320 lines
8.1 KiB
C
320 lines
8.1 KiB
C
/*
|
|
* Copyright (c) 2008-2009 Atheros Communications Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <linux/nl80211.h>
|
|
#include <linux/pci.h>
|
|
#include "ath9k.h"
|
|
|
|
static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
|
|
{ PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
|
|
{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
|
|
{ PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */
|
|
{ PCI_VDEVICE(ATHEROS, 0x002C) }, /* PCI-E 802.11n bonded out */
|
|
{ PCI_VDEVICE(ATHEROS, 0x002D) }, /* PCI */
|
|
{ PCI_VDEVICE(ATHEROS, 0x002E) }, /* PCI-E */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0030) }, /* PCI-E AR9300 */
|
|
{ 0 }
|
|
};
|
|
|
|
/* return bus cachesize in 4B word units */
|
|
static void ath_pci_read_cachesize(struct ath_common *common, int *csz)
|
|
{
|
|
struct ath_softc *sc = (struct ath_softc *) common->priv;
|
|
u8 u8tmp;
|
|
|
|
pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE, &u8tmp);
|
|
*csz = (int)u8tmp;
|
|
|
|
/*
|
|
* This check was put in to avoid "unplesant" consequences if
|
|
* the bootrom has not fully initialized all PCI devices.
|
|
* Sometimes the cache line size register is not set
|
|
*/
|
|
|
|
if (*csz == 0)
|
|
*csz = DEFAULT_CACHELINE >> 2; /* Use the default size */
|
|
}
|
|
|
|
static bool ath_pci_eeprom_read(struct ath_common *common, u32 off, u16 *data)
|
|
{
|
|
struct ath_hw *ah = (struct ath_hw *) common->ah;
|
|
|
|
common->ops->read(ah, AR5416_EEPROM_OFFSET + (off << AR5416_EEPROM_S));
|
|
|
|
if (!ath9k_hw_wait(ah,
|
|
AR_EEPROM_STATUS_DATA,
|
|
AR_EEPROM_STATUS_DATA_BUSY |
|
|
AR_EEPROM_STATUS_DATA_PROT_ACCESS, 0,
|
|
AH_WAIT_TIMEOUT)) {
|
|
return false;
|
|
}
|
|
|
|
*data = MS(common->ops->read(ah, AR_EEPROM_STATUS_DATA),
|
|
AR_EEPROM_STATUS_DATA_VAL);
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Bluetooth coexistance requires disabling ASPM.
|
|
*/
|
|
static void ath_pci_bt_coex_prep(struct ath_common *common)
|
|
{
|
|
struct ath_softc *sc = (struct ath_softc *) common->priv;
|
|
struct pci_dev *pdev = to_pci_dev(sc->dev);
|
|
u8 aspm;
|
|
|
|
if (!pdev->is_pcie)
|
|
return;
|
|
|
|
pci_read_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, &aspm);
|
|
aspm &= ~(ATH_PCIE_CAP_LINK_L0S | ATH_PCIE_CAP_LINK_L1);
|
|
pci_write_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, aspm);
|
|
}
|
|
|
|
static const struct ath_bus_ops ath_pci_bus_ops = {
|
|
.ath_bus_type = ATH_PCI,
|
|
.read_cachesize = ath_pci_read_cachesize,
|
|
.eeprom_read = ath_pci_eeprom_read,
|
|
.bt_coex_prep = ath_pci_bt_coex_prep,
|
|
};
|
|
|
|
static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
void __iomem *mem;
|
|
struct ath_wiphy *aphy;
|
|
struct ath_softc *sc;
|
|
struct ieee80211_hw *hw;
|
|
u8 csz;
|
|
u16 subsysid;
|
|
u32 val;
|
|
int ret = 0;
|
|
char hw_name[64];
|
|
|
|
if (pci_enable_device(pdev))
|
|
return -EIO;
|
|
|
|
ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (ret) {
|
|
printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
|
|
goto err_dma;
|
|
}
|
|
|
|
ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (ret) {
|
|
printk(KERN_ERR "ath9k: 32-bit DMA consistent "
|
|
"DMA enable failed\n");
|
|
goto err_dma;
|
|
}
|
|
|
|
/*
|
|
* Cache line size is used to size and align various
|
|
* structures used to communicate with the hardware.
|
|
*/
|
|
pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
|
|
if (csz == 0) {
|
|
/*
|
|
* Linux 2.4.18 (at least) writes the cache line size
|
|
* register as a 16-bit wide register which is wrong.
|
|
* We must have this setup properly for rx buffer
|
|
* DMA to work so force a reasonable value here if it
|
|
* comes up zero.
|
|
*/
|
|
csz = L1_CACHE_BYTES / sizeof(u32);
|
|
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
|
|
}
|
|
/*
|
|
* The default setting of latency timer yields poor results,
|
|
* set it to the value used by other systems. It may be worth
|
|
* tweaking this setting more.
|
|
*/
|
|
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
|
|
|
|
pci_set_master(pdev);
|
|
|
|
/*
|
|
* Disable the RETRY_TIMEOUT register (0x41) to keep
|
|
* PCI Tx retries from interfering with C3 CPU state.
