435 lines
13 KiB
C
435 lines
13 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* linux/mdio.h: definitions for MDIO (clause 45) transceivers
|
|
* Copyright 2006-2009 Solarflare Communications Inc.
|
|
*/
|
|
#ifndef __LINUX_MDIO_H__
|
|
#define __LINUX_MDIO_H__
|
|
|
|
#include <uapi/linux/mdio.h>
|
|
#include <linux/mod_devicetable.h>
|
|
|
|
/* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
|
|
* IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips.
|
|
*/
|
|
#define MII_ADDR_C45 (1<<30)
|
|
#define MII_DEVADDR_C45_SHIFT 16
|
|
#define MII_REGADDR_C45_MASK GENMASK(15, 0)
|
|
|
|
struct gpio_desc;
|
|
struct mii_bus;
|
|
struct reset_control;
|
|
|
|
/* Multiple levels of nesting are possible. However typically this is
|
|
* limited to nested DSA like layer, a MUX layer, and the normal
|
|
* user. Instead of trying to handle the general case, just define
|
|
* these cases.
|
|
*/
|
|
enum mdio_mutex_lock_class {
|
|
MDIO_MUTEX_NORMAL,
|
|
MDIO_MUTEX_MUX,
|
|
MDIO_MUTEX_NESTED,
|
|
};
|
|
|
|
struct mdio_device {
|
|
struct device dev;
|
|
|
|
struct mii_bus *bus;
|
|
char modalias[MDIO_NAME_SIZE];
|
|
|
|
int (*bus_match)(struct device *dev, struct device_driver *drv);
|
|
void (*device_free)(struct mdio_device *mdiodev);
|
|
void (*device_remove)(struct mdio_device *mdiodev);
|
|
|
|
/* Bus address of the MDIO device (0-31) */
|
|
int addr;
|
|
int flags;
|
|
struct gpio_desc *reset_gpio;
|
|
struct reset_control *reset_ctrl;
|
|
unsigned int reset_assert_delay;
|
|
unsigned int reset_deassert_delay;
|
|
};
|
|
|
|
static inline struct mdio_device *to_mdio_device(const struct device *dev)
|
|
{
|
|
return container_of(dev, struct mdio_device, dev);
|
|
}
|
|
|
|
/* struct mdio_driver_common: Common to all MDIO drivers */
|
|
struct mdio_driver_common {
|
|
struct device_driver driver;
|
|
int flags;
|
|
};
|
|
#define MDIO_DEVICE_FLAG_PHY 1
|
|
|
|
static inline struct mdio_driver_common *
|
|
to_mdio_common_driver(const struct device_driver *driver)
|
|
{
|
|
return container_of(driver, struct mdio_driver_common, driver);
|
|
}
|
|
|
|
/* struct mdio_driver: Generic MDIO driver */
|
|
struct mdio_driver {
|
|
struct mdio_driver_common mdiodrv;
|
|
|
|
/*
|
|
* Called during discovery. Used to set
|
|
* up device-specific structures, if any
|
|
*/
|
|
int (*probe)(struct mdio_device *mdiodev);
|
|
|
|
/* Clears up any memory if needed */
|
|
void (*remove)(struct mdio_device *mdiodev);
|
|
|
|
/* Quiesces the device on system shutdown, turns off interrupts etc */
|
|
void (*shutdown)(struct mdio_device *mdiodev);
|
|
};
|
|
|
|
static inline struct mdio_driver *
|
|
to_mdio_driver(const struct device_driver *driver)
|
|
{
|
|
return container_of(to_mdio_common_driver(driver), struct mdio_driver,
|
|
mdiodrv);
|
|
}
|
|
|
|
/* device driver data */
|
|
static inline void mdiodev_set_drvdata(struct mdio_device *mdio, void *data)
|
|
{
|
|
dev_set_drvdata(&mdio->dev, data);
|
|
}
|
|
|
|
static inline void *mdiodev_get_drvdata(struct mdio_device *mdio)
|
|
{
|
|
return dev_get_drvdata(&mdio->dev);
|
|
}
|
|
|
|
void mdio_device_free(struct mdio_device *mdiodev);
