling related comments.
|
|
* Grant Grundler : For helping me get rid of some Architecture
|
|
* dependent code.
|
|
* Christopher Hellwig : Some more 2.6 specific issues in the driver.
|
|
*
|
|
* The module loadable parameters that are supported by the driver and a brief
|
|
* explanation of all the variables.
|
|
*
|
|
* rx_ring_num : This can be used to program the number of receive rings used
|
|
* in the driver.
|
|
* rx_ring_sz: This defines the number of receive blocks each ring can have.
|
|
* This is also an array of size 8.
|
|
* rx_ring_mode: This defines the operation mode of all 8 rings. The valid
|
|
* values are 1, 2.
|
|
* tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver.
|
|
* tx_fifo_len: This too is an array of 8. Each element defines the number of
|
|
* Tx descriptors that can be associated with each corresponding FIFO.
|
|
* intr_type: This defines the type of interrupt. The values can be 0(INTA),
|
|
* 2(MSI_X). Default value is '2(MSI_X)'
|
|
* lro_enable: Specifies whether to enable Large Receive Offload (LRO) or not.
|
|
* Possible values '1' for enable '0' for disable. Default is '0'
|
|
* lro_max_pkts: This parameter defines maximum number of packets can be
|
|
* aggregated as a single large packet
|
|
* napi: This parameter used to enable/disable NAPI (polling Rx)
|
|
* Possible values '1' for enable and '0' for disable. Default is '1'
|
|
* ufo: This parameter used to enable/disable UDP Fragmentation Offload(UFO)
|
|
* Possible values '1' for enable and '0' for disable. Default is '0'
|
|
* vlan_tag_strip: This can be used to enable or disable vlan stripping.
|
|
* Possible values '1' for enable , '0' for disable.
|
|
* Default is '2' - which means disable in promisc mode
|
|
* and enable in non-promiscuous mode.
|
|
* multiq: This parameter used to enable/disable MULTIQUEUE support.
|
|
* Possible values '1' for enable and '0' for disable. Default is '0'
|
|
************************************************************************/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/mdio.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/ioctl.h>
|
|
#include <linux/timex.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/tcp.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/io.h>
|
|
#include <net/tcp.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/div64.h>
|
|
#include <asm/irq.h>
|
|
|
|
/* local include */
|
|
#include "s2io.h"
|
|
#include "s2io-regs.h"
|
|
|
|
#define DRV_VERSION "2.0.26.25"
|
|
|
|
/* S2io Driver name & version. */
|
|
static char s2io_driver_name[] = "Neterion";
|
|
static char s2io_driver_version[] = DRV_VERSION;
|
|
|
|
static int rxd_size[2] = {32, 48};
|
|
static int rxd_count[2] = {127, 85};
|
|
|
|
static inline int RXD_IS_UP2DT(struct RxD_t *rxdp)
|
|
{
|
|
int ret;
|
|
|
|
ret = ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
|
|
(GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK));
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Cards with following subsystem_id have a link state indication
|
|
* problem, 600B, 600C, 600D, 640B, 640C and 640D.
|
|
* macro below identifies these cards given the subsystem_id.
|
|
*/
|
|
#define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \
|
|
(dev_type == XFRAME_I_DEVICE) ? \
|
|
((((subid >= 0x600B) && (subid <= 0x600D)) || \
|
|
((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0
|
|
|
|
#define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
|
|
ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
|
|
|
|
static inline int is_s2io_card_up(const struct s2io_nic *sp)
|
|
{
|
|
return test_bit(__S2IO_STATE_CARD_UP, &sp->state);
|
|
}
|
|
|
|
/* Ethtool related variables and Macros. */
|
|
static const char s2io_gstrings[][ETH_GSTRING_LEN] = {
|
|
"Register test\t(offline)",
|
|
"Eeprom test\t(offline)",
|
|
"Link test\t(online)",
|
|
"RLDRAM test\t(offline)",
|
|
"BIST Test\t(offline)"
|
|
};
|
|
|
|
static const char ethtool_xena_stats_keys[][ETH_GSTRING_LEN] = {
|
|
{"tmac_frms"},
|
|
{"tmac_data_octets"},
|
|
{"tmac_drop_frms"},
|
|
{"tmac_mcst_frms"},
|
|
{"tmac_bcst_frms"},
|
|
{"tmac_pause_ctrl_frms"},
|
|
{"tmac_ttl_octets"},
|
|
{"tmac_ucst_frms"},
|
|
{"tmac_nucst_frms"},
|
|
{"tmac_any_err_frms"},
|
|
{"tmac_ttl_less_fb_octets"},
|
|
{"tmac_vld_ip_octets"},
|
|
{"tmac_vld_ip"},
|
|
{"tmac_drop_ip"},
|
|
{"tmac_icmp"},
|
|
{"tmac_rst_tcp"},
|
|
{"tmac_tcp"},
|
|
{"tmac_udp"},
|
|
{"rmac_vld_frms"},
|
|
{"rmac_data_octets"},
|
|
{"rmac_fcs_err_frms"},
|
|
{"rmac_drop_frms"},
|
|
{"rmac_vld_mcst_frms"},
|
|
{"rmac_vld_bcst_frms"},
|
|
{"rmac_in_rng_len_err_frms"},
|
|
{"rmac_out_rng_len_err_frms"},
|
|
{"rmac_long_frms"},
|
|
{"rmac_pause_ctrl_frms"},
|
|
{"rmac_unsup_ctrl_frms"},
|
|
{"rmac_ttl_octets"},
|
|
{"rmac_accepted_ucst_frms"},
|
|
{"rmac_accepted_nucst_frms"},
|
|
{"rmac_discarded_frms"},
|
|
{"rmac_drop_events"},
|
|
{"rmac_ttl_less_fb_octets"},
|
|
{"rmac_ttl_frms"},
|
|
{"rmac_usized_frms"},
|
|
{"rmac_osized_frms"},
|
|
{"rmac_frag_frms"},
|
|
{"rmac_jabber_frms"},
|
|
{"rmac_ttl_64_frms"},
|
|
{"rmac_ttl_65_127_frms"},
|
|
{"rmac_ttl_128_255_frms"},
|
|
{"rmac_ttl_256_511_frms"},
|
|
{"rmac_ttl_512_1023_frms"},
|
|
{"rmac_ttl_1024_1518_frms"},
|
|
{"rmac_ip"},
|
|
{"rmac_ip_octets"},
|
|
{"rmac_hdr_err_ip"},
|
|
{"rmac_drop_ip"},
|
|
{"rmac_icmp"},
|
|
{"rmac_tcp"},
|
|
{"rmac_udp"},
|
|
{"rmac_err_drp_udp"},
|
|
{"rmac_xgmii_err_sym"},
|
|
{"rmac_frms_q0"},
|
|
{"rmac_frms_q1"},
|
|
{"rmac_frms_q2"},
|
|
{"rmac_frms_q3"},
|
|
{"rmac_frms_q4"},
|
|
{"rmac_frms_q5"},
|
|
{"rmac_frms_q6"},
|
|
{"rmac_frms_q7"},
|
|
{"rmac_full_q0"},
|
|
{"rmac_full_q1"},
|
|
{"rmac_full_q2"},
|
|
{"rmac_full_q3"},
|
|
{"rmac_full_q4"},
|
|
{"rmac_full_q5"},
|
|
{"rmac_full_q6"},
|
|
{"rmac_full_q7"},
|
|
{"rmac_pause_cnt"},
|
|
{"rmac_xgmii_data_err_cnt"},
|
|
{"rmac_xgmii_ctrl_err_cnt"},
|
|
{"rmac_accepted_ip"},
|
|
{"rmac_err_tcp"},
|
|
{"rd_req_cnt"},
|
|
{"new_rd_req_cnt"},
|
|
{"new_rd_req_rtry_cnt"},
|
|
{"rd_rtry_cnt"},
|
|
{"wr_rtry_rd_ack_cnt"},
|
|
{"wr_req_cnt"},
|
|
{"new_wr_req_cnt"},
|
|
{"new_wr_req_rtry_cnt"},
|
|
{"wr_rtry_cnt"},
|
|
{"wr_disc_cnt"},
|
|
{"rd_rtry_wr_ack_cnt"},
|
|
{"txp_wr_cnt"},
|
|
{"txd_rd_cnt"},
|
|
{"txd_wr_cnt"},
|
|
{"rxd_rd_cnt"},
|
|
{"rxd_wr_cnt"},
|
|
{"txf_rd_cnt"},
|
|
{"rxf_wr_cnt"}
|
|
};
|
|
|
|
static const char ethtool_enhanced_stats_keys[][ETH_GSTRING_LEN] = {
|
|
{"rmac_ttl_1519_4095_frms"},
|
|
{"rmac_ttl_4096_8191_frms"},
|
|
{"rmac_ttl_8192_max_frms"},
|
|
{"rmac_ttl_gt_max_frms"},
|
|
{"rmac_osized_alt_frms"},
|
|
{"rmac_jabber_alt_frms"},
|
|
{"rmac_gt_max_alt_frms"},
|
|
{"rmac_vlan_frms"},
|
|
{"rmac_len_discard"},
|
|
{"rmac_fcs_discard"},
|
|
{"rmac_pf_discard"},
|
|
{"rmac_da_discard"},
|
|
{"rmac_red_discard"},
|
|
{"rmac_rts_discard"},
|
|
{"rmac_ingm_full_discard"},
|
|
{"link_fault_cnt"}
|
|
};
|
|
|
|
static const char ethtool_driver_stats_keys[][ETH_GSTRING_LEN] = {
|
|
{"\n DRIVER STATISTICS"},
|
|
{"single_bit_ecc_errs"},
|
|
{"double_bit_ecc_errs"},
|
|
{"parity_err_cnt"},
|
|
{"serious_err_cnt"},
|
|
{"soft_reset_cnt"},
|
|
{"fifo_full_cnt"},
|
|
{"ring_0_full_cnt"},
|
|
{"ring_1_full_cnt"},
|
|
{"ring_2_full_cnt"},
|
|
{"ring_3_full_cnt"},
|
|
{"ring_4_full_cnt"},
|
|
{"ring_5_full_cnt"},
|
|
{"ring_6_full_cnt"},
|
|
{"ring_7_full_cnt"},
|
|
{"alarm_transceiver_temp_high"},
|
|
{"alarm_transceiver_temp_low"},
|
|
{"alarm_laser_bias_current_high"},
|
|
{"alarm_laser_bias_current_low"},
|
|
{"alarm_laser_output_power_high"},
|
|
{"alarm_laser_output_power_low"},
|
|
{"warn_transceiver_temp_high"},
|
|
{"warn_transceiver_temp_low"},
|
|
{"warn_laser_bias_current_high"},
|
|
{"warn_laser_bias_current_low"},
|
|
{"warn_laser_output_power_high"},
|
|
{"warn_laser_output_power_low"},
|
|
{"lro_aggregated_pkts"},
|
|
{"lro_flush_both_count"},
|
|
{"lro_out_of_sequence_pkts"},
|
|
{"lro_flush_due_to_max_pkts"},
|
|
{"lro_avg_aggr_pkts"},
|
|
{"mem_alloc_fail_cnt"},
|
|
{"pci_map_fail_cnt"},
|
|
{"watchdog_timer_cnt"},
|
|
{"mem_allocated"},
|
|
{"mem_freed"},
|
|
{"link_up_cnt"},
|
|
{"link_down_cnt"},
|
|
{"link_up_time"},
|
|
{"link_down_time"},
|
|
{"tx_tcode_buf_abort_cnt"},
|
|
{"tx_tcode_desc_abort_cnt"},
|
|
{"tx_tcode_parity_err_cnt"},
|
|
{"tx_tcode_link_loss_cnt"},
|
|
{"tx_tcode_list_proc_err_cnt"},
|
|
{"rx_tcode_parity_err_cnt"},
|
|
{"rx_tcode_abort_cnt"},
|
|
{"rx_tcode_parity_abort_cnt"},
|
|
{"rx_tcode_rda_fail_cnt"},
|
|
{"rx_tcode_unkn_prot_cnt"},
|
|
{"rx_tcode_fcs_err_cnt"},
|
|
{"rx_tcode_buf_size_err_cnt"},
|
|
{"rx_tcode_rxd_corrupt_cnt"},
|
|
{"rx_tcode_unkn_err_cnt"},
|
|
{"tda_err_cnt"},
|
|
{"pfc_err_cnt"},
|
|
{"pcc_err_cnt"},
|
|
{"tti_err_cnt"},
|
|
{"tpa_err_cnt"},
|
|
{"sm_err_cnt"},
|
|
{"lso_err_cnt"},
|
|
{"mac_tmac_err_cnt"},
|
|
{"mac_rmac_err_cnt"},
|
|
{"xgxs_txgxs_err_cnt"},
|
|
{"xgxs_rxgxs_err_cnt"},
|
|
{"rc_err_cnt"},
|
|
{"prc_pcix_err_cnt"},
|
|
{"rpa_err_cnt"},
|
|
{"rda_err_cnt"},
|
|
{"rti_err_cnt"},
|
|
{"mc_err_cnt"}
|
|
};
|
|
|
|
#define S2IO_XENA_STAT_LEN ARRAY_SIZE(ethtool_xena_stats_keys)
|
|
#define S2IO_ENHANCED_STAT_LEN ARRAY_SIZE(ethtool_enhanced_stats_keys)
|
|
#define S2IO_DRIVER_STAT_LEN ARRAY_SIZE(ethtool_driver_stats_keys)
|
|
|
|
#define XFRAME_I_STAT_LEN (S2IO_XENA_STAT_LEN + S2IO_DRIVER_STAT_LEN)
|
|
#define XFRAME_II_STAT_LEN (XFRAME_I_STAT_LEN + S2IO_ENHANCED_STAT_LEN)
|
|
|
|
#define XFRAME_I_STAT_STRINGS_LEN (XFRAME_I_STAT_LEN * ETH_GSTRING_LEN)
|
|
#define XFRAME_II_STAT_STRINGS_LEN (XFRAME_II_STAT_LEN * ETH_GSTRING_LEN)
|
|
|
|
#define S2IO_TEST_LEN ARRAY_SIZE(s2io_gstrings)
|
|
#define S2IO_STRINGS_LEN (S2IO_TEST_LEN * ETH_GSTRING_LEN)
|
|
|
|
#define S2IO_TIMER_CONF(timer, handle, arg, exp) \
|
|
init_timer(&timer); \
|
|
timer.function = handle; \
|
|
timer.data = (unsigned long)arg; \
|
|
mod_timer(&timer, (jiffies + exp)) \
|
|
|
|
/* copy mac addr to def_mac_addr array */
|
|
static void do_s2io_copy_mac_addr(struct s2io_nic *sp, int offset, u64 mac_addr)
|
|
{
|
|
sp->def_mac_addr[offset].mac_addr[5] = (u8) (mac_addr);
|
|
sp->def_mac_addr[offset].mac_addr[4] = (u8) (mac_addr >> 8);
|
|
sp->def_mac_addr[offset].mac_addr[3] = (u8) (mac_addr >> 16);
|
|
sp->def_mac_addr[offset].mac_addr[2] = (u8) (mac_addr >> 24);
|
|
sp->def_mac_addr[offset].mac_addr[1] = (u8) (mac_addr >> 32);
|
|
sp->def_mac_addr[offset].mac_addr[0] = (u8) (mac_addr >> 40);
|
|
}
|
|
|
|
/* Add the vlan */
|
|
static void s2io_vlan_rx_register(struct net_device *dev,
|
|
struct vlan_group *grp)
|
|
{
|
|
int i;
|
|
struct s2io_nic *nic = netdev_priv(dev);
|
|
unsigned long flags[MAX_TX_FIFOS];
|
|
struct config_param *config = &nic->config;
|
|
struct mac_info *mac_control = &nic->mac_control;
|
|
|
|
for (i = 0; i < config->tx_fifo_num; i++) {
|
|
struct fifo_info *fifo = &mac_control->fifos[i];
|
|
|
|
spin_lock_irqsave(&fifo->tx_lock, flags[i]);
|
|
}
|
|
|
|
nic->vlgrp = grp;
|
|
|
|
for (i = config->tx_fifo_num - 1; i >= 0; i--) {
|
|
struct fifo_info *fifo = &mac_control->fifos[i];
|
|
|
|
spin_unlock_irqrestore(&fifo->tx_lock, flags[i]);
|
|
}
|
|
}
|
|
|
|
/* Unregister the vlan */
|
|
static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
|
|
{
|
|
int i;
|
|
struct s2io_nic *nic = netdev_priv(dev);
|
|
unsigned long flags[MAX_TX_FIFOS];
|
|
struct config_param *config = &nic->config;
|
|
struct mac_info *mac_control = &nic->mac_control;
|
|
|
|
for (i = 0; i < config->tx_fifo_num; i++) {
|
|
struct fifo_info *fifo = &mac_control->fifos[i];
|
|
|
|
spin_lock_irqsave(&fifo->tx_lock, flags[i]);
|
|
}
|
|
|
|
if (nic->vlgrp)
|
|
vlan_group_set_device(nic->vlgrp, vid, NULL);
|
|
|
|
for (i = config->tx_fifo_num - 1; i >= 0; i--) {
|
|
struct fifo_info *fifo = &mac_control->fifos[i];
|
|
|
|
spin_unlock_irqrestore(&fifo->tx_lock, flags[i]);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Constants to be programmed into the Xena's registers, to configure
|
|
* the XAUI.
|
|
*/
|
|
|
|
#define END_SIGN 0x0
|
|
static const u64 herc_act_dtx_cfg[] = {
|
|
/* Set address */
|
|
0x8000051536750000ULL, 0x80000515367500E0ULL,
|
|
/* Write data */
|
|
0x8000051536750004ULL, 0x80000515367500E4ULL,
|
|
/* Set address */
|
|
0x80010515003F0000ULL, 0x80010515003F00E0ULL,
|
|
/* Write data */
|
|
0x80010515003F0004ULL, 0x80010515003F00E4ULL,
|
|
/* Set address */
|
|
0x801205150D440000ULL, 0x801205150D4400E0ULL,
|
|
/* Write data */
|
|
0x801205150D440004ULL, 0x801205150D4400E4ULL,
|
|
/* Set address */
|
|
0x80020515F2100000ULL, 0x80020515F21000E0ULL,
|
|
/* Write data */
|
|
0x80020515F2100004ULL, 0x80020515F21000E4ULL,
|
|
/* Done */
|
|
END_SIGN
|
|
};
|
|
|
|
static const u64 xena_dtx_cfg[] = {
|
|
/* Set address */
|
|
0x8000051500000000ULL, 0x80000515000000E0ULL,
|
|
/* Write data */
|
|
0x80000515D9350004ULL, 0x80000515D93500E4ULL,
|
|
/* Set address */
|
|
0x8001051500000000ULL, 0x80010515000000E0ULL,
|
|
/* Write data */
|
|
0x80010515001E0004ULL, 0x80010515001E00E4ULL,
|
|
/* Set address */
|
|
0x8002051500000000ULL, 0x80020515000000E0ULL,
|
|
/* Write data */
|
|
0x80020515F2100004ULL, 0x80020515F21000E4ULL,
|
|
END_SIGN
|
|
};
|
|
|
|
/*
|
|
* Constants for Fixing the MacAddress problem seen mostly on
|
|
* Alpha machines.
|
|
*/
|
|
static const u64 fix_mac[] = {
|
|
0x0060000000000000ULL, 0x0060600000000000ULL,
|
|
0x0040600000000000ULL, 0x0000600000000000ULL,
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
0x0020600000000000ULL, 0x0000600000000000ULL,
|
|
0x0040600000000000ULL, 0x0060600000000000ULL,
|
|
END_SIGN
|
|
};
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
|
|
/* Module Loadable parameters. */
|
|
S2IO_PARM_INT(tx_fifo_num, FIFO_DEFAULT_NUM);
|
|
S2IO_PARM_INT(rx_ring_num, 1);
|
|
S2IO_PARM_INT(multiq, 0);
|
|
S2IO_PARM_INT(rx_ring_mode, 1);
|
|
S2IO_PARM_INT(use_continuous_tx_intrs, 1);
|
|
S2IO_PARM_INT(rmac_pause_time, 0x100);
|
|
S2IO_PARM_INT(mc_pause_threshold_q0q3, 187);
|
|
S2IO_PARM_INT(mc_pause_threshold_q4q7, 187);
|
|
S2IO_PARM_INT(shared_splits, 0);
|
|
S2IO_PARM_INT(tmac_util_period, 5);
|
|
S2IO_PARM_INT(rmac_util_period, 5);
|
|
S2IO_PARM_INT(l3l4hdr_size, 128);
|
|
/* 0 is no steering, 1 is Priority steering, 2 is Default steering */
|
|
S2IO_PARM_INT(tx_steering_type, TX_DEFAULT_STEERING);
|
|
/* Frequency of Rx desc syncs expressed as power of 2 */
|
|
S2IO_PARM_INT(rxsync_frequency, 3);
|
|
/* Interrupt type. Values can be 0(INTA), 2(MSI_X) */
|
|
S2IO_PARM_INT(intr_type, 2);
|
|
/* Large receive offload feature */
|
|
static unsigned int lro_enable;
|
|
module_param_named(lro, lro_enable, uint, 0);
|
|
|
|
/* Max pkts to be aggregated by LRO at one time. If not specified,
|
|
* aggregation happens until we hit max IP pkt size(64K)
|
|
*/
|
|
S2IO_PARM_INT(lro_max_pkts, 0xFFFF);
|
|
S2IO_PARM_INT(indicate_max_pkts, 0);
|
|
|
|
S2IO_PARM_INT(napi, 1);
|
|
S2IO_PARM_INT(ufo, 0);
|
|
S2IO_PARM_INT(vlan_tag_strip, NO_STRIP_IN_PROMISC);
|
|
|
|
static unsigned int tx_fifo_len[MAX_TX_FIFOS] =
|
|
{DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN};
|
|
static unsigned int rx_ring_sz[MAX_RX_RINGS] =
|
|
{[0 ...(MAX_RX_RINGS - 1)] = SMALL_BLK_CNT};
|
|
static unsigned int rts_frm_len[MAX_RX_RINGS] =
|
|
{[0 ...(MAX_RX_RINGS - 1)] = 0 };
|
|
|
|
module_param_array(tx_fifo_len, uint, NULL, 0);
|
|
module_param_array(rx_ring_sz, uint, NULL, 0);
|
|
module_param_array(rts_frm_len, uint, NULL, 0);
|
|
|
|
/*
|
|
* S2IO device table.
|
|
* This table lists all the devices that this driver supports.
|
|
*/
|
|
static struct pci_device_id s2io_tbl[] __devinitdata = {
|
|
{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN,
|
|
PCI_ANY_ID, PCI_ANY_ID},
|
|
{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI,
|
|
PCI_ANY_ID, PCI_ANY_ID},
|
|
{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN,
|
|
PCI_ANY_ID, PCI_ANY_ID},
|
|
{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
|
|
PCI_ANY_ID, PCI_ANY_ID},
|
|
{0,}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, s2io_tbl);
|
|
|
|
static struct pci_error_handlers s2io_err_handler = {
|
|
.error_detected = s2io_io_error_detected,
|
|
.slot_reset = s2io_io_slot_reset,
|
|
.resume = s2io_io_resume,
|
|
};
|
|
|
|
static struct pci_driver s2io_driver = {
|
|
.name = "S2IO",
|
|
.id_table = s2io_tbl,
|
|
.probe = s2io_init_nic,
|
|
.remove = __devexit_p(s2io_rem_nic),
|
|
.err_handler = &s2io_err_handler,
|
|
};
|
|
|
|
/* A simplifier macro used both by init and free shared_mem Fns(). */
|
|
#define TXD_MEM_PAGE_CNT(len, per_each) ((len+per_each - 1) / per_each)
|
|
|
|
/* netqueue manipulation helper functions */
|
|
static inline void s2io_stop_all_tx_queue(struct s2io_nic *sp)
|
|
{
|
|
if (!sp->config.multiq) {
|
|
int i;
|
|
|
|
for (i = 0; i < sp->config.tx_fifo_num; i++)
|
|
sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_STOP;
|
|
}
|
|
netif_tx_stop_all_queues(sp->dev);
|
|
}
|
|
|
|
static inline void s2io_stop_tx_queue(struct s2io_nic *sp, int fifo_no)
|
|
{
|
|
if (!sp->config.multiq)
|
|
sp->mac_control.fifos[fifo_no].queue_state =
|
|
FIFO_QUEUE_STOP;
|
|
|
|
netif_tx_stop_all_queues(sp->dev);
|
|
}
|
|
|
|
static inline void s2io_start_all_tx_queue(struct s2io_nic *sp)
|
|
{
|
|
if (!sp->config.multiq) {
|
|
int i;
|
|
|
|
for (i = 0; i < sp->config.tx_fifo_num; i++)
|
|
sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
|
|
}
|
|
netif_tx_start_all_queues(sp->dev);
|
|
}
|
|
|
|
static inline void s2io_start_tx_queue(struct s2io_nic *sp, int fifo_no)
|
|
{
|
|
if (!sp->config.multiq)
|
|
sp->mac_control.fifos[fifo_no].queue_state =
|
|
FIFO_QUEUE_START;
|
|
|
|
netif_tx_start_all_queues(sp->dev);
|
|
}
|
|
|
|
static inline void s2io_wake_all_tx_queue(struct s2io_nic *sp)
|
|
{
|
|
if (!sp->config.multiq) {
|
|
int i;
|
|
|
|
for (i = 0; i < sp->config.tx_fifo_num; i++)
|
|
sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
|
|
}
|
|
netif_tx_wake_all_queues(sp->dev);
|
|
}
|
|
|
|
static inline void s2io_wake_tx_queue(
|
|
struct fifo_info *fifo, int cnt, u8 multiq)
|
|
{
|
|
|
|
if (multiq) {
|
|
if (cnt && __netif_subqueue_stopped(fifo->dev, fifo->fifo_no))
|
|
netif_wake_subqueue(fifo->dev, fifo->fifo_no);
|
|
} else if (cnt && (fifo->queue_state == FIFO_QUEUE_STOP)) {
|
|
if (netif_queue_stopped(fifo->dev)) {
|
|
fifo->queue_state = FIFO_QUEUE_START;
|
|
netif_wake_queue(fifo->dev);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* init_shared_mem - Allocation and Initialization of Memory
|
|
* @nic: Device private variable.
|
|
* Description: The function allocates all the memory areas shared
|
|
* between the NIC and the driver. This includes Tx descriptors,
|
|
* Rx descriptors and the statistics block.
|
|
*/
|
|
|
|
static int init_shared_mem(struct s2io_nic *nic)
|
|
{
|
|
u32 size;
|
|
void *tmp_v_addr, *tmp_v_addr_next;
|
|
dma_addr_t tmp_p_addr, tmp_p_addr_next;
|
|
struct RxD_block *pre_rxd_blk = NULL;
|
|
int i, j, blk_cnt;
|
|
int lst_size, lst_per_page;
|
|
struct net_device *dev = nic->dev;
|
|
unsigned long tmp;
|
|
struct buffAdd *ba;
|
|
struct config_param *config = &nic->config;
|
|
struct mac_info *mac_control = &nic->mac_control;
|
|
unsigned long long mem_allocated = 0;
|
|
|
|
/* Allocation and initialization of TXDLs in FIFOs */
|
|
size = 0;
|
|
for (i = 0; i < config->tx_fifo_num; i++) {
|
|
struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
|
|
|
|
size += tx_cfg->fifo_len;
|
|
}
|
|
if (size > MAX_AVAILABLE_TXDS) {
|
|
DBG_PRINT(ERR_DBG,
|
|
"Too many TxDs requested: %d, max supported: %d\n",
|
|
size, MAX_AVAILABLE_TXDS);
|
|
return -EINVAL;
|
|
}
|
|
|
|
size = 0;
|
|
for (i = 0; i < config->tx_fifo_num; i++) {
|
|
struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
|
|
|
|
size = tx_cfg->fifo_len;
|
|
/*
|
|
* Legal values are from 2 to 8192
|
|
*/
|
|
if (size < 2) {
|
|
DBG_PRINT(ERR_DBG, "Fifo %d: Invalid length (%d) - "
|
|
"Valid lengths are 2 through 8192\n",
|
|
i, size);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
lst_size = (sizeof(struct TxD) * config->max_txds);
|
|
lst_per_page = PAGE_SIZE / lst_size;
|
|
|
|
for (i = 0; i < config->tx_fifo_num; i++) {
|
|
struct fifo_info *fifo = &mac_control->fifos[i];
|
|
struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
|
|
int fifo_len = tx_cfg->fifo_len;
|
|
int list_holder_size = fifo_len * sizeof(struct list_info_hold);
|
|
|
|
fifo->list_info = kzalloc(list_holder_size, GFP_KERNEL);
|
|
if (!fifo->list_info) {
|
|
DBG_PRINT(INFO_DBG, "Malloc failed for list_info\n");
|
|
return -ENOMEM;
|
|
}
|
|
mem_allocated += list_holder_size;
|
|
}
|
|
for (i = 0; i < config->tx_fifo_num; i++) {
|
|
int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
|
|
lst_per_page);
|
|
struct fifo_info *fifo = &mac_control->fifos[i];
|
|
struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
|
|
|
|
fifo->tx_curr_put_info.offset = 0;
|
|
fifo->tx_curr_put_info.fifo_len = tx_cfg->fifo_len - 1;
|
|
fifo->tx_curr_get_info.offset = 0;
|
|
fifo->tx_curr_get_info.fifo_len = tx_cfg->fifo_len - 1;
|
|
fifo->fifo_no = i;
|
|
fifo->nic = nic;
|
|
fifo->max_txds = MAX_SKB_FRAGS + 2;
|
|
fifo->dev = dev;
|
|
|
|
for (j = 0; j < page_num; j++) {
|
|
int k = 0;
|
|
dma_addr_t tmp_p;
|
|
void *tmp_v;
|
|
tmp_v = pci_alloc_consistent(nic->pdev,
|
|
PAGE_SIZE, &tmp_p);
|
|
if (!tmp_v) {
|
|
DBG_PRINT(INFO_DBG,
|
|
"pci_alloc_consistent failed for TxDL\n");
|
|
return -ENOMEM;
|
|
}
|
|
/* If we got a zero DMA address(can happen on
|
|
* certain platforms like PPC), reallocate.
|
|
* Store virtual address of page we don't want,
|
|
* to be freed later.
|
|
*/
|
|
if (!tmp_p) {
|
|
mac_control->zerodma_virt_addr = tmp_v;
|
|
DBG_PRINT(INIT_DBG,
|
|
"%s: Zero DMA address for TxDL. "
|
|
"Virtual address %p\n",
|
|
dev->name, tmp_v);
|
|
tmp_v = pci_alloc_consistent(nic->pdev,
|
|
PAGE_SIZE, &tmp_p);
|
|
if (!tmp_v) {
|
|
DBG_PRINT(INFO_DBG,
|
|
"pci_alloc_consistent failed for TxDL\n");
|
|
return -ENOMEM;
|
|
}
|
|
mem_allocated += PAGE_SIZE;
|
|
}
|
|
while (k < lst_per_page) {
|
|
int l = (j * lst_per_page) + k;
|
|
if (l == tx_cfg->fifo_len)
|
|
break;
|
|
fifo->list_info[l].list_virt_addr =
|
|
tmp_v + (k * lst_size);
|
|
fifo->list_info[l].list_phy_addr =
|
|
tmp_p + (k * lst_size);
|
|
k++;
|
|
}
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < config->tx_fifo_num; i++) {
|
|
struct fifo_info *fifo = &mac_control->fifos[i];
|
|
struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
|
|
|
|
size = tx_cfg->fifo_len;
|
|
fifo->ufo_in_band_v = kcalloc(size, sizeof(u64), GFP_KERNEL);
|
|
if (!fifo->ufo_in_band_v)
|
|
return -ENOMEM;
|
|
mem_allocated += (size * sizeof(u64));
|
|
}
|
|
|
|
/* Allocation and initialization of RXDs in Rings */
|
|
size = 0;
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
|
|
struct ring_info *ring = &mac_control->rings[i];
|
|
|
|
if (rx_cfg->num_rxd % (rxd_count[nic->rxd_mode] + 1)) {
|
|
DBG_PRINT(ERR_DBG, "%s: Ring%d RxD count is not a "
|
|
"multiple of RxDs per Block\n",
|
|
dev->name, i);
|
|
return FAILURE;
|
|
}
|
|
size += rx_cfg->num_rxd;
|
|
ring->block_count = rx_cfg->num_rxd /
|
|
(rxd_count[nic->rxd_mode] + 1);
|
|
ring->pkt_cnt = rx_cfg->num_rxd - ring->block_count;
|
|
}
|
|
if (nic->rxd_mode == RXD_MODE_1)
|
|
size = (size * (sizeof(struct RxD1)));
|
|
else
|
|
size = (size * (sizeof(struct RxD3)));
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
|
|
struct ring_info *ring = &mac_control->rings[i];
|
|
|
|
ring->rx_curr_get_info.block_index = 0;
|
|
ring->rx_curr_get_info.offset = 0;
|
|
ring->rx_curr_get_info.ring_len = rx_cfg->num_rxd - 1;
|
|
ring->rx_curr_put_info.block_index = 0;
|
|
ring->rx_curr_put_info.offset = 0;
|
|
ring->rx_curr_put_info.ring_len = rx_cfg->num_rxd - 1;
|
|
ring->nic = nic;
|
|
ring->ring_no = i;
|
|
ring->lro = lro_enable;
|
|
|
|
blk_cnt = rx_cfg->num_rxd / (rxd_count[nic->rxd_mode] + 1);
|
|
/* Allocating all the Rx blocks */
|
|
for (j = 0; j < blk_cnt; j++) {
|
|
struct rx_block_info *rx_blocks;
|
|
int l;
|
|
|
|
rx_blocks = &ring->rx_blocks[j];
|
|
size = SIZE_OF_BLOCK; /* size is always page size */
|
|
tmp_v_addr = pci_alloc_consistent(nic->pdev, size,
|
|
&tmp_p_addr);
|
|
if (tmp_v_addr == NULL) {
|
|
/*
|
|
* In case of failure, free_shared_mem()
|
|
* is called, which should free any
|
|
* memory that was alloced till the
|
|
* failure happened.
|
|
*/
|
|
rx_blocks->block_virt_addr = tmp_v_addr;
|
|
return -ENOMEM;
|
|
}
|
|
mem_allocated += size;
|
|
memset(tmp_v_addr, 0, size);
|
|
|
|
size = sizeof(struct rxd_info) *
|
|
rxd_count[nic->rxd_mode];
|
|
rx_blocks->block_virt_addr = tmp_v_addr;
|
|
rx_blocks->block_dma_addr = tmp_p_addr;
|
|
rx_blocks->rxds = kmalloc(size, GFP_KERNEL);
|
|
if (!rx_blocks->rxds)
|
|
return -ENOMEM;
|
|
mem_allocated += size;
|
|
for (l = 0; l < rxd_count[nic->rxd_mode]; l++) {
|
|
rx_blocks->rxds[l].virt_addr =
|
|
rx_blocks->block_virt_addr +
|
|
(rxd_size[nic->rxd_mode] * l);
|
|
rx_blocks->rxds[l].dma_addr =
|
|
rx_blocks->block_dma_addr +
|
|
(rxd_size[nic->rxd_mode] * l);
|
|
}
|
|
}
|
|
/* Interlinking all Rx Blocks */
|
|
for (j = 0; j < blk_cnt; j++) {
|
|
int next = (j + 1) % blk_cnt;
|
|
tmp_v_addr = ring->rx_blocks[j].block_virt_addr;
|
|
tmp_v_addr_next = ring->rx_blocks[next].block_virt_addr;
|
|
tmp_p_addr = ring->rx_blocks[j].block_dma_addr;
|
|
tmp_p_addr_next = ring->rx_blocks[next].block_dma_addr;
|
|
|
|
pre_rxd_blk = (struct RxD_block *)tmp_v_addr;
|
|
pre_rxd_blk->reserved_2_pNext_RxD_block =
|
|
(unsigned long)tmp_v_addr_next;
|
|
pre_rxd_blk->pNext_RxD_Blk_physical =
|
|
(u64)tmp_p_addr_next;
|
|
}
|
|
}
|
|
if (nic->rxd_mode == RXD_MODE_3B) {
|
|
/*
|
|
* Allocation of Storages for buffer addresses in 2BUFF mode
|
|
* and the buffers as well.
|
|
*/
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
|
|
struct ring_info *ring = &mac_control->rings[i];
|
|
|
|
blk_cnt = rx_cfg->num_rxd /
|
|
(rxd_count[nic->rxd_mode] + 1);
|
|
size = sizeof(struct buffAdd *) * blk_cnt;
|
|
ring->ba = kmalloc(size, GFP_KERNEL);
|
|
if (!ring->ba)
|
|
return -ENOMEM;
|
|
mem_allocated += size;
|
|
for (j = 0; j < blk_cnt; j++) {
|
|
int k = 0;
|
|
|
|
size = sizeof(struct buffAdd) *
|
|
(rxd_count[nic->rxd_mode] + 1);
|
|
ring->ba[j] = kmalloc(size, GFP_KERNEL);
|
|
if (!ring->ba[j])
|
|
return -ENOMEM;
|
|
mem_allocated += size;
|
|
while (k != rxd_count[nic->rxd_mode]) {
|
|
ba = &ring->ba[j][k];
|
|
size = BUF0_LEN + ALIGN_SIZE;
|
|
ba->ba_0_org = kmalloc(size, GFP_KERNEL);
|
|
if (!ba->ba_0_org)
|
|
return -ENOMEM;
|
|
mem_allocated += size;
|
|
tmp = (unsigned long)ba->ba_0_org;
|
|
tmp += ALIGN_SIZE;
|
|
tmp &= ~((unsigned long)ALIGN_SIZE);
|
|
ba->ba_0 = (void *)tmp;
|
|
|
|
size = BUF1_LEN + ALIGN_SIZE;
|
|
ba->ba_1_org = kmalloc(size, GFP_KERNEL);
|
|
if (!ba->ba_1_org)
|
|
return -ENOMEM;
|
|
mem_allocated += size;
|
|
tmp = (unsigned long)ba->ba_1_org;
|
|
tmp += ALIGN_SIZE;
|
|
tmp &= ~((unsigned long)ALIGN_SIZE);
|
|
ba->ba_1 = (void *)tmp;
|
|
k++;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Allocation and initialization of Statistics block */
|
|
size = sizeof(struct stat_block);
|
|
mac_control->stats_mem =
|
|
pci_alloc_consistent(nic->pdev, size,
|
|
&mac_control->stats_mem_phy);
|
|
|
|
if (!mac_control->stats_mem) {
|
|
/*
|
|
* In case of failure, free_shared_mem() is called, which
|
|
* should free any memory that was alloced till the
|
|
* failure happened.
|
|
*/
|
|
return -ENOMEM;
|
|
}
|
|
mem_allocated += size;
|
|
mac_control->stats_mem_sz = size;
|
|
|
|
tmp_v_addr = mac_control->stats_mem;
|
|
mac_control->stats_info = (struct stat_block *)tmp_v_addr;
|
|
memset(tmp_v_addr, 0, size);
|
|
DBG_PRINT(INIT_DBG, "%s: Ring Mem PHY: 0x%llx\n", dev->name,
|
|
(unsigned long long)tmp_p_addr);
|
|
mac_control->stats_info->sw_stat.mem_allocated += mem_allocated;
|
|
return SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* free_shared_mem - Free the allocated Memory
|
|
* @nic: Device private variable.
|
|
* Description: This function is to free all memory locations allocated by
|
|
* the init_shared_mem() function and return it to the kernel.
