OpenCloudOS-Kernel/drivers/pinctrl/qcom
Linus Torvalds 0dcf60d001 asm-generic: build fixes for v5.15
There is one build fix for Arm platforms that ended up impacting most
 architectures because of the way the drivers/firmware Kconfig file is
 wired up:
 
 The CONFIG_QCOM_SCM dependency have caused a number of randconfig
 regressions over time, and some still remain in v5.15-rc4. The
 fix we agreed on in the end is to make this symbol selected by any
 driver using it, and then building it even for non-Arm platforms with
 CONFIG_COMPILE_TEST.
 
 To make this work on all architectures, the drivers/firmware/Kconfig
 file needs to be included for all architectures to make the symbol
 itself visible.
 
 In a separate discussion, we found that a sound driver patch that is
 pending for v5.16 needs the same change to include this Kconfig file,
 so the easiest solution seems to have my Kconfig rework included in v5.15.
 
 There is a small merge conflict against an earlier partial fix for the
 QCOM_SCM dependency problems.
 
 Finally, the branch also includes a small unrelated build fix for NOMMU
 architectures.
 
 Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/
 Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/
 Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFgVp8ACgkQmmx57+YA
 GNlQoA/+O0ljtTy5D0MjRGmFDs11M5AtKNrfys82lm2GeEnc4lnxn722jLk8kR6s
 y6DSOWFs7w1bqhKExQNehZYtJO3sgW/9qiLMV9qfOx1Nc6WwhDPcYM9bMyGlpTmL
 M456nh8NopixV7slanNtfz1e0kbMKoK+4Ub7M5OHepK6x9FKQXQYQpeoBxaXHmWZ
 9eaRiL/CsRHO/cSkvpq1GtL7IVrudvij3FDHzxoDGFFjkCUm9LiN/8yrnVxHA9G7
 3EPyJazI559SsnxXJR32udGPJWZV1HZ7D5gbxDvzr5rZ9EX0JpyPGJsuXUR1wqlS
 UB2Y7AUTSxkwDiZ8UhPoXn6i67WAirzEsP2WmdS4v6NEbxlNloLGTIeGwcwkCRMU
 DBvMtDW8kKusgVu/OkEUgoC6MTRt+Mg+gZcQI/C4sp0MqZGaMY6c7abnYjqwEzBV
 ARS7bUYyME2GL6wNDPFB8esuD9jjdFXy96bGHATmzMxT3012K3X7ufFOzJZ+GOF9
 pan00fgoC17oiI+Xu/sZEHns6KvMTSE11Aw3uk+yhHxYtZbzWi2B5Nk+4tBdsOxF
 PAZdZ5qsyuEcBw+PyfbyZIHWOrlbvZkrmjiIsMJo63cIXuOtgraCjvRRAwe/ZwoU
 PXgPcUmrlAs06WjKhuQAZWt6bww7cEP2XyOYlDqwZ4Vj0dqav6g=
 =187C
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic fixes from Arnd Bergmann:
 "There is one build fix for Arm platforms that ended up impacting most
  architectures because of the way the drivers/firmware Kconfig file is
  wired up:

  The CONFIG_QCOM_SCM dependency have caused a number of randconfig
  regressions over time, and some still remain in v5.15-rc4. The fix we
  agreed on in the end is to make this symbol selected by any driver
  using it, and then building it even for non-Arm platforms with
  CONFIG_COMPILE_TEST.

  To make this work on all architectures, the drivers/firmware/Kconfig
  file needs to be included for all architectures to make the symbol
  itself visible.

  In a separate discussion, we found that a sound driver patch that is
  pending for v5.16 needs the same change to include this Kconfig file,
  so the easiest solution seems to have my Kconfig rework included in
  v5.15.

