381 lines
8.6 KiB
C
381 lines
8.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/* -------------------------------------------------------------------------
|
|
* Copyright (C) 2014-2016, Intel Corporation
|
|
*
|
|
* -------------------------------------------------------------------------
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/nfc.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <net/nfc/nfc.h>
|
|
#include <net/nfc/nci_core.h>
|
|
|
|
#include "fdp.h"
|
|
|
|
#define FDP_I2C_DRIVER_NAME "fdp_nci_i2c"
|
|
|
|
#define FDP_DP_CLOCK_TYPE_NAME "clock-type"
|
|
#define FDP_DP_CLOCK_FREQ_NAME "clock-freq"
|
|
#define FDP_DP_FW_VSC_CFG_NAME "fw-vsc-cfg"
|
|
|
|
#define FDP_FRAME_HEADROOM 2
|
|
#define FDP_FRAME_TAILROOM 1
|
|
|
|
#define FDP_NCI_I2C_MIN_PAYLOAD 5
|
|
#define FDP_NCI_I2C_MAX_PAYLOAD 261
|
|
|
|
#define FDP_POWER_OFF 0
|
|
#define FDP_POWER_ON 1
|
|
|
|
#define fdp_nci_i2c_dump_skb(dev, prefix, skb) \
|
|
print_hex_dump(KERN_DEBUG, prefix": ", DUMP_PREFIX_OFFSET, \
|
|
16, 1, (skb)->data, (skb)->len, 0)
|
|
|
|
static void fdp_nci_i2c_reset(struct fdp_i2c_phy *phy)
|
|
{
|
|
/* Reset RST/WakeUP for at least 100 micro-second */
|
|
gpiod_set_value_cansleep(phy->power_gpio, FDP_POWER_OFF);
|
|
usleep_range(1000, 4000);
|
|
gpiod_set_value_cansleep(phy->power_gpio, FDP_POWER_ON);
|
|
usleep_range(10000, 14000);
|
|
}
|
|
|
|
static int fdp_nci_i2c_enable(void *phy_id)
|
|
{
|
|
struct fdp_i2c_phy *phy = phy_id;
|
|
|
|
dev_dbg(&phy->i2c_dev->dev, "%s\n", __func__);
|
|
fdp_nci_i2c_reset(phy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fdp_nci_i2c_disable(void *phy_id)
|
|
{
|
|
struct fdp_i2c_phy *phy = phy_id;
|
|
|
|
dev_dbg(&phy->i2c_dev->dev, "%s\n", __func__);
|
|
fdp_nci_i2c_reset(phy);
|
|
}
|
|
|
|
static void fdp_nci_i2c_add_len_lrc(struct sk_buff *skb)
|
|
{
|
|
u8 lrc = 0;
|
|
u16 len, i;
|
|
|
|
/* Add length header */
|
|
len = skb->len;
|
|
*(u8 *)skb_push(skb, 1) = len & 0xff;
|
|
*(u8 *)skb_push(skb, 1) = len >> 8;
|
|
|
|
/* Compute and add lrc */
|
|
for (i = 0; i < len + 2; i++)
|
|
lrc ^= skb->data[i];
|
|
|
|
skb_put_u8(skb, lrc);
|
|
}
|
|
|
|
static void fdp_nci_i2c_remove_len_lrc(struct sk_buff *skb)
|
|
{
|
|
skb_pull(skb, FDP_FRAME_HEADROOM);
|
|
skb_trim(skb, skb->len - FDP_FRAME_TAILROOM);
|
|
}
|
|
|
|
static int fdp_nci_i2c_write(void *phy_id, struct sk_buff *skb)
|
|
{
|
|
struct fdp_i2c_phy *phy = phy_id;
|
|
struct i2c_client *client = phy->i2c_dev;
|
|
int r;
|
|
|
|
if (phy->hard_fault != 0)
|
|
return phy->hard_fault;
|
|
|
|
fdp_nci_i2c_add_len_lrc(skb);
|
|
fdp_nci_i2c_dump_skb(&client->dev, "fdp_wr", skb);
|
|
|
|
r = i2c_master_send(client, skb->data, skb->len);
|
|
if (r == -EREMOTEIO) { /* Retry, chip was in standby */
|
|
usleep_range(1000, 4000);
|
|
r = i2c_master_send(client, skb->data, skb->len);
|
|
}
|
|
|
|
if (r < 0 || r != skb->len)
|
|
dev_dbg(&client->dev, "%s: error err=%d len=%d\n",
|
|
__func__, r, skb->len);
|
|
|
|
if (r >= 0) {
|
|
if (r != skb->len) {
|
|
phy->hard_fault = r;
|
|
r = -EREMOTEIO;
|
|
} else {
|
|
r = 0;
|
|
}
|
|
}
|
|
|
|
fdp_nci_i2c_remove_len_lrc(skb);
|
|
|
|
return r;
|
|
}
|
|
|
|
static struct nfc_phy_ops i2c_phy_ops = {
|
|
.write = fdp_nci_i2c_write,
|
|
.enable = fdp_nci_i2c_enable,