|
|
*/
|
|
|
|
static void free_shared_mem(struct s2io_nic *nic)
|
|
{
|
|
int i, j, blk_cnt, size;
|
|
void *tmp_v_addr;
|
|
dma_addr_t tmp_p_addr;
|
|
int lst_size, lst_per_page;
|
|
struct net_device *dev;
|
|
int page_num = 0;
|
|
struct config_param *config;
|
|
struct mac_info *mac_control;
|
|
struct stat_block *stats;
|
|
struct swStat *swstats;
|
|
|
|
if (!nic)
|
|
return;
|
|
|
|
dev = nic->dev;
|
|
|
|
config = &nic->config;
|
|
mac_control = &nic->mac_control;
|
|
stats = mac_control->stats_info;
|
|
swstats = &stats->sw_stat;
|
|
|
|
lst_size = sizeof(struct TxD) * config->max_txds;
|
|
lst_per_page = PAGE_SIZE / lst_size;
|
|
|
|
for (i = 0; i < config->tx_fifo_num; i++) {
|
|
struct fifo_info *fifo = &mac_control->fifos[i];
|
|
struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
|
|
|
|
page_num = TXD_MEM_PAGE_CNT(tx_cfg->fifo_len, lst_per_page);
|
|
for (j = 0; j < page_num; j++) {
|
|
int mem_blks = (j * lst_per_page);
|
|
struct list_info_hold *fli;
|
|
|
|
if (!fifo->list_info)
|
|
return;
|
|
|
|
fli = &fifo->list_info[mem_blks];
|
|
if (!fli->list_virt_addr)
|
|
break;
|
|
pci_free_consistent(nic->pdev, PAGE_SIZE,
|
|
fli->list_virt_addr,
|
|
fli->list_phy_addr);
|
|
swstats->mem_freed += PAGE_SIZE;
|
|
}
|
|
/* If we got a zero DMA address during allocation,
|
|
* free the page now
|
|
*/
|
|
if (mac_control->zerodma_virt_addr) {
|
|
pci_free_consistent(nic->pdev, PAGE_SIZE,
|
|
mac_control->zerodma_virt_addr,
|
|
(dma_addr_t)0);
|
|
DBG_PRINT(INIT_DBG,
|
|
"%s: Freeing TxDL with zero DMA address. "
|
|
"Virtual address %p\n",
|
|
dev->name, mac_control->zerodma_virt_addr);
|
|
swstats->mem_freed += PAGE_SIZE;
|
|
}
|
|
kfree(fifo->list_info);
|
|
swstats->mem_freed += tx_cfg->fifo_len *
|
|
sizeof(struct list_info_hold);
|
|
}
|
|
|
|
size = SIZE_OF_BLOCK;
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
struct ring_info *ring = &mac_control->rings[i];
|
|
|
|
blk_cnt = ring->block_count;
|
|
for (j = 0; j < blk_cnt; j++) {
|
|
tmp_v_addr = ring->rx_blocks[j].block_virt_addr;
|
|
tmp_p_addr = ring->rx_blocks[j].block_dma_addr;
|
|
if (tmp_v_addr == NULL)
|
|
break;
|
|
pci_free_consistent(nic->pdev, size,
|
|
tmp_v_addr, tmp_p_addr);
|
|
swstats->mem_freed += size;
|
|
kfree(ring->rx_blocks[j].rxds);
|
|
swstats->mem_freed += sizeof(struct rxd_info) *
|
|
rxd_count[nic->rxd_mode];
|
|
}
|
|
}
|
|
|
|
if (nic->rxd_mode == RXD_MODE_3B) {
|
|
/* Freeing buffer storage addresses in 2BUFF mode. */
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
|
|
struct ring_info *ring = &mac_control->rings[i];
|
|
|
|
blk_cnt = rx_cfg->num_rxd /
|
|
(rxd_count[nic->rxd_mode] + 1);
|
|
for (j = 0; j < blk_cnt; j++) {
|
|
int k = 0;
|
|
if (!ring->ba[j])
|
|
continue;
|
|
while (k != rxd_count[nic->rxd_mode]) {
|
|
struct buffAdd *ba = &ring->ba[j][k];
|
|
kfree(ba->ba_0_org);
|
|
swstats->mem_freed +=
|
|
BUF0_LEN + ALIGN_SIZE;
|
|
kfree(ba->ba_1_org);
|
|
swstats->mem_freed +=
|
|
BUF1_LEN + ALIGN_SIZE;
|
|
k++;
|
|
}
|
|
kfree(ring->ba[j]);
|
|
swstats->mem_freed += sizeof(struct buffAdd) *
|
|
(rxd_count[nic->rxd_mode] + 1);
|
|
}
|
|
kfree(ring->ba);
|
|
swstats->mem_freed += sizeof(struct buffAdd *) *
|
|
blk_cnt;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < nic->config.tx_fifo_num; i++) {
|
|
struct fifo_info *fifo = &mac_control->fifos[i];
|
|
struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
|
|
|
|
if (fifo->ufo_in_band_v) {
|
|
swstats->mem_freed += tx_cfg->fifo_len *
|
|
sizeof(u64);
|
|
kfree(fifo->ufo_in_band_v);
|
|
}
|
|
}
|
|
|
|
if (mac_control->stats_mem) {
|
|
swstats->mem_freed += mac_control->stats_mem_sz;
|
|
pci_free_consistent(nic->pdev,
|
|
mac_control->stats_mem_sz,
|
|
mac_control->stats_mem,
|
|
mac_control->stats_mem_phy);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* s2io_verify_pci_mode -
|
|
*/
|
|
|
|
static int s2io_verify_pci_mode(struct s2io_nic *nic)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = nic->bar0;
|
|
register u64 val64 = 0;
|
|
int mode;
|
|
|
|
val64 = readq(&bar0->pci_mode);
|
|
mode = (u8)GET_PCI_MODE(val64);
|
|
|
|
if (val64 & PCI_MODE_UNKNOWN_MODE)
|
|
return -1; /* Unknown PCI mode */
|
|
return mode;
|
|
}
|
|
|
|
#define NEC_VENID 0x1033
|
|
#define NEC_DEVID 0x0125
|
|
static int s2io_on_nec_bridge(struct pci_dev *s2io_pdev)
|
|
{
|
|
struct pci_dev *tdev = NULL;
|
|
while ((tdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, tdev)) != NULL) {
|
|
if (tdev->vendor == NEC_VENID && tdev->device == NEC_DEVID) {
|
|
if (tdev->bus == s2io_pdev->bus->parent) {
|
|
pci_dev_put(tdev);
|
|
return 1;
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int bus_speed[8] = {33, 133, 133, 200, 266, 133, 200, 266};
|
|
/**
|
|
* s2io_print_pci_mode -
|
|
*/
|
|
static int s2io_print_pci_mode(struct s2io_nic *nic)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = nic->bar0;
|
|
register u64 val64 = 0;
|
|
int mode;
|
|
struct config_param *config = &nic->config;
|
|
const char *pcimode;
|
|
|
|
val64 = readq(&bar0->pci_mode);
|
|
mode = (u8)GET_PCI_MODE(val64);
|
|
|
|
if (val64 & PCI_MODE_UNKNOWN_MODE)
|
|
return -1; /* Unknown PCI mode */
|
|
|
|
config->bus_speed = bus_speed[mode];
|
|
|
|
if (s2io_on_nec_bridge(nic->pdev)) {
|
|
DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n",
|
|
nic->dev->name);
|
|
return mode;
|
|
}
|
|
|
|
switch (mode) {
|
|
case PCI_MODE_PCI_33:
|
|
pcimode = "33MHz PCI bus";
|
|
break;
|
|
case PCI_MODE_PCI_66:
|
|
pcimode = "66MHz PCI bus";
|
|
break;
|
|
case PCI_MODE_PCIX_M1_66:
|
|
pcimode = "66MHz PCIX(M1) bus";
|
|
break;
|
|
case PCI_MODE_PCIX_M1_100:
|
|
pcimode = "100MHz PCIX(M1) bus";
|
|
break;
|
|
case PCI_MODE_PCIX_M1_133:
|
|
pcimode = "133MHz PCIX(M1) bus";
|
|
break;
|
|
case PCI_MODE_PCIX_M2_66:
|
|
pcimode = "133MHz PCIX(M2) bus";
|
|
break;
|
|
case PCI_MODE_PCIX_M2_100:
|
|
pcimode = "200MHz PCIX(M2) bus";
|
|
break;
|
|
case PCI_MODE_PCIX_M2_133:
|
|
pcimode = "266MHz PCIX(M2) bus";
|
|
break;
|
|
default:
|
|
pcimode = "unsupported bus!";
|
|
mode = -1;
|
|
}
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Device is on %d bit %s\n",
|
|
nic->dev->name, val64 & PCI_MODE_32_BITS ? 32 : 64, pcimode);
|
|
|
|
return mode;
|
|
}
|
|
|
|
/**
|
|
* init_tti - Initialization transmit traffic interrupt scheme
|
|
* @nic: device private variable
|
|
* @link: link status (UP/DOWN) used to enable/disable continuous
|
|
* transmit interrupts
|
|
* Description: The function configures transmit traffic interrupts
|
|
* Return Value: SUCCESS on success and
|
|
* '-1' on failure
|
|
*/
|
|
|
|
static int init_tti(struct s2io_nic *nic, int link)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = nic->bar0;
|
|
register u64 val64 = 0;
|
|
int i;
|
|
struct config_param *config = &nic->config;
|
|
|
|
for (i = 0; i < config->tx_fifo_num; i++) {
|
|
/*
|
|
* TTI Initialization. Default Tx timer gets us about
|
|
* 250 interrupts per sec. Continuous interrupts are enabled
|
|
* by default.
|
|
*/
|
|
if (nic->device_type == XFRAME_II_DEVICE) {
|
|
int count = (nic->config.bus_speed * 125)/2;
|
|
val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count);
|
|
} else
|
|
val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078);
|
|
|
|
val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) |
|
|
TTI_DATA1_MEM_TX_URNG_B(0x10) |
|
|
TTI_DATA1_MEM_TX_URNG_C(0x30) |
|
|
TTI_DATA1_MEM_TX_TIMER_AC_EN;
|
|
if (i == 0)
|
|
if (use_continuous_tx_intrs && (link == LINK_UP))
|
|
val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
|
|
writeq(val64, &bar0->tti_data1_mem);
|
|
|
|
if (nic->config.intr_type == MSI_X) {
|
|
val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
|
|
TTI_DATA2_MEM_TX_UFC_B(0x100) |
|
|
TTI_DATA2_MEM_TX_UFC_C(0x200) |
|
|
TTI_DATA2_MEM_TX_UFC_D(0x300);
|
|
} else {
|
|
if ((nic->config.tx_steering_type ==
|
|
TX_DEFAULT_STEERING) &&
|
|
(config->tx_fifo_num > 1) &&
|
|
(i >= nic->udp_fifo_idx) &&
|
|
(i < (nic->udp_fifo_idx +
|
|
nic->total_udp_fifos)))
|
|
val64 = TTI_DATA2_MEM_TX_UFC_A(0x50) |
|
|
TTI_DATA2_MEM_TX_UFC_B(0x80) |
|
|
TTI_DATA2_MEM_TX_UFC_C(0x100) |
|
|
TTI_DATA2_MEM_TX_UFC_D(0x120);
|
|
else
|
|
val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
|
|
TTI_DATA2_MEM_TX_UFC_B(0x20) |
|
|
TTI_DATA2_MEM_TX_UFC_C(0x40) |
|
|
TTI_DATA2_MEM_TX_UFC_D(0x80);
|
|
}
|
|
|
|
writeq(val64, &bar0->tti_data2_mem);
|
|
|
|
val64 = TTI_CMD_MEM_WE |
|
|
TTI_CMD_MEM_STROBE_NEW_CMD |
|
|
TTI_CMD_MEM_OFFSET(i);
|
|
writeq(val64, &bar0->tti_command_mem);
|
|
|
|
if (wait_for_cmd_complete(&bar0->tti_command_mem,
|
|
TTI_CMD_MEM_STROBE_NEW_CMD,
|
|
S2IO_BIT_RESET) != SUCCESS)
|
|
return FAILURE;
|
|
}
|
|
|
|
return SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* init_nic - Initialization of hardware
|
|
* @nic: device private variable
|
|
* Description: The function sequentially configures every block
|
|
* of the H/W from their reset values.
|
|
* Return Value: SUCCESS on success and
|
|
* '-1' on failure (endian settings incorrect).
|
|
*/
|
|
|
|
static int init_nic(struct s2io_nic *nic)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = nic->bar0;
|
|
struct net_device *dev = nic->dev;
|
|
register u64 val64 = 0;
|
|
void __iomem *add;
|
|
u32 time;
|
|
int i, j;
|
|
int dtx_cnt = 0;
|
|
unsigned long long mem_share;
|
|
int mem_size;
|
|
struct config_param *config = &nic->config;
|
|
struct mac_info *mac_control = &nic->mac_control;
|
|
|
|
/* to set the swapper controle on the card */
|
|
if (s2io_set_swapper(nic)) {
|
|
DBG_PRINT(ERR_DBG, "ERROR: Setting Swapper failed\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* Herc requires EOI to be removed from reset before XGXS, so..
|
|
*/
|
|
if (nic->device_type & XFRAME_II_DEVICE) {
|
|
val64 = 0xA500000000ULL;
|
|
writeq(val64, &bar0->sw_reset);
|
|
msleep(500);
|
|
val64 = readq(&bar0->sw_reset);
|
|
}
|
|
|
|
/* Remove XGXS from reset state */
|
|
val64 = 0;
|
|
writeq(val64, &bar0->sw_reset);
|
|
msleep(500);
|
|
val64 = readq(&bar0->sw_reset);
|
|
|
|
/* Ensure that it's safe to access registers by checking
|
|
* RIC_RUNNING bit is reset. Check is valid only for XframeII.
|
|
*/
|
|
if (nic->device_type == XFRAME_II_DEVICE) {
|
|
for (i = 0; i < 50; i++) {
|
|
val64 = readq(&bar0->adapter_status);
|
|
if (!(val64 & ADAPTER_STATUS_RIC_RUNNING))
|
|
break;
|
|
msleep(10);
|
|
}
|
|
if (i == 50)
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Enable Receiving broadcasts */
|
|
add = &bar0->mac_cfg;
|
|
val64 = readq(&bar0->mac_cfg);
|
|
val64 |= MAC_RMAC_BCAST_ENABLE;
|
|
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
|
|
writel((u32)val64, add);
|
|
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
|
|
writel((u32) (val64 >> 32), (add + 4));
|
|
|
|
/* Read registers in all blocks */
|
|
val64 = readq(&bar0->mac_int_mask);
|
|
val64 = readq(&bar0->mc_int_mask);
|
|
val64 = readq(&bar0->xgxs_int_mask);
|
|
|
|
/* Set MTU */
|
|
val64 = dev->mtu;
|
|
writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
|
|
|
|
if (nic->device_type & XFRAME_II_DEVICE) {
|
|
while (herc_act_dtx_cfg[dtx_cnt] != END_SIGN) {
|
|
SPECIAL_REG_WRITE(herc_act_dtx_cfg[dtx_cnt],
|
|
&bar0->dtx_control, UF);
|
|
if (dtx_cnt & 0x1)
|
|
msleep(1); /* Necessary!! */
|
|
dtx_cnt++;
|
|
}
|
|
} else {
|
|
while (xena_dtx_cfg[dtx_cnt] != END_SIGN) {
|
|
SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt],
|
|
&bar0->dtx_control, UF);
|
|
val64 = readq(&bar0->dtx_control);
|
|
dtx_cnt++;
|
|
}
|
|
}
|
|
|
|
/* Tx DMA Initialization */
|
|
val64 = 0;
|
|
writeq(val64, &bar0->tx_fifo_partition_0);
|
|
writeq(val64, &bar0->tx_fifo_partition_1);
|
|
writeq(val64, &bar0->tx_fifo_partition_2);
|
|
writeq(val64, &bar0->tx_fifo_partition_3);
|
|
|
|
for (i = 0, j = 0; i < config->tx_fifo_num; i++) {
|
|
struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
|
|
|
|
val64 |= vBIT(tx_cfg->fifo_len - 1, ((j * 32) + 19), 13) |
|
|
vBIT(tx_cfg->fifo_priority, ((j * 32) + 5), 3);
|
|
|
|
if (i == (config->tx_fifo_num - 1)) {
|
|
if (i % 2 == 0)
|
|
i++;
|
|
}
|
|
|
|
switch (i) {
|
|
case 1:
|
|
writeq(val64, &bar0->tx_fifo_partition_0);
|
|
val64 = 0;
|
|
j = 0;
|
|
break;
|
|
case 3:
|
|
writeq(val64, &bar0->tx_fifo_partition_1);
|
|
val64 = 0;
|
|
j = 0;
|
|
break;
|
|
case 5:
|
|
writeq(val64, &bar0->tx_fifo_partition_2);
|
|
val64 = 0;
|
|
j = 0;
|
|
break;
|
|
case 7:
|
|
writeq(val64, &bar0->tx_fifo_partition_3);
|
|
val64 = 0;
|
|
j = 0;
|
|
break;
|
|
default:
|
|
j++;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug
|
|
* SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
|
|
*/
|
|
if ((nic->device_type == XFRAME_I_DEVICE) && (nic->pdev->revision < 4))
|
|
writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable);
|
|
|
|
val64 = readq(&bar0->tx_fifo_partition_0);
|
|
DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n",
|
|
&bar0->tx_fifo_partition_0, (unsigned long long)val64);
|
|
|
|
/*
|
|
* Initialization of Tx_PA_CONFIG register to ignore packet
|
|
* integrity checking.
|
|
*/
|
|
val64 = readq(&bar0->tx_pa_cfg);
|
|
val64 |= TX_PA_CFG_IGNORE_FRM_ERR |
|
|
TX_PA_CFG_IGNORE_SNAP_OUI |
|
|
TX_PA_CFG_IGNORE_LLC_CTRL |
|
|
TX_PA_CFG_IGNORE_L2_ERR;
|
|
writeq(val64, &bar0->tx_pa_cfg);
|
|
|
|
/* Rx DMA intialization. */
|
|
val64 = 0;
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
|
|
|
|
val64 |= vBIT(rx_cfg->ring_priority, (5 + (i * 8)), 3);
|
|
}
|
|
writeq(val64, &bar0->rx_queue_priority);
|
|
|
|
/*
|
|
* Allocating equal share of memory to all the
|
|
* configured Rings.
|
|
*/
|
|
val64 = 0;
|
|
if (nic->device_type & XFRAME_II_DEVICE)
|
|
mem_size = 32;
|
|
else
|
|
mem_size = 64;
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
switch (i) {
|
|
case 0:
|
|
mem_share = (mem_size / config->rx_ring_num +
|
|
mem_size % config->rx_ring_num);
|
|
val64 |= RX_QUEUE_CFG_Q0_SZ(mem_share);
|
|
continue;
|
|
case 1:
|
|
mem_share = (mem_size / config->rx_ring_num);
|
|
val64 |= RX_QUEUE_CFG_Q1_SZ(mem_share);
|
|
continue;
|
|
case 2:
|
|
mem_share = (mem_size / config->rx_ring_num);
|
|
val64 |= RX_QUEUE_CFG_Q2_SZ(mem_share);
|
|
continue;
|
|
case 3:
|
|
mem_share = (mem_size / config->rx_ring_num);
|
|
val64 |= RX_QUEUE_CFG_Q3_SZ(mem_share);
|
|
continue;
|
|
case 4:
|
|
mem_share = (mem_size / config->rx_ring_num);
|
|
val64 |= RX_QUEUE_CFG_Q4_SZ(mem_share);
|
|
continue;
|
|
case 5:
|
|
mem_share = (mem_size / config->rx_ring_num);
|
|
val64 |= RX_QUEUE_CFG_Q5_SZ(mem_share);
|
|
continue;
|
|
case 6:
|
|
mem_share = (mem_size / config->rx_ring_num);
|
|
val64 |= RX_QUEUE_CFG_Q6_SZ(mem_share);
|
|
continue;
|
|
case 7:
|
|
mem_share = (mem_size / config->rx_ring_num);
|
|
val64 |= RX_QUEUE_CFG_Q7_SZ(mem_share);
|
|
continue;
|
|
}
|
|
}
|
|
writeq(val64, &bar0->rx_queue_cfg);
|
|
|
|
/*
|
|
* Filling Tx round robin registers
|
|
* as per the number of FIFOs for equal scheduling priority
|
|
*/
|
|
switch (config->tx_fifo_num) {
|
|
case 1:
|
|
val64 = 0x0;
|
|
writeq(val64, &bar0->tx_w_round_robin_0);
|
|
writeq(val64, &bar0->tx_w_round_robin_1);
|
|
writeq(val64, &bar0->tx_w_round_robin_2);
|
|
writeq(val64, &bar0->tx_w_round_robin_3);
|
|
writeq(val64, &bar0->tx_w_round_robin_4);
|
|
break;
|
|
case 2:
|
|
val64 = 0x0001000100010001ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_0);
|
|
writeq(val64, &bar0->tx_w_round_robin_1);
|
|
writeq(val64, &bar0->tx_w_round_robin_2);
|
|
writeq(val64, &bar0->tx_w_round_robin_3);
|
|
val64 = 0x0001000100000000ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_4);
|
|
break;
|
|
case 3:
|
|
val64 = 0x0001020001020001ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_0);
|
|
val64 = 0x0200010200010200ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_1);
|
|
val64 = 0x0102000102000102ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_2);
|
|
val64 = 0x0001020001020001ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_3);
|
|
val64 = 0x0200010200000000ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_4);
|
|
break;
|
|
case 4:
|
|
val64 = 0x0001020300010203ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_0);
|
|
writeq(val64, &bar0->tx_w_round_robin_1);
|
|
writeq(val64, &bar0->tx_w_round_robin_2);
|
|
writeq(val64, &bar0->tx_w_round_robin_3);
|
|
val64 = 0x0001020300000000ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_4);
|
|
break;
|
|
case 5:
|
|
val64 = 0x0001020304000102ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_0);
|
|
val64 = 0x0304000102030400ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_1);
|
|
val64 = 0x0102030400010203ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_2);
|
|
val64 = 0x0400010203040001ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_3);
|
|
val64 = 0x0203040000000000ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_4);
|
|
break;
|
|
case 6:
|
|
val64 = 0x0001020304050001ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_0);
|
|
val64 = 0x0203040500010203ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_1);
|
|
val64 = 0x0405000102030405ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_2);
|
|
val64 = 0x0001020304050001ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_3);
|
|
val64 = 0x0203040500000000ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_4);
|
|
break;
|
|
case 7:
|
|
val64 = 0x0001020304050600ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_0);
|
|
val64 = 0x0102030405060001ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_1);
|
|
val64 = 0x0203040506000102ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_2);
|
|
val64 = 0x0304050600010203ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_3);
|
|
val64 = 0x0405060000000000ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_4);
|
|
break;
|
|
case 8:
|
|
val64 = 0x0001020304050607ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_0);
|
|
writeq(val64, &bar0->tx_w_round_robin_1);
|
|
writeq(val64, &bar0->tx_w_round_robin_2);
|
|
writeq(val64, &bar0->tx_w_round_robin_3);
|
|
val64 = 0x0001020300000000ULL;
|
|
writeq(val64, &bar0->tx_w_round_robin_4);
|
|
break;
|
|
}
|
|
|
|
/* Enable all configured Tx FIFO partitions */
|
|
val64 = readq(&bar0->tx_fifo_partition_0);
|
|
val64 |= (TX_FIFO_PARTITION_EN);
|
|
writeq(val64, &bar0->tx_fifo_partition_0);
|
|
|
|
/* Filling the Rx round robin registers as per the
|
|
* number of Rings and steering based on QoS with
|
|
* equal priority.
|
|
*/
|
|
switch (config->rx_ring_num) {
|
|
case 1:
|
|
val64 = 0x0;
|
|
writeq(val64, &bar0->rx_w_round_robin_0);
|
|
writeq(val64, &bar0->rx_w_round_robin_1);
|
|
writeq(val64, &bar0->rx_w_round_robin_2);
|
|
writeq(val64, &bar0->rx_w_round_robin_3);
|
|
writeq(val64, &bar0->rx_w_round_robin_4);
|
|
|
|
val64 = 0x8080808080808080ULL;
|
|
writeq(val64, &bar0->rts_qos_steering);
|
|
break;
|
|
case 2:
|
|
val64 = 0x0001000100010001ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_0);
|
|
writeq(val64, &bar0->rx_w_round_robin_1);
|
|
writeq(val64, &bar0->rx_w_round_robin_2);
|
|
writeq(val64, &bar0->rx_w_round_robin_3);
|
|
val64 = 0x0001000100000000ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_4);
|
|
|
|
val64 = 0x8080808040404040ULL;
|
|
writeq(val64, &bar0->rts_qos_steering);
|
|
break;
|
|
case 3:
|
|
val64 = 0x0001020001020001ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_0);
|
|
val64 = 0x0200010200010200ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_1);
|
|
val64 = 0x0102000102000102ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_2);
|
|
val64 = 0x0001020001020001ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_3);
|
|
val64 = 0x0200010200000000ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_4);
|
|
|
|
val64 = 0x8080804040402020ULL;
|
|
writeq(val64, &bar0->rts_qos_steering);
|
|
break;
|
|
case 4:
|
|
val64 = 0x0001020300010203ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_0);
|
|
writeq(val64, &bar0->rx_w_round_robin_1);
|
|
writeq(val64, &bar0->rx_w_round_robin_2);
|
|
writeq(val64, &bar0->rx_w_round_robin_3);
|
|
val64 = 0x0001020300000000ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_4);
|
|
|
|
val64 = 0x8080404020201010ULL;
|
|
writeq(val64, &bar0->rts_qos_steering);
|
|
break;
|
|
case 5:
|
|
val64 = 0x0001020304000102ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_0);
|
|
val64 = 0x0304000102030400ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_1);
|
|
val64 = 0x0102030400010203ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_2);
|
|
val64 = 0x0400010203040001ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_3);
|
|
val64 = 0x0203040000000000ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_4);
|
|
|
|
val64 = 0x8080404020201008ULL;
|
|
writeq(val64, &bar0->rts_qos_steering);
|
|
break;
|
|
case 6:
|
|
val64 = 0x0001020304050001ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_0);
|
|
val64 = 0x0203040500010203ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_1);
|
|
val64 = 0x0405000102030405ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_2);
|
|
val64 = 0x0001020304050001ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_3);
|
|
val64 = 0x0203040500000000ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_4);
|
|
|
|
val64 = 0x8080404020100804ULL;
|
|
writeq(val64, &bar0->rts_qos_steering);
|
|
break;
|
|
case 7:
|
|
val64 = 0x0001020304050600ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_0);
|
|
val64 = 0x0102030405060001ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_1);
|
|
val64 = 0x0203040506000102ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_2);
|
|
val64 = 0x0304050600010203ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_3);
|
|
val64 = 0x0405060000000000ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_4);
|
|
|
|
val64 = 0x8080402010080402ULL;
|
|
writeq(val64, &bar0->rts_qos_steering);
|
|
break;
|
|
case 8:
|
|
val64 = 0x0001020304050607ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_0);
|
|
writeq(val64, &bar0->rx_w_round_robin_1);
|
|
writeq(val64, &bar0->rx_w_round_robin_2);
|
|
writeq(val64, &bar0->rx_w_round_robin_3);
|
|
val64 = 0x0001020300000000ULL;
|
|
writeq(val64, &bar0->rx_w_round_robin_4);
|
|
|
|
val64 = 0x8040201008040201ULL;
|
|
writeq(val64, &bar0->rts_qos_steering);
|
|
break;
|
|
}
|
|
|
|
/* UDP Fix */
|
|
val64 = 0;
|
|
for (i = 0; i < 8; i++)
|
|
writeq(val64, &bar0->rts_frm_len_n[i]);
|
|
|
|
/* Set the default rts frame length for the rings configured */
|
|
val64 = MAC_RTS_FRM_LEN_SET(dev->mtu+22);
|
|
for (i = 0 ; i < config->rx_ring_num ; i++)
|
|
writeq(val64, &bar0->rts_frm_len_n[i]);
|
|
|
|
/* Set the frame length for the configured rings
|
|
* desired by the user
|
|
*/
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
/* If rts_frm_len[i] == 0 then it is assumed that user not
|
|
* specified frame length steering.
|
|
* If the user provides the frame length then program
|
|
* the rts_frm_len register for those values or else
|
|
* leave it as it is.
|
|
*/
|
|
if (rts_frm_len[i] != 0) {
|
|
writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len[i]),
|
|
&bar0->rts_frm_len_n[i]);
|
|
}
|
|
}
|
|
|
|
/* Disable differentiated services steering logic */
|
|
for (i = 0; i < 64; i++) {
|
|
if (rts_ds_steer(nic, i, 0) == FAILURE) {
|
|
DBG_PRINT(ERR_DBG,
|
|
"%s: rts_ds_steer failed on codepoint %d\n",
|
|
dev->name, i);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
/* Program statistics memory */
|
|
writeq(mac_control->stats_mem_phy, &bar0->stat_addr);
|
|
|
|
if (nic->device_type == XFRAME_II_DEVICE) {
|
|
val64 = STAT_BC(0x320);
|
|
writeq(val64, &bar0->stat_byte_cnt);
|
|
}
|
|
|
|
/*
|
|
* Initializing the sampling rate for the device to calculate the
|
|
* bandwidth utilization.
|
|
*/
|
|
val64 = MAC_TX_LINK_UTIL_VAL(tmac_util_period) |
|
|
MAC_RX_LINK_UTIL_VAL(rmac_util_period);
|
|
writeq(val64, &bar0->mac_link_util);
|
|
|
|
/*
|
|
* Initializing the Transmit and Receive Traffic Interrupt
|
|
* Scheme.
|
|
*/
|
|
|
|
/* Initialize TTI */
|
|
if (SUCCESS != init_tti(nic, nic->last_link_state))
|
|
return -ENODEV;
|
|
|
|
/* RTI Initialization */
|
|
if (nic->device_type == XFRAME_II_DEVICE) {
|
|
/*
|
|
* Programmed to generate Apprx 500 Intrs per
|
|
* second
|
|
*/
|
|
int count = (nic->config.bus_speed * 125)/4;
|
|
val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count);
|
|
} else
|
|
val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF);
|
|
val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) |
|
|
RTI_DATA1_MEM_RX_URNG_B(0x10) |
|
|
RTI_DATA1_MEM_RX_URNG_C(0x30) |
|
|
RTI_DATA1_MEM_RX_TIMER_AC_EN;
|
|
|
|
writeq(val64, &bar0->rti_data1_mem);
|
|
|
|
val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
|
|
RTI_DATA2_MEM_RX_UFC_B(0x2) ;
|
|
if (nic->config.intr_type == MSI_X)
|
|
val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) |
|
|
RTI_DATA2_MEM_RX_UFC_D(0x40));
|
|
else
|
|
val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x40) |
|
|
RTI_DATA2_MEM_RX_UFC_D(0x80));
|
|
writeq(val64, &bar0->rti_data2_mem);
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
val64 = RTI_CMD_MEM_WE |
|
|
RTI_CMD_MEM_STROBE_NEW_CMD |
|
|
RTI_CMD_MEM_OFFSET(i);
|
|
writeq(val64, &bar0->rti_command_mem);
|
|
|
|
/*
|
|
* Once the operation completes, the Strobe bit of the
|
|
* command register will be reset. We poll for this
|
|
* particular condition. We wait for a maximum of 500ms
|
|
* for the operation to complete, if it's not complete
|
|
* by then we return error.
|
|
*/
|
|
time = 0;
|
|
while (true) {
|
|
val64 = readq(&bar0->rti_command_mem);
|
|
if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD))
|
|
break;
|
|
|
|
if (time > 10) {
|
|
DBG_PRINT(ERR_DBG, "%s: RTI init failed\n",
|
|
dev->name);
|
|
return -ENODEV;
|
|
}
|
|
time++;
|
|
msleep(50);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Initializing proper values as Pause threshold into all
|
|
* the 8 Queues on Rx side.
|
|
*/
|
|
writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q0q3);
|
|
writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7);
|
|
|
|
/* Disable RMAC PAD STRIPPING */
|
|
add = &bar0->mac_cfg;
|
|
val64 = readq(&bar0->mac_cfg);
|
|
val64 &= ~(MAC_CFG_RMAC_STRIP_PAD);
|
|
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
|
|
writel((u32) (val64), add);
|
|
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
|
|
writel((u32) (val64 >> 32), (add + 4));
|
|
val64 = readq(&bar0->mac_cfg);
|
|
|
|
/* Enable FCS stripping by adapter */
|
|
add = &bar0->mac_cfg;
|
|
val64 = readq(&bar0->mac_cfg);
|
|
val64 |= MAC_CFG_RMAC_STRIP_FCS;
|
|
if (nic->device_type == XFRAME_II_DEVICE)
|
|
writeq(val64, &bar0->mac_cfg);
|
|
else {
|
|
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
|
|
writel((u32) (val64), add);
|
|
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
|
|
writel((u32) (val64 >> 32), (add + 4));
|
|
}
|
|
|
|
/*
|
|
* Set the time value to be inserted in the pause frame
|
|
* generated by xena.
|
|
*/
|
|
val64 = readq(&bar0->rmac_pause_cfg);
|
|
val64 &= ~(RMAC_PAUSE_HG_PTIME(0xffff));
|
|
val64 |= RMAC_PAUSE_HG_PTIME(nic->mac_control.rmac_pause_time);
|
|
writeq(val64, &bar0->rmac_pause_cfg);
|
|
|
|
/*
|
|
* Set the Threshold Limit for Generating the pause frame
|
|
* If the amount of data in any Queue exceeds ratio of
|
|
* (mac_control.mc_pause_threshold_q0q3 or q4q7)/256
|
|
* pause frame is generated
|
|
*/
|
|
val64 = 0;
|
|
for (i = 0; i < 4; i++) {
|
|
val64 |= (((u64)0xFF00 |
|
|
nic->mac_control.mc_pause_threshold_q0q3)
|
|
<< (i * 2 * 8));
|
|
}
|
|
writeq(val64, &bar0->mc_pause_thresh_q0q3);
|
|
|
|
val64 = 0;
|
|
for (i = 0; i < 4; i++) {
|
|
val64 |= (((u64)0xFF00 |
|
|
nic->mac_control.mc_pause_threshold_q4q7)
|
|
<< (i * 2 * 8));
|
|
}
|
|
writeq(val64, &bar0->mc_pause_thresh_q4q7);
|
|
|
|
/*
|
|
* TxDMA will stop Read request if the number of read split has
|
|
* exceeded the limit pointed by shared_splits
|
|
*/
|
|
val64 = readq(&bar0->pic_control);
|
|
val64 |= PIC_CNTL_SHARED_SPLITS(shared_splits);
|
|
writeq(val64, &bar0->pic_control);
|
|
|
|
if (nic->config.bus_speed == 266) {
|
|
writeq(TXREQTO_VAL(0x7f) | TXREQTO_EN, &bar0->txreqtimeout);
|
|
writeq(0x0, &bar0->read_retry_delay);
|
|
writeq(0x0, &bar0->write_retry_delay);
|
|
}
|
|
|
|
/*
|
|
* Programming the Herc to split every write transaction
|
|
* that does not start on an ADB to reduce disconnects.
|
|
*/
|
|
if (nic->device_type == XFRAME_II_DEVICE) {
|
|
val64 = FAULT_BEHAVIOUR | EXT_REQ_EN |
|
|
MISC_LINK_STABILITY_PRD(3);
|
|
writeq(val64, &bar0->misc_control);
|
|
val64 = readq(&bar0->pic_control2);
|
|
val64 &= ~(s2BIT(13)|s2BIT(14)|s2BIT(15));
|
|
writeq(val64, &bar0->pic_control2);
|
|
}
|
|
if (strstr(nic->product_name, "CX4")) {
|
|
val64 = TMAC_AVG_IPG(0x17);
|
|
writeq(val64, &bar0->tmac_avg_ipg);
|
|
}
|
|
|
|
return SUCCESS;
|
|
}
|
|
#define LINK_UP_DOWN_INTERRUPT 1
|
|
#define MAC_RMAC_ERR_TIMER 2
|
|
|
|
static int s2io_link_fault_indication(struct s2io_nic *nic)
|
|
{
|
|
if (nic->device_type == XFRAME_II_DEVICE)
|
|
return LINK_UP_DOWN_INTERRUPT;
|
|
else
|
|
return MAC_RMAC_ERR_TIMER;
|
|
}
|
|
|
|
/**
|
|
* do_s2io_write_bits - update alarm bits in alarm register
|
|
* @value: alarm bits
|
|
* @flag: interrupt status
|
|
* @addr: address value
|
|
* Description: update alarm bits in alarm register
|
|
* Return Value:
|
|
* NONE.
|
|
*/
|
|
static void do_s2io_write_bits(u64 value, int flag, void __iomem *addr)
|
|
{
|
|
u64 temp64;
|
|
|
|
temp64 = readq(addr);
|
|
|
|
if (flag == ENABLE_INTRS)
|
|
temp64 &= ~((u64)value);
|
|
else
|
|
temp64 |= ((u64)value);
|
|
writeq(temp64, addr);
|
|
}
|
|
|
|
static void en_dis_err_alarms(struct s2io_nic *nic, u16 mask, int flag)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = nic->bar0;
|
|
register u64 gen_int_mask = 0;
|
|
u64 interruptible;
|
|
|
|
writeq(DISABLE_ALL_INTRS, &bar0->general_int_mask);
|
|
if (mask & TX_DMA_INTR) {
|
|
gen_int_mask |= TXDMA_INT_M;
|
|
|
|
do_s2io_write_bits(TXDMA_TDA_INT | TXDMA_PFC_INT |
|
|
TXDMA_PCC_INT | TXDMA_TTI_INT |
|
|
TXDMA_LSO_INT | TXDMA_TPA_INT |
|
|
TXDMA_SM_INT, flag, &bar0->txdma_int_mask);
|
|
|
|
do_s2io_write_bits(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM |
|
|
PFC_MISC_0_ERR | PFC_MISC_1_ERR |
|
|
PFC_PCIX_ERR | PFC_ECC_SG_ERR, flag,
|
|
&bar0->pfc_err_mask);
|
|
|
|
do_s2io_write_bits(TDA_Fn_ECC_DB_ERR | TDA_SM0_ERR_ALARM |
|
|
TDA_SM1_ERR_ALARM | TDA_Fn_ECC_SG_ERR |
|
|
TDA_PCIX_ERR, flag, &bar0->tda_err_mask);
|
|
|
|
do_s2io_write_bits(PCC_FB_ECC_DB_ERR | PCC_TXB_ECC_DB_ERR |
|
|
PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM |
|
|
PCC_N_SERR | PCC_6_COF_OV_ERR |
|
|
PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR |
|
|
PCC_7_LSO_OV_ERR | PCC_FB_ECC_SG_ERR |
|
|
PCC_TXB_ECC_SG_ERR,
|
|
flag, &bar0->pcc_err_mask);
|
|
|
|
do_s2io_write_bits(TTI_SM_ERR_ALARM | TTI_ECC_SG_ERR |
|
|
TTI_ECC_DB_ERR, flag, &bar0->tti_err_mask);
|
|
|
|
do_s2io_write_bits(LSO6_ABORT | LSO7_ABORT |
|
|
LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM |
|
|
LSO6_SEND_OFLOW | LSO7_SEND_OFLOW,
|
|
flag, &bar0->lso_err_mask);
|
|
|
|
do_s2io_write_bits(TPA_SM_ERR_ALARM | TPA_TX_FRM_DROP,
|
|
flag, &bar0->tpa_err_mask);
|
|
|
|
do_s2io_write_bits(SM_SM_ERR_ALARM, flag, &bar0->sm_err_mask);
|
|
}
|
|
|
|
if (mask & TX_MAC_INTR) {
|
|
gen_int_mask |= TXMAC_INT_M;
|
|
do_s2io_write_bits(MAC_INT_STATUS_TMAC_INT, flag,
|
|
&bar0->mac_int_mask);
|
|
do_s2io_write_bits(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR |
|
|
TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR |
|
|
TMAC_DESC_ECC_SG_ERR | TMAC_DESC_ECC_DB_ERR,
|
|
flag, &bar0->mac_tmac_err_mask);
|
|
}
|
|
|
|
if (mask & TX_XGXS_INTR) {
|
|
gen_int_mask |= TXXGXS_INT_M;
|
|
do_s2io_write_bits(XGXS_INT_STATUS_TXGXS, flag,
|
|
&bar0->xgxs_int_mask);
|
|
do_s2io_write_bits(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR |
|
|
TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR,
|
|
flag, &bar0->xgxs_txgxs_err_mask);
|
|
}
|
|
|
|
if (mask & RX_DMA_INTR) {
|
|
gen_int_mask |= RXDMA_INT_M;
|
|
do_s2io_write_bits(RXDMA_INT_RC_INT_M | RXDMA_INT_RPA_INT_M |
|
|
RXDMA_INT_RDA_INT_M | RXDMA_INT_RTI_INT_M,
|
|
flag, &bar0->rxdma_int_mask);
|
|
do_s2io_write_bits(RC_PRCn_ECC_DB_ERR | RC_FTC_ECC_DB_ERR |
|
|
RC_PRCn_SM_ERR_ALARM | RC_FTC_SM_ERR_ALARM |
|
|
RC_PRCn_ECC_SG_ERR | RC_FTC_ECC_SG_ERR |
|
|
RC_RDA_FAIL_WR_Rn, flag, &bar0->rc_err_mask);
|
|
do_s2io_write_bits(PRC_PCI_AB_RD_Rn | PRC_PCI_AB_WR_Rn |
|
|
PRC_PCI_AB_F_WR_Rn | PRC_PCI_DP_RD_Rn |
|
|
PRC_PCI_DP_WR_Rn | PRC_PCI_DP_F_WR_Rn, flag,
|
|
&bar0->prc_pcix_err_mask);
|
|
do_s2io_write_bits(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR |
|
|
RPA_ECC_SG_ERR | RPA_ECC_DB_ERR, flag,
|
|
&bar0->rpa_err_mask);
|
|
do_s2io_write_bits(RDA_RXDn_ECC_DB_ERR | RDA_FRM_ECC_DB_N_AERR |
|
|
RDA_SM1_ERR_ALARM | RDA_SM0_ERR_ALARM |
|
|
RDA_RXD_ECC_DB_SERR | RDA_RXDn_ECC_SG_ERR |
|
|
RDA_FRM_ECC_SG_ERR |
|
|
RDA_MISC_ERR|RDA_PCIX_ERR,
|
|
flag, &bar0->rda_err_mask);
|
|
do_s2io_write_bits(RTI_SM_ERR_ALARM |
|
|
RTI_ECC_SG_ERR | RTI_ECC_DB_ERR,
|
|
flag, &bar0->rti_err_mask);
|
|
}
|
|
|
|
if (mask & RX_MAC_INTR) {
|
|
gen_int_mask |= RXMAC_INT_M;
|
|
do_s2io_write_bits(MAC_INT_STATUS_RMAC_INT, flag,
|
|
&bar0->mac_int_mask);
|
|
interruptible = (RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR |
|
|
RMAC_UNUSED_INT | RMAC_SINGLE_ECC_ERR |
|
|
RMAC_DOUBLE_ECC_ERR);
|
|
if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER)
|
|
interruptible |= RMAC_LINK_STATE_CHANGE_INT;
|
|
do_s2io_write_bits(interruptible,
|
|
flag, &bar0->mac_rmac_err_mask);
|
|
}
|
|
|
|
if (mask & RX_XGXS_INTR) {
|
|
gen_int_mask |= RXXGXS_INT_M;
|
|
do_s2io_write_bits(XGXS_INT_STATUS_RXGXS, flag,
|
|
&bar0->xgxs_int_mask);
|
|
do_s2io_write_bits(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR, flag,
|
|
&bar0->xgxs_rxgxs_err_mask);
|
|
}
|
|
|
|
if (mask & MC_INTR) {
|
|
gen_int_mask |= MC_INT_M;
|
|
do_s2io_write_bits(MC_INT_MASK_MC_INT,
|
|
flag, &bar0->mc_int_mask);
|
|
do_s2io_write_bits(MC_ERR_REG_SM_ERR | MC_ERR_REG_ECC_ALL_SNG |
|
|
MC_ERR_REG_ECC_ALL_DBL | PLL_LOCK_N, flag,
|
|
&bar0->mc_err_mask);
|
|
}
|
|
nic->general_int_mask = gen_int_mask;
|
|
|
|
/* Remove this line when alarm interrupts are enabled */
|
|
nic->general_int_mask = 0;
|
|
}
|
|
|
|
/**
|
|
* en_dis_able_nic_intrs - Enable or Disable the interrupts
|
|
* @nic: device private variable,
|
|
* @mask: A mask indicating which Intr block must be modified and,
|
|
* @flag: A flag indicating whether to enable or disable the Intrs.
|
|
* Description: This function will either disable or enable the interrupts
|
|
* depending on the flag argument. The mask argument can be used to
|
|
* enable/disable any Intr block.
|
|
* Return Value: NONE.
|
|
*/
|
|
|
|
static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = nic->bar0;
|
|
register u64 temp64 = 0, intr_mask = 0;
|
|
|
|
intr_mask = nic->general_int_mask;
|
|
|
|
/* Top level interrupt classification */
|
|
/* PIC Interrupts */
|
|
if (mask & TX_PIC_INTR) {
|
|
/* Enable PIC Intrs in the general intr mask register */
|
|
intr_mask |= TXPIC_INT_M;
|
|
if (flag == ENABLE_INTRS) {
|
|
/*
|
|
* If Hercules adapter enable GPIO otherwise
|
|
* disable all PCIX, Flash, MDIO, IIC and GPIO
|
|
* interrupts for now.
|
|
* TODO
|
|
*/
|
|
if (s2io_link_fault_indication(nic) ==
|
|
LINK_UP_DOWN_INTERRUPT) {
|
|
do_s2io_write_bits(PIC_INT_GPIO, flag,
|
|
&bar0->pic_int_mask);
|
|
do_s2io_write_bits(GPIO_INT_MASK_LINK_UP, flag,
|
|
&bar0->gpio_int_mask);
|
|
} else
|
|
writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
|
|
} else if (flag == DISABLE_INTRS) {
|
|
/*
|
|
* Disable PIC Intrs in the general
|
|
* intr mask register
|
|
*/
|
|
writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
|
|
}
|
|
}
|
|
|
|
/* Tx traffic interrupts */
|
|
if (mask & TX_TRAFFIC_INTR) {
|
|
intr_mask |= TXTRAFFIC_INT_M;
|
|
if (flag == ENABLE_INTRS) {
|
|
/*
|
|
* Enable all the Tx side interrupts
|
|
* writing 0 Enables all 64 TX interrupt levels
|
|
*/
|
|
writeq(0x0, &bar0->tx_traffic_mask);
|
|
} else if (flag == DISABLE_INTRS) {
|
|
/*
|
|
* Disable Tx Traffic Intrs in the general intr mask
|
|
* register.