|
|
struct mdio_device *mdio_device_create(struct mii_bus *bus, int addr);
|
|
int mdio_device_register(struct mdio_device *mdiodev);
|
|
void mdio_device_remove(struct mdio_device *mdiodev);
|
|
void mdio_device_reset(struct mdio_device *mdiodev, int value);
|
|
int mdio_driver_register(struct mdio_driver *drv);
|
|
void mdio_driver_unregister(struct mdio_driver *drv);
|
|
int mdio_device_bus_match(struct device *dev, struct device_driver *drv);
|
|
|
|
static inline bool mdio_phy_id_is_c45(int phy_id)
|
|
{
|
|
return (phy_id & MDIO_PHY_ID_C45) && !(phy_id & ~MDIO_PHY_ID_C45_MASK);
|
|
}
|
|
|
|
static inline __u16 mdio_phy_id_prtad(int phy_id)
|
|
{
|
|
return (phy_id & MDIO_PHY_ID_PRTAD) >> 5;
|
|
}
|
|
|
|
static inline __u16 mdio_phy_id_devad(int phy_id)
|
|
{
|
|
return phy_id & MDIO_PHY_ID_DEVAD;
|
|
}
|
|
|
|
/**
|
|
* struct mdio_if_info - Ethernet controller MDIO interface
|
|
* @prtad: PRTAD of the PHY (%MDIO_PRTAD_NONE if not present/unknown)
|
|
* @mmds: Mask of MMDs expected to be present in the PHY. This must be
|
|
* non-zero unless @prtad = %MDIO_PRTAD_NONE.
|
|
* @mode_support: MDIO modes supported. If %MDIO_SUPPORTS_C22 is set then
|
|
* MII register access will be passed through with @devad =
|
|
* %MDIO_DEVAD_NONE. If %MDIO_EMULATE_C22 is set then access to
|
|
* commonly used clause 22 registers will be translated into
|
|
* clause 45 registers.
|
|
* @dev: Net device structure
|
|
* @mdio_read: Register read function; returns value or negative error code
|
|
* @mdio_write: Register write function; returns 0 or negative error code
|
|
*/
|
|
struct mdio_if_info {
|
|
int prtad;
|
|
u32 mmds;
|
|
unsigned mode_support;
|
|
|
|
struct net_device *dev;
|
|
int (*mdio_read)(struct net_device *dev, int prtad, int devad,
|
|
u16 addr);
|
|
int (*mdio_write)(struct net_device *dev, int prtad, int devad,
|
|
u16 addr, u16 val);
|
|
};
|
|
|
|
#define MDIO_PRTAD_NONE (-1)
|
|
#define MDIO_DEVAD_NONE (-1)
|
|
#define MDIO_SUPPORTS_C22 1
|
|
#define MDIO_SUPPORTS_C45 2
|
|
#define MDIO_EMULATE_C22 4
|
|
|
|
struct ethtool_cmd;
|
|
struct ethtool_pauseparam;
|
|
extern int mdio45_probe(struct mdio_if_info *mdio, int prtad);
|
|
extern int mdio_set_flag(const struct mdio_if_info *mdio,
|
|
int prtad, int devad, u16 addr, int mask,
|
|
bool sense);
|
|
extern int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmds);
|
|
extern int mdio45_nway_restart(const struct mdio_if_info *mdio);
|
|
extern void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
|
|
struct ethtool_cmd *ecmd,
|
|
u32 npage_adv, u32 npage_lpa);
|
|
extern void
|
|
mdio45_ethtool_ksettings_get_npage(const struct mdio_if_info *mdio,
|
|
struct ethtool_link_ksettings *cmd,
|
|
u32 npage_adv, u32 npage_lpa);
|
|
|
|
/**
|
|
* mdio45_ethtool_gset - get settings for ETHTOOL_GSET
|
|
* @mdio: MDIO interface
|
|
* @ecmd: Ethtool request structure
|
|
*
|
|
* Since the CSRs for auto-negotiation using next pages are not fully
|
|
* standardised, this function does not attempt to decode them. Use
|
|
* mdio45_ethtool_gset_npage() to specify advertisement bits from next
|
|
* pages.
