355 lines
12 KiB
Plaintext
355 lines
12 KiB
Plaintext
#
|
|
# USB Host Controller Drivers
|
|
#
|
|
comment "USB Host Controller Drivers"
|
|
depends on USB
|
|
|
|
config USB_C67X00_HCD
|
|
tristate "Cypress C67x00 HCD support"
|
|
depends on USB
|
|
help
|
|
The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
|
|
host/peripheral/OTG USB controllers.
|
|
|
|
Enable this option to support this chip in host controller mode.
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called c67x00.
|
|
|
|
config USB_EHCI_HCD
|
|
tristate "EHCI HCD (USB 2.0) support"
|
|
depends on USB && USB_ARCH_HAS_EHCI
|
|
---help---
|
|
The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
|
|
"high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
|
|
If your USB host controller supports USB 2.0, you will likely want to
|
|
configure this Host Controller Driver. At the time of this writing,
|
|
the primary implementation of EHCI is a chip from NEC, widely available
|
|
in add-on PCI cards, but implementations are in the works from other
|
|
vendors including Intel and Philips. Motherboard support is appearing.
|
|
|
|
EHCI controllers are packaged with "companion" host controllers (OHCI
|
|
or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
|
|
will connect to EHCI if the device is high speed, otherwise they
|
|
connect to a companion controller. If you configure EHCI, you should
|
|
probably configure the OHCI (for NEC and some other vendors) USB Host
|
|
Controller Driver or UHCI (for Via motherboards) Host Controller
|
|
Driver too.
|
|
|
|
You may want to read <file:Documentation/usb/ehci.txt>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ehci-hcd.
|
|
|
|
config USB_EHCI_ROOT_HUB_TT
|
|
bool "Root Hub Transaction Translators"
|
|
depends on USB_EHCI_HCD
|
|
---help---
|
|
Some EHCI chips have vendor-specific extensions to integrate
|
|
transaction translators, so that no OHCI or UHCI companion
|
|
controller is needed. It's safe to say "y" even if your
|
|
controller doesn't support this feature.
|
|
|
|
This supports the EHCI implementation that's originally
|
|
from ARC, and has since changed hands a few times.
|
|
|
|
config USB_EHCI_TT_NEWSCHED
|
|
bool "Improved Transaction Translator scheduling (EXPERIMENTAL)"
|
|
depends on USB_EHCI_HCD && EXPERIMENTAL
|
|
---help---
|
|
This changes the periodic scheduling code to fill more of the low
|
|
and full speed bandwidth available from the Transaction Translator
|
|
(TT) in USB 2.0 hubs. Without this, only one transfer will be
|
|
issued in each microframe, significantly reducing the number of
|
|
periodic low/fullspeed transfers possible.
|
|
|
|
If you have multiple periodic low/fullspeed devices connected to a
|
|
highspeed USB hub which is connected to a highspeed USB Host
|
|
Controller, and some of those devices will not work correctly
|
|
(possibly due to "ENOSPC" or "-28" errors), say Y.
|
|
|
|
If unsure, say N.
|
|
|
|
config USB_EHCI_BIG_ENDIAN_MMIO
|
|
bool
|
|
depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX)
|
|
default y
|
|
|
|
config USB_EHCI_BIG_ENDIAN_DESC
|
|
bool
|
|
depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
|
|
default y
|
|
|
|
config USB_EHCI_FSL
|
|
bool "Support for Freescale on-chip EHCI USB controller"
|
|
depends on USB_EHCI_HCD && FSL_SOC
|
|
select USB_EHCI_ROOT_HUB_TT
|
|
---help---
|
|
Variation of ARC USB block used in some Freescale chips.
|
|
|
|
config USB_EHCI_HCD_PPC_OF
|
|
bool "EHCI support for PPC USB controller on OF platform bus"
|
|
depends on USB_EHCI_HCD && PPC_OF
|
|
default y
|
|
---help---
|
|
Enables support for the USB controller present on the PowerPC
|
|
OpenFirmware platform bus.
|
|
|
|
config USB_OXU210HP_HCD
|
|
tristate "OXU210HP HCD support"
|
|
depends on USB
|
|
---help---
|
|
The OXU210HP is an USB host/OTG/device controller. Enable this
|
|
option if your board has this chip. If unsure, say N.
|
|
|
|
This driver does not support isochronous transfers and doesn't
|
|
implement OTG nor USB device controllers.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called oxu210hp-hcd.
