824 lines
21 KiB
ArmAsm
824 lines
21 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
|
|
#include <soc/tegra/flowctrl.h>
|
|
#include <soc/tegra/fuse.h>
|
|
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/cache.h>
|
|
|
|
#include "irammap.h"
|
|
#include "sleep.h"
|
|
|
|
#define EMC_CFG 0xc
|
|
#define EMC_ADR_CFG 0x10
|
|
#define EMC_TIMING_CONTROL 0x28
|
|
#define EMC_NOP 0xdc
|
|
#define EMC_SELF_REF 0xe0
|
|
#define EMC_MRW 0xe8
|
|
#define EMC_FBIO_CFG5 0x104
|
|
#define EMC_AUTO_CAL_CONFIG 0x2a4
|
|
#define EMC_AUTO_CAL_INTERVAL 0x2a8
|
|
#define EMC_AUTO_CAL_STATUS 0x2ac
|
|
#define EMC_REQ_CTRL 0x2b0
|
|
#define EMC_CFG_DIG_DLL 0x2bc
|
|
#define EMC_EMC_STATUS 0x2b4
|
|
#define EMC_ZCAL_INTERVAL 0x2e0
|
|
#define EMC_ZQ_CAL 0x2ec
|
|
#define EMC_XM2VTTGENPADCTRL 0x310
|
|
#define EMC_XM2VTTGENPADCTRL2 0x314
|
|
|
|
#define PMC_CTRL 0x0
|
|
#define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /* enter LP0 when CPU pwr gated */
|
|
|
|
#define PMC_PLLP_WB0_OVERRIDE 0xf8
|
|
#define PMC_IO_DPD_REQ 0x1b8
|
|
#define PMC_IO_DPD_STATUS 0x1bc
|
|
|
|
#define CLK_RESET_CCLK_BURST 0x20
|
|
#define CLK_RESET_CCLK_DIVIDER 0x24
|
|
#define CLK_RESET_SCLK_BURST 0x28
|
|
#define CLK_RESET_SCLK_DIVIDER 0x2c
|
|
|
|
#define CLK_RESET_PLLC_BASE 0x80
|
|
#define CLK_RESET_PLLC_MISC 0x8c
|
|
#define CLK_RESET_PLLM_BASE 0x90
|
|
#define CLK_RESET_PLLM_MISC 0x9c
|
|
#define CLK_RESET_PLLP_BASE 0xa0
|
|
#define CLK_RESET_PLLP_MISC 0xac
|
|
#define CLK_RESET_PLLA_BASE 0xb0
|
|
#define CLK_RESET_PLLA_MISC 0xbc
|
|
#define CLK_RESET_PLLX_BASE 0xe0
|
|
#define CLK_RESET_PLLX_MISC 0xe4
|
|
#define CLK_RESET_PLLX_MISC3 0x518
|
|
#define CLK_RESET_PLLX_MISC3_IDDQ 3
|
|
#define CLK_RESET_PLLM_MISC_IDDQ 5
|
|
#define CLK_RESET_PLLC_MISC_IDDQ 26
|
|
|
|
#define CLK_RESET_CLK_SOURCE_MSELECT 0x3b4
|
|
|
|
#define MSELECT_CLKM (0x3 << 30)
|
|
|
|
#define LOCK_DELAY 50 /* safety delay after lock is detected */
|
|
|
|
#define TEGRA30_POWER_HOTPLUG_SHUTDOWN (1 << 27) /* Hotplug shutdown */
|
|
|
|
.macro emc_device_mask, rd, base
|
|
ldr \rd, [\base, #EMC_ADR_CFG]
|
|
tst \rd, #0x1
|
|
moveq \rd, #(0x1 << 8) @ just 1 device
|
|
movne \rd, #(0x3 << 8) @ 2 devices
|
|
.endm
|
|
|
|
.macro emc_timing_update, rd, base
|
|
mov \rd, #1
|
|
str \rd, [\base, #EMC_TIMING_CONTROL]
|
|
1001:
|
|
ldr \rd, [\base, #EMC_EMC_STATUS]
|
|
tst \rd, #(0x1<<23) @ wait EMC_STATUS_TIMING_UPDATE_STALLED is clear
|
|
bne 1001b
|
|
.endm
|
|
|
|
.macro pll_enable, rd, r_car_base, pll_base, pll_misc
|
|
ldr \rd, [\r_car_base, #\pll_base]
|
|
tst \rd, #(1 << 30)
|
|
orreq \rd, \rd, #(1 << 30)
|
|
streq \rd, [\r_car_base, #\pll_base]
|
|
/* Enable lock detector */
|
|
.if \pll_misc
|
|
ldr \rd, [\r_car_base, #\pll_misc]
|
|
bic \rd, \rd, #(1 << 18)
|
|
str \rd, [\r_car_base, #\pll_misc]
|
|
ldr \rd, [\r_car_base, #\pll_misc]
|
|
ldr \rd, [\r_car_base, #\pll_misc]
|
|
orr \rd, \rd, #(1 << 18)
|
|
str \rd, [\r_car_base, #\pll_misc]
|
|
.endif
|
|
.endm
|
|
|
|
.macro pll_locked, rd, r_car_base, pll_base
|
|
1:
|
|
ldr \rd, [\r_car_base, #\pll_base]
|
|
tst \rd, #(1 << 27)
|
|
beq 1b
|
|
.endm
|
|
|
|
.macro pll_iddq_exit, rd, car, iddq, iddq_bit
|
|
ldr \rd, [\car, #\iddq]
|
|
bic \rd, \rd, #(1<<\iddq_bit)
|
|
str \rd, [\car, #\iddq]
|
|
.endm
|
|
|
|
.macro pll_iddq_entry, rd, car, iddq, iddq_bit
|
|
ldr \rd, [\car, #\iddq]
|
|
orr \rd, \rd, #(1<<\iddq_bit)
|
|
str \rd, [\car, #\iddq]
|
|
.endm
|
|
|
|
#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
|
|
/*
|
|
* tegra30_hotplug_shutdown(void)
|
|
*
|
|
* Powergates the current CPU.
