2380 lines
59 KiB
C
2380 lines
59 KiB
C
/*
|
|
* B53 switch driver main logic
|
|
*
|
|
* Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
|
|
* Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com>
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/export.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_data/b53.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/phylink.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/if_bridge.h>
|
|
#include <net/dsa.h>
|
|
|
|
#include "b53_regs.h"
|
|
#include "b53_priv.h"
|
|
|
|
struct b53_mib_desc {
|
|
u8 size;
|
|
u8 offset;
|
|
const char *name;
|
|
};
|
|
|
|
/* BCM5365 MIB counters */
|
|
static const struct b53_mib_desc b53_mibs_65[] = {
|
|
{ 8, 0x00, "TxOctets" },
|
|
{ 4, 0x08, "TxDropPkts" },
|
|
{ 4, 0x10, "TxBroadcastPkts" },
|
|
{ 4, 0x14, "TxMulticastPkts" },
|
|
{ 4, 0x18, "TxUnicastPkts" },
|
|
{ 4, 0x1c, "TxCollisions" },
|
|
{ 4, 0x20, "TxSingleCollision" },
|
|
{ 4, 0x24, "TxMultipleCollision" },
|
|
{ 4, 0x28, "TxDeferredTransmit" },
|
|
{ 4, 0x2c, "TxLateCollision" },
|
|
{ 4, 0x30, "TxExcessiveCollision" },
|
|
{ 4, 0x38, "TxPausePkts" },
|
|
{ 8, 0x44, "RxOctets" },
|
|
{ 4, 0x4c, "RxUndersizePkts" },
|
|
{ 4, 0x50, "RxPausePkts" },
|
|
{ 4, 0x54, "Pkts64Octets" },
|
|
{ 4, 0x58, "Pkts65to127Octets" },
|
|
{ 4, 0x5c, "Pkts128to255Octets" },
|
|
{ 4, 0x60, "Pkts256to511Octets" },
|
|
{ 4, 0x64, "Pkts512to1023Octets" },
|
|
{ 4, 0x68, "Pkts1024to1522Octets" },
|
|
{ 4, 0x6c, "RxOversizePkts" },
|
|
{ 4, 0x70, "RxJabbers" },
|
|
{ 4, 0x74, "RxAlignmentErrors" },
|
|
{ 4, 0x78, "RxFCSErrors" },
|
|
{ 8, 0x7c, "RxGoodOctets" },
|
|
{ 4, 0x84, "RxDropPkts" },
|
|
{ 4, 0x88, "RxUnicastPkts" },
|
|
{ 4, 0x8c, "RxMulticastPkts" },
|
|
{ 4, 0x90, "RxBroadcastPkts" },
|
|
{ 4, 0x94, "RxSAChanges" },
|
|
{ 4, 0x98, "RxFragments" },
|
|
};
|
|
|
|
#define B53_MIBS_65_SIZE ARRAY_SIZE(b53_mibs_65)
|
|
|
|
/* BCM63xx MIB counters */
|
|
static const struct b53_mib_desc b53_mibs_63xx[] = {
|
|
{ 8, 0x00, "TxOctets" },
|
|
{ 4, 0x08, "TxDropPkts" },
|
|
{ 4, 0x0c, "TxQoSPkts" },
|
|
{ 4, 0x10, "TxBroadcastPkts" },
|
|
{ 4, 0x14, "TxMulticastPkts" },
|
|
{ 4, 0x18, "TxUnicastPkts" },
|
|
{ 4, 0x1c, "TxCollisions" },
|
|
{ 4, 0x20, "TxSingleCollision" },
|
|
{ 4, 0x24, "TxMultipleCollision" },
|
|
{ 4, 0x28, "TxDeferredTransmit" },
|
|
{ 4, 0x2c, "TxLateCollision" },
|
|
{ 4, 0x30, "TxExcessiveCollision" },
|
|
{ 4, 0x38, "TxPausePkts" },
|
|
{ 8, 0x3c, "TxQoSOctets" },
|
|
{ 8, 0x44, "RxOctets" },
|
|
{ 4, 0x4c, "RxUndersizePkts" },
|
|
{ 4, 0x50, "RxPausePkts" },
|
|
{ 4, 0x54, "Pkts64Octets" },
|
|
{ 4, 0x58, "Pkts65to127Octets" },
|
|
{ 4, 0x5c, "Pkts128to255Octets" },
|
|
{ 4, 0x60, "Pkts256to511Octets" },
|
|
{ 4, 0x64, "Pkts512to1023Octets" },
|
|
{ 4, 0x68, "Pkts1024to1522Octets" },
|
|
{ 4, 0x6c, "RxOversizePkts" },
|
|
{ 4, 0x70, "RxJabbers" },
|
|
{ 4, 0x74, "RxAlignmentErrors" },
|
|
{ 4, 0x78, "RxFCSErrors" },
|
|
{ 8, 0x7c, "RxGoodOctets" },
|
|
{ 4, 0x84, "RxDropPkts" },
|
|
{ 4, 0x88, "RxUnicastPkts" },
|
|
{ 4, 0x8c, "RxMulticastPkts" },
|
|
{ 4, 0x90, "RxBroadcastPkts" },
|
|
{ 4, 0x94, "RxSAChanges" },
|
|
{ 4, 0x98, "RxFragments" },
|
|
{ 4, 0xa0, "RxSymbolErrors" },
|
|
{ 4, 0xa4, "RxQoSPkts" },
|
|
{ 8, 0xa8, "RxQoSOctets" },
|
|
{ 4, 0xb0, "Pkts1523to2047Octets" },
|
|
{ 4, 0xb4, "Pkts2048to4095Octets" },
|
|
{ 4, 0xb8, "Pkts4096to8191Octets" },
|
|
{ 4, 0xbc, "Pkts8192to9728Octets" },
|
|
{ 4, 0xc0, "RxDiscarded" },
|
|
};
|
|
|
|
#define B53_MIBS_63XX_SIZE ARRAY_SIZE(b53_mibs_63xx)
|
|
|
|
/* MIB counters */
|
|
static const struct b53_mib_desc b53_mibs[] = {
|
|
{ 8, 0x00, "TxOctets" },
|
|
{ 4, 0x08, "TxDropPkts" },
|
|
{ 4, 0x10, "TxBroadcastPkts" },
|
|
{ 4, 0x14, "TxMulticastPkts" },
|
|
{ 4, 0x18, "TxUnicastPkts" },
|
|
{ 4, 0x1c, "TxCollisions" },
|
|
{ 4, 0x20, "TxSingleCollision" },
|
|
{ 4, 0x24, "TxMultipleCollision" },
|
|
{ 4, 0x28, "TxDeferredTransmit" },
|
|
{ 4, 0x2c, "TxLateCollision" },
|
|
{ 4, 0x30, "TxExcessiveCollision" },
|
|
{ 4, 0x38, "TxPausePkts" },
|
|
{ 8, 0x50, "RxOctets" },
|
|
{ 4, 0x58, "RxUndersizePkts" },
|
|
{ 4, 0x5c, "RxPausePkts" },
|
|
{ 4, 0x60, "Pkts64Octets" },
|
|
{ 4, 0x64, "Pkts65to127Octets" },
|
|
{ 4, 0x68, "Pkts128to255Octets" },
|
|
{ 4, 0x6c, "Pkts256to511Octets" },
|
|
{ 4, 0x70, "Pkts512to1023Octets" },
|
|
{ 4, 0x74, "Pkts1024to1522Octets" },
|
|
{ 4, 0x78, "RxOversizePkts" },
|
|
{ 4, 0x7c, "RxJabbers" },
|
|
{ 4, 0x80, "RxAlignmentErrors" },
|
|
{ 4, 0x84, "RxFCSErrors" },
|
|
{ 8, 0x88, "RxGoodOctets" },
|
|
{ 4, 0x90, "RxDropPkts" },
|
|
{ 4, 0x94, "RxUnicastPkts" },
|
|
{ 4, 0x98, "RxMulticastPkts" },
|
|
{ 4, 0x9c, "RxBroadcastPkts" },
|
|
{ 4, 0xa0, "RxSAChanges" },
|
|
{ 4, 0xa4, "RxFragments" },
|
|
{ 4, 0xa8, "RxJumboPkts" },
|
|
{ 4, 0xac, "RxSymbolErrors" },
|
|
{ 4, 0xc0, "RxDiscarded" },
|
|
};
|
|
|
|
#define B53_MIBS_SIZE ARRAY_SIZE(b53_mibs)
|
|
|
|
static const struct b53_mib_desc b53_mibs_58xx[] = {
|
|
{ 8, 0x00, "TxOctets" },
|
|
{ 4, 0x08, "TxDropPkts" },
|
|
{ 4, 0x0c, "TxQPKTQ0" },
|
|
{ 4, 0x10, "TxBroadcastPkts" },
|
|
{ 4, 0x14, "TxMulticastPkts" },
|
|
{ 4, 0x18, "TxUnicastPKts" },
|
|
{ 4, 0x1c, "TxCollisions" },
|
|
{ 4, 0x20, "TxSingleCollision" },
|
|
{ 4, 0x24, "TxMultipleCollision" },
|
|
{ 4, 0x28, "TxDeferredCollision" },
|
|
{ 4, 0x2c, "TxLateCollision" },
|
|
{ 4, 0x30, "TxExcessiveCollision" },
|
|
{ 4, 0x34, "TxFrameInDisc" },
|
|
{ 4, 0x38, "TxPausePkts" },
|
|
{ 4, 0x3c, "TxQPKTQ1" },
|
|
{ 4, 0x40, "TxQPKTQ2" },
|
|
{ 4, 0x44, "TxQPKTQ3" },
|
|
{ 4, 0x48, "TxQPKTQ4" },
|
|
{ 4, 0x4c, "TxQPKTQ5" },
|
|
{ 8, 0x50, "RxOctets" },
|
|
{ 4, 0x58, "RxUndersizePkts" },
|
|
{ 4, 0x5c, "RxPausePkts" },
|
|
{ 4, 0x60, "RxPkts64Octets" },
|
|
{ 4, 0x64, "RxPkts65to127Octets" },
|
|
{ 4, 0x68, "RxPkts128to255Octets" },
|
|
{ 4, 0x6c, "RxPkts256to511Octets" },
|
|
{ 4, 0x70, "RxPkts512to1023Octets" },
|
|
{ 4, 0x74, "RxPkts1024toMaxPktsOctets" },
|
|
{ 4, 0x78, "RxOversizePkts" },
|
|
{ 4, 0x7c, "RxJabbers" },
|
|
{ 4, 0x80, "RxAlignmentErrors" },
|
|
{ 4, 0x84, "RxFCSErrors" },
|
|
{ 8, 0x88, "RxGoodOctets" },
|
|
{ 4, 0x90, "RxDropPkts" },
|
|
{ 4, 0x94, "RxUnicastPkts" },
|
|
{ 4, 0x98, "RxMulticastPkts" },
|
|
{ 4, 0x9c, "RxBroadcastPkts" },
|
|
{ 4, 0xa0, "RxSAChanges" },
|
|
{ 4, 0xa4, "RxFragments" },
|
|
{ 4, 0xa8, "RxJumboPkt" },
|
|
{ 4, 0xac, "RxSymblErr" },
|
|
{ 4, 0xb0, "InRangeErrCount" },
|
|
{ 4, 0xb4, "OutRangeErrCount" },
|
|
{ 4, 0xb8, "EEELpiEvent" },
|
|
{ 4, 0xbc, "EEELpiDuration" },
|
|
{ 4, 0xc0, "RxDiscard" },
|
|
{ 4, 0xc8, "TxQPKTQ6" },
|
|
{ 4, 0xcc, "TxQPKTQ7" },
|
|
{ 4, 0xd0, "TxPkts64Octets" },
|
|
{ 4, 0xd4, "TxPkts65to127Octets" },
|
|
{ 4, 0xd8, "TxPkts128to255Octets" },
|
|
{ 4, 0xdc, "TxPkts256to511Ocets" },
|
|
{ 4, 0xe0, "TxPkts512to1023Ocets" },
|
|
{ 4, 0xe4, "TxPkts1024toMaxPktOcets" },
|
|
};
|
|
|
|
#define B53_MIBS_58XX_SIZE ARRAY_SIZE(b53_mibs_58xx)
|
|
|
|
static int b53_do_vlan_op(struct b53_device *dev, u8 op)
|
|
{
|
|
unsigned int i;
|
|
|
|
b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op);
|
|
|
|
for (i = 0; i < 10; i++) {
|
|
u8 vta;
|
|
|
|
b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta);
|
|
if (!(vta & VTA_START_CMD))
|
|
return 0;
|
|
|
|
usleep_range(100, 200);
|
|
}
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
static void b53_set_vlan_entry(struct b53_device *dev, u16 vid,
|
|
struct b53_vlan *vlan)
|
|
{
|
|
if (is5325(dev)) {
