173 lines
4.3 KiB
YAML
173 lines
4.3 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Texas Instruments GPMC Memory Controller device-tree bindings
|
|
|
|
maintainers:
|
|
- Tony Lindgren <tony@atomide.com>
|
|
- Roger Quadros <rogerq@kernel.org>
|
|
|
|
description:
|
|
The GPMC is a unified memory controller dedicated for interfacing
|
|
with external memory devices like
|
|
- Asynchronous SRAM-like memories and ASICs
|
|
- Asynchronous, synchronous, and page mode burst NOR flash
|
|
- NAND flash
|
|
- Pseudo-SRAM devices
|
|
|
|
properties:
|
|
compatible:
|
|
items:
|
|
- enum:
|
|
- ti,am3352-gpmc
|
|
- ti,omap2420-gpmc
|
|
- ti,omap2430-gpmc
|
|
- ti,omap3430-gpmc
|
|
- ti,omap4430-gpmc
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
description: |
|
|
Functional clock. Used for bus timing calculations and
|
|
GPMC configuration.
|
|
|
|
clock-names:
|
|
items:
|
|
- const: fck
|
|
|
|
dmas:
|
|
items:
|
|
- description: DMA channel for GPMC NAND prefetch
|
|
|
|
dma-names:
|
|
items:
|
|
- const: rxtx
|
|
|
|
"#address-cells": true
|
|
|
|
"#size-cells": true
|
|
|
|
gpmc,num-cs:
|
|
description: maximum number of supported chip-select lines.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
gpmc,num-waitpins:
|
|
description: maximum number of supported wait pins.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
ranges:
|
|
minItems: 1
|
|
description: |
|
|
Must be set up to reflect the memory layout with four
|
|
integer values for each chip-select line in use,
|
|
<cs-number> 0 <physical address of mapping> <size>
|
|
items:
|
|
- description: NAND bank 0
|
|
- description: NOR/SRAM bank 0
|
|
- description: NOR/SRAM bank 1
|
|
|
|
'#interrupt-cells':
|
|
const: 2
|
|
|
|
interrupt-controller:
|
|
description: |
|
|
The GPMC driver implements and interrupt controller for
|
|
the NAND events "fifoevent" and "termcount" plus the
|
|
rising/falling edges on the GPMC_WAIT pins.
|
|
The interrupt number mapping is as follows
|
|
0 - NAND_fifoevent
|
|
1 - NAND_termcount
|
|
2 - GPMC_WAIT0 pin edge
|
|
3 - GPMC_WAIT1 pin edge, and so on.
|
|
|
|
'#gpio-cells':
|
|
const: 2
|
|
|
|
gpio-controller:
|
|
description: |
|
|
The GPMC driver implements a GPIO controller for the
|
|
GPMC WAIT pins that can be used as general purpose inputs.
|
|
0 maps to GPMC_WAIT0 pin.
|
|
|
|
ti,hwmods:
|
|
description:
|
|
Name of the HWMOD associated with GPMC. This is for legacy
|
|
omap2/3 platforms only.
|
|
$ref: /schemas/types.yaml#/definitions/string
|
|
deprecated: true
|
|
|
|
ti,no-idle-on-init:
|
|
description:
|
|
Prevent idling the module at init. This is for legacy omap2/3
|
|
platforms only.
|
|
type: boolean
|
|
deprecated: true
|
|
|
|
patternProperties:
|
|
"@[0-7],[a-f0-9]+$":
|
|
type: object
|
|
description: |
|
|
The child device node represents the device connected to the GPMC
|
|
bus. The device can be a NAND chip, SRAM device, NOR device
|
|
or an ASIC.
|
|
|
|
allOf:
|
|
- $ref: "ti,gpmc-child.yaml"
|
|
|
|
unevaluatedProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- gpmc,num-cs
|
|
- gpmc,num-waitpins
|
|
- "#address-cells"
|
|
- "#size-cells"
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
gpmc: memory-controller@50000000 {
|
|
compatible = "ti,am3352-gpmc";
|
|
reg = <0x50000000 0x2000>;
|
|
interrupts = <100>;
|
|
clocks = <&l3s_clkctrl>;
|
|
clock-names = "fck";
|
|
dmas = <&edma 52 0>;
|
|
dma-names = "rxtx";
|
|
gpmc,num-cs = <8>;
|
|
gpmc,num-waitpins = <2>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
nand@0,0 {
|
|
compatible = "ti,omap2-nand";
|
|
reg = <0 0 4>;
|
|
interrupt-parent = <&gpmc>;
|
|
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
|
|
<1 IRQ_TYPE_NONE>; /* termcount */
|
|
ti,nand-xfer-type = "prefetch-dma";
|
|
ti,nand-ecc-opt = "bch16";
|
|
ti,elm-id = <&elm>;
|
|
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
|
|
};
|
|
};
|