Bin Liu bc1e215454 usb: musb: fix possible spinlock deadlock ... The DSPS glue calls del_timer_sync() in its musb_platform_disable() implementation, which requires the caller to not hold a lock. But musb_remove() calls musb_platform_disable() will musb->lock held. This could causes spinlock deadlock. So change musb_remove() to call musb_platform_disable() without holds musb->lock. This doesn't impact the musb_platform_disable implementation in other glue drivers. root@am335x-evm:~# modprobe -r musb-dsps [ 126.134879] musb-hdrc musb-hdrc.1: remove, state 1 [ 126.140465] usb usb2: USB disconnect, device number 1 [ 126.146178] usb 2-1: USB disconnect, device number 2 [ 126.416985] musb-hdrc musb-hdrc.1: USB bus 2 deregistered [ 126.423943] [ 126.425525] ====================================================== [ 126.431997] [ INFO: possible circular locking dependency detected ] [ 126.438564] 4.11.0-rc1-00003-g1557f13bca04-dirty #77 Not tainted [ 126.444852] ------------------------------------------------------- [ 126.451414] modprobe/778 is trying to acquire lock: [ 126.456523] (((&glue->timer))){+.-...}, at: [<c01b8788>] del_timer_sync+0x0/0xd0 [ 126.464403] [ 126.464403] but task is already holding lock: [ 126.470511] (&(&musb->lock)->rlock){-.-...}, at: [<bf30b7f8>] musb_remove+0x50/0x1 30 [musb_hdrc] [ 126.479965] [ 126.479965] which lock already depends on the new lock. [ 126.479965] [ 126.488531] [ 126.488531] the existing dependency chain (in reverse order) is: [ 126.496368] [ 126.496368] -> #1 (&(&musb->lock)->rlock){-.-...}: [ 126.502968] otg_timer+0x80/0xec [musb_dsps] [ 126.507990] call_timer_fn+0xb4/0x390 [ 126.512372] expire_timers+0xf0/0x1fc [ 126.516754] run_timer_softirq+0x80/0x178 [ 126.521511] __do_softirq+0xc4/0x554 [ 126.525802] irq_exit+0xe8/0x158 [ 126.529735] __handle_domain_irq+0x58/0xb8 [ 126.534583] __irq_usr+0x54/0x80 [ 126.538507] [ 126.538507] -> #0 (((&glue->timer))){+.-...}: [ 126.544636] del_timer_sync+0x40/0xd0 [ 126.549066] musb_remove+0x6c/0x130 [musb_hdrc] [ 126.554370] platform_drv_remove+0x24/0x3c [ 126.559206] device_release_driver_internal+0x14c/0x1e0 [ 126.565225] bus_remove_device+0xd8/0x108 [ 126.569970] device_del+0x1e4/0x308 [ 126.574170] platform_device_del+0x24/0x8c [ 126.579006] platform_device_unregister+0xc/0x20 [ 126.584394] dsps_remove+0x14/0x30 [musb_dsps] [ 126.589595] platform_drv_remove+0x24/0x3c [ 126.594432] device_release_driver_internal+0x14c/0x1e0 [ 126.600450] driver_detach+0x38/0x6c [ 126.604740] bus_remove_driver+0x4c/0xa0 [ 126.609407] SyS_delete_module+0x11c/0x1e4 [ 126.614252] __sys_trace_return+0x0/0x10 Fixes: ea2f35c01d ("usb: musb: Fix sleeping function called from invalid context for hdrc glue") Cc: <stable@vger.kernel.org> #4.9+ Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2017-03-14 17:13:14 +08:00
..