|
|
* Should never return.
|
|
*/
|
|
ENTRY(tegra30_hotplug_shutdown)
|
|
/* Powergate this CPU */
|
|
mov r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
|
|
bl tegra30_cpu_shutdown
|
|
ret lr @ should never get here
|
|
ENDPROC(tegra30_hotplug_shutdown)
|
|
|
|
/*
|
|
* tegra30_cpu_shutdown(unsigned long flags)
|
|
*
|
|
* Puts the current CPU in wait-for-event mode on the flow controller
|
|
* and powergates it -- flags (in R0) indicate the request type.
|
|
*
|
|
* r10 = SoC ID
|
|
* corrupts r0-r4, r10-r12
|
|
*/
|
|
ENTRY(tegra30_cpu_shutdown)
|
|
cpu_id r3
|
|
tegra_get_soc_id TEGRA_APB_MISC_VIRT, r10
|
|
cmp r10, #TEGRA30
|
|
bne _no_cpu0_chk @ It's not Tegra30
|
|
|
|
cmp r3, #0
|
|
reteq lr @ Must never be called for CPU 0
|
|
_no_cpu0_chk:
|
|
|
|
ldr r12, =TEGRA_FLOW_CTRL_VIRT
|
|
cpu_to_csr_reg r1, r3
|
|
add r1, r1, r12 @ virtual CSR address for this CPU
|
|
cpu_to_halt_reg r2, r3
|
|
add r2, r2, r12 @ virtual HALT_EVENTS address for this CPU
|
|
|
|
/*
|
|
* Clear this CPU's "event" and "interrupt" flags and power gate
|
|
* it when halting but not before it is in the "WFE" state.
|
|
*/
|
|
movw r12, \
|
|
FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG | \
|
|
FLOW_CTRL_CSR_ENABLE
|
|
cmp r10, #TEGRA30
|
|
moveq r4, #(1 << 4) @ wfe bitmap
|
|
movne r4, #(1 << 8) @ wfi bitmap
|
|
ARM( orr r12, r12, r4, lsl r3 )
|
|
THUMB( lsl r4, r4, r3 )
|
|
THUMB( orr r12, r12, r4 )
|
|
str r12, [r1]
|
|
|
|
/* Halt this CPU. */
|
|
mov r3, #0x400
|
|
delay_1:
|
|
subs r3, r3, #1 @ delay as a part of wfe war.
|
|
bge delay_1;
|
|
cpsid a @ disable imprecise aborts.