|
|
u32 entry = 0;
|
|
|
|
if (vlan->members) {
|
|
entry = ((vlan->untag & VA_UNTAG_MASK_25) <<
|
|
VA_UNTAG_S_25) | vlan->members;
|
|
if (dev->core_rev >= 3)
|
|
entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S;
|
|
else
|
|
entry |= VA_VALID_25;
|
|
}
|
|
|
|
b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry);
|
|
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
|
|
VTA_RW_STATE_WR | VTA_RW_OP_EN);
|
|
} else if (is5365(dev)) {
|
|
u16 entry = 0;
|
|
|
|
if (vlan->members)
|
|
entry = ((vlan->untag & VA_UNTAG_MASK_65) <<
|
|
VA_UNTAG_S_65) | vlan->members | VA_VALID_65;
|
|
|
|
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry);
|
|
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
|
|
VTA_RW_STATE_WR | VTA_RW_OP_EN);
|
|
} else {
|
|
b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
|
|
b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2],
|
|
(vlan->untag << VTE_UNTAG_S) | vlan->members);
|
|
|
|
b53_do_vlan_op(dev, VTA_CMD_WRITE);
|
|
}
|
|
|
|
dev_dbg(dev->ds->dev, "VID: %d, members: 0x%04x, untag: 0x%04x\n",
|
|
vid, vlan->members, vlan->untag);
|
|
}
|
|
|
|
static void b53_get_vlan_entry(struct b53_device *dev, u16 vid,
|
|
struct b53_vlan *vlan)
|
|
{
|
|
if (is5325(dev)) {
|
|
u32 entry = 0;
|
|
|
|
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
|
|
VTA_RW_STATE_RD | VTA_RW_OP_EN);
|
|
b53_read32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, &entry);
|
|
|
|
if (dev->core_rev >= 3)
|
|
vlan->valid = !!(entry & VA_VALID_25_R4);
|
|
else
|
|
vlan->valid = !!(entry & VA_VALID_25);
|
|
vlan->members = entry & VA_MEMBER_MASK;
|
|
vlan->untag = (entry >> VA_UNTAG_S_25) & VA_UNTAG_MASK_25;
|
|
|
|
} else if (is5365(dev)) {
|
|
u16 entry = 0;
|
|
|
|
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
|
|
VTA_RW_STATE_WR | VTA_RW_OP_EN);
|
|
b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, &entry);
|
|
|
|
vlan->valid = !!(entry & VA_VALID_65);
|
|
vlan->members = entry & VA_MEMBER_MASK;
|
|
vlan->untag = (entry >> VA_UNTAG_S_65) & VA_UNTAG_MASK_65;
|
|
} else {
|
|
u32 entry = 0;
|
|
|
|
b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
|
|
b53_do_vlan_op(dev, VTA_CMD_READ);
|
|
b53_read32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], &entry);
|
|
vlan->members = entry & VTE_MEMBERS;
|
|
vlan->untag = (entry >> VTE_UNTAG_S) & VTE_MEMBERS;
|
|
vlan->valid = true;
|
|
}
|
|
}
|
|
|
|
static void b53_set_forwarding(struct b53_device *dev, int enable)
|
|
{
|
|
u8 mgmt;
|
|
|
|
b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
|
|
|
|
if (enable)
|
|
mgmt |= SM_SW_FWD_EN;
|
|
else
|
|
mgmt &= ~SM_SW_FWD_EN;
|
|
|
|
b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
|
|
|
|
/* Include IMP port in dumb forwarding mode
|
|
*/
|
|
b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
|
|
mgmt |= B53_MII_DUMB_FWDG_EN;
|
|
b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
|
|
}
|
|
|
|
static void b53_enable_vlan(struct b53_device *dev, bool enable)
|
|
{
|
|
u8 mgmt, vc0, vc1, vc4 = 0, vc5;
|
|
|
|
b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
|
|
b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0);
|
|
b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1);
|
|
|
|
if (is5325(dev) || is5365(dev)) {
|
|
b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
|
|
b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5);
|
|
} else if (is63xx(dev)) {
|
|
b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4);
|
|
b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5);
|
|
} else {
|
|
b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4);
|
|
b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5);
|
|
}
|
|
|
|
mgmt &= ~SM_SW_FWD_MODE;
|
|
|
|
if (enable) {
|
|
vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID;
|
|
vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN;
|
|
vc4 &= ~VC4_ING_VID_CHECK_MASK;
|
|
vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S;
|
|
vc5 |= VC5_DROP_VTABLE_MISS;
|
|
|
|
if (is5325(dev))
|
|
vc0 &= ~VC0_RESERVED_1;
|
|
|
|
if (is5325(dev) || is5365(dev))
|
|
vc1 |= VC1_RX_MCST_TAG_EN;
|
|
|
|
} else {
|
|
vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID);
|
|
vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN);
|
|
vc4 &= ~VC4_ING_VID_CHECK_MASK;
|
|
vc5 &= ~VC5_DROP_VTABLE_MISS;
|
|
|
|
if (is5325(dev) || is5365(dev))
|
|
vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
|
|
else
|
|
vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S;
|
|
|
|
if (is5325(dev) || is5365(dev))
|
|
vc1 &= ~VC1_RX_MCST_TAG_EN;
|
|
}
|
|
|
|
if (!is5325(dev) && !is5365(dev))
|
|
vc5 &= ~VC5_VID_FFF_EN;
|
|
|
|
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0);
|
|
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1);
|
|
|
|
if (is5325(dev) || is5365(dev)) {
|
|
/* enable the high 8 bit vid check on 5325 */
|
|
if (is5325(dev) && enable)
|
|
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3,
|
|
VC3_HIGH_8BIT_EN);
|
|
else
|
|
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
|
|
|
|
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4);
|
|
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5);
|
|
} else if (is63xx(dev)) {
|
|
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0);
|
|
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4);
|
|
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5);
|
|
} else {
|
|
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
|
|
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4);
|
|
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5);
|
|
}
|
|
|
|
b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
|
|
}
|
|
|
|
static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100)
|
|
{
|
|
u32 port_mask = 0;
|
|
u16 max_size = JMS_MIN_SIZE;
|
|
|
|
if (is5325(dev) || is5365(dev))
|
|
return -EINVAL;
|
|
|
|
if (enable) {
|
|
port_mask = dev->enabled_ports;
|
|
max_size = JMS_MAX_SIZE;
|
|
if (allow_10_100)
|
|
port_mask |= JPM_10_100_JUMBO_EN;
|
|
}
|
|
|
|
b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask);
|
|
return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size);
|
|
}
|
|
|
|
static int b53_flush_arl(struct b53_device *dev, u8 mask)
|
|
{
|
|
unsigned int i;
|
|
|
|
b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
|
|
FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask);
|
|
|
|
for (i = 0; i < 10; i++) {
|
|
u8 fast_age_ctrl;
|
|
|
|
b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
|
|
&fast_age_ctrl);
|
|
|
|
if (!(fast_age_ctrl & FAST_AGE_DONE))
|
|
goto out;
|
|
|
|
msleep(1);
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
out:
|
|
/* Only age dynamic entries (default behavior) */
|
|
b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC);
|
|
return 0;
|
|
}
|
|
|
|
static int b53_fast_age_port(struct b53_device *dev, int port)
|
|
{
|
|
b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port);
|
|
|
|
return b53_flush_arl(dev, FAST_AGE_PORT);
|
|
}
|
|
|
|
static int b53_fast_age_vlan(struct b53_device *dev, u16 vid)
|
|
{
|
|
b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid);
|
|
|
|
return b53_flush_arl(dev, FAST_AGE_VLAN);
|
|
}
|
|
|
|
void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
unsigned int i;
|
|
u16 pvlan;
|
|
|
|
/* Enable the IMP port to be in the same VLAN as the other ports
|
|
* on a per-port basis such that we only have Port i and IMP in
|
|
* the same VLAN.