|
|
*/
|
|
static inline void mdio45_ethtool_gset(const struct mdio_if_info *mdio,
|
|
struct ethtool_cmd *ecmd)
|
|
{
|
|
mdio45_ethtool_gset_npage(mdio, ecmd, 0, 0);
|
|
}
|
|
|
|
/**
|
|
* mdio45_ethtool_ksettings_get - get settings for ETHTOOL_GLINKSETTINGS
|
|
* @mdio: MDIO interface
|
|
* @cmd: Ethtool request structure
|
|
*
|
|
* Since the CSRs for auto-negotiation using next pages are not fully
|
|
* standardised, this function does not attempt to decode them. Use
|
|
* mdio45_ethtool_ksettings_get_npage() to specify advertisement bits
|
|
* from next pages.
|
|
*/
|
|
static inline void
|
|
mdio45_ethtool_ksettings_get(const struct mdio_if_info *mdio,
|
|
struct ethtool_link_ksettings *cmd)
|
|
{
|
|
mdio45_ethtool_ksettings_get_npage(mdio, cmd, 0, 0);
|
|
}
|
|
|
|
extern int mdio_mii_ioctl(const struct mdio_if_info *mdio,
|
|
struct mii_ioctl_data *mii_data, int cmd);
|
|
|
|
/**
|
|
* mmd_eee_cap_to_ethtool_sup_t
|
|
* @eee_cap: value of the MMD EEE Capability register
|
|
*
|
|
* A small helper function that translates MMD EEE Capability (3.20) bits
|
|
* to ethtool supported settings.
|
|
*/
|
|
static inline u32 mmd_eee_cap_to_ethtool_sup_t(u16 eee_cap)
|
|
{
|
|
u32 supported = 0;
|
|
|
|
if (eee_cap & MDIO_EEE_100TX)
|
|
supported |= SUPPORTED_100baseT_Full;
|
|
if (eee_cap & MDIO_EEE_1000T)
|
|
supported |= SUPPORTED_1000baseT_Full;
|
|
if (eee_cap & MDIO_EEE_10GT)
|
|
supported |= SUPPORTED_10000baseT_Full;
|
|
if (eee_cap & MDIO_EEE_1000KX)
|
|
supported |= SUPPORTED_1000baseKX_Full;
|
|
if (eee_cap & MDIO_EEE_10GKX4)
|
|
supported |= SUPPORTED_10000baseKX4_Full;
|
|
if (eee_cap & MDIO_EEE_10GKR)
|
|
supported |= SUPPORTED_10000baseKR_Full;
|
|
|
|
return supported;
|
|
}
|
|
|
|
/**
|
|
* mmd_eee_adv_to_ethtool_adv_t
|
|
* @eee_adv: value of the MMD EEE Advertisement/Link Partner Ability registers
|
|
*
|
|
* A small helper function that translates the MMD EEE Advertisment (7.60)
|
|
* and MMD EEE Link Partner Ability (7.61) bits to ethtool advertisement
|
|
* settings.