|
|
ldr r3, [r1] @ read CSR
|
|
str r3, [r1] @ clear CSR
|
|
|
|
tst r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
|
|
beq flow_ctrl_setting_for_lp2
|
|
|
|
/* flow controller set up for hotplug */
|
|
mov r3, #FLOW_CTRL_WAITEVENT @ For hotplug
|
|
b flow_ctrl_done
|
|
flow_ctrl_setting_for_lp2:
|
|
/* flow controller set up for LP2 */
|
|
cmp r10, #TEGRA30
|
|
moveq r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT @ For LP2
|
|
movne r3, #FLOW_CTRL_WAITEVENT
|
|
orrne r3, r3, #FLOW_CTRL_HALT_GIC_IRQ
|
|
orrne r3, r3, #FLOW_CTRL_HALT_GIC_FIQ
|
|
flow_ctrl_done:
|
|
cmp r10, #TEGRA30
|
|
str r3, [r2]
|
|
ldr r0, [r2]
|
|
b wfe_war
|
|
|
|
__cpu_reset_again:
|
|
dsb
|
|
.align 5
|
|
wfeeq @ CPU should be power gated here
|
|
wfine
|
|
wfe_war:
|
|
b __cpu_reset_again
|
|
|
|
/*
|
|
* 38 nop's, which fills rest of wfe cache line and
|
|
* 4 more cachelines with nop
|
|
*/
|
|
.rept 38
|
|
nop
|
|
.endr
|
|
b . @ should never get here
|
|
|
|
ENDPROC(tegra30_cpu_shutdown)
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
/*
|
|
* tegra30_sleep_core_finish(unsigned long v2p)
|
|
*
|
|
* Enters suspend in LP0 or LP1 by turning off the MMU and jumping to
|
|
* tegra30_tear_down_core in IRAM
|
|
*/
|
|
ENTRY(tegra30_sleep_core_finish)
|
|
mov r4, r0
|
|
/* Flush, disable the L1 data cache and exit SMP */
|
|
mov r0, #TEGRA_FLUSH_CACHE_ALL
|
|
bl tegra_disable_clean_inv_dcache
|
|
mov r0, r4
|
|
|
|
/*
|
|
* Preload all the address literals that are needed for the
|
|
* CPU power-gating process, to avoid loading from SDRAM which
|
|
* are not supported once SDRAM is put into self-refresh.
|
|
* LP0 / LP1 use physical address, since the MMU needs to be
|
|
* disabled before putting SDRAM into self-refresh to avoid
|
|
* memory access due to page table walks.
|
|
*/
|
|
mov32 r4, TEGRA_PMC_BASE
|
|
mov32 r5, TEGRA_CLK_RESET_BASE
|
|
mov32 r6, TEGRA_FLOW_CTRL_BASE
|
|
mov32 r7, TEGRA_TMRUS_BASE
|
|
|
|
mov32 r3, tegra_shut_off_mmu
|
|
add r3, r3, r0
|
|
|
|
mov32 r0, tegra30_tear_down_core
|
|
mov32 r1, tegra30_iram_start
|
|
sub r0, r0, r1
|
|
mov32 r1, TEGRA_IRAM_LPx_RESUME_AREA
|
|
add r0, r0, r1
|
|
|
|
ret r3
|
|
ENDPROC(tegra30_sleep_core_finish)
|
|
|
|
/*
|
|
* tegra30_sleep_cpu_secondary_finish(unsigned long v2p)
|
|
*
|
|
* Enters LP2 on secondary CPU by exiting coherency and powergating the CPU.
|
|
*/
|
|
ENTRY(tegra30_sleep_cpu_secondary_finish)
|
|
mov r7, lr
|
|
|
|
/* Flush and disable the L1 data cache */
|
|
mov r0, #TEGRA_FLUSH_CACHE_LOUIS
|
|
bl tegra_disable_clean_inv_dcache
|
|
|
|
/* Powergate this CPU. */
|
|
mov r0, #0 @ power mode flags (!hotplug)
|
|
bl tegra30_cpu_shutdown
|
|
mov r0, #1 @ never return here
|
|
ret r7
|
|
ENDPROC(tegra30_sleep_cpu_secondary_finish)
|
|
|
|
/*
|
|
* tegra30_tear_down_cpu
|
|
*
|
|
* Switches the CPU to enter sleep.
|
|
*/
|
|
ENTRY(tegra30_tear_down_cpu)
|
|
mov32 r6, TEGRA_FLOW_CTRL_BASE
|
|
|
|
b tegra30_enter_sleep
|
|
ENDPROC(tegra30_tear_down_cpu)
|
|
|
|
/* START OF ROUTINES COPIED TO IRAM */
|
|
.align L1_CACHE_SHIFT
|
|
.globl tegra30_iram_start
|
|
tegra30_iram_start:
|
|
|
|
/*
|
|
* tegra30_lp1_reset
|
|
*
|
|
* reset vector for LP1 restore; copied into IRAM during suspend.
|
|
* Brings the system back up to a safe staring point (SDRAM out of
|
|
* self-refresh, PLLC, PLLM and PLLP reenabled, CPU running on PLLX,
|
|
* system clock running on the same PLL that it suspended at), and
|
|
* jumps to tegra_resume to restore virtual addressing.
|
|
* The physical address of tegra_resume expected to be stored in
|
|
* PMC_SCRATCH41.
|
|
*
|
|
* NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA.
|
|
*/
|
|
ENTRY(tegra30_lp1_reset)
|
|
/*
|
|
* The CPU and system bus are running at 32KHz and executing from
|
|
* IRAM when this code is executed; immediately switch to CLKM and
|
|
* enable PLLP, PLLM, PLLC, PLLA and PLLX.