|
|
*/
|
|
b53_for_each_port(dev, i) {
|
|
b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &pvlan);
|
|
pvlan |= BIT(cpu_port);
|
|
b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(b53_imp_vlan_setup);
|
|
|
|
int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
unsigned int cpu_port = ds->ports[port].cpu_dp->index;
|
|
int ret = 0;
|
|
u16 pvlan;
|
|
|
|
if (dev->ops->irq_enable)
|
|
ret = dev->ops->irq_enable(dev, port);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Clear the Rx and Tx disable bits and set to no spanning tree */
|
|
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0);
|
|
|
|
/* Set this port, and only this one to be in the default VLAN,
|
|
* if member of a bridge, restore its membership prior to
|
|
* bringing down this port.
|
|
*/
|
|
b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
|
|
pvlan &= ~0x1ff;
|
|
pvlan |= BIT(port);
|
|
pvlan |= dev->ports[port].vlan_ctl_mask;
|
|
b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
|
|
|
|
b53_imp_vlan_setup(ds, cpu_port);
|
|
|
|
/* If EEE was enabled, restore it */
|
|
if (dev->ports[port].eee.eee_enabled)
|
|
b53_eee_enable_set(ds, port, true);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(b53_enable_port);
|
|
|
|
void b53_disable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
u8 reg;
|
|
|
|
/* Disable Tx/Rx for the port */
|
|
b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), ®);
|
|
reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
|
|
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
|
|
|
|
if (dev->ops->irq_disable)
|
|
dev->ops->irq_disable(dev, port);
|
|
}
|
|
EXPORT_SYMBOL(b53_disable_port);
|
|
|
|
void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
|
|
{
|
|
bool tag_en = !(ds->ops->get_tag_protocol(ds, port) ==
|
|
DSA_TAG_PROTO_NONE);
|
|
struct b53_device *dev = ds->priv;
|
|
u8 hdr_ctl, val;
|
|
u16 reg;
|
|
|
|
/* Resolve which bit controls the Broadcom tag */
|
|
switch (port) {
|
|
case 8:
|
|
val = BRCM_HDR_P8_EN;
|
|
break;
|
|
case 7:
|
|
val = BRCM_HDR_P7_EN;
|
|
break;
|
|
case 5:
|
|
val = BRCM_HDR_P5_EN;
|
|
break;
|
|
default:
|
|
val = 0;
|
|
break;
|
|
}
|
|
|
|
/* Enable Broadcom tags for IMP port */
|
|
b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl);
|
|
if (tag_en)
|
|
hdr_ctl |= val;
|
|
else
|
|
hdr_ctl &= ~val;
|
|
b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl);
|
|
|
|
/* Registers below are only accessible on newer devices */
|
|
if (!is58xx(dev))
|
|
return;
|
|
|
|
/* Enable reception Broadcom tag for CPU TX (switch RX) to
|
|
* allow us to tag outgoing frames
|
|
*/
|
|
b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, ®);
|
|
if (tag_en)
|
|
reg &= ~BIT(port);
|
|
else
|
|
reg |= BIT(port);
|
|
b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg);
|
|
|
|
/* Enable transmission of Broadcom tags from the switch (CPU RX) to
|
|
* allow delivering frames to the per-port net_devices
|
|
*/
|
|
b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, ®);
|
|
if (tag_en)
|
|
reg &= ~BIT(port);
|
|
else
|
|
reg |= BIT(port);
|
|
b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg);
|
|
}
|
|
EXPORT_SYMBOL(b53_brcm_hdr_setup);
|
|
|
|
static void b53_enable_cpu_port(struct b53_device *dev, int port)
|
|
{
|
|
u8 port_ctrl;
|
|
|
|
/* BCM5325 CPU port is at 8 */
|
|
if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25)
|
|
port = B53_CPU_PORT;
|
|
|
|
port_ctrl = PORT_CTRL_RX_BCST_EN |
|
|
PORT_CTRL_RX_MCST_EN |
|
|
PORT_CTRL_RX_UCST_EN;
|
|
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl);
|
|
|
|
b53_brcm_hdr_setup(dev->ds, port);
|
|
}
|
|
|
|
static void b53_enable_mib(struct b53_device *dev)
|
|
{
|
|
u8 gc;
|
|
|
|
b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
|
|
gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN);
|
|
b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc);
|
|
}
|
|
|
|
int b53_configure_vlan(struct dsa_switch *ds)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
struct b53_vlan vl = { 0 };
|
|
int i;
|
|
|
|
/* clear all vlan entries */
|
|
if (is5325(dev) || is5365(dev)) {
|
|
for (i = 1; i < dev->num_vlans; i++)
|
|
b53_set_vlan_entry(dev, i, &vl);
|
|
} else {
|
|
b53_do_vlan_op(dev, VTA_CMD_CLEAR);
|
|
}
|
|
|
|
b53_enable_vlan(dev, false);
|
|
|
|
b53_for_each_port(dev, i)
|
|
b53_write16(dev, B53_VLAN_PAGE,
|
|
B53_VLAN_PORT_DEF_TAG(i), 1);
|
|
|
|
if (!is5325(dev) && !is5365(dev))
|
|
b53_set_jumbo(dev, dev->enable_jumbo, false);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(b53_configure_vlan);
|
|
|
|
static void b53_switch_reset_gpio(struct b53_device *dev)
|
|
{
|
|
int gpio = dev->reset_gpio;
|
|
|
|
if (gpio < 0)
|
|
return;
|
|
|
|
/* Reset sequence: RESET low(50ms)->high(20ms)
|
|
*/
|
|
gpio_set_value(gpio, 0);
|
|
mdelay(50);
|
|
|
|
gpio_set_value(gpio, 1);
|
|
mdelay(20);
|
|
|
|
dev->current_page = 0xff;
|
|
}
|
|
|
|
static int b53_switch_reset(struct b53_device *dev)
|
|
{
|
|
unsigned int timeout = 1000;
|
|
u8 mgmt, reg;
|
|
|
|
b53_switch_reset_gpio(dev);
|
|
|
|
if (is539x(dev)) {
|
|
b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83);
|
|
b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00);
|
|
}
|
|
|
|
/* This is specific to 58xx devices here, do not use is58xx() which
|
|
* covers the larger Starfigther 2 family, including 7445/7278 which
|
|
* still use this driver as a library and need to perform the reset
|
|
* earlier.
|
|
*/
|
|
if (dev->chip_id == BCM58XX_DEVICE_ID ||
|
|
dev->chip_id == BCM583XX_DEVICE_ID) {
|
|
b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®);
|
|
reg |= SW_RST | EN_SW_RST | EN_CH_RST;
|
|
b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
|
|
|
|
do {
|
|
b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®);
|
|
if (!(reg & SW_RST))
|
|
break;
|
|
|
|
usleep_range(1000, 2000);
|
|
} while (timeout-- > 0);
|
|
|
|
if (timeout == 0)
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
|
|
|
|
if (!(mgmt & SM_SW_FWD_EN)) {
|
|
mgmt &= ~SM_SW_FWD_MODE;
|
|
mgmt |= SM_SW_FWD_EN;
|
|
|
|
b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
|
|
b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
|
|
|
|
if (!(mgmt & SM_SW_FWD_EN)) {
|
|
dev_err(dev->dev, "Failed to enable switch!\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
b53_enable_mib(dev);
|
|
|
|
return b53_flush_arl(dev, FAST_AGE_STATIC);
|
|
}
|
|
|
|
static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg)
|
|
{
|
|
struct b53_device *priv = ds->priv;
|
|
u16 value = 0;
|
|
int ret;
|
|
|
|
if (priv->ops->phy_read16)
|
|
ret = priv->ops->phy_read16(priv, addr, reg, &value);
|
|
else
|
|
ret = b53_read16(priv, B53_PORT_MII_PAGE(addr),
|
|
reg * 2, &value);
|
|
|
|
return ret ? ret : value;
|
|
}
|
|
|
|
static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
|
|
{
|
|
struct b53_device *priv = ds->priv;
|
|
|
|
if (priv->ops->phy_write16)
|
|
return priv->ops->phy_write16(priv, addr, reg, val);
|
|
|
|
return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val);
|
|
}
|
|
|
|
static int b53_reset_switch(struct b53_device *priv)
|
|
{
|
|
/* reset vlans */
|
|
priv->enable_jumbo = false;
|
|
|
|
memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans);
|
|
memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports);
|
|
|
|
priv->serdes_lane = B53_INVALID_LANE;
|
|
|
|
return b53_switch_reset(priv);
|
|
}
|
|
|
|
static int b53_apply_config(struct b53_device *priv)
|
|
{
|
|
/* disable switching */
|
|
b53_set_forwarding(priv, 0);
|
|
|
|
b53_configure_vlan(priv->ds);
|
|
|
|
/* enable switching */
|
|
b53_set_forwarding(priv, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void b53_reset_mib(struct b53_device *priv)
|
|
{
|
|
u8 gc;
|
|
|
|
b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
|
|
|
|
b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB);
|
|
msleep(1);
|
|
b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB);
|
|
msleep(1);
|
|
}
|
|
|
|
static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev)
|
|
{
|
|
if (is5365(dev))
|
|
return b53_mibs_65;
|
|
else if (is63xx(dev))
|
|
return b53_mibs_63xx;
|
|
else if (is58xx(dev))
|
|
return b53_mibs_58xx;
|
|
else
|
|
return b53_mibs;
|
|
}
|
|
|
|
static unsigned int b53_get_mib_size(struct b53_device *dev)
|
|
{
|
|
if (is5365(dev))
|
|
return B53_MIBS_65_SIZE;
|
|
else if (is63xx(dev))
|
|
return B53_MIBS_63XX_SIZE;
|
|
else if (is58xx(dev))
|
|
return B53_MIBS_58XX_SIZE;
|
|
else
|
|
return B53_MIBS_SIZE;
|
|
}
|
|
|
|
static struct phy_device *b53_get_phy_device(struct dsa_switch *ds, int port)
|
|
{
|
|
/* These ports typically do not have built-in PHYs */
|
|
switch (port) {
|
|
case B53_CPU_PORT_25:
|
|
case 7:
|
|
case B53_CPU_PORT:
|
|
return NULL;
|
|
}
|
|
|
|
return mdiobus_get_phy(ds->slave_mii_bus, port);
|
|
}
|
|
|
|
void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset,
|
|
uint8_t *data)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
const struct b53_mib_desc *mibs = b53_get_mib(dev);
|
|
unsigned int mib_size = b53_get_mib_size(dev);
|
|
struct phy_device *phydev;
|
|
unsigned int i;
|
|
|
|
if (stringset == ETH_SS_STATS) {
|
|
for (i = 0; i < mib_size; i++)
|
|
strlcpy(data + i * ETH_GSTRING_LEN,
|
|
mibs[i].name, ETH_GSTRING_LEN);
|
|
} else if (stringset == ETH_SS_PHY_STATS) {
|
|
phydev = b53_get_phy_device(ds, port);
|
|
if (!phydev)
|
|
return;
|
|
|
|
phy_ethtool_get_strings(phydev, data);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(b53_get_strings);
|
|
|
|
void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
const struct b53_mib_desc *mibs = b53_get_mib(dev);
|
|
unsigned int mib_size = b53_get_mib_size(dev);
|
|
const struct b53_mib_desc *s;
|
|
unsigned int i;
|
|
u64 val = 0;
|
|
|
|
if (is5365(dev) && port == 5)
|
|
port = 8;
|
|
|
|
mutex_lock(&dev->stats_mutex);
|
|
|
|
for (i = 0; i < mib_size; i++) {
|
|
s = &mibs[i];
|
|
|
|
if (s->size == 8) {
|
|
b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val);
|
|
} else {
|
|
u32 val32;
|
|
|
|
b53_read32(dev, B53_MIB_PAGE(port), s->offset,
|
|
&val32);
|
|
val = val32;
|
|
}
|
|
data[i] = (u64)val;
|
|
}
|
|
|
|
mutex_unlock(&dev->stats_mutex);
|
|
}
|
|
EXPORT_SYMBOL(b53_get_ethtool_stats);
|
|
|
|
void b53_get_ethtool_phy_stats(struct dsa_switch *ds, int port, uint64_t *data)
|
|
{
|
|
struct phy_device *phydev;
|
|
|
|
phydev = b53_get_phy_device(ds, port);
|
|
if (!phydev)
|
|
return;
|
|
|
|
phy_ethtool_get_stats(phydev, NULL, data);
|
|
}
|
|
EXPORT_SYMBOL(b53_get_ethtool_phy_stats);
|
|
|
|
int b53_get_sset_count(struct dsa_switch *ds, int port, int sset)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
struct phy_device *phydev;
|
|
|
|
if (sset == ETH_SS_STATS) {
|
|
return b53_get_mib_size(dev);
|
|
} else if (sset == ETH_SS_PHY_STATS) {
|
|
phydev = b53_get_phy_device(ds, port);
|
|
if (!phydev)
|
|
return 0;
|
|
|
|
return phy_ethtool_get_sset_count(phydev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(b53_get_sset_count);
|
|
|
|
static int b53_setup(struct dsa_switch *ds)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
unsigned int port;
|
|
int ret;
|
|
|
|
ret = b53_reset_switch(dev);
|
|
if (ret) {
|
|
dev_err(ds->dev, "failed to reset switch\n");
|
|
return ret;
|
|
}
|
|
|
|
b53_reset_mib(dev);
|
|
|
|
ret = b53_apply_config(dev);
|
|
if (ret)
|
|
dev_err(ds->dev, "failed to apply configuration\n");
|
|
|
|
/* Configure IMP/CPU port, disable unused ports. Enabled
|
|
* ports will be configured with .port_enable
|
|
*/
|
|
for (port = 0; port < dev->num_ports; port++) {
|
|
if (dsa_is_cpu_port(ds, port))
|
|
b53_enable_cpu_port(dev, port);
|
|
else if (dsa_is_unused_port(ds, port))
|
|
b53_disable_port(ds, port, NULL);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void b53_force_link(struct b53_device *dev, int port, int link)
|
|
{
|
|
u8 reg, val, off;
|
|
|
|
/* Override the port settings */
|
|
if (port == dev->cpu_port) {
|
|
off = B53_PORT_OVERRIDE_CTRL;
|
|
val = PORT_OVERRIDE_EN;
|
|
} else {
|
|
off = B53_GMII_PORT_OVERRIDE_CTRL(port);
|
|
val = GMII_PO_EN;
|
|
}
|
|
|
|
b53_read8(dev, B53_CTRL_PAGE, off, ®);
|
|
reg |= val;
|
|
if (link)
|
|
reg |= PORT_OVERRIDE_LINK;
|
|
else
|
|
reg &= ~PORT_OVERRIDE_LINK;
|
|
b53_write8(dev, B53_CTRL_PAGE, off, reg);
|
|
}
|
|
|
|
static void b53_force_port_config(struct b53_device *dev, int port,
|
|
int speed, int duplex, int pause)
|
|
{
|
|
u8 reg, val, off;
|
|
|
|
/* Override the port settings */
|
|
if (port == dev->cpu_port) {
|
|
off = B53_PORT_OVERRIDE_CTRL;
|
|
val = PORT_OVERRIDE_EN;
|
|
} else {
|
|
off = B53_GMII_PORT_OVERRIDE_CTRL(port);
|
|
val = GMII_PO_EN;
|
|
}
|
|
|
|
b53_read8(dev, B53_CTRL_PAGE, off, ®);
|
|
reg |= val;
|
|
if (duplex == DUPLEX_FULL)
|
|
reg |= PORT_OVERRIDE_FULL_DUPLEX;
|
|
else
|
|
reg &= ~PORT_OVERRIDE_FULL_DUPLEX;
|
|
|
|
switch (speed) {
|
|
case 2000:
|
|
reg |= PORT_OVERRIDE_SPEED_2000M;
|
|
/* fallthrough */
|
|
case SPEED_1000:
|
|
reg |= PORT_OVERRIDE_SPEED_1000M;
|
|
break;
|
|
case SPEED_100:
|
|
reg |= PORT_OVERRIDE_SPEED_100M;
|
|
break;
|
|
case SPEED_10:
|
|
reg |= PORT_OVERRIDE_SPEED_10M;
|
|
break;
|
|
default:
|
|
dev_err(dev->dev, "unknown speed: %d\n", speed);
|
|
return;
|
|
}
|
|
|
|
if (pause & MLO_PAUSE_RX)
|
|
reg |= PORT_OVERRIDE_RX_FLOW;
|
|
if (pause & MLO_PAUSE_TX)
|
|
reg |= PORT_OVERRIDE_TX_FLOW;
|
|
|
|
b53_write8(dev, B53_CTRL_PAGE, off, reg);
|
|
}
|
|
|
|
static void b53_adjust_link(struct dsa_switch *ds, int port,
|
|
struct phy_device *phydev)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
struct ethtool_eee *p = &dev->ports[port].eee;
|
|
u8 rgmii_ctrl = 0, reg = 0, off;
|
|
int pause = 0;
|
|
|
|
if (!phy_is_pseudo_fixed_link(phydev))
|
|
return;
|
|
|
|
/* Enable flow control on BCM5301x's CPU port */
|
|
if (is5301x(dev) && port == dev->cpu_port)
|
|
pause = MLO_PAUSE_TXRX_MASK;
|
|
|
|
if (phydev->pause) {
|
|
if (phydev->asym_pause)
|
|
pause |= MLO_PAUSE_TX;
|
|
pause |= MLO_PAUSE_RX;
|
|
}
|
|
|
|
b53_force_port_config(dev, port, phydev->speed, phydev->duplex, pause);
|
|
b53_force_link(dev, port, phydev->link);
|
|
|
|
if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
|
|
if (port == 8)
|
|
off = B53_RGMII_CTRL_IMP;
|
|
else
|
|
off = B53_RGMII_CTRL_P(port);
|
|
|
|
/* Configure the port RGMII clock delay by DLL disabled and
|
|
* tx_clk aligned timing (restoring to reset defaults)
|
|
*/
|
|
b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
|
|
rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC |
|
|
RGMII_CTRL_TIMING_SEL);
|
|
|
|
/* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
|
|
* sure that we enable the port TX clock internal delay to
|
|
* account for this internal delay that is inserted, otherwise
|
|
* the switch won't be able to receive correctly.
|
|
*
|
|
* PHY_INTERFACE_MODE_RGMII means that we are not introducing
|
|
* any delay neither on transmission nor reception, so the
|
|
* BCM53125 must also be configured accordingly to account for
|
|
* the lack of delay and introduce
|
|
*
|
|
* The BCM53125 switch has its RX clock and TX clock control
|
|
* swapped, hence the reason why we modify the TX clock path in
|
|
* the "RGMII" case
|
|
*/
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
|
|
rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
|
|
rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
|
|
rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
|
|
b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
|
|
|
|
dev_info(ds->dev, "Configured port %d for %s\n", port,
|
|
phy_modes(phydev->interface));
|
|
}
|
|
|
|
/* configure MII port if necessary */
|
|
if (is5325(dev)) {
|
|
b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
|
|
®);
|
|
|
|
/* reverse mii needs to be enabled */
|
|
if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
|
|
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
|
|
reg | PORT_OVERRIDE_RV_MII_25);
|
|
b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
|
|
®);
|
|
|
|
if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
|
|
dev_err(ds->dev,
|
|
"Failed to enable reverse MII mode\n");
|
|
return;
|
|
}
|
|
}
|
|
} else if (is5301x(dev)) {
|
|
if (port != dev->cpu_port) {
|
|
b53_force_port_config(dev, dev->cpu_port, 2000,
|
|
DUPLEX_FULL, MLO_PAUSE_TXRX_MASK);
|
|
b53_force_link(dev, dev->cpu_port, 1);
|
|
}
|
|
}
|
|
|
|
/* Re-negotiate EEE if it was enabled already */
|
|
p->eee_enabled = b53_eee_init(ds, port, phydev);
|
|
}
|
|
|
|
void b53_port_event(struct dsa_switch *ds, int port)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
bool link;
|
|
u16 sts;
|
|
|
|
b53_read16(dev, B53_STAT_PAGE, B53_LINK_STAT, &sts);
|
|
link = !!(sts & BIT(port));
|
|
dsa_port_phylink_mac_change(ds, port, link);
|
|
}
|
|
EXPORT_SYMBOL(b53_port_event);
|
|
|
|
void b53_phylink_validate(struct dsa_switch *ds, int port,
|
|
unsigned long *supported,
|
|
struct phylink_link_state *state)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
|
|
|
|
if (dev->ops->serdes_phylink_validate)
|
|
dev->ops->serdes_phylink_validate(dev, port, mask, state);
|
|
|
|
/* Allow all the expected bits */
|
|
phylink_set(mask, Autoneg);
|
|
phylink_set_port_modes(mask);
|
|
phylink_set(mask, Pause);
|
|
phylink_set(mask, Asym_Pause);
|
|
|
|
/* With the exclusion of 5325/5365, MII, Reverse MII and 802.3z, we
|
|
* support Gigabit, including Half duplex.
