241 lines
6.2 KiB
C
241 lines
6.2 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Intel INT0002 "Virtual GPIO" driver
|
|
*
|
|
* Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
|
|
*
|
|
* Loosely based on android x86 kernel code which is:
|
|
*
|
|
* Copyright (c) 2014, Intel Corporation.
|
|
*
|
|
* Author: Dyut Kumar Sil <dyut.k.sil@intel.com>
|
|
*
|
|
* Some peripherals on Bay Trail and Cherry Trail platforms signal a Power
|
|
* Management Event (PME) to the Power Management Controller (PMC) to wakeup
|
|
* the system. When this happens software needs to clear the PME bus 0 status
|
|
* bit in the GPE0a_STS register to avoid an IRQ storm on IRQ 9.
|
|
*
|
|
* This is modelled in ACPI through the INT0002 ACPI device, which is
|
|
* called a "Virtual GPIO controller" in ACPI because it defines the event
|
|
* handler to call when the PME triggers through _AEI and _L02 / _E02
|
|
* methods as would be done for a real GPIO interrupt in ACPI. Note this
|
|
* is a hack to define an AML event handler for the PME while using existing
|
|
* ACPI mechanisms, this is not a real GPIO at all.
|
|
*
|
|
* This driver will bind to the INT0002 device, and register as a GPIO
|
|
* controller, letting gpiolib-acpi.c call the _L02 handler as it would
|
|
* for a real GPIO controller.
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/bitmap.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/suspend.h>
|
|
|
|
#include <asm/cpu_device_id.h>
|
|
#include <asm/intel-family.h>
|
|
|
|
#define DRV_NAME "INT0002 Virtual GPIO"
|
|
|
|
/* For some reason the virtual GPIO pin tied to the GPE is numbered pin 2 */
|
|
#define GPE0A_PME_B0_VIRT_GPIO_PIN 2
|
|
|
|
#define GPE0A_PME_B0_STS_BIT BIT(13)
|
|
#define GPE0A_PME_B0_EN_BIT BIT(13)
|
|
#define GPE0A_STS_PORT 0x420
|
|
#define GPE0A_EN_PORT 0x428
|
|
|
|
/*
|
|
* As this is not a real GPIO at all, but just a hack to model an event in
|
|
* ACPI the get / set functions are dummy functions.
|
|
*/
|
|
|
|
static int int0002_gpio_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void int0002_gpio_set(struct gpio_chip *chip, unsigned int offset,
|
|
int value)
|
|
{
|
|
}
|
|
|
|
static int int0002_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned int offset, int value)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void int0002_irq_ack(struct irq_data *data)
|
|
{
|
|
outl(GPE0A_PME_B0_STS_BIT, GPE0A_STS_PORT);
|
|
}
|
|
|
|
static void int0002_irq_unmask(struct irq_data *data)
|
|
{
|
|
u32 gpe_en_reg;
|
|
|
|
gpe_en_reg = inl(GPE0A_EN_PORT);
|
|
gpe_en_reg |= GPE0A_PME_B0_EN_BIT;
|
|
outl(gpe_en_reg, GPE0A_EN_PORT);
|
|
}
|
|
|
|
static void int0002_irq_mask(struct irq_data *data)
|
|
{
|
|
u32 gpe_en_reg;
|
|
|
|
gpe_en_reg = inl(GPE0A_EN_PORT);
|
|
gpe_en_reg &= ~GPE0A_PME_B0_EN_BIT;
|
|
outl(gpe_en_reg, GPE0A_EN_PORT);
|
|
}
|
|
|
|
static int int0002_irq_set_wake(struct irq_data *data, unsigned int on)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct platform_device *pdev = to_platform_device(chip->parent);
|
|
int irq = platform_get_irq(pdev, 0);
|
|
|
|
/* Propagate to parent irq */
|
|
if (on)
|
|
enable_irq_wake(irq);
|
|
else
|
|
disable_irq_wake(irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t int0002_irq(int irq, void *data)
|
|
{
|
|
struct gpio_chip *chip = data;
|
|
u32 gpe_sts_reg;
|
|
|
|
gpe_sts_reg = inl(GPE0A_STS_PORT);
|
|
if (!(gpe_sts_reg & GPE0A_PME_B0_STS_BIT))
|
|
return IRQ_NONE;
|
|
|
|
generic_handle_irq(irq_find_mapping(chip->irq.domain,
|
|
GPE0A_PME_B0_VIRT_GPIO_PIN));
|
|
|
|
pm_system_wakeup();
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct irq_chip int0002_byt_irqchip = {
|
|
.name = DRV_NAME,
|
|
.irq_ack = int0002_irq_ack,
|
|
.irq_mask = int0002_irq_mask,
|
|
.irq_unmask = int0002_irq_unmask,
|
|
.irq_set_wake = int0002_irq_set_wake,
|
|
};
|
|
|
|
static struct irq_chip int0002_cht_irqchip = {
|
|
.name = DRV_NAME,
|
|
.irq_ack = int0002_irq_ack,
|
|
.irq_mask = int0002_irq_mask,
|
|
.irq_unmask = int0002_irq_unmask,
|
|
/*
|
|
* No set_wake, on CHT the IRQ is typically shared with the ACPI SCI
|
|
* and we don't want to mess with the ACPI SCI irq settings.