|
|
*/
|
|
mov32 r0, TEGRA_CLK_RESET_BASE
|
|
|
|
mov r1, #(1 << 28)
|
|
str r1, [r0, #CLK_RESET_SCLK_BURST]
|
|
str r1, [r0, #CLK_RESET_CCLK_BURST]
|
|
mov r1, #0
|
|
str r1, [r0, #CLK_RESET_CCLK_DIVIDER]
|
|
str r1, [r0, #CLK_RESET_SCLK_DIVIDER]
|
|
|
|
tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
|
|
cmp r10, #TEGRA30
|
|
beq _no_pll_iddq_exit
|
|
|
|
pll_iddq_exit r1, r0, CLK_RESET_PLLM_MISC, CLK_RESET_PLLM_MISC_IDDQ
|
|
pll_iddq_exit r1, r0, CLK_RESET_PLLC_MISC, CLK_RESET_PLLC_MISC_IDDQ
|
|
pll_iddq_exit r1, r0, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
|
|
|
|
mov32 r7, TEGRA_TMRUS_BASE
|
|
ldr r1, [r7]
|
|
add r1, r1, #2
|
|
wait_until r1, r7, r3
|
|
|
|
/* enable PLLM via PMC */
|
|
mov32 r2, TEGRA_PMC_BASE
|
|
ldr r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
|
|
orr r1, r1, #(1 << 12)
|
|
str r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
|
|
|
|
pll_enable r1, r0, CLK_RESET_PLLM_BASE, 0
|
|
pll_enable r1, r0, CLK_RESET_PLLC_BASE, 0
|
|
pll_enable r1, r0, CLK_RESET_PLLX_BASE, 0
|
|
|
|
b _pll_m_c_x_done
|
|
|
|
_no_pll_iddq_exit:
|
|
/* enable PLLM via PMC */
|
|
mov32 r2, TEGRA_PMC_BASE
|
|
ldr r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
|
|
orr r1, r1, #(1 << 12)
|
|
str r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
|
|
|
|
pll_enable r1, r0, CLK_RESET_PLLM_BASE, CLK_RESET_PLLM_MISC
|
|
pll_enable r1, r0, CLK_RESET_PLLC_BASE, CLK_RESET_PLLC_MISC
|
|
pll_enable r1, r0, CLK_RESET_PLLX_BASE, CLK_RESET_PLLX_MISC
|
|
|
|
_pll_m_c_x_done:
|
|
pll_enable r1, r0, CLK_RESET_PLLP_BASE, CLK_RESET_PLLP_MISC
|
|
pll_enable r1, r0, CLK_RESET_PLLA_BASE, CLK_RESET_PLLA_MISC
|
|
|
|
pll_locked r1, r0, CLK_RESET_PLLM_BASE
|
|
pll_locked r1, r0, CLK_RESET_PLLP_BASE
|
|
pll_locked r1, r0, CLK_RESET_PLLA_BASE
|
|
pll_locked r1, r0, CLK_RESET_PLLC_BASE
|
|
pll_locked r1, r0, CLK_RESET_PLLX_BASE
|
|
|
|
mov32 r7, TEGRA_TMRUS_BASE
|
|
ldr r1, [r7]
|
|
add r1, r1, #LOCK_DELAY
|
|
wait_until r1, r7, r3
|
|
|
|
adr r5, tegra_sdram_pad_save
|
|
|
|
ldr r4, [r5, #0x18] @ restore CLK_SOURCE_MSELECT
|
|
str r4, [r0, #CLK_RESET_CLK_SOURCE_MSELECT]
|
|
|
|
ldr r4, [r5, #0x1C] @ restore SCLK_BURST
|
|
str r4, [r0, #CLK_RESET_SCLK_BURST]
|
|
|
|
cmp r10, #TEGRA30
|
|
movweq r4, #:lower16:((1 << 28) | (0x8)) @ burst policy is PLLX
|
|
movteq r4, #:upper16:((1 << 28) | (0x8))
|
|
movwne r4, #:lower16:((1 << 28) | (0xe))
|
|
movtne r4, #:upper16:((1 << 28) | (0xe))
|
|
str r4, [r0, #CLK_RESET_CCLK_BURST]
|
|
|
|
/* Restore pad power state to normal */
|
|
ldr r1, [r5, #0x14] @ PMC_IO_DPD_STATUS
|
|
mvn r1, r1
|
|
bic r1, r1, #(1 << 31)
|
|
orr r1, r1, #(1 << 30)
|
|
str r1, [r2, #PMC_IO_DPD_REQ] @ DPD_OFF
|
|
|
|
cmp r10, #TEGRA30
|
|
movweq r0, #:lower16:TEGRA_EMC_BASE @ r0 reserved for emc base
|
|
movteq r0, #:upper16:TEGRA_EMC_BASE
|
|
cmp r10, #TEGRA114
|
|
movweq r0, #:lower16:TEGRA_EMC0_BASE
|
|
movteq r0, #:upper16:TEGRA_EMC0_BASE
|
|
cmp r10, #TEGRA124
|
|
movweq r0, #:lower16:TEGRA124_EMC_BASE
|
|
movteq r0, #:upper16:TEGRA124_EMC_BASE
|
|
|
|
exit_self_refresh:
|
|