  Finally, the branch also includes a small unrelated build fix for
  NOMMU architectures"

Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/
Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/

* tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere
  qcom_scm: hide Kconfig symbol
  firmware: include drivers/firmware/Kconfig unconditionally
2021-10-08 11:57:54 -07:00
..
Kconfig qcom_scm: hide Kconfig symbol 2021-10-07 16:51:57 +02:00
Makefile drivers: qcom: pinctrl: Add pinctrl driver for sm6115 2021-07-31 23:23:06 +02:00
pinctrl-apq8064.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-apq8084.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-ipq4019.c pinctrl: qcom: ipq4019: add open drain support 2020-07-16 10:46:24 +02:00
pinctrl-ipq6018.c pinctrl: qcom: ipq6018 Add missing pins in qpic pin group 2020-06-20 22:05:24 +02:00
pinctrl-ipq8064.c ipq8064: pinctrl: Fixed missing RGMII pincontrol definitions 2020-02-21 16:23:26 +01:00
pinctrl-ipq8074.c pinctrl: qcom: ipq8074: route gpio interrupts to APPS 2020-07-11 23:11:00 +02:00
pinctrl-lpass-lpi.c pinctrl: qcom: lpass lpi: use default pullup/strength values 2021-03-11 00:13:07 +01:00
pinctrl-mdm9607.c pinctrl: qcom: Add MDM9607 pinctrl driver 2021-07-23 17:44:13 +02:00
pinctrl-mdm9615.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-msm.c pinctrl: Bulk conversion to generic_handle_domain_irq() 2021-08-12 11:39:39 +01:00
pinctrl-msm.h pinctrl: qcom: Allow SoCs to specify a GPIO function that's not 0 2021-01-18 16:07:08 +01:00
pinctrl-msm8x74.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-msm8226.c pinctrl: qcom: Add msm8226 pinctrl driver. 2020-08-27 10:27:14 +02:00
pinctrl-msm8660.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-msm8916.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-msm8953.c pinctrl: qcom: add pinctrl driver for msm8953 2020-11-10 14:58:14 +01:00
pinctrl-msm8960.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-msm8976.c pinctrl: qcom: pinctrl-msm8976: Remove unused variable 'nav_tsync_groups' 2020-07-16 15:12:38 +02:00
pinctrl-msm8994.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-msm8996.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-msm8998.c pinctrl: msm8998: Squash TSIF pins together 2019-07-29 23:28:57 +02:00
pinctrl-qcs404.c This is the bulk of pin control changes for the v5.1 kernel cycle. 2019-03-11 11:12:50 -07:00
pinctrl-qdf2xxx.c pinctrl: qdf2xxx: Switch to use device_property_count_uXX() 2019-08-05 12:01:45 +02:00
pinctrl-sc7180.c pinctrl: qcom: Handle broken/missing PDC dual edge IRQs on sc7180 2020-07-16 15:41:41 +02:00
pinctrl-sc7280.c pinctrl: qcom: sc7280: Add PM suspend callbacks 2021-09-23 23:09:14 +02:00
pinctrl-sc8180x.c pinctrl: qcom: sc8180x: add ACPI probe support 2021-03-15 17:30:29 +01:00
pinctrl-sdm660.c pinctrl: sdm660: Set tile property for pingroups 2018-11-19 15:40:55 +01:00
pinctrl-sdm845.c pinctrl: remove empty lines in pinctrl subsystem 2021-01-05 16:09:24 +01:00
pinctrl-sdx55.c pinctrl: qcom: Fix duplication in gpio_groups 2021-06-07 00:18:55 +02:00
pinctrl-sm6115.c drivers: qcom: pinctrl: Add pinctrl driver for sm6115 2021-07-31 23:23:06 +02:00
pinctrl-sm6125.c drivers: qcom: pinctrl: Add pinctrl driver for sm6125 2021-06-18 11:21:45 +02:00
pinctrl-sm8150.c pinctrl: qcom: Add SM8150 pinctrl driver 2019-07-04 09:47:13 +02:00
pinctrl-sm8250.c pinctrl: qcom: sm8250: Specify PDC map 2020-11-10 14:57:05 +01:00
pinctrl-sm8350.c pinctrl: qcom: sm8350: add GPIO wakeup interrupt map 2021-03-15 17:14:42 +01:00
pinctrl-spmi-gpio.c pinctrl: qcom: spmi-gpio: correct parent irqspec translation 2021-09-17 01:06:44 +02:00
pinctrl-spmi-mpp.c pinctrl: qcom: spmi-mpp: Add compatible for pmi8994 2021-05-19 02:23:52 +02:00
pinctrl-ssbi-gpio.c pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword 2020-07-20 15:38:27 +02:00
pinctrl-ssbi-mpp.c pinctrl: remove empty lines in pinctrl subsystem 2021-01-05 16:09:24 +01:00