|
|
*/
|
|
};
|
|
|
|
static const struct x86_cpu_id int0002_cpu_ids[] = {
|
|
INTEL_CPU_FAM6(ATOM_SILVERMONT, int0002_byt_irqchip), /* Valleyview, Bay Trail */
|
|
INTEL_CPU_FAM6(ATOM_AIRMONT, int0002_cht_irqchip), /* Braswell, Cherry Trail */
|
|
{}
|
|
};
|
|
|
|
static int int0002_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
const struct x86_cpu_id *cpu_id;
|
|
struct irq_chip *irq_chip;
|
|
struct gpio_chip *chip;
|
|
int irq, ret;
|
|
|
|
/* Menlow has a different INT0002 device? <sigh> */
|
|
cpu_id = x86_match_cpu(int0002_cpu_ids);
|
|
if (!cpu_id)
|
|
return -ENODEV;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(dev, "Error getting IRQ: %d\n", irq);
|
|
return irq;
|
|
}
|
|
|
|
chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
chip->label = DRV_NAME;
|
|
chip->parent = dev;
|
|
chip->owner = THIS_MODULE;
|
|
chip->get = int0002_gpio_get;
|
|
chip->set = int0002_gpio_set;
|
|
chip->direction_input = int0002_gpio_get;
|
|
chip->direction_output = int0002_gpio_direction_output;
|
|
chip->base = -1;
|
|
chip->ngpio = GPE0A_PME_B0_VIRT_GPIO_PIN + 1;
|
|
chip->irq.need_valid_mask = true;
|
|
|
|
ret = devm_gpiochip_add_data(&pdev->dev, chip, NULL);
|
|
if (ret) {
|
|
dev_err(dev, "Error adding gpio chip: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
bitmap_clear(chip->irq.valid_mask, 0, GPE0A_PME_B0_VIRT_GPIO_PIN);
|
|
|
|
/*
|
|
* We manually request the irq here instead of passing a flow-handler
|
|
* to gpiochip_set_chained_irqchip, because the irq is shared.
|
|
*/
|
|
ret = devm_request_irq(dev, irq, int0002_irq,
|
|
IRQF_SHARED, "INT0002", chip);
|
|
if (ret) {
|
|
dev_err(dev, "Error requesting IRQ %d: %d\n", irq, ret);
|
|
return ret;
|
|
}
|
|
|
|
irq_chip = (struct irq_chip *)cpu_id->driver_data;
|
|
|
|
ret = gpiochip_irqchip_add(chip, irq_chip, 0, handle_edge_irq,
|
|
IRQ_TYPE_NONE);
|
|
if (ret) {
|
|
dev_err(dev, "Error adding irqchip: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
gpiochip_set_chained_irqchip(chip, irq_chip, irq, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct acpi_device_id int0002_acpi_ids[] = {
|
|
{ "INT0002", 0 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, int0002_acpi_ids);
|
|
|
|
static struct platform_driver int0002_driver = {
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.acpi_match_table = int0002_acpi_ids,
|
|
},
|
|
.probe = int0002_probe,
|
|
};
|
|
|
|
module_platform_driver(int0002_driver);
|
|
|
|
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
|
|
MODULE_DESCRIPTION("Intel INT0002 Virtual GPIO driver");
|
|
MODULE_LICENSE("GPL v2");
|