ldr r1, [r5, #0xC] @ restore EMC_XM2VTTGENPADCTRL
|
|
str r1, [r0, #EMC_XM2VTTGENPADCTRL]
|
|
ldr r1, [r5, #0x10] @ restore EMC_XM2VTTGENPADCTRL2
|
|
str r1, [r0, #EMC_XM2VTTGENPADCTRL2]
|
|
ldr r1, [r5, #0x8] @ restore EMC_AUTO_CAL_INTERVAL
|
|
str r1, [r0, #EMC_AUTO_CAL_INTERVAL]
|
|
|
|
/* Relock DLL */
|
|
ldr r1, [r0, #EMC_CFG_DIG_DLL]
|
|
orr r1, r1, #(1 << 30) @ set DLL_RESET
|
|
str r1, [r0, #EMC_CFG_DIG_DLL]
|
|
|
|
emc_timing_update r1, r0
|
|
|
|
cmp r10, #TEGRA114
|
|
movweq r1, #:lower16:TEGRA_EMC1_BASE
|
|
movteq r1, #:upper16:TEGRA_EMC1_BASE
|
|
cmpeq r0, r1
|
|
|
|
ldr r1, [r0, #EMC_AUTO_CAL_CONFIG]
|
|
orr r1, r1, #(1 << 31) @ set AUTO_CAL_ACTIVE
|
|
orreq r1, r1, #(1 << 27) @ set slave mode for channel 1
|
|
str r1, [r0, #EMC_AUTO_CAL_CONFIG]
|
|
|
|
emc_wait_auto_cal_onetime:
|
|
ldr r1, [r0, #EMC_AUTO_CAL_STATUS]
|
|
tst r1, #(1 << 31) @ wait until AUTO_CAL_ACTIVE is cleared
|
|
bne emc_wait_auto_cal_onetime
|
|
|
|
ldr r1, [r0, #EMC_CFG]
|
|
bic r1, r1, #(1 << 31) @ disable DRAM_CLK_STOP_PD
|
|
str r1, [r0, #EMC_CFG]
|
|
|
|
mov r1, #0
|
|
str r1, [r0, #EMC_SELF_REF] @ take DRAM out of self refresh
|
|
mov r1, #1
|
|
cmp r10, #TEGRA30
|
|
streq r1, [r0, #EMC_NOP]
|
|
streq r1, [r0, #EMC_NOP]
|
|
|
|
emc_device_mask r1, r0
|
|
|
|
exit_selfrefresh_loop:
|
|
ldr r2, [r0, #EMC_EMC_STATUS]
|
|
ands r2, r2, r1
|
|
bne exit_selfrefresh_loop
|
|
|
|
lsr r1, r1, #8 @ devSel, bit0:dev0, bit1:dev1
|
|
|
|
mov32 r7, TEGRA_TMRUS_BASE
|
|
ldr r2, [r0, #EMC_FBIO_CFG5]
|
|
|
|
and r2, r2, #3 @ check DRAM_TYPE
|
|
cmp r2, #2
|
|
beq emc_lpddr2
|
|
|
|
/* Issue a ZQ_CAL for dev0 - DDR3 */
|
|
mov32 r2, 0x80000011 @ DEV_SELECTION=2, LENGTH=LONG, CMD=1
|
|
str r2, [r0, #EMC_ZQ_CAL]
|
|
ldr r2, [r7]
|
|
add r2, r2, #10
|
|
wait_until r2, r7, r3
|
|
|
|
tst r1, #2
|
|
beq zcal_done
|
|
|
|
/* Issue a ZQ_CAL for dev1 - DDR3 */
|
|
mov32 r2, 0x40000011 @ DEV_SELECTION=1, LENGTH=LONG, CMD=1
|
|
str r2, [r0, #EMC_ZQ_CAL]
|
|
ldr r2, [r7]
|
|
add r2, r2, #10
|
|
wait_until r2, r7, r3
|
|
b zcal_done
|
|
|
|
emc_lpddr2:
|
|
/* Issue a ZQ_CAL for dev0 - LPDDR2 */
|
|
mov32 r2, 0x800A00AB @ DEV_SELECTION=2, MA=10, OP=0xAB
|
|
str r2, [r0, #EMC_MRW]
|
|
ldr r2, [r7]
|
|
add r2, r2, #1
|
|
wait_until r2, r7, r3
|
|
|
|
tst r1, #2
|
|
beq zcal_done
|
|
|
|
/* Issue a ZQ_CAL for dev0 - LPDDR2 */
|
|
mov32 r2, 0x400A00AB @ DEV_SELECTION=1, MA=10, OP=0xAB
|
|
str r2, [r0, #EMC_MRW]
|
|
ldr r2, [r7]
|
|
add r2, r2, #1
|
|
wait_until r2, r7, r3
|
|
|
|
zcal_done:
|
|
mov r1, #0 @ unstall all transactions
|
|
str r1, [r0, #EMC_REQ_CTRL]
|
|
ldr r1, [r5, #0x4] @ restore EMC_ZCAL_INTERVAL
|
|
str r1, [r0, #EMC_ZCAL_INTERVAL]
|
|
ldr r1, [r5, #0x0] @ restore EMC_CFG
|
|
str r1, [r0, #EMC_CFG]
|
|
|
|
emc_timing_update r1, r0
|
|
|
|
/* Tegra114 had dual EMC channel, now config the other one */
|
|
cmp r10, #TEGRA114
|
|
bne __no_dual_emc_chanl
|
|
mov32 r1, TEGRA_EMC1_BASE
|
|
cmp r0, r1
|
|
movne r0, r1
|
|
addne r5, r5, #0x20
|
|
bne exit_self_refresh
|
|
__no_dual_emc_chanl:
|
|
|
|
mov32 r0, TEGRA_PMC_BASE
|
|
ldr r0, [r0, #PMC_SCRATCH41]
|
|
ret r0 @ jump to tegra_resume
