336 lines
8.4 KiB
C
336 lines
8.4 KiB
C
/*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org)
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/bootmem.h>
|
|
#include <linux/init.h>
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
|
|
/*
|
|
* Indicate whether we respect the PCI setup left by the firmware.
|
|
*
|
|
* Make this long-lived so that we know when shutting down
|
|
* whether we probed only or not.
|
|
*/
|
|
int pci_probe_only;
|
|
|
|
#define PCI_ASSIGN_ALL_BUSSES 1
|
|
|
|
unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES;
|
|
|
|
/*
|
|
* The PCI controller list.
|
|
*/
|
|
|
|
struct pci_controller *hose_head, **hose_tail = &hose_head;
|
|
struct pci_controller *pci_isa_hose;
|
|
|
|
unsigned long PCIBIOS_MIN_IO = 0x0000;
|
|
unsigned long PCIBIOS_MIN_MEM = 0;
|
|
|
|
/*
|
|
* We need to avoid collisions with `mirrored' VGA ports
|
|
* and other strange ISA hardware, so we always want the
|
|
* addresses to be allocated in the 0x000-0x0ff region
|
|
* modulo 0x400.
|
|
*
|
|
* Why? Because some silly external IO cards only decode
|
|
* the low 10 bits of the IO address. The 0x00-0xff region
|
|
* is reserved for motherboard devices that decode all 16
|
|
* bits, so it's ok to allocate at, say, 0x2800-0x28ff,
|
|
* but we want to try to avoid allocating at 0x2900-0x2bff
|
|
* which might have be mirrored at 0x0100-0x03ff..
|
|
*/
|
|
void
|
|
pcibios_align_resource(void *data, struct resource *res,
|
|
resource_size_t size, resource_size_t align)
|
|
{
|
|
struct pci_dev *dev = data;
|
|
struct pci_controller *hose = dev->sysdata;
|
|
resource_size_t start = res->start;
|
|
|
|
if (res->flags & IORESOURCE_IO) {
|
|
/* Make sure we start at our min on all hoses */
|
|
if (start < PCIBIOS_MIN_IO + hose->io_resource->start)
|
|
start = PCIBIOS_MIN_IO + hose->io_resource->start;
|
|
|
|
/*
|
|
* Put everything into 0x00-0xff region modulo 0x400
|
|
*/
|
|
if (start & 0x300)
|
|
start = (start + 0x3ff) & ~0x3ff;
|
|
} else if (res->flags & IORESOURCE_MEM) {
|
|
/* Make sure we start at our min on all hoses */
|
|
if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start)
|
|
start = PCIBIOS_MIN_MEM + hose->mem_resource->start;
|
|
}
|
|
|
|
res->start = start;
|
|
}
|
|
|
|
void __devinit register_pci_controller(struct pci_controller *hose)
|
|
{
|
|
if (request_resource(&iomem_resource, hose->mem_resource) < 0)
|
|
goto out;
|
|
if (request_resource(&ioport_resource, hose->io_resource) < 0) {
|
|
release_resource(hose->mem_resource);
|
|
goto out;
|
|
}
|
|
|
|
*hose_tail = hose;
|
|
hose_tail = &hose->next;
|
|
|
|
/*
|
|
* Do not panic here but later - this might hapen before console init.
|
|
*/
|
|
if (!hose->io_map_base) {
|
|
printk(KERN_WARNING
|
|
"registering PCI controller with io_map_base unset\n");
|
|
}
|
|
return;
|
|
|
|
out:
|
|
printk(KERN_WARNING
|
|
"Skipping PCI bus scan due to resource conflict\n");
|
|
}
|
|
|
|
/* Most MIPS systems have straight-forward swizzling needs. */
|
|
|
|
static inline u8 bridge_swizzle(u8 pin, u8 slot)
|
|
{
|
|
return (((pin - 1) + slot) % 4) + 1;
|
|
}
|
|
|
|
static u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp)
|
|
{
|
|
u8 pin = *pinp;
|
|
|
|
while (dev->bus->parent) {
|
|
pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
|
|
/* Move up the chain of bridges. */
|
|
dev = dev->bus->self;
|
|
}
|
|
*pinp = pin;
|
|
|
|
/* The slot is the slot of the last bridge. */
|
|
return PCI_SLOT(dev->devfn);
|
|
}
|
|
|
|
static int __init pcibios_init(void)
|
|
{
|
|
struct pci_controller *hose;
|
|
struct pci_bus *bus;
|
|
int next_busno;
|
|
int need_domain_info = 0;
|
|
|
|
/* Scan all of the recorded PCI controllers. */
|
|
for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
|
|
|
|
if (!hose->iommu)
|
|
PCI_DMA_BUS_IS_PHYS = 1;
|
|
|
|
if (hose->get_busno && pci_probe_only)
|
|
next_busno = (*hose->get_busno)();
|
|
|
|
bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
|
|
hose->bus = bus;
|
|
need_domain_info = need_domain_info || hose->index;
|
|
hose->need_domain_info = need_domain_info;
|
|
if (bus) {
|
|
next_busno = bus->subordinate + 1;
|
|
/* Don't allow 8-bit bus number overflow inside the hose -
|
|
reserve some space for bridges. */
|
|
if (next_busno > 224) {
|
|
next_busno = 0;
|
|
need_domain_info = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!pci_probe_only)
|
|
pci_assign_unassigned_resources();
|
|
pci_fixup_irqs(common_swizzle, pcibios_map_irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
subsys_initcall(pcibios_init);
|
|
|
|
static int pcibios_enable_resources(struct pci_dev *dev, int mask)
|
|
{
|
|
u16 cmd, old_cmd;
|
|
int idx;
|
|
struct resource *r;
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
old_cmd = cmd;
|
|
for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
|
|
/* Only set up the requested stuff */
|
|
if (!(mask & (1<<idx)))
|
|
continue;
|
|
|
|
r = &dev->resource[idx];
|
|
if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
|
|
continue;
|
|
if ((idx == PCI_ROM_RESOURCE) &&
|
|
(!(r->flags & IORESOURCE_ROM_ENABLE)))
|
|
continue;
|
|
if (!r->start && r->end) {
|
|
printk(KERN_ERR "PCI: Device %s not available "
|
|
"because of resource collisions\n",
|
|
pci_name(dev));
|
|
return -EINVAL;
|
|
}
|
|
if (r->flags & IORESOURCE_IO)
|
|
cmd |= PCI_COMMAND_IO;
|
|
if (r->flags & IORESOURCE_MEM)
|
|
cmd |= PCI_COMMAND_MEMORY;
|
|
}
|
|
if (cmd != old_cmd) {
|
|
printk("PCI: Enabling device %s (%04x -> %04x)\n",
|
|
pci_name(dev), old_cmd, cmd);
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* If we set up a device for bus mastering, we need to check the latency
|
|
* timer as certain crappy BIOSes forget to set it properly.