|
|
*/
|
|
writeq(DISABLE_ALL_INTRS, &bar0->tx_traffic_mask);
|
|
}
|
|
}
|
|
|
|
/* Rx traffic interrupts */
|
|
if (mask & RX_TRAFFIC_INTR) {
|
|
intr_mask |= RXTRAFFIC_INT_M;
|
|
if (flag == ENABLE_INTRS) {
|
|
/* writing 0 Enables all 8 RX interrupt levels */
|
|
writeq(0x0, &bar0->rx_traffic_mask);
|
|
} else if (flag == DISABLE_INTRS) {
|
|
/*
|
|
* Disable Rx Traffic Intrs in the general intr mask
|
|
* register.
|
|
*/
|
|
writeq(DISABLE_ALL_INTRS, &bar0->rx_traffic_mask);
|
|
}
|
|
}
|
|
|
|
temp64 = readq(&bar0->general_int_mask);
|
|
if (flag == ENABLE_INTRS)
|
|
temp64 &= ~((u64)intr_mask);
|
|
else
|
|
temp64 = DISABLE_ALL_INTRS;
|
|
writeq(temp64, &bar0->general_int_mask);
|
|
|
|
nic->general_int_mask = readq(&bar0->general_int_mask);
|
|
}
|
|
|
|
/**
|
|
* verify_pcc_quiescent- Checks for PCC quiescent state
|
|
* Return: 1 If PCC is quiescence
|
|
* 0 If PCC is not quiescence
|
|
*/
|
|
static int verify_pcc_quiescent(struct s2io_nic *sp, int flag)
|
|
{
|
|
int ret = 0, herc;
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
u64 val64 = readq(&bar0->adapter_status);
|
|
|
|
herc = (sp->device_type == XFRAME_II_DEVICE);
|
|
|
|
if (flag == false) {
|
|
if ((!herc && (sp->pdev->revision >= 4)) || herc) {
|
|
if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE))
|
|
ret = 1;
|
|
} else {
|
|
if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE))
|
|
ret = 1;
|
|
}
|
|
} else {
|
|
if ((!herc && (sp->pdev->revision >= 4)) || herc) {
|
|
if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
|
|
ADAPTER_STATUS_RMAC_PCC_IDLE))
|
|
ret = 1;
|
|
} else {
|
|
if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) ==
|
|
ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE))
|
|
ret = 1;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
/**
|
|
* verify_xena_quiescence - Checks whether the H/W is ready
|
|
* Description: Returns whether the H/W is ready to go or not. Depending
|
|
* on whether adapter enable bit was written or not the comparison
|
|
* differs and the calling function passes the input argument flag to
|
|
* indicate this.
|
|
* Return: 1 If xena is quiescence
|
|
* 0 If Xena is not quiescence
|
|
*/
|
|
|
|
static int verify_xena_quiescence(struct s2io_nic *sp)
|
|
{
|
|
int mode;
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
u64 val64 = readq(&bar0->adapter_status);
|
|
mode = s2io_verify_pci_mode(sp);
|
|
|
|
if (!(val64 & ADAPTER_STATUS_TDMA_READY)) {
|
|
DBG_PRINT(ERR_DBG, "TDMA is not ready!\n");
|
|
return 0;
|
|
}
|
|
if (!(val64 & ADAPTER_STATUS_RDMA_READY)) {
|
|
DBG_PRINT(ERR_DBG, "RDMA is not ready!\n");
|
|
return 0;
|
|
}
|
|
if (!(val64 & ADAPTER_STATUS_PFC_READY)) {
|
|
DBG_PRINT(ERR_DBG, "PFC is not ready!\n");
|
|
return 0;
|
|
}
|
|
if (!(val64 & ADAPTER_STATUS_TMAC_BUF_EMPTY)) {
|
|
DBG_PRINT(ERR_DBG, "TMAC BUF is not empty!\n");
|
|
return 0;
|
|
}
|
|
if (!(val64 & ADAPTER_STATUS_PIC_QUIESCENT)) {
|
|
DBG_PRINT(ERR_DBG, "PIC is not QUIESCENT!\n");
|
|
return 0;
|
|
}
|
|
if (!(val64 & ADAPTER_STATUS_MC_DRAM_READY)) {
|
|
DBG_PRINT(ERR_DBG, "MC_DRAM is not ready!\n");
|
|
return 0;
|
|
}
|
|
if (!(val64 & ADAPTER_STATUS_MC_QUEUES_READY)) {
|
|
DBG_PRINT(ERR_DBG, "MC_QUEUES is not ready!\n");
|
|
return 0;
|
|
}
|
|
if (!(val64 & ADAPTER_STATUS_M_PLL_LOCK)) {
|
|
DBG_PRINT(ERR_DBG, "M_PLL is not locked!\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* In PCI 33 mode, the P_PLL is not used, and therefore,
|
|
* the the P_PLL_LOCK bit in the adapter_status register will
|
|
* not be asserted.
|
|
*/
|
|
if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
|
|
sp->device_type == XFRAME_II_DEVICE &&
|
|
mode != PCI_MODE_PCI_33) {
|
|
DBG_PRINT(ERR_DBG, "P_PLL is not locked!\n");
|
|
return 0;
|
|
}
|
|
if (!((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
|
|
ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
|
|
DBG_PRINT(ERR_DBG, "RC_PRC is not QUIESCENT!\n");
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* fix_mac_address - Fix for Mac addr problem on Alpha platforms
|
|
* @sp: Pointer to device specifc structure
|
|
* Description :
|
|
* New procedure to clear mac address reading problems on Alpha platforms
|
|
*
|
|
*/
|
|
|
|
static void fix_mac_address(struct s2io_nic *sp)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
u64 val64;
|
|
int i = 0;
|
|
|
|
while (fix_mac[i] != END_SIGN) {
|
|
writeq(fix_mac[i++], &bar0->gpio_control);
|
|
udelay(10);
|
|
val64 = readq(&bar0->gpio_control);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* start_nic - Turns the device on
|
|
* @nic : device private variable.
|
|
* Description:
|
|
* This function actually turns the device on. Before this function is
|
|
* called,all Registers are configured from their reset states
|
|
* and shared memory is allocated but the NIC is still quiescent. On
|
|
* calling this function, the device interrupts are cleared and the NIC is
|
|
* literally switched on by writing into the adapter control register.
|
|
* Return Value:
|
|
* SUCCESS on success and -1 on failure.
|
|
*/
|
|
|
|
static int start_nic(struct s2io_nic *nic)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = nic->bar0;
|
|
struct net_device *dev = nic->dev;
|
|
register u64 val64 = 0;
|
|
u16 subid, i;
|
|
struct config_param *config = &nic->config;
|
|
struct mac_info *mac_control = &nic->mac_control;
|
|
|
|
/* PRC Initialization and configuration */
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
struct ring_info *ring = &mac_control->rings[i];
|
|
|
|
writeq((u64)ring->rx_blocks[0].block_dma_addr,
|
|
&bar0->prc_rxd0_n[i]);
|
|
|
|
val64 = readq(&bar0->prc_ctrl_n[i]);
|
|
if (nic->rxd_mode == RXD_MODE_1)
|
|
val64 |= PRC_CTRL_RC_ENABLED;
|
|
else
|
|
val64 |= PRC_CTRL_RC_ENABLED | PRC_CTRL_RING_MODE_3;
|
|
if (nic->device_type == XFRAME_II_DEVICE)
|
|
val64 |= PRC_CTRL_GROUP_READS;
|
|
val64 &= ~PRC_CTRL_RXD_BACKOFF_INTERVAL(0xFFFFFF);
|
|
val64 |= PRC_CTRL_RXD_BACKOFF_INTERVAL(0x1000);
|
|
writeq(val64, &bar0->prc_ctrl_n[i]);
|
|
}
|
|
|
|
if (nic->rxd_mode == RXD_MODE_3B) {
|
|
/* Enabling 2 buffer mode by writing into Rx_pa_cfg reg. */
|
|
val64 = readq(&bar0->rx_pa_cfg);
|
|
val64 |= RX_PA_CFG_IGNORE_L2_ERR;
|
|
writeq(val64, &bar0->rx_pa_cfg);
|
|
}
|
|
|
|
if (vlan_tag_strip == 0) {
|
|
val64 = readq(&bar0->rx_pa_cfg);
|
|
val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG;
|
|
writeq(val64, &bar0->rx_pa_cfg);
|
|
nic->vlan_strip_flag = 0;
|
|
}
|
|
|
|
/*
|
|
* Enabling MC-RLDRAM. After enabling the device, we timeout
|
|
* for around 100ms, which is approximately the time required
|
|
* for the device to be ready for operation.
|
|
*/
|
|
val64 = readq(&bar0->mc_rldram_mrs);
|
|
val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE | MC_RLDRAM_MRS_ENABLE;
|
|
SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
|
|
val64 = readq(&bar0->mc_rldram_mrs);
|
|
|
|
msleep(100); /* Delay by around 100 ms. */
|
|
|
|
/* Enabling ECC Protection. */
|
|
val64 = readq(&bar0->adapter_control);
|
|
val64 &= ~ADAPTER_ECC_EN;
|
|
writeq(val64, &bar0->adapter_control);
|
|
|
|
/*
|
|
* Verify if the device is ready to be enabled, if so enable
|
|
* it.
|
|
*/
|
|
val64 = readq(&bar0->adapter_status);
|
|
if (!verify_xena_quiescence(nic)) {
|
|
DBG_PRINT(ERR_DBG, "%s: device is not ready, "
|
|
"Adapter status reads: 0x%llx\n",
|
|
dev->name, (unsigned long long)val64);
|
|
return FAILURE;
|
|
}
|
|
|
|
/*
|
|
* With some switches, link might be already up at this point.
|
|
* Because of this weird behavior, when we enable laser,
|
|
* we may not get link. We need to handle this. We cannot
|
|
* figure out which switch is misbehaving. So we are forced to
|
|
* make a global change.
|
|
*/
|
|
|
|
/* Enabling Laser. */
|
|
val64 = readq(&bar0->adapter_control);
|
|
val64 |= ADAPTER_EOI_TX_ON;
|
|
writeq(val64, &bar0->adapter_control);
|
|
|
|
if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
|
|
/*
|
|
* Dont see link state interrupts initally on some switches,
|
|
* so directly scheduling the link state task here.
|
|
*/
|
|
schedule_work(&nic->set_link_task);
|
|
}
|
|
/* SXE-002: Initialize link and activity LED */
|
|
subid = nic->pdev->subsystem_device;
|
|
if (((subid & 0xFF) >= 0x07) &&
|
|
(nic->device_type == XFRAME_I_DEVICE)) {
|
|
val64 = readq(&bar0->gpio_control);
|
|
val64 |= 0x0000800000000000ULL;
|
|
writeq(val64, &bar0->gpio_control);
|
|
val64 = 0x0411040400000000ULL;
|
|
writeq(val64, (void __iomem *)bar0 + 0x2700);
|
|
}
|
|
|
|
return SUCCESS;
|
|
}
|
|
/**
|
|
* s2io_txdl_getskb - Get the skb from txdl, unmap and return skb
|
|
*/
|
|
static struct sk_buff *s2io_txdl_getskb(struct fifo_info *fifo_data,
|
|
struct TxD *txdlp, int get_off)
|
|
{
|
|
struct s2io_nic *nic = fifo_data->nic;
|
|
struct sk_buff *skb;
|
|
struct TxD *txds;
|
|
u16 j, frg_cnt;
|
|
|
|
txds = txdlp;
|
|
if (txds->Host_Control == (u64)(long)fifo_data->ufo_in_band_v) {
|
|
pci_unmap_single(nic->pdev, (dma_addr_t)txds->Buffer_Pointer,
|
|
sizeof(u64), PCI_DMA_TODEVICE);
|
|
txds++;
|
|
}
|
|
|
|
skb = (struct sk_buff *)((unsigned long)txds->Host_Control);
|
|
if (!skb) {
|
|
memset(txdlp, 0, (sizeof(struct TxD) * fifo_data->max_txds));
|
|
return NULL;
|
|
}
|
|
pci_unmap_single(nic->pdev, (dma_addr_t)txds->Buffer_Pointer,
|
|
skb->len - skb->data_len, PCI_DMA_TODEVICE);
|
|
frg_cnt = skb_shinfo(skb)->nr_frags;
|
|
if (frg_cnt) {
|
|
txds++;
|
|
for (j = 0; j < frg_cnt; j++, txds++) {
|
|
skb_frag_t *frag = &skb_shinfo(skb)->frags[j];
|
|
if (!txds->Buffer_Pointer)
|
|
break;
|
|
pci_unmap_page(nic->pdev,
|
|
(dma_addr_t)txds->Buffer_Pointer,
|
|
frag->size, PCI_DMA_TODEVICE);
|
|
}
|
|
}
|
|
memset(txdlp, 0, (sizeof(struct TxD) * fifo_data->max_txds));
|
|
return skb;
|
|
}
|
|
|
|
/**
|
|
* free_tx_buffers - Free all queued Tx buffers
|
|
* @nic : device private variable.
|
|
* Description:
|
|
* Free all queued Tx buffers.
|
|
* Return Value: void
|
|
*/
|
|
|
|
static void free_tx_buffers(struct s2io_nic *nic)
|
|
{
|
|
struct net_device *dev = nic->dev;
|
|
struct sk_buff *skb;
|
|
struct TxD *txdp;
|
|
int i, j;
|
|
int cnt = 0;
|
|
struct config_param *config = &nic->config;
|
|
struct mac_info *mac_control = &nic->mac_control;
|
|
struct stat_block *stats = mac_control->stats_info;
|
|
struct swStat *swstats = &stats->sw_stat;
|
|
|
|
for (i = 0; i < config->tx_fifo_num; i++) {
|
|
struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
|
|
struct fifo_info *fifo = &mac_control->fifos[i];
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&fifo->tx_lock, flags);
|
|
for (j = 0; j < tx_cfg->fifo_len; j++) {
|
|
txdp = (struct TxD *)fifo->list_info[j].list_virt_addr;
|
|
skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j);
|
|
if (skb) {
|
|
swstats->mem_freed += skb->truesize;
|
|
dev_kfree_skb(skb);
|
|
cnt++;
|
|
}
|
|
}
|
|
DBG_PRINT(INTR_DBG,
|
|
"%s: forcibly freeing %d skbs on FIFO%d\n",
|
|
dev->name, cnt, i);
|
|
fifo->tx_curr_get_info.offset = 0;
|
|
fifo->tx_curr_put_info.offset = 0;
|
|
spin_unlock_irqrestore(&fifo->tx_lock, flags);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* stop_nic - To stop the nic
|
|
* @nic ; device private variable.
|
|
* Description:
|
|
* This function does exactly the opposite of what the start_nic()
|
|
* function does. This function is called to stop the device.
|
|
* Return Value:
|
|
* void.
|
|
*/
|
|
|
|
static void stop_nic(struct s2io_nic *nic)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = nic->bar0;
|
|
register u64 val64 = 0;
|
|
u16 interruptible;
|
|
|
|
/* Disable all interrupts */
|
|
en_dis_err_alarms(nic, ENA_ALL_INTRS, DISABLE_INTRS);
|
|
interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
|
|
interruptible |= TX_PIC_INTR;
|
|
en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS);
|
|
|
|
/* Clearing Adapter_En bit of ADAPTER_CONTROL Register */
|
|
val64 = readq(&bar0->adapter_control);
|
|
val64 &= ~(ADAPTER_CNTL_EN);
|
|
writeq(val64, &bar0->adapter_control);
|
|
}
|
|
|
|
/**
|
|
* fill_rx_buffers - Allocates the Rx side skbs
|
|
* @ring_info: per ring structure
|
|
* @from_card_up: If this is true, we will map the buffer to get
|
|
* the dma address for buf0 and buf1 to give it to the card.
|
|
* Else we will sync the already mapped buffer to give it to the card.
|
|
* Description:
|
|
* The function allocates Rx side skbs and puts the physical
|
|
* address of these buffers into the RxD buffer pointers, so that the NIC
|
|
* can DMA the received frame into these locations.
|
|
* The NIC supports 3 receive modes, viz
|
|
* 1. single buffer,
|
|
* 2. three buffer and
|
|
* 3. Five buffer modes.
|
|
* Each mode defines how many fragments the received frame will be split
|
|
* up into by the NIC. The frame is split into L3 header, L4 Header,
|
|
* L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself
|
|
* is split into 3 fragments. As of now only single buffer mode is
|
|
* supported.
|
|
* Return Value:
|
|
* SUCCESS on success or an appropriate -ve value on failure.
|
|
*/
|
|
static int fill_rx_buffers(struct s2io_nic *nic, struct ring_info *ring,
|
|
int from_card_up)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct RxD_t *rxdp;
|
|
int off, size, block_no, block_no1;
|
|
u32 alloc_tab = 0;
|
|
u32 alloc_cnt;
|
|
u64 tmp;
|
|
struct buffAdd *ba;
|
|
struct RxD_t *first_rxdp = NULL;
|
|
u64 Buffer0_ptr = 0, Buffer1_ptr = 0;
|
|
int rxd_index = 0;
|
|
struct RxD1 *rxdp1;
|
|
struct RxD3 *rxdp3;
|
|
struct swStat *swstats = &ring->nic->mac_control.stats_info->sw_stat;
|
|
|
|
alloc_cnt = ring->pkt_cnt - ring->rx_bufs_left;
|
|
|
|
block_no1 = ring->rx_curr_get_info.block_index;
|
|
while (alloc_tab < alloc_cnt) {
|
|
block_no = ring->rx_curr_put_info.block_index;
|
|
|
|
off = ring->rx_curr_put_info.offset;
|
|
|
|
rxdp = ring->rx_blocks[block_no].rxds[off].virt_addr;
|
|
|
|
rxd_index = off + 1;
|
|
if (block_no)
|
|
rxd_index += (block_no * ring->rxd_count);
|
|
|
|
if ((block_no == block_no1) &&
|
|
(off == ring->rx_curr_get_info.offset) &&
|
|
(rxdp->Host_Control)) {
|
|
DBG_PRINT(INTR_DBG, "%s: Get and Put info equated\n",
|
|
ring->dev->name);
|
|
goto end;
|
|
}
|
|
if (off && (off == ring->rxd_count)) {
|
|
ring->rx_curr_put_info.block_index++;
|
|
if (ring->rx_curr_put_info.block_index ==
|
|
ring->block_count)
|
|
ring->rx_curr_put_info.block_index = 0;
|
|
block_no = ring->rx_curr_put_info.block_index;
|
|
off = 0;
|
|
ring->rx_curr_put_info.offset = off;
|
|
rxdp = ring->rx_blocks[block_no].block_virt_addr;
|
|
DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
|
|
ring->dev->name, rxdp);
|
|
|
|
}
|
|
|
|
if ((rxdp->Control_1 & RXD_OWN_XENA) &&
|
|
((ring->rxd_mode == RXD_MODE_3B) &&
|
|
(rxdp->Control_2 & s2BIT(0)))) {
|
|
ring->rx_curr_put_info.offset = off;
|
|
goto end;
|
|
}
|
|
/* calculate size of skb based on ring mode */
|
|
size = ring->mtu +
|
|
HEADER_ETHERNET_II_802_3_SIZE +
|
|
HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
|
|
if (ring->rxd_mode == RXD_MODE_1)
|
|
size += NET_IP_ALIGN;
|
|
else
|
|
size = ring->mtu + ALIGN_SIZE + BUF0_LEN + 4;
|
|
|
|
/* allocate skb */
|
|
skb = dev_alloc_skb(size);
|
|
if (!skb) {
|
|
DBG_PRINT(INFO_DBG, "%s: Could not allocate skb\n",
|
|
ring->dev->name);
|
|
if (first_rxdp) {
|
|
wmb();
|
|
first_rxdp->Control_1 |= RXD_OWN_XENA;
|
|
}
|
|
swstats->mem_alloc_fail_cnt++;
|
|
|
|
return -ENOMEM ;
|
|
}
|
|
swstats->mem_allocated += skb->truesize;
|
|
|
|
if (ring->rxd_mode == RXD_MODE_1) {
|
|
/* 1 buffer mode - normal operation mode */
|
|
rxdp1 = (struct RxD1 *)rxdp;
|
|
memset(rxdp, 0, sizeof(struct RxD1));
|
|
skb_reserve(skb, NET_IP_ALIGN);
|
|
rxdp1->Buffer0_ptr =
|
|
pci_map_single(ring->pdev, skb->data,
|
|
size - NET_IP_ALIGN,
|
|
PCI_DMA_FROMDEVICE);
|
|
if (pci_dma_mapping_error(nic->pdev,
|
|
rxdp1->Buffer0_ptr))
|
|
goto pci_map_failed;
|
|
|
|
rxdp->Control_2 =
|
|
SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
|
|
rxdp->Host_Control = (unsigned long)skb;
|
|
} else if (ring->rxd_mode == RXD_MODE_3B) {
|
|
/*
|
|
* 2 buffer mode -
|
|
* 2 buffer mode provides 128
|
|
* byte aligned receive buffers.
|
|
*/
|
|
|
|
rxdp3 = (struct RxD3 *)rxdp;
|
|
/* save buffer pointers to avoid frequent dma mapping */
|
|
Buffer0_ptr = rxdp3->Buffer0_ptr;
|
|
Buffer1_ptr = rxdp3->Buffer1_ptr;
|
|
memset(rxdp, 0, sizeof(struct RxD3));
|
|
/* restore the buffer pointers for dma sync*/
|
|
rxdp3->Buffer0_ptr = Buffer0_ptr;
|
|
rxdp3->Buffer1_ptr = Buffer1_ptr;
|
|
|
|
ba = &ring->ba[block_no][off];
|
|
skb_reserve(skb, BUF0_LEN);
|
|
tmp = (u64)(unsigned long)skb->data;
|
|
tmp += ALIGN_SIZE;
|
|
tmp &= ~ALIGN_SIZE;
|
|
skb->data = (void *) (unsigned long)tmp;
|
|
skb_reset_tail_pointer(skb);
|
|
|
|
if (from_card_up) {
|
|
rxdp3->Buffer0_ptr =
|
|
pci_map_single(ring->pdev, ba->ba_0,
|
|
BUF0_LEN,
|
|
PCI_DMA_FROMDEVICE);
|
|
if (pci_dma_mapping_error(nic->pdev,
|
|
rxdp3->Buffer0_ptr))
|
|
goto pci_map_failed;
|
|
} else
|
|
pci_dma_sync_single_for_device(ring->pdev,
|
|
(dma_addr_t)rxdp3->Buffer0_ptr,
|
|
BUF0_LEN,
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
|
|
if (ring->rxd_mode == RXD_MODE_3B) {
|
|
/* Two buffer mode */
|
|
|
|
/*
|
|
* Buffer2 will have L3/L4 header plus
|
|
* L4 payload
|
|
*/
|
|
rxdp3->Buffer2_ptr = pci_map_single(ring->pdev,
|
|
skb->data,
|
|
ring->mtu + 4,
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
if (pci_dma_mapping_error(nic->pdev,
|
|
rxdp3->Buffer2_ptr))
|
|
goto pci_map_failed;
|
|
|
|
if (from_card_up) {
|
|
rxdp3->Buffer1_ptr =
|
|
pci_map_single(ring->pdev,
|
|
ba->ba_1,
|
|
BUF1_LEN,
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
if (pci_dma_mapping_error(nic->pdev,
|
|
rxdp3->Buffer1_ptr)) {
|
|
pci_unmap_single(ring->pdev,
|
|
(dma_addr_t)(unsigned long)
|
|
skb->data,
|
|
ring->mtu + 4,
|
|
PCI_DMA_FROMDEVICE);
|
|
goto pci_map_failed;
|
|
}
|
|
}
|
|
rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
|
|
rxdp->Control_2 |= SET_BUFFER2_SIZE_3
|
|
(ring->mtu + 4);
|
|
}
|
|
rxdp->Control_2 |= s2BIT(0);
|
|
rxdp->Host_Control = (unsigned long) (skb);
|
|
}
|
|
if (alloc_tab & ((1 << rxsync_frequency) - 1))
|
|
rxdp->Control_1 |= RXD_OWN_XENA;
|
|
off++;
|
|
if (off == (ring->rxd_count + 1))
|
|
off = 0;
|
|
ring->rx_curr_put_info.offset = off;
|
|
|
|
rxdp->Control_2 |= SET_RXD_MARKER;
|
|
if (!(alloc_tab & ((1 << rxsync_frequency) - 1))) {
|
|
if (first_rxdp) {
|
|
wmb();
|
|
first_rxdp->Control_1 |= RXD_OWN_XENA;
|
|
}
|
|
first_rxdp = rxdp;
|
|
}
|
|
ring->rx_bufs_left += 1;
|
|
alloc_tab++;
|
|
}
|
|
|
|
end:
|
|
/* Transfer ownership of first descriptor to adapter just before
|
|
* exiting. Before that, use memory barrier so that ownership
|
|
* and other fields are seen by adapter correctly.
|
|
*/
|
|
if (first_rxdp) {
|
|
wmb();
|
|
first_rxdp->Control_1 |= RXD_OWN_XENA;
|
|
}
|
|
|
|
return SUCCESS;
|
|
|
|
pci_map_failed:
|
|
swstats->pci_map_fail_cnt++;
|
|
swstats->mem_freed += skb->truesize;
|
|
dev_kfree_skb_irq(skb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void free_rxd_blk(struct s2io_nic *sp, int ring_no, int blk)
|
|
{
|
|
struct net_device *dev = sp->dev;
|
|
int j;
|
|
struct sk_buff *skb;
|
|
struct RxD_t *rxdp;
|
|
struct buffAdd *ba;
|
|
struct RxD1 *rxdp1;
|
|
struct RxD3 *rxdp3;
|
|
struct mac_info *mac_control = &sp->mac_control;
|
|
struct stat_block *stats = mac_control->stats_info;
|
|
struct swStat *swstats = &stats->sw_stat;
|
|
|
|
for (j = 0 ; j < rxd_count[sp->rxd_mode]; j++) {
|
|
rxdp = mac_control->rings[ring_no].
|
|
rx_blocks[blk].rxds[j].virt_addr;
|
|
skb = (struct sk_buff *)((unsigned long)rxdp->Host_Control);
|
|
if (!skb)
|
|
continue;
|
|
if (sp->rxd_mode == RXD_MODE_1) {
|
|
rxdp1 = (struct RxD1 *)rxdp;
|
|
pci_unmap_single(sp->pdev,
|
|
(dma_addr_t)rxdp1->Buffer0_ptr,
|
|
dev->mtu +
|
|
HEADER_ETHERNET_II_802_3_SIZE +
|
|
HEADER_802_2_SIZE + HEADER_SNAP_SIZE,
|
|
PCI_DMA_FROMDEVICE);
|
|
memset(rxdp, 0, sizeof(struct RxD1));
|
|
} else if (sp->rxd_mode == RXD_MODE_3B) {
|
|
rxdp3 = (struct RxD3 *)rxdp;
|
|
ba = &mac_control->rings[ring_no].ba[blk][j];
|
|
pci_unmap_single(sp->pdev,
|
|
(dma_addr_t)rxdp3->Buffer0_ptr,
|
|
BUF0_LEN,
|
|
PCI_DMA_FROMDEVICE);
|
|
pci_unmap_single(sp->pdev,
|
|
(dma_addr_t)rxdp3->Buffer1_ptr,
|
|
BUF1_LEN,
|
|
PCI_DMA_FROMDEVICE);
|
|
pci_unmap_single(sp->pdev,
|
|
(dma_addr_t)rxdp3->Buffer2_ptr,
|
|
dev->mtu + 4,
|
|
PCI_DMA_FROMDEVICE);
|
|
memset(rxdp, 0, sizeof(struct RxD3));
|
|
}
|
|
swstats->mem_freed += skb->truesize;
|
|
dev_kfree_skb(skb);
|
|
mac_control->rings[ring_no].rx_bufs_left -= 1;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* free_rx_buffers - Frees all Rx buffers
|
|
* @sp: device private variable.
|
|
* Description:
|
|
* This function will free all Rx buffers allocated by host.
|
|
* Return Value:
|
|
* NONE.
|
|
*/
|
|
|
|
static void free_rx_buffers(struct s2io_nic *sp)
|
|
{
|
|
struct net_device *dev = sp->dev;
|
|
int i, blk = 0, buf_cnt = 0;
|
|
struct config_param *config = &sp->config;
|
|
struct mac_info *mac_control = &sp->mac_control;
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
struct ring_info *ring = &mac_control->rings[i];
|
|
|
|
for (blk = 0; blk < rx_ring_sz[i]; blk++)
|
|
free_rxd_blk(sp, i, blk);
|
|
|
|
ring->rx_curr_put_info.block_index = 0;
|
|
ring->rx_curr_get_info.block_index = 0;
|
|
ring->rx_curr_put_info.offset = 0;
|
|
ring->rx_curr_get_info.offset = 0;
|
|
ring->rx_bufs_left = 0;
|
|
DBG_PRINT(INIT_DBG, "%s: Freed 0x%x Rx Buffers on ring%d\n",
|
|
dev->name, buf_cnt, i);
|
|
}
|
|
}
|
|
|
|
static int s2io_chk_rx_buffers(struct s2io_nic *nic, struct ring_info *ring)
|
|
{
|
|
if (fill_rx_buffers(nic, ring, 0) == -ENOMEM) {
|
|
DBG_PRINT(INFO_DBG, "%s: Out of memory in Rx Intr!!\n",
|
|
ring->dev->name);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* s2io_poll - Rx interrupt handler for NAPI support
|
|
* @napi : pointer to the napi structure.
|
|
* @budget : The number of packets that were budgeted to be processed
|
|
* during one pass through the 'Poll" function.
|
|
* Description:
|
|
* Comes into picture only if NAPI support has been incorporated. It does
|
|
* the same thing that rx_intr_handler does, but not in a interrupt context
|
|
* also It will process only a given number of packets.
|
|
* Return value:
|
|
* 0 on success and 1 if there are No Rx packets to be processed.
|
|
*/
|
|
|
|
static int s2io_poll_msix(struct napi_struct *napi, int budget)
|
|
{
|
|
struct ring_info *ring = container_of(napi, struct ring_info, napi);
|
|
struct net_device *dev = ring->dev;
|
|
int pkts_processed = 0;
|
|
u8 __iomem *addr = NULL;
|
|
u8 val8 = 0;
|
|
struct s2io_nic *nic = netdev_priv(dev);
|
|
struct XENA_dev_config __iomem *bar0 = nic->bar0;
|
|
int budget_org = budget;
|
|
|
|
if (unlikely(!is_s2io_card_up(nic)))
|
|
return 0;
|
|
|
|
pkts_processed = rx_intr_handler(ring, budget);
|
|
s2io_chk_rx_buffers(nic, ring);
|
|
|
|
if (pkts_processed < budget_org) {
|
|
napi_complete(napi);
|
|
/*Re Enable MSI-Rx Vector*/
|
|
addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
|
|
addr += 7 - ring->ring_no;
|
|
val8 = (ring->ring_no == 0) ? 0x3f : 0xbf;
|
|
writeb(val8, addr);
|
|
val8 = readb(addr);
|
|
}
|
|
return pkts_processed;
|
|
}
|
|
|
|
static int s2io_poll_inta(struct napi_struct *napi, int budget)
|
|
{
|
|
struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi);
|
|
int pkts_processed = 0;
|
|
int ring_pkts_processed, i;
|
|
struct XENA_dev_config __iomem *bar0 = nic->bar0;
|
|
int budget_org = budget;
|
|
struct config_param *config = &nic->config;
|
|
struct mac_info *mac_control = &nic->mac_control;
|
|
|
|
if (unlikely(!is_s2io_card_up(nic)))
|
|
return 0;
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
struct ring_info *ring = &mac_control->rings[i];
|
|
ring_pkts_processed = rx_intr_handler(ring, budget);
|
|
s2io_chk_rx_buffers(nic, ring);
|
|
pkts_processed += ring_pkts_processed;
|
|
budget -= ring_pkts_processed;
|
|
if (budget <= 0)
|
|
break;
|
|
}
|
|
if (pkts_processed < budget_org) {
|
|
napi_complete(napi);
|
|
/* Re enable the Rx interrupts for the ring */
|
|
writeq(0, &bar0->rx_traffic_mask);
|
|
readl(&bar0->rx_traffic_mask);
|
|
}
|
|
return pkts_processed;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
/**
|
|
* s2io_netpoll - netpoll event handler entry point
|
|
* @dev : pointer to the device structure.
|
|
* Description:
|
|
* This function will be called by upper layer to check for events on the
|
|
* interface in situations where interrupts are disabled. It is used for
|
|
* specific in-kernel networking tasks, such as remote consoles and kernel
|
|
* debugging over the network (example netdump in RedHat).
|
|
*/
|
|
static void s2io_netpoll(struct net_device *dev)
|
|
{
|
|
struct s2io_nic *nic = netdev_priv(dev);
|
|
struct XENA_dev_config __iomem *bar0 = nic->bar0;
|
|
u64 val64 = 0xFFFFFFFFFFFFFFFFULL;
|
|
int i;
|
|
struct config_param *config = &nic->config;
|
|
struct mac_info *mac_control = &nic->mac_control;
|
|
|
|
if (pci_channel_offline(nic->pdev))
|
|
return;
|
|
|
|
disable_irq(dev->irq);
|
|
|
|
writeq(val64, &bar0->rx_traffic_int);
|
|
writeq(val64, &bar0->tx_traffic_int);
|
|
|
|
/* we need to free up the transmitted skbufs or else netpoll will
|
|
* run out of skbs and will fail and eventually netpoll application such
|
|
* as netdump will fail.
|
|
*/
|
|
for (i = 0; i < config->tx_fifo_num; i++)
|
|
tx_intr_handler(&mac_control->fifos[i]);
|
|
|
|
/* check for received packet and indicate up to network */
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
struct ring_info *ring = &mac_control->rings[i];
|
|
|
|
rx_intr_handler(ring, 0);
|
|
}
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
struct ring_info *ring = &mac_control->rings[i];
|
|
|
|
if (fill_rx_buffers(nic, ring, 0) == -ENOMEM) {
|
|
DBG_PRINT(INFO_DBG,
|
|
"%s: Out of memory in Rx Netpoll!!\n",
|
|
dev->name);
|
|
break;
|
|
}
|
|
}
|
|
enable_irq(dev->irq);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* rx_intr_handler - Rx interrupt handler
|
|
* @ring_info: per ring structure.
|
|
* @budget: budget for napi processing.
|
|
* Description:
|
|
* If the interrupt is because of a received frame or if the
|
|
* receive ring contains fresh as yet un-processed frames,this function is
|
|
* called. It picks out the RxD at which place the last Rx processing had
|
|
* stopped and sends the skb to the OSM's Rx handler and then increments
|
|
* the offset.
|
|
* Return Value:
|
|
* No. of napi packets processed.
|
|
*/
|
|
static int rx_intr_handler(struct ring_info *ring_data, int budget)
|
|
{
|
|
int get_block, put_block;
|
|
struct rx_curr_get_info get_info, put_info;
|
|
struct RxD_t *rxdp;
|
|
struct sk_buff *skb;
|
|
int pkt_cnt = 0, napi_pkts = 0;
|
|
int i;
|
|
struct RxD1 *rxdp1;
|
|
struct RxD3 *rxdp3;
|
|
|
|
get_info = ring_data->rx_curr_get_info;
|
|
get_block = get_info.block_index;
|
|
memcpy(&put_info, &ring_data->rx_curr_put_info, sizeof(put_info));
|
|
put_block = put_info.block_index;
|
|
rxdp = ring_data->rx_blocks[get_block].rxds[get_info.offset].virt_addr;
|
|
|
|
while (RXD_IS_UP2DT(rxdp)) {
|
|
/*
|
|
* If your are next to put index then it's
|
|
* FIFO full condition
|
|
*/
|
|
if ((get_block == put_block) &&
|
|
(get_info.offset + 1) == put_info.offset) {
|
|
DBG_PRINT(INTR_DBG, "%s: Ring Full\n",
|
|
ring_data->dev->name);
|
|
break;
|
|
}
|
|
skb = (struct sk_buff *)((unsigned long)rxdp->Host_Control);
|
|
if (skb == NULL) {
|
|
DBG_PRINT(ERR_DBG, "%s: NULL skb in Rx Intr\n",
|
|
ring_data->dev->name);
|
|
return 0;
|
|
}
|
|
if (ring_data->rxd_mode == RXD_MODE_1) {
|
|
rxdp1 = (struct RxD1 *)rxdp;
|
|
pci_unmap_single(ring_data->pdev, (dma_addr_t)
|
|
rxdp1->Buffer0_ptr,
|
|
ring_data->mtu +
|
|
HEADER_ETHERNET_II_802_3_SIZE +
|
|
HEADER_802_2_SIZE +
|
|
HEADER_SNAP_SIZE,
|
|
PCI_DMA_FROMDEVICE);
|
|
} else if (ring_data->rxd_mode == RXD_MODE_3B) {
|
|
rxdp3 = (struct RxD3 *)rxdp;
|
|
pci_dma_sync_single_for_cpu(ring_data->pdev,
|
|
(dma_addr_t)rxdp3->Buffer0_ptr,
|
|
BUF0_LEN,
|
|
PCI_DMA_FROMDEVICE);
|
|
pci_unmap_single(ring_data->pdev,
|
|
(dma_addr_t)rxdp3->Buffer2_ptr,
|
|
ring_data->mtu + 4,
|
|
PCI_DMA_FROMDEVICE);
|
|
}
|
|
prefetch(skb->data);
|
|
rx_osm_handler(ring_data, rxdp);
|
|
get_info.offset++;
|
|
ring_data->rx_curr_get_info.offset = get_info.offset;
|
|
rxdp = ring_data->rx_blocks[get_block].
|
|
rxds[get_info.offset].virt_addr;
|
|
if (get_info.offset == rxd_count[ring_data->rxd_mode]) {
|
|
get_info.offset = 0;
|
|
ring_data->rx_curr_get_info.offset = get_info.offset;
|
|
get_block++;
|
|
if (get_block == ring_data->block_count)
|
|
get_block = 0;
|
|
ring_data->rx_curr_get_info.block_index = get_block;
|
|
rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
|
|
}
|
|
|
|
if (ring_data->nic->config.napi) {
|
|
budget--;
|
|
napi_pkts++;
|
|
if (!budget)
|
|
break;
|
|
}
|
|
pkt_cnt++;
|
|
if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts))
|
|
break;
|
|
}
|
|
if (ring_data->lro) {
|
|
/* Clear all LRO sessions before exiting */
|
|
for (i = 0; i < MAX_LRO_SESSIONS; i++) {
|
|
struct lro *lro = &ring_data->lro0_n[i];
|
|
if (lro->in_use) {
|
|
update_L3L4_header(ring_data->nic, lro);
|
|
queue_rx_frame(lro->parent, lro->vlan_tag);
|
|
clear_lro_session(lro);
|
|
}
|
|
}
|
|
}
|
|
return napi_pkts;
|
|
}
|
|
|
|
/**
|
|
* tx_intr_handler - Transmit interrupt handler
|
|
* @nic : device private variable
|
|
* Description:
|
|
* If an interrupt was raised to indicate DMA complete of the
|
|
* Tx packet, this function is called. It identifies the last TxD
|
|
* whose buffer was freed and frees all skbs whose data have already
|
|
* DMA'ed into the NICs internal memory.