|
|
ENDPROC(tegra30_lp1_reset)
|
|
|
|
.align L1_CACHE_SHIFT
|
|
tegra30_sdram_pad_address:
|
|
.word TEGRA_EMC_BASE + EMC_CFG @0x0
|
|
.word TEGRA_EMC_BASE + EMC_ZCAL_INTERVAL @0x4
|
|
.word TEGRA_EMC_BASE + EMC_AUTO_CAL_INTERVAL @0x8
|
|
.word TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL @0xc
|
|
.word TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL2 @0x10
|
|
.word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
|
|
.word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
|
|
.word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
|
|
tegra30_sdram_pad_address_end:
|
|
|
|
tegra114_sdram_pad_address:
|
|
.word TEGRA_EMC0_BASE + EMC_CFG @0x0
|
|
.word TEGRA_EMC0_BASE + EMC_ZCAL_INTERVAL @0x4
|
|
.word TEGRA_EMC0_BASE + EMC_AUTO_CAL_INTERVAL @0x8
|
|
.word TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL @0xc
|
|
.word TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL2 @0x10
|
|
.word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
|
|
.word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
|
|
.word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
|
|
.word TEGRA_EMC1_BASE + EMC_CFG @0x20
|
|
.word TEGRA_EMC1_BASE + EMC_ZCAL_INTERVAL @0x24
|
|
.word TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL @0x28
|
|
.word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL @0x2c
|
|
.word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2 @0x30
|
|
tegra114_sdram_pad_adress_end:
|
|
|
|
tegra124_sdram_pad_address:
|
|
.word TEGRA124_EMC_BASE + EMC_CFG @0x0
|
|
.word TEGRA124_EMC_BASE + EMC_ZCAL_INTERVAL @0x4
|
|
.word TEGRA124_EMC_BASE + EMC_AUTO_CAL_INTERVAL @0x8
|
|
.word TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL @0xc
|
|
.word TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL2 @0x10
|
|
.word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
|
|
.word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
|
|
.word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
|
|
tegra124_sdram_pad_address_end:
|
|
|
|
tegra30_sdram_pad_size:
|
|
.word tegra30_sdram_pad_address_end - tegra30_sdram_pad_address
|
|
|
|
tegra114_sdram_pad_size:
|
|
.word tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address
|
|
|
|
.type tegra_sdram_pad_save, %object
|
|
tegra_sdram_pad_save:
|
|
.rept (tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address) / 4
|
|
.long 0
|
|
.endr
|
|
|
|
/*
|
|
* tegra30_tear_down_core
|
|
*
|
|
* copied into and executed from IRAM
|
|
* puts memory in self-refresh for LP0 and LP1
|
|
*/
|
|
tegra30_tear_down_core:
|
|
bl tegra30_sdram_self_refresh
|
|
bl tegra30_switch_cpu_to_clk32k
|
|
b tegra30_enter_sleep
|
|
|
|
/*
|
|
* tegra30_switch_cpu_to_clk32k
|
|
*
|
|
* In LP0 and LP1 all PLLs will be turned off. Switching the CPU and System CLK
|
|
* to the 32KHz clock.
|
|
* r4 = TEGRA_PMC_BASE
|
|
* r5 = TEGRA_CLK_RESET_BASE
|
|
* r6 = TEGRA_FLOW_CTRL_BASE
|
|
* r7 = TEGRA_TMRUS_BASE
|
|
* r10= SoC ID
|
|
*/
|
|
tegra30_switch_cpu_to_clk32k:
|
|
/*
|
|
* start by jumping to CLKM to safely disable PLLs, then jump to
|
|
* CLKS.