|
|
.disable = fdp_nci_i2c_disable,
|
|
};
|
|
|
|
static int fdp_nci_i2c_read(struct fdp_i2c_phy *phy, struct sk_buff **skb)
|
|
{
|
|
int r, len;
|
|
u8 tmp[FDP_NCI_I2C_MAX_PAYLOAD], lrc, k;
|
|
u16 i;
|
|
struct i2c_client *client = phy->i2c_dev;
|
|
|
|
*skb = NULL;
|
|
|
|
/* Read the length packet and the data packet */
|
|
for (k = 0; k < 2; k++) {
|
|
|
|
len = phy->next_read_size;
|
|
|
|
r = i2c_master_recv(client, tmp, len);
|
|
if (r != len) {
|
|
dev_dbg(&client->dev, "%s: i2c recv err: %d\n",
|
|
__func__, r);
|
|
goto flush;
|
|
}
|
|
|
|
/* Check packet integruty */
|
|
for (lrc = i = 0; i < r; i++)
|
|
lrc ^= tmp[i];
|
|
|
|
/*
|
|
* LRC check failed. This may due to transmission error or
|
|
* desynchronization between driver and FDP. Drop the packet
|
|
* and force resynchronization
|
|
*/
|
|
if (lrc) {
|
|
dev_dbg(&client->dev, "%s: corrupted packet\n",
|
|
__func__);
|
|
phy->next_read_size = 5;
|
|
goto flush;
|
|
}
|
|
|
|
/* Packet that contains a length */
|
|
if (tmp[0] == 0 && tmp[1] == 0) {
|
|
phy->next_read_size = (tmp[2] << 8) + tmp[3] + 3;
|
|
} else {
|
|
phy->next_read_size = FDP_NCI_I2C_MIN_PAYLOAD;
|
|
|
|
*skb = alloc_skb(len, GFP_KERNEL);
|
|
if (*skb == NULL) {
|
|
r = -ENOMEM;
|
|
goto flush;
|
|
}
|
|
|
|
skb_put_data(*skb, tmp, len);
|
|
fdp_nci_i2c_dump_skb(&client->dev, "fdp_rd", *skb);
|
|
|
|
fdp_nci_i2c_remove_len_lrc(*skb);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
flush:
|
|
/* Flush the remaining data */
|
|
if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0)
|
|
r = -EREMOTEIO;
|
|
|
|
return r;
|
|
}
|
|
|
|
static irqreturn_t fdp_nci_i2c_irq_thread_fn(int irq, void *phy_id)
|
|
{
|
|
struct fdp_i2c_phy *phy = phy_id;
|
|
struct i2c_client *client;
|
|
struct sk_buff *skb;
|
|
int r;
|
|
|
|
if (!phy || irq != phy->i2c_dev->irq) {
|
|
WARN_ON_ONCE(1);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
client = phy->i2c_dev;
|
|
dev_dbg(&client->dev, "%s\n", __func__);
|
|
|
|
r = fdp_nci_i2c_read(phy, &skb);
|
|
|
|
if (r == -EREMOTEIO)
|
|
return IRQ_HANDLED;
|
|
else if (r == -ENOMEM || r == -EBADMSG)
|
|
return IRQ_HANDLED;
|
|
|
|
if (skb != NULL)
|
|
fdp_nci_recv_frame(phy->ndev, skb);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void fdp_nci_i2c_read_device_properties(struct device *dev,
|
|
u8 *clock_type, u32 *clock_freq,
|
|
u8 **fw_vsc_cfg)
|
|
{
|
|
int r;
|
|
u8 len;
|
|
|
|
r = device_property_read_u8(dev, FDP_DP_CLOCK_TYPE_NAME, clock_type);
|
|
if (r) {
|
|
dev_dbg(dev, "Using default clock type");
|
|
*clock_type = 0;
|
|
}
|
|
|
|
r = device_property_read_u32(dev, FDP_DP_CLOCK_FREQ_NAME, clock_freq);
|
|
if (r) {
|
|
dev_dbg(dev, "Using default clock frequency\n");
|
|
*clock_freq = 26000;
|
|
}
|
|
|
|
if (device_property_present(dev, FDP_DP_FW_VSC_CFG_NAME)) {
|
|
r = device_property_read_u8(dev, FDP_DP_FW_VSC_CFG_NAME,
|
|
&len);
|
|
|
|
if (r || len <= 0)
|
|
goto vsc_read_err;
|
|
|
|
/* Add 1 to the length to inclue the length byte itself */
|
|
len++;
|
|
|
|
*fw_vsc_cfg = devm_kmalloc_array(dev,
|
|
len, sizeof(**fw_vsc_cfg),
|
|
GFP_KERNEL);
|
|
|
|
r = device_property_read_u8_array(dev, FDP_DP_FW_VSC_CFG_NAME,
|
|
*fw_vsc_cfg, len);
|
|
|
|
if (r) {
|
|
devm_kfree(dev, *fw_vsc_cfg);