|
|
* Return Value:
|
|
* NONE
|
|
*/
|
|
|
|
static void tx_intr_handler(struct fifo_info *fifo_data)
|
|
{
|
|
struct s2io_nic *nic = fifo_data->nic;
|
|
struct tx_curr_get_info get_info, put_info;
|
|
struct sk_buff *skb = NULL;
|
|
struct TxD *txdlp;
|
|
int pkt_cnt = 0;
|
|
unsigned long flags = 0;
|
|
u8 err_mask;
|
|
struct stat_block *stats = nic->mac_control.stats_info;
|
|
struct swStat *swstats = &stats->sw_stat;
|
|
|
|
if (!spin_trylock_irqsave(&fifo_data->tx_lock, flags))
|
|
return;
|
|
|
|
get_info = fifo_data->tx_curr_get_info;
|
|
memcpy(&put_info, &fifo_data->tx_curr_put_info, sizeof(put_info));
|
|
txdlp = (struct TxD *)
|
|
fifo_data->list_info[get_info.offset].list_virt_addr;
|
|
while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
|
|
(get_info.offset != put_info.offset) &&
|
|
(txdlp->Host_Control)) {
|
|
/* Check for TxD errors */
|
|
if (txdlp->Control_1 & TXD_T_CODE) {
|
|
unsigned long long err;
|
|
err = txdlp->Control_1 & TXD_T_CODE;
|
|
if (err & 0x1) {
|
|
swstats->parity_err_cnt++;
|
|
}
|
|
|
|
/* update t_code statistics */
|
|
err_mask = err >> 48;
|
|
switch (err_mask) {
|
|
case 2:
|
|
swstats->tx_buf_abort_cnt++;
|
|
break;
|
|
|
|
case 3:
|
|
swstats->tx_desc_abort_cnt++;
|
|
break;
|
|
|
|
case 7:
|
|
swstats->tx_parity_err_cnt++;
|
|
break;
|
|
|
|
case 10:
|
|
swstats->tx_link_loss_cnt++;
|
|
break;
|
|
|
|
case 15:
|
|
swstats->tx_list_proc_err_cnt++;
|
|
break;
|
|
}
|
|
}
|
|
|
|
skb = s2io_txdl_getskb(fifo_data, txdlp, get_info.offset);
|
|
if (skb == NULL) {
|
|
spin_unlock_irqrestore(&fifo_data->tx_lock, flags);
|
|
DBG_PRINT(ERR_DBG, "%s: NULL skb in Tx Free Intr\n",
|
|
__func__);
|
|
return;
|
|
}
|
|
pkt_cnt++;
|
|
|
|
/* Updating the statistics block */
|
|
nic->dev->stats.tx_bytes += skb->len;
|
|
swstats->mem_freed += skb->truesize;
|
|
dev_kfree_skb_irq(skb);
|
|
|
|
get_info.offset++;
|
|
if (get_info.offset == get_info.fifo_len + 1)
|
|
get_info.offset = 0;
|
|
txdlp = (struct TxD *)
|
|
fifo_data->list_info[get_info.offset].list_virt_addr;
|
|
fifo_data->tx_curr_get_info.offset = get_info.offset;
|
|
}
|
|
|
|
s2io_wake_tx_queue(fifo_data, pkt_cnt, nic->config.multiq);
|
|
|
|
spin_unlock_irqrestore(&fifo_data->tx_lock, flags);
|
|
}
|
|
|
|
/**
|
|
* s2io_mdio_write - Function to write in to MDIO registers
|
|
* @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS)
|
|
* @addr : address value
|
|
* @value : data value
|
|
* @dev : pointer to net_device structure
|
|
* Description:
|
|
* This function is used to write values to the MDIO registers
|
|
* NONE
|
|
*/
|
|
static void s2io_mdio_write(u32 mmd_type, u64 addr, u16 value,
|
|
struct net_device *dev)
|
|
{
|
|
u64 val64;
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
|
|
/* address transaction */
|
|
val64 = MDIO_MMD_INDX_ADDR(addr) |
|
|
MDIO_MMD_DEV_ADDR(mmd_type) |
|
|
MDIO_MMS_PRT_ADDR(0x0);
|
|
writeq(val64, &bar0->mdio_control);
|
|
val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
|
|
writeq(val64, &bar0->mdio_control);
|
|
udelay(100);
|
|
|
|
/* Data transaction */
|
|
val64 = MDIO_MMD_INDX_ADDR(addr) |
|
|
MDIO_MMD_DEV_ADDR(mmd_type) |
|
|
MDIO_MMS_PRT_ADDR(0x0) |
|
|
MDIO_MDIO_DATA(value) |
|
|
MDIO_OP(MDIO_OP_WRITE_TRANS);
|
|
writeq(val64, &bar0->mdio_control);
|
|
val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
|
|
writeq(val64, &bar0->mdio_control);
|
|
udelay(100);
|
|
|
|
val64 = MDIO_MMD_INDX_ADDR(addr) |
|
|
MDIO_MMD_DEV_ADDR(mmd_type) |
|
|
MDIO_MMS_PRT_ADDR(0x0) |
|
|
MDIO_OP(MDIO_OP_READ_TRANS);
|
|
writeq(val64, &bar0->mdio_control);
|
|
val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
|
|
writeq(val64, &bar0->mdio_control);
|
|
udelay(100);
|
|
}
|
|
|
|
/**
|
|
* s2io_mdio_read - Function to write in to MDIO registers
|
|
* @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS)
|
|
* @addr : address value
|
|
* @dev : pointer to net_device structure
|
|
* Description:
|
|
* This function is used to read values to the MDIO registers
|
|
* NONE
|
|
*/
|
|
static u64 s2io_mdio_read(u32 mmd_type, u64 addr, struct net_device *dev)
|
|
{
|
|
u64 val64 = 0x0;
|
|
u64 rval64 = 0x0;
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
|
|
/* address transaction */
|
|
val64 = val64 | (MDIO_MMD_INDX_ADDR(addr)
|
|
| MDIO_MMD_DEV_ADDR(mmd_type)
|
|
| MDIO_MMS_PRT_ADDR(0x0));
|
|
writeq(val64, &bar0->mdio_control);
|
|
val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
|
|
writeq(val64, &bar0->mdio_control);
|
|
udelay(100);
|
|
|
|
/* Data transaction */
|
|
val64 = MDIO_MMD_INDX_ADDR(addr) |
|
|
MDIO_MMD_DEV_ADDR(mmd_type) |
|
|
MDIO_MMS_PRT_ADDR(0x0) |
|
|
MDIO_OP(MDIO_OP_READ_TRANS);
|
|
writeq(val64, &bar0->mdio_control);
|
|
val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
|
|
writeq(val64, &bar0->mdio_control);
|
|
udelay(100);
|
|
|
|
/* Read the value from regs */
|
|
rval64 = readq(&bar0->mdio_control);
|
|
rval64 = rval64 & 0xFFFF0000;
|
|
rval64 = rval64 >> 16;
|
|
return rval64;
|
|
}
|
|
|
|
/**
|
|
* s2io_chk_xpak_counter - Function to check the status of the xpak counters
|
|
* @counter : couter value to be updated
|
|
* @flag : flag to indicate the status
|
|
* @type : counter type
|
|
* Description:
|
|
* This function is to check the status of the xpak counters value
|
|
* NONE
|
|
*/
|
|
|
|
static void s2io_chk_xpak_counter(u64 *counter, u64 * regs_stat, u32 index,
|
|
u16 flag, u16 type)
|
|
{
|
|
u64 mask = 0x3;
|
|
u64 val64;
|
|
int i;
|
|
for (i = 0; i < index; i++)
|
|
mask = mask << 0x2;
|
|
|
|
if (flag > 0) {
|
|
*counter = *counter + 1;
|
|
val64 = *regs_stat & mask;
|
|
val64 = val64 >> (index * 0x2);
|
|
val64 = val64 + 1;
|
|
if (val64 == 3) {
|
|
switch (type) {
|
|
case 1:
|
|
DBG_PRINT(ERR_DBG,
|
|
"Take Xframe NIC out of service.\n");
|
|
DBG_PRINT(ERR_DBG,
|
|
"Excessive temperatures may result in premature transceiver failure.\n");
|
|
break;
|
|
case 2:
|
|
DBG_PRINT(ERR_DBG,
|
|
"Take Xframe NIC out of service.\n");
|
|
DBG_PRINT(ERR_DBG,
|
|
"Excessive bias currents may indicate imminent laser diode failure.\n");
|
|
break;
|
|
case 3:
|
|
DBG_PRINT(ERR_DBG,
|
|
"Take Xframe NIC out of service.\n");
|
|
DBG_PRINT(ERR_DBG,
|
|
"Excessive laser output power may saturate far-end receiver.\n");
|
|
break;
|
|
default:
|
|
DBG_PRINT(ERR_DBG,
|
|
"Incorrect XPAK Alarm type\n");
|
|
}
|
|
val64 = 0x0;
|
|
}
|
|
val64 = val64 << (index * 0x2);
|
|
*regs_stat = (*regs_stat & (~mask)) | (val64);
|
|
|
|
} else {
|
|
*regs_stat = *regs_stat & (~mask);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* s2io_updt_xpak_counter - Function to update the xpak counters
|
|
* @dev : pointer to net_device struct
|
|
* Description:
|
|
* This function is to upate the status of the xpak counters value
|
|
* NONE
|
|
*/
|
|
static void s2io_updt_xpak_counter(struct net_device *dev)
|
|
{
|
|
u16 flag = 0x0;
|
|
u16 type = 0x0;
|
|
u16 val16 = 0x0;
|
|
u64 val64 = 0x0;
|
|
u64 addr = 0x0;
|
|
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
struct stat_block *stats = sp->mac_control.stats_info;
|
|
struct xpakStat *xstats = &stats->xpak_stat;
|
|
|
|
/* Check the communication with the MDIO slave */
|
|
addr = MDIO_CTRL1;
|
|
val64 = 0x0;
|
|
val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
|
|
if ((val64 == 0xFFFF) || (val64 == 0x0000)) {
|
|
DBG_PRINT(ERR_DBG,
|
|
"ERR: MDIO slave access failed - Returned %llx\n",
|
|
(unsigned long long)val64);
|
|
return;
|
|
}
|
|
|
|
/* Check for the expected value of control reg 1 */
|
|
if (val64 != MDIO_CTRL1_SPEED10G) {
|
|
DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - "
|
|
"Returned: %llx- Expected: 0x%x\n",
|
|
(unsigned long long)val64, MDIO_CTRL1_SPEED10G);
|
|
return;
|
|
}
|
|
|
|
/* Loading the DOM register to MDIO register */
|
|
addr = 0xA100;
|
|
s2io_mdio_write(MDIO_MMD_PMAPMD, addr, val16, dev);
|
|
val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
|
|
|
|
/* Reading the Alarm flags */
|
|
addr = 0xA070;
|
|
val64 = 0x0;
|
|
val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
|
|
|
|
flag = CHECKBIT(val64, 0x7);
|
|
type = 1;
|
|
s2io_chk_xpak_counter(&xstats->alarm_transceiver_temp_high,
|
|
&xstats->xpak_regs_stat,
|
|
0x0, flag, type);
|
|
|
|
if (CHECKBIT(val64, 0x6))
|
|
xstats->alarm_transceiver_temp_low++;
|
|
|
|
flag = CHECKBIT(val64, 0x3);
|
|
type = 2;
|
|
s2io_chk_xpak_counter(&xstats->alarm_laser_bias_current_high,
|
|
&xstats->xpak_regs_stat,
|
|
0x2, flag, type);
|
|
|
|
if (CHECKBIT(val64, 0x2))
|
|
xstats->alarm_laser_bias_current_low++;
|
|
|
|
flag = CHECKBIT(val64, 0x1);
|
|
type = 3;
|
|
s2io_chk_xpak_counter(&xstats->alarm_laser_output_power_high,
|
|
&xstats->xpak_regs_stat,
|
|
0x4, flag, type);
|
|
|
|
if (CHECKBIT(val64, 0x0))
|
|
xstats->alarm_laser_output_power_low++;
|
|
|
|
/* Reading the Warning flags */
|
|
addr = 0xA074;
|
|
val64 = 0x0;
|
|
val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
|
|
|
|
if (CHECKBIT(val64, 0x7))
|
|
xstats->warn_transceiver_temp_high++;
|
|
|
|
if (CHECKBIT(val64, 0x6))
|
|
xstats->warn_transceiver_temp_low++;
|
|
|
|
if (CHECKBIT(val64, 0x3))
|
|
xstats->warn_laser_bias_current_high++;
|
|
|
|
if (CHECKBIT(val64, 0x2))
|
|
xstats->warn_laser_bias_current_low++;
|
|
|
|
if (CHECKBIT(val64, 0x1))
|
|
xstats->warn_laser_output_power_high++;
|
|
|
|
if (CHECKBIT(val64, 0x0))
|
|
xstats->warn_laser_output_power_low++;
|
|
}
|
|
|
|
/**
|
|
* wait_for_cmd_complete - waits for a command to complete.
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
* s2io_nic structure.
|
|
* Description: Function that waits for a command to Write into RMAC
|
|
* ADDR DATA registers to be completed and returns either success or
|
|
* error depending on whether the command was complete or not.
|
|
* Return value:
|
|
* SUCCESS on success and FAILURE on failure.
|
|
*/
|
|
|
|
static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit,
|
|
int bit_state)
|
|
{
|
|
int ret = FAILURE, cnt = 0, delay = 1;
|
|
u64 val64;
|
|
|
|
if ((bit_state != S2IO_BIT_RESET) && (bit_state != S2IO_BIT_SET))
|
|
return FAILURE;
|
|
|
|
do {
|
|
val64 = readq(addr);
|
|
if (bit_state == S2IO_BIT_RESET) {
|
|
if (!(val64 & busy_bit)) {
|
|
ret = SUCCESS;
|
|
break;
|
|
}
|
|
} else {
|
|
if (!(val64 & busy_bit)) {
|
|
ret = SUCCESS;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (in_interrupt())
|
|
mdelay(delay);
|
|
else
|
|
msleep(delay);
|
|
|
|
if (++cnt >= 10)
|
|
delay = 50;
|
|
} while (cnt < 20);
|
|
return ret;
|
|
}
|
|
/*
|
|
* check_pci_device_id - Checks if the device id is supported
|
|
* @id : device id
|
|
* Description: Function to check if the pci device id is supported by driver.
|
|
* Return value: Actual device id if supported else PCI_ANY_ID
|
|
*/
|
|
static u16 check_pci_device_id(u16 id)
|
|
{
|
|
switch (id) {
|
|
case PCI_DEVICE_ID_HERC_WIN:
|
|
case PCI_DEVICE_ID_HERC_UNI:
|
|
return XFRAME_II_DEVICE;
|
|
case PCI_DEVICE_ID_S2IO_UNI:
|
|
case PCI_DEVICE_ID_S2IO_WIN:
|
|
return XFRAME_I_DEVICE;
|
|
default:
|
|
return PCI_ANY_ID;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* s2io_reset - Resets the card.
|
|
* @sp : private member of the device structure.
|
|
* Description: Function to Reset the card. This function then also
|
|
* restores the previously saved PCI configuration space registers as
|
|
* the card reset also resets the configuration space.
|
|
* Return value:
|
|
* void.
|
|
*/
|
|
|
|
static void s2io_reset(struct s2io_nic *sp)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
u64 val64;
|
|
u16 subid, pci_cmd;
|
|
int i;
|
|
u16 val16;
|
|
unsigned long long up_cnt, down_cnt, up_time, down_time, reset_cnt;
|
|
unsigned long long mem_alloc_cnt, mem_free_cnt, watchdog_cnt;
|
|
struct stat_block *stats;
|
|
struct swStat *swstats;
|
|
|
|
DBG_PRINT(INIT_DBG, "%s: Resetting XFrame card %s\n",
|
|
__func__, sp->dev->name);
|
|
|
|
/* Back up the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
|
|
pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
|
|
|
|
val64 = SW_RESET_ALL;
|
|
writeq(val64, &bar0->sw_reset);
|
|
if (strstr(sp->product_name, "CX4"))
|
|
msleep(750);
|
|
msleep(250);
|
|
for (i = 0; i < S2IO_MAX_PCI_CONFIG_SPACE_REINIT; i++) {
|
|
|
|
/* Restore the PCI state saved during initialization. */
|
|
pci_restore_state(sp->pdev);
|
|
pci_save_state(sp->pdev);
|
|
pci_read_config_word(sp->pdev, 0x2, &val16);
|
|
if (check_pci_device_id(val16) != (u16)PCI_ANY_ID)
|
|
break;
|
|
msleep(200);
|
|
}
|
|
|
|
if (check_pci_device_id(val16) == (u16)PCI_ANY_ID)
|
|
DBG_PRINT(ERR_DBG, "%s SW_Reset failed!\n", __func__);
|
|
|
|
pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, pci_cmd);
|
|
|
|
s2io_init_pci(sp);
|
|
|
|
/* Set swapper to enable I/O register access */
|
|
s2io_set_swapper(sp);
|
|
|
|
/* restore mac_addr entries */
|
|
do_s2io_restore_unicast_mc(sp);
|
|
|
|
/* Restore the MSIX table entries from local variables */
|
|
restore_xmsi_data(sp);
|
|
|
|
/* Clear certain PCI/PCI-X fields after reset */
|
|
if (sp->device_type == XFRAME_II_DEVICE) {
|
|
/* Clear "detected parity error" bit */
|
|
pci_write_config_word(sp->pdev, PCI_STATUS, 0x8000);
|
|
|
|
/* Clearing PCIX Ecc status register */
|
|
pci_write_config_dword(sp->pdev, 0x68, 0x7C);
|
|
|
|
/* Clearing PCI_STATUS error reflected here */
|
|
writeq(s2BIT(62), &bar0->txpic_int_reg);
|
|
}
|
|
|
|
/* Reset device statistics maintained by OS */
|
|
memset(&sp->stats, 0, sizeof(struct net_device_stats));
|
|
|
|
stats = sp->mac_control.stats_info;
|
|
swstats = &stats->sw_stat;
|
|
|
|
/* save link up/down time/cnt, reset/memory/watchdog cnt */
|
|
up_cnt = swstats->link_up_cnt;
|
|
down_cnt = swstats->link_down_cnt;
|
|
up_time = swstats->link_up_time;
|
|
down_time = swstats->link_down_time;
|
|
reset_cnt = swstats->soft_reset_cnt;
|
|
mem_alloc_cnt = swstats->mem_allocated;
|
|
mem_free_cnt = swstats->mem_freed;
|
|
watchdog_cnt = swstats->watchdog_timer_cnt;
|
|
|
|
memset(stats, 0, sizeof(struct stat_block));
|
|
|
|
/* restore link up/down time/cnt, reset/memory/watchdog cnt */
|
|
swstats->link_up_cnt = up_cnt;
|
|
swstats->link_down_cnt = down_cnt;
|
|
swstats->link_up_time = up_time;
|
|
swstats->link_down_time = down_time;
|
|
swstats->soft_reset_cnt = reset_cnt;
|
|
swstats->mem_allocated = mem_alloc_cnt;
|
|
swstats->mem_freed = mem_free_cnt;
|
|
swstats->watchdog_timer_cnt = watchdog_cnt;
|
|
|
|
/* SXE-002: Configure link and activity LED to turn it off */
|
|
subid = sp->pdev->subsystem_device;
|
|
if (((subid & 0xFF) >= 0x07) &&
|
|
(sp->device_type == XFRAME_I_DEVICE)) {
|
|
val64 = readq(&bar0->gpio_control);
|
|
val64 |= 0x0000800000000000ULL;
|
|
writeq(val64, &bar0->gpio_control);
|
|
val64 = 0x0411040400000000ULL;
|
|
writeq(val64, (void __iomem *)bar0 + 0x2700);
|
|
}
|
|
|
|
/*
|
|
* Clear spurious ECC interrupts that would have occured on
|
|
* XFRAME II cards after reset.
|
|
*/
|
|
if (sp->device_type == XFRAME_II_DEVICE) {
|
|
val64 = readq(&bar0->pcc_err_reg);
|
|
writeq(val64, &bar0->pcc_err_reg);
|
|
}
|
|
|
|
sp->device_enabled_once = false;
|
|
}
|
|
|
|
/**
|
|
* s2io_set_swapper - to set the swapper controle on the card
|
|
* @sp : private member of the device structure,
|
|
* pointer to the s2io_nic structure.
|
|
* Description: Function to set the swapper control on the card
|
|
* correctly depending on the 'endianness' of the system.
|
|
* Return value:
|
|
* SUCCESS on success and FAILURE on failure.
|
|
*/
|
|
|
|
static int s2io_set_swapper(struct s2io_nic *sp)
|
|
{
|
|
struct net_device *dev = sp->dev;
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
u64 val64, valt, valr;
|
|
|
|
/*
|
|
* Set proper endian settings and verify the same by reading
|
|
* the PIF Feed-back register.
|
|
*/
|
|
|
|
val64 = readq(&bar0->pif_rd_swapper_fb);
|
|
if (val64 != 0x0123456789ABCDEFULL) {
|
|
int i = 0;
|
|
u64 value[] = { 0xC30000C3C30000C3ULL, /* FE=1, SE=1 */
|
|
0x8100008181000081ULL, /* FE=1, SE=0 */
|
|
0x4200004242000042ULL, /* FE=0, SE=1 */
|
|
0}; /* FE=0, SE=0 */
|
|
|
|
while (i < 4) {
|
|
writeq(value[i], &bar0->swapper_ctrl);
|
|
val64 = readq(&bar0->pif_rd_swapper_fb);
|
|
if (val64 == 0x0123456789ABCDEFULL)
|
|
break;
|
|
i++;
|
|
}
|
|
if (i == 4) {
|
|
DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, "
|
|
"feedback read %llx\n",
|
|
dev->name, (unsigned long long)val64);
|
|
return FAILURE;
|
|
}
|
|
valr = value[i];
|
|
} else {
|
|
valr = readq(&bar0->swapper_ctrl);
|
|
}
|
|
|
|
valt = 0x0123456789ABCDEFULL;
|
|
writeq(valt, &bar0->xmsi_address);
|
|
val64 = readq(&bar0->xmsi_address);
|
|
|
|
if (val64 != valt) {
|
|
int i = 0;
|
|
u64 value[] = { 0x00C3C30000C3C300ULL, /* FE=1, SE=1 */
|
|
0x0081810000818100ULL, /* FE=1, SE=0 */
|
|
0x0042420000424200ULL, /* FE=0, SE=1 */
|
|
0}; /* FE=0, SE=0 */
|
|
|
|
while (i < 4) {
|
|
writeq((value[i] | valr), &bar0->swapper_ctrl);
|
|
writeq(valt, &bar0->xmsi_address);
|
|
val64 = readq(&bar0->xmsi_address);
|
|
if (val64 == valt)
|
|
break;
|
|
i++;
|
|
}
|
|
if (i == 4) {
|
|
unsigned long long x = val64;
|
|
DBG_PRINT(ERR_DBG,
|
|
"Write failed, Xmsi_addr reads:0x%llx\n", x);
|
|
return FAILURE;
|
|
}
|
|
}
|
|
val64 = readq(&bar0->swapper_ctrl);
|
|
val64 &= 0xFFFF000000000000ULL;
|
|
|
|
#ifdef __BIG_ENDIAN
|
|
/*
|
|
* The device by default set to a big endian format, so a
|
|
* big endian driver need not set anything.
|
|
*/
|
|
val64 |= (SWAPPER_CTRL_TXP_FE |
|
|
SWAPPER_CTRL_TXP_SE |
|
|
SWAPPER_CTRL_TXD_R_FE |
|
|
SWAPPER_CTRL_TXD_W_FE |
|
|
SWAPPER_CTRL_TXF_R_FE |
|
|
SWAPPER_CTRL_RXD_R_FE |
|
|
SWAPPER_CTRL_RXD_W_FE |
|
|
SWAPPER_CTRL_RXF_W_FE |
|
|
SWAPPER_CTRL_XMSI_FE |
|
|
SWAPPER_CTRL_STATS_FE |
|
|
SWAPPER_CTRL_STATS_SE);
|
|
if (sp->config.intr_type == INTA)
|
|
val64 |= SWAPPER_CTRL_XMSI_SE;
|
|
writeq(val64, &bar0->swapper_ctrl);
|
|
#else
|
|
/*
|
|
* Initially we enable all bits to make it accessible by the
|
|
* driver, then we selectively enable only those bits that
|
|
* we want to set.
|
|
*/
|
|
val64 |= (SWAPPER_CTRL_TXP_FE |
|
|
SWAPPER_CTRL_TXP_SE |
|
|
SWAPPER_CTRL_TXD_R_FE |
|
|
SWAPPER_CTRL_TXD_R_SE |
|
|
SWAPPER_CTRL_TXD_W_FE |
|
|
SWAPPER_CTRL_TXD_W_SE |
|
|
SWAPPER_CTRL_TXF_R_FE |
|
|
SWAPPER_CTRL_RXD_R_FE |
|
|
SWAPPER_CTRL_RXD_R_SE |
|
|
SWAPPER_CTRL_RXD_W_FE |
|
|
SWAPPER_CTRL_RXD_W_SE |
|
|
SWAPPER_CTRL_RXF_W_FE |
|
|
SWAPPER_CTRL_XMSI_FE |
|
|
SWAPPER_CTRL_STATS_FE |
|
|
SWAPPER_CTRL_STATS_SE);
|
|
if (sp->config.intr_type == INTA)
|
|
val64 |= SWAPPER_CTRL_XMSI_SE;
|
|
writeq(val64, &bar0->swapper_ctrl);
|
|
#endif
|
|
val64 = readq(&bar0->swapper_ctrl);
|
|
|
|
/*
|
|
* Verifying if endian settings are accurate by reading a
|
|
* feedback register.
|
|
*/
|
|
val64 = readq(&bar0->pif_rd_swapper_fb);
|
|
if (val64 != 0x0123456789ABCDEFULL) {
|
|
/* Endian settings are incorrect, calls for another dekko. */
|
|
DBG_PRINT(ERR_DBG,
|
|
"%s: Endian settings are wrong, feedback read %llx\n",
|
|
dev->name, (unsigned long long)val64);
|
|
return FAILURE;
|
|
}
|
|
|
|
return SUCCESS;
|
|
}
|
|
|
|
static int wait_for_msix_trans(struct s2io_nic *nic, int i)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = nic->bar0;
|
|
u64 val64;
|
|
int ret = 0, cnt = 0;
|
|
|
|
do {
|
|
val64 = readq(&bar0->xmsi_access);
|
|
if (!(val64 & s2BIT(15)))
|
|
break;
|
|
mdelay(1);
|
|
cnt++;
|
|
} while (cnt < 5);
|
|
if (cnt == 5) {
|
|
DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i);
|
|
ret = 1;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void restore_xmsi_data(struct s2io_nic *nic)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = nic->bar0;
|
|
u64 val64;
|
|
int i, msix_index;
|
|
|
|
if (nic->device_type == XFRAME_I_DEVICE)
|
|
return;
|
|
|
|
for (i = 0; i < MAX_REQUESTED_MSI_X; i++) {
|
|
msix_index = (i) ? ((i-1) * 8 + 1) : 0;
|
|
writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
|
|
writeq(nic->msix_info[i].data, &bar0->xmsi_data);
|
|
val64 = (s2BIT(7) | s2BIT(15) | vBIT(msix_index, 26, 6));
|
|
writeq(val64, &bar0->xmsi_access);
|
|
if (wait_for_msix_trans(nic, msix_index)) {
|
|
DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",
|
|
__func__, msix_index);
|
|
continue;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void store_xmsi_data(struct s2io_nic *nic)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = nic->bar0;
|
|
u64 val64, addr, data;
|
|
int i, msix_index;
|
|
|
|
if (nic->device_type == XFRAME_I_DEVICE)
|
|
return;
|
|
|
|
/* Store and display */
|
|
for (i = 0; i < MAX_REQUESTED_MSI_X; i++) {
|
|
msix_index = (i) ? ((i-1) * 8 + 1) : 0;
|
|
val64 = (s2BIT(15) | vBIT(msix_index, 26, 6));
|
|
writeq(val64, &bar0->xmsi_access);
|
|
if (wait_for_msix_trans(nic, msix_index)) {
|
|
DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",
|
|
__func__, msix_index);
|
|
continue;
|
|
}
|
|
addr = readq(&bar0->xmsi_address);
|
|
data = readq(&bar0->xmsi_data);
|
|
if (addr && data) {
|
|
nic->msix_info[i].addr = addr;
|
|
nic->msix_info[i].data = data;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int s2io_enable_msi_x(struct s2io_nic *nic)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = nic->bar0;
|
|
u64 rx_mat;
|
|
u16 msi_control; /* Temp variable */
|
|
int ret, i, j, msix_indx = 1;
|
|
int size;
|
|
struct stat_block *stats = nic->mac_control.stats_info;
|
|
struct swStat *swstats = &stats->sw_stat;
|
|
|
|
size = nic->num_entries * sizeof(struct msix_entry);
|
|
nic->entries = kzalloc(size, GFP_KERNEL);
|
|
if (!nic->entries) {
|
|
DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
|
|
__func__);
|
|
swstats->mem_alloc_fail_cnt++;
|
|
return -ENOMEM;
|
|
}
|
|
swstats->mem_allocated += size;
|
|
|
|
size = nic->num_entries * sizeof(struct s2io_msix_entry);
|
|
nic->s2io_entries = kzalloc(size, GFP_KERNEL);
|
|
if (!nic->s2io_entries) {
|
|
DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
|
|
__func__);
|
|
swstats->mem_alloc_fail_cnt++;
|
|
kfree(nic->entries);
|
|
swstats->mem_freed
|
|
+= (nic->num_entries * sizeof(struct msix_entry));
|
|
return -ENOMEM;
|
|
}
|
|
swstats->mem_allocated += size;
|
|
|
|
nic->entries[0].entry = 0;
|
|
nic->s2io_entries[0].entry = 0;
|
|
nic->s2io_entries[0].in_use = MSIX_FLG;
|
|
nic->s2io_entries[0].type = MSIX_ALARM_TYPE;
|
|
nic->s2io_entries[0].arg = &nic->mac_control.fifos;
|
|
|
|
for (i = 1; i < nic->num_entries; i++) {
|
|
nic->entries[i].entry = ((i - 1) * 8) + 1;
|
|
nic->s2io_entries[i].entry = ((i - 1) * 8) + 1;
|
|
nic->s2io_entries[i].arg = NULL;
|
|
nic->s2io_entries[i].in_use = 0;
|
|
}
|
|
|
|
rx_mat = readq(&bar0->rx_mat);
|
|
for (j = 0; j < nic->config.rx_ring_num; j++) {
|
|
rx_mat |= RX_MAT_SET(j, msix_indx);
|
|
nic->s2io_entries[j+1].arg = &nic->mac_control.rings[j];
|
|
nic->s2io_entries[j+1].type = MSIX_RING_TYPE;
|
|
nic->s2io_entries[j+1].in_use = MSIX_FLG;
|
|
msix_indx += 8;
|
|
}
|
|
writeq(rx_mat, &bar0->rx_mat);
|
|
readq(&bar0->rx_mat);
|
|
|
|
ret = pci_enable_msix(nic->pdev, nic->entries, nic->num_entries);
|
|
/* We fail init if error or we get less vectors than min required */
|
|
if (ret) {
|
|
DBG_PRINT(ERR_DBG, "Enabling MSI-X failed\n");
|
|
kfree(nic->entries);
|
|
swstats->mem_freed += nic->num_entries *
|
|
sizeof(struct msix_entry);
|
|
kfree(nic->s2io_entries);
|
|
swstats->mem_freed += nic->num_entries *
|
|
sizeof(struct s2io_msix_entry);
|
|
nic->entries = NULL;
|
|
nic->s2io_entries = NULL;
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* To enable MSI-X, MSI also needs to be enabled, due to a bug
|
|
* in the herc NIC. (Temp change, needs to be removed later)
|
|
*/
|
|
pci_read_config_word(nic->pdev, 0x42, &msi_control);
|
|
msi_control |= 0x1; /* Enable MSI */
|
|
pci_write_config_word(nic->pdev, 0x42, msi_control);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Handle software interrupt used during MSI(X) test */
|
|
static irqreturn_t s2io_test_intr(int irq, void *dev_id)
|
|
{
|
|
struct s2io_nic *sp = dev_id;
|
|
|
|
sp->msi_detected = 1;
|
|
wake_up(&sp->msi_wait);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Test interrupt path by forcing a a software IRQ */
|
|
static int s2io_test_msi(struct s2io_nic *sp)
|
|
{
|
|
struct pci_dev *pdev = sp->pdev;
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
int err;
|
|
u64 val64, saved64;
|
|
|
|
err = request_irq(sp->entries[1].vector, s2io_test_intr, 0,
|
|
sp->name, sp);
|
|
if (err) {
|
|
DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n",
|
|
sp->dev->name, pci_name(pdev), pdev->irq);
|
|
return err;
|
|
}
|
|
|
|
init_waitqueue_head(&sp->msi_wait);
|
|
sp->msi_detected = 0;
|
|
|
|
saved64 = val64 = readq(&bar0->scheduled_int_ctrl);
|
|
val64 |= SCHED_INT_CTRL_ONE_SHOT;
|
|
val64 |= SCHED_INT_CTRL_TIMER_EN;
|
|
val64 |= SCHED_INT_CTRL_INT2MSI(1);
|
|
writeq(val64, &bar0->scheduled_int_ctrl);
|
|
|
|
wait_event_timeout(sp->msi_wait, sp->msi_detected, HZ/10);
|
|
|
|
if (!sp->msi_detected) {
|
|
/* MSI(X) test failed, go back to INTx mode */
|
|
DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated "
|
|
"using MSI(X) during test\n",
|
|
sp->dev->name, pci_name(pdev));
|
|
|
|
err = -EOPNOTSUPP;
|
|
}
|
|
|
|
free_irq(sp->entries[1].vector, sp);
|
|
|
|
writeq(saved64, &bar0->scheduled_int_ctrl);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void remove_msix_isr(struct s2io_nic *sp)
|
|
{
|
|
int i;
|
|
u16 msi_control;
|
|
|
|
for (i = 0; i < sp->num_entries; i++) {
|
|
if (sp->s2io_entries[i].in_use == MSIX_REGISTERED_SUCCESS) {
|
|
int vector = sp->entries[i].vector;
|
|
void *arg = sp->s2io_entries[i].arg;
|
|
free_irq(vector, arg);
|
|
}
|
|
}
|
|
|
|
kfree(sp->entries);
|
|
kfree(sp->s2io_entries);
|
|
sp->entries = NULL;
|
|
sp->s2io_entries = NULL;
|
|
|
|
pci_read_config_word(sp->pdev, 0x42, &msi_control);
|
|
msi_control &= 0xFFFE; /* Disable MSI */
|
|
pci_write_config_word(sp->pdev, 0x42, msi_control);
|
|
|
|
pci_disable_msix(sp->pdev);
|
|
}
|
|
|
|
static void remove_inta_isr(struct s2io_nic *sp)
|
|
{
|
|
struct net_device *dev = sp->dev;
|
|
|
|
free_irq(sp->pdev->irq, dev);
|
|
}
|
|
|
|
/* ********************************************************* *
|
|
* Functions defined below concern the OS part of the driver *
|
|
* ********************************************************* */
|
|
|
|
/**
|
|
* s2io_open - open entry point of the driver
|
|
* @dev : pointer to the device structure.
|
|
* Description:
|
|
* This function is the open entry point of the driver. It mainly calls a
|
|
* function to allocate Rx buffers and inserts them into the buffer
|
|
* descriptors and then enables the Rx part of the NIC.
|
|
* Return value:
|
|
* 0 on success and an appropriate (-)ve integer as defined in errno.h
|
|
* file on failure.
|
|
*/
|
|
|
|
static int s2io_open(struct net_device *dev)
|
|
{
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
|
|
int err = 0;
|
|
|
|
/*
|
|
* Make sure you have link off by default every time
|
|
* Nic is initialized
|
|
*/
|
|
netif_carrier_off(dev);
|
|
sp->last_link_state = 0;
|
|
|
|
/* Initialize H/W and enable interrupts */
|
|
err = s2io_card_up(sp);
|
|
if (err) {
|
|
DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
|
|
dev->name);
|
|
goto hw_init_failed;
|
|
}
|
|
|
|
if (do_s2io_prog_unicast(dev, dev->dev_addr) == FAILURE) {
|
|
DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
|
|
s2io_card_down(sp);
|
|
err = -ENODEV;
|
|
goto hw_init_failed;
|
|
}
|
|
s2io_start_all_tx_queue(sp);
|
|
return 0;
|
|
|
|
hw_init_failed:
|
|
if (sp->config.intr_type == MSI_X) {
|
|
if (sp->entries) {
|
|
kfree(sp->entries);
|
|
swstats->mem_freed += sp->num_entries *
|
|
sizeof(struct msix_entry);
|
|
}
|
|
if (sp->s2io_entries) {
|
|
kfree(sp->s2io_entries);
|
|
swstats->mem_freed += sp->num_entries *
|
|
sizeof(struct s2io_msix_entry);
|
|
}
|
|
}
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* s2io_close -close entry point of the driver
|
|
* @dev : device pointer.
|
|
* Description:
|
|
* This is the stop entry point of the driver. It needs to undo exactly
|
|
* whatever was done by the open entry point,thus it's usually referred to
|
|
* as the close function.Among other things this function mainly stops the
|
|
* Rx side of the NIC and frees all the Rx buffers in the Rx rings.
|
|
* Return value:
|
|
* 0 on success and an appropriate (-)ve integer as defined in errno.h
|
|
* file on failure.
|
|
*/
|
|
|
|
static int s2io_close(struct net_device *dev)
|
|
{
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
struct config_param *config = &sp->config;
|
|
u64 tmp64;
|
|
int offset;
|
|
|
|
/* Return if the device is already closed *
|
|
* Can happen when s2io_card_up failed in change_mtu *
|
|
*/
|
|
if (!is_s2io_card_up(sp))
|
|
return 0;
|
|
|
|
s2io_stop_all_tx_queue(sp);
|
|
/* delete all populated mac entries */
|
|
for (offset = 1; offset < config->max_mc_addr; offset++) {
|
|
tmp64 = do_s2io_read_unicast_mc(sp, offset);
|
|
if (tmp64 != S2IO_DISABLE_MAC_ENTRY)
|
|
do_s2io_delete_unicast_mc(sp, tmp64);
|
|
}
|
|
|
|
s2io_card_down(sp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* s2io_xmit - Tx entry point of te driver
|
|
* @skb : the socket buffer containing the Tx data.
|
|
* @dev : device pointer.
|
|
* Description :
|
|
* This function is the Tx entry point of the driver. S2IO NIC supports
|
|
* certain protocol assist features on Tx side, namely CSO, S/G, LSO.
|
|
* NOTE: when device cant queue the pkt,just the trans_start variable will
|
|
* not be upadted.
|
|
* Return value:
|
|
* 0 on success & 1 on failure.
|
|
*/
|
|
|
|
static netdev_tx_t s2io_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off;
|
|
register u64 val64;
|
|
struct TxD *txdp;
|
|
struct TxFIFO_element __iomem *tx_fifo;
|
|
unsigned long flags = 0;
|
|
u16 vlan_tag = 0;
|
|
struct fifo_info *fifo = NULL;
|
|
int do_spin_lock = 1;
|
|
int offload_type;
|
|
int enable_per_list_interrupt = 0;
|
|
struct config_param *config = &sp->config;
|
|
struct mac_info *mac_control = &sp->mac_control;
|
|
struct stat_block *stats = mac_control->stats_info;
|
|
struct swStat *swstats = &stats->sw_stat;
|
|
|
|
DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
|
|
|
|
if (unlikely(skb->len <= 0)) {
|
|
DBG_PRINT(TX_DBG, "%s: Buffer has no data..\n", dev->name);
|
|
dev_kfree_skb_any(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
if (!is_s2io_card_up(sp)) {
|
|
DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
|
|
dev->name);
|
|
dev_kfree_skb(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
queue = 0;
|
|
if (sp->vlgrp && vlan_tx_tag_present(skb))
|
|
vlan_tag = vlan_tx_tag_get(skb);
|
|
if (sp->config.tx_steering_type == TX_DEFAULT_STEERING) {
|
|
if (skb->protocol == htons(ETH_P_IP)) {
|
|
struct iphdr *ip;
|
|
struct tcphdr *th;
|
|
ip = ip_hdr(skb);
|
|
|
|
if ((ip->frag_off & htons(IP_OFFSET|IP_MF)) == 0) {
|
|
th = (struct tcphdr *)(((unsigned char *)ip) +
|
|
ip->ihl*4);
|
|
|
|
if (ip->protocol == IPPROTO_TCP) {
|
|
queue_len = sp->total_tcp_fifos;
|
|
queue = (ntohs(th->source) +
|
|
ntohs(th->dest)) &
|
|
sp->fifo_selector[queue_len - 1];
|
|
if (queue >= queue_len)
|
|
queue = queue_len - 1;
|
|
} else if (ip->protocol == IPPROTO_UDP) {
|
|
queue_len = sp->total_udp_fifos;
|
|
queue = (ntohs(th->source) +
|
|
ntohs(th->dest)) &
|
|
sp->fifo_selector[queue_len - 1];
|
|
if (queue >= queue_len)
|
|
queue = queue_len - 1;
|
|
queue += sp->udp_fifo_idx;
|
|
if (skb->len > 1024)
|
|
enable_per_list_interrupt = 1;
|
|
do_spin_lock = 0;
|
|
}
|
|
}
|
|
}
|
|
} else if (sp->config.tx_steering_type == TX_PRIORITY_STEERING)
|
|
/* get fifo number based on skb->priority value */
|
|
queue = config->fifo_mapping
|
|
[skb->priority & (MAX_TX_FIFOS - 1)];
|
|
fifo = &mac_control->fifos[queue];
|
|
|
|
if (do_spin_lock)
|
|
spin_lock_irqsave(&fifo->tx_lock, flags);
|
|
else {
|
|
if (unlikely(!spin_trylock_irqsave(&fifo->tx_lock, flags)))
|
|
return NETDEV_TX_LOCKED;
|
|
}
|
|
|
|
if (sp->config.multiq) {
|
|
if (__netif_subqueue_stopped(dev, fifo->fifo_no)) {
|
|
spin_unlock_irqrestore(&fifo->tx_lock, flags);
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
} else if (unlikely(fifo->queue_state == FIFO_QUEUE_STOP)) {
|
|
if (netif_queue_stopped(dev)) {
|
|
spin_unlock_irqrestore(&fifo->tx_lock, flags);
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
}
|
|
|
|
put_off = (u16)fifo->tx_curr_put_info.offset;
|
|
get_off = (u16)fifo->tx_curr_get_info.offset;
|
|
txdp = (struct TxD *)fifo->list_info[put_off].list_virt_addr;
|
|
|
|
queue_len = fifo->tx_curr_put_info.fifo_len + 1;
|
|
/* Avoid "put" pointer going beyond "get" pointer */
|
|
if (txdp->Host_Control ||
|
|
((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
|
|
DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n");
|
|
s2io_stop_tx_queue(sp, fifo->fifo_no);
|
|
dev_kfree_skb(skb);
|
|
spin_unlock_irqrestore(&fifo->tx_lock, flags);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
offload_type = s2io_offload_type(skb);
|
|
if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
|
|
txdp->Control_1 |= TXD_TCP_LSO_EN;
|
|
txdp->Control_1 |= TXD_TCP_LSO_MSS(s2io_tcp_mss(skb));
|
|
}
|
|
if (skb->ip_summed == CHECKSUM_PARTIAL) {
|
|
txdp->Control_2 |= (TXD_TX_CKO_IPV4_EN |
|
|
TXD_TX_CKO_TCP_EN |
|
|
TXD_TX_CKO_UDP_EN);
|
|
}
|
|
txdp->Control_1 |= TXD_GATHER_CODE_FIRST;
|
|
txdp->Control_1 |= TXD_LIST_OWN_XENA;
|
|
txdp->Control_2 |= TXD_INT_NUMBER(fifo->fifo_no);
|
|
if (enable_per_list_interrupt)
|
|
if (put_off & (queue_len >> 5))
|
|
txdp->Control_2 |= TXD_INT_TYPE_PER_LIST;
|
|
if (vlan_tag) {
|
|
txdp->Control_2 |= TXD_VLAN_ENABLE;
|
|
txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag);
|
|
}
|
|
|
|
frg_len = skb->len - skb->data_len;
|
|
if (offload_type == SKB_GSO_UDP) {
|
|
int ufo_size;
|
|
|
|
ufo_size = s2io_udp_mss(skb);
|
|
ufo_size &= ~7;
|
|
txdp->Control_1 |= TXD_UFO_EN;
|
|
txdp->Control_1 |= TXD_UFO_MSS(ufo_size);
|
|
txdp->Control_1 |= TXD_BUFFER0_SIZE(8);
|
|
#ifdef __BIG_ENDIAN
|
|
/* both variants do cpu_to_be64(be32_to_cpu(...)) */
|
|
fifo->ufo_in_band_v[put_off] =
|
|
(__force u64)skb_shinfo(skb)->ip6_frag_id;
|
|
#else
|
|
fifo->ufo_in_band_v[put_off] =
|
|
(__force u64)skb_shinfo(skb)->ip6_frag_id << 32;
|
|
#endif
|
|
txdp->Host_Control = (unsigned long)fifo->ufo_in_band_v;
|
|
txdp->Buffer_Pointer = pci_map_single(sp->pdev,
|
|
fifo->ufo_in_band_v,
|
|
sizeof(u64),
|
|
PCI_DMA_TODEVICE);
|
|
if (pci_dma_mapping_error(sp->pdev, txdp->Buffer_Pointer))
|
|
goto pci_map_failed;
|
|
txdp++;
|
|
}
|
|
|
|
txdp->Buffer_Pointer = pci_map_single(sp->pdev, skb->data,
|
|
frg_len, PCI_DMA_TODEVICE);
|
|
if (pci_dma_mapping_error(sp->pdev, txdp->Buffer_Pointer))
|
|
goto pci_map_failed;
|
|
|
|
txdp->Host_Control = (unsigned long)skb;
|
|
txdp->Control_1 |= TXD_BUFFER0_SIZE(frg_len);
|
|
if (offload_type == SKB_GSO_UDP)
|
|
txdp->Control_1 |= TXD_UFO_EN;
|
|
|
|
frg_cnt = skb_shinfo(skb)->nr_frags;
|
|
/* For fragmented SKB. */
|
|
for (i = 0; i < frg_cnt; i++) {
|
|
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
|
|
/* A '0' length fragment will be ignored */
|
|
if (!frag->size)
|
|
continue;
|
|
txdp++;
|
|
txdp->Buffer_Pointer = (u64)pci_map_page(sp->pdev, frag->page,
|
|
frag->page_offset,
|
|
frag->size,
|
|
PCI_DMA_TODEVICE);
|
|
txdp->Control_1 = TXD_BUFFER0_SIZE(frag->size);
|
|
if (offload_type == SKB_GSO_UDP)
|
|
txdp->Control_1 |= TXD_UFO_EN;
|
|
}
|
|
txdp->Control_1 |= TXD_GATHER_CODE_LAST;
|
|
|
|
if (offload_type == SKB_GSO_UDP)
|
|
frg_cnt++; /* as Txd0 was used for inband header */
|
|
|
|
tx_fifo = mac_control->tx_FIFO_start[queue];
|
|
val64 = fifo->list_info[put_off].list_phy_addr;
|
|
writeq(val64, &tx_fifo->TxDL_Pointer);
|
|
|
|
val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST |
|
|
TX_FIFO_LAST_LIST);
|
|
if (offload_type)
|
|
val64 |= TX_FIFO_SPECIAL_FUNC;
|
|
|
|
writeq(val64, &tx_fifo->List_Control);
|
|
|
|
mmiowb();
|
|
|
|
put_off++;
|
|
if (put_off == fifo->tx_curr_put_info.fifo_len + 1)
|
|
put_off = 0;
|
|
fifo->tx_curr_put_info.offset = put_off;
|
|
|
|
/* Avoid "put" pointer going beyond "get" pointer */
|
|
if (((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
|
|
swstats->fifo_full_cnt++;
|
|
DBG_PRINT(TX_DBG,
|
|
"No free TxDs for xmit, Put: 0x%x Get:0x%x\n",
|
|
put_off, get_off);
|
|
s2io_stop_tx_queue(sp, fifo->fifo_no);
|
|
}
|
|
swstats->mem_allocated += skb->truesize;
|
|
spin_unlock_irqrestore(&fifo->tx_lock, flags);
|
|
|
|
if (sp->config.intr_type == MSI_X)
|
|
tx_intr_handler(fifo);
|
|
|
|
return NETDEV_TX_OK;
|
|
|
|
pci_map_failed:
|
|
swstats->pci_map_fail_cnt++;
|
|
s2io_stop_tx_queue(sp, fifo->fifo_no);
|
|
swstats->mem_freed += skb->truesize;
|
|
dev_kfree_skb(skb);
|
|
spin_unlock_irqrestore(&fifo->tx_lock, flags);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static void
|
|
s2io_alarm_handle(unsigned long data)
|
|
{
|
|
struct s2io_nic *sp = (struct s2io_nic *)data;
|
|
struct net_device *dev = sp->dev;
|
|
|
|
s2io_handle_errors(dev);
|
|
mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
|
|
}
|
|
|
|
static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id)
|
|
{
|
|
struct ring_info *ring = (struct ring_info *)dev_id;
|
|
struct s2io_nic *sp = ring->nic;
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
|
|
if (unlikely(!is_s2io_card_up(sp)))
|
|
return IRQ_HANDLED;
|
|
|
|
if (sp->config.napi) {
|
|
u8 __iomem *addr = NULL;
|
|
u8 val8 = 0;
|
|
|
|
addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
|
|
addr += (7 - ring->ring_no);
|
|
val8 = (ring->ring_no == 0) ? 0x7f : 0xff;
|
|
writeb(val8, addr);
|
|
val8 = readb(addr);
|
|
napi_schedule(&ring->napi);
|
|
} else {
|
|
rx_intr_handler(ring, 0);
|
|
s2io_chk_rx_buffers(sp, ring);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t s2io_msix_fifo_handle(int irq, void *dev_id)
|
|
{
|
|
int i;
|
|
struct fifo_info *fifos = (struct fifo_info *)dev_id;
|
|
struct s2io_nic *sp = fifos->nic;
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
struct config_param *config = &sp->config;
|
|
u64 reason;
|
|
|
|
if (unlikely(!is_s2io_card_up(sp)))
|
|
return IRQ_NONE;
|
|
|
|
reason = readq(&bar0->general_int_status);
|
|
if (unlikely(reason == S2IO_MINUS_ONE))
|
|
/* Nothing much can be done. Get out */
|
|
return IRQ_HANDLED;
|
|
|
|
if (reason & (GEN_INTR_TXPIC | GEN_INTR_TXTRAFFIC)) {
|
|
writeq(S2IO_MINUS_ONE, &bar0->general_int_mask);
|
|
|
|
if (reason & GEN_INTR_TXPIC)
|
|
s2io_txpic_intr_handle(sp);
|
|
|
|
if (reason & GEN_INTR_TXTRAFFIC)
|
|
writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int);
|
|
|
|
for (i = 0; i < config->tx_fifo_num; i++)
|
|
tx_intr_handler(&fifos[i]);
|
|
|
|
writeq(sp->general_int_mask, &bar0->general_int_mask);
|
|
readl(&bar0->general_int_status);
|
|
return IRQ_HANDLED;
|
|
}
|
|
/* The interrupt was not raised by us */
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static void s2io_txpic_intr_handle(struct s2io_nic *sp)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
u64 val64;
|
|
|
|
val64 = readq(&bar0->pic_int_status);
|
|
if (val64 & PIC_INT_GPIO) {
|
|
val64 = readq(&bar0->gpio_int_reg);
|
|
if ((val64 & GPIO_INT_REG_LINK_DOWN) &&
|
|
(val64 & GPIO_INT_REG_LINK_UP)) {
|
|
/*
|
|
* This is unstable state so clear both up/down
|
|
* interrupt and adapter to re-evaluate the link state.