|
|
*/
|
|
mov r0, #(1 << 28)
|
|
str r0, [r5, #CLK_RESET_SCLK_BURST]
|
|
/* 2uS delay delay between changing SCLK and CCLK */
|
|
ldr r1, [r7]
|
|
add r1, r1, #2
|
|
wait_until r1, r7, r9
|
|
str r0, [r5, #CLK_RESET_CCLK_BURST]
|
|
mov r0, #0
|
|
str r0, [r5, #CLK_RESET_CCLK_DIVIDER]
|
|
str r0, [r5, #CLK_RESET_SCLK_DIVIDER]
|
|
|
|
/* switch the clock source of mselect to be CLK_M */
|
|
ldr r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT]
|
|
orr r0, r0, #MSELECT_CLKM
|
|
str r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT]
|
|
|
|
/* 2uS delay delay between changing SCLK and disabling PLLs */
|
|
ldr r1, [r7]
|
|
add r1, r1, #2
|
|
wait_until r1, r7, r9
|
|
|
|
/* disable PLLM via PMC in LP1 */
|
|
ldr r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
|
|
bic r0, r0, #(1 << 12)
|
|
str r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
|
|
|
|
/* disable PLLP, PLLA, PLLC and PLLX */
|
|
ldr r0, [r5, #CLK_RESET_PLLP_BASE]
|
|
bic r0, r0, #(1 << 30)
|
|
str r0, [r5, #CLK_RESET_PLLP_BASE]
|
|
ldr r0, [r5, #CLK_RESET_PLLA_BASE]
|
|
bic r0, r0, #(1 << 30)
|
|
str r0, [r5, #CLK_RESET_PLLA_BASE]
|
|
ldr r0, [r5, #CLK_RESET_PLLC_BASE]
|
|
bic r0, r0, #(1 << 30)
|
|
str r0, [r5, #CLK_RESET_PLLC_BASE]
|
|
ldr r0, [r5, #CLK_RESET_PLLX_BASE]
|
|
bic r0, r0, #(1 << 30)
|
|
str r0, [r5, #CLK_RESET_PLLX_BASE]
|
|
|
|
cmp r10, #TEGRA30
|
|
beq _no_pll_in_iddq
|
|
pll_iddq_entry r1, r5, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
|
|
_no_pll_in_iddq:
|
|
|
|
/* switch to CLKS */
|
|
mov r0, #0 /* brust policy = 32KHz */
|
|
str r0, [r5, #CLK_RESET_SCLK_BURST]
|
|
|
|
ret lr
|
|
|
|
/*
|
|
* tegra30_enter_sleep
|
|
*
|
|
* uses flow controller to enter sleep state
|
|
* executes from IRAM with SDRAM in selfrefresh when target state is LP0 or LP1
|
|
* executes from SDRAM with target state is LP2
|
|
* r6 = TEGRA_FLOW_CTRL_BASE
|
|
*/
|
|
tegra30_enter_sleep:
|
|
cpu_id r1
|
|
|
|
cpu_to_csr_reg r2, r1
|
|
ldr r0, [r6, r2]
|
|
orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
|
|
orr r0, r0, #FLOW_CTRL_CSR_ENABLE
|
|
str r0, [r6, r2]
|
|
|
|
tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
|
|
cmp r10, #TEGRA30
|
|
mov r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT
|
|
orreq r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ
|
|
orrne r0, r0, #FLOW_CTRL_HALT_LIC_IRQ | FLOW_CTRL_HALT_LIC_FIQ
|
|
|
|
cpu_to_halt_reg r2, r1
|
|
str r0, [r6, r2]
|
|
dsb
|
|
ldr r0, [r6, r2] /* memory barrier */
|
|
|
|
halted:
|
|
isb
|
|
dsb
|
|
wfi /* CPU should be power gated here */
|
|
|
|
/* !!!FIXME!!! Implement halt failure handler */
|
|
b halted
|
|
|
|
/*
|
|
* tegra30_sdram_self_refresh
|
|
*
|
|
* called with MMU off and caches disabled
|
|
* must be executed from IRAM
|
|
* r4 = TEGRA_PMC_BASE
|
|
* r5 = TEGRA_CLK_RESET_BASE
|
|
* r6 = TEGRA_FLOW_CTRL_BASE
|
|
* r7 = TEGRA_TMRUS_BASE
|
|
* r10= SoC ID
|
|
*/
|
|