|
|
*/
|
|
if (state->interface != PHY_INTERFACE_MODE_MII &&
|
|
state->interface != PHY_INTERFACE_MODE_REVMII &&
|
|
!phy_interface_mode_is_8023z(state->interface) &&
|
|
!(is5325(dev) || is5365(dev))) {
|
|
phylink_set(mask, 1000baseT_Full);
|
|
phylink_set(mask, 1000baseT_Half);
|
|
}
|
|
|
|
if (!phy_interface_mode_is_8023z(state->interface)) {
|
|
phylink_set(mask, 10baseT_Half);
|
|
phylink_set(mask, 10baseT_Full);
|
|
phylink_set(mask, 100baseT_Half);
|
|
phylink_set(mask, 100baseT_Full);
|
|
}
|
|
|
|
bitmap_and(supported, supported, mask,
|
|
__ETHTOOL_LINK_MODE_MASK_NBITS);
|
|
bitmap_and(state->advertising, state->advertising, mask,
|
|
__ETHTOOL_LINK_MODE_MASK_NBITS);
|
|
|
|
phylink_helper_basex_speed(state);
|
|
}
|
|
EXPORT_SYMBOL(b53_phylink_validate);
|
|
|
|
int b53_phylink_mac_link_state(struct dsa_switch *ds, int port,
|
|
struct phylink_link_state *state)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
int ret = -EOPNOTSUPP;
|
|
|
|
if ((phy_interface_mode_is_8023z(state->interface) ||
|
|
state->interface == PHY_INTERFACE_MODE_SGMII) &&
|
|
dev->ops->serdes_link_state)
|
|
ret = dev->ops->serdes_link_state(dev, port, state);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(b53_phylink_mac_link_state);
|
|
|
|
void b53_phylink_mac_config(struct dsa_switch *ds, int port,
|
|
unsigned int mode,
|
|
const struct phylink_link_state *state)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
|
|
if (mode == MLO_AN_PHY)
|
|
return;
|
|
|
|
if (mode == MLO_AN_FIXED) {
|
|
b53_force_port_config(dev, port, state->speed,
|
|
state->duplex, state->pause);
|
|
return;
|
|
}
|
|
|
|
if ((phy_interface_mode_is_8023z(state->interface) ||
|
|
state->interface == PHY_INTERFACE_MODE_SGMII) &&
|
|
dev->ops->serdes_config)
|
|
dev->ops->serdes_config(dev, port, mode, state);
|
|
}
|
|
EXPORT_SYMBOL(b53_phylink_mac_config);
|
|
|
|
void b53_phylink_mac_an_restart(struct dsa_switch *ds, int port)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
|
|
if (dev->ops->serdes_an_restart)
|
|
dev->ops->serdes_an_restart(dev, port);
|
|
}
|
|
EXPORT_SYMBOL(b53_phylink_mac_an_restart);
|
|
|
|
void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
|
|
unsigned int mode,
|
|
phy_interface_t interface)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
|
|
if (mode == MLO_AN_PHY)
|
|
return;
|
|
|
|
if (mode == MLO_AN_FIXED) {
|
|
b53_force_link(dev, port, false);
|
|
return;
|
|
}
|
|
|
|
if (phy_interface_mode_is_8023z(interface) &&
|
|
dev->ops->serdes_link_set)
|
|
dev->ops->serdes_link_set(dev, port, mode, interface, false);
|
|
}
|
|
EXPORT_SYMBOL(b53_phylink_mac_link_down);
|
|
|
|
void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
|
|
unsigned int mode,
|
|
phy_interface_t interface,
|
|
struct phy_device *phydev)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
|
|
if (mode == MLO_AN_PHY)
|
|
return;
|
|
|
|
if (mode == MLO_AN_FIXED) {
|
|
b53_force_link(dev, port, true);
|
|
return;
|
|
}
|
|
|
|
if (phy_interface_mode_is_8023z(interface) &&
|
|
dev->ops->serdes_link_set)
|
|
dev->ops->serdes_link_set(dev, port, mode, interface, true);
|
|
}
|
|
EXPORT_SYMBOL(b53_phylink_mac_link_up);
|
|
|
|
int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
|
|
{
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(b53_vlan_filtering);
|
|
|
|
int b53_vlan_prepare(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_vlan *vlan)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
|
|
if ((is5325(dev) || is5365(dev)) && vlan->vid_begin == 0)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (vlan->vid_end > dev->num_vlans)
|
|
return -ERANGE;
|
|
|
|
b53_enable_vlan(dev, true);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(b53_vlan_prepare);
|
|
|
|
void b53_vlan_add(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_vlan *vlan)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
|
|
bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
|
|
struct b53_vlan *vl;
|
|
u16 vid;
|
|
|
|
for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
|
|
vl = &dev->vlans[vid];
|
|
|
|
b53_get_vlan_entry(dev, vid, vl);
|
|
|
|
vl->members |= BIT(port);
|
|
if (untagged && !dsa_is_cpu_port(ds, port))
|
|
vl->untag |= BIT(port);
|
|
else
|
|
vl->untag &= ~BIT(port);
|
|
|
|
b53_set_vlan_entry(dev, vid, vl);
|
|
b53_fast_age_vlan(dev, vid);
|
|
}
|
|
|
|
if (pvid) {
|
|
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
|
|
vlan->vid_end);
|
|
b53_fast_age_vlan(dev, vid);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(b53_vlan_add);
|
|
|
|
int b53_vlan_del(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_vlan *vlan)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
|
|
struct b53_vlan *vl;
|
|
u16 vid;
|
|
u16 pvid;
|
|
|
|
b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid);
|
|
|
|
for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
|
|
vl = &dev->vlans[vid];
|
|
|
|
b53_get_vlan_entry(dev, vid, vl);
|
|
|
|
vl->members &= ~BIT(port);
|
|
|
|
if (pvid == vid) {
|
|
if (is5325(dev) || is5365(dev))
|
|
pvid = 1;
|
|
else
|
|
pvid = 0;
|
|
}
|
|
|
|
if (untagged && !dsa_is_cpu_port(ds, port))
|
|
vl->untag &= ~(BIT(port));
|
|
|
|
b53_set_vlan_entry(dev, vid, vl);
|
|
b53_fast_age_vlan(dev, vid);
|
|
}
|
|
|
|
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid);
|
|
b53_fast_age_vlan(dev, pvid);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(b53_vlan_del);
|
|
|
|
/* Address Resolution Logic routines */
|
|
static int b53_arl_op_wait(struct b53_device *dev)
|
|
{
|
|
unsigned int timeout = 10;
|
|
u8 reg;
|
|
|
|
do {
|
|
b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, ®);
|
|
if (!(reg & ARLTBL_START_DONE))
|
|
return 0;
|
|
|
|
usleep_range(1000, 2000);
|
|
} while (timeout--);
|
|
|
|
dev_warn(dev->dev, "timeout waiting for ARL to finish: 0x%02x\n", reg);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int b53_arl_rw_op(struct b53_device *dev, unsigned int op)
|
|
{
|
|
u8 reg;
|
|
|
|
if (op > ARLTBL_RW)
|
|
return -EINVAL;
|
|
|
|
b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, ®);
|
|
reg |= ARLTBL_START_DONE;
|
|
if (op)
|
|
reg |= ARLTBL_RW;
|
|
else
|
|
reg &= ~ARLTBL_RW;
|
|
b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg);
|
|
|
|
return b53_arl_op_wait(dev);
|
|
}
|
|
|
|
static int b53_arl_read(struct b53_device *dev, u64 mac,
|
|
u16 vid, struct b53_arl_entry *ent, u8 *idx,
|
|
bool is_valid)
|
|
{
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
ret = b53_arl_op_wait(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Read the bins */
|
|
for (i = 0; i < dev->num_arl_entries; i++) {
|
|
u64 mac_vid;
|
|
u32 fwd_entry;
|
|
|
|
b53_read64(dev, B53_ARLIO_PAGE,
|
|
B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid);
|
|
b53_read32(dev, B53_ARLIO_PAGE,
|
|
B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
|
|
b53_arl_to_entry(ent, mac_vid, fwd_entry);
|
|
|
|
if (!(fwd_entry & ARLTBL_VALID))
|
|
continue;
|
|
if ((mac_vid & ARLTBL_MAC_MASK) != mac)
|
|
continue;
|
|
*idx = i;
|
|
}
|
|
|
|
return -ENOENT;
|
|
}
|
|
|
|
static int b53_arl_op(struct b53_device *dev, int op, int port,
|
|
const unsigned char *addr, u16 vid, bool is_valid)
|
|
{
|
|
struct b53_arl_entry ent;
|
|
u32 fwd_entry;
|
|
u64 mac, mac_vid = 0;
|
|
u8 idx = 0;
|
|
int ret;
|
|
|
|
/* Convert the array into a 64-bit MAC */
|
|
mac = ether_addr_to_u64(addr);
|
|
|
|
/* Perform a read for the given MAC and VID */
|
|
b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac);
|
|
b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
|
|
|
|
/* Issue a read operation for this MAC */
|
|
ret = b53_arl_rw_op(dev, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = b53_arl_read(dev, mac, vid, &ent, &idx, is_valid);
|
|
/* If this is a read, just finish now */
|
|
if (op)
|
|
return ret;
|
|
|
|
/* We could not find a matching MAC, so reset to a new entry */
|
|
if (ret) {
|
|
fwd_entry = 0;
|
|
idx = 1;
|
|