|
|
*/
|
|
pci_read_config_dword(pdev, 0x40, &val);
|
|
if ((val & 0x0000ff00) != 0)
|
|
pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
|
|
|
|
ret = pci_request_region(pdev, 0, "ath9k");
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "PCI memory region reserve error\n");
|
|
ret = -ENODEV;
|
|
goto err_region;
|
|
}
|
|
|
|
mem = pci_iomap(pdev, 0, 0);
|
|
if (!mem) {
|
|
printk(KERN_ERR "PCI memory map error\n") ;
|
|
ret = -EIO;
|
|
goto err_iomap;
|
|
}
|
|
|
|
hw = ieee80211_alloc_hw(sizeof(struct ath_wiphy) +
|
|
sizeof(struct ath_softc), &ath9k_ops);
|
|
if (!hw) {
|
|
dev_err(&pdev->dev, "No memory for ieee80211_hw\n");
|
|
ret = -ENOMEM;
|
|
goto err_alloc_hw;
|
|
}
|
|
|
|
SET_IEEE80211_DEV(hw, &pdev->dev);
|
|
pci_set_drvdata(pdev, hw);
|
|
|
|
aphy = hw->priv;
|
|
sc = (struct ath_softc *) (aphy + 1);
|
|
aphy->sc = sc;
|
|
aphy->hw = hw;
|
|
sc->pri_wiphy = aphy;
|
|
sc->hw = hw;
|
|
sc->dev = &pdev->dev;
|
|
sc->mem = mem;
|
|
|
|
/* Will be cleared in ath9k_start() */
|
|
sc->sc_flags |= SC_OP_INVALID;
|
|
|
|
ret = request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath9k", sc);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "request_irq failed\n");
|
|
goto err_irq;
|
|
}
|
|
|
|
sc->irq = pdev->irq;
|
|
|
|
pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsysid);
|
|
ret = ath9k_init_device(id->device, sc, subsysid, &ath_pci_bus_ops);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to initialize device\n");
|
|
goto err_init;
|
|
}
|
|
|
|
ath9k_hw_name(sc->sc_ah, hw_name, sizeof(hw_name));
|
|
wiphy_info(hw->wiphy, "%s mem=0x%lx, irq=%d\n",
|
|
hw_name, (unsigned long)mem, pdev->irq);
|
|
|
|
return 0;
|
|
|
|
err_init:
|
|
free_irq(sc->irq, sc);
|
|
err_irq:
|
|
ieee80211_free_hw(hw);
|
|
err_alloc_hw:
|
|
pci_iounmap(pdev, mem);
|
|
err_iomap:
|
|
pci_release_region(pdev, 0);
|
|
err_region:
|
|
/* Nothing */
|
|
err_dma:
|
|
pci_disable_device(pdev);
|
|
return ret;
|
|
}
|
|
|
|
static void ath_pci_remove(struct pci_dev *pdev)
|
|
{
|
|
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
|
|
struct ath_wiphy *aphy = hw->priv;
|
|
struct ath_softc *sc = aphy->sc;
|
|
void __iomem *mem = sc->mem;
|
|
|
|
ath9k_deinit_device(sc);
|
|
free_irq(sc->irq, sc);
|
|
ieee80211_free_hw(sc->hw);
|
|
|
|
pci_iounmap(pdev, mem);
|
|
pci_disable_device(pdev);
|
|
pci_release_region(pdev, 0);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
|
|
struct ath_wiphy *aphy = hw->priv;
|
|
struct ath_softc *sc = aphy->sc;
|
|
|
|
ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
|
|
|
|
pci_save_state(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath_pci_resume(struct pci_dev *pdev)
|
|
{
|
|
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
|
|
struct ath_wiphy *aphy = hw->priv;
|
|
struct ath_softc *sc = aphy->sc;
|
|
u32 val;
|
|
int err;
|
|
|
|
pci_restore_state(pdev);
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err)
|
|
return err;
|
|
|
|
/*
|
|
* Suspend/Resume resets the PCI configuration space, so we have to
|
|
* re-disable the RETRY_TIMEOUT register (0x41) to keep
|
|
* PCI Tx retries from interfering with C3 CPU state
|
|
*/
|
|
pci_read_config_dword(pdev, 0x40, &val);
|
|
if ((val & 0x0000ff00) != 0)
|
|
pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
|
|
|
|
/* Enable LED */
|
|
ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin,
|
|
AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
|
|
ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
|
|
|
|
static struct pci_driver ath_pci_driver = {
|
|
.name = "ath9k",
|
|
.id_table = ath_pci_id_table,
|
|
.probe = ath_pci_probe,
|
|
.remove = ath_pci_remove,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ath_pci_suspend,
|
|
.resume = ath_pci_resume,
|
|
#endif /* CONFIG_PM */
|
|
};
|
|
|
|
int ath_pci_init(void)
|
|
{
|
|
return pci_register_driver(&ath_pci_driver);
|
|
}
|
|
|
|
void ath_pci_exit(void)
|
|
{
|
|
pci_unregister_driver(&ath_pci_driver);
|
|
}
|