OpenCloudOS-Kernel/drivers/usb
Rafał Miłecki d6b76c4ddb USB: bcma: support old USB 2.0 controller on Northstar devices
Currently bcma-hcd driver handles 3 different bcma cores:
1) BCMA_CORE_USB20_HOST (0x819)
2) BCMA_CORE_NS_USB20 (0x504)
3) BCMA_CORE_NS_USB30 (0x505)

The first one was introduced years ago and so far was used on MIPS
devices only. All Northstar (ARM) devices were using other two cores
which allowed easy implementation of separated initialization paths.

It seems however Broadcom decided to reuse this old USB 2.0 controller
on some recently introduced cheaper Northstar BCM53573 SoCs. I noticed
this on Tenda AC9 (based on BCM47189B0 belonging to BCM53573 family).

There is no difference in this old controller core identification
between MIPS and ARM devices: they share the same id and revision. We
need different controller initialization procedure however.
To handle this add a check for architecture and implement required
initialization for ARM case.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-15 16:25:59 +02:00
..
atm usb: atm: usbatm: don't print error when allocating urb fails 2016-08-15 15:54:25 +02:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea usb: chipidea: Kconfig: improve Kconfig help text 2016-06-21 10:48:30 +08:00
class cdc-wdm: cleanup debug messages 2016-08-15 16:25:58 +02:00
common usb: ulpi: Automatically set driver::owner with ulpi_driver_register() 2016-08-09 16:06:49 +02:00
core usb: core: of.c: fix defined but not declare warning 2016-08-09 16:16:13 +02:00
dwc2 usb: dwc2: Remove deprecated create_singlethread_workqueue 2016-08-09 15:49:01 +02:00
dwc3 usb: remove redundant dependency on USB_SUPPORT 2016-08-09 16:15:44 +02:00
early usb: early/ehci-dbgp: make it explicitly non-modular 2016-06-26 11:48:18 -07:00
gadget media updates for v4.8-rc1 2016-07-26 18:59:59 -07:00
host USB: bcma: support old USB 2.0 controller on Northstar devices 2016-08-15 16:25:59 +02:00
image usb: microtek: Use "foo *bar" instead of "foo * bar". 2016-06-07 22:18:39 -07:00
isp1760 usb: Remove unnecessary space before open square bracket. 2016-05-09 13:08:46 +02:00
misc usb: misc: yurex: don't print error when allocating urb fails 2016-08-15 15:54:27 +02:00
mon usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock 2016-02-06 21:55:57 -08:00
musb usb: musb: sunxi: Simplify dr_mode handling 2016-07-17 08:23:57 +09:00
phy usb: phy: move msm_hsusb.h into driver 2016-06-21 11:12:10 +03:00
renesas_usbhs usb: renesas_usbhs: protect the CFIFOSEL setting in usbhsg_ep_enable() 2016-06-29 11:14:44 +03:00
serial USB: serial: use variable for status 2016-07-16 12:45:39 +02:00
storage usb: storage: usb: don't print error when allocating urb fails 2016-08-15 15:54:27 +02:00
usbip usbip: vhci_hcd: fix return value check in add_platform_device() 2016-08-15 16:25:59 +02:00
wusbcore usb: wusbcore: wa-xfer: don't print error when allocating urb fails 2016-08-15 15:54:27 +02:00
Kconfig usb: common: rework CONFIG_USB_COMMON logic 2016-04-18 15:23:36 +03:00
Makefile usb: fsl: drop USB_FSL_MPH_DR_OF Kconfig symbol 2016-03-04 15:14:29 +02:00
README
usb-skeleton.c usb: usb-skeleton: don't print error when allocating urb fails 2016-08-15 15:54:27 +02:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.