OpenCloudOS-Kernel/drivers/pinctrl/sunxi
Linus Torvalds e0b8b78651 This is the bulk pin control changes for the v3.17 merge
development cycle:
 
 - Get rid of the .disable() callback from the driver callback
   vtable. This callback was abused and counterintuitive since
   a pin or group of pins can be said to always be in some
   setting, and never really disabled. We now only enable a
   certain muxing, and move between some certain muxings, we
   never "disable" a mux setting.
 
 - Some janitorial moving the MSM, Samsung and Nomadik and
   drivers to their own subdirectories for a clearer view in
   the subsystem. This will continue.
 
 - Kill off the use of the return value from gpiochip_remove(),
   this will be done in parallel in the GPIO subsystem and
   hopefully not trigger too many unchecked return value
   warnings before we get rid of this altogether.
 
 - A huge set of changes and improvements to the Allwinner
   sunxi drivers especially for their latest A23 and A31 SoCs,
   and some ground work for the new sun8i platform family.
 
 - A large set of Rockchip driver improvements adding support
   for the RK3288 SoC.
 
 - Advances in migration of older Freescale platforms to pin
   control, especially i.MX1.
 
 - Samsung and Exynos improvements.
 
 - Support for the Qualcomm MSM8960 SoC.
 
 - Use the gpiolib irqchip helpers for the ST SPEAr and
   Intel Baytrail drivers.
 
 - A bunch of nice janitorial work done with cppcheck.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT41HwAAoJEEEQszewGV1zVN0QAMJOJcsjYyHG+b/y0upJ5n1c
 tyPelyxKrpGUUTvTsO5LiqvoIfa2E/DrwXupRAC4zAXvb+x3TUGkiluK4Yxl5e56
 AqjePnSydqqHiRZOK4Q06W7VwGUoxLltDmDPTcra+DAaijIeKUPMQE1MvcPxisMe
 IR7PZN58JYCG3ZV5yjwfBBxcRAm8KiiwHvQdBywPIGGvvmpy1X+U96U869nQgUH2
 70lpJVPx75bhyAFk99bE9nAnroZeRR7mvijjf26ssyAFNqeJ0K7Xlom+NtpHdiw0
 lsDKdBiAWVbZON/7Pc24gpHzhBoIYdA/6LxPA8Xz4QVFRmfxmNkZhuXZnZ7Dbuj2
 xv9HtnjExqjZcfeNyUlO0iQDEQIUN/oPkaBS2G8DNZ/bmQqC8EzkIFh6F72KO1s2
 7FU214LcuBYuAa3HvNLmgtjSkgou8tTMj58rnZ1XDr2mI9tzlrwI3i6ZrJZWKDur
 NIoRAcUZkFiMpXxqLbk4UXzDvuJgrzaFiQ2PkxTXAlC2DjXz+gXPzPIOSD5LTaHE
 k3WvZfuGK2iPoKeDHaLx2qEl9PoD5hz1JH3o+bgOKkRZG2gEJWd02JwhuPyRPLfc
 TeBgmdYS2t2MBS21VsqoObw8336oCHJu7tDAxTkAalLsZy9MV2WqThhZoYggZ/Rq
 yMqCr8vfd2pRVtwYe7Wc
 =t1pR
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl updates from Linus Walleij:
 "This is the bulk pin control changes for the v3.17 merge development
  cycle:

   - get rid of the .disable() callback from the driver callback vtable.

     This callback was abused and counterintuitive since a pin or group
     of pins can be said to always be in some setting, and never really
     disabled.  We now only enable a certain muxing, and move between
     some certain muxings, we never "disable" a mux setting

   - some janitorial moving the MSM, Samsung and Nomadik and drivers to
     their own subdirectories for a clearer view in the subsystem.  This
     will continue

   - kill off the use of the return value from gpiochip_remove(), this
     will be done in parallel in the GPIO subsystem and hopefully not
     trigger too many unchecked return value warnings before we get rid
     of this altogether

   - a huge set of changes and improvements to the Allwinner sunxi
     drivers especially for their latest A23 and A31 SoCs, and some
     ground work for the new sun8i platform family

   - a large set of Rockchip driver improvements adding support for the
     RK3288 SoC

   - advances in migration of older Freescale platforms to pin control,
     especially i.MX1

   - Samsung and Exynos improvements

   - support for the Qualcomm MSM8960 SoC

   - use the gpiolib irqchip helpers for the ST SPEAr and Intel Baytrail
     drivers

   - a bunch of nice janitorial work done with cppcheck"

* tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (61 commits)
  pinctrl: baytrail: Convert to use gpiolib irqchip
  pinctrl: sunxi: number gpio ranges starting from 0
  pinctrl: sunxi: use gpiolib API to mark a GPIO used as an IRQ
  pinctrl: rockchip: add drive-strength control for rk3288
  pinctrl: rockchip: add separate type for rk3288
  pinctrl: rockchip: set is_generic in pinconf_ops
  pinctrl: msm: drop negativity check on unsigned value
  pinctrl: remove all usage of gpio_remove ret val in driver/pinctl
  pinctrl: qcom: Make muxing of gpio function explicit
  pinctrl: nomadik: move all Nomadik drivers to subdir
  pinctrl: samsung: Group all drivers in a sub-dir
  sh-pfc: sh73a0: Introduce the use of devm_regulator_register
  sh-pfc: Add renesas,pfc-r8a7791 to binding documentation
  pinctrl: msm: move all qualcomm drivers to subdir
  pinctrl: msm: Add msm8960 definitions
  pinctrl: samsung: Allow pin value to be initialized using pinfunc
  pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes
  pinctrl: exynos: Consolidate irq_chips of GPIO and WKUP EINTs
  pinctrl: samsung: Handle GPIO request and free using pinctrl helpers
  pinctrl: samsung: Decouple direction setting from pinctrl
  ...
2014-08-07 17:20:53 -07:00
..
Kconfig pinctrl: sunxi: Add A23 R_PIO controller support 2014-07-11 14:08:30 +02:00
Makefile pinctrl: sunxi: Add A23 R_PIO controller support 2014-07-11 14:08:30 +02:00
pinctrl-sun4i-a10.c pinctrl: sunxi: Declare the number of interrupt banks in the descriptor 2014-06-19 09:35:11 +02:00
pinctrl-sun5i-a10s.c pinctrl: sunxi: Declare the number of interrupt banks in the descriptor 2014-06-19 09:35:11 +02:00
pinctrl-sun5i-a13.c pinctrl: sunxi: Remove gpio_out function from sun5i-a13 PG0/1/2 pins 2014-07-11 14:08:29 +02:00
pinctrl-sun6i-a31-r.c pinctrl: sunxi: Declare the number of interrupt banks in the descriptor 2014-06-19 09:35:11 +02:00
pinctrl-sun6i-a31.c pinctrl: sunxi: Declare the interrupt function for the A31 2014-06-19 09:35:12 +02:00
pinctrl-sun7i-a20.c pinctrl: sunxi: Declare the number of interrupt banks in the descriptor 2014-06-19 09:35:11 +02:00
pinctrl-sun8i-a23-r.c pinctrl: sunxi: Add A23 R_PIO controller support 2014-07-11 14:08:30 +02:00
pinctrl-sun8i-a23.c pinctrl: sunxi: Add A23 PIO controller support 2014-07-11 14:08:30 +02:00
pinctrl-sunxi.c This is the bulk pin control changes for the v3.17 merge 2014-08-07 17:20:53 -07:00
pinctrl-sunxi.h pinctrl: sunxi: Implement multiple interrupt banks support 2014-06-19 09:35:12 +02:00