|
|
*/
|
|
val64 |= GPIO_INT_REG_LINK_DOWN;
|
|
val64 |= GPIO_INT_REG_LINK_UP;
|
|
writeq(val64, &bar0->gpio_int_reg);
|
|
val64 = readq(&bar0->gpio_int_mask);
|
|
val64 &= ~(GPIO_INT_MASK_LINK_UP |
|
|
GPIO_INT_MASK_LINK_DOWN);
|
|
writeq(val64, &bar0->gpio_int_mask);
|
|
} else if (val64 & GPIO_INT_REG_LINK_UP) {
|
|
val64 = readq(&bar0->adapter_status);
|
|
/* Enable Adapter */
|
|
val64 = readq(&bar0->adapter_control);
|
|
val64 |= ADAPTER_CNTL_EN;
|
|
writeq(val64, &bar0->adapter_control);
|
|
val64 |= ADAPTER_LED_ON;
|
|
writeq(val64, &bar0->adapter_control);
|
|
if (!sp->device_enabled_once)
|
|
sp->device_enabled_once = 1;
|
|
|
|
s2io_link(sp, LINK_UP);
|
|
/*
|
|
* unmask link down interrupt and mask link-up
|
|
* intr
|
|
*/
|
|
val64 = readq(&bar0->gpio_int_mask);
|
|
val64 &= ~GPIO_INT_MASK_LINK_DOWN;
|
|
val64 |= GPIO_INT_MASK_LINK_UP;
|
|
writeq(val64, &bar0->gpio_int_mask);
|
|
|
|
} else if (val64 & GPIO_INT_REG_LINK_DOWN) {
|
|
val64 = readq(&bar0->adapter_status);
|
|
s2io_link(sp, LINK_DOWN);
|
|
/* Link is down so unmaks link up interrupt */
|
|
val64 = readq(&bar0->gpio_int_mask);
|
|
val64 &= ~GPIO_INT_MASK_LINK_UP;
|
|
val64 |= GPIO_INT_MASK_LINK_DOWN;
|
|
writeq(val64, &bar0->gpio_int_mask);
|
|
|
|
/* turn off LED */
|
|
val64 = readq(&bar0->adapter_control);
|
|
val64 = val64 & (~ADAPTER_LED_ON);
|
|
writeq(val64, &bar0->adapter_control);
|
|
}
|
|
}
|
|
val64 = readq(&bar0->gpio_int_mask);
|
|
}
|
|
|
|
/**
|
|
* do_s2io_chk_alarm_bit - Check for alarm and incrment the counter
|
|
* @value: alarm bits
|
|
* @addr: address value
|
|
* @cnt: counter variable
|
|
* Description: Check for alarm and increment the counter
|
|
* Return Value:
|
|
* 1 - if alarm bit set
|
|
* 0 - if alarm bit is not set
|
|
*/
|
|
static int do_s2io_chk_alarm_bit(u64 value, void __iomem *addr,
|
|
unsigned long long *cnt)
|
|
{
|
|
u64 val64;
|
|
val64 = readq(addr);
|
|
if (val64 & value) {
|
|
writeq(val64, addr);
|
|
(*cnt)++;
|
|
return 1;
|
|
}
|
|
return 0;
|
|
|
|
}
|
|
|
|
/**
|
|
* s2io_handle_errors - Xframe error indication handler
|
|
* @nic: device private variable
|
|
* Description: Handle alarms such as loss of link, single or
|
|
* double ECC errors, critical and serious errors.
|
|
* Return Value:
|
|
* NONE
|
|
*/
|
|
static void s2io_handle_errors(void *dev_id)
|
|
{
|
|
struct net_device *dev = (struct net_device *)dev_id;
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
u64 temp64 = 0, val64 = 0;
|
|
int i = 0;
|
|
|
|
struct swStat *sw_stat = &sp->mac_control.stats_info->sw_stat;
|
|
struct xpakStat *stats = &sp->mac_control.stats_info->xpak_stat;
|
|
|
|
if (!is_s2io_card_up(sp))
|
|
return;
|
|
|
|
if (pci_channel_offline(sp->pdev))
|
|
return;
|
|
|
|
memset(&sw_stat->ring_full_cnt, 0,
|
|
sizeof(sw_stat->ring_full_cnt));
|
|
|
|
/* Handling the XPAK counters update */
|
|
if (stats->xpak_timer_count < 72000) {
|
|
/* waiting for an hour */
|
|
stats->xpak_timer_count++;
|
|
} else {
|
|
s2io_updt_xpak_counter(dev);
|
|
/* reset the count to zero */
|
|
stats->xpak_timer_count = 0;
|
|
}
|
|
|
|
/* Handling link status change error Intr */
|
|
if (s2io_link_fault_indication(sp) == MAC_RMAC_ERR_TIMER) {
|
|
val64 = readq(&bar0->mac_rmac_err_reg);
|
|
writeq(val64, &bar0->mac_rmac_err_reg);
|
|
if (val64 & RMAC_LINK_STATE_CHANGE_INT)
|
|
schedule_work(&sp->set_link_task);
|
|
}
|
|
|
|
/* In case of a serious error, the device will be Reset. */
|
|
if (do_s2io_chk_alarm_bit(SERR_SOURCE_ANY, &bar0->serr_source,
|
|
&sw_stat->serious_err_cnt))
|
|
goto reset;
|
|
|
|
/* Check for data parity error */
|
|
if (do_s2io_chk_alarm_bit(GPIO_INT_REG_DP_ERR_INT, &bar0->gpio_int_reg,
|
|
&sw_stat->parity_err_cnt))
|
|
goto reset;
|
|
|
|
/* Check for ring full counter */
|
|
if (sp->device_type == XFRAME_II_DEVICE) {
|
|
val64 = readq(&bar0->ring_bump_counter1);
|
|
for (i = 0; i < 4; i++) {
|
|
temp64 = (val64 & vBIT(0xFFFF, (i*16), 16));
|
|
temp64 >>= 64 - ((i+1)*16);
|
|
sw_stat->ring_full_cnt[i] += temp64;
|
|
}
|
|
|
|
val64 = readq(&bar0->ring_bump_counter2);
|
|
for (i = 0; i < 4; i++) {
|
|
temp64 = (val64 & vBIT(0xFFFF, (i*16), 16));
|
|
temp64 >>= 64 - ((i+1)*16);
|
|
sw_stat->ring_full_cnt[i+4] += temp64;
|
|
}
|
|
}
|
|
|
|
val64 = readq(&bar0->txdma_int_status);
|
|
/*check for pfc_err*/
|
|
if (val64 & TXDMA_PFC_INT) {
|
|
if (do_s2io_chk_alarm_bit(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM |
|
|
PFC_MISC_0_ERR | PFC_MISC_1_ERR |
|
|
PFC_PCIX_ERR,
|
|
&bar0->pfc_err_reg,
|
|
&sw_stat->pfc_err_cnt))
|
|
goto reset;
|
|
do_s2io_chk_alarm_bit(PFC_ECC_SG_ERR,
|
|
&bar0->pfc_err_reg,
|
|
&sw_stat->pfc_err_cnt);
|
|
}
|
|
|
|
/*check for tda_err*/
|
|
if (val64 & TXDMA_TDA_INT) {
|
|
if (do_s2io_chk_alarm_bit(TDA_Fn_ECC_DB_ERR |
|
|
TDA_SM0_ERR_ALARM |
|
|
TDA_SM1_ERR_ALARM,
|
|
&bar0->tda_err_reg,
|
|
&sw_stat->tda_err_cnt))
|
|
goto reset;
|
|
do_s2io_chk_alarm_bit(TDA_Fn_ECC_SG_ERR | TDA_PCIX_ERR,
|
|
&bar0->tda_err_reg,
|
|
&sw_stat->tda_err_cnt);
|
|
}
|
|
/*check for pcc_err*/
|
|
if (val64 & TXDMA_PCC_INT) {
|
|
if (do_s2io_chk_alarm_bit(PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM |
|
|
PCC_N_SERR | PCC_6_COF_OV_ERR |
|
|
PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR |
|
|
PCC_7_LSO_OV_ERR | PCC_FB_ECC_DB_ERR |
|
|
PCC_TXB_ECC_DB_ERR,
|
|
&bar0->pcc_err_reg,
|
|
&sw_stat->pcc_err_cnt))
|
|
goto reset;
|
|
do_s2io_chk_alarm_bit(PCC_FB_ECC_SG_ERR | PCC_TXB_ECC_SG_ERR,
|
|
&bar0->pcc_err_reg,
|
|
&sw_stat->pcc_err_cnt);
|
|
}
|
|
|
|
/*check for tti_err*/
|
|
if (val64 & TXDMA_TTI_INT) {
|
|
if (do_s2io_chk_alarm_bit(TTI_SM_ERR_ALARM,
|
|
&bar0->tti_err_reg,
|
|
&sw_stat->tti_err_cnt))
|
|
goto reset;
|
|
do_s2io_chk_alarm_bit(TTI_ECC_SG_ERR | TTI_ECC_DB_ERR,
|
|
&bar0->tti_err_reg,
|
|
&sw_stat->tti_err_cnt);
|
|
}
|
|
|
|
/*check for lso_err*/
|
|
if (val64 & TXDMA_LSO_INT) {
|
|
if (do_s2io_chk_alarm_bit(LSO6_ABORT | LSO7_ABORT |
|
|
LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM,
|
|
&bar0->lso_err_reg,
|
|
&sw_stat->lso_err_cnt))
|
|
goto reset;
|
|
do_s2io_chk_alarm_bit(LSO6_SEND_OFLOW | LSO7_SEND_OFLOW,
|
|
&bar0->lso_err_reg,
|
|
&sw_stat->lso_err_cnt);
|
|
}
|
|
|
|
/*check for tpa_err*/
|
|
if (val64 & TXDMA_TPA_INT) {
|
|
if (do_s2io_chk_alarm_bit(TPA_SM_ERR_ALARM,
|
|
&bar0->tpa_err_reg,
|
|
&sw_stat->tpa_err_cnt))
|
|
goto reset;
|
|
do_s2io_chk_alarm_bit(TPA_TX_FRM_DROP,
|
|
&bar0->tpa_err_reg,
|
|
&sw_stat->tpa_err_cnt);
|
|
}
|
|
|
|
/*check for sm_err*/
|
|
if (val64 & TXDMA_SM_INT) {
|
|
if (do_s2io_chk_alarm_bit(SM_SM_ERR_ALARM,
|
|
&bar0->sm_err_reg,
|
|
&sw_stat->sm_err_cnt))
|
|
goto reset;
|
|
}
|
|
|
|
val64 = readq(&bar0->mac_int_status);
|
|
if (val64 & MAC_INT_STATUS_TMAC_INT) {
|
|
if (do_s2io_chk_alarm_bit(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR,
|
|
&bar0->mac_tmac_err_reg,
|
|
&sw_stat->mac_tmac_err_cnt))
|
|
goto reset;
|
|
do_s2io_chk_alarm_bit(TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR |
|
|
TMAC_DESC_ECC_SG_ERR |
|
|
TMAC_DESC_ECC_DB_ERR,
|
|
&bar0->mac_tmac_err_reg,
|
|
&sw_stat->mac_tmac_err_cnt);
|
|
}
|
|
|
|
val64 = readq(&bar0->xgxs_int_status);
|
|
if (val64 & XGXS_INT_STATUS_TXGXS) {
|
|
if (do_s2io_chk_alarm_bit(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR,
|
|
&bar0->xgxs_txgxs_err_reg,
|
|
&sw_stat->xgxs_txgxs_err_cnt))
|
|
goto reset;
|
|
do_s2io_chk_alarm_bit(TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR,
|
|
&bar0->xgxs_txgxs_err_reg,
|
|
&sw_stat->xgxs_txgxs_err_cnt);
|
|
}
|
|
|
|
val64 = readq(&bar0->rxdma_int_status);
|
|
if (val64 & RXDMA_INT_RC_INT_M) {
|
|
if (do_s2io_chk_alarm_bit(RC_PRCn_ECC_DB_ERR |
|
|
RC_FTC_ECC_DB_ERR |
|
|
RC_PRCn_SM_ERR_ALARM |
|
|
RC_FTC_SM_ERR_ALARM,
|
|
&bar0->rc_err_reg,
|
|
&sw_stat->rc_err_cnt))
|
|
goto reset;
|
|
do_s2io_chk_alarm_bit(RC_PRCn_ECC_SG_ERR |
|
|
RC_FTC_ECC_SG_ERR |
|
|
RC_RDA_FAIL_WR_Rn, &bar0->rc_err_reg,
|
|
&sw_stat->rc_err_cnt);
|
|
if (do_s2io_chk_alarm_bit(PRC_PCI_AB_RD_Rn |
|
|
PRC_PCI_AB_WR_Rn |
|
|
PRC_PCI_AB_F_WR_Rn,
|
|
&bar0->prc_pcix_err_reg,
|
|
&sw_stat->prc_pcix_err_cnt))
|
|
goto reset;
|
|
do_s2io_chk_alarm_bit(PRC_PCI_DP_RD_Rn |
|
|
PRC_PCI_DP_WR_Rn |
|
|
PRC_PCI_DP_F_WR_Rn,
|
|
&bar0->prc_pcix_err_reg,
|
|
&sw_stat->prc_pcix_err_cnt);
|
|
}
|
|
|
|
if (val64 & RXDMA_INT_RPA_INT_M) {
|
|
if (do_s2io_chk_alarm_bit(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR,
|
|
&bar0->rpa_err_reg,
|
|
&sw_stat->rpa_err_cnt))
|
|
goto reset;
|
|
do_s2io_chk_alarm_bit(RPA_ECC_SG_ERR | RPA_ECC_DB_ERR,
|
|
&bar0->rpa_err_reg,
|
|
&sw_stat->rpa_err_cnt);
|
|
}
|
|
|
|
if (val64 & RXDMA_INT_RDA_INT_M) {
|
|
if (do_s2io_chk_alarm_bit(RDA_RXDn_ECC_DB_ERR |
|
|
RDA_FRM_ECC_DB_N_AERR |
|
|
RDA_SM1_ERR_ALARM |
|
|
RDA_SM0_ERR_ALARM |
|
|
RDA_RXD_ECC_DB_SERR,
|
|
&bar0->rda_err_reg,
|
|
&sw_stat->rda_err_cnt))
|
|
goto reset;
|
|
do_s2io_chk_alarm_bit(RDA_RXDn_ECC_SG_ERR |
|
|
RDA_FRM_ECC_SG_ERR |
|
|
RDA_MISC_ERR |
|
|
RDA_PCIX_ERR,
|
|
&bar0->rda_err_reg,
|
|
&sw_stat->rda_err_cnt);
|
|
}
|
|
|
|
if (val64 & RXDMA_INT_RTI_INT_M) {
|
|
if (do_s2io_chk_alarm_bit(RTI_SM_ERR_ALARM,
|
|
&bar0->rti_err_reg,
|
|
&sw_stat->rti_err_cnt))
|
|
goto reset;
|
|
do_s2io_chk_alarm_bit(RTI_ECC_SG_ERR | RTI_ECC_DB_ERR,
|
|
&bar0->rti_err_reg,
|
|
&sw_stat->rti_err_cnt);
|
|
}
|
|
|
|
val64 = readq(&bar0->mac_int_status);
|
|
if (val64 & MAC_INT_STATUS_RMAC_INT) {
|
|
if (do_s2io_chk_alarm_bit(RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR,
|
|
&bar0->mac_rmac_err_reg,
|
|
&sw_stat->mac_rmac_err_cnt))
|
|
goto reset;
|
|
do_s2io_chk_alarm_bit(RMAC_UNUSED_INT |
|
|
RMAC_SINGLE_ECC_ERR |
|
|
RMAC_DOUBLE_ECC_ERR,
|
|
&bar0->mac_rmac_err_reg,
|
|
&sw_stat->mac_rmac_err_cnt);
|
|
}
|
|
|
|
val64 = readq(&bar0->xgxs_int_status);
|
|
if (val64 & XGXS_INT_STATUS_RXGXS) {
|
|
if (do_s2io_chk_alarm_bit(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR,
|
|
&bar0->xgxs_rxgxs_err_reg,
|
|
&sw_stat->xgxs_rxgxs_err_cnt))
|
|
goto reset;
|
|
}
|
|
|
|
val64 = readq(&bar0->mc_int_status);
|
|
if (val64 & MC_INT_STATUS_MC_INT) {
|
|
if (do_s2io_chk_alarm_bit(MC_ERR_REG_SM_ERR,
|
|
&bar0->mc_err_reg,
|
|
&sw_stat->mc_err_cnt))
|
|
goto reset;
|
|
|
|
/* Handling Ecc errors */
|
|
if (val64 & (MC_ERR_REG_ECC_ALL_SNG | MC_ERR_REG_ECC_ALL_DBL)) {
|
|
writeq(val64, &bar0->mc_err_reg);
|
|
if (val64 & MC_ERR_REG_ECC_ALL_DBL) {
|
|
sw_stat->double_ecc_errs++;
|
|
if (sp->device_type != XFRAME_II_DEVICE) {
|
|
/*
|
|
* Reset XframeI only if critical error
|
|
*/
|
|
if (val64 &
|
|
(MC_ERR_REG_MIRI_ECC_DB_ERR_0 |
|
|
MC_ERR_REG_MIRI_ECC_DB_ERR_1))
|
|
goto reset;
|
|
}
|
|
} else
|
|
sw_stat->single_ecc_errs++;
|
|
}
|
|
}
|
|
return;
|
|
|
|
reset:
|
|
s2io_stop_all_tx_queue(sp);
|
|
schedule_work(&sp->rst_timer_task);
|
|
sw_stat->soft_reset_cnt++;
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* s2io_isr - ISR handler of the device .
|
|
* @irq: the irq of the device.
|
|
* @dev_id: a void pointer to the dev structure of the NIC.
|
|
* Description: This function is the ISR handler of the device. It
|
|
* identifies the reason for the interrupt and calls the relevant
|
|
* service routines. As a contongency measure, this ISR allocates the
|
|
* recv buffers, if their numbers are below the panic value which is
|
|
* presently set to 25% of the original number of rcv buffers allocated.
|
|
* Return value:
|
|
* IRQ_HANDLED: will be returned if IRQ was handled by this routine
|
|
* IRQ_NONE: will be returned if interrupt is not from our device
|
|
*/
|
|
static irqreturn_t s2io_isr(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = (struct net_device *)dev_id;
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
int i;
|
|
u64 reason = 0;
|
|
struct mac_info *mac_control;
|
|
struct config_param *config;
|
|
|
|
/* Pretend we handled any irq's from a disconnected card */
|
|
if (pci_channel_offline(sp->pdev))
|
|
return IRQ_NONE;
|
|
|
|
if (!is_s2io_card_up(sp))
|
|
return IRQ_NONE;
|
|
|
|
config = &sp->config;
|
|
mac_control = &sp->mac_control;
|
|
|
|
/*
|
|
* Identify the cause for interrupt and call the appropriate
|
|
* interrupt handler. Causes for the interrupt could be;
|
|
* 1. Rx of packet.
|
|
* 2. Tx complete.
|
|
* 3. Link down.
|
|
*/
|
|
reason = readq(&bar0->general_int_status);
|
|
|
|
if (unlikely(reason == S2IO_MINUS_ONE))
|
|
return IRQ_HANDLED; /* Nothing much can be done. Get out */
|
|
|
|
if (reason &
|
|
(GEN_INTR_RXTRAFFIC | GEN_INTR_TXTRAFFIC | GEN_INTR_TXPIC)) {
|
|
writeq(S2IO_MINUS_ONE, &bar0->general_int_mask);
|
|
|
|
if (config->napi) {
|
|
if (reason & GEN_INTR_RXTRAFFIC) {
|
|
napi_schedule(&sp->napi);
|
|
writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask);
|
|
writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
|
|
readl(&bar0->rx_traffic_int);
|
|
}
|
|
} else {
|
|
/*
|
|
* rx_traffic_int reg is an R1 register, writing all 1's
|
|
* will ensure that the actual interrupt causing bit
|
|
* get's cleared and hence a read can be avoided.
|
|
*/
|
|
if (reason & GEN_INTR_RXTRAFFIC)
|
|
writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
struct ring_info *ring = &mac_control->rings[i];
|
|
|
|
rx_intr_handler(ring, 0);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* tx_traffic_int reg is an R1 register, writing all 1's
|
|
* will ensure that the actual interrupt causing bit get's
|
|
* cleared and hence a read can be avoided.
|
|
*/
|
|
if (reason & GEN_INTR_TXTRAFFIC)
|
|
writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int);
|
|
|
|
for (i = 0; i < config->tx_fifo_num; i++)
|
|
tx_intr_handler(&mac_control->fifos[i]);
|
|
|
|
if (reason & GEN_INTR_TXPIC)
|
|
s2io_txpic_intr_handle(sp);
|
|
|
|
/*
|
|
* Reallocate the buffers from the interrupt handler itself.
|
|
*/
|
|
if (!config->napi) {
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
struct ring_info *ring = &mac_control->rings[i];
|
|
|
|
s2io_chk_rx_buffers(sp, ring);
|
|
}
|
|
}
|
|
writeq(sp->general_int_mask, &bar0->general_int_mask);
|
|
readl(&bar0->general_int_status);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
} else if (!reason) {
|
|
/* The interrupt was not raised by us */
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* s2io_updt_stats -
|
|
*/
|
|
static void s2io_updt_stats(struct s2io_nic *sp)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
u64 val64;
|
|
int cnt = 0;
|
|
|
|
if (is_s2io_card_up(sp)) {
|
|
/* Apprx 30us on a 133 MHz bus */
|
|
val64 = SET_UPDT_CLICKS(10) |
|
|
STAT_CFG_ONE_SHOT_EN | STAT_CFG_STAT_EN;
|
|
writeq(val64, &bar0->stat_cfg);
|
|
do {
|
|
udelay(100);
|
|
val64 = readq(&bar0->stat_cfg);
|
|
if (!(val64 & s2BIT(0)))
|
|
break;
|
|
cnt++;
|
|
if (cnt == 5)
|
|
break; /* Updt failed */
|
|
} while (1);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* s2io_get_stats - Updates the device statistics structure.
|
|
* @dev : pointer to the device structure.
|
|
* Description:
|
|
* This function updates the device statistics structure in the s2io_nic
|
|
* structure and returns a pointer to the same.
|
|
* Return value:
|
|
* pointer to the updated net_device_stats structure.
|
|
*/
|
|
|
|
static struct net_device_stats *s2io_get_stats(struct net_device *dev)
|
|
{
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
struct config_param *config = &sp->config;
|
|
struct mac_info *mac_control = &sp->mac_control;
|
|
struct stat_block *stats = mac_control->stats_info;
|
|
int i;
|
|
|
|
/* Configure Stats for immediate updt */
|
|
s2io_updt_stats(sp);
|
|
|
|
/* Using sp->stats as a staging area, because reset (due to mtu
|
|
change, for example) will clear some hardware counters */
|
|
dev->stats.tx_packets += le32_to_cpu(stats->tmac_frms) -
|
|
sp->stats.tx_packets;
|
|
sp->stats.tx_packets = le32_to_cpu(stats->tmac_frms);
|
|
|
|
dev->stats.tx_errors += le32_to_cpu(stats->tmac_any_err_frms) -
|
|
sp->stats.tx_errors;
|
|
sp->stats.tx_errors = le32_to_cpu(stats->tmac_any_err_frms);
|
|
|
|
dev->stats.rx_errors += le64_to_cpu(stats->rmac_drop_frms) -
|
|
sp->stats.rx_errors;
|
|
sp->stats.rx_errors = le64_to_cpu(stats->rmac_drop_frms);
|
|
|
|
dev->stats.multicast = le32_to_cpu(stats->rmac_vld_mcst_frms) -
|
|
sp->stats.multicast;
|
|
sp->stats.multicast = le32_to_cpu(stats->rmac_vld_mcst_frms);
|
|
|
|
dev->stats.rx_length_errors = le64_to_cpu(stats->rmac_long_frms) -
|
|
sp->stats.rx_length_errors;
|
|
sp->stats.rx_length_errors = le64_to_cpu(stats->rmac_long_frms);
|
|
|
|
/* collect per-ring rx_packets and rx_bytes */
|
|
dev->stats.rx_packets = dev->stats.rx_bytes = 0;
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
struct ring_info *ring = &mac_control->rings[i];
|
|
|
|
dev->stats.rx_packets += ring->rx_packets;
|
|
dev->stats.rx_bytes += ring->rx_bytes;
|
|
}
|
|
|
|
return &dev->stats;
|
|
}
|
|
|
|
/**
|
|
* s2io_set_multicast - entry point for multicast address enable/disable.
|
|
* @dev : pointer to the device structure
|
|
* Description:
|
|
* This function is a driver entry point which gets called by the kernel
|
|
* whenever multicast addresses must be enabled/disabled. This also gets
|
|
* called to set/reset promiscuous mode. Depending on the deivce flag, we
|
|
* determine, if multicast address must be enabled or if promiscuous mode
|
|
* is to be disabled etc.
|
|
* Return value:
|
|
* void.
|
|
*/
|
|
|
|
static void s2io_set_multicast(struct net_device *dev)
|
|
{
|
|
int i, j, prev_cnt;
|
|
struct dev_mc_list *mclist;
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
u64 val64 = 0, multi_mac = 0x010203040506ULL, mask =
|
|
0xfeffffffffffULL;
|
|
u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, mac_addr = 0;
|
|
void __iomem *add;
|
|
struct config_param *config = &sp->config;
|
|
|
|
if ((dev->flags & IFF_ALLMULTI) && (!sp->m_cast_flg)) {
|
|
/* Enable all Multicast addresses */
|
|
writeq(RMAC_ADDR_DATA0_MEM_ADDR(multi_mac),
|
|
&bar0->rmac_addr_data0_mem);
|
|
writeq(RMAC_ADDR_DATA1_MEM_MASK(mask),
|
|
&bar0->rmac_addr_data1_mem);
|
|
val64 = RMAC_ADDR_CMD_MEM_WE |
|
|
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
|
|
RMAC_ADDR_CMD_MEM_OFFSET(config->max_mc_addr - 1);
|
|
writeq(val64, &bar0->rmac_addr_cmd_mem);
|
|
/* Wait till command completes */
|
|
wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
|
|
RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
|
|
S2IO_BIT_RESET);
|
|
|
|
sp->m_cast_flg = 1;
|
|
sp->all_multi_pos = config->max_mc_addr - 1;
|
|
} else if ((dev->flags & IFF_ALLMULTI) && (sp->m_cast_flg)) {
|
|
/* Disable all Multicast addresses */
|
|
writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
|
|
&bar0->rmac_addr_data0_mem);
|
|
writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0),
|
|
&bar0->rmac_addr_data1_mem);
|
|
val64 = RMAC_ADDR_CMD_MEM_WE |
|
|
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
|
|
RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos);
|
|
writeq(val64, &bar0->rmac_addr_cmd_mem);
|
|
/* Wait till command completes */
|
|
wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
|
|
RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
|
|
S2IO_BIT_RESET);
|
|
|
|
sp->m_cast_flg = 0;
|
|
sp->all_multi_pos = 0;
|
|
}
|
|
|
|
if ((dev->flags & IFF_PROMISC) && (!sp->promisc_flg)) {
|
|
/* Put the NIC into promiscuous mode */
|
|
add = &bar0->mac_cfg;
|
|
val64 = readq(&bar0->mac_cfg);
|
|
val64 |= MAC_CFG_RMAC_PROM_ENABLE;
|
|
|
|
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
|
|
writel((u32)val64, add);
|
|
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
|
|
writel((u32) (val64 >> 32), (add + 4));
|
|
|
|
if (vlan_tag_strip != 1) {
|
|
val64 = readq(&bar0->rx_pa_cfg);
|
|
val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG;
|
|
writeq(val64, &bar0->rx_pa_cfg);
|
|
sp->vlan_strip_flag = 0;
|
|
}
|
|
|
|
val64 = readq(&bar0->mac_cfg);
|
|
sp->promisc_flg = 1;
|
|
DBG_PRINT(INFO_DBG, "%s: entered promiscuous mode\n",
|
|
dev->name);
|
|
} else if (!(dev->flags & IFF_PROMISC) && (sp->promisc_flg)) {
|
|
/* Remove the NIC from promiscuous mode */
|
|
add = &bar0->mac_cfg;
|
|
val64 = readq(&bar0->mac_cfg);
|
|
val64 &= ~MAC_CFG_RMAC_PROM_ENABLE;
|
|
|
|
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
|
|
writel((u32)val64, add);
|
|
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
|
|
writel((u32) (val64 >> 32), (add + 4));
|
|
|
|
if (vlan_tag_strip != 0) {
|
|
val64 = readq(&bar0->rx_pa_cfg);
|
|
val64 |= RX_PA_CFG_STRIP_VLAN_TAG;
|
|
writeq(val64, &bar0->rx_pa_cfg);
|
|
sp->vlan_strip_flag = 1;
|
|
}
|
|
|
|
val64 = readq(&bar0->mac_cfg);
|
|
sp->promisc_flg = 0;
|
|
DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n", dev->name);
|
|
}
|
|
|
|
/* Update individual M_CAST address list */
|
|
if ((!sp->m_cast_flg) && dev->mc_count) {
|
|
if (dev->mc_count >
|
|
(config->max_mc_addr - config->max_mac_addr)) {
|
|
DBG_PRINT(ERR_DBG,
|
|
"%s: No more Rx filters can be added - "
|
|
"please enable ALL_MULTI instead\n",
|
|
dev->name);
|
|
return;
|
|
}
|
|
|
|
prev_cnt = sp->mc_addr_count;
|
|
sp->mc_addr_count = dev->mc_count;
|
|
|
|
/* Clear out the previous list of Mc in the H/W. */
|
|
for (i = 0; i < prev_cnt; i++) {
|
|
writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
|
|
&bar0->rmac_addr_data0_mem);
|
|
writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
|
|
&bar0->rmac_addr_data1_mem);
|
|
val64 = RMAC_ADDR_CMD_MEM_WE |
|
|
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
|
|
RMAC_ADDR_CMD_MEM_OFFSET
|
|
(config->mc_start_offset + i);
|
|
writeq(val64, &bar0->rmac_addr_cmd_mem);
|
|
|
|
/* Wait for command completes */
|
|
if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
|
|
RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
|
|
S2IO_BIT_RESET)) {
|
|
DBG_PRINT(ERR_DBG,
|
|
"%s: Adding Multicasts failed\n",
|
|
dev->name);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Create the new Rx filter list and update the same in H/W. */
|
|
for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
|
|
i++, mclist = mclist->next) {
|
|
memcpy(sp->usr_addrs[i].addr, mclist->dmi_addr,
|
|
ETH_ALEN);
|
|
mac_addr = 0;
|
|
for (j = 0; j < ETH_ALEN; j++) {
|
|
mac_addr |= mclist->dmi_addr[j];
|
|
mac_addr <<= 8;
|
|
}
|
|
mac_addr >>= 8;
|
|
writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
|
|
&bar0->rmac_addr_data0_mem);
|
|
writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
|
|
&bar0->rmac_addr_data1_mem);
|
|
val64 = RMAC_ADDR_CMD_MEM_WE |
|
|
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
|
|
RMAC_ADDR_CMD_MEM_OFFSET
|
|
(i + config->mc_start_offset);
|
|
writeq(val64, &bar0->rmac_addr_cmd_mem);
|
|
|
|
/* Wait for command completes */
|
|
if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
|
|
RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
|
|
S2IO_BIT_RESET)) {
|
|
DBG_PRINT(ERR_DBG,
|
|
"%s: Adding Multicasts failed\n",
|
|
dev->name);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* read from CAM unicast & multicast addresses and store it in
|
|
* def_mac_addr structure
|
|
*/
|
|
static void do_s2io_store_unicast_mc(struct s2io_nic *sp)
|
|
{
|
|
int offset;
|
|
u64 mac_addr = 0x0;
|
|
struct config_param *config = &sp->config;
|
|
|
|
/* store unicast & multicast mac addresses */
|
|
for (offset = 0; offset < config->max_mc_addr; offset++) {
|
|
mac_addr = do_s2io_read_unicast_mc(sp, offset);
|
|
/* if read fails disable the entry */
|
|
if (mac_addr == FAILURE)
|
|
mac_addr = S2IO_DISABLE_MAC_ENTRY;
|
|
do_s2io_copy_mac_addr(sp, offset, mac_addr);
|
|
}
|
|
}
|
|
|
|
/* restore unicast & multicast MAC to CAM from def_mac_addr structure */
|
|
static void do_s2io_restore_unicast_mc(struct s2io_nic *sp)
|
|
{
|
|
int offset;
|
|
struct config_param *config = &sp->config;
|
|
/* restore unicast mac address */
|
|
for (offset = 0; offset < config->max_mac_addr; offset++)
|
|
do_s2io_prog_unicast(sp->dev,
|
|
sp->def_mac_addr[offset].mac_addr);
|
|
|
|
/* restore multicast mac address */
|
|
for (offset = config->mc_start_offset;
|
|
offset < config->max_mc_addr; offset++)
|
|
do_s2io_add_mc(sp, sp->def_mac_addr[offset].mac_addr);
|
|
}
|
|
|
|
/* add a multicast MAC address to CAM */
|
|
static int do_s2io_add_mc(struct s2io_nic *sp, u8 *addr)
|
|
{
|
|
int i;
|
|
u64 mac_addr = 0;
|
|
struct config_param *config = &sp->config;
|
|
|
|
for (i = 0; i < ETH_ALEN; i++) {
|
|
mac_addr <<= 8;
|
|
mac_addr |= addr[i];
|
|
}
|
|
if ((0ULL == mac_addr) || (mac_addr == S2IO_DISABLE_MAC_ENTRY))
|
|
return SUCCESS;
|
|
|
|
/* check if the multicast mac already preset in CAM */
|
|
for (i = config->mc_start_offset; i < config->max_mc_addr; i++) {
|
|
u64 tmp64;
|
|
tmp64 = do_s2io_read_unicast_mc(sp, i);
|
|
if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
|
|
break;
|
|
|
|
if (tmp64 == mac_addr)
|
|
return SUCCESS;
|
|
}
|
|
if (i == config->max_mc_addr) {
|
|
DBG_PRINT(ERR_DBG,
|
|
"CAM full no space left for multicast MAC\n");
|
|
return FAILURE;
|
|
}
|
|
/* Update the internal structure with this new mac address */
|
|
do_s2io_copy_mac_addr(sp, i, mac_addr);
|
|
|
|
return do_s2io_add_mac(sp, mac_addr, i);
|
|
}
|
|
|
|
/* add MAC address to CAM */
|
|
static int do_s2io_add_mac(struct s2io_nic *sp, u64 addr, int off)
|
|
{
|
|
u64 val64;
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
|
|
writeq(RMAC_ADDR_DATA0_MEM_ADDR(addr),
|
|
&bar0->rmac_addr_data0_mem);
|
|
|
|
val64 = RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
|
|
RMAC_ADDR_CMD_MEM_OFFSET(off);
|
|
writeq(val64, &bar0->rmac_addr_cmd_mem);
|
|
|
|
/* Wait till command completes */
|
|
if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
|
|
RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
|
|
S2IO_BIT_RESET)) {
|
|
DBG_PRINT(INFO_DBG, "do_s2io_add_mac failed\n");
|
|
return FAILURE;
|
|
}
|
|
return SUCCESS;
|
|
}
|
|
/* deletes a specified unicast/multicast mac entry from CAM */
|
|
static int do_s2io_delete_unicast_mc(struct s2io_nic *sp, u64 addr)
|
|
{
|
|
int offset;
|
|
u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, tmp64;
|
|
struct config_param *config = &sp->config;
|
|
|
|
for (offset = 1;
|
|
offset < config->max_mc_addr; offset++) {
|
|
tmp64 = do_s2io_read_unicast_mc(sp, offset);
|
|
if (tmp64 == addr) {
|
|
/* disable the entry by writing 0xffffffffffffULL */
|
|
if (do_s2io_add_mac(sp, dis_addr, offset) == FAILURE)
|
|
return FAILURE;
|
|
/* store the new mac list from CAM */
|
|
do_s2io_store_unicast_mc(sp);
|
|
return SUCCESS;
|
|
}
|
|
}
|
|
DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n",
|
|
(unsigned long long)addr);
|
|
return FAILURE;
|
|
}
|
|
|
|
/* read mac entries from CAM */
|
|
static u64 do_s2io_read_unicast_mc(struct s2io_nic *sp, int offset)
|
|
{
|
|
u64 tmp64 = 0xffffffffffff0000ULL, val64;
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
|
|
/* read mac addr */
|
|
val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
|
|
RMAC_ADDR_CMD_MEM_OFFSET(offset);
|
|
writeq(val64, &bar0->rmac_addr_cmd_mem);
|
|
|
|
/* Wait till command completes */
|
|
if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
|
|
RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
|
|
S2IO_BIT_RESET)) {
|
|
DBG_PRINT(INFO_DBG, "do_s2io_read_unicast_mc failed\n");
|
|
return FAILURE;
|
|
}
|
|
tmp64 = readq(&bar0->rmac_addr_data0_mem);
|
|
|
|
return tmp64 >> 16;
|
|
}
|
|
|
|
/**
|
|
* s2io_set_mac_addr driver entry point
|
|
*/
|
|
|
|
static int s2io_set_mac_addr(struct net_device *dev, void *p)
|
|
{
|
|
struct sockaddr *addr = p;
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
return -EINVAL;
|
|
|
|
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
|
|
|
|
/* store the MAC address in CAM */
|
|
return do_s2io_prog_unicast(dev, dev->dev_addr);
|
|
}
|
|
/**
|
|
* do_s2io_prog_unicast - Programs the Xframe mac address
|
|
* @dev : pointer to the device structure.
|
|
* @addr: a uchar pointer to the new mac address which is to be set.
|
|
* Description : This procedure will program the Xframe to receive
|
|
* frames with new Mac Address
|
|
* Return value: SUCCESS on success and an appropriate (-)ve integer
|
|
* as defined in errno.h file on failure.
|
|
*/
|
|
|
|
static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr)
|
|
{
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
register u64 mac_addr = 0, perm_addr = 0;
|
|
int i;
|
|
u64 tmp64;
|
|
struct config_param *config = &sp->config;
|
|
|
|
/*
|
|
* Set the new MAC address as the new unicast filter and reflect this
|
|
* change on the device address registered with the OS. It will be
|
|
* at offset 0.
|
|
*/
|
|
for (i = 0; i < ETH_ALEN; i++) {
|
|
mac_addr <<= 8;
|
|
mac_addr |= addr[i];
|
|
perm_addr <<= 8;
|
|
perm_addr |= sp->def_mac_addr[0].mac_addr[i];
|
|
}
|
|
|
|
/* check if the dev_addr is different than perm_addr */
|
|
if (mac_addr == perm_addr)
|
|
return SUCCESS;
|
|
|
|
/* check if the mac already preset in CAM */
|
|
for (i = 1; i < config->max_mac_addr; i++) {
|
|
tmp64 = do_s2io_read_unicast_mc(sp, i);
|
|
if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
|
|
break;
|
|
|
|
if (tmp64 == mac_addr) {
|
|
DBG_PRINT(INFO_DBG,
|
|
"MAC addr:0x%llx already present in CAM\n",
|
|
(unsigned long long)mac_addr);
|
|
return SUCCESS;
|
|
}
|
|
}
|
|
if (i == config->max_mac_addr) {
|
|
DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n");
|
|
return FAILURE;
|
|
}
|
|
/* Update the internal structure with this new mac address */
|
|
do_s2io_copy_mac_addr(sp, i, mac_addr);
|
|
|
|
return do_s2io_add_mac(sp, mac_addr, i);
|
|
}
|
|
|
|
/**
|
|
* s2io_ethtool_sset - Sets different link parameters.
|
|
* @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
|
|
* @info: pointer to the structure with parameters given by ethtool to set
|
|
* link information.
|
|
* Description:
|
|
* The function sets different link parameters provided by the user onto
|
|
* the NIC.
|
|
* Return value:
|
|
* 0 on success.
|
|
*/
|
|
|
|
static int s2io_ethtool_sset(struct net_device *dev,
|
|
struct ethtool_cmd *info)
|
|
{
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
if ((info->autoneg == AUTONEG_ENABLE) ||
|
|
(info->speed != SPEED_10000) ||
|
|
(info->duplex != DUPLEX_FULL))
|
|
return -EINVAL;
|
|
else {
|
|
s2io_close(sp->dev);
|
|
s2io_open(sp->dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* s2io_ethtol_gset - Return link specific information.
|
|
* @sp : private member of the device structure, pointer to the
|
|
* s2io_nic structure.
|
|
* @info : pointer to the structure with parameters given by ethtool
|
|
* to return link information.
|
|
* Description:
|
|
* Returns link specific information like speed, duplex etc.. to ethtool.
|
|
* Return value :
|
|
* return 0 on success.
|
|
*/
|
|
|
|
static int s2io_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info)
|
|
{
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
info->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
|
|
info->advertising = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
|
|
info->port = PORT_FIBRE;
|
|
|
|
/* info->transceiver */
|
|
info->transceiver = XCVR_EXTERNAL;
|
|
|
|
if (netif_carrier_ok(sp->dev)) {
|
|
info->speed = 10000;
|
|
info->duplex = DUPLEX_FULL;
|
|
} else {
|
|
info->speed = -1;
|
|
info->duplex = -1;
|
|
}
|
|
|
|
info->autoneg = AUTONEG_DISABLE;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* s2io_ethtool_gdrvinfo - Returns driver specific information.