|
|
goto vsc_read_err;
|
|
}
|
|
} else {
|
|
vsc_read_err:
|
|
dev_dbg(dev, "FW vendor specific commands not present\n");
|
|
*fw_vsc_cfg = NULL;
|
|
}
|
|
|
|
dev_dbg(dev, "Clock type: %d, clock frequency: %d, VSC: %s",
|
|
*clock_type, *clock_freq, *fw_vsc_cfg != NULL ? "yes" : "no");
|
|
}
|
|
|
|
static const struct acpi_gpio_params power_gpios = { 0, 0, false };
|
|
|
|
static const struct acpi_gpio_mapping acpi_fdp_gpios[] = {
|
|
{ "power-gpios", &power_gpios, 1 },
|
|
{},
|
|
};
|
|
|
|
static int fdp_nci_i2c_probe(struct i2c_client *client)
|
|
{
|
|
struct fdp_i2c_phy *phy;
|
|
struct device *dev = &client->dev;
|
|
u8 *fw_vsc_cfg;
|
|
u8 clock_type;
|
|
u32 clock_freq;
|
|
int r = 0;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
|
nfc_err(dev, "No I2C_FUNC_I2C support\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Checking if we have an irq */
|
|
if (client->irq <= 0) {
|
|
nfc_err(dev, "IRQ not present\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
phy = devm_kzalloc(dev, sizeof(struct fdp_i2c_phy), GFP_KERNEL);
|
|
if (!phy)
|
|
return -ENOMEM;
|
|
|
|
phy->i2c_dev = client;
|
|
phy->next_read_size = FDP_NCI_I2C_MIN_PAYLOAD;
|
|
i2c_set_clientdata(client, phy);
|
|
|
|
r = devm_request_threaded_irq(dev, client->irq,
|
|
NULL, fdp_nci_i2c_irq_thread_fn,
|
|
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
|
|
FDP_I2C_DRIVER_NAME, phy);
|
|
|
|
if (r < 0) {
|
|
nfc_err(&client->dev, "Unable to register IRQ handler\n");
|
|
return r;
|
|
}
|
|
|
|
r = devm_acpi_dev_add_driver_gpios(dev, acpi_fdp_gpios);
|
|
if (r)
|
|
dev_dbg(dev, "Unable to add GPIO mapping table\n");
|
|
|
|
/* Requesting the power gpio */
|
|
phy->power_gpio = devm_gpiod_get(dev, "power", GPIOD_OUT_LOW);
|
|
if (IS_ERR(phy->power_gpio)) {
|
|
nfc_err(dev, "Power GPIO request failed\n");
|
|
return PTR_ERR(phy->power_gpio);
|
|
}
|
|
|
|
/* read device properties to get the clock and production settings */
|
|
fdp_nci_i2c_read_device_properties(dev, &clock_type, &clock_freq,
|
|
&fw_vsc_cfg);
|
|
|
|
/* Call the NFC specific probe function */
|
|
r = fdp_nci_probe(phy, &i2c_phy_ops, &phy->ndev,
|
|
FDP_FRAME_HEADROOM, FDP_FRAME_TAILROOM,
|
|
clock_type, clock_freq, fw_vsc_cfg);
|
|
if (r < 0) {
|
|
nfc_err(dev, "NCI probing error\n");
|
|
return r;
|
|
}
|
|
|
|
dev_dbg(dev, "I2C driver loaded\n");
|
|
return 0;
|
|
}
|
|
|
|
static int fdp_nci_i2c_remove(struct i2c_client *client)
|
|
{
|
|
struct fdp_i2c_phy *phy = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "%s\n", __func__);
|
|
|
|
fdp_nci_remove(phy->ndev);
|
|
fdp_nci_i2c_disable(phy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct acpi_device_id fdp_nci_i2c_acpi_match[] = {
|
|
{"INT339A", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, fdp_nci_i2c_acpi_match);
|
|
|
|
static struct i2c_driver fdp_nci_i2c_driver = {
|
|
.driver = {
|
|
.name = FDP_I2C_DRIVER_NAME,
|
|
.acpi_match_table = ACPI_PTR(fdp_nci_i2c_acpi_match),
|
|
},
|
|
.probe_new = fdp_nci_i2c_probe,
|
|
.remove = fdp_nci_i2c_remove,
|
|
};
|
|
module_i2c_driver(fdp_nci_i2c_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("I2C driver for Intel Fields Peak NFC controller");
|
|
MODULE_AUTHOR("Robert Dolca <robert.dolca@intel.com>");
|