|
|
|
|
config USB_ISP116X_HCD
|
|
tristate "ISP116X HCD support"
|
|
depends on USB
|
|
---help---
|
|
The ISP1160 and ISP1161 chips are USB host controllers. Enable this
|
|
option if your board has this chip. If unsure, say N.
|
|
|
|
This driver does not support isochronous transfers.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called isp116x-hcd.
|
|
|
|
config USB_ISP1760_HCD
|
|
tristate "ISP 1760 HCD support"
|
|
depends on USB && EXPERIMENTAL && (PCI || PPC_OF)
|
|
---help---
|
|
The ISP1760 chip is a USB 2.0 host controller.
|
|
|
|
This driver does not support isochronous transfers or OTG.
|
|
This USB controller is usually attached to a non-DMA-Master
|
|
capable bus. NXP's eval kit brings this chip on PCI card
|
|
where the chip itself is behind a PLB to simulate such
|
|
a bus.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called isp1760.
|
|
|
|
config USB_OHCI_HCD
|
|
tristate "OHCI HCD support"
|
|
depends on USB && USB_ARCH_HAS_OHCI
|
|
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
|
|
select USB_OTG_UTILS if ARCH_OMAP
|
|
---help---
|
|
The Open Host Controller Interface (OHCI) is a standard for accessing
|
|
USB 1.1 host controller hardware. It does more in hardware than Intel's
|
|
UHCI specification. If your USB host controller follows the OHCI spec,
|
|
say Y. On most non-x86 systems, and on x86 hardware that's not using a
|
|
USB controller from Intel or VIA, this is appropriate. If your host
|
|
controller doesn't use PCI, this is probably appropriate. For a PCI
|
|
based system where you're not sure, the "lspci -v" entry will list the
|
|
right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ohci-hcd.
|
|
|
|
config USB_OHCI_HCD_PPC_SOC
|
|
bool "OHCI support for on-chip PPC USB controller"
|
|
depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
|
|
default y
|
|
select USB_OHCI_BIG_ENDIAN_DESC
|
|
select USB_OHCI_BIG_ENDIAN_MMIO
|
|
---help---
|
|
Enables support for the USB controller on the MPC52xx or
|
|
STB03xxx processor chip. If unsure, say Y.
|
|
|
|
config USB_OHCI_HCD_PPC_OF
|
|
bool "OHCI support for PPC USB controller on OF platform bus"
|
|
depends on USB_OHCI_HCD && PPC_OF
|
|
default y
|
|
---help---
|
|
Enables support for the USB controller PowerPC present on the
|
|
OpenFirmware platform bus.
|
|
|
|
config USB_OHCI_HCD_PPC_OF_BE
|
|
bool "Support big endian HC"
|
|
depends on USB_OHCI_HCD_PPC_OF
|
|
default y
|
|
select USB_OHCI_BIG_ENDIAN_DESC
|
|
select USB_OHCI_BIG_ENDIAN_MMIO
|
|
|
|
config USB_OHCI_HCD_PPC_OF_LE
|
|
bool "Support little endian HC"
|
|
depends on USB_OHCI_HCD_PPC_OF
|
|
default n
|
|
select USB_OHCI_LITTLE_ENDIAN
|
|
|
|
config USB_OHCI_HCD_PCI
|
|
bool "OHCI support for PCI-bus USB controllers"
|
|
depends on USB_OHCI_HCD && PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF)
|
|
default y
|
|
select USB_OHCI_LITTLE_ENDIAN
|
|
---help---
|
|
Enables support for PCI-bus plug-in USB controller cards.
|
|
If unsure, say Y.
|
|
|
|
config USB_OHCI_HCD_SSB
|
|
bool "OHCI support for Broadcom SSB OHCI core"
|
|
depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL
|
|
default n
|
|
---help---
|
|
Support for the Sonics Silicon Backplane (SSB) attached
|
|
Broadcom USB OHCI core.
|
|
|
|
This device is present in some embedded devices with
|
|
Broadcom based SSB bus.
|
|
|
|
If unsure, say N.
|
|
|
|
config USB_OHCI_BIG_ENDIAN_DESC
|
|
bool
|
|
depends on USB_OHCI_HCD
|
|
default n
|
|
|
|
config USB_OHCI_BIG_ENDIAN_MMIO
|
|
bool
|
|
depends on USB_OHCI_HCD
|
|
default n
|
|
|
|
config USB_OHCI_LITTLE_ENDIAN
|
|
bool
|
|
depends on USB_OHCI_HCD
|
|
default n if STB03xxx || PPC_MPC52xx
|
|
default y
|
|
|
|
config USB_UHCI_HCD
|
|
tristate "UHCI HCD (most Intel and VIA) support"
|
|
depends on USB && PCI
|
|
---help---
|
|
The Universal Host Controller Interface is a standard by Intel for
|
|
accessing the USB hardware in the PC (which is also called the USB
|
|
host controller). If your USB host controller conforms to this
|
|
standard, you may want to say Y, but see below. All recent boards
|
|
with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
|
|
i810, i820) conform to this standard. Also all VIA PCI chipsets
|
|
(like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
|
|
133). If unsure, say Y.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called uhci-hcd.