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
* s2io_nic structure.
|
|
* @info : pointer to the structure with parameters given by ethtool to
|
|
* return driver information.
|
|
* Description:
|
|
* Returns driver specefic information like name, version etc.. to ethtool.
|
|
* Return value:
|
|
* void
|
|
*/
|
|
|
|
static void s2io_ethtool_gdrvinfo(struct net_device *dev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
|
|
strncpy(info->driver, s2io_driver_name, sizeof(info->driver));
|
|
strncpy(info->version, s2io_driver_version, sizeof(info->version));
|
|
strncpy(info->fw_version, "", sizeof(info->fw_version));
|
|
strncpy(info->bus_info, pci_name(sp->pdev), sizeof(info->bus_info));
|
|
info->regdump_len = XENA_REG_SPACE;
|
|
info->eedump_len = XENA_EEPROM_SPACE;
|
|
}
|
|
|
|
/**
|
|
* s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer.
|
|
* @sp: private member of the device structure, which is a pointer to the
|
|
* s2io_nic structure.
|
|
* @regs : pointer to the structure with parameters given by ethtool for
|
|
* dumping the registers.
|
|
* @reg_space: The input argumnet into which all the registers are dumped.
|
|
* Description:
|
|
* Dumps the entire register space of xFrame NIC into the user given
|
|
* buffer area.
|
|
* Return value :
|
|
* void .
|
|
*/
|
|
|
|
static void s2io_ethtool_gregs(struct net_device *dev,
|
|
struct ethtool_regs *regs, void *space)
|
|
{
|
|
int i;
|
|
u64 reg;
|
|
u8 *reg_space = (u8 *)space;
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
|
|
regs->len = XENA_REG_SPACE;
|
|
regs->version = sp->pdev->subsystem_device;
|
|
|
|
for (i = 0; i < regs->len; i += 8) {
|
|
reg = readq(sp->bar0 + i);
|
|
memcpy((reg_space + i), ®, 8);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* s2io_phy_id - timer function that alternates adapter LED.
|
|
* @data : address of the private member of the device structure, which
|
|
* is a pointer to the s2io_nic structure, provided as an u32.
|
|
* Description: This is actually the timer function that alternates the
|
|
* adapter LED bit of the adapter control bit to set/reset every time on
|
|
* invocation. The timer is set for 1/2 a second, hence tha NIC blinks
|
|
* once every second.
|
|
*/
|
|
static void s2io_phy_id(unsigned long data)
|
|
{
|
|
struct s2io_nic *sp = (struct s2io_nic *)data;
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
u64 val64 = 0;
|
|
u16 subid;
|
|
|
|
subid = sp->pdev->subsystem_device;
|
|
if ((sp->device_type == XFRAME_II_DEVICE) ||
|
|
((subid & 0xFF) >= 0x07)) {
|
|
val64 = readq(&bar0->gpio_control);
|
|
val64 ^= GPIO_CTRL_GPIO_0;
|
|
writeq(val64, &bar0->gpio_control);
|
|
} else {
|
|
val64 = readq(&bar0->adapter_control);
|
|
val64 ^= ADAPTER_LED_ON;
|
|
writeq(val64, &bar0->adapter_control);
|
|
}
|
|
|
|
mod_timer(&sp->id_timer, jiffies + HZ / 2);
|
|
}
|
|
|
|
/**
|
|
* s2io_ethtool_idnic - To physically identify the nic on the system.
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
* s2io_nic structure.
|
|
* @id : pointer to the structure with identification parameters given by
|
|
* ethtool.
|
|
* Description: Used to physically identify the NIC on the system.
|
|
* The Link LED will blink for a time specified by the user for
|
|
* identification.
|
|
* NOTE: The Link has to be Up to be able to blink the LED. Hence
|
|
* identification is possible only if it's link is up.
|
|
* Return value:
|
|
* int , returns 0 on success
|
|
*/
|
|
|
|
static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
|
|
{
|
|
u64 val64 = 0, last_gpio_ctrl_val;
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
u16 subid;
|
|
|
|
subid = sp->pdev->subsystem_device;
|
|
last_gpio_ctrl_val = readq(&bar0->gpio_control);
|
|
if ((sp->device_type == XFRAME_I_DEVICE) && ((subid & 0xFF) < 0x07)) {
|
|
val64 = readq(&bar0->adapter_control);
|
|
if (!(val64 & ADAPTER_CNTL_EN)) {
|
|
pr_err("Adapter Link down, cannot blink LED\n");
|
|
return -EFAULT;
|
|
}
|
|
}
|
|
if (sp->id_timer.function == NULL) {
|
|
init_timer(&sp->id_timer);
|
|
sp->id_timer.function = s2io_phy_id;
|
|
sp->id_timer.data = (unsigned long)sp;
|
|
}
|
|
mod_timer(&sp->id_timer, jiffies);
|
|
if (data)
|
|
msleep_interruptible(data * HZ);
|
|
else
|
|
msleep_interruptible(MAX_FLICKER_TIME);
|
|
del_timer_sync(&sp->id_timer);
|
|
|
|
if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid)) {
|
|
writeq(last_gpio_ctrl_val, &bar0->gpio_control);
|
|
last_gpio_ctrl_val = readq(&bar0->gpio_control);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void s2io_ethtool_gringparam(struct net_device *dev,
|
|
struct ethtool_ringparam *ering)
|
|
{
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
int i, tx_desc_count = 0, rx_desc_count = 0;
|
|
|
|
if (sp->rxd_mode == RXD_MODE_1)
|
|
ering->rx_max_pending = MAX_RX_DESC_1;
|
|
else if (sp->rxd_mode == RXD_MODE_3B)
|
|
ering->rx_max_pending = MAX_RX_DESC_2;
|
|
|
|
ering->tx_max_pending = MAX_TX_DESC;
|
|
for (i = 0 ; i < sp->config.tx_fifo_num ; i++)
|
|
tx_desc_count += sp->config.tx_cfg[i].fifo_len;
|
|
|
|
DBG_PRINT(INFO_DBG, "max txds: %d\n", sp->config.max_txds);
|
|
ering->tx_pending = tx_desc_count;
|
|
rx_desc_count = 0;
|
|
for (i = 0 ; i < sp->config.rx_ring_num ; i++)
|
|
rx_desc_count += sp->config.rx_cfg[i].num_rxd;
|
|
|
|
ering->rx_pending = rx_desc_count;
|
|
|
|
ering->rx_mini_max_pending = 0;
|
|
ering->rx_mini_pending = 0;
|
|
if (sp->rxd_mode == RXD_MODE_1)
|
|
ering->rx_jumbo_max_pending = MAX_RX_DESC_1;
|
|
else if (sp->rxd_mode == RXD_MODE_3B)
|
|
ering->rx_jumbo_max_pending = MAX_RX_DESC_2;
|
|
ering->rx_jumbo_pending = rx_desc_count;
|
|
}
|
|
|
|
/**
|
|
* s2io_ethtool_getpause_data -Pause frame frame generation and reception.
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
* s2io_nic structure.
|
|
* @ep : pointer to the structure with pause parameters given by ethtool.
|
|
* Description:
|
|
* Returns the Pause frame generation and reception capability of the NIC.
|
|
* Return value:
|
|
* void
|
|
*/
|
|
static void s2io_ethtool_getpause_data(struct net_device *dev,
|
|
struct ethtool_pauseparam *ep)
|
|
{
|
|
u64 val64;
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
|
|
val64 = readq(&bar0->rmac_pause_cfg);
|
|
if (val64 & RMAC_PAUSE_GEN_ENABLE)
|
|
ep->tx_pause = true;
|
|
if (val64 & RMAC_PAUSE_RX_ENABLE)
|
|
ep->rx_pause = true;
|
|
ep->autoneg = false;
|
|
}
|
|
|
|
/**
|
|
* s2io_ethtool_setpause_data - set/reset pause frame generation.
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
* s2io_nic structure.
|
|
* @ep : pointer to the structure with pause parameters given by ethtool.
|
|
* Description:
|
|
* It can be used to set or reset Pause frame generation or reception
|
|
* support of the NIC.
|
|
* Return value:
|
|
* int, returns 0 on Success
|
|
*/
|
|
|
|
static int s2io_ethtool_setpause_data(struct net_device *dev,
|
|
struct ethtool_pauseparam *ep)
|
|
{
|
|
u64 val64;
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
|
|
val64 = readq(&bar0->rmac_pause_cfg);
|
|
if (ep->tx_pause)
|
|
val64 |= RMAC_PAUSE_GEN_ENABLE;
|
|
else
|
|
val64 &= ~RMAC_PAUSE_GEN_ENABLE;
|
|
if (ep->rx_pause)
|
|
val64 |= RMAC_PAUSE_RX_ENABLE;
|
|
else
|
|
val64 &= ~RMAC_PAUSE_RX_ENABLE;
|
|
writeq(val64, &bar0->rmac_pause_cfg);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* read_eeprom - reads 4 bytes of data from user given offset.
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
* s2io_nic structure.
|
|
* @off : offset at which the data must be written
|
|
* @data : Its an output parameter where the data read at the given
|
|
* offset is stored.
|
|
* Description:
|
|
* Will read 4 bytes of data from the user given offset and return the
|
|
* read data.
|
|
* NOTE: Will allow to read only part of the EEPROM visible through the
|
|
* I2C bus.
|
|
* Return value:
|
|
* -1 on failure and 0 on success.
|
|
*/
|
|
|
|
#define S2IO_DEV_ID 5
|
|
static int read_eeprom(struct s2io_nic *sp, int off, u64 *data)
|
|
{
|
|
int ret = -1;
|
|
u32 exit_cnt = 0;
|
|
u64 val64;
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
|
|
if (sp->device_type == XFRAME_I_DEVICE) {
|
|
val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) |
|
|
I2C_CONTROL_ADDR(off) |
|
|
I2C_CONTROL_BYTE_CNT(0x3) |
|
|
I2C_CONTROL_READ |
|
|
I2C_CONTROL_CNTL_START;
|
|
SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
|
|
|
|
while (exit_cnt < 5) {
|
|
val64 = readq(&bar0->i2c_control);
|
|
if (I2C_CONTROL_CNTL_END(val64)) {
|
|
*data = I2C_CONTROL_GET_DATA(val64);
|
|
ret = 0;
|
|
break;
|
|
}
|
|
msleep(50);
|
|
exit_cnt++;
|
|
}
|
|
}
|
|
|
|
if (sp->device_type == XFRAME_II_DEVICE) {
|
|
val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
|
|
SPI_CONTROL_BYTECNT(0x3) |
|
|
SPI_CONTROL_CMD(0x3) | SPI_CONTROL_ADDR(off);
|
|
SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
|
|
val64 |= SPI_CONTROL_REQ;
|
|
SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
|
|
while (exit_cnt < 5) {
|
|
val64 = readq(&bar0->spi_control);
|
|
if (val64 & SPI_CONTROL_NACK) {
|
|
ret = 1;
|
|
break;
|
|
} else if (val64 & SPI_CONTROL_DONE) {
|
|
*data = readq(&bar0->spi_data);
|
|
*data &= 0xffffff;
|
|
ret = 0;
|
|
break;
|
|
}
|
|
msleep(50);
|
|
exit_cnt++;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* write_eeprom - actually writes the relevant part of the data value.
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
* s2io_nic structure.
|
|
* @off : offset at which the data must be written
|
|
* @data : The data that is to be written
|
|
* @cnt : Number of bytes of the data that are actually to be written into
|
|
* the Eeprom. (max of 3)
|
|
* Description:
|
|
* Actually writes the relevant part of the data value into the Eeprom
|
|
* through the I2C bus.
|
|
* Return value:
|
|
* 0 on success, -1 on failure.
|
|
*/
|
|
|
|
static int write_eeprom(struct s2io_nic *sp, int off, u64 data, int cnt)
|
|
{
|
|
int exit_cnt = 0, ret = -1;
|
|
u64 val64;
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
|
|
if (sp->device_type == XFRAME_I_DEVICE) {
|
|
val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) |
|
|
I2C_CONTROL_ADDR(off) |
|
|
I2C_CONTROL_BYTE_CNT(cnt) |
|
|
I2C_CONTROL_SET_DATA((u32)data) |
|
|
I2C_CONTROL_CNTL_START;
|
|
SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
|
|
|
|
while (exit_cnt < 5) {
|
|
val64 = readq(&bar0->i2c_control);
|
|
if (I2C_CONTROL_CNTL_END(val64)) {
|
|
if (!(val64 & I2C_CONTROL_NACK))
|
|
ret = 0;
|
|
break;
|
|
}
|
|
msleep(50);
|
|
exit_cnt++;
|
|
}
|
|
}
|
|
|
|
if (sp->device_type == XFRAME_II_DEVICE) {
|
|
int write_cnt = (cnt == 8) ? 0 : cnt;
|
|
writeq(SPI_DATA_WRITE(data, (cnt << 3)), &bar0->spi_data);
|
|
|
|
val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
|
|
SPI_CONTROL_BYTECNT(write_cnt) |
|
|
SPI_CONTROL_CMD(0x2) | SPI_CONTROL_ADDR(off);
|
|
SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
|
|
val64 |= SPI_CONTROL_REQ;
|
|
SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
|
|
while (exit_cnt < 5) {
|
|
val64 = readq(&bar0->spi_control);
|
|
if (val64 & SPI_CONTROL_NACK) {
|
|
ret = 1;
|
|
break;
|
|
} else if (val64 & SPI_CONTROL_DONE) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
msleep(50);
|
|
exit_cnt++;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
static void s2io_vpd_read(struct s2io_nic *nic)
|
|
{
|
|
u8 *vpd_data;
|
|
u8 data;
|
|
int i = 0, cnt, fail = 0;
|
|
int vpd_addr = 0x80;
|
|
struct swStat *swstats = &nic->mac_control.stats_info->sw_stat;
|
|
|
|
if (nic->device_type == XFRAME_II_DEVICE) {
|
|
strcpy(nic->product_name, "Xframe II 10GbE network adapter");
|
|
vpd_addr = 0x80;
|
|
} else {
|
|
strcpy(nic->product_name, "Xframe I 10GbE network adapter");
|
|
vpd_addr = 0x50;
|
|
}
|
|
strcpy(nic->serial_num, "NOT AVAILABLE");
|
|
|
|
vpd_data = kmalloc(256, GFP_KERNEL);
|
|
if (!vpd_data) {
|
|
swstats->mem_alloc_fail_cnt++;
|
|
return;
|
|
}
|
|
swstats->mem_allocated += 256;
|
|
|
|
for (i = 0; i < 256; i += 4) {
|
|
pci_write_config_byte(nic->pdev, (vpd_addr + 2), i);
|
|
pci_read_config_byte(nic->pdev, (vpd_addr + 2), &data);
|
|
pci_write_config_byte(nic->pdev, (vpd_addr + 3), 0);
|
|
for (cnt = 0; cnt < 5; cnt++) {
|
|
msleep(2);
|
|
pci_read_config_byte(nic->pdev, (vpd_addr + 3), &data);
|
|
if (data == 0x80)
|
|
break;
|
|
}
|
|
if (cnt >= 5) {
|
|
DBG_PRINT(ERR_DBG, "Read of VPD data failed\n");
|
|
fail = 1;
|
|
break;
|
|
}
|
|
pci_read_config_dword(nic->pdev, (vpd_addr + 4),
|
|
(u32 *)&vpd_data[i]);
|
|
}
|
|
|
|
if (!fail) {
|
|
/* read serial number of adapter */
|
|
for (cnt = 0; cnt < 256; cnt++) {
|
|
if ((vpd_data[cnt] == 'S') &&
|
|
(vpd_data[cnt+1] == 'N') &&
|
|
(vpd_data[cnt+2] < VPD_STRING_LEN)) {
|
|
memset(nic->serial_num, 0, VPD_STRING_LEN);
|
|
memcpy(nic->serial_num, &vpd_data[cnt + 3],
|
|
vpd_data[cnt+2]);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if ((!fail) && (vpd_data[1] < VPD_STRING_LEN)) {
|
|
memset(nic->product_name, 0, vpd_data[1]);
|
|
memcpy(nic->product_name, &vpd_data[3], vpd_data[1]);
|
|
}
|
|
kfree(vpd_data);
|
|
swstats->mem_freed += 256;
|
|
}
|
|
|
|
/**
|
|
* s2io_ethtool_geeprom - reads the value stored in the Eeprom.
|
|
* @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
|
|
* @eeprom : pointer to the user level structure provided by ethtool,
|
|
* containing all relevant information.
|
|
* @data_buf : user defined value to be written into Eeprom.
|
|
* Description: Reads the values stored in the Eeprom at given offset
|
|
* for a given length. Stores these values int the input argument data
|
|
* buffer 'data_buf' and returns these to the caller (ethtool.)
|
|
* Return value:
|
|
* int 0 on success
|
|
*/
|
|
|
|
static int s2io_ethtool_geeprom(struct net_device *dev,
|
|
struct ethtool_eeprom *eeprom, u8 * data_buf)
|
|
{
|
|
u32 i, valid;
|
|
u64 data;
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
|
|
eeprom->magic = sp->pdev->vendor | (sp->pdev->device << 16);
|
|
|
|
if ((eeprom->offset + eeprom->len) > (XENA_EEPROM_SPACE))
|
|
eeprom->len = XENA_EEPROM_SPACE - eeprom->offset;
|
|
|
|
for (i = 0; i < eeprom->len; i += 4) {
|
|
if (read_eeprom(sp, (eeprom->offset + i), &data)) {
|
|
DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n");
|
|
return -EFAULT;
|
|
}
|
|
valid = INV(data);
|
|
memcpy((data_buf + i), &valid, 4);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* s2io_ethtool_seeprom - tries to write the user provided value in Eeprom
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
* s2io_nic structure.
|
|
* @eeprom : pointer to the user level structure provided by ethtool,
|
|
* containing all relevant information.
|
|
* @data_buf ; user defined value to be written into Eeprom.
|
|
* Description:
|
|
* Tries to write the user provided value in the Eeprom, at the offset
|
|
* given by the user.
|
|
* Return value:
|
|
* 0 on success, -EFAULT on failure.
|
|
*/
|
|
|
|
static int s2io_ethtool_seeprom(struct net_device *dev,
|
|
struct ethtool_eeprom *eeprom,
|
|
u8 *data_buf)
|
|
{
|
|
int len = eeprom->len, cnt = 0;
|
|
u64 valid = 0, data;
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
|
|
if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) {
|
|
DBG_PRINT(ERR_DBG,
|
|
"ETHTOOL_WRITE_EEPROM Err: "
|
|
"Magic value is wrong, it is 0x%x should be 0x%x\n",
|
|
(sp->pdev->vendor | (sp->pdev->device << 16)),
|
|
eeprom->magic);
|
|
return -EFAULT;
|
|
}
|
|
|
|
while (len) {
|
|
data = (u32)data_buf[cnt] & 0x000000FF;
|
|
if (data)
|
|
valid = (u32)(data << 24);
|
|
else
|
|
valid = data;
|
|
|
|
if (write_eeprom(sp, (eeprom->offset + cnt), valid, 0)) {
|
|
DBG_PRINT(ERR_DBG,
|
|
"ETHTOOL_WRITE_EEPROM Err: "
|
|
"Cannot write into the specified offset\n");
|
|
return -EFAULT;
|
|
}
|
|
cnt++;
|
|
len--;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* s2io_register_test - reads and writes into all clock domains.
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
* s2io_nic structure.
|
|
* @data : variable that returns the result of each of the test conducted b
|
|
* by the driver.
|
|
* Description:
|
|
* Read and write into all clock domains. The NIC has 3 clock domains,
|
|
* see that registers in all the three regions are accessible.
|
|
* Return value:
|
|
* 0 on success.
|
|
*/
|
|
|
|
static int s2io_register_test(struct s2io_nic *sp, uint64_t *data)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
u64 val64 = 0, exp_val;
|
|
int fail = 0;
|
|
|
|
val64 = readq(&bar0->pif_rd_swapper_fb);
|
|
if (val64 != 0x123456789abcdefULL) {
|
|
fail = 1;
|
|
DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 1);
|
|
}
|
|
|
|
val64 = readq(&bar0->rmac_pause_cfg);
|
|
if (val64 != 0xc000ffff00000000ULL) {
|
|
fail = 1;
|
|
DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 2);
|
|
}
|
|
|
|
val64 = readq(&bar0->rx_queue_cfg);
|
|
if (sp->device_type == XFRAME_II_DEVICE)
|
|
exp_val = 0x0404040404040404ULL;
|
|
else
|
|
exp_val = 0x0808080808080808ULL;
|
|
if (val64 != exp_val) {
|
|
fail = 1;
|
|
DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 3);
|
|
}
|
|
|
|
val64 = readq(&bar0->xgxs_efifo_cfg);
|
|
if (val64 != 0x000000001923141EULL) {
|
|
fail = 1;
|
|
DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 4);
|
|
}
|
|
|
|
val64 = 0x5A5A5A5A5A5A5A5AULL;
|
|
writeq(val64, &bar0->xmsi_data);
|
|
val64 = readq(&bar0->xmsi_data);
|
|
if (val64 != 0x5A5A5A5A5A5A5A5AULL) {
|
|
fail = 1;
|
|
DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 1);
|
|
}
|
|
|
|
val64 = 0xA5A5A5A5A5A5A5A5ULL;
|
|
writeq(val64, &bar0->xmsi_data);
|
|
val64 = readq(&bar0->xmsi_data);
|
|
if (val64 != 0xA5A5A5A5A5A5A5A5ULL) {
|
|
fail = 1;
|
|
DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 2);
|
|
}
|
|
|
|
*data = fail;
|
|
return fail;
|
|
}
|
|
|
|
/**
|
|
* s2io_eeprom_test - to verify that EEprom in the xena can be programmed.
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
* s2io_nic structure.
|
|
* @data:variable that returns the result of each of the test conducted by
|
|
* the driver.
|
|
* Description:
|
|
* Verify that EEPROM in the xena can be programmed using I2C_CONTROL
|
|
* register.
|
|
* Return value:
|
|
* 0 on success.
|
|
*/
|
|
|
|
static int s2io_eeprom_test(struct s2io_nic *sp, uint64_t *data)
|
|
{
|
|
int fail = 0;
|
|
u64 ret_data, org_4F0, org_7F0;
|
|
u8 saved_4F0 = 0, saved_7F0 = 0;
|
|
struct net_device *dev = sp->dev;
|
|
|
|
/* Test Write Error at offset 0 */
|
|
/* Note that SPI interface allows write access to all areas
|
|
* of EEPROM. Hence doing all negative testing only for Xframe I.
|
|
*/
|
|
if (sp->device_type == XFRAME_I_DEVICE)
|
|
if (!write_eeprom(sp, 0, 0, 3))
|
|
fail = 1;
|
|
|
|
/* Save current values at offsets 0x4F0 and 0x7F0 */
|
|
if (!read_eeprom(sp, 0x4F0, &org_4F0))
|
|
saved_4F0 = 1;
|
|
if (!read_eeprom(sp, 0x7F0, &org_7F0))
|
|
saved_7F0 = 1;
|
|
|
|
/* Test Write at offset 4f0 */
|
|
if (write_eeprom(sp, 0x4F0, 0x012345, 3))
|
|
fail = 1;
|
|
if (read_eeprom(sp, 0x4F0, &ret_data))
|
|
fail = 1;
|
|
|
|
if (ret_data != 0x012345) {
|
|
DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. "
|
|
"Data written %llx Data read %llx\n",
|
|
dev->name, (unsigned long long)0x12345,
|
|
(unsigned long long)ret_data);
|
|
fail = 1;
|
|
}
|
|
|
|
/* Reset the EEPROM data go FFFF */
|
|
write_eeprom(sp, 0x4F0, 0xFFFFFF, 3);
|
|
|
|
/* Test Write Request Error at offset 0x7c */
|
|
if (sp->device_type == XFRAME_I_DEVICE)
|
|
if (!write_eeprom(sp, 0x07C, 0, 3))
|
|
fail = 1;
|
|
|
|
/* Test Write Request at offset 0x7f0 */
|
|
if (write_eeprom(sp, 0x7F0, 0x012345, 3))
|
|
fail = 1;
|
|
if (read_eeprom(sp, 0x7F0, &ret_data))
|
|
fail = 1;
|
|
|
|
if (ret_data != 0x012345) {
|
|
DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. "
|
|
"Data written %llx Data read %llx\n",
|
|
dev->name, (unsigned long long)0x12345,
|
|
(unsigned long long)ret_data);
|
|
fail = 1;
|
|
}
|
|
|
|
/* Reset the EEPROM data go FFFF */
|
|
write_eeprom(sp, 0x7F0, 0xFFFFFF, 3);
|
|
|
|
if (sp->device_type == XFRAME_I_DEVICE) {
|
|
/* Test Write Error at offset 0x80 */
|
|
if (!write_eeprom(sp, 0x080, 0, 3))
|
|
fail = 1;
|
|
|
|
/* Test Write Error at offset 0xfc */
|
|
if (!write_eeprom(sp, 0x0FC, 0, 3))
|
|
fail = 1;
|
|
|
|
/* Test Write Error at offset 0x100 */
|
|
if (!write_eeprom(sp, 0x100, 0, 3))
|
|
fail = 1;
|
|
|
|
/* Test Write Error at offset 4ec */
|
|
if (!write_eeprom(sp, 0x4EC, 0, 3))
|
|
fail = 1;
|
|
}
|
|
|
|
/* Restore values at offsets 0x4F0 and 0x7F0 */
|
|
if (saved_4F0)
|
|
write_eeprom(sp, 0x4F0, org_4F0, 3);
|
|
if (saved_7F0)
|
|
write_eeprom(sp, 0x7F0, org_7F0, 3);
|
|
|
|
*data = fail;
|
|
return fail;
|
|
}
|
|
|
|
/**
|
|
* s2io_bist_test - invokes the MemBist test of the card .
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
* s2io_nic structure.
|
|
* @data:variable that returns the result of each of the test conducted by
|
|
* the driver.
|
|
* Description:
|
|
* This invokes the MemBist test of the card. We give around
|
|
* 2 secs time for the Test to complete. If it's still not complete
|
|
* within this peiod, we consider that the test failed.
|
|
* Return value:
|
|
* 0 on success and -1 on failure.
|
|
*/
|
|
|
|
static int s2io_bist_test(struct s2io_nic *sp, uint64_t *data)
|
|
{
|
|
u8 bist = 0;
|
|
int cnt = 0, ret = -1;
|
|
|
|
pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
|
|
bist |= PCI_BIST_START;
|
|
pci_write_config_word(sp->pdev, PCI_BIST, bist);
|
|
|
|
while (cnt < 20) {
|
|
pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
|
|
if (!(bist & PCI_BIST_START)) {
|
|
*data = (bist & PCI_BIST_CODE_MASK);
|
|
ret = 0;
|
|
break;
|
|
}
|
|
msleep(100);
|
|
cnt++;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* s2io-link_test - verifies the link state of the nic
|
|
* @sp ; private member of the device structure, which is a pointer to the
|
|
* s2io_nic structure.
|
|
* @data: variable that returns the result of each of the test conducted by
|
|
* the driver.
|
|
* Description:
|
|
* The function verifies the link state of the NIC and updates the input
|
|
* argument 'data' appropriately.
|
|
* Return value:
|
|
* 0 on success.
|
|
*/
|
|
|
|
static int s2io_link_test(struct s2io_nic *sp, uint64_t *data)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
u64 val64;
|
|
|
|
val64 = readq(&bar0->adapter_status);
|
|
if (!(LINK_IS_UP(val64)))
|
|
*data = 1;
|
|
else
|
|
*data = 0;
|
|
|
|
return *data;
|
|
}
|
|
|
|
/**
|
|
* s2io_rldram_test - offline test for access to the RldRam chip on the NIC
|
|
* @sp - private member of the device structure, which is a pointer to the
|
|
* s2io_nic structure.
|
|
* @data - variable that returns the result of each of the test
|
|
* conducted by the driver.
|
|
* Description:
|
|
* This is one of the offline test that tests the read and write
|
|
* access to the RldRam chip on the NIC.
|
|
* Return value:
|
|
* 0 on success.
|
|
*/
|
|
|
|
static int s2io_rldram_test(struct s2io_nic *sp, uint64_t *data)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
u64 val64;
|
|
int cnt, iteration = 0, test_fail = 0;
|
|
|
|
val64 = readq(&bar0->adapter_control);
|
|
val64 &= ~ADAPTER_ECC_EN;
|
|
writeq(val64, &bar0->adapter_control);
|
|
|
|
val64 = readq(&bar0->mc_rldram_test_ctrl);
|
|
val64 |= MC_RLDRAM_TEST_MODE;
|
|
SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
|
|
|
|
val64 = readq(&bar0->mc_rldram_mrs);
|
|
val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE;
|
|
SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
|
|
|
|
val64 |= MC_RLDRAM_MRS_ENABLE;
|
|
SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
|
|
|
|
while (iteration < 2) {
|
|
val64 = 0x55555555aaaa0000ULL;
|
|
if (iteration == 1)
|
|
val64 ^= 0xFFFFFFFFFFFF0000ULL;
|
|
writeq(val64, &bar0->mc_rldram_test_d0);
|
|
|
|
val64 = 0xaaaa5a5555550000ULL;
|
|
if (iteration == 1)
|
|
val64 ^= 0xFFFFFFFFFFFF0000ULL;
|
|
writeq(val64, &bar0->mc_rldram_test_d1);
|
|
|
|
val64 = 0x55aaaaaaaa5a0000ULL;
|
|
if (iteration == 1)
|
|
val64 ^= 0xFFFFFFFFFFFF0000ULL;
|
|
writeq(val64, &bar0->mc_rldram_test_d2);
|
|
|
|
val64 = (u64) (0x0000003ffffe0100ULL);
|
|
writeq(val64, &bar0->mc_rldram_test_add);
|
|
|
|
val64 = MC_RLDRAM_TEST_MODE |
|
|
MC_RLDRAM_TEST_WRITE |
|
|
MC_RLDRAM_TEST_GO;
|
|
SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
|
|
|
|
for (cnt = 0; cnt < 5; cnt++) {
|
|
val64 = readq(&bar0->mc_rldram_test_ctrl);
|
|
if (val64 & MC_RLDRAM_TEST_DONE)
|
|
break;
|
|
msleep(200);
|
|
}
|
|
|
|
if (cnt == 5)
|
|
break;
|
|
|
|
val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO;
|
|
SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
|
|
|
|
for (cnt = 0; cnt < 5; cnt++) {
|
|
val64 = readq(&bar0->mc_rldram_test_ctrl);
|
|
if (val64 & MC_RLDRAM_TEST_DONE)
|
|
break;
|
|
msleep(500);
|
|
}
|
|
|
|
if (cnt == 5)
|
|
break;
|
|
|
|
val64 = readq(&bar0->mc_rldram_test_ctrl);
|
|
if (!(val64 & MC_RLDRAM_TEST_PASS))
|
|
test_fail = 1;
|
|
|
|
iteration++;
|
|
}
|
|
|
|
*data = test_fail;
|
|
|
|
/* Bring the adapter out of test mode */
|
|
SPECIAL_REG_WRITE(0, &bar0->mc_rldram_test_ctrl, LF);
|
|
|
|
return test_fail;
|
|
}
|
|
|
|
/**
|
|
* s2io_ethtool_test - conducts 6 tsets to determine the health of card.
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
* s2io_nic structure.
|
|
* @ethtest : pointer to a ethtool command specific structure that will be
|
|
* returned to the user.
|
|
* @data : variable that returns the result of each of the test
|
|
* conducted by the driver.
|
|
* Description:
|
|
* This function conducts 6 tests ( 4 offline and 2 online) to determine
|
|
* the health of the card.
|
|
* Return value:
|
|
* void
|
|
*/
|
|
|
|
static void s2io_ethtool_test(struct net_device *dev,
|
|
struct ethtool_test *ethtest,
|
|
uint64_t *data)
|
|
{
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
int orig_state = netif_running(sp->dev);
|
|
|
|
if (ethtest->flags == ETH_TEST_FL_OFFLINE) {
|
|
/* Offline Tests. */
|
|
if (orig_state)
|
|
s2io_close(sp->dev);
|
|
|
|
if (s2io_register_test(sp, &data[0]))
|
|
ethtest->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
s2io_reset(sp);
|
|
|
|
if (s2io_rldram_test(sp, &data[3]))
|
|
ethtest->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
s2io_reset(sp);
|
|
|
|
if (s2io_eeprom_test(sp, &data[1]))
|
|
ethtest->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
if (s2io_bist_test(sp, &data[4]))
|
|
ethtest->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
if (orig_state)
|
|
s2io_open(sp->dev);
|
|
|
|
data[2] = 0;
|
|
} else {
|
|
/* Online Tests. */
|
|
if (!orig_state) {
|
|
DBG_PRINT(ERR_DBG, "%s: is not up, cannot run test\n",
|
|
dev->name);
|
|
data[0] = -1;
|
|
data[1] = -1;
|
|
data[2] = -1;
|
|
data[3] = -1;
|
|
data[4] = -1;
|
|
}
|
|
|
|
if (s2io_link_test(sp, &data[2]))
|
|
ethtest->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
data[0] = 0;
|
|
data[1] = 0;
|
|
data[3] = 0;
|
|
data[4] = 0;
|
|
}
|
|
}
|
|
|
|
static void s2io_get_ethtool_stats(struct net_device *dev,
|
|
struct ethtool_stats *estats,
|
|
u64 *tmp_stats)
|
|
{
|
|
int i = 0, k;
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
struct stat_block *stats = sp->mac_control.stats_info;
|
|
struct swStat *swstats = &stats->sw_stat;
|
|
struct xpakStat *xstats = &stats->xpak_stat;
|
|
|
|
s2io_updt_stats(sp);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->tmac_frms_oflow) << 32 |
|
|
le32_to_cpu(stats->tmac_frms);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->tmac_data_octets_oflow) << 32 |
|
|
le32_to_cpu(stats->tmac_data_octets);
|
|
tmp_stats[i++] = le64_to_cpu(stats->tmac_drop_frms);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->tmac_mcst_frms_oflow) << 32 |
|
|
le32_to_cpu(stats->tmac_mcst_frms);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->tmac_bcst_frms_oflow) << 32 |
|
|
le32_to_cpu(stats->tmac_bcst_frms);
|
|
tmp_stats[i++] = le64_to_cpu(stats->tmac_pause_ctrl_frms);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->tmac_ttl_octets_oflow) << 32 |
|
|
le32_to_cpu(stats->tmac_ttl_octets);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->tmac_ucst_frms_oflow) << 32 |
|
|
le32_to_cpu(stats->tmac_ucst_frms);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->tmac_nucst_frms_oflow) << 32 |
|
|
le32_to_cpu(stats->tmac_nucst_frms);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->tmac_any_err_frms_oflow) << 32 |
|
|
le32_to_cpu(stats->tmac_any_err_frms);
|
|
tmp_stats[i++] = le64_to_cpu(stats->tmac_ttl_less_fb_octets);
|
|
tmp_stats[i++] = le64_to_cpu(stats->tmac_vld_ip_octets);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->tmac_vld_ip_oflow) << 32 |
|
|
le32_to_cpu(stats->tmac_vld_ip);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->tmac_drop_ip_oflow) << 32 |
|
|
le32_to_cpu(stats->tmac_drop_ip);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->tmac_icmp_oflow) << 32 |
|
|
le32_to_cpu(stats->tmac_icmp);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->tmac_rst_tcp_oflow) << 32 |
|
|
le32_to_cpu(stats->tmac_rst_tcp);
|
|
tmp_stats[i++] = le64_to_cpu(stats->tmac_tcp);
|
|
tmp_stats[i++] = (u64)le32_to_cpu(stats->tmac_udp_oflow) << 32 |
|
|
le32_to_cpu(stats->tmac_udp);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_vld_frms_oflow) << 32 |
|
|
le32_to_cpu(stats->rmac_vld_frms);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_data_octets_oflow) << 32 |
|
|
le32_to_cpu(stats->rmac_data_octets);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_fcs_err_frms);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_drop_frms);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_vld_mcst_frms_oflow) << 32 |
|
|
le32_to_cpu(stats->rmac_vld_mcst_frms);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_vld_bcst_frms_oflow) << 32 |
|
|
le32_to_cpu(stats->rmac_vld_bcst_frms);
|
|
tmp_stats[i++] = le32_to_cpu(stats->rmac_in_rng_len_err_frms);
|
|
tmp_stats[i++] = le32_to_cpu(stats->rmac_out_rng_len_err_frms);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_long_frms);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_pause_ctrl_frms);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_unsup_ctrl_frms);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_ttl_octets_oflow) << 32 |
|
|
le32_to_cpu(stats->rmac_ttl_octets);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_accepted_ucst_frms_oflow) << 32
|
|
| le32_to_cpu(stats->rmac_accepted_ucst_frms);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_accepted_nucst_frms_oflow)
|
|
<< 32 | le32_to_cpu(stats->rmac_accepted_nucst_frms);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_discarded_frms_oflow) << 32 |
|
|
le32_to_cpu(stats->rmac_discarded_frms);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_drop_events_oflow)
|
|
<< 32 | le32_to_cpu(stats->rmac_drop_events);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_less_fb_octets);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_frms);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_usized_frms_oflow) << 32 |
|
|
le32_to_cpu(stats->rmac_usized_frms);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_osized_frms_oflow) << 32 |
|
|
le32_to_cpu(stats->rmac_osized_frms);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_frag_frms_oflow) << 32 |
|
|
le32_to_cpu(stats->rmac_frag_frms);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_jabber_frms_oflow) << 32 |
|
|
le32_to_cpu(stats->rmac_jabber_frms);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_64_frms);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_65_127_frms);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_128_255_frms);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_256_511_frms);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_512_1023_frms);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_1024_1518_frms);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_ip_oflow) << 32 |
|
|
le32_to_cpu(stats->rmac_ip);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_ip_octets);
|
|
tmp_stats[i++] = le32_to_cpu(stats->rmac_hdr_err_ip);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_drop_ip_oflow) << 32 |
|
|
le32_to_cpu(stats->rmac_drop_ip);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_icmp_oflow) << 32 |
|
|
le32_to_cpu(stats->rmac_icmp);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_tcp);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_udp_oflow) << 32 |
|
|
le32_to_cpu(stats->rmac_udp);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_err_drp_udp_oflow) << 32 |
|
|
le32_to_cpu(stats->rmac_err_drp_udp);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_xgmii_err_sym);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q0);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q1);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q2);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q3);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q4);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q5);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q6);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q7);
|
|
tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q0);
|
|
tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q1);
|
|
tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q2);
|
|
tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q3);
|
|
tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q4);
|
|
tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q5);
|
|
tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q6);
|
|
tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q7);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_pause_cnt_oflow) << 32 |
|
|
le32_to_cpu(stats->rmac_pause_cnt);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_xgmii_data_err_cnt);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_xgmii_ctrl_err_cnt);
|
|
tmp_stats[i++] =
|
|
(u64)le32_to_cpu(stats->rmac_accepted_ip_oflow) << 32 |
|
|
le32_to_cpu(stats->rmac_accepted_ip);
|
|
tmp_stats[i++] = le32_to_cpu(stats->rmac_err_tcp);
|
|
tmp_stats[i++] = le32_to_cpu(stats->rd_req_cnt);
|
|
tmp_stats[i++] = le32_to_cpu(stats->new_rd_req_cnt);
|
|
tmp_stats[i++] = le32_to_cpu(stats->new_rd_req_rtry_cnt);
|
|
tmp_stats[i++] = le32_to_cpu(stats->rd_rtry_cnt);
|
|
tmp_stats[i++] = le32_to_cpu(stats->wr_rtry_rd_ack_cnt);
|
|
tmp_stats[i++] = le32_to_cpu(stats->wr_req_cnt);
|
|
tmp_stats[i++] = le32_to_cpu(stats->new_wr_req_cnt);
|
|
tmp_stats[i++] = le32_to_cpu(stats->new_wr_req_rtry_cnt);
|
|
tmp_stats[i++] = le32_to_cpu(stats->wr_rtry_cnt);
|
|
tmp_stats[i++] = le32_to_cpu(stats->wr_disc_cnt);
|
|
tmp_stats[i++] = le32_to_cpu(stats->rd_rtry_wr_ack_cnt);
|
|
tmp_stats[i++] = le32_to_cpu(stats->txp_wr_cnt);
|
|
tmp_stats[i++] = le32_to_cpu(stats->txd_rd_cnt);
|
|
tmp_stats[i++] = le32_to_cpu(stats->txd_wr_cnt);
|
|
tmp_stats[i++] = le32_to_cpu(stats->rxd_rd_cnt);
|
|
tmp_stats[i++] = le32_to_cpu(stats->rxd_wr_cnt);
|
|
tmp_stats[i++] = le32_to_cpu(stats->txf_rd_cnt);
|
|
tmp_stats[i++] = le32_to_cpu(stats->rxf_wr_cnt);
|
|
|
|
/* Enhanced statistics exist only for Hercules */
|
|
if (sp->device_type == XFRAME_II_DEVICE) {
|
|
tmp_stats[i++] =
|
|
le64_to_cpu(stats->rmac_ttl_1519_4095_frms);
|
|
tmp_stats[i++] =
|
|
le64_to_cpu(stats->rmac_ttl_4096_8191_frms);
|
|
tmp_stats[i++] =
|
|
le64_to_cpu(stats->rmac_ttl_8192_max_frms);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_gt_max_frms);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_osized_alt_frms);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_jabber_alt_frms);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_gt_max_alt_frms);
|
|
tmp_stats[i++] = le64_to_cpu(stats->rmac_vlan_frms);
|
|
tmp_stats[i++] = le32_to_cpu(stats->rmac_len_discard);
|
|
tmp_stats[i++] = le32_to_cpu(stats->rmac_fcs_discard);
|
|
tmp_stats[i++] = le32_to_cpu(stats->rmac_pf_discard);
|
|
tmp_stats[i++] = le32_to_cpu(stats->rmac_da_discard);
|
|
tmp_stats[i++] = le32_to_cpu(stats->rmac_red_discard);
|
|
tmp_stats[i++] = le32_to_cpu(stats->rmac_rts_discard);
|
|
tmp_stats[i++] = le32_to_cpu(stats->rmac_ingm_full_discard);
|
|
tmp_stats[i++] = le32_to_cpu(stats->link_fault_cnt);
|
|
}
|
|
|
|
tmp_stats[i++] = 0;
|
|
tmp_stats[i++] = swstats->single_ecc_errs;
|
|
tmp_stats[i++] = swstats->double_ecc_errs;
|
|
tmp_stats[i++] = swstats->parity_err_cnt;
|
|
tmp_stats[i++] = swstats->serious_err_cnt;
|
|
tmp_stats[i++] = swstats->soft_reset_cnt;
|
|
tmp_stats[i++] = swstats->fifo_full_cnt;
|
|
for (k = 0; k < MAX_RX_RINGS; k++)
|
|
tmp_stats[i++] = swstats->ring_full_cnt[k];
|
|
tmp_stats[i++] = xstats->alarm_transceiver_temp_high;
|
|
tmp_stats[i++] = xstats->alarm_transceiver_temp_low;
|
|
tmp_stats[i++] = xstats->alarm_laser_bias_current_high;
|
|
tmp_stats[i++] = xstats->alarm_laser_bias_current_low;
|
|
tmp_stats[i++] = xstats->alarm_laser_output_power_high;
|
|
tmp_stats[i++] = xstats->alarm_laser_output_power_low;
|
|
tmp_stats[i++] = xstats->warn_transceiver_temp_high;
|
|
tmp_stats[i++] = xstats->warn_transceiver_temp_low;
|
|
tmp_stats[i++] = xstats->warn_laser_bias_current_high;
|
|
tmp_stats[i++] = xstats->warn_laser_bias_current_low;
|
|
tmp_stats[i++] = xstats->warn_laser_output_power_high;
|
|
tmp_stats[i++] = xstats->warn_laser_output_power_low;
|
|
tmp_stats[i++] = swstats->clubbed_frms_cnt;
|
|
tmp_stats[i++] = swstats->sending_both;
|
|
tmp_stats[i++] = swstats->outof_sequence_pkts;
|
|
tmp_stats[i++] = swstats->flush_max_pkts;
|
|
if (swstats->num_aggregations) {
|
|
u64 tmp = swstats->sum_avg_pkts_aggregated;
|
|
int count = 0;
|
|
/*
|
|
* Since 64-bit divide does not work on all platforms,
|
|
* do repeated subtraction.