|
|
*/
|
|
static inline u32 mmd_eee_adv_to_ethtool_adv_t(u16 eee_adv)
|
|
{
|
|
u32 adv = 0;
|
|
|
|
if (eee_adv & MDIO_EEE_100TX)
|
|
adv |= ADVERTISED_100baseT_Full;
|
|
if (eee_adv & MDIO_EEE_1000T)
|
|
adv |= ADVERTISED_1000baseT_Full;
|
|
if (eee_adv & MDIO_EEE_10GT)
|
|
adv |= ADVERTISED_10000baseT_Full;
|
|
if (eee_adv & MDIO_EEE_1000KX)
|
|
adv |= ADVERTISED_1000baseKX_Full;
|
|
if (eee_adv & MDIO_EEE_10GKX4)
|
|
adv |= ADVERTISED_10000baseKX4_Full;
|
|
if (eee_adv & MDIO_EEE_10GKR)
|
|
adv |= ADVERTISED_10000baseKR_Full;
|
|
|
|
return adv;
|
|
}
|
|
|
|
/**
|
|
* ethtool_adv_to_mmd_eee_adv_t
|
|
* @adv: the ethtool advertisement settings
|
|
*
|
|
* A small helper function that translates ethtool advertisement settings
|
|
* to EEE advertisements for the MMD EEE Advertisement (7.60) and
|
|
* MMD EEE Link Partner Ability (7.61) registers.
|
|
*/
|
|
static inline u16 ethtool_adv_to_mmd_eee_adv_t(u32 adv)
|
|
{
|
|
u16 reg = 0;
|
|
|
|
if (adv & ADVERTISED_100baseT_Full)
|
|
reg |= MDIO_EEE_100TX;
|
|
if (adv & ADVERTISED_1000baseT_Full)
|
|
reg |= MDIO_EEE_1000T;
|
|
if (adv & ADVERTISED_10000baseT_Full)
|
|
reg |= MDIO_EEE_10GT;
|
|
if (adv & ADVERTISED_1000baseKX_Full)
|
|
reg |= MDIO_EEE_1000KX;
|
|
if (adv & ADVERTISED_10000baseKX4_Full)
|
|
reg |= MDIO_EEE_10GKX4;
|
|
if (adv & ADVERTISED_10000baseKR_Full)
|
|
reg |= MDIO_EEE_10GKR;
|
|
|
|
return reg;
|
|
}
|
|
|
|
/**
|
|
* linkmode_adv_to_mii_10gbt_adv_t
|
|
* @advertising: the linkmode advertisement settings
|
|
*
|
|
* A small helper function that translates linkmode advertisement
|
|
* settings to phy autonegotiation advertisements for the C45
|
|
* 10GBASE-T AN CONTROL (7.32) register.
|
|
*/
|
|
static inline u32 linkmode_adv_to_mii_10gbt_adv_t(unsigned long *advertising)
|
|
{
|
|
u32 result = 0;
|
|
|
|
if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
|
|
advertising))
|
|
result |= MDIO_AN_10GBT_CTRL_ADV2_5G;
|
|
if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
|
|
advertising))
|
|
result |= MDIO_AN_10GBT_CTRL_ADV5G;
|
|
if (linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
|
|
advertising))
|
|
result |= MDIO_AN_10GBT_CTRL_ADV10G;
|
|
|
|
return result;
|
|
}
|
|
|
|
/**
|
|
* mii_10gbt_stat_mod_linkmode_lpa_t
|
|
* @advertising: target the linkmode advertisement settings
|
|
* @lpa: value of the C45 10GBASE-T AN STATUS register
|
|
*
|
|
* A small helper function that translates C45 10GBASE-T AN STATUS register bits
|
|
* to linkmode advertisement settings. Other bits in advertising aren't changed.
