Baolin Wang bb4eecf23b mmc: Change the max discard sectors and erase response when HW busy detect ... When mmc host HW supports busy signalling (using R1B as response), don't use the host->max_busy_timeout as the limitation when deciding the max discard sectors, which we inform the generic BLOCK layer about. Instead, let's use at least one preferred erase size as the max discard sectors. In cases when the host controller supports HW busy signalling and the timeout for the erase operation doesn't exceed the max_busy_timeout, we keep the R1B response, otherwise we prevent the host from doing HW busy detection by converting to a R1 response. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>		2016-07-25 11:11:08 +02:00
..
Kconfig	mmc: pwrseq: convert to proper platform device	2016-05-02 10:33:30 +02:00
Makefile	mmc: pwrseq: convert to proper platform device	2016-05-02 10:33:30 +02:00
bus.c	mmc: core: implement enhanced strobe support	2016-07-25 10:34:05 +02:00
bus.h	mmc: rename dev_to_mmc_card() to mmc_dev_to_card()	2010-10-23 21:11:12 +08:00
core.c	mmc: Change the max discard sectors and erase response when HW busy detect	2016-07-25 11:11:08 +02:00
core.h	mmc: fix mmc_{un,}register_pm_notifier prototypes	2015-12-22 11:32:09 +01:00
debugfs.c	mmc: debugfs: add HS400 enhanced strobe description	2016-07-25 10:34:06 +02:00
host.c	mmc: core: expose MMC_CAP2_NO_* to dt	2016-07-25 10:34:49 +02:00
host.h	mmc: host: Add facility to support re-tuning	2015-06-01 09:06:53 +02:00
mmc.c	mmc: core: Extend sysfs with DSR register	2016-07-25 10:34:51 +02:00
mmc_ops.c	mmc: mmc: fix switch timeout issue caused by jiffies precision	2016-07-25 10:34:09 +02:00
mmc_ops.h	mmc: core: Convert __mmc_switch() into an internal core function	2015-10-26 15:59:54 +01:00
pwrseq.c	mmc: pwrseq: convert to proper platform device	2016-05-02 10:33:30 +02:00
pwrseq.h	mmc: pwrseq: convert to proper platform device	2016-05-02 10:33:30 +02:00
pwrseq_emmc.c	mmc: pwrseq: convert to proper platform device	2016-05-02 10:33:30 +02:00
pwrseq_simple.c	mmc: pwrseq: convert to proper platform device	2016-05-02 10:33:30 +02:00
quirks.c	mmc: core: Disable HPI for certain Hynix eMMC cards	2016-07-25 10:34:12 +02:00
sd.c	mmc: core: Extend sysfs with DSR register	2016-07-25 10:34:51 +02:00
sd.h	mmc: drop the speed mode of card's state	2014-05-12 18:05:53 -04:00
sd_ops.c	mmc: remove unnecessary assignment statements before return	2016-02-29 11:02:47 +01:00
sd_ops.h	mmc: add erase, secure erase, trim and secure trim operations	2010-08-12 08:43:30 -07:00
sdio.c	mmc: core: remove redundant memset of sdio_read_cccr	2016-03-17 14:54:41 +01:00
sdio_bus.c	mmc: enable MMC/SD/SDIO device to suspend/resume asynchronously	2015-12-22 11:32:16 +01:00
sdio_bus.h	…
sdio_cis.c	mmc: sdio: fall back to SDIO 1.0 for broken 1.1 cards	2016-05-16 11:31:27 +02:00
sdio_cis.h	…
sdio_io.c	mmc: sdio: Use multiple scatter/gather list	2012-12-06 13:54:43 -05:00
sdio_irq.c	mmc: core: Remove MMC_CLKGATE	2015-10-26 16:00:09 +01:00
sdio_ops.c	mmc: remove unnecessary assignment statements before return	2016-02-29 11:02:47 +01:00
sdio_ops.h	mmc: Add mmc_is_io_op helper function	2015-10-26 16:00:01 +01:00
slot-gpio.c	mmc: slot-gpio: Allow host driver to provide isr for card-detect interrupts	2015-01-19 09:56:29 +01:00
slot-gpio.h	mmc: slot-gpio: Make mmc_gpio_alloc() available for MMC core	2015-01-19 09:56:17 +01:00