|
|
*/
|
|
while (tmp >= swstats->num_aggregations) {
|
|
tmp -= swstats->num_aggregations;
|
|
count++;
|
|
}
|
|
tmp_stats[i++] = count;
|
|
} else
|
|
tmp_stats[i++] = 0;
|
|
tmp_stats[i++] = swstats->mem_alloc_fail_cnt;
|
|
tmp_stats[i++] = swstats->pci_map_fail_cnt;
|
|
tmp_stats[i++] = swstats->watchdog_timer_cnt;
|
|
tmp_stats[i++] = swstats->mem_allocated;
|
|
tmp_stats[i++] = swstats->mem_freed;
|
|
tmp_stats[i++] = swstats->link_up_cnt;
|
|
tmp_stats[i++] = swstats->link_down_cnt;
|
|
tmp_stats[i++] = swstats->link_up_time;
|
|
tmp_stats[i++] = swstats->link_down_time;
|
|
|
|
tmp_stats[i++] = swstats->tx_buf_abort_cnt;
|
|
tmp_stats[i++] = swstats->tx_desc_abort_cnt;
|
|
tmp_stats[i++] = swstats->tx_parity_err_cnt;
|
|
tmp_stats[i++] = swstats->tx_link_loss_cnt;
|
|
tmp_stats[i++] = swstats->tx_list_proc_err_cnt;
|
|
|
|
tmp_stats[i++] = swstats->rx_parity_err_cnt;
|
|
tmp_stats[i++] = swstats->rx_abort_cnt;
|
|
tmp_stats[i++] = swstats->rx_parity_abort_cnt;
|
|
tmp_stats[i++] = swstats->rx_rda_fail_cnt;
|
|
tmp_stats[i++] = swstats->rx_unkn_prot_cnt;
|
|
tmp_stats[i++] = swstats->rx_fcs_err_cnt;
|
|
tmp_stats[i++] = swstats->rx_buf_size_err_cnt;
|
|
tmp_stats[i++] = swstats->rx_rxd_corrupt_cnt;
|
|
tmp_stats[i++] = swstats->rx_unkn_err_cnt;
|
|
tmp_stats[i++] = swstats->tda_err_cnt;
|
|
tmp_stats[i++] = swstats->pfc_err_cnt;
|
|
tmp_stats[i++] = swstats->pcc_err_cnt;
|
|
tmp_stats[i++] = swstats->tti_err_cnt;
|
|
tmp_stats[i++] = swstats->tpa_err_cnt;
|
|
tmp_stats[i++] = swstats->sm_err_cnt;
|
|
tmp_stats[i++] = swstats->lso_err_cnt;
|
|
tmp_stats[i++] = swstats->mac_tmac_err_cnt;
|
|
tmp_stats[i++] = swstats->mac_rmac_err_cnt;
|
|
tmp_stats[i++] = swstats->xgxs_txgxs_err_cnt;
|
|
tmp_stats[i++] = swstats->xgxs_rxgxs_err_cnt;
|
|
tmp_stats[i++] = swstats->rc_err_cnt;
|
|
tmp_stats[i++] = swstats->prc_pcix_err_cnt;
|
|
tmp_stats[i++] = swstats->rpa_err_cnt;
|
|
tmp_stats[i++] = swstats->rda_err_cnt;
|
|
tmp_stats[i++] = swstats->rti_err_cnt;
|
|
tmp_stats[i++] = swstats->mc_err_cnt;
|
|
}
|
|
|
|
static int s2io_ethtool_get_regs_len(struct net_device *dev)
|
|
{
|
|
return XENA_REG_SPACE;
|
|
}
|
|
|
|
|
|
static u32 s2io_ethtool_get_rx_csum(struct net_device *dev)
|
|
{
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
|
|
return sp->rx_csum;
|
|
}
|
|
|
|
static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
|
|
{
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
|
|
if (data)
|
|
sp->rx_csum = 1;
|
|
else
|
|
sp->rx_csum = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s2io_get_eeprom_len(struct net_device *dev)
|
|
{
|
|
return XENA_EEPROM_SPACE;
|
|
}
|
|
|
|
static int s2io_get_sset_count(struct net_device *dev, int sset)
|
|
{
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
|
|
switch (sset) {
|
|
case ETH_SS_TEST:
|
|
return S2IO_TEST_LEN;
|
|
case ETH_SS_STATS:
|
|
switch (sp->device_type) {
|
|
case XFRAME_I_DEVICE:
|
|
return XFRAME_I_STAT_LEN;
|
|
case XFRAME_II_DEVICE:
|
|
return XFRAME_II_STAT_LEN;
|
|
default:
|
|
return 0;
|
|
}
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static void s2io_ethtool_get_strings(struct net_device *dev,
|
|
u32 stringset, u8 *data)
|
|
{
|
|
int stat_size = 0;
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
|
|
switch (stringset) {
|
|
case ETH_SS_TEST:
|
|
memcpy(data, s2io_gstrings, S2IO_STRINGS_LEN);
|
|
break;
|
|
case ETH_SS_STATS:
|
|
stat_size = sizeof(ethtool_xena_stats_keys);
|
|
memcpy(data, ðtool_xena_stats_keys, stat_size);
|
|
if (sp->device_type == XFRAME_II_DEVICE) {
|
|
memcpy(data + stat_size,
|
|
ðtool_enhanced_stats_keys,
|
|
sizeof(ethtool_enhanced_stats_keys));
|
|
stat_size += sizeof(ethtool_enhanced_stats_keys);
|
|
}
|
|
|
|
memcpy(data + stat_size, ðtool_driver_stats_keys,
|
|
sizeof(ethtool_driver_stats_keys));
|
|
}
|
|
}
|
|
|
|
static int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
|
|
{
|
|
if (data)
|
|
dev->features |= NETIF_F_IP_CSUM;
|
|
else
|
|
dev->features &= ~NETIF_F_IP_CSUM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 s2io_ethtool_op_get_tso(struct net_device *dev)
|
|
{
|
|
return (dev->features & NETIF_F_TSO) != 0;
|
|
}
|
|
static int s2io_ethtool_op_set_tso(struct net_device *dev, u32 data)
|
|
{
|
|
if (data)
|
|
dev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
|
|
else
|
|
dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct ethtool_ops netdev_ethtool_ops = {
|
|
.get_settings = s2io_ethtool_gset,
|
|
.set_settings = s2io_ethtool_sset,
|
|
.get_drvinfo = s2io_ethtool_gdrvinfo,
|
|
.get_regs_len = s2io_ethtool_get_regs_len,
|
|
.get_regs = s2io_ethtool_gregs,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_eeprom_len = s2io_get_eeprom_len,
|
|
.get_eeprom = s2io_ethtool_geeprom,
|
|
.set_eeprom = s2io_ethtool_seeprom,
|
|
.get_ringparam = s2io_ethtool_gringparam,
|
|
.get_pauseparam = s2io_ethtool_getpause_data,
|
|
.set_pauseparam = s2io_ethtool_setpause_data,
|
|
.get_rx_csum = s2io_ethtool_get_rx_csum,
|
|
.set_rx_csum = s2io_ethtool_set_rx_csum,
|
|
.set_tx_csum = s2io_ethtool_op_set_tx_csum,
|
|
.set_sg = ethtool_op_set_sg,
|
|
.get_tso = s2io_ethtool_op_get_tso,
|
|
.set_tso = s2io_ethtool_op_set_tso,
|
|
.set_ufo = ethtool_op_set_ufo,
|
|
.self_test = s2io_ethtool_test,
|
|
.get_strings = s2io_ethtool_get_strings,
|
|
.phys_id = s2io_ethtool_idnic,
|
|
.get_ethtool_stats = s2io_get_ethtool_stats,
|
|
.get_sset_count = s2io_get_sset_count,
|
|
};
|
|
|
|
/**
|
|
* s2io_ioctl - Entry point for the Ioctl
|
|
* @dev : Device pointer.
|
|
* @ifr : An IOCTL specefic structure, that can contain a pointer to
|
|
* a proprietary structure used to pass information to the driver.
|
|
* @cmd : This is used to distinguish between the different commands that
|
|
* can be passed to the IOCTL functions.
|
|
* Description:
|
|
* Currently there are no special functionality supported in IOCTL, hence
|
|
* function always return EOPNOTSUPPORTED
|
|
*/
|
|
|
|
static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
/**
|
|
* s2io_change_mtu - entry point to change MTU size for the device.
|
|
* @dev : device pointer.
|
|
* @new_mtu : the new MTU size for the device.
|
|
* Description: A driver entry point to change MTU size for the device.
|
|
* Before changing the MTU the device must be stopped.
|
|
* Return value:
|
|
* 0 on success and an appropriate (-)ve integer as defined in errno.h
|
|
* file on failure.
|
|
*/
|
|
|
|
static int s2io_change_mtu(struct net_device *dev, int new_mtu)
|
|
{
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
int ret = 0;
|
|
|
|
if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) {
|
|
DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n", dev->name);
|
|
return -EPERM;
|
|
}
|
|
|
|
dev->mtu = new_mtu;
|
|
if (netif_running(dev)) {
|
|
s2io_stop_all_tx_queue(sp);
|
|
s2io_card_down(sp);
|
|
ret = s2io_card_up(sp);
|
|
if (ret) {
|
|
DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
|
|
__func__);
|
|
return ret;
|
|
}
|
|
s2io_wake_all_tx_queue(sp);
|
|
} else { /* Device is down */
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
u64 val64 = new_mtu;
|
|
|
|
writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* s2io_set_link - Set the LInk status
|
|
* @data: long pointer to device private structue
|
|
* Description: Sets the link status for the adapter
|
|
*/
|
|
|
|
static void s2io_set_link(struct work_struct *work)
|
|
{
|
|
struct s2io_nic *nic = container_of(work, struct s2io_nic,
|
|
set_link_task);
|
|
struct net_device *dev = nic->dev;
|
|
struct XENA_dev_config __iomem *bar0 = nic->bar0;
|
|
register u64 val64;
|
|
u16 subid;
|
|
|
|
rtnl_lock();
|
|
|
|
if (!netif_running(dev))
|
|
goto out_unlock;
|
|
|
|
if (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(nic->state))) {
|
|
/* The card is being reset, no point doing anything */
|
|
goto out_unlock;
|
|
}
|
|
|
|
subid = nic->pdev->subsystem_device;
|
|
if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
|
|
/*
|
|
* Allow a small delay for the NICs self initiated
|
|
* cleanup to complete.
|
|
*/
|
|
msleep(100);
|
|
}
|
|
|
|
val64 = readq(&bar0->adapter_status);
|
|
if (LINK_IS_UP(val64)) {
|
|
if (!(readq(&bar0->adapter_control) & ADAPTER_CNTL_EN)) {
|
|
if (verify_xena_quiescence(nic)) {
|
|
val64 = readq(&bar0->adapter_control);
|
|
val64 |= ADAPTER_CNTL_EN;
|
|
writeq(val64, &bar0->adapter_control);
|
|
if (CARDS_WITH_FAULTY_LINK_INDICATORS(
|
|
nic->device_type, subid)) {
|
|
val64 = readq(&bar0->gpio_control);
|
|
val64 |= GPIO_CTRL_GPIO_0;
|
|
writeq(val64, &bar0->gpio_control);
|
|
val64 = readq(&bar0->gpio_control);
|
|
} else {
|
|
val64 |= ADAPTER_LED_ON;
|
|
writeq(val64, &bar0->adapter_control);
|
|
}
|
|
nic->device_enabled_once = true;
|
|
} else {
|
|
DBG_PRINT(ERR_DBG,
|
|
"%s: Error: device is not Quiescent\n",
|
|
dev->name);
|
|
s2io_stop_all_tx_queue(nic);
|
|
}
|
|
}
|
|
val64 = readq(&bar0->adapter_control);
|
|
val64 |= ADAPTER_LED_ON;
|
|
writeq(val64, &bar0->adapter_control);
|
|
s2io_link(nic, LINK_UP);
|
|
} else {
|
|
if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
|
|
subid)) {
|
|
val64 = readq(&bar0->gpio_control);
|
|
val64 &= ~GPIO_CTRL_GPIO_0;
|
|
writeq(val64, &bar0->gpio_control);
|
|
val64 = readq(&bar0->gpio_control);
|
|
}
|
|
/* turn off LED */
|
|
val64 = readq(&bar0->adapter_control);
|
|
val64 = val64 & (~ADAPTER_LED_ON);
|
|
writeq(val64, &bar0->adapter_control);
|
|
s2io_link(nic, LINK_DOWN);
|
|
}
|
|
clear_bit(__S2IO_STATE_LINK_TASK, &(nic->state));
|
|
|
|
out_unlock:
|
|
rtnl_unlock();
|
|
}
|
|
|
|
static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
|
|
struct buffAdd *ba,
|
|
struct sk_buff **skb, u64 *temp0, u64 *temp1,
|
|
u64 *temp2, int size)
|
|
{
|
|
struct net_device *dev = sp->dev;
|
|
struct swStat *stats = &sp->mac_control.stats_info->sw_stat;
|
|
|
|
if ((sp->rxd_mode == RXD_MODE_1) && (rxdp->Host_Control == 0)) {
|
|
struct RxD1 *rxdp1 = (struct RxD1 *)rxdp;
|
|
/* allocate skb */
|
|
if (*skb) {
|
|
DBG_PRINT(INFO_DBG, "SKB is not NULL\n");
|
|
/*
|
|
* As Rx frame are not going to be processed,
|
|
* using same mapped address for the Rxd
|
|
* buffer pointer
|
|
*/
|
|
rxdp1->Buffer0_ptr = *temp0;
|
|
} else {
|
|
*skb = dev_alloc_skb(size);
|
|
if (!(*skb)) {
|
|
DBG_PRINT(INFO_DBG,
|
|
"%s: Out of memory to allocate %s\n",
|
|
dev->name, "1 buf mode SKBs");
|
|
stats->mem_alloc_fail_cnt++;
|
|
return -ENOMEM ;
|
|
}
|
|
stats->mem_allocated += (*skb)->truesize;
|
|
/* storing the mapped addr in a temp variable
|
|
* such it will be used for next rxd whose
|
|
* Host Control is NULL
|
|
*/
|
|
rxdp1->Buffer0_ptr = *temp0 =
|
|
pci_map_single(sp->pdev, (*skb)->data,
|
|
size - NET_IP_ALIGN,
|
|
PCI_DMA_FROMDEVICE);
|
|
if (pci_dma_mapping_error(sp->pdev, rxdp1->Buffer0_ptr))
|
|
goto memalloc_failed;
|
|
rxdp->Host_Control = (unsigned long) (*skb);
|
|
}
|
|
} else if ((sp->rxd_mode == RXD_MODE_3B) && (rxdp->Host_Control == 0)) {
|
|
struct RxD3 *rxdp3 = (struct RxD3 *)rxdp;
|
|
/* Two buffer Mode */
|
|
if (*skb) {
|
|
rxdp3->Buffer2_ptr = *temp2;
|
|
rxdp3->Buffer0_ptr = *temp0;
|
|
rxdp3->Buffer1_ptr = *temp1;
|
|
} else {
|
|
*skb = dev_alloc_skb(size);
|
|
if (!(*skb)) {
|
|
DBG_PRINT(INFO_DBG,
|
|
"%s: Out of memory to allocate %s\n",
|
|
dev->name,
|
|
"2 buf mode SKBs");
|
|
stats->mem_alloc_fail_cnt++;
|
|
return -ENOMEM;
|
|
}
|
|
stats->mem_allocated += (*skb)->truesize;
|
|
rxdp3->Buffer2_ptr = *temp2 =
|
|
pci_map_single(sp->pdev, (*skb)->data,
|
|
dev->mtu + 4,
|
|
PCI_DMA_FROMDEVICE);
|
|
if (pci_dma_mapping_error(sp->pdev, rxdp3->Buffer2_ptr))
|
|
goto memalloc_failed;
|
|
rxdp3->Buffer0_ptr = *temp0 =
|
|
pci_map_single(sp->pdev, ba->ba_0, BUF0_LEN,
|
|
PCI_DMA_FROMDEVICE);
|
|
if (pci_dma_mapping_error(sp->pdev,
|
|
rxdp3->Buffer0_ptr)) {
|
|
pci_unmap_single(sp->pdev,
|
|
(dma_addr_t)rxdp3->Buffer2_ptr,
|
|
dev->mtu + 4,
|
|
PCI_DMA_FROMDEVICE);
|
|
goto memalloc_failed;
|
|
}
|
|
rxdp->Host_Control = (unsigned long) (*skb);
|
|
|
|
/* Buffer-1 will be dummy buffer not used */
|
|
rxdp3->Buffer1_ptr = *temp1 =
|
|
pci_map_single(sp->pdev, ba->ba_1, BUF1_LEN,
|
|
PCI_DMA_FROMDEVICE);
|
|
if (pci_dma_mapping_error(sp->pdev,
|
|
rxdp3->Buffer1_ptr)) {
|
|
pci_unmap_single(sp->pdev,
|
|
(dma_addr_t)rxdp3->Buffer0_ptr,
|
|
BUF0_LEN, PCI_DMA_FROMDEVICE);
|
|
pci_unmap_single(sp->pdev,
|
|
(dma_addr_t)rxdp3->Buffer2_ptr,
|
|
dev->mtu + 4,
|
|
PCI_DMA_FROMDEVICE);
|
|
goto memalloc_failed;
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
memalloc_failed:
|
|
stats->pci_map_fail_cnt++;
|
|
stats->mem_freed += (*skb)->truesize;
|
|
dev_kfree_skb(*skb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void set_rxd_buffer_size(struct s2io_nic *sp, struct RxD_t *rxdp,
|
|
int size)
|
|
{
|
|
struct net_device *dev = sp->dev;
|
|
if (sp->rxd_mode == RXD_MODE_1) {
|
|
rxdp->Control_2 = SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
|
|
} else if (sp->rxd_mode == RXD_MODE_3B) {
|
|
rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
|
|
rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
|
|
rxdp->Control_2 |= SET_BUFFER2_SIZE_3(dev->mtu + 4);
|
|
}
|
|
}
|
|
|
|
static int rxd_owner_bit_reset(struct s2io_nic *sp)
|
|
{
|
|
int i, j, k, blk_cnt = 0, size;
|
|
struct config_param *config = &sp->config;
|
|
struct mac_info *mac_control = &sp->mac_control;
|
|
struct net_device *dev = sp->dev;
|
|
struct RxD_t *rxdp = NULL;
|
|
struct sk_buff *skb = NULL;
|
|
struct buffAdd *ba = NULL;
|
|
u64 temp0_64 = 0, temp1_64 = 0, temp2_64 = 0;
|
|
|
|
/* Calculate the size based on ring mode */
|
|
size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
|
|
HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
|
|
if (sp->rxd_mode == RXD_MODE_1)
|
|
size += NET_IP_ALIGN;
|
|
else if (sp->rxd_mode == RXD_MODE_3B)
|
|
size = dev->mtu + ALIGN_SIZE + BUF0_LEN + 4;
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
|
|
struct ring_info *ring = &mac_control->rings[i];
|
|
|
|
blk_cnt = rx_cfg->num_rxd / (rxd_count[sp->rxd_mode] + 1);
|
|
|
|
for (j = 0; j < blk_cnt; j++) {
|
|
for (k = 0; k < rxd_count[sp->rxd_mode]; k++) {
|
|
rxdp = ring->rx_blocks[j].rxds[k].virt_addr;
|
|
if (sp->rxd_mode == RXD_MODE_3B)
|
|
ba = &ring->ba[j][k];
|
|
if (set_rxd_buffer_pointer(sp, rxdp, ba, &skb,
|
|
(u64 *)&temp0_64,
|
|
(u64 *)&temp1_64,
|
|
(u64 *)&temp2_64,
|
|
size) == -ENOMEM) {
|
|
return 0;
|
|
}
|
|
|
|
set_rxd_buffer_size(sp, rxdp, size);
|
|
wmb();
|
|
/* flip the Ownership bit to Hardware */
|
|
rxdp->Control_1 |= RXD_OWN_XENA;
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
}
|
|
|
|
static int s2io_add_isr(struct s2io_nic *sp)
|
|
{
|
|
int ret = 0;
|
|
struct net_device *dev = sp->dev;
|
|
int err = 0;
|
|
|
|
if (sp->config.intr_type == MSI_X)
|
|
ret = s2io_enable_msi_x(sp);
|
|
if (ret) {
|
|
DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
|
|
sp->config.intr_type = INTA;
|
|
}
|
|
|
|
/*
|
|
* Store the values of the MSIX table in
|
|
* the struct s2io_nic structure
|
|
*/
|
|
store_xmsi_data(sp);
|
|
|
|
/* After proper initialization of H/W, register ISR */
|
|
if (sp->config.intr_type == MSI_X) {
|
|
int i, msix_rx_cnt = 0;
|
|
|
|
for (i = 0; i < sp->num_entries; i++) {
|
|
if (sp->s2io_entries[i].in_use == MSIX_FLG) {
|
|
if (sp->s2io_entries[i].type ==
|
|
MSIX_RING_TYPE) {
|
|
sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
|
|
dev->name, i);
|
|
err = request_irq(sp->entries[i].vector,
|
|
s2io_msix_ring_handle,
|
|
0,
|
|
sp->desc[i],
|
|
sp->s2io_entries[i].arg);
|
|
} else if (sp->s2io_entries[i].type ==
|
|
MSIX_ALARM_TYPE) {
|
|
sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
|
|
dev->name, i);
|
|
err = request_irq(sp->entries[i].vector,
|
|
s2io_msix_fifo_handle,
|
|
0,
|
|
sp->desc[i],
|
|
sp->s2io_entries[i].arg);
|
|
|
|
}
|
|
/* if either data or addr is zero print it. */
|
|
if (!(sp->msix_info[i].addr &&
|
|
sp->msix_info[i].data)) {
|
|
DBG_PRINT(ERR_DBG,
|
|
"%s @Addr:0x%llx Data:0x%llx\n",
|
|
sp->desc[i],
|
|
(unsigned long long)
|
|
sp->msix_info[i].addr,
|
|
(unsigned long long)
|
|
ntohl(sp->msix_info[i].data));
|
|
} else
|
|
msix_rx_cnt++;
|
|
if (err) {
|
|
remove_msix_isr(sp);
|
|
|
|
DBG_PRINT(ERR_DBG,
|
|
"%s:MSI-X-%d registration "
|
|
"failed\n", dev->name, i);
|
|
|
|
DBG_PRINT(ERR_DBG,
|
|
"%s: Defaulting to INTA\n",
|
|
dev->name);
|
|
sp->config.intr_type = INTA;
|
|
break;
|
|
}
|
|
sp->s2io_entries[i].in_use =
|
|
MSIX_REGISTERED_SUCCESS;
|
|
}
|
|
}
|
|
if (!err) {
|
|
pr_info("MSI-X-RX %d entries enabled\n", --msix_rx_cnt);
|
|
DBG_PRINT(INFO_DBG,
|
|
"MSI-X-TX entries enabled through alarm vector\n");
|
|
}
|
|
}
|
|
if (sp->config.intr_type == INTA) {
|
|
err = request_irq((int)sp->pdev->irq, s2io_isr, IRQF_SHARED,
|
|
sp->name, dev);
|
|
if (err) {
|
|
DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
|
|
dev->name);
|
|
return -1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void s2io_rem_isr(struct s2io_nic *sp)
|
|
{
|
|
if (sp->config.intr_type == MSI_X)
|
|
remove_msix_isr(sp);
|
|
else
|
|
remove_inta_isr(sp);
|
|
}
|
|
|
|
static void do_s2io_card_down(struct s2io_nic *sp, int do_io)
|
|
{
|
|
int cnt = 0;
|
|
struct XENA_dev_config __iomem *bar0 = sp->bar0;
|
|
register u64 val64 = 0;
|
|
struct config_param *config;
|
|
config = &sp->config;
|
|
|
|
if (!is_s2io_card_up(sp))
|
|
return;
|
|
|
|
del_timer_sync(&sp->alarm_timer);
|
|
/* If s2io_set_link task is executing, wait till it completes. */
|
|
while (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(sp->state)))
|
|
msleep(50);
|
|
clear_bit(__S2IO_STATE_CARD_UP, &sp->state);
|
|
|
|
/* Disable napi */
|
|
if (sp->config.napi) {
|
|
int off = 0;
|
|
if (config->intr_type == MSI_X) {
|
|
for (; off < sp->config.rx_ring_num; off++)
|
|
napi_disable(&sp->mac_control.rings[off].napi);
|
|
}
|
|
else
|
|
napi_disable(&sp->napi);
|
|
}
|
|
|
|
/* disable Tx and Rx traffic on the NIC */
|
|
if (do_io)
|
|
stop_nic(sp);
|
|
|
|
s2io_rem_isr(sp);
|
|
|
|
/* stop the tx queue, indicate link down */
|
|
s2io_link(sp, LINK_DOWN);
|
|
|
|
/* Check if the device is Quiescent and then Reset the NIC */
|
|
while (do_io) {
|
|
/* As per the HW requirement we need to replenish the
|
|
* receive buffer to avoid the ring bump. Since there is
|
|
* no intention of processing the Rx frame at this pointwe are
|
|
* just settting the ownership bit of rxd in Each Rx
|
|
* ring to HW and set the appropriate buffer size
|
|
* based on the ring mode
|
|
*/
|
|
rxd_owner_bit_reset(sp);
|
|
|
|
val64 = readq(&bar0->adapter_status);
|
|
if (verify_xena_quiescence(sp)) {
|
|
if (verify_pcc_quiescent(sp, sp->device_enabled_once))
|
|
break;
|
|
}
|
|
|
|
msleep(50);
|
|
cnt++;
|
|
if (cnt == 10) {
|
|
DBG_PRINT(ERR_DBG, "Device not Quiescent - "
|
|
"adapter status reads 0x%llx\n",
|
|
(unsigned long long)val64);
|
|
break;
|
|
}
|
|
}
|
|
if (do_io)
|
|
s2io_reset(sp);
|
|
|
|
/* Free all Tx buffers */
|
|
free_tx_buffers(sp);
|
|
|
|
/* Free all Rx buffers */
|
|
free_rx_buffers(sp);
|
|
|
|
clear_bit(__S2IO_STATE_LINK_TASK, &(sp->state));
|
|
}
|
|
|
|
static void s2io_card_down(struct s2io_nic *sp)
|
|
{
|
|
do_s2io_card_down(sp, 1);
|
|
}
|
|
|
|
static int s2io_card_up(struct s2io_nic *sp)
|
|
{
|
|
int i, ret = 0;
|
|
struct config_param *config;
|
|
struct mac_info *mac_control;
|
|
struct net_device *dev = (struct net_device *)sp->dev;
|
|
u16 interruptible;
|
|
|
|
/* Initialize the H/W I/O registers */
|
|
ret = init_nic(sp);
|
|
if (ret != 0) {
|
|
DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
|
|
dev->name);
|
|
if (ret != -EIO)
|
|
s2io_reset(sp);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Initializing the Rx buffers. For now we are considering only 1
|
|
* Rx ring and initializing buffers into 30 Rx blocks
|
|
*/
|
|
config = &sp->config;
|
|
mac_control = &sp->mac_control;
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
struct ring_info *ring = &mac_control->rings[i];
|
|
|
|
ring->mtu = dev->mtu;
|
|
ret = fill_rx_buffers(sp, ring, 1);
|
|
if (ret) {
|
|
DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",
|
|
dev->name);
|
|
s2io_reset(sp);
|
|
free_rx_buffers(sp);
|
|
return -ENOMEM;
|
|
}
|
|
DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i,
|
|
ring->rx_bufs_left);
|
|
}
|
|
|
|
/* Initialise napi */
|
|
if (config->napi) {
|
|
if (config->intr_type == MSI_X) {
|
|
for (i = 0; i < sp->config.rx_ring_num; i++)
|
|
napi_enable(&sp->mac_control.rings[i].napi);
|
|
} else {
|
|
napi_enable(&sp->napi);
|
|
}
|
|
}
|
|
|
|
/* Maintain the state prior to the open */
|
|
if (sp->promisc_flg)
|
|
sp->promisc_flg = 0;
|
|
if (sp->m_cast_flg) {
|
|
sp->m_cast_flg = 0;
|
|
sp->all_multi_pos = 0;
|
|
}
|
|
|
|
/* Setting its receive mode */
|
|
s2io_set_multicast(dev);
|
|
|
|
if (sp->lro) {
|
|
/* Initialize max aggregatable pkts per session based on MTU */
|
|
sp->lro_max_aggr_per_sess = ((1<<16) - 1) / dev->mtu;
|
|
/* Check if we can use (if specified) user provided value */
|
|
if (lro_max_pkts < sp->lro_max_aggr_per_sess)
|
|
sp->lro_max_aggr_per_sess = lro_max_pkts;
|
|
}
|
|
|
|
/* Enable Rx Traffic and interrupts on the NIC */
|
|
if (start_nic(sp)) {
|
|
DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
|
|
s2io_reset(sp);
|
|
free_rx_buffers(sp);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Add interrupt service routine */
|
|
if (s2io_add_isr(sp) != 0) {
|
|
if (sp->config.intr_type == MSI_X)
|
|
s2io_rem_isr(sp);
|
|
s2io_reset(sp);
|
|
free_rx_buffers(sp);
|
|
return -ENODEV;
|
|
}
|
|
|
|
S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
|
|
|
|
set_bit(__S2IO_STATE_CARD_UP, &sp->state);
|
|
|
|
/* Enable select interrupts */
|
|
en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS);
|
|
if (sp->config.intr_type != INTA) {
|
|
interruptible = TX_TRAFFIC_INTR | TX_PIC_INTR;
|
|
en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS);
|
|
} else {
|
|
interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
|
|
interruptible |= TX_PIC_INTR;
|
|
en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* s2io_restart_nic - Resets the NIC.
|
|
* @data : long pointer to the device private structure
|
|
* Description:
|
|
* This function is scheduled to be run by the s2io_tx_watchdog
|
|
* function after 0.5 secs to reset the NIC. The idea is to reduce
|
|
* the run time of the watch dog routine which is run holding a
|
|
* spin lock.
|
|
*/
|
|
|
|
static void s2io_restart_nic(struct work_struct *work)
|
|
{
|
|
struct s2io_nic *sp = container_of(work, struct s2io_nic, rst_timer_task);
|
|
struct net_device *dev = sp->dev;
|
|
|
|
rtnl_lock();
|
|
|
|
if (!netif_running(dev))
|
|
goto out_unlock;
|
|
|
|
s2io_card_down(sp);
|
|
if (s2io_card_up(sp)) {
|
|
DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", dev->name);
|
|
}
|
|
s2io_wake_all_tx_queue(sp);
|
|
DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name);
|
|
out_unlock:
|
|
rtnl_unlock();
|
|
}
|
|
|
|
/**
|
|
* s2io_tx_watchdog - Watchdog for transmit side.
|
|
* @dev : Pointer to net device structure
|
|
* Description:
|
|
* This function is triggered if the Tx Queue is stopped
|
|
* for a pre-defined amount of time when the Interface is still up.
|
|
* If the Interface is jammed in such a situation, the hardware is
|
|
* reset (by s2io_close) and restarted again (by s2io_open) to
|
|
* overcome any problem that might have been caused in the hardware.
|
|
* Return value:
|
|
* void
|
|
*/
|
|
|
|
static void s2io_tx_watchdog(struct net_device *dev)
|
|
{
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
|
|
|
|
if (netif_carrier_ok(dev)) {
|
|
swstats->watchdog_timer_cnt++;
|
|
schedule_work(&sp->rst_timer_task);
|
|
swstats->soft_reset_cnt++;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* rx_osm_handler - To perform some OS related operations on SKB.
|
|
* @sp: private member of the device structure,pointer to s2io_nic structure.
|
|
* @skb : the socket buffer pointer.
|
|
* @len : length of the packet
|
|
* @cksum : FCS checksum of the frame.
|
|
* @ring_no : the ring from which this RxD was extracted.
|
|
* Description:
|
|
* This function is called by the Rx interrupt serivce routine to perform
|
|
* some OS related operations on the SKB before passing it to the upper
|
|
* layers. It mainly checks if the checksum is OK, if so adds it to the
|
|
* SKBs cksum variable, increments the Rx packet count and passes the SKB
|
|
* to the upper layer. If the checksum is wrong, it increments the Rx
|
|
* packet error count, frees the SKB and returns error.
|
|
* Return value:
|
|
* SUCCESS on success and -1 on failure.
|
|
*/
|
|
static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
|
|
{
|
|
struct s2io_nic *sp = ring_data->nic;
|
|
struct net_device *dev = (struct net_device *)ring_data->dev;
|
|
struct sk_buff *skb = (struct sk_buff *)
|
|
((unsigned long)rxdp->Host_Control);
|
|
int ring_no = ring_data->ring_no;
|
|
u16 l3_csum, l4_csum;
|
|
unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
|
|
struct lro *uninitialized_var(lro);
|
|
u8 err_mask;
|
|
struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
|
|
|
|
skb->dev = dev;
|
|
|
|
if (err) {
|
|
/* Check for parity error */
|
|
if (err & 0x1)
|
|
swstats->parity_err_cnt++;
|
|
|
|
err_mask = err >> 48;
|
|
switch (err_mask) {
|
|
case 1:
|
|
swstats->rx_parity_err_cnt++;
|
|
break;
|
|
|
|
case 2:
|
|
swstats->rx_abort_cnt++;
|
|
break;
|
|
|
|
case 3:
|
|
swstats->rx_parity_abort_cnt++;
|
|
break;
|
|
|
|
case 4:
|
|
swstats->rx_rda_fail_cnt++;
|
|
break;
|
|
|
|
case 5:
|
|
swstats->rx_unkn_prot_cnt++;
|
|
break;
|
|
|
|
case 6:
|
|
swstats->rx_fcs_err_cnt++;
|
|
break;
|
|
|
|
case 7:
|
|
swstats->rx_buf_size_err_cnt++;
|
|
break;
|
|
|
|
case 8:
|
|
swstats->rx_rxd_corrupt_cnt++;
|
|
break;
|
|
|
|
case 15:
|
|
swstats->rx_unkn_err_cnt++;
|
|
break;
|
|
}
|
|
/*
|
|
* Drop the packet if bad transfer code. Exception being
|
|
* 0x5, which could be due to unsupported IPv6 extension header.
|
|
* In this case, we let stack handle the packet.
|
|
* Note that in this case, since checksum will be incorrect,
|
|
* stack will validate the same.
|
|
*/
|
|
if (err_mask != 0x5) {
|
|
DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n",
|
|
dev->name, err_mask);
|
|
dev->stats.rx_crc_errors++;
|
|
swstats->mem_freed
|
|
+= skb->truesize;
|
|
dev_kfree_skb(skb);
|
|
ring_data->rx_bufs_left -= 1;
|
|
rxdp->Host_Control = 0;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* Updating statistics */
|
|
ring_data->rx_packets++;
|
|
rxdp->Host_Control = 0;
|
|
if (sp->rxd_mode == RXD_MODE_1) {
|
|
int len = RXD_GET_BUFFER0_SIZE_1(rxdp->Control_2);
|
|
|
|
ring_data->rx_bytes += len;
|
|
skb_put(skb, len);
|
|
|
|
} else if (sp->rxd_mode == RXD_MODE_3B) {
|
|
int get_block = ring_data->rx_curr_get_info.block_index;
|
|
int get_off = ring_data->rx_curr_get_info.offset;
|
|
int buf0_len = RXD_GET_BUFFER0_SIZE_3(rxdp->Control_2);
|
|
int buf2_len = RXD_GET_BUFFER2_SIZE_3(rxdp->Control_2);
|
|
unsigned char *buff = skb_push(skb, buf0_len);
|
|
|
|
struct buffAdd *ba = &ring_data->ba[get_block][get_off];
|
|
ring_data->rx_bytes += buf0_len + buf2_len;
|
|
memcpy(buff, ba->ba_0, buf0_len);
|
|
skb_put(skb, buf2_len);
|
|
}
|
|
|
|
if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) &&
|
|
((!ring_data->lro) ||
|
|
(ring_data->lro && (!(rxdp->Control_1 & RXD_FRAME_IP_FRAG)))) &&
|
|
(sp->rx_csum)) {
|
|
l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
|
|
l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
|
|
if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) {
|
|
/*
|
|
* NIC verifies if the Checksum of the received
|
|
* frame is Ok or not and accordingly returns
|
|
* a flag in the RxD.
|
|
*/
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
if (ring_data->lro) {
|
|
u32 tcp_len;
|
|
u8 *tcp;
|
|
int ret = 0;
|
|
|
|
ret = s2io_club_tcp_session(ring_data,
|
|
skb->data, &tcp,
|
|
&tcp_len, &lro,
|
|
rxdp, sp);
|
|
switch (ret) {
|
|
case 3: /* Begin anew */
|
|
lro->parent = skb;
|
|
goto aggregate;
|
|
case 1: /* Aggregate */
|
|
lro_append_pkt(sp, lro, skb, tcp_len);
|
|
goto aggregate;
|
|
case 4: /* Flush session */
|
|
lro_append_pkt(sp, lro, skb, tcp_len);
|
|
queue_rx_frame(lro->parent,
|
|
lro->vlan_tag);
|
|
clear_lro_session(lro);
|
|
swstats->flush_max_pkts++;
|
|
goto aggregate;
|
|
case 2: /* Flush both */
|
|
lro->parent->data_len = lro->frags_len;
|
|
swstats->sending_both++;
|
|
queue_rx_frame(lro->parent,
|
|
lro->vlan_tag);
|
|
clear_lro_session(lro);
|
|
goto send_up;
|
|
case 0: /* sessions exceeded */
|
|
case -1: /* non-TCP or not L2 aggregatable */
|
|
case 5: /*
|
|
* First pkt in session not
|
|
* L3/L4 aggregatable
|
|
*/
|
|
break;
|
|
default:
|
|
DBG_PRINT(ERR_DBG,
|
|
"%s: Samadhana!!\n",
|
|
__func__);
|
|
BUG();
|
|
}
|
|
}
|
|
} else {
|
|
/*
|
|
* Packet with erroneous checksum, let the
|
|
* upper layers deal with it.
|
|
*/
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
}
|
|
} else
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
|
|
swstats->mem_freed += skb->truesize;
|
|
send_up:
|
|
skb_record_rx_queue(skb, ring_no);
|
|
queue_rx_frame(skb, RXD_GET_VLAN_TAG(rxdp->Control_2));
|
|
aggregate:
|
|
sp->mac_control.rings[ring_no].rx_bufs_left -= 1;
|
|
return SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* s2io_link - stops/starts the Tx queue.