|
|
|
|
config USB_FHCI_HCD
|
|
tristate "Freescale QE USB Host Controller support"
|
|
depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE
|
|
select FSL_GTM
|
|
select QE_USB
|
|
help
|
|
This driver enables support for Freescale QE USB Host Controller
|
|
(as found on MPC8360 and MPC8323 processors), the driver supports
|
|
Full and Low Speed USB.
|
|
|
|
config FHCI_DEBUG
|
|
bool "Freescale QE USB Host Controller debug support"
|
|
depends on USB_FHCI_HCD && DEBUG_FS
|
|
help
|
|
Say "y" to see some FHCI debug information and statistics
|
|
throught debugfs.
|
|
|
|
config USB_U132_HCD
|
|
tristate "Elan U132 Adapter Host Controller"
|
|
depends on USB && USB_FTDI_ELAN
|
|
default M
|
|
help
|
|
The U132 adapter is a USB to CardBus adapter specifically designed
|
|
for PC cards that contain an OHCI host controller. Typical PC cards
|
|
are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132
|
|
adapter will *NOT* work with PC cards that do not contain an OHCI
|
|
controller.
|
|
|
|
For those PC cards that contain multiple OHCI controllers only the
|
|
first one is used.
|
|
|
|
The driver consists of two modules, the "ftdi-elan" module is a
|
|
USB client driver that interfaces to the FTDI chip within ELAN's
|
|
USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
|
|
controller driver that talks to the OHCI controller within the
|
|
CardBus cards that are inserted in the U132 adapter.
|
|
|
|
This driver has been tested with a CardBus OHCI USB adapter, and
|
|
worked with a USB PEN Drive inserted into the first USB port of
|
|
the PCCARD. A rather pointless thing to do, but useful for testing.
|
|
|
|
It is safe to say M here.
|
|
|
|
See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php>
|
|
|
|
config USB_SL811_HCD
|
|
tristate "SL811HS HCD support"
|
|
depends on USB
|
|
help
|
|
The SL811HS is a single-port USB controller that supports either
|
|
host side or peripheral side roles. Enable this option if your
|
|
board has this chip, and you want to use it as a host controller.
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called sl811-hcd.
|
|
|
|
config USB_SL811_CS
|
|
tristate "CF/PCMCIA support for SL811HS HCD"
|
|
depends on USB_SL811_HCD && PCMCIA
|
|
help
|
|
Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
|
|
REX-CFU1U CF card (often used with PDAs). If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called "sl811_cs".
|
|
|
|
config USB_R8A66597_HCD
|
|
tristate "R8A66597 HCD support"
|
|
depends on USB
|
|
help
|
|
The R8A66597 is a USB 2.0 host and peripheral controller.
|
|
|
|
Enable this option if your board has this chip, and you want
|
|
to use it as a host controller. If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called r8a66597-hcd.
|
|
|
|
config SUPERH_ON_CHIP_R8A66597
|
|
boolean "Enable SuperH on-chip R8A66597 USB"
|
|
depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723)
|
|
help
|
|
This driver enables support for the on-chip R8A66597 in the
|
|
SH7366 and SH7723 processors.
|
|
|
|
config USB_WHCI_HCD
|
|
tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL
|
|
depends on PCI && USB
|
|
select USB_WUSB
|
|
select UWB_WHCI
|
|
help
|
|
A driver for PCI-based Wireless USB Host Controllers that are
|
|
compliant with the WHCI specification.
|
|
|
|
To compile this driver a module, choose M here: the module
|
|
will be called "whci-hcd".
|
|
|
|
config USB_HWA_HCD
|
|
tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL
|
|
depends on USB
|
|
select USB_WUSB
|
|
select UWB_HWA
|
|
help
|
|
This driver enables you to connect Wireless USB devices to
|
|
your system using a Host Wire Adaptor USB dongle. This is an
|
|
UWB Radio Controller and WUSB Host Controller connected to
|
|
your machine via USB (specified in WUSB1.0).
|
|
|
|
To compile this driver a module, choose M here: the module
|
|
will be called "hwa-hc".
|