}
|
|
|
|
memset(&ent, 0, sizeof(ent));
|
|
ent.port = port;
|
|
ent.is_valid = is_valid;
|
|
ent.vid = vid;
|
|
ent.is_static = true;
|
|
memcpy(ent.mac, addr, ETH_ALEN);
|
|
b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
|
|
|
|
b53_write64(dev, B53_ARLIO_PAGE,
|
|
B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid);
|
|
b53_write32(dev, B53_ARLIO_PAGE,
|
|
B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
|
|
|
|
return b53_arl_rw_op(dev, 0);
|
|
}
|
|
|
|
int b53_fdb_add(struct dsa_switch *ds, int port,
|
|
const unsigned char *addr, u16 vid)
|
|
{
|
|
struct b53_device *priv = ds->priv;
|
|
|
|
/* 5325 and 5365 require some more massaging, but could
|
|
* be supported eventually
|
|
*/
|
|
if (is5325(priv) || is5365(priv))
|
|
return -EOPNOTSUPP;
|
|
|
|
return b53_arl_op(priv, 0, port, addr, vid, true);
|
|
}
|
|
EXPORT_SYMBOL(b53_fdb_add);
|
|
|
|
int b53_fdb_del(struct dsa_switch *ds, int port,
|
|
const unsigned char *addr, u16 vid)
|
|
{
|
|
struct b53_device *priv = ds->priv;
|
|
|
|
return b53_arl_op(priv, 0, port, addr, vid, false);
|
|
}
|
|
EXPORT_SYMBOL(b53_fdb_del);
|
|
|
|
static int b53_arl_search_wait(struct b53_device *dev)
|
|
{
|
|
unsigned int timeout = 1000;
|
|
u8 reg;
|
|
|
|
do {
|
|
b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, ®);
|
|
if (!(reg & ARL_SRCH_STDN))
|
|
return 0;
|
|
|
|
if (reg & ARL_SRCH_VLID)
|
|
return 0;
|
|
|
|
usleep_range(1000, 2000);
|
|
} while (timeout--);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void b53_arl_search_rd(struct b53_device *dev, u8 idx,
|
|
struct b53_arl_entry *ent)
|
|
{
|
|
u64 mac_vid;
|
|
u32 fwd_entry;
|
|
|
|
b53_read64(dev, B53_ARLIO_PAGE,
|
|
B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid);
|
|
b53_read32(dev, B53_ARLIO_PAGE,
|
|
B53_ARL_SRCH_RSTL(idx), &fwd_entry);
|
|
b53_arl_to_entry(ent, mac_vid, fwd_entry);
|
|
}
|
|
|
|
static int b53_fdb_copy(int port, const struct b53_arl_entry *ent,
|
|
dsa_fdb_dump_cb_t *cb, void *data)
|
|
{
|
|
if (!ent->is_valid)
|
|
return 0;
|
|
|
|
if (port != ent->port)
|
|
return 0;
|
|
|
|
return cb(ent->mac, ent->vid, ent->is_static, data);
|
|
}
|
|
|
|
int b53_fdb_dump(struct dsa_switch *ds, int port,
|
|
dsa_fdb_dump_cb_t *cb, void *data)
|
|
{
|
|
struct b53_device *priv = ds->priv;
|
|
struct b53_arl_entry results[2];
|
|
unsigned int count = 0;
|
|
int ret;
|
|
u8 reg;
|
|
|
|
/* Start search operation */
|
|
reg = ARL_SRCH_STDN;
|
|
b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg);
|
|
|
|
do {
|
|
ret = b53_arl_search_wait(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
b53_arl_search_rd(priv, 0, &results[0]);
|
|
ret = b53_fdb_copy(port, &results[0], cb, data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (priv->num_arl_entries > 2) {
|
|
b53_arl_search_rd(priv, 1, &results[1]);
|
|
ret = b53_fdb_copy(port, &results[1], cb, data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!results[0].is_valid && !results[1].is_valid)
|
|
break;
|
|
}
|
|
|
|
} while (count++ < 1024);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(b53_fdb_dump);
|
|
|
|
int b53_br_join(struct dsa_switch *ds, int port, struct net_device *br)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
s8 cpu_port = ds->ports[port].cpu_dp->index;
|
|
u16 pvlan, reg;
|
|
unsigned int i;
|
|
|
|
/* Make this port leave the all VLANs join since we will have proper
|
|
* VLAN entries from now on
|
|
*/
|
|
if (is58xx(dev)) {
|
|
b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®);
|
|
reg &= ~BIT(port);
|
|
if ((reg & BIT(cpu_port)) == BIT(cpu_port))
|
|
reg &= ~BIT(cpu_port);
|
|
b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
|
|
}
|
|
|
|
b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
|
|
|
|
b53_for_each_port(dev, i) {
|
|
if (dsa_to_port(ds, i)->bridge_dev != br)
|
|
continue;
|
|
|
|
/* Add this local port to the remote port VLAN control
|
|
* membership and update the remote port bitmask
|
|
*/
|
|
b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), ®);
|
|
reg |= BIT(port);
|
|
b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
|
|
dev->ports[i].vlan_ctl_mask = reg;
|
|
|
|
pvlan |= BIT(i);
|
|
}
|
|
|
|
/* Configure the local port VLAN control membership to include
|
|
* remote ports and update the local port bitmask
|
|
*/
|
|
b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
|
|
dev->ports[port].vlan_ctl_mask = pvlan;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(b53_br_join);
|
|
|
|
void b53_br_leave(struct dsa_switch *ds, int port, struct net_device *br)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
struct b53_vlan *vl = &dev->vlans[0];
|
|
s8 cpu_port = ds->ports[port].cpu_dp->index;
|
|
unsigned int i;
|
|
u16 pvlan, reg, pvid;
|
|
|
|
b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
|
|
|
|
b53_for_each_port(dev, i) {
|
|
/* Don't touch the remaining ports */
|
|
if (dsa_to_port(ds, i)->bridge_dev != br)
|
|
continue;
|
|
|
|
b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), ®);
|
|
reg &= ~BIT(port);
|
|
b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
|
|
dev->ports[port].vlan_ctl_mask = reg;
|
|
|
|
/* Prevent self removal to preserve isolation */
|
|
if (port != i)
|
|
pvlan &= ~BIT(i);
|
|
}
|
|
|
|
b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
|
|
dev->ports[port].vlan_ctl_mask = pvlan;
|
|
|
|
if (is5325(dev) || is5365(dev))
|
|
pvid = 1;
|
|
else
|
|
pvid = 0;
|
|
|
|
/* Make this port join all VLANs without VLAN entries */
|
|
if (is58xx(dev)) {
|
|
b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®);
|
|
reg |= BIT(port);
|
|
if (!(reg & BIT(cpu_port)))
|
|
reg |= BIT(cpu_port);
|
|
b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
|
|
} else {
|
|
b53_get_vlan_entry(dev, pvid, vl);
|
|
vl->members |= BIT(port) | BIT(cpu_port);
|
|
vl->untag |= BIT(port) | BIT(cpu_port);
|
|
b53_set_vlan_entry(dev, pvid, vl);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(b53_br_leave);
|
|
|
|
void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
u8 hw_state;
|
|
u8 reg;
|
|
|
|
switch (state) {
|
|
case BR_STATE_DISABLED:
|
|
hw_state = PORT_CTRL_DIS_STATE;
|
|
break;
|
|
case BR_STATE_LISTENING:
|
|
hw_state = PORT_CTRL_LISTEN_STATE;
|
|
break;
|
|
case BR_STATE_LEARNING:
|
|
hw_state = PORT_CTRL_LEARN_STATE;
|
|
break;
|
|
case BR_STATE_FORWARDING:
|
|
hw_state = PORT_CTRL_FWD_STATE;
|
|
break;
|
|
case BR_STATE_BLOCKING:
|
|
hw_state = PORT_CTRL_BLOCK_STATE;
|
|
break;
|
|
default:
|
|
dev_err(ds->dev, "invalid STP state: %d\n", state);
|
|
return;
|
|
}
|
|
|
|
b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), ®);
|
|
reg &= ~PORT_CTRL_STP_STATE_MASK;
|
|
reg |= hw_state;
|
|
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
|
|
}
|
|
EXPORT_SYMBOL(b53_br_set_stp_state);
|
|
|
|
void b53_br_fast_age(struct dsa_switch *ds, int port)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
|
|
if (b53_fast_age_port(dev, port))
|
|
dev_err(ds->dev, "fast ageing failed\n");
|
|
}
|
|
EXPORT_SYMBOL(b53_br_fast_age);
|
|
|
|
static bool b53_possible_cpu_port(struct dsa_switch *ds, int port)
|
|
{
|
|
/* Broadcom switches will accept enabling Broadcom tags on the
|
|
* following ports: 5, 7 and 8, any other port is not supported
|
|
*/
|
|
switch (port) {
|
|
case B53_CPU_PORT_25:
|
|
case 7:
|
|
case B53_CPU_PORT:
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool b53_can_enable_brcm_tags(struct dsa_switch *ds, int port)
|
|
{
|
|
bool ret = b53_possible_cpu_port(ds, port);
|
|
|
|
if (!ret)
|
|
dev_warn(ds->dev, "Port %d is not Broadcom tag capable\n",
|
|
port);
|
|
return ret;
|
|
}
|
|
|
|
enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
|
|
/* Older models (5325, 5365) support a different tag format that we do
|
|
* not support in net/dsa/tag_brcm.c yet. 539x and 531x5 require managed
|
|
* mode to be turned on which means we need to specifically manage ARL
|
|
* misses on multicast addresses (TBD).