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
* s2io_nic structure.
|
|
* @link : inidicates whether link is UP/DOWN.
|
|
* Description:
|
|
* This function stops/starts the Tx queue depending on whether the link
|
|
* status of the NIC is is down or up. This is called by the Alarm
|
|
* interrupt handler whenever a link change interrupt comes up.
|
|
* Return value:
|
|
* void.
|
|
*/
|
|
|
|
static void s2io_link(struct s2io_nic *sp, int link)
|
|
{
|
|
struct net_device *dev = (struct net_device *)sp->dev;
|
|
struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
|
|
|
|
if (link != sp->last_link_state) {
|
|
init_tti(sp, link);
|
|
if (link == LINK_DOWN) {
|
|
DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);
|
|
s2io_stop_all_tx_queue(sp);
|
|
netif_carrier_off(dev);
|
|
if (swstats->link_up_cnt)
|
|
swstats->link_up_time =
|
|
jiffies - sp->start_time;
|
|
swstats->link_down_cnt++;
|
|
} else {
|
|
DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);
|
|
if (swstats->link_down_cnt)
|
|
swstats->link_down_time =
|
|
jiffies - sp->start_time;
|
|
swstats->link_up_cnt++;
|
|
netif_carrier_on(dev);
|
|
s2io_wake_all_tx_queue(sp);
|
|
}
|
|
}
|
|
sp->last_link_state = link;
|
|
sp->start_time = jiffies;
|
|
}
|
|
|
|
/**
|
|
* s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
* s2io_nic structure.
|
|
* Description:
|
|
* This function initializes a few of the PCI and PCI-X configuration registers
|
|
* with recommended values.
|
|
* Return value:
|
|
* void
|
|
*/
|
|
|
|
static void s2io_init_pci(struct s2io_nic *sp)
|
|
{
|
|
u16 pci_cmd = 0, pcix_cmd = 0;
|
|
|
|
/* Enable Data Parity Error Recovery in PCI-X command register. */
|
|
pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
|
|
&(pcix_cmd));
|
|
pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
|
|
(pcix_cmd | 1));
|
|
pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
|
|
&(pcix_cmd));
|
|
|
|
/* Set the PErr Response bit in PCI command register. */
|
|
pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
|
|
pci_write_config_word(sp->pdev, PCI_COMMAND,
|
|
(pci_cmd | PCI_COMMAND_PARITY));
|
|
pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
|
|
}
|
|
|
|
static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
|
|
u8 *dev_multiq)
|
|
{
|
|
if ((tx_fifo_num > MAX_TX_FIFOS) || (tx_fifo_num < 1)) {
|
|
DBG_PRINT(ERR_DBG, "Requested number of tx fifos "
|
|
"(%d) not supported\n", tx_fifo_num);
|
|
|
|
if (tx_fifo_num < 1)
|
|
tx_fifo_num = 1;
|
|
else
|
|
tx_fifo_num = MAX_TX_FIFOS;
|
|
|
|
DBG_PRINT(ERR_DBG, "Default to %d tx fifos\n", tx_fifo_num);
|
|
}
|
|
|
|
if (multiq)
|
|
*dev_multiq = multiq;
|
|
|
|
if (tx_steering_type && (1 == tx_fifo_num)) {
|
|
if (tx_steering_type != TX_DEFAULT_STEERING)
|
|
DBG_PRINT(ERR_DBG,
|
|
"Tx steering is not supported with "
|
|
"one fifo. Disabling Tx steering.\n");
|
|
tx_steering_type = NO_STEERING;
|
|
}
|
|
|
|
if ((tx_steering_type < NO_STEERING) ||
|
|
(tx_steering_type > TX_DEFAULT_STEERING)) {
|
|
DBG_PRINT(ERR_DBG,
|
|
"Requested transmit steering not supported\n");
|
|
DBG_PRINT(ERR_DBG, "Disabling transmit steering\n");
|
|
tx_steering_type = NO_STEERING;
|
|
}
|
|
|
|
if (rx_ring_num > MAX_RX_RINGS) {
|
|
DBG_PRINT(ERR_DBG,
|
|
"Requested number of rx rings not supported\n");
|
|
DBG_PRINT(ERR_DBG, "Default to %d rx rings\n",
|
|
MAX_RX_RINGS);
|
|
rx_ring_num = MAX_RX_RINGS;
|
|
}
|
|
|
|
if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) {
|
|
DBG_PRINT(ERR_DBG, "Wrong intr_type requested. "
|
|
"Defaulting to INTA\n");
|
|
*dev_intr_type = INTA;
|
|
}
|
|
|
|
if ((*dev_intr_type == MSI_X) &&
|
|
((pdev->device != PCI_DEVICE_ID_HERC_WIN) &&
|
|
(pdev->device != PCI_DEVICE_ID_HERC_UNI))) {
|
|
DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. "
|
|
"Defaulting to INTA\n");
|
|
*dev_intr_type = INTA;
|
|
}
|
|
|
|
if ((rx_ring_mode != 1) && (rx_ring_mode != 2)) {
|
|
DBG_PRINT(ERR_DBG, "Requested ring mode not supported\n");
|
|
DBG_PRINT(ERR_DBG, "Defaulting to 1-buffer mode\n");
|
|
rx_ring_mode = 1;
|
|
}
|
|
return SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* rts_ds_steer - Receive traffic steering based on IPv4 or IPv6 TOS
|
|
* or Traffic class respectively.
|
|
* @nic: device private variable
|
|
* Description: The function configures the receive steering to
|
|
* desired receive ring.
|
|
* Return Value: SUCCESS on success and
|
|
* '-1' on failure (endian settings incorrect).
|
|
*/
|
|
static int rts_ds_steer(struct s2io_nic *nic, u8 ds_codepoint, u8 ring)
|
|
{
|
|
struct XENA_dev_config __iomem *bar0 = nic->bar0;
|
|
register u64 val64 = 0;
|
|
|
|
if (ds_codepoint > 63)
|
|
return FAILURE;
|
|
|
|
val64 = RTS_DS_MEM_DATA(ring);
|
|
writeq(val64, &bar0->rts_ds_mem_data);
|
|
|
|
val64 = RTS_DS_MEM_CTRL_WE |
|
|
RTS_DS_MEM_CTRL_STROBE_NEW_CMD |
|
|
RTS_DS_MEM_CTRL_OFFSET(ds_codepoint);
|
|
|
|
writeq(val64, &bar0->rts_ds_mem_ctrl);
|
|
|
|
return wait_for_cmd_complete(&bar0->rts_ds_mem_ctrl,
|
|
RTS_DS_MEM_CTRL_STROBE_CMD_BEING_EXECUTED,
|
|
S2IO_BIT_RESET);
|
|
}
|
|
|
|
static const struct net_device_ops s2io_netdev_ops = {
|
|
.ndo_open = s2io_open,
|
|
.ndo_stop = s2io_close,
|
|
.ndo_get_stats = s2io_get_stats,
|
|
.ndo_start_xmit = s2io_xmit,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_multicast_list = s2io_set_multicast,
|
|
.ndo_do_ioctl = s2io_ioctl,
|
|
.ndo_set_mac_address = s2io_set_mac_addr,
|
|
.ndo_change_mtu = s2io_change_mtu,
|
|
.ndo_vlan_rx_register = s2io_vlan_rx_register,
|
|
.ndo_vlan_rx_kill_vid = s2io_vlan_rx_kill_vid,
|
|
.ndo_tx_timeout = s2io_tx_watchdog,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = s2io_netpoll,
|
|
#endif
|
|
};
|
|
|
|
/**
|
|
* s2io_init_nic - Initialization of the adapter .
|
|
* @pdev : structure containing the PCI related information of the device.
|
|
* @pre: List of PCI devices supported by the driver listed in s2io_tbl.
|
|
* Description:
|
|
* The function initializes an adapter identified by the pci_dec structure.
|
|
* All OS related initialization including memory and device structure and
|
|
* initlaization of the device private variable is done. Also the swapper
|
|
* control register is initialized to enable read and write into the I/O
|
|
* registers of the device.
|
|
* Return value:
|
|
* returns 0 on success and negative on failure.
|
|
*/
|
|
|
|
static int __devinit
|
|
s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
|
|
{
|
|
struct s2io_nic *sp;
|
|
struct net_device *dev;
|
|
int i, j, ret;
|
|
int dma_flag = false;
|
|
u32 mac_up, mac_down;
|
|
u64 val64 = 0, tmp64 = 0;
|
|
struct XENA_dev_config __iomem *bar0 = NULL;
|
|
u16 subid;
|
|
struct config_param *config;
|
|
struct mac_info *mac_control;
|
|
int mode;
|
|
u8 dev_intr_type = intr_type;
|
|
u8 dev_multiq = 0;
|
|
|
|
ret = s2io_verify_parm(pdev, &dev_intr_type, &dev_multiq);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pci_enable_device(pdev);
|
|
if (ret) {
|
|
DBG_PRINT(ERR_DBG,
|
|
"%s: pci_enable_device failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
|
|
DBG_PRINT(INIT_DBG, "%s: Using 64bit DMA\n", __func__);
|
|
dma_flag = true;
|
|
if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
|
|
DBG_PRINT(ERR_DBG,
|
|
"Unable to obtain 64bit DMA "
|
|
"for consistent allocations\n");
|
|
pci_disable_device(pdev);
|
|
return -ENOMEM;
|
|
}
|
|
} else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
|
|
DBG_PRINT(INIT_DBG, "%s: Using 32bit DMA\n", __func__);
|
|
} else {
|
|
pci_disable_device(pdev);
|
|
return -ENOMEM;
|
|
}
|
|
ret = pci_request_regions(pdev, s2io_driver_name);
|
|
if (ret) {
|
|
DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x\n",
|
|
__func__, ret);
|
|
pci_disable_device(pdev);
|
|
return -ENODEV;
|
|
}
|
|
if (dev_multiq)
|
|
dev = alloc_etherdev_mq(sizeof(struct s2io_nic), tx_fifo_num);
|
|
else
|
|
dev = alloc_etherdev(sizeof(struct s2io_nic));
|
|
if (dev == NULL) {
|
|
DBG_PRINT(ERR_DBG, "Device allocation failed\n");
|
|
pci_disable_device(pdev);
|
|
pci_release_regions(pdev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
pci_set_drvdata(pdev, dev);
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
/* Private member variable initialized to s2io NIC structure */
|
|
sp = netdev_priv(dev);
|
|
memset(sp, 0, sizeof(struct s2io_nic));
|
|
sp->dev = dev;
|
|
sp->pdev = pdev;
|
|
sp->high_dma_flag = dma_flag;
|
|
sp->device_enabled_once = false;
|
|
if (rx_ring_mode == 1)
|
|
sp->rxd_mode = RXD_MODE_1;
|
|
if (rx_ring_mode == 2)
|
|
sp->rxd_mode = RXD_MODE_3B;
|
|
|
|
sp->config.intr_type = dev_intr_type;
|
|
|
|
if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) ||
|
|
(pdev->device == PCI_DEVICE_ID_HERC_UNI))
|
|
sp->device_type = XFRAME_II_DEVICE;
|
|
else
|
|
sp->device_type = XFRAME_I_DEVICE;
|
|
|
|
sp->lro = lro_enable;
|
|
|
|
/* Initialize some PCI/PCI-X fields of the NIC. */
|
|
s2io_init_pci(sp);
|
|
|
|
/*
|
|
* Setting the device configuration parameters.
|
|
* Most of these parameters can be specified by the user during
|
|
* module insertion as they are module loadable parameters. If
|
|
* these parameters are not not specified during load time, they
|
|
* are initialized with default values.
|
|
*/
|
|
config = &sp->config;
|
|
mac_control = &sp->mac_control;
|
|
|
|
config->napi = napi;
|
|
config->tx_steering_type = tx_steering_type;
|
|
|
|
/* Tx side parameters. */
|
|
if (config->tx_steering_type == TX_PRIORITY_STEERING)
|
|
config->tx_fifo_num = MAX_TX_FIFOS;
|
|
else
|
|
config->tx_fifo_num = tx_fifo_num;
|
|
|
|
/* Initialize the fifos used for tx steering */
|
|
if (config->tx_fifo_num < 5) {
|
|
if (config->tx_fifo_num == 1)
|
|
sp->total_tcp_fifos = 1;
|
|
else
|
|
sp->total_tcp_fifos = config->tx_fifo_num - 1;
|
|
sp->udp_fifo_idx = config->tx_fifo_num - 1;
|
|
sp->total_udp_fifos = 1;
|
|
sp->other_fifo_idx = sp->total_tcp_fifos - 1;
|
|
} else {
|
|
sp->total_tcp_fifos = (tx_fifo_num - FIFO_UDP_MAX_NUM -
|
|
FIFO_OTHER_MAX_NUM);
|
|
sp->udp_fifo_idx = sp->total_tcp_fifos;
|
|
sp->total_udp_fifos = FIFO_UDP_MAX_NUM;
|
|
sp->other_fifo_idx = sp->udp_fifo_idx + FIFO_UDP_MAX_NUM;
|
|
}
|
|
|
|
config->multiq = dev_multiq;
|
|
for (i = 0; i < config->tx_fifo_num; i++) {
|
|
struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
|
|
|
|
tx_cfg->fifo_len = tx_fifo_len[i];
|
|
tx_cfg->fifo_priority = i;
|
|
}
|
|
|
|
/* mapping the QoS priority to the configured fifos */
|
|
for (i = 0; i < MAX_TX_FIFOS; i++)
|
|
config->fifo_mapping[i] = fifo_map[config->tx_fifo_num - 1][i];
|
|
|
|
/* map the hashing selector table to the configured fifos */
|
|
for (i = 0; i < config->tx_fifo_num; i++)
|
|
sp->fifo_selector[i] = fifo_selector[i];
|
|
|
|
|
|
config->tx_intr_type = TXD_INT_TYPE_UTILZ;
|
|
for (i = 0; i < config->tx_fifo_num; i++) {
|
|
struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
|
|
|
|
tx_cfg->f_no_snoop = (NO_SNOOP_TXD | NO_SNOOP_TXD_BUFFER);
|
|
if (tx_cfg->fifo_len < 65) {
|
|
config->tx_intr_type = TXD_INT_TYPE_PER_LIST;
|
|
break;
|
|
}
|
|
}
|
|
/* + 2 because one Txd for skb->data and one Txd for UFO */
|
|
config->max_txds = MAX_SKB_FRAGS + 2;
|
|
|
|
/* Rx side parameters. */
|
|
config->rx_ring_num = rx_ring_num;
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
|
|
struct ring_info *ring = &mac_control->rings[i];
|
|
|
|
rx_cfg->num_rxd = rx_ring_sz[i] * (rxd_count[sp->rxd_mode] + 1);
|
|
rx_cfg->ring_priority = i;
|
|
ring->rx_bufs_left = 0;
|
|
ring->rxd_mode = sp->rxd_mode;
|
|
ring->rxd_count = rxd_count[sp->rxd_mode];
|
|
ring->pdev = sp->pdev;
|
|
ring->dev = sp->dev;
|
|
}
|
|
|
|
for (i = 0; i < rx_ring_num; i++) {
|
|
struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
|
|
|
|
rx_cfg->ring_org = RING_ORG_BUFF1;
|
|
rx_cfg->f_no_snoop = (NO_SNOOP_RXD | NO_SNOOP_RXD_BUFFER);
|
|
}
|
|
|
|
/* Setting Mac Control parameters */
|
|
mac_control->rmac_pause_time = rmac_pause_time;
|
|
mac_control->mc_pause_threshold_q0q3 = mc_pause_threshold_q0q3;
|
|
mac_control->mc_pause_threshold_q4q7 = mc_pause_threshold_q4q7;
|
|
|
|
|
|
/* initialize the shared memory used by the NIC and the host */
|
|
if (init_shared_mem(sp)) {
|
|
DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", dev->name);
|
|
ret = -ENOMEM;
|
|
goto mem_alloc_failed;
|
|
}
|
|
|
|
sp->bar0 = pci_ioremap_bar(pdev, 0);
|
|
if (!sp->bar0) {
|
|
DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n",
|
|
dev->name);
|
|
ret = -ENOMEM;
|
|
goto bar0_remap_failed;
|
|
}
|
|
|
|
sp->bar1 = pci_ioremap_bar(pdev, 2);
|
|
if (!sp->bar1) {
|
|
DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n",
|
|
dev->name);
|
|
ret = -ENOMEM;
|
|
goto bar1_remap_failed;
|
|
}
|
|
|
|
dev->irq = pdev->irq;
|
|
dev->base_addr = (unsigned long)sp->bar0;
|
|
|
|
/* Initializing the BAR1 address as the start of the FIFO pointer. */
|
|
for (j = 0; j < MAX_TX_FIFOS; j++) {
|
|
mac_control->tx_FIFO_start[j] =
|
|
(struct TxFIFO_element __iomem *)
|
|
(sp->bar1 + (j * 0x00020000));
|
|
}
|
|
|
|
/* Driver entry points */
|
|
dev->netdev_ops = &s2io_netdev_ops;
|
|
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
|
|
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
|
|
|
|
dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
|
|
if (sp->high_dma_flag == true)
|
|
dev->features |= NETIF_F_HIGHDMA;
|
|
dev->features |= NETIF_F_TSO;
|
|
dev->features |= NETIF_F_TSO6;
|
|
if ((sp->device_type & XFRAME_II_DEVICE) && (ufo)) {
|
|
dev->features |= NETIF_F_UFO;
|
|
dev->features |= NETIF_F_HW_CSUM;
|
|
}
|
|
dev->watchdog_timeo = WATCH_DOG_TIMEOUT;
|
|
INIT_WORK(&sp->rst_timer_task, s2io_restart_nic);
|
|
INIT_WORK(&sp->set_link_task, s2io_set_link);
|
|
|
|
pci_save_state(sp->pdev);
|
|
|
|
/* Setting swapper control on the NIC, for proper reset operation */
|
|
if (s2io_set_swapper(sp)) {
|
|
DBG_PRINT(ERR_DBG, "%s: swapper settings are wrong\n",
|
|
dev->name);
|
|
ret = -EAGAIN;
|
|
goto set_swap_failed;
|
|
}
|
|
|
|
/* Verify if the Herc works on the slot its placed into */
|
|
if (sp->device_type & XFRAME_II_DEVICE) {
|
|
mode = s2io_verify_pci_mode(sp);
|
|
if (mode < 0) {
|
|
DBG_PRINT(ERR_DBG, "%s: Unsupported PCI bus mode\n",
|
|
__func__);
|
|
ret = -EBADSLT;
|
|
goto set_swap_failed;
|
|
}
|
|
}
|
|
|
|
if (sp->config.intr_type == MSI_X) {
|
|
sp->num_entries = config->rx_ring_num + 1;
|
|
ret = s2io_enable_msi_x(sp);
|
|
|
|
if (!ret) {
|
|
ret = s2io_test_msi(sp);
|
|
/* rollback MSI-X, will re-enable during add_isr() */
|
|
remove_msix_isr(sp);
|
|
}
|
|
if (ret) {
|
|
|
|
DBG_PRINT(ERR_DBG,
|
|
"MSI-X requested but failed to enable\n");
|
|
sp->config.intr_type = INTA;
|
|
}
|
|
}
|
|
|
|
if (config->intr_type == MSI_X) {
|
|
for (i = 0; i < config->rx_ring_num ; i++) {
|
|
struct ring_info *ring = &mac_control->rings[i];
|
|
|
|
netif_napi_add(dev, &ring->napi, s2io_poll_msix, 64);
|
|
}
|
|
} else {
|
|
netif_napi_add(dev, &sp->napi, s2io_poll_inta, 64);
|
|
}
|
|
|
|
/* Not needed for Herc */
|
|
if (sp->device_type & XFRAME_I_DEVICE) {
|
|
/*
|
|
* Fix for all "FFs" MAC address problems observed on
|
|
* Alpha platforms
|
|
*/
|
|
fix_mac_address(sp);
|
|
s2io_reset(sp);
|
|
}
|
|
|
|
/*
|
|
* MAC address initialization.
|
|
* For now only one mac address will be read and used.
|
|
*/
|
|
bar0 = sp->bar0;
|
|
val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
|
|
RMAC_ADDR_CMD_MEM_OFFSET(0 + S2IO_MAC_ADDR_START_OFFSET);
|
|
writeq(val64, &bar0->rmac_addr_cmd_mem);
|
|
wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
|
|
RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
|
|
S2IO_BIT_RESET);
|
|
tmp64 = readq(&bar0->rmac_addr_data0_mem);
|
|
mac_down = (u32)tmp64;
|
|
mac_up = (u32) (tmp64 >> 32);
|
|
|
|
sp->def_mac_addr[0].mac_addr[3] = (u8) (mac_up);
|
|
sp->def_mac_addr[0].mac_addr[2] = (u8) (mac_up >> 8);
|
|
sp->def_mac_addr[0].mac_addr[1] = (u8) (mac_up >> 16);
|
|
sp->def_mac_addr[0].mac_addr[0] = (u8) (mac_up >> 24);
|
|
sp->def_mac_addr[0].mac_addr[5] = (u8) (mac_down >> 16);
|
|
sp->def_mac_addr[0].mac_addr[4] = (u8) (mac_down >> 24);
|
|
|
|
/* Set the factory defined MAC address initially */
|
|
dev->addr_len = ETH_ALEN;
|
|
memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
|
|
memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
|
|
|
|
/* initialize number of multicast & unicast MAC entries variables */
|
|
if (sp->device_type == XFRAME_I_DEVICE) {
|
|
config->max_mc_addr = S2IO_XENA_MAX_MC_ADDRESSES;
|
|
config->max_mac_addr = S2IO_XENA_MAX_MAC_ADDRESSES;
|
|
config->mc_start_offset = S2IO_XENA_MC_ADDR_START_OFFSET;
|
|
} else if (sp->device_type == XFRAME_II_DEVICE) {
|
|
config->max_mc_addr = S2IO_HERC_MAX_MC_ADDRESSES;
|
|
config->max_mac_addr = S2IO_HERC_MAX_MAC_ADDRESSES;
|
|
config->mc_start_offset = S2IO_HERC_MC_ADDR_START_OFFSET;
|
|
}
|
|
|
|
/* store mac addresses from CAM to s2io_nic structure */
|
|
do_s2io_store_unicast_mc(sp);
|
|
|
|
/* Configure MSIX vector for number of rings configured plus one */
|
|
if ((sp->device_type == XFRAME_II_DEVICE) &&
|
|
(config->intr_type == MSI_X))
|
|
sp->num_entries = config->rx_ring_num + 1;
|
|
|
|
/* Store the values of the MSIX table in the s2io_nic structure */
|
|
store_xmsi_data(sp);
|
|
/* reset Nic and bring it to known state */
|
|
s2io_reset(sp);
|
|
|
|
/*
|
|
* Initialize link state flags
|
|
* and the card state parameter
|
|
*/
|
|
sp->state = 0;
|
|
|
|
/* Initialize spinlocks */
|
|
for (i = 0; i < sp->config.tx_fifo_num; i++) {
|
|
struct fifo_info *fifo = &mac_control->fifos[i];
|
|
|
|
spin_lock_init(&fifo->tx_lock);
|
|
}
|
|
|
|
/*
|
|
* SXE-002: Configure link and activity LED to init state
|
|
* on driver load.
|
|
*/
|
|
subid = sp->pdev->subsystem_device;
|
|
if ((subid & 0xFF) >= 0x07) {
|
|
val64 = readq(&bar0->gpio_control);
|
|
val64 |= 0x0000800000000000ULL;
|
|
writeq(val64, &bar0->gpio_control);
|
|
val64 = 0x0411040400000000ULL;
|
|
writeq(val64, (void __iomem *)bar0 + 0x2700);
|
|
val64 = readq(&bar0->gpio_control);
|
|
}
|
|
|
|
sp->rx_csum = 1; /* Rx chksum verify enabled by default */
|
|
|
|
if (register_netdev(dev)) {
|
|
DBG_PRINT(ERR_DBG, "Device registration failed\n");
|
|
ret = -ENODEV;
|
|
goto register_failed;
|
|
}
|
|
s2io_vpd_read(sp);
|
|
DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2007 Neterion Inc.\n");
|
|
DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n", dev->name,
|
|
sp->product_name, pdev->revision);
|
|
DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,
|
|
s2io_driver_version);
|
|
DBG_PRINT(ERR_DBG, "%s: MAC Address: %pM\n", dev->name, dev->dev_addr);
|
|
DBG_PRINT(ERR_DBG, "Serial number: %s\n", sp->serial_num);
|
|
if (sp->device_type & XFRAME_II_DEVICE) {
|
|
mode = s2io_print_pci_mode(sp);
|
|
if (mode < 0) {
|
|
ret = -EBADSLT;
|
|
unregister_netdev(dev);
|
|
goto set_swap_failed;
|
|
}
|
|
}
|
|
switch (sp->rxd_mode) {
|
|
case RXD_MODE_1:
|
|
DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n",
|
|
dev->name);
|
|
break;
|
|
case RXD_MODE_3B:
|
|
DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n",
|
|
dev->name);
|
|
break;
|
|
}
|
|
|
|
switch (sp->config.napi) {
|
|
case 0:
|
|
DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name);
|
|
break;
|
|
case 1:
|
|
DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
|
|
break;
|
|
}
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,
|
|
sp->config.tx_fifo_num);
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Using %d Rx ring(s)\n", dev->name,
|
|
sp->config.rx_ring_num);
|
|
|
|
switch (sp->config.intr_type) {
|
|
case INTA:
|
|
DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);
|
|
break;
|
|
case MSI_X:
|
|
DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name);
|
|
break;
|
|
}
|
|
if (sp->config.multiq) {
|
|
for (i = 0; i < sp->config.tx_fifo_num; i++) {
|
|
struct fifo_info *fifo = &mac_control->fifos[i];
|
|
|
|
fifo->multiq = config->multiq;
|
|
}
|
|
DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n",
|
|
dev->name);
|
|
} else
|
|
DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n",
|
|
dev->name);
|
|
|
|
switch (sp->config.tx_steering_type) {
|
|
case NO_STEERING:
|
|
DBG_PRINT(ERR_DBG, "%s: No steering enabled for transmit\n",
|
|
dev->name);
|
|
break;
|
|
case TX_PRIORITY_STEERING:
|
|
DBG_PRINT(ERR_DBG,
|
|
"%s: Priority steering enabled for transmit\n",
|
|
dev->name);
|
|
break;
|
|
case TX_DEFAULT_STEERING:
|
|
DBG_PRINT(ERR_DBG,
|
|
"%s: Default steering enabled for transmit\n",
|
|
dev->name);
|
|
}
|
|
|
|
if (sp->lro)
|
|
DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",
|
|
dev->name);
|
|
if (ufo)
|
|
DBG_PRINT(ERR_DBG,
|
|
"%s: UDP Fragmentation Offload(UFO) enabled\n",
|
|
dev->name);
|
|
/* Initialize device name */
|
|
sprintf(sp->name, "%s Neterion %s", dev->name, sp->product_name);
|
|
|
|
if (vlan_tag_strip)
|
|
sp->vlan_strip_flag = 1;
|
|
else
|
|
sp->vlan_strip_flag = 0;
|
|
|
|
/*
|
|
* Make Link state as off at this point, when the Link change
|
|
* interrupt comes the state will be automatically changed to
|
|
* the right state.
|
|
*/
|
|
netif_carrier_off(dev);
|
|
|
|
return 0;
|
|
|
|
register_failed:
|
|
set_swap_failed:
|
|
iounmap(sp->bar1);
|
|
bar1_remap_failed:
|
|
iounmap(sp->bar0);
|
|
bar0_remap_failed:
|
|
mem_alloc_failed:
|
|
free_shared_mem(sp);
|
|
pci_disable_device(pdev);
|
|
pci_release_regions(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
free_netdev(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* s2io_rem_nic - Free the PCI device
|
|
* @pdev: structure containing the PCI related information of the device.
|
|
* Description: This function is called by the Pci subsystem to release a
|
|
* PCI device and free up all resource held up by the device. This could
|
|
* be in response to a Hot plug event or when the driver is to be removed
|
|
* from memory.
|
|
*/
|
|
|
|
static void __devexit s2io_rem_nic(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev =
|
|
(struct net_device *)pci_get_drvdata(pdev);
|
|
struct s2io_nic *sp;
|
|
|
|
if (dev == NULL) {
|
|
DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n");
|
|
return;
|
|
}
|
|
|
|
flush_scheduled_work();
|
|
|
|
sp = netdev_priv(dev);
|
|
unregister_netdev(dev);
|
|
|
|
free_shared_mem(sp);
|
|
iounmap(sp->bar0);
|
|
iounmap(sp->bar1);
|
|
pci_release_regions(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
free_netdev(dev);
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
/**
|
|
* s2io_starter - Entry point for the driver
|
|
* Description: This function is the entry point for the driver. It verifies
|
|
* the module loadable parameters and initializes PCI configuration space.
|
|
*/
|
|
|
|
static int __init s2io_starter(void)
|
|
{
|
|
return pci_register_driver(&s2io_driver);
|
|
}
|
|
|
|
/**
|
|
* s2io_closer - Cleanup routine for the driver
|
|
* Description: This function is the cleanup routine for the driver. It unregist * ers the driver.
|
|
*/
|
|
|
|
static __exit void s2io_closer(void)
|
|
{
|
|
pci_unregister_driver(&s2io_driver);
|
|
DBG_PRINT(INIT_DBG, "cleanup done\n");
|
|
}
|
|
|
|
module_init(s2io_starter);
|
|
module_exit(s2io_closer);
|
|
|
|
static int check_L2_lro_capable(u8 *buffer, struct iphdr **ip,
|
|
struct tcphdr **tcp, struct RxD_t *rxdp,
|
|
struct s2io_nic *sp)
|
|
{
|
|
int ip_off;
|
|
u8 l2_type = (u8)((rxdp->Control_1 >> 37) & 0x7), ip_len;
|
|
|
|
if (!(rxdp->Control_1 & RXD_FRAME_PROTO_TCP)) {
|
|
DBG_PRINT(INIT_DBG,
|
|
"%s: Non-TCP frames not supported for LRO\n",
|
|
__func__);
|
|
return -1;
|
|
}
|
|
|
|
/* Checking for DIX type or DIX type with VLAN */
|
|
if ((l2_type == 0) || (l2_type == 4)) {
|
|
ip_off = HEADER_ETHERNET_II_802_3_SIZE;
|
|
/*
|
|
* If vlan stripping is disabled and the frame is VLAN tagged,
|
|
* shift the offset by the VLAN header size bytes.
|
|
*/
|
|
if ((!sp->vlan_strip_flag) &&
|
|
(rxdp->Control_1 & RXD_FRAME_VLAN_TAG))
|
|
ip_off += HEADER_VLAN_SIZE;
|
|
} else {
|
|
/* LLC, SNAP etc are considered non-mergeable */
|
|
return -1;
|
|
}
|
|
|
|
*ip = (struct iphdr *)((u8 *)buffer + ip_off);
|
|
ip_len = (u8)((*ip)->ihl);
|
|
ip_len <<= 2;
|
|
*tcp = (struct tcphdr *)((unsigned long)*ip + ip_len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int check_for_socket_match(struct lro *lro, struct iphdr *ip,
|
|
struct tcphdr *tcp)
|
|
{
|
|
DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
|
|
if ((lro->iph->saddr != ip->saddr) ||
|
|
(lro->iph->daddr != ip->daddr) ||
|
|
(lro->tcph->source != tcp->source) ||
|
|
(lro->tcph->dest != tcp->dest))
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
static inline int get_l4_pyld_length(struct iphdr *ip, struct tcphdr *tcp)
|
|
{
|
|
return ntohs(ip->tot_len) - (ip->ihl << 2) - (tcp->doff << 2);
|
|
}
|
|
|
|
static void initiate_new_session(struct lro *lro, u8 *l2h,
|
|
struct iphdr *ip, struct tcphdr *tcp,
|
|
u32 tcp_pyld_len, u16 vlan_tag)
|
|
{
|
|
DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
|
|
lro->l2h = l2h;
|
|
lro->iph = ip;
|
|
lro->tcph = tcp;
|
|
lro->tcp_next_seq = tcp_pyld_len + ntohl(tcp->seq);
|
|
lro->tcp_ack = tcp->ack_seq;
|
|
lro->sg_num = 1;
|
|
lro->total_len = ntohs(ip->tot_len);
|
|
lro->frags_len = 0;
|
|
lro->vlan_tag = vlan_tag;
|
|
/*
|
|
* Check if we saw TCP timestamp.
|
|
* Other consistency checks have already been done.
|
|
*/
|
|
if (tcp->doff == 8) {
|
|
__be32 *ptr;
|
|
ptr = (__be32 *)(tcp+1);
|
|
lro->saw_ts = 1;
|
|
lro->cur_tsval = ntohl(*(ptr+1));
|
|
lro->cur_tsecr = *(ptr+2);
|
|
}
|
|
lro->in_use = 1;
|
|
}
|
|
|
|
static void update_L3L4_header(struct s2io_nic *sp, struct lro *lro)
|
|
{
|
|
struct iphdr *ip = lro->iph;
|
|
struct tcphdr *tcp = lro->tcph;
|
|
__sum16 nchk;
|
|
struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
|
|
|
|
DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
|
|
|
|
/* Update L3 header */
|
|
ip->tot_len = htons(lro->total_len);
|
|
ip->check = 0;
|
|
nchk = ip_fast_csum((u8 *)lro->iph, ip->ihl);
|
|
ip->check = nchk;
|
|
|
|
/* Update L4 header */
|
|
tcp->ack_seq = lro->tcp_ack;
|
|
tcp->window = lro->window;
|
|
|
|
/* Update tsecr field if this session has timestamps enabled */
|
|
if (lro->saw_ts) {
|
|
__be32 *ptr = (__be32 *)(tcp + 1);
|
|
*(ptr+2) = lro->cur_tsecr;
|
|
}
|
|
|
|
/* Update counters required for calculation of
|
|
* average no. of packets aggregated.
|
|
*/
|
|
swstats->sum_avg_pkts_aggregated += lro->sg_num;
|
|
swstats->num_aggregations++;
|
|
}
|
|
|
|
static void aggregate_new_rx(struct lro *lro, struct iphdr *ip,
|
|
struct tcphdr *tcp, u32 l4_pyld)
|
|
{
|
|
DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
|
|
lro->total_len += l4_pyld;
|
|
lro->frags_len += l4_pyld;
|
|
lro->tcp_next_seq += l4_pyld;
|
|
lro->sg_num++;
|
|
|
|
/* Update ack seq no. and window ad(from this pkt) in LRO object */
|
|
lro->tcp_ack = tcp->ack_seq;
|
|
lro->window = tcp->window;
|
|
|
|
if (lro->saw_ts) {
|
|
__be32 *ptr;
|
|
/* Update tsecr and tsval from this packet */
|
|
ptr = (__be32 *)(tcp+1);
|
|
lro->cur_tsval = ntohl(*(ptr+1));
|
|
lro->cur_tsecr = *(ptr + 2);
|
|
}
|
|
}
|
|
|
|
static int verify_l3_l4_lro_capable(struct lro *l_lro, struct iphdr *ip,
|
|
struct tcphdr *tcp, u32 tcp_pyld_len)
|
|
{
|
|
u8 *ptr;
|
|
|
|
DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
|
|
|
|
if (!tcp_pyld_len) {
|
|
/* Runt frame or a pure ack */
|
|
return -1;
|
|
}
|
|
|
|
if (ip->ihl != 5) /* IP has options */
|
|
return -1;
|
|
|
|
/* If we see CE codepoint in IP header, packet is not mergeable */
|
|
if (INET_ECN_is_ce(ipv4_get_dsfield(ip)))
|
|
return -1;
|
|
|
|
/* If we see ECE or CWR flags in TCP header, packet is not mergeable */
|
|
if (tcp->urg || tcp->psh || tcp->rst ||
|
|
tcp->syn || tcp->fin ||
|
|
tcp->ece || tcp->cwr || !tcp->ack) {
|
|
/*
|
|
* Currently recognize only the ack control word and
|
|
* any other control field being set would result in
|
|
* flushing the LRO session
|
|
*/
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Allow only one TCP timestamp option. Don't aggregate if
|
|
* any other options are detected.
|
|
*/
|
|
if (tcp->doff != 5 && tcp->doff != 8)
|
|
return -1;
|
|
|
|
if (tcp->doff == 8) {
|
|
ptr = (u8 *)(tcp + 1);
|
|
while (*ptr == TCPOPT_NOP)
|
|
ptr++;
|
|
if (*ptr != TCPOPT_TIMESTAMP || *(ptr+1) != TCPOLEN_TIMESTAMP)
|
|
return -1;
|
|
|
|
/* Ensure timestamp value increases monotonically */
|
|
if (l_lro)
|
|
if (l_lro->cur_tsval > ntohl(*((__be32 *)(ptr+2))))
|
|
return -1;
|
|
|
|
/* timestamp echo reply should be non-zero */
|
|
if (*((__be32 *)(ptr+6)) == 0)
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s2io_club_tcp_session(struct ring_info *ring_data, u8 *buffer,
|
|
u8 **tcp, u32 *tcp_len, struct lro **lro,
|
|
struct RxD_t *rxdp, struct s2io_nic *sp)
|
|
{
|
|
struct iphdr *ip;
|
|
struct tcphdr *tcph;
|
|
int ret = 0, i;
|
|
u16 vlan_tag = 0;
|
|
struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
|
|
|
|
ret = check_L2_lro_capable(buffer, &ip, (struct tcphdr **)tcp,
|
|
rxdp, sp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
DBG_PRINT(INFO_DBG, "IP Saddr: %x Daddr: %x\n", ip->saddr, ip->daddr);
|
|
|
|
vlan_tag = RXD_GET_VLAN_TAG(rxdp->Control_2);
|
|
tcph = (struct tcphdr *)*tcp;
|
|
*tcp_len = get_l4_pyld_length(ip, tcph);
|
|
for (i = 0; i < MAX_LRO_SESSIONS; i++) {
|
|
struct lro *l_lro = &ring_data->lro0_n[i];
|
|
if (l_lro->in_use) {
|
|
if (check_for_socket_match(l_lro, ip, tcph))
|
|
continue;
|
|
/* Sock pair matched */
|
|
*lro = l_lro;
|
|
|
|
if ((*lro)->tcp_next_seq != ntohl(tcph->seq)) {
|
|
DBG_PRINT(INFO_DBG, "%s: Out of sequence. "
|
|
"expected 0x%x, actual 0x%x\n",
|
|
__func__,
|
|
(*lro)->tcp_next_seq,
|
|
ntohl(tcph->seq));
|
|
|
|
swstats->outof_sequence_pkts++;
|
|
ret = 2;
|
|
break;
|
|
}
|
|
|
|
if (!verify_l3_l4_lro_capable(l_lro, ip, tcph,
|
|
*tcp_len))
|
|
ret = 1; /* Aggregate */
|
|
else
|
|
ret = 2; /* Flush both */
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (ret == 0) {
|
|
/* Before searching for available LRO objects,
|
|
* check if the pkt is L3/L4 aggregatable. If not
|
|
* don't create new LRO session. Just send this
|
|
* packet up.
|
|
*/
|
|
if (verify_l3_l4_lro_capable(NULL, ip, tcph, *tcp_len))
|
|
return 5;
|
|
|
|
for (i = 0; i < MAX_LRO_SESSIONS; i++) {
|
|
struct lro *l_lro = &ring_data->lro0_n[i];
|
|
if (!(l_lro->in_use)) {
|
|
*lro = l_lro;
|
|
ret = 3; /* Begin anew */
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (ret == 0) { /* sessions exceeded */
|
|
DBG_PRINT(INFO_DBG, "%s: All LRO sessions already in use\n",
|
|
__func__);
|
|
*lro = NULL;
|
|
return ret;
|
|
}
|
|
|
|
switch (ret) {
|
|
case 3:
|
|
initiate_new_session(*lro, buffer, ip, tcph, *tcp_len,
|
|
vlan_tag);
|
|
break;
|
|
case 2:
|
|
update_L3L4_header(sp, *lro);
|
|
break;
|
|
case 1:
|
|
aggregate_new_rx(*lro, ip, tcph, *tcp_len);
|
|
if ((*lro)->sg_num == sp->lro_max_aggr_per_sess) {
|
|
update_L3L4_header(sp, *lro);
|
|
ret = 4; /* Flush the LRO */
|
|
}
|
|
break;
|
|
default:
|
|
DBG_PRINT(ERR_DBG, "%s: Don't know, can't say!!\n", __func__);
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void clear_lro_session(struct lro *lro)
|
|
{
|
|
static u16 lro_struct_size = sizeof(struct lro);
|
|
|
|
memset(lro, 0, lro_struct_size);
|
|
}
|
|
|
|
static void queue_rx_frame(struct sk_buff *skb, u16 vlan_tag)
|
|
{
|
|
struct net_device *dev = skb->dev;
|
|
struct s2io_nic *sp = netdev_priv(dev);
|
|
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
if (sp->vlgrp && vlan_tag && (sp->vlan_strip_flag)) {
|
|
/* Queueing the vlan frame to the upper layer */
|
|
if (sp->config.napi)
|
|
vlan_hwaccel_receive_skb(skb, sp->vlgrp, vlan_tag);
|
|
else
|
|
vlan_hwaccel_rx(skb, sp->vlgrp, vlan_tag);
|
|
} else {
|
|
if (sp->config.napi)
|
|
netif_receive_skb(skb);
|
|
else
|
|
netif_rx(skb);
|
|
}
|
|
}
|
|
|
|
static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro,
|
|
struct sk_buff *skb, u32 tcp_len)
|
|
{
|
|
struct sk_buff *first = lro->parent;
|
|
struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
|
|
|
|
first->len += tcp_len;
|
|
first->data_len = lro->frags_len;
|
|
skb_pull(skb, (skb->len - tcp_len));
|
|
if (skb_shinfo(first)->frag_list)
|
|
lro->last_frag->next = skb;
|
|
else
|
|
skb_shinfo(first)->frag_list = skb;
|
|
first->truesize += skb->truesize;
|
|
lro->last_frag = skb;
|
|
swstats->clubbed_frms_cnt++;
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* s2io_io_error_detected - called when PCI error is detected
|
|
* @pdev: Pointer to PCI device
|
|
* @state: The current pci connection state
|
|
*
|
|
* This function is called after a PCI bus error affecting
|
|
* this device has been detected.
|
|
*/
|
|
static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev,
|
|
pci_channel_state_t state)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct s2io_nic *sp = netdev_priv(netdev);
|
|
|
|
netif_device_detach(netdev);
|
|
|
|
if (state == pci_channel_io_perm_failure)
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
|
|
if (netif_running(netdev)) {
|
|
/* Bring down the card, while avoiding PCI I/O */
|
|
do_s2io_card_down(sp, 0);
|
|
}
|
|
pci_disable_device(pdev);
|
|
|
|
return PCI_ERS_RESULT_NEED_RESET;
|
|
}
|
|
|
|
/**
|
|
* s2io_io_slot_reset - called after the pci bus has been reset.
|
|
* @pdev: Pointer to PCI device
|
|
*
|
|
* Restart the card from scratch, as if from a cold-boot.
|
|
* At this point, the card has exprienced a hard reset,
|
|
* followed by fixups by BIOS, and has its config space
|
|
* set up identically to what it was at cold boot.
|
|
*/
|
|
static pci_ers_result_t s2io_io_slot_reset(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct s2io_nic *sp = netdev_priv(netdev);
|
|
|
|
if (pci_enable_device(pdev)) {
|
|
pr_err("Cannot re-enable PCI device after reset.\n");
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
s2io_reset(sp);
|
|
|
|
return PCI_ERS_RESULT_RECOVERED;
|
|
}
|
|
|
|
/**
|
|
* s2io_io_resume - called when traffic can start flowing again.
|
|
* @pdev: Pointer to PCI device
|
|
*
|
|
* This callback is called when the error recovery driver tells
|
|
* us that its OK to resume normal operation.
|
|
*/
|
|
static void s2io_io_resume(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct s2io_nic *sp = netdev_priv(netdev);
|
|
|
|
if (netif_running(netdev)) {
|
|
if (s2io_card_up(sp)) {
|
|
pr_err("Can't bring device back up after reset.\n");
|
|
return;
|
|
}
|
|
|
|
if (s2io_set_mac_addr(netdev, netdev->dev_addr) == FAILURE) {
|
|
s2io_card_down(sp);
|
|
pr_err("Can't restore mac addr after reset.\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
netif_device_attach(netdev);
|
|
netif_tx_wake_all_queues(netdev);
|
|
}
|