1667 lines
46 KiB
C
1667 lines
46 KiB
C
/******************************************************************************
|
|
*
|
|
* Name: actbl1.h - Additional ACPI table definitions
|
|
*
|
|
*****************************************************************************/
|
|
|
|
/*
|
|
* Copyright (C) 2000 - 2018, Intel Corp.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification.
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
* substantially similar to the "NO WARRANTY" disclaimer below
|
|
* ("Disclaimer") and any redistribution must be conditioned upon
|
|
* including a substantially similar Disclaimer requirement for further
|
|
* binary redistribution.
|
|
* 3. Neither the names of the above-listed copyright holders nor the names
|
|
* of any contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") version 2 as published by the Free
|
|
* Software Foundation.
|
|
*
|
|
* NO WARRANTY
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGES.
|
|
*/
|
|
|
|
#ifndef __ACTBL1_H__
|
|
#define __ACTBL1_H__
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* Additional ACPI Tables (1)
|
|
*
|
|
* These tables are not consumed directly by the ACPICA subsystem, but are
|
|
* included here to support device drivers and the AML disassembler.
|
|
*
|
|
* The tables in this file are fully defined within the ACPI specification.
|
|
*
|
|
******************************************************************************/
|
|
|
|
/*
|
|
* Values for description table header signatures for tables defined in this
|
|
* file. Useful because they make it more difficult to inadvertently type in
|
|
* the wrong signature.
|
|
*/
|
|
#define ACPI_SIG_BERT "BERT" /* Boot Error Record Table */
|
|
#define ACPI_SIG_CPEP "CPEP" /* Corrected Platform Error Polling table */
|
|
#define ACPI_SIG_ECDT "ECDT" /* Embedded Controller Boot Resources Table */
|
|
#define ACPI_SIG_EINJ "EINJ" /* Error Injection table */
|
|
#define ACPI_SIG_ERST "ERST" /* Error Record Serialization Table */
|
|
#define ACPI_SIG_HMAT "HMAT" /* Heterogeneous Memory Attributes Table */
|
|
#define ACPI_SIG_HEST "HEST" /* Hardware Error Source Table */
|
|
#define ACPI_SIG_MADT "APIC" /* Multiple APIC Description Table */
|
|
#define ACPI_SIG_MSCT "MSCT" /* Maximum System Characteristics Table */
|
|
#define ACPI_SIG_PDTT "PDTT" /* Platform Debug Trigger Table */
|
|
#define ACPI_SIG_PPTT "PPTT" /* Processor Properties Topology Table */
|
|
#define ACPI_SIG_SBST "SBST" /* Smart Battery Specification Table */
|
|
#define ACPI_SIG_SDEV "SDEV" /* Secure Devices table */
|
|
#define ACPI_SIG_SLIT "SLIT" /* System Locality Distance Information Table */
|
|
#define ACPI_SIG_SRAT "SRAT" /* System Resource Affinity Table */
|
|
#define ACPI_SIG_NFIT "NFIT" /* NVDIMM Firmware Interface Table */
|
|
|
|
/*
|
|
* All tables must be byte-packed to match the ACPI specification, since
|
|
* the tables are provided by the system BIOS.
|
|
*/
|
|
#pragma pack(1)
|
|
|
|
/*
|
|
* Note: C bitfields are not used for this reason:
|
|
*
|
|
* "Bitfields are great and easy to read, but unfortunately the C language
|
|
* does not specify the layout of bitfields in memory, which means they are
|
|
* essentially useless for dealing with packed data in on-disk formats or
|
|
* binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
|
|
* this decision was a design error in C. Ritchie could have picked an order
|
|
* and stuck with it." Norman Ramsey.
|
|
* See http://stackoverflow.com/a/1053662/41661
|
|
*/
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* Common subtable headers
|
|
*
|
|
******************************************************************************/
|
|
|
|
/* Generic subtable header (used in MADT, SRAT, etc.) */
|
|
|
|
struct acpi_subtable_header {
|
|
u8 type;
|
|
u8 length;
|
|
};
|
|
|
|
/* Subtable header for WHEA tables (EINJ, ERST, WDAT) */
|
|
|
|
struct acpi_whea_header {
|
|
u8 action;
|
|
u8 instruction;
|
|
u8 flags;
|
|
u8 reserved;
|
|
struct acpi_generic_address register_region;
|
|
u64 value; /* Value used with Read/Write register */
|
|
u64 mask; /* Bitmask required for this register instruction */
|
|
};
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* BERT - Boot Error Record Table (ACPI 4.0)
|
|
* Version 1
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct acpi_table_bert {
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
u32 region_length; /* Length of the boot error region */
|
|
u64 address; /* Physical address of the error region */
|
|
};
|
|
|
|
/* Boot Error Region (not a subtable, pointed to by Address field above) */
|
|
|
|
struct acpi_bert_region {
|
|
u32 block_status; /* Type of error information */
|
|
u32 raw_data_offset; /* Offset to raw error data */
|
|
u32 raw_data_length; /* Length of raw error data */
|
|
u32 data_length; /* Length of generic error data */
|
|