tegra30_sdram_self_refresh:
|
|
|
|
adr r8, tegra_sdram_pad_save
|
|
tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
|
|
cmp r10, #TEGRA30
|
|
adreq r2, tegra30_sdram_pad_address
|
|
ldreq r3, tegra30_sdram_pad_size
|
|
cmp r10, #TEGRA114
|
|
adreq r2, tegra114_sdram_pad_address
|
|
ldreq r3, tegra114_sdram_pad_size
|
|
cmp r10, #TEGRA124
|
|
adreq r2, tegra124_sdram_pad_address
|
|
ldreq r3, tegra30_sdram_pad_size
|
|
|
|
mov r9, #0
|
|
|
|
padsave:
|
|
ldr r0, [r2, r9] @ r0 is the addr in the pad_address
|
|
|
|
ldr r1, [r0]
|
|
str r1, [r8, r9] @ save the content of the addr
|
|
|
|
add r9, r9, #4
|
|
cmp r3, r9
|
|
bne padsave
|
|
padsave_done:
|
|
|
|
dsb
|
|
|
|
cmp r10, #TEGRA30
|
|
ldreq r0, =TEGRA_EMC_BASE @ r0 reserved for emc base addr
|
|
cmp r10, #TEGRA114
|
|
ldreq r0, =TEGRA_EMC0_BASE
|
|
cmp r10, #TEGRA124
|
|
ldreq r0, =TEGRA124_EMC_BASE
|
|
|
|
enter_self_refresh:
|
|
cmp r10, #TEGRA30
|
|
mov r1, #0
|
|
str r1, [r0, #EMC_ZCAL_INTERVAL]
|
|
str r1, [r0, #EMC_AUTO_CAL_INTERVAL]
|
|
ldr r1, [r0, #EMC_CFG]
|
|
bic r1, r1, #(1 << 28)
|
|
bicne r1, r1, #(1 << 29)
|
|
str r1, [r0, #EMC_CFG] @ disable DYN_SELF_REF
|
|
|
|
emc_timing_update r1, r0
|
|
|
|
ldr r1, [r7]
|
|
add r1, r1, #5
|
|
wait_until r1, r7, r2
|
|
|
|
emc_wait_auto_cal:
|
|
ldr r1, [r0, #EMC_AUTO_CAL_STATUS]
|
|
tst r1, #(1 << 31) @ wait until AUTO_CAL_ACTIVE is cleared
|
|
bne emc_wait_auto_cal
|
|
|
|
mov r1, #3
|
|
str r1, [r0, #EMC_REQ_CTRL] @ stall incoming DRAM requests
|
|
|
|
emcidle:
|
|
ldr r1, [r0, #EMC_EMC_STATUS]
|
|
tst r1, #4
|
|
beq emcidle
|
|
|
|
mov r1, #1
|
|
str r1, [r0, #EMC_SELF_REF]
|
|
|
|
emc_device_mask r1, r0
|
|
|
|
emcself:
|
|
ldr r2, [r0, #EMC_EMC_STATUS]
|
|
and r2, r2, r1
|
|
cmp r2, r1
|
|
bne emcself @ loop until DDR in self-refresh
|
|
|
|
/* Put VTTGEN in the lowest power mode */
|
|
ldr r1, [r0, #EMC_XM2VTTGENPADCTRL]
|
|
mov32 r2, 0xF8F8FFFF @ clear XM2VTTGEN_DRVUP and XM2VTTGEN_DRVDN
|
|
and r1, r1, r2
|
|
str r1, [r0, #EMC_XM2VTTGENPADCTRL]
|
|
ldr r1, [r0, #EMC_XM2VTTGENPADCTRL2]
|
|
cmp r10, #TEGRA30
|
|
orreq r1, r1, #7 @ set E_NO_VTTGEN
|
|
orrne r1, r1, #0x3f
|
|
str r1, [r0, #EMC_XM2VTTGENPADCTRL2]
|
|
|
|
emc_timing_update r1, r0
|
|
|
|
/* Tegra114 had dual EMC channel, now config the other one */
|
|
cmp r10, #TEGRA114
|
|
bne no_dual_emc_chanl
|
|
mov32 r1, TEGRA_EMC1_BASE
|
|
cmp r0, r1
|
|
movne r0, r1
|
|
bne enter_self_refresh
|
|
no_dual_emc_chanl:
|
|
|
|
ldr r1, [r4, #PMC_CTRL]
|
|
tst r1, #PMC_CTRL_SIDE_EFFECT_LP0
|
|
bne pmc_io_dpd_skip
|
|
/*
|
|
* Put DDR_DATA, DISC_ADDR_CMD, DDR_ADDR_CMD, POP_ADDR_CMD, POP_CLK
|
|
* and COMP in the lowest power mode when LP1.
|
|
*/
|
|
mov32 r1, 0x8EC00000
|
|
str r1, [r4, #PMC_IO_DPD_REQ]
|
|
pmc_io_dpd_skip:
|
|
|
|
dsb
|
|
|
|
ret lr
|
|
|
|
.ltorg
|
|
/* dummy symbol for end of IRAM */
|
|
.align L1_CACHE_SHIFT
|
|
.global tegra30_iram_end
|
|
tegra30_iram_end:
|
|
b .
|
|
#endif
|