|
|
*/
|
|
unsigned int pcibios_max_latency = 255;
|
|
|
|
void pcibios_set_master(struct pci_dev *dev)
|
|
{
|
|
u8 lat;
|
|
pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
|
|
if (lat < 16)
|
|
lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
|
|
else if (lat > pcibios_max_latency)
|
|
lat = pcibios_max_latency;
|
|
else
|
|
return;
|
|
printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n",
|
|
pci_name(dev), lat);
|
|
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
|
|
}
|
|
|
|
unsigned int pcibios_assign_all_busses(void)
|
|
{
|
|
return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
|
|
}
|
|
|
|
int pcibios_enable_device(struct pci_dev *dev, int mask)
|
|
{
|
|
int err;
|
|
|
|
if ((err = pcibios_enable_resources(dev, mask)) < 0)
|
|
return err;
|
|
|
|
return pcibios_plat_dev_init(dev);
|
|
}
|
|
|
|
static void pcibios_fixup_device_resources(struct pci_dev *dev,
|
|
struct pci_bus *bus)
|
|
{
|
|
/* Update device resources. */
|
|
struct pci_controller *hose = (struct pci_controller *)bus->sysdata;
|
|
unsigned long offset = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
|
|
if (!dev->resource[i].start)
|
|
continue;
|
|
if (dev->resource[i].flags & IORESOURCE_PCI_FIXED)
|
|
continue;
|
|
if (dev->resource[i].flags & IORESOURCE_IO)
|
|
offset = hose->io_offset;
|
|
else if (dev->resource[i].flags & IORESOURCE_MEM)
|
|
offset = hose->mem_offset;
|
|
|
|
dev->resource[i].start += offset;
|
|
dev->resource[i].end += offset;
|
|
}
|
|
}
|
|
|
|
void __devinit pcibios_fixup_bus(struct pci_bus *bus)
|
|
{
|
|
/* Propagate hose info into the subordinate devices. */
|
|
|
|
struct pci_controller *hose = bus->sysdata;
|
|
struct list_head *ln;
|
|
struct pci_dev *dev = bus->self;
|
|
|
|
if (!dev) {
|
|
bus->resource[0] = hose->io_resource;
|
|
bus->resource[1] = hose->mem_resource;
|
|
} else if (pci_probe_only &&
|
|
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
|
|
pci_read_bridge_bases(bus);
|
|
pcibios_fixup_device_resources(dev, bus);
|
|
}
|
|
|
|
for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
|
|
dev = pci_dev_b(ln);
|
|
|
|
if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
|
|
pcibios_fixup_device_resources(dev, bus);
|
|
}
|
|
}
|
|
|
|
void __init
|
|
pcibios_update_irq(struct pci_dev *dev, int irq)
|
|
{
|
|
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
|
|
}
|
|
|
|
void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
|
|
struct resource *res)
|
|
{
|
|
struct pci_controller *hose = (struct pci_controller *)dev->sysdata;
|
|
unsigned long offset = 0;
|
|
|
|
if (res->flags & IORESOURCE_IO)
|
|
offset = hose->io_offset;
|
|
else if (res->flags & IORESOURCE_MEM)
|
|
offset = hose->mem_offset;
|
|
|
|
region->start = res->start - offset;
|
|
region->end = res->end - offset;
|
|
}
|
|
|
|
void __devinit
|
|
pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
|
|
struct pci_bus_region *region)
|
|
{
|
|
struct pci_controller *hose = (struct pci_controller *)dev->sysdata;
|
|
unsigned long offset = 0;
|
|
|
|
if (res->flags & IORESOURCE_IO)
|
|
offset = hose->io_offset;
|
|
else if (res->flags & IORESOURCE_MEM)
|
|
offset = hose->mem_offset;
|
|
|
|
res->start = region->start + offset;
|
|
res->end = region->end + offset;
|
|
}
|
|
|
|
#ifdef CONFIG_HOTPLUG
|
|
EXPORT_SYMBOL(pcibios_resource_to_bus);
|
|
EXPORT_SYMBOL(pcibios_bus_to_resource);
|
|
EXPORT_SYMBOL(PCIBIOS_MIN_IO);
|
|
EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
|
|
#endif
|
|
|
|
char *pcibios_setup(char *str)
|
|
{
|
|
return str;
|
|
}
|