|
|
*/
|
|
if (is5325(dev) || is5365(dev) || is539x(dev) || is531x5(dev) ||
|
|
!b53_can_enable_brcm_tags(ds, port))
|
|
return DSA_TAG_PROTO_NONE;
|
|
|
|
/* Broadcom BCM58xx chips have a flow accelerator on Port 8
|
|
* which requires us to use the prepended Broadcom tag type
|
|
*/
|
|
if (dev->chip_id == BCM58XX_DEVICE_ID && port == B53_CPU_PORT)
|
|
return DSA_TAG_PROTO_BRCM_PREPEND;
|
|
|
|
return DSA_TAG_PROTO_BRCM;
|
|
}
|
|
EXPORT_SYMBOL(b53_get_tag_protocol);
|
|
|
|
int b53_mirror_add(struct dsa_switch *ds, int port,
|
|
struct dsa_mall_mirror_tc_entry *mirror, bool ingress)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
u16 reg, loc;
|
|
|
|
if (ingress)
|
|
loc = B53_IG_MIR_CTL;
|
|
else
|
|
loc = B53_EG_MIR_CTL;
|
|
|
|
b53_read16(dev, B53_MGMT_PAGE, loc, ®);
|
|
reg &= ~MIRROR_MASK;
|
|
reg |= BIT(port);
|
|
b53_write16(dev, B53_MGMT_PAGE, loc, reg);
|
|
|
|
b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, ®);
|
|
reg &= ~CAP_PORT_MASK;
|
|
reg |= mirror->to_local_port;
|
|
reg |= MIRROR_EN;
|
|
b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(b53_mirror_add);
|
|
|
|
void b53_mirror_del(struct dsa_switch *ds, int port,
|
|
struct dsa_mall_mirror_tc_entry *mirror)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
bool loc_disable = false, other_loc_disable = false;
|
|
u16 reg, loc;
|
|
|
|
if (mirror->ingress)
|
|
loc = B53_IG_MIR_CTL;
|
|
else
|
|
loc = B53_EG_MIR_CTL;
|
|
|
|
/* Update the desired ingress/egress register */
|
|
b53_read16(dev, B53_MGMT_PAGE, loc, ®);
|
|
reg &= ~BIT(port);
|
|
if (!(reg & MIRROR_MASK))
|
|
loc_disable = true;
|
|
b53_write16(dev, B53_MGMT_PAGE, loc, reg);
|
|
|
|
/* Now look at the other one to know if we can disable mirroring
|
|
* entirely
|
|
*/
|
|
if (mirror->ingress)
|
|
b53_read16(dev, B53_MGMT_PAGE, B53_EG_MIR_CTL, ®);
|
|
else
|
|
b53_read16(dev, B53_MGMT_PAGE, B53_IG_MIR_CTL, ®);
|
|
if (!(reg & MIRROR_MASK))
|
|
other_loc_disable = true;
|
|
|
|
b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, ®);
|
|
/* Both no longer have ports, let's disable mirroring */
|
|
if (loc_disable && other_loc_disable) {
|
|
reg &= ~MIRROR_EN;
|
|
reg &= ~mirror->to_local_port;
|
|
}
|
|
b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
|
|
}
|
|
EXPORT_SYMBOL(b53_mirror_del);
|
|
|
|
void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
u16 reg;
|
|
|
|
b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, ®);
|
|
if (enable)
|
|
reg |= BIT(port);
|
|
else
|
|
reg &= ~BIT(port);
|
|
b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg);
|
|
}
|
|
EXPORT_SYMBOL(b53_eee_enable_set);
|
|
|
|
|
|
/* Returns 0 if EEE was not enabled, or 1 otherwise
|
|
*/
|
|
int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
|
|
{
|
|
int ret;
|
|
|
|
ret = phy_init_eee(phy, 0);
|
|
if (ret)
|
|
return 0;
|
|
|
|
b53_eee_enable_set(ds, port, true);
|
|
|
|
return 1;
|
|
}
|
|
EXPORT_SYMBOL(b53_eee_init);
|
|
|
|
int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
struct ethtool_eee *p = &dev->ports[port].eee;
|
|
u16 reg;
|
|
|
|
if (is5325(dev) || is5365(dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
b53_read16(dev, B53_EEE_PAGE, B53_EEE_LPI_INDICATE, ®);
|
|
e->eee_enabled = p->eee_enabled;
|
|
e->eee_active = !!(reg & BIT(port));
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(b53_get_mac_eee);
|
|
|
|
int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
|
|
{
|
|
struct b53_device *dev = ds->priv;
|
|
struct ethtool_eee *p = &dev->ports[port].eee;
|
|
|
|
if (is5325(dev) || is5365(dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
p->eee_enabled = e->eee_enabled;
|
|
b53_eee_enable_set(ds, port, e->eee_enabled);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(b53_set_mac_eee);
|
|
|
|
static const struct dsa_switch_ops b53_switch_ops = {
|
|
.get_tag_protocol = b53_get_tag_protocol,
|
|
.setup = b53_setup,
|
|
.get_strings = b53_get_strings,
|
|
.get_ethtool_stats = b53_get_ethtool_stats,
|
|
.get_sset_count = b53_get_sset_count,
|
|
.get_ethtool_phy_stats = b53_get_ethtool_phy_stats,
|
|
.phy_read = b53_phy_read16,
|
|
.phy_write = b53_phy_write16,
|
|
.adjust_link = b53_adjust_link,
|
|
.phylink_validate = b53_phylink_validate,
|
|
.phylink_mac_link_state = b53_phylink_mac_link_state,
|
|
.phylink_mac_config = b53_phylink_mac_config,
|
|
.phylink_mac_an_restart = b53_phylink_mac_an_restart,
|
|
.phylink_mac_link_down = b53_phylink_mac_link_down,
|
|
.phylink_mac_link_up = b53_phylink_mac_link_up,
|
|
.port_enable = b53_enable_port,
|
|
.port_disable = b53_disable_port,
|
|
.get_mac_eee = b53_get_mac_eee,
|
|
.set_mac_eee = b53_set_mac_eee,
|
|
.port_bridge_join = b53_br_join,
|
|
.port_bridge_leave = b53_br_leave,
|
|
.port_stp_state_set = b53_br_set_stp_state,
|
|
.port_fast_age = b53_br_fast_age,
|
|
.port_vlan_filtering = b53_vlan_filtering,
|
|
.port_vlan_prepare = b53_vlan_prepare,
|
|
.port_vlan_add = b53_vlan_add,
|
|
.port_vlan_del = b53_vlan_del,
|
|
.port_fdb_dump = b53_fdb_dump,
|
|
.port_fdb_add = b53_fdb_add,
|
|
.port_fdb_del = b53_fdb_del,
|
|
.port_mirror_add = b53_mirror_add,
|
|
.port_mirror_del = b53_mirror_del,
|
|
};
|
|
|
|
struct b53_chip_data {
|
|
u32 chip_id;
|
|
const char *dev_name;
|
|
u16 vlans;
|
|
u16 enabled_ports;
|
|
u8 cpu_port;
|
|
u8 vta_regs[3];
|
|
u8 arl_entries;
|
|
u8 duplex_reg;
|
|
u8 jumbo_pm_reg;
|
|
u8 jumbo_size_reg;
|
|
};
|
|
|
|
#define B53_VTA_REGS \
|
|
{ B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY }
|
|
#define B53_VTA_REGS_9798 \
|
|
{ B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 }
|
|
#define B53_VTA_REGS_63XX \
|
|
{ B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX }
|
|
|
|
static const struct b53_chip_data b53_switch_chips[] = {
|
|
{
|
|
.chip_id = BCM5325_DEVICE_ID,
|
|
.dev_name = "BCM5325",
|
|
.vlans = 16,
|
|
.enabled_ports = 0x1f,
|
|
.arl_entries = 2,
|
|
.cpu_port = B53_CPU_PORT_25,
|
|
.duplex_reg = B53_DUPLEX_STAT_FE,
|
|
},
|
|
{
|
|
.chip_id = BCM5365_DEVICE_ID,
|
|
.dev_name = "BCM5365",
|
|
.vlans = 256,
|
|
.enabled_ports = 0x1f,
|
|
.arl_entries = 2,
|
|
.cpu_port = B53_CPU_PORT_25,
|
|
.duplex_reg = B53_DUPLEX_STAT_FE,
|
|
},
|
|
{
|
|
.chip_id = BCM5389_DEVICE_ID,
|
|
.dev_name = "BCM5389",
|
|
.vlans = 4096,
|
|
.enabled_ports = 0x1f,
|
|
.arl_entries = 4,
|
|
.cpu_port = B53_CPU_PORT,
|
|
.vta_regs = B53_VTA_REGS,
|
|
.duplex_reg = B53_DUPLEX_STAT_GE,
|
|
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
|
|
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
|
|
},
|
|
{
|
|
.chip_id = BCM5395_DEVICE_ID,
|
|
.dev_name = "BCM5395",
|
|
.vlans = 4096,
|
|
.enabled_ports = 0x1f,
|
|
.arl_entries = 4,
|
|
.cpu_port = B53_CPU_PORT,
|
|
.vta_regs = B53_VTA_REGS,
|
|
.duplex_reg = B53_DUPLEX_STAT_GE,
|
|
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
|
|
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
|
|
},
|
|
{
|
|
.chip_id = BCM5397_DEVICE_ID,
|
|
.dev_name = "BCM5397",
|
|
.vlans = 4096,
|
|
.enabled_ports = 0x1f,
|
|
.arl_entries = 4,
|
|
.cpu_port = B53_CPU_PORT,
|
|
.vta_regs = B53_VTA_REGS_9798,
|
|
.duplex_reg = B53_DUPLEX_STAT_GE,
|
|
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
|
|
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
|
|
},
|
|
{
|
|
.chip_id = BCM5398_DEVICE_ID,
|
|
.dev_name = "BCM5398",
|
|
.vlans = 4096,
|
|
.enabled_ports = 0x7f,
|
|
.arl_entries = 4,
|
|
.cpu_port = B53_CPU_PORT,
|
|
.vta_regs = B53_VTA_REGS_9798,
|
|
.duplex_reg = B53_DUPLEX_STAT_GE,
|
|
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
|
|
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
|
|
},
|
|
{
|
|
.chip_id = BCM53115_DEVICE_ID,
|
|
.dev_name = "BCM53115",
|
|
.vlans = 4096,
|
|
.enabled_ports = 0x1f,
|
|
.arl_entries = 4,
|
|
.vta_regs = B53_VTA_REGS,
|
|
.cpu_port = B53_CPU_PORT,
|
|
.duplex_reg = B53_DUPLEX_STAT_GE,
|
|
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
|
|
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
|
|
},
|
|
{
|
|
.chip_id = BCM53125_DEVICE_ID,
|
|
.dev_name = "BCM53125",
|
|
.vlans = 4096,
|
|
.enabled_ports = 0xff,
|
|
.arl_entries = 4,
|
|
.cpu_port = B53_CPU_PORT,
|
|
.vta_regs = B53_VTA_REGS,
|
|
.duplex_reg = B53_DUPLEX_STAT_GE,
|
|
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
|
|
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
|
|
},
|
|
{
|
|
.chip_id = BCM53128_DEVICE_ID,
|
|
.dev_name = "BCM53128",
|
|
.vlans = 4096,
|
|
.enabled_ports = 0x1ff,
|
|
.arl_entries = 4,
|
|
.cpu_port = B53_CPU_PORT,
|
|
.vta_regs = B53_VTA_REGS,
|
|
.duplex_reg = B53_DUPLEX_STAT_GE,
|
|
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
|
|
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
|
|
},
|
|
{
|
|
.chip_id = BCM63XX_DEVICE_ID,
|
|
.dev_name = "BCM63xx",
|
|
.vlans = 4096,
|
|
.enabled_ports = 0, /* pdata must provide them */
|
|
.arl_entries = 4,
|
|
.cpu_port = B53_CPU_PORT,
|
|
.vta_regs = B53_VTA_REGS_63XX,