|
|
*/
|
|
static inline void mii_10gbt_stat_mod_linkmode_lpa_t(unsigned long *advertising,
|
|
u32 lpa)
|
|
{
|
|
linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
|
|
advertising, lpa & MDIO_AN_10GBT_STAT_LP2_5G);
|
|
linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
|
|
advertising, lpa & MDIO_AN_10GBT_STAT_LP5G);
|
|
linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
|
|
advertising, lpa & MDIO_AN_10GBT_STAT_LP10G);
|
|
}
|
|
|
|
int __mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
|
|
int __mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
|
|
int __mdiobus_modify_changed(struct mii_bus *bus, int addr, u32 regnum,
|
|
u16 mask, u16 set);
|
|
|
|
int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
|
|
int mdiobus_read_nested(struct mii_bus *bus, int addr, u32 regnum);
|
|
int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
|
|
int mdiobus_write_nested(struct mii_bus *bus, int addr, u32 regnum, u16 val);
|
|
int mdiobus_modify(struct mii_bus *bus, int addr, u32 regnum, u16 mask,
|
|
u16 set);
|
|
int mdiobus_modify_changed(struct mii_bus *bus, int addr, u32 regnum,
|
|
u16 mask, u16 set);
|
|
|
|
static inline int mdiodev_read(struct mdio_device *mdiodev, u32 regnum)
|
|
{
|
|
return mdiobus_read(mdiodev->bus, mdiodev->addr, regnum);
|
|
}
|
|
|
|
static inline int mdiodev_write(struct mdio_device *mdiodev, u32 regnum,
|
|
u16 val)
|
|
{
|
|
return mdiobus_write(mdiodev->bus, mdiodev->addr, regnum, val);
|
|
}
|
|
|
|
static inline int mdiodev_modify(struct mdio_device *mdiodev, u32 regnum,
|
|
u16 mask, u16 set)
|
|
{
|
|
return mdiobus_modify(mdiodev->bus, mdiodev->addr, regnum, mask, set);
|
|
}
|
|
|
|
static inline int mdiodev_modify_changed(struct mdio_device *mdiodev,
|
|
u32 regnum, u16 mask, u16 set)
|
|
{
|
|
return mdiobus_modify_changed(mdiodev->bus, mdiodev->addr, regnum,
|
|
mask, set);
|
|
}
|
|
|
|
static inline u32 mdiobus_c45_addr(int devad, u16 regnum)
|
|
{
|
|
return MII_ADDR_C45 | devad << MII_DEVADDR_C45_SHIFT | regnum;
|
|
}
|
|
|
|
static inline int __mdiobus_c45_read(struct mii_bus *bus, int prtad, int devad,
|
|
u16 regnum)
|
|
{
|
|
return __mdiobus_read(bus, prtad, mdiobus_c45_addr(devad, regnum));
|
|
}
|
|
|
|
static inline int __mdiobus_c45_write(struct mii_bus *bus, int prtad, int devad,
|
|
u16 regnum, u16 val)
|
|
{
|
|
return __mdiobus_write(bus, prtad, mdiobus_c45_addr(devad, regnum),
|
|
val);
|
|
}
|
|
|
|
static inline int mdiobus_c45_read(struct mii_bus *bus, int prtad, int devad,
|
|
u16 regnum)
|
|
{
|
|
return mdiobus_read(bus, prtad, mdiobus_c45_addr(devad, regnum));
|
|
}
|
|
|
|
static inline int mdiobus_c45_write(struct mii_bus *bus, int prtad, int devad,
|
|
u16 regnum, u16 val)
|
|
{
|
|
return mdiobus_write(bus, prtad, mdiobus_c45_addr(devad, regnum), val);
|
|
}
|
|
|
|
int mdiobus_register_device(struct mdio_device *mdiodev);
|
|
int mdiobus_unregister_device(struct mdio_device *mdiodev);
|
|
bool mdiobus_is_registered_device(struct mii_bus *bus, int addr);
|
|
struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr);
|
|
|
|
/**
|
|
* mdio_module_driver() - Helper macro for registering mdio drivers
|
|
* @_mdio_driver: driver to register
|
|
*
|
|
* Helper macro for MDIO drivers which do not do anything special in module
|
|
* init/exit. Each module may only use this macro once, and calling it
|
|
* replaces module_init() and module_exit().
|
|
*/
|
|
#define mdio_module_driver(_mdio_driver) \
|
|
static int __init mdio_module_init(void) \
|
|
{ \
|
|
return mdio_driver_register(&_mdio_driver); \
|
|
} \
|
|
module_init(mdio_module_init); \
|
|
static void __exit mdio_module_exit(void) \
|
|
{ \
|
|
mdio_driver_unregister(&_mdio_driver); \
|
|
} \
|
|
module_exit(mdio_module_exit)
|
|
|
|
#endif /* __LINUX_MDIO_H__ */
|