Kconfig	Merge 4.8-rc7 into usb-next	2016-09-19 09:12:41 +02:00
Makefile	usb: musb: add tracepoints support for debugging	2016-07-17 08:23:57 +09:00
am35x.c	usb: musb: am35x: remove redundant code	2017-02-03 10:05:10 +01:00
blackfin.c	usb: musb: blackfin: fix unused warnings on suspend/resume	2017-02-03 10:05:11 +01:00
blackfin.h	…
cppi_dma.c	usb: musb: cppi_dma: Clean up cppi structure	2017-02-09 13:35:05 +01:00
cppi_dma.h	usb: musb: cppi_dma: Clean up cppi structure	2017-02-09 13:35:05 +01:00
da8xx.c	usb: musb: da8xx: Fix host mode suspend	2017-02-03 10:05:10 +01:00
davinci.c	usb: musb: davinci: remove redundant code	2017-02-03 10:05:10 +01:00
davinci.h	usb: musb: davinci: Fix build breakage	2012-06-04 18:29:42 +03:00
jz4740.c	usb: musb: constify musb_hdrc_config structures	2017-01-25 10:52:43 +01:00
musb_am335x.c	usb: musb: Fix panic upon musb_am335x module removal	2014-06-27 10:53:06 -05:00
musb_core.c	usb: musb: fix possible spinlock deadlock	2017-03-14 17:13:14 +08:00
musb_core.h	Merge 4.10-rc7 into usb-next	2017-02-06 09:32:06 +01:00
musb_cppi41.c	usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer	2017-03-14 17:13:14 +08:00
musb_debug.h	usb: musb: add tracepoints support for debugging	2016-07-17 08:23:57 +09:00
musb_debugfs.c	usb: musb: debugfs: allow forcing host mode together with speed in testmode	2017-02-03 10:05:11 +01:00
musb_dma.h	usb: musb: dma: Add a DMA completion platform callback	2017-02-09 13:35:05 +01:00
musb_dsps.c	usb: musb: dsps: fix iounmap in error and exit paths	2017-03-14 17:13:14 +08:00
musb_gadget.c	Merge 4.9-rc7 into usb-next	2016-11-28 08:34:10 +01:00
musb_gadget.h	usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes	2013-05-28 19:22:23 +03:00
musb_gadget_ep0.c	usb: musb: switch dev_dbg to tracepoints	2016-07-17 08:23:57 +09:00
musb_host.c	usb: musb: core: add clear_ep_rxintr() to musb_platform_ops	2017-01-05 19:18:05 +01:00
musb_host.h	usb: musb: fix prototype for musb_port_reset	2013-12-20 15:05:43 -06:00
musb_io.h	usb: musb: Make busctl_offset an io-op rather then a define	2015-05-26 10:46:54 -05:00
musb_regs.h	usb: musb: Make busctl_offset an io-op rather then a define	2015-05-26 10:46:54 -05:00
musb_trace.c	usb: musb: add tracepoints support for debugging	2016-07-17 08:23:57 +09:00
musb_trace.h	usb: musb: cppi41: add dma channel tracepoints	2016-07-17 08:23:57 +09:00
musb_virthub.c	USB: musb: remove obsolete resume-signalling comments	2016-11-21 17:35:36 +01:00
musbhsdma.c	usb: musb: switch dev_dbg to tracepoints	2016-07-17 08:23:57 +09:00
musbhsdma.h	usb: musb: Fix trying to free already-free IRQ 4	2017-01-05 19:18:05 +01:00
omap2430.c	usb: musb: omap2430: constify dev_pm_ops structures	2017-02-03 10:05:11 +01:00
omap2430.h	usb: start using the control module driver	2013-01-25 12:27:24 +02:00
sunxi.c	usb: musb: sunxi: add support for the variant in H3/V3s SoC	2017-02-03 10:05:11 +01:00
tusb6010.c	usb: musb: Fix PM for hub disconnect	2016-11-17 16:25:39 +01:00
tusb6010.h	usb: musb: Fix up DMA related macros	2015-05-07 13:35:46 -05:00
tusb6010_omap.c	usb: musb: tusb6010: Clean up tusb_omap_dma structure	2017-02-09 13:35:05 +01:00
ux500.c	usb: musb: constify musb_hdrc_config structures	2017-01-25 10:52:43 +01:00
ux500_dma.c	usb: musb/ux500: remove duplicate check for dma_is_compatible	2016-03-04 15:14:30 +02:00