|
|
.duplex_reg = B53_DUPLEX_STAT_63XX,
|
|
.jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
|
|
.jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
|
|
},
|
|
{
|
|
.chip_id = BCM53010_DEVICE_ID,
|
|
.dev_name = "BCM53010",
|
|
.vlans = 4096,
|
|
.enabled_ports = 0x1f,
|
|
.arl_entries = 4,
|
|
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
|
|
.vta_regs = B53_VTA_REGS,
|
|
.duplex_reg = B53_DUPLEX_STAT_GE,
|
|
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
|
|
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
|
|
},
|
|
{
|
|
.chip_id = BCM53011_DEVICE_ID,
|
|
.dev_name = "BCM53011",
|
|
.vlans = 4096,
|
|
.enabled_ports = 0x1bf,
|
|
.arl_entries = 4,
|
|
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
|
|
.vta_regs = B53_VTA_REGS,
|
|
.duplex_reg = B53_DUPLEX_STAT_GE,
|
|
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
|
|
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
|
|
},
|
|
{
|
|
.chip_id = BCM53012_DEVICE_ID,
|
|
.dev_name = "BCM53012",
|
|
.vlans = 4096,
|
|
.enabled_ports = 0x1bf,
|
|
.arl_entries = 4,
|
|
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
|
|
.vta_regs = B53_VTA_REGS,
|
|
.duplex_reg = B53_DUPLEX_STAT_GE,
|
|
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
|
|
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
|
|
},
|
|
{
|
|
.chip_id = BCM53018_DEVICE_ID,
|
|
.dev_name = "BCM53018",
|
|
.vlans = 4096,
|
|
.enabled_ports = 0x1f,
|
|
.arl_entries = 4,
|
|
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
|
|
.vta_regs = B53_VTA_REGS,
|
|
.duplex_reg = B53_DUPLEX_STAT_GE,
|
|
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
|
|
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
|
|
},
|
|
{
|
|
.chip_id = BCM53019_DEVICE_ID,
|
|
.dev_name = "BCM53019",
|
|
.vlans = 4096,
|
|
.enabled_ports = 0x1f,
|
|
.arl_entries = 4,
|
|
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
|
|
.vta_regs = B53_VTA_REGS,
|
|
.duplex_reg = B53_DUPLEX_STAT_GE,
|
|
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
|
|
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
|
|
},
|
|
{
|
|
.chip_id = BCM58XX_DEVICE_ID,
|
|
.dev_name = "BCM585xx/586xx/88312",
|
|
.vlans = 4096,
|
|
.enabled_ports = 0x1ff,
|
|
.arl_entries = 4,
|
|
.cpu_port = B53_CPU_PORT,
|
|
.vta_regs = B53_VTA_REGS,
|
|
.duplex_reg = B53_DUPLEX_STAT_GE,
|
|
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
|
|
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
|
|
},
|
|
{
|
|
.chip_id = BCM583XX_DEVICE_ID,
|
|
.dev_name = "BCM583xx/11360",
|
|
.vlans = 4096,
|
|
.enabled_ports = 0x103,
|
|
.arl_entries = 4,
|
|
.cpu_port = B53_CPU_PORT,
|
|
.vta_regs = B53_VTA_REGS,
|
|
.duplex_reg = B53_DUPLEX_STAT_GE,
|
|
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
|
|
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
|
|
},
|
|
{
|
|
.chip_id = BCM7445_DEVICE_ID,
|
|
.dev_name = "BCM7445",
|
|
.vlans = 4096,
|
|
.enabled_ports = 0x1ff,
|
|
.arl_entries = 4,
|
|
.cpu_port = B53_CPU_PORT,
|
|
.vta_regs = B53_VTA_REGS,
|
|
.duplex_reg = B53_DUPLEX_STAT_GE,
|
|
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
|
|
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
|
|
},
|
|
{
|
|
.chip_id = BCM7278_DEVICE_ID,
|
|
.dev_name = "BCM7278",
|
|
.vlans = 4096,
|
|
.enabled_ports = 0x1ff,
|
|
.arl_entries= 4,
|
|
.cpu_port = B53_CPU_PORT,
|
|
.vta_regs = B53_VTA_REGS,
|
|
.duplex_reg = B53_DUPLEX_STAT_GE,
|
|
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
|
|
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
|
|
},
|
|
};
|
|
|
|
static int b53_switch_init(struct b53_device *dev)
|
|
{
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) {
|
|
const struct b53_chip_data *chip = &b53_switch_chips[i];
|
|
|
|
if (chip->chip_id == dev->chip_id) {
|
|
if (!dev->enabled_ports)
|
|
dev->enabled_ports = chip->enabled_ports;
|
|
dev->name = chip->dev_name;
|
|
dev->duplex_reg = chip->duplex_reg;
|
|
dev->vta_regs[0] = chip->vta_regs[0];
|
|
dev->vta_regs[1] = chip->vta_regs[1];
|
|
dev->vta_regs[2] = chip->vta_regs[2];
|
|
dev->jumbo_pm_reg = chip->jumbo_pm_reg;
|
|
dev->cpu_port = chip->cpu_port;
|
|
dev->num_vlans = chip->vlans;
|
|
dev->num_arl_entries = chip->arl_entries;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* check which BCM5325x version we have */
|
|
if (is5325(dev)) {
|
|
u8 vc4;
|
|
|
|
b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
|
|
|
|
/* check reserved bits */
|
|
switch (vc4 & 3) {
|
|
case 1:
|
|
/* BCM5325E */
|
|
break;
|
|
case 3:
|
|
/* BCM5325F - do not use port 4 */
|
|
dev->enabled_ports &= ~BIT(4);
|
|
break;
|
|
default:
|
|
/* On the BCM47XX SoCs this is the supported internal switch.*/
|
|
#ifndef CONFIG_BCM47XX
|
|
/* BCM5325M */
|
|
return -EINVAL;
|
|
#else
|
|
break;
|
|
#endif
|
|
}
|
|
} else if (dev->chip_id == BCM53115_DEVICE_ID) {
|
|
u64 strap_value;
|
|
|
|
b53_read48(dev, B53_STAT_PAGE, B53_STRAP_VALUE, &strap_value);
|
|
/* use second IMP port if GMII is enabled */
|
|
if (strap_value & SV_GMII_CTRL_115)
|
|
dev->cpu_port = 5;
|
|
}
|
|
|
|
/* cpu port is always last */
|
|
dev->num_ports = dev->cpu_port + 1;
|
|
dev->enabled_ports |= BIT(dev->cpu_port);
|
|
|
|
/* Include non standard CPU port built-in PHYs to be probed */
|
|
if (is539x(dev) || is531x5(dev)) {
|
|
for (i = 0; i < dev->num_ports; i++) {
|
|
if (!(dev->ds->phys_mii_mask & BIT(i)) &&
|
|
!b53_possible_cpu_port(dev->ds, i))
|
|
dev->ds->phys_mii_mask |= BIT(i);
|
|
}
|
|
}
|
|
|
|
dev->ports = devm_kcalloc(dev->dev,
|
|
dev->num_ports, sizeof(struct b53_port),
|
|
GFP_KERNEL);
|
|
if (!dev->ports)
|
|
return -ENOMEM;
|
|
|
|
dev->vlans = devm_kcalloc(dev->dev,
|
|
dev->num_vlans, sizeof(struct b53_vlan),
|
|
GFP_KERNEL);
|
|
if (!dev->vlans)
|
|
return -ENOMEM;
|
|
|
|
dev->reset_gpio = b53_switch_get_reset_gpio(dev);
|
|
if (dev->reset_gpio >= 0) {
|
|
ret = devm_gpio_request_one(dev->dev, dev->reset_gpio,
|
|
GPIOF_OUT_INIT_HIGH, "robo_reset");
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct b53_device *b53_switch_alloc(struct device *base,
|
|
const struct b53_io_ops *ops,
|
|
void *priv)
|
|
{
|
|
struct dsa_switch *ds;
|
|
struct b53_device *dev;
|
|
|
|
ds = dsa_switch_alloc(base, DSA_MAX_PORTS);
|
|
if (!ds)
|
|
return NULL;
|
|
|
|
dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
|
|
if (!dev)
|
|
return NULL;
|
|
|
|
ds->priv = dev;
|
|
dev->dev = base;
|
|
|
|
dev->ds = ds;
|
|
dev->priv = priv;
|
|
dev->ops = ops;
|
|
ds->ops = &b53_switch_ops;
|
|
mutex_init(&dev->reg_mutex);
|
|
mutex_init(&dev->stats_mutex);
|
|
|
|
return dev;
|
|
}
|
|
EXPORT_SYMBOL(b53_switch_alloc);
|
|
|
|
int b53_switch_detect(struct b53_device *dev)
|
|
{
|
|
u32 id32;
|
|
u16 tmp;
|
|
u8 id8;
|
|
int ret;
|
|
|
|
ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (id8) {
|
|
case 0:
|
|
/* BCM5325 and BCM5365 do not have this register so reads
|
|
* return 0. But the read operation did succeed, so assume this
|
|
* is one of them.
|
|
*
|
|
* Next check if we can write to the 5325's VTA register; for
|
|
* 5365 it is read only.
|
|
*/
|
|
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf);
|
|
b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp);
|
|
|
|
if (tmp == 0xf)
|
|
dev->chip_id = BCM5325_DEVICE_ID;
|
|
else
|
|
dev->chip_id = BCM5365_DEVICE_ID;
|
|
break;
|
|
case BCM5389_DEVICE_ID:
|
|
case BCM5395_DEVICE_ID:
|
|
case BCM5397_DEVICE_ID:
|
|
case BCM5398_DEVICE_ID:
|
|
dev->chip_id = id8;
|
|
break;
|
|
default:
|
|
ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (id32) {
|
|
case BCM53115_DEVICE_ID:
|
|
case BCM53125_DEVICE_ID:
|
|
case BCM53128_DEVICE_ID:
|
|
case BCM53010_DEVICE_ID:
|
|
case BCM53011_DEVICE_ID:
|
|
case BCM53012_DEVICE_ID:
|
|
case BCM53018_DEVICE_ID:
|
|
case BCM53019_DEVICE_ID:
|
|
dev->chip_id = id32;
|
|
break;
|
|
default:
|
|
pr_err("unsupported switch detected (BCM53%02x/BCM%x)\n",
|
|
id8, id32);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
if (dev->chip_id == BCM5325_DEVICE_ID)
|
|
return b53_read8(dev, B53_STAT_PAGE, B53_REV_ID_25,
|
|
&dev->core_rev);
|
|
else
|
|
return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID,
|
|
&dev->core_rev);
|
|
}
|
|
EXPORT_SYMBOL(b53_switch_detect);
|
|
|
|
int b53_switch_register(struct b53_device *dev)
|
|
{
|
|
int ret;
|
|
|
|
if (dev->pdata) {
|
|
dev->chip_id = dev->pdata->chip_id;
|
|
dev->enabled_ports = dev->pdata->enabled_ports;
|
|
}
|
|
|
|
if (!dev->chip_id && b53_switch_detect(dev))
|
|
return -EINVAL;
|
|
|
|
ret = b53_switch_init(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pr_info("found switch: %s, rev %i\n", dev->name, dev->core_rev);
|
|
|
|
return dsa_register_switch(dev->ds);
|
|
}
|
|
EXPORT_SYMBOL(b53_switch_register);
|
|
|
|
MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
|
|
MODULE_DESCRIPTION("B53 switch library");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|