u32 error_severity; /* Severity code */
|
|
};
|
|
|
|
/* Values for block_status flags above */
|
|
|
|
#define ACPI_BERT_UNCORRECTABLE (1)
|
|
#define ACPI_BERT_CORRECTABLE (1<<1)
|
|
#define ACPI_BERT_MULTIPLE_UNCORRECTABLE (1<<2)
|
|
#define ACPI_BERT_MULTIPLE_CORRECTABLE (1<<3)
|
|
#define ACPI_BERT_ERROR_ENTRY_COUNT (0xFF<<4) /* 8 bits, error count */
|
|
|
|
/* Values for error_severity above */
|
|
|
|
enum acpi_bert_error_severity {
|
|
ACPI_BERT_ERROR_CORRECTABLE = 0,
|
|
ACPI_BERT_ERROR_FATAL = 1,
|
|
ACPI_BERT_ERROR_CORRECTED = 2,
|
|
ACPI_BERT_ERROR_NONE = 3,
|
|
ACPI_BERT_ERROR_RESERVED = 4 /* 4 and greater are reserved */
|
|
};
|
|
|
|
/*
|
|
* Note: The generic error data that follows the error_severity field above
|
|
* uses the struct acpi_hest_generic_data defined under the HEST table below
|
|
*/
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* CPEP - Corrected Platform Error Polling table (ACPI 4.0)
|
|
* Version 1
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct acpi_table_cpep {
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
u64 reserved;
|
|
};
|
|
|
|
/* Subtable */
|
|
|
|
struct acpi_cpep_polling {
|
|
struct acpi_subtable_header header;
|
|
u8 id; /* Processor ID */
|
|
u8 eid; /* Processor EID */
|
|
u32 interval; /* Polling interval (msec) */
|
|
};
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* ECDT - Embedded Controller Boot Resources Table
|
|
* Version 1
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct acpi_table_ecdt {
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
struct acpi_generic_address control; /* Address of EC command/status register */
|
|
struct acpi_generic_address data; /* Address of EC data register */
|
|
u32 uid; /* Unique ID - must be same as the EC _UID method */
|
|
u8 gpe; /* The GPE for the EC */
|
|
u8 id[1]; /* Full namepath of the EC in the ACPI namespace */
|
|
};
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* EINJ - Error Injection Table (ACPI 4.0)
|
|
* Version 1
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct acpi_table_einj {
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
u32 header_length;
|
|
u8 flags;
|
|
u8 reserved[3];
|
|
u32 entries;
|
|
};
|
|
|
|
/* EINJ Injection Instruction Entries (actions) */
|
|
|
|
struct acpi_einj_entry {
|
|
struct acpi_whea_header whea_header; /* Common header for WHEA tables */
|
|
};
|
|
|
|
/* Masks for Flags field above */
|
|
|
|
#define ACPI_EINJ_PRESERVE (1)
|
|
|
|
/* Values for Action field above */
|
|
|
|
enum acpi_einj_actions {
|
|
ACPI_EINJ_BEGIN_OPERATION = 0,
|
|
ACPI_EINJ_GET_TRIGGER_TABLE = 1,
|
|
ACPI_EINJ_SET_ERROR_TYPE = 2,
|
|
ACPI_EINJ_GET_ERROR_TYPE = 3,
|
|
ACPI_EINJ_END_OPERATION = 4,
|
|
ACPI_EINJ_EXECUTE_OPERATION = 5,
|
|
ACPI_EINJ_CHECK_BUSY_STATUS = 6,
|
|
ACPI_EINJ_GET_COMMAND_STATUS = 7,
|
|
ACPI_EINJ_SET_ERROR_TYPE_WITH_ADDRESS = 8,
|
|
ACPI_EINJ_GET_EXECUTE_TIMINGS = 9,
|
|
ACPI_EINJ_ACTION_RESERVED = 10, /* 10 and greater are reserved */
|
|
ACPI_EINJ_TRIGGER_ERROR = 0xFF /* Except for this value */
|
|
};
|
|
|
|
/* Values for Instruction field above */
|
|
|
|
enum acpi_einj_instructions {
|
|
ACPI_EINJ_READ_REGISTER = 0,
|
|
ACPI_EINJ_READ_REGISTER_VALUE = 1,
|
|
ACPI_EINJ_WRITE_REGISTER = 2,
|
|
ACPI_EINJ_WRITE_REGISTER_VALUE = 3,
|
|
ACPI_EINJ_NOOP = 4,
|
|
ACPI_EINJ_FLUSH_CACHELINE = 5,
|
|
ACPI_EINJ_INSTRUCTION_RESERVED = 6 /* 6 and greater are reserved */
|
|
};
|
|
|
|
struct acpi_einj_error_type_with_addr {
|
|
u32 error_type;
|
|
u32 vendor_struct_offset;
|
|
u32 flags;
|
|
u32 apic_id;
|
|
u64 address;
|
|
u64 range;
|
|
u32 pcie_id;
|
|
};
|
|
|
|
struct acpi_einj_vendor {
|
|
u32 length;
|
|
u32 pcie_id;
|
|
u16 vendor_id;
|
|
u16 device_id;
|
|
u8 revision_id;
|
|
u8 reserved[3];
|
|
};
|
|
|
|
/* EINJ Trigger Error Action Table */
|
|
|
|
struct acpi_einj_trigger {
|
|
u32 header_size;
|
|
u32 revision;
|
|
u32 table_size;
|
|
u32 entry_count;
|
|
};
|
|
|
|
/* Command status return values */
|
|
|
|
enum acpi_einj_command_status {
|
|
ACPI_EINJ_SUCCESS = 0,
|
|
ACPI_EINJ_FAILURE = 1,
|
|
ACPI_EINJ_INVALID_ACCESS = 2,
|
|
ACPI_EINJ_STATUS_RESERVED = 3 /* 3 and greater are reserved */
|
|
};
|
|
|
|
/* Error types returned from ACPI_EINJ_GET_ERROR_TYPE (bitfield) */
|
|
|
|
#define ACPI_EINJ_PROCESSOR_CORRECTABLE (1)
|
|
#define ACPI_EINJ_PROCESSOR_UNCORRECTABLE (1<<1)
|
|
#define ACPI_EINJ_PROCESSOR_FATAL (1<<2)
|
|
#define ACPI_EINJ_MEMORY_CORRECTABLE (1<<3)
|
|
#define ACPI_EINJ_MEMORY_UNCORRECTABLE (1<<4)
|
|
#define ACPI_EINJ_MEMORY_FATAL (1<<5)
|
|
#define ACPI_EINJ_PCIX_CORRECTABLE (1<<6)
|
|
#define ACPI_EINJ_PCIX_UNCORRECTABLE (1<<7)
|
|
#define ACPI_EINJ_PCIX_FATAL (1<<8)
|
|
#define ACPI_EINJ_PLATFORM_CORRECTABLE (1<<9)
|
|
#define ACPI_EINJ_PLATFORM_UNCORRECTABLE (1<<10)
|
|
#define ACPI_EINJ_PLATFORM_FATAL (1<<11)
|
|
#define ACPI_EINJ_VENDOR_DEFINED (1<<31)
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* ERST - Error Record Serialization Table (ACPI 4.0)
|
|
* Version 1
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct acpi_table_erst {
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
u32 header_length;
|
|
u32 reserved;
|
|
u32 entries;
|
|
};
|
|
|
|
/* ERST Serialization Entries (actions) */
|
|
|
|
struct acpi_erst_entry {
|
|
struct acpi_whea_header whea_header; /* Common header for WHEA tables */
|
|
};
|
|
|
|
/* Masks for Flags field above */
|
|
|
|
#define ACPI_ERST_PRESERVE (1)
|
|
|
|
/* Values for Action field above */
|
|
|
|
enum acpi_erst_actions {
|
|
ACPI_ERST_BEGIN_WRITE = 0,
|
|
ACPI_ERST_BEGIN_READ = 1,
|
|
ACPI_ERST_BEGIN_CLEAR = 2,
|
|
ACPI_ERST_END = 3,
|
|
ACPI_ERST_SET_RECORD_OFFSET = 4,
|
|
ACPI_ERST_EXECUTE_OPERATION = 5,
|
|
ACPI_ERST_CHECK_BUSY_STATUS = 6,
|
|
ACPI_ERST_GET_COMMAND_STATUS = 7,
|
|
ACPI_ERST_GET_RECORD_ID = 8,
|
|
ACPI_ERST_SET_RECORD_ID = 9,
|
|
ACPI_ERST_GET_RECORD_COUNT = 10,
|
|
ACPI_ERST_BEGIN_DUMMY_WRIITE = 11,
|
|
ACPI_ERST_NOT_USED = 12,
|
|
ACPI_ERST_GET_ERROR_RANGE = 13,
|
|
ACPI_ERST_GET_ERROR_LENGTH = 14,
|
|
ACPI_ERST_GET_ERROR_ATTRIBUTES = 15,
|
|
ACPI_ERST_EXECUTE_TIMINGS = 16,
|
|
ACPI_ERST_ACTION_RESERVED = 17 /* 17 and greater are reserved */
|
|
};
|
|
|
|
/* Values for Instruction field above */
|
|
|
|
enum acpi_erst_instructions {
|
|
ACPI_ERST_READ_REGISTER = 0,
|
|
ACPI_ERST_READ_REGISTER_VALUE = 1,
|
|
ACPI_ERST_WRITE_REGISTER = 2,
|
|
ACPI_ERST_WRITE_REGISTER_VALUE = 3,
|
|
ACPI_ERST_NOOP = 4,
|
|
ACPI_ERST_LOAD_VAR1 = 5,
|
|
ACPI_ERST_LOAD_VAR2 = 6,
|
|
ACPI_ERST_STORE_VAR1 = 7,
|
|
ACPI_ERST_ADD = 8,
|
|
ACPI_ERST_SUBTRACT = 9,
|
|
ACPI_ERST_ADD_VALUE = 10,
|
|
ACPI_ERST_SUBTRACT_VALUE = 11,
|
|
ACPI_ERST_STALL = 12,
|
|
ACPI_ERST_STALL_WHILE_TRUE = 13,
|
|
ACPI_ERST_SKIP_NEXT_IF_TRUE = 14,
|
|
ACPI_ERST_GOTO = 15,
|
|
ACPI_ERST_SET_SRC_ADDRESS_BASE = 16,
|
|
ACPI_ERST_SET_DST_ADDRESS_BASE = 17,
|
|
ACPI_ERST_MOVE_DATA = 18,
|
|
ACPI_ERST_INSTRUCTION_RESERVED = 19 /* 19 and greater are reserved */
|
|
};
|
|
|
|
/* Command status return values */
|
|
|
|
enum acpi_erst_command_status {
|
|
ACPI_ERST_SUCESS = 0,
|
|
ACPI_ERST_NO_SPACE = 1,
|
|
ACPI_ERST_NOT_AVAILABLE = 2,
|
|
ACPI_ERST_FAILURE = 3,
|
|
ACPI_ERST_RECORD_EMPTY = 4,
|
|
ACPI_ERST_NOT_FOUND = 5,
|
|
ACPI_ERST_STATUS_RESERVED = 6 /* 6 and greater are reserved */
|
|
};
|
|
|
|
/* Error Record Serialization Information */
|
|
|
|
struct acpi_erst_info {
|
|
u16 signature; /* Should be "ER" */
|
|
u8 data[48];
|
|
};
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* HEST - Hardware Error Source Table (ACPI 4.0)
|
|
* Version 1
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct acpi_table_hest {
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
u32 error_source_count;
|
|
};
|
|
|
|
/* HEST subtable header */
|
|
|
|
struct acpi_hest_header {
|
|
u16 type;
|
|
u16 source_id;
|
|
};
|
|
|
|
/* Values for Type field above for subtables */
|
|
|
|
enum acpi_hest_types {
|
|
ACPI_HEST_TYPE_IA32_CHECK = 0,
|
|
ACPI_HEST_TYPE_IA32_CORRECTED_CHECK = 1,
|
|
ACPI_HEST_TYPE_IA32_NMI = 2,
|
|
ACPI_HEST_TYPE_NOT_USED3 = 3,
|
|
ACPI_HEST_TYPE_NOT_USED4 = 4,
|
|
ACPI_HEST_TYPE_NOT_USED5 = 5,
|
|
ACPI_HEST_TYPE_AER_ROOT_PORT = 6,
|
|
ACPI_HEST_TYPE_AER_ENDPOINT = 7,
|
|
ACPI_HEST_TYPE_AER_BRIDGE = 8,
|
|
ACPI_HEST_TYPE_GENERIC_ERROR = 9,
|
|
ACPI_HEST_TYPE_GENERIC_ERROR_V2 = 10,
|
|
ACPI_HEST_TYPE_IA32_DEFERRED_CHECK = 11,
|
|
ACPI_HEST_TYPE_RESERVED = 12 /* 12 and greater are reserved */
|
|
};
|
|
|
|
/*
|
|
* HEST substructures contained in subtables
|
|
*/
|
|
|
|
/*
|
|
* IA32 Error Bank(s) - Follows the struct acpi_hest_ia_machine_check and
|
|
* struct acpi_hest_ia_corrected structures.
|
|
*/
|
|
struct acpi_hest_ia_error_bank {
|
|
u8 bank_number;
|
|
u8 clear_status_on_init;
|
|
u8 status_format;
|
|
u8 reserved;
|
|
u32 control_register;
|
|
u64 control_data;
|
|
u32 status_register;
|
|
u32 address_register;
|
|
u32 misc_register;
|
|
};
|
|
|
|
/* Common HEST sub-structure for PCI/AER structures below (6,7,8) */
|
|
|
|
struct acpi_hest_aer_common {
|
|
u16 reserved1;
|
|
u8 flags;
|
|
u8 enabled;
|
|
u32 records_to_preallocate;
|
|
u32 max_sections_per_record;
|
|
u32 bus; /* Bus and Segment numbers */
|
|
u16 device;
|
|
u16 function;
|
|
u16 device_control;
|
|
u16 reserved2;
|
|
u32 uncorrectable_mask;
|
|
u32 uncorrectable_severity;
|
|
u32 correctable_mask;
|
|
u32 advanced_capabilities;
|
|
};
|
|
|
|
/* Masks for HEST Flags fields */
|
|
|
|
#define ACPI_HEST_FIRMWARE_FIRST (1)
|
|
#define ACPI_HEST_GLOBAL (1<<1)
|
|
#define ACPI_HEST_GHES_ASSIST (1<<2)
|
|
|
|
/*
|
|
* Macros to access the bus/segment numbers in Bus field above:
|
|
* Bus number is encoded in bits 7:0
|
|
* Segment number is encoded in bits 23:8
|
|
*/
|
|
#define ACPI_HEST_BUS(bus) ((bus) & 0xFF)
|
|
#define ACPI_HEST_SEGMENT(bus) (((bus) >> 8) & 0xFFFF)
|
|
|
|
/* Hardware Error Notification */
|
|
|
|
struct acpi_hest_notify {
|
|
u8 type;
|
|
u8 length;
|
|
u16 config_write_enable;
|
|
u32 poll_interval;
|
|
u32 vector;
|
|
u32 polling_threshold_value;
|
|
u32 polling_threshold_window;
|
|
u32 error_threshold_value;
|
|
u32 error_threshold_window;
|
|
};
|
|
|
|
/* Values for Notify Type field above */
|
|
|
|
enum acpi_hest_notify_types {
|
|
ACPI_HEST_NOTIFY_POLLED = 0,
|
|
ACPI_HEST_NOTIFY_EXTERNAL = 1,
|
|
ACPI_HEST_NOTIFY_LOCAL = 2,
|
|
ACPI_HEST_NOTIFY_SCI = 3,
|
|
ACPI_HEST_NOTIFY_NMI = 4,
|
|
ACPI_HEST_NOTIFY_CMCI = 5, /* ACPI 5.0 */
|
|
ACPI_HEST_NOTIFY_MCE = 6, /* ACPI 5.0 */
|
|
ACPI_HEST_NOTIFY_GPIO = 7, /* ACPI 6.0 */
|
|
ACPI_HEST_NOTIFY_SEA = 8, /* ACPI 6.1 */
|
|
ACPI_HEST_NOTIFY_SEI = 9, /* ACPI 6.1 */
|
|
ACPI_HEST_NOTIFY_GSIV = 10, /* ACPI 6.1 */
|
|
ACPI_HEST_NOTIFY_SOFTWARE_DELEGATED = 11, /* ACPI 6.2 */
|
|
ACPI_HEST_NOTIFY_RESERVED = 12 /* 12 and greater are reserved */
|
|
};
|
|
|
|
/* Values for config_write_enable bitfield above */
|
|
|
|
#define ACPI_HEST_TYPE (1)
|
|
#define ACPI_HEST_POLL_INTERVAL (1<<1)
|
|
#define ACPI_HEST_POLL_THRESHOLD_VALUE (1<<2)
|
|
#define ACPI_HEST_POLL_THRESHOLD_WINDOW (1<<3)
|
|
#define ACPI_HEST_ERR_THRESHOLD_VALUE (1<<4)
|
|
#define ACPI_HEST_ERR_THRESHOLD_WINDOW (1<<5)
|
|
|
|
/*
|
|
* HEST subtables
|
|
*/
|
|
|
|
/* 0: IA32 Machine Check Exception */
|
|
|
|
struct acpi_hest_ia_machine_check {
|
|
struct acpi_hest_header header;
|
|
u16 reserved1;
|
|
u8 flags; /* See flags ACPI_HEST_GLOBAL, etc. above */
|
|
u8 enabled;
|
|
u32 records_to_preallocate;
|
|
u32 max_sections_per_record;
|
|
u64 global_capability_data;
|
|
u64 global_control_data;
|
|
u8 num_hardware_banks;
|
|
u8 reserved3[7];
|
|
};
|
|
|
|
/* 1: IA32 Corrected Machine Check */
|
|
|
|
struct acpi_hest_ia_corrected {
|
|
struct acpi_hest_header header;
|
|
u16 reserved1;
|
|
u8 flags; /* See flags ACPI_HEST_GLOBAL, etc. above */
|
|
u8 enabled;
|
|
u32 records_to_preallocate;
|
|
u32 max_sections_per_record;
|
|
struct acpi_hest_notify notify;
|
|
u8 num_hardware_banks;
|
|
u8 reserved2[3];
|
|
};
|
|
|
|
/* 2: IA32 Non-Maskable Interrupt */
|
|
|
|
struct acpi_hest_ia_nmi {
|
|
struct acpi_hest_header header;
|
|
u32 reserved;
|
|
u32 records_to_preallocate;
|
|
u32 max_sections_per_record;
|
|
u32 max_raw_data_length;
|
|
};
|
|
|
|
/* 3,4,5: Not used */
|
|
|
|
/* 6: PCI Express Root Port AER */
|
|
|
|
struct acpi_hest_aer_root {
|
|
struct acpi_hest_header header;
|
|
struct acpi_hest_aer_common aer;
|
|
u32 root_error_command;
|
|
};
|
|
|
|
/* 7: PCI Express AER (AER Endpoint) */
|
|
|
|
struct acpi_hest_aer {
|
|
struct acpi_hest_header header;
|
|
struct acpi_hest_aer_common aer;
|
|
};
|
|
|
|
/* 8: PCI Express/PCI-X Bridge AER */
|
|
|
|
struct acpi_hest_aer_bridge {
|
|
struct acpi_hest_header header;
|
|
struct acpi_hest_aer_common aer;
|
|
u32 uncorrectable_mask2;
|
|
u32 uncorrectable_severity2;
|
|
u32 advanced_capabilities2;
|
|
};
|
|
|
|
/* 9: Generic Hardware Error Source */
|
|
|
|
struct acpi_hest_generic {
|
|
struct acpi_hest_header header;
|
|
u16 related_source_id;
|
|
u8 reserved;
|
|
u8 enabled;
|
|
u32 records_to_preallocate;
|
|
u32 max_sections_per_record;
|
|
u32 max_raw_data_length;
|
|
struct acpi_generic_address error_status_address;
|
|
struct acpi_hest_notify notify;
|
|
u32 error_block_length;
|
|
};
|
|
|
|
/* 10: Generic Hardware Error Source, version 2 */
|
|
|
|
struct acpi_hest_generic_v2 {
|
|
struct acpi_hest_header header;
|
|
u16 related_source_id;
|
|
u8 reserved;
|
|
u8 enabled;
|
|
u32 records_to_preallocate;
|
|
u32 max_sections_per_record;
|
|
u32 max_raw_data_length;
|
|
struct acpi_generic_address error_status_address;
|
|
struct acpi_hest_notify notify;
|
|
u32 error_block_length;
|
|
struct acpi_generic_address read_ack_register;
|
|
u64 read_ack_preserve;
|
|
u64 read_ack_write;
|
|
};
|
|
|
|
/* Generic Error Status block */
|
|
|
|
struct acpi_hest_generic_status {
|
|
u32 block_status;
|
|
u32 raw_data_offset;
|
|
u32 raw_data_length;
|
|
u32 data_length;
|
|
u32 error_severity;
|
|
};
|
|
|
|
/* Values for block_status flags above */
|
|
|
|
#define ACPI_HEST_UNCORRECTABLE (1)
|
|
#define ACPI_HEST_CORRECTABLE (1<<1)
|
|
#define ACPI_HEST_MULTIPLE_UNCORRECTABLE (1<<2)
|
|
#define ACPI_HEST_MULTIPLE_CORRECTABLE (1<<3)
|
|
#define ACPI_HEST_ERROR_ENTRY_COUNT (0xFF<<4) /* 8 bits, error count */
|
|
|
|
/* Generic Error Data entry */
|
|
|
|
struct acpi_hest_generic_data {
|
|
u8 section_type[16];
|
|
u32 error_severity;
|
|
u16 revision;
|
|
u8 validation_bits;
|
|
u8 flags;
|
|
u32 error_data_length;
|
|
u8 fru_id[16];
|
|
u8 fru_text[20];
|
|
};
|
|
|
|
/* Extension for revision 0x0300 */
|
|
|
|
struct acpi_hest_generic_data_v300 {
|
|
u8 section_type[16];
|
|
u32 error_severity;
|
|
u16 revision;
|
|
u8 validation_bits;
|
|
u8 flags;
|
|
u32 error_data_length;
|
|
u8 fru_id[16];
|
|
u8 fru_text[20];
|
|
u64 time_stamp;
|
|
};
|
|
|
|
/* Values for error_severity above */
|
|
|
|
#define ACPI_HEST_GEN_ERROR_RECOVERABLE 0
|
|
#define ACPI_HEST_GEN_ERROR_FATAL 1
|
|
#define ACPI_HEST_GEN_ERROR_CORRECTED 2
|
|
#define ACPI_HEST_GEN_ERROR_NONE 3
|
|
|
|
/* Flags for validation_bits above */
|
|
|
|
#define ACPI_HEST_GEN_VALID_FRU_ID (1)
|
|
#define ACPI_HEST_GEN_VALID_FRU_STRING (1<<1)
|
|
#define ACPI_HEST_GEN_VALID_TIMESTAMP (1<<2)
|
|
|
|
/* 11: IA32 Deferred Machine Check Exception (ACPI 6.2) */
|
|
|
|
struct acpi_hest_ia_deferred_check {
|
|
struct acpi_hest_header header;
|
|
u16 reserved1;
|
|
u8 flags; /* See flags ACPI_HEST_GLOBAL, etc. above */
|
|
u8 enabled;
|
|
u32 records_to_preallocate;
|
|
u32 max_sections_per_record;
|
|
struct acpi_hest_notify notify;
|
|
u8 num_hardware_banks;
|
|
u8 reserved2[3];
|
|
};
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* HMAT - Heterogeneous Memory Attributes Table (ACPI 6.2)
|
|
* Version 1
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct acpi_table_hmat {
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
u32 reserved;
|
|
};
|
|
|
|
/* Values for HMAT structure types */
|
|
|
|
enum acpi_hmat_type {
|
|
ACPI_HMAT_TYPE_ADDRESS_RANGE = 0, /* Memory subystem address range */
|
|
ACPI_HMAT_TYPE_LOCALITY = 1, /* System locality latency and bandwidth information */
|
|
ACPI_HMAT_TYPE_CACHE = 2, /* Memory side cache information */
|
|
ACPI_HMAT_TYPE_RESERVED = 3 /* 3 and greater are reserved */
|
|
};
|
|
|
|
struct acpi_hmat_structure {
|
|
u16 type;
|
|
u16 reserved;
|
|
u32 length;
|
|
};
|
|
|
|
/*
|
|
* HMAT Structures, correspond to Type in struct acpi_hmat_structure
|
|
*/
|
|
|
|
/* 0: Memory subystem address range */
|
|
|
|
struct acpi_hmat_address_range {
|
|
struct acpi_hmat_structure header;
|
|
u16 flags;
|
|
u16 reserved1;
|
|
u32 processor_PD; /* Processor proximity domain */
|
|
u32 memory_PD; /* Memory proximity domain */
|
|
u32 reserved2;
|
|
u64 physical_address_base; /* Physical address range base */
|
|
u64 physical_address_length; /* Physical address range length */
|
|
};
|
|
|
|
/* Masks for Flags field above */
|
|
|
|
#define ACPI_HMAT_PROCESSOR_PD_VALID (1) /* 1: processor_PD field is valid */
|
|
#define ACPI_HMAT_MEMORY_PD_VALID (1<<1) /* 1: memory_PD field is valid */
|
|
#define ACPI_HMAT_RESERVATION_HINT (1<<2) /* 1: Reservation hint */
|
|
|
|
/* 1: System locality latency and bandwidth information */
|
|
|
|
struct acpi_hmat_locality {
|
|
struct acpi_hmat_structure header;
|
|
u8 flags;
|
|
u8 data_type;
|
|
u16 reserved1;
|
|
u32 number_of_initiator_Pds;
|
|
u32 number_of_target_Pds;
|
|
u32 reserved2;
|
|
u64 entry_base_unit;
|
|
};
|
|
|
|
/* Masks for Flags field above */
|
|
|
|
#define ACPI_HMAT_MEMORY_HIERARCHY (0x0F)
|
|
|
|
/* Values for Memory Hierarchy flag */
|
|
|
|
#define ACPI_HMAT_MEMORY 0
|
|
#define ACPI_HMAT_LAST_LEVEL_CACHE 1
|
|
#define ACPI_HMAT_1ST_LEVEL_CACHE 2
|
|
#define ACPI_HMAT_2ND_LEVEL_CACHE 3
|
|
#define ACPI_HMAT_3RD_LEVEL_CACHE 4
|
|
|
|
/* Values for data_type field above */
|
|
|
|
#define ACPI_HMAT_ACCESS_LATENCY 0
|
|
#define ACPI_HMAT_READ_LATENCY 1
|
|
#define ACPI_HMAT_WRITE_LATENCY 2
|
|
#define ACPI_HMAT_ACCESS_BANDWIDTH 3
|
|
#define ACPI_HMAT_READ_BANDWIDTH 4
|
|
#define ACPI_HMAT_WRITE_BANDWIDTH 5
|
|
|
|
/* 2: Memory side cache information */
|
|
|
|
struct acpi_hmat_cache {
|
|
struct acpi_hmat_structure header;
|
|
u32 memory_PD;
|
|
u32 reserved1;
|
|
u64 cache_size;
|
|
u32 cache_attributes;
|
|
u16 reserved2;
|
|
u16 number_of_SMBIOShandles;
|
|
};
|
|
|
|
/* Masks for cache_attributes field above */
|
|
|
|
#define ACPI_HMAT_TOTAL_CACHE_LEVEL (0x0000000F)
|
|
#define ACPI_HMAT_CACHE_LEVEL (0x000000F0)
|
|
#define ACPI_HMAT_CACHE_ASSOCIATIVITY (0x00000F00)
|
|
#define ACPI_HMAT_WRITE_POLICY (0x0000F000)
|
|
#define ACPI_HMAT_CACHE_LINE_SIZE (0xFFFF0000)
|
|
|
|
/* Values for cache associativity flag */
|
|
|
|
#define ACPI_HMAT_CA_NONE (0)
|
|
#define ACPI_HMAT_CA_DIRECT_MAPPED (1)
|
|
#define ACPI_HMAT_CA_COMPLEX_CACHE_INDEXING (2)
|
|
|
|
/* Values for write policy flag */
|
|
|
|
#define ACPI_HMAT_CP_NONE (0)
|
|
#define ACPI_HMAT_CP_WB (1)
|
|
#define ACPI_HMAT_CP_WT (2)
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* MADT - Multiple APIC Description Table
|
|
* Version 3
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct acpi_table_madt {
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
u32 address; /* Physical address of local APIC */
|
|
u32 flags;
|
|
};
|
|
|
|
/* Masks for Flags field above */
|
|
|
|
#define ACPI_MADT_PCAT_COMPAT (1) /* 00: System also has dual 8259s */
|
|
|
|
/* Values for PCATCompat flag */
|
|
|
|
#define ACPI_MADT_DUAL_PIC 1
|
|
#define ACPI_MADT_MULTIPLE_APIC 0
|
|
|
|
/* Values for MADT subtable type in struct acpi_subtable_header */
|
|
|
|
enum acpi_madt_type {
|
|
ACPI_MADT_TYPE_LOCAL_APIC = 0,
|
|
ACPI_MADT_TYPE_IO_APIC = 1,
|
|
ACPI_MADT_TYPE_INTERRUPT_OVERRIDE = 2,
|
|
ACPI_MADT_TYPE_NMI_SOURCE = 3,
|
|
ACPI_MADT_TYPE_LOCAL_APIC_NMI = 4,
|
|
ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE = 5,
|
|
ACPI_MADT_TYPE_IO_SAPIC = 6,
|
|
ACPI_MADT_TYPE_LOCAL_SAPIC = 7,
|
|
ACPI_MADT_TYPE_INTERRUPT_SOURCE = 8,
|
|
ACPI_MADT_TYPE_LOCAL_X2APIC = 9,
|
|
ACPI_MADT_TYPE_LOCAL_X2APIC_NMI = 10,
|
|
ACPI_MADT_TYPE_GENERIC_INTERRUPT = 11,
|
|
ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR = 12,
|
|
ACPI_MADT_TYPE_GENERIC_MSI_FRAME = 13,
|
|
ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR = 14,
|
|
ACPI_MADT_TYPE_GENERIC_TRANSLATOR = 15,
|
|
ACPI_MADT_TYPE_RESERVED = 16 /* 16 and greater are reserved */
|
|
};
|
|
|
|
/*
|
|
* MADT Subtables, correspond to Type in struct acpi_subtable_header
|
|
*/
|
|
|
|
/* 0: Processor Local APIC */
|
|
|
|
struct acpi_madt_local_apic {
|
|
struct acpi_subtable_header header;
|
|
u8 processor_id; /* ACPI processor id */
|
|
u8 id; /* Processor's local APIC id */
|
|
u32 lapic_flags;
|
|
};
|
|
|
|
/* 1: IO APIC */
|
|
|
|
struct acpi_madt_io_apic {
|
|
struct acpi_subtable_header header;
|
|
u8 id; /* I/O APIC ID */
|
|
u8 reserved; /* reserved - must be zero */
|
|
u32 address; /* APIC physical address */
|
|
u32 global_irq_base; /* Global system interrupt where INTI lines start */
|
|
};
|
|
|
|
/* 2: Interrupt Override */
|
|
|
|
struct acpi_madt_interrupt_override {
|
|
struct acpi_subtable_header header;
|
|
u8 bus; /* 0 - ISA */
|
|
u8 source_irq; /* Interrupt source (IRQ) */
|
|
u32 global_irq; /* Global system interrupt */
|
|
u16 inti_flags;
|
|
};
|
|
|
|
/* 3: NMI Source */
|
|
|
|
struct acpi_madt_nmi_source {
|
|
struct acpi_subtable_header header;
|
|
u16 inti_flags;
|
|
u32 global_irq; /* Global system interrupt */
|
|
};
|
|
|
|
/* 4: Local APIC NMI */
|
|
|
|
struct acpi_madt_local_apic_nmi {
|
|
struct acpi_subtable_header header;
|
|
u8 processor_id; /* ACPI processor id */
|
|
u16 inti_flags;
|
|
u8 lint; /* LINTn to which NMI is connected */
|
|
};
|
|
|
|
/* 5: Address Override */
|
|
|
|
struct acpi_madt_local_apic_override {
|
|
struct acpi_subtable_header header;
|
|
u16 reserved; /* Reserved, must be zero */
|
|
u64 address; /* APIC physical address */
|
|
};
|
|
|
|
/* 6: I/O Sapic */
|
|
|
|
struct acpi_madt_io_sapic {
|
|
struct acpi_subtable_header header;
|
|
u8 id; /* I/O SAPIC ID */
|
|
u8 reserved; /* Reserved, must be zero */
|
|
u32 global_irq_base; /* Global interrupt for SAPIC start */
|
|
u64 address; /* SAPIC physical address */
|
|
};
|
|
|
|
/* 7: Local Sapic */
|
|
|
|
struct acpi_madt_local_sapic {
|
|
struct acpi_subtable_header header;
|
|
u8 processor_id; /* ACPI processor id */
|
|
u8 id; /* SAPIC ID */
|
|
u8 eid; /* SAPIC EID */
|
|
u8 reserved[3]; /* Reserved, must be zero */
|
|
u32 lapic_flags;
|
|
u32 uid; /* Numeric UID - ACPI 3.0 */
|
|
char uid_string[1]; /* String UID - ACPI 3.0 */
|
|
};
|
|
|
|
/* 8: Platform Interrupt Source */
|
|
|
|
struct acpi_madt_interrupt_source {
|
|
struct acpi_subtable_header header;
|
|
u16 inti_flags;
|
|
u8 type; /* 1=PMI, 2=INIT, 3=corrected */
|
|
u8 id; /* Processor ID */
|
|
u8 eid; /* Processor EID */
|
|
u8 io_sapic_vector; /* Vector value for PMI interrupts */
|
|
u32 global_irq; /* Global system interrupt */
|
|
u32 flags; /* Interrupt Source Flags */
|
|
};
|
|
|
|
/* Masks for Flags field above */
|
|
|
|
#define ACPI_MADT_CPEI_OVERRIDE (1)
|
|
|
|
/* 9: Processor Local X2APIC (ACPI 4.0) */
|
|
|
|
struct acpi_madt_local_x2apic {
|
|
struct acpi_subtable_header header;
|
|
u16 reserved; /* reserved - must be zero */
|
|
u32 local_apic_id; /* Processor x2APIC ID */
|
|
u32 lapic_flags;
|
|
u32 uid; /* ACPI processor UID */
|
|
};
|
|
|
|
/* 10: Local X2APIC NMI (ACPI 4.0) */
|
|
|
|
struct acpi_madt_local_x2apic_nmi {
|
|
struct acpi_subtable_header header;
|
|
u16 inti_flags;
|
|
u32 uid; /* ACPI processor UID */
|
|
u8 lint; /* LINTn to which NMI is connected */
|
|
u8 reserved[3]; /* reserved - must be zero */
|
|
};
|
|
|
|
/* 11: Generic Interrupt (ACPI 5.0 + ACPI 6.0 changes) */
|
|
|
|
struct acpi_madt_generic_interrupt {
|
|
struct acpi_subtable_header header;
|
|
u16 reserved; /* reserved - must be zero */
|
|
u32 cpu_interface_number;
|
|
u32 uid;
|
|
u32 flags;
|
|
u32 parking_version;
|
|
u32 performance_interrupt;
|
|
u64 parked_address;
|
|
u64 base_address;
|
|
u64 gicv_base_address;
|
|
u64 gich_base_address;
|
|
u32 vgic_interrupt;
|
|
u64 gicr_base_address;
|
|
u64 arm_mpidr;
|
|
u8 efficiency_class;
|
|
u8 reserved2[3];
|
|
};
|
|
|
|
/* Masks for Flags field above */
|
|
|
|
/* ACPI_MADT_ENABLED (1) Processor is usable if set */
|
|
#define ACPI_MADT_PERFORMANCE_IRQ_MODE (1<<1) /* 01: Performance Interrupt Mode */
|
|
#define ACPI_MADT_VGIC_IRQ_MODE (1<<2) /* 02: VGIC Maintenance Interrupt mode */
|
|
|
|
/* 12: Generic Distributor (ACPI 5.0 + ACPI 6.0 changes) */
|
|
|
|
struct acpi_madt_generic_distributor {
|
|
struct acpi_subtable_header header;
|
|
u16 reserved; /* reserved - must be zero */
|
|
u32 gic_id;
|
|
u64 base_address;
|
|
u32 global_irq_base;
|
|
u8 version;
|
|
u8 reserved2[3]; /* reserved - must be zero */
|
|
};
|
|
|
|
/* Values for Version field above */
|
|
|
|
enum acpi_madt_gic_version {
|
|
ACPI_MADT_GIC_VERSION_NONE = 0,
|
|
ACPI_MADT_GIC_VERSION_V1 = 1,
|
|
ACPI_MADT_GIC_VERSION_V2 = 2,
|
|
ACPI_MADT_GIC_VERSION_V3 = 3,
|
|
ACPI_MADT_GIC_VERSION_V4 = 4,
|
|
ACPI_MADT_GIC_VERSION_RESERVED = 5 /* 5 and greater are reserved */
|
|
};
|
|
|
|
/* 13: Generic MSI Frame (ACPI 5.1) */
|
|
|
|
struct acpi_madt_generic_msi_frame {
|
|
struct acpi_subtable_header header;
|
|
u16 reserved; /* reserved - must be zero */
|
|
u32 msi_frame_id;
|
|
u64 base_address;
|
|
u32 flags;
|
|
u16 spi_count;
|
|
u16 spi_base;
|
|
};
|
|
|
|
/* Masks for Flags field above */
|
|
|
|
#define ACPI_MADT_OVERRIDE_SPI_VALUES (1)
|
|
|
|
/* 14: Generic Redistributor (ACPI 5.1) */
|
|
|
|
struct acpi_madt_generic_redistributor {
|
|
struct acpi_subtable_header header;
|
|
u16 reserved; /* reserved - must be zero */
|
|
u64 base_address;
|
|
u32 length;
|
|
};
|
|
|
|
/* 15: Generic Translator (ACPI 6.0) */
|
|
|
|
struct acpi_madt_generic_translator {
|
|
struct acpi_subtable_header header;
|
|
u16 reserved; /* reserved - must be zero */
|
|
u32 translation_id;
|
|
u64 base_address;
|
|
u32 reserved2;
|
|
};
|
|
|
|
/*
|
|
* Common flags fields for MADT subtables
|
|
*/
|
|
|
|
/* MADT Local APIC flags */
|
|
|
|
#define ACPI_MADT_ENABLED (1) /* 00: Processor is usable if set */
|
|
|
|
/* MADT MPS INTI flags (inti_flags) */
|
|
|
|
#define ACPI_MADT_POLARITY_MASK (3) /* 00-01: Polarity of APIC I/O input signals */
|
|
#define ACPI_MADT_TRIGGER_MASK (3<<2) /* 02-03: Trigger mode of APIC input signals */
|
|
|
|
/* Values for MPS INTI flags */
|
|
|
|
#define ACPI_MADT_POLARITY_CONFORMS 0
|
|
#define ACPI_MADT_POLARITY_ACTIVE_HIGH 1
|
|
#define ACPI_MADT_POLARITY_RESERVED 2
|
|
#define ACPI_MADT_POLARITY_ACTIVE_LOW 3
|
|
|
|
#define ACPI_MADT_TRIGGER_CONFORMS (0)
|
|
#define ACPI_MADT_TRIGGER_EDGE (1<<2)
|
|
#define ACPI_MADT_TRIGGER_RESERVED (2<<2)
|
|
#define ACPI_MADT_TRIGGER_LEVEL (3<<2)
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* MSCT - Maximum System Characteristics Table (ACPI 4.0)
|
|
* Version 1
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct acpi_table_msct {
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
u32 proximity_offset; /* Location of proximity info struct(s) */
|
|
u32 max_proximity_domains; /* Max number of proximity domains */
|
|
u32 max_clock_domains; /* Max number of clock domains */
|
|
u64 max_address; /* Max physical address in system */
|
|
};
|
|
|
|
/* subtable - Maximum Proximity Domain Information. Version 1 */
|
|
|
|
struct acpi_msct_proximity {
|
|
u8 revision;
|
|
u8 length;
|
|
u32 range_start; /* Start of domain range */
|
|
u32 range_end; /* End of domain range */
|
|
u32 processor_capacity;
|
|
u64 memory_capacity; /* In bytes */
|
|
};
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* NFIT - NVDIMM Interface Table (ACPI 6.0+)
|
|
* Version 1
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct acpi_table_nfit {
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
u32 reserved; /* Reserved, must be zero */
|
|
};
|
|
|
|
/* Subtable header for NFIT */
|
|
|
|
struct acpi_nfit_header {
|
|
u16 type;
|
|
u16 length;
|
|
};
|
|
|
|
/* Values for subtable type in struct acpi_nfit_header */
|
|
|
|
enum acpi_nfit_type {
|
|
ACPI_NFIT_TYPE_SYSTEM_ADDRESS = 0,
|
|
ACPI_NFIT_TYPE_MEMORY_MAP = 1,
|
|
ACPI_NFIT_TYPE_INTERLEAVE = 2,
|
|
ACPI_NFIT_TYPE_SMBIOS = 3,
|
|
ACPI_NFIT_TYPE_CONTROL_REGION = 4,
|
|
ACPI_NFIT_TYPE_DATA_REGION = 5,
|
|
ACPI_NFIT_TYPE_FLUSH_ADDRESS = 6,
|
|
ACPI_NFIT_TYPE_CAPABILITIES = 7,
|
|
ACPI_NFIT_TYPE_RESERVED = 8 /* 8 and greater are reserved */
|
|
};
|
|
|
|
/*
|
|
* NFIT Subtables
|
|
*/
|
|
|
|
/* 0: System Physical Address Range Structure */
|
|
|
|
struct acpi_nfit_system_address {
|
|
struct acpi_nfit_header header;
|
|
u16 range_index;
|
|
u16 flags;
|
|
u32 reserved; /* Reserved, must be zero */
|
|
u32 proximity_domain;
|
|
u8 range_guid[16];
|
|
u64 address;
|
|
u64 length;
|
|
u64 memory_mapping;
|
|
};
|
|
|
|
/* Flags */
|
|
|
|
#define ACPI_NFIT_ADD_ONLINE_ONLY (1) /* 00: Add/Online Operation Only */
|
|
#define ACPI_NFIT_PROXIMITY_VALID (1<<1) /* 01: Proximity Domain Valid */
|
|
|
|
/* Range Type GUIDs appear in the include/acuuid.h file */
|
|
|
|
/* 1: Memory Device to System Address Range Map Structure */
|
|
|
|
struct acpi_nfit_memory_map {
|
|
struct acpi_nfit_header header;
|
|
u32 device_handle;
|
|
u16 physical_id;
|
|
u16 region_id;
|
|
u16 range_index;
|
|
u16 region_index;
|
|
u64 region_size;
|
|
u64 region_offset;
|
|
u64 address;
|
|
u16 interleave_index;
|
|
u16 interleave_ways;
|
|
u16 flags;
|
|
u16 reserved; /* Reserved, must be zero */
|
|
};
|
|
|
|
/* Flags */
|
|
|
|
#define ACPI_NFIT_MEM_SAVE_FAILED (1) /* 00: Last SAVE to Memory Device failed */
|
|
#define ACPI_NFIT_MEM_RESTORE_FAILED (1<<1) /* 01: Last RESTORE from Memory Device failed */
|
|
#define ACPI_NFIT_MEM_FLUSH_FAILED (1<<2) /* 02: Platform flush failed */
|
|
#define ACPI_NFIT_MEM_NOT_ARMED (1<<3) /* 03: Memory Device is not armed */
|
|
#define ACPI_NFIT_MEM_HEALTH_OBSERVED (1<<4) /* 04: Memory Device observed SMART/health events */
|
|
#define ACPI_NFIT_MEM_HEALTH_ENABLED (1<<5) /* 05: SMART/health events enabled */
|
|
#define ACPI_NFIT_MEM_MAP_FAILED (1<<6) /* 06: Mapping to SPA failed */
|
|
|
|
/* 2: Interleave Structure */
|
|
|
|
struct acpi_nfit_interleave {
|
|
struct acpi_nfit_header header;
|
|
u16 interleave_index;
|
|
u16 reserved; /* Reserved, must be zero */
|
|
u32 line_count;
|
|
u32 line_size;
|
|
u32 line_offset[1]; /* Variable length */
|
|
};
|
|
|
|
/* 3: SMBIOS Management Information Structure */
|
|
|
|
struct acpi_nfit_smbios {
|
|
struct acpi_nfit_header header;
|
|
u32 reserved; /* Reserved, must be zero */
|
|
u8 data[1]; /* Variable length */
|
|
};
|
|
|
|
/* 4: NVDIMM Control Region Structure */
|
|
|
|
struct acpi_nfit_control_region {
|
|
struct acpi_nfit_header header;
|
|
u16 region_index;
|
|
u16 vendor_id;
|
|
u16 device_id;
|
|
u16 revision_id;
|
|
u16 subsystem_vendor_id;
|
|
u16 subsystem_device_id;
|
|
u16 subsystem_revision_id;
|
|
u8 valid_fields;
|
|
u8 manufacturing_location;
|
|
u16 manufacturing_date;
|
|
u8 reserved[2]; /* Reserved, must be zero */
|
|
u32 serial_number;
|
|
u16 code;
|
|
u16 windows;
|
|
u64 window_size;
|
|
u64 command_offset;
|
|
u64 command_size;
|
|
u64 status_offset;
|
|
u64 status_size;
|
|
u16 flags;
|
|
u8 reserved1[6]; /* Reserved, must be zero */
|
|
};
|
|
|
|
/* Flags */
|
|
|
|
#define ACPI_NFIT_CONTROL_BUFFERED (1) /* Block Data Windows implementation is buffered */
|
|
|
|
/* valid_fields bits */
|
|
|
|
#define ACPI_NFIT_CONTROL_MFG_INFO_VALID (1) /* Manufacturing fields are valid */
|
|
|
|
/* 5: NVDIMM Block Data Window Region Structure */
|
|
|
|
struct acpi_nfit_data_region {
|
|
struct acpi_nfit_header header;
|
|
u16 region_index;
|
|
u16 windows;
|
|
u64 offset;
|
|
u64 size;
|
|
u64 capacity;
|
|
u64 start_address;
|
|
};
|
|
|
|
/* 6: Flush Hint Address Structure */
|
|
|
|
struct acpi_nfit_flush_address {
|
|
struct acpi_nfit_header header;
|
|
u32 device_handle;
|
|
u16 hint_count;
|
|
u8 reserved[6]; /* Reserved, must be zero */
|
|
u64 hint_address[1]; /* Variable length */
|
|
};
|
|
|
|
/* 7: Platform Capabilities Structure */
|
|
|
|
struct acpi_nfit_capabilities {
|
|
struct acpi_nfit_header header;
|
|
u8 highest_capability;
|
|
u8 reserved[3]; /* Reserved, must be zero */
|
|
u32 capabilities;
|
|
u32 reserved2;
|
|
};
|
|
|
|
/* Capabilities Flags */
|
|
|
|
#define ACPI_NFIT_CAPABILITY_CACHE_FLUSH (1) /* 00: Cache Flush to NVDIMM capable */
|
|
#define ACPI_NFIT_CAPABILITY_MEM_FLUSH (1<<1) /* 01: Memory Flush to NVDIMM capable */
|
|
#define ACPI_NFIT_CAPABILITY_MEM_MIRRORING (1<<2) /* 02: Memory Mirroring capable */
|
|
|
|
/*
|
|
* NFIT/DVDIMM device handle support - used as the _ADR for each NVDIMM
|
|
*/
|
|
struct nfit_device_handle {
|
|
u32 handle;
|
|
};
|
|
|
|
/* Device handle construction and extraction macros */
|
|
|
|
#define ACPI_NFIT_DIMM_NUMBER_MASK 0x0000000F
|
|
#define ACPI_NFIT_CHANNEL_NUMBER_MASK 0x000000F0
|
|
#define ACPI_NFIT_MEMORY_ID_MASK 0x00000F00
|
|
#define ACPI_NFIT_SOCKET_ID_MASK 0x0000F000
|
|
#define ACPI_NFIT_NODE_ID_MASK 0x0FFF0000
|
|
|
|
#define ACPI_NFIT_DIMM_NUMBER_OFFSET 0
|
|
#define ACPI_NFIT_CHANNEL_NUMBER_OFFSET 4
|
|
#define ACPI_NFIT_MEMORY_ID_OFFSET 8
|
|
#define ACPI_NFIT_SOCKET_ID_OFFSET 12
|
|
#define ACPI_NFIT_NODE_ID_OFFSET 16
|
|
|
|
/* Macro to construct a NFIT/NVDIMM device handle */
|
|
|
|
#define ACPI_NFIT_BUILD_DEVICE_HANDLE(dimm, channel, memory, socket, node) \
|
|
((dimm) | \
|
|
((channel) << ACPI_NFIT_CHANNEL_NUMBER_OFFSET) | \
|
|
((memory) << ACPI_NFIT_MEMORY_ID_OFFSET) | \
|
|
((socket) << ACPI_NFIT_SOCKET_ID_OFFSET) | \
|
|
((node) << ACPI_NFIT_NODE_ID_OFFSET))
|
|
|
|
/* Macros to extract individual fields from a NFIT/NVDIMM device handle */
|
|
|
|
#define ACPI_NFIT_GET_DIMM_NUMBER(handle) \
|
|
((handle) & ACPI_NFIT_DIMM_NUMBER_MASK)
|
|
|
|
#define ACPI_NFIT_GET_CHANNEL_NUMBER(handle) \
|
|
(((handle) & ACPI_NFIT_CHANNEL_NUMBER_MASK) >> ACPI_NFIT_CHANNEL_NUMBER_OFFSET)
|
|
|
|
#define ACPI_NFIT_GET_MEMORY_ID(handle) \
|
|
(((handle) & ACPI_NFIT_MEMORY_ID_MASK) >> ACPI_NFIT_MEMORY_ID_OFFSET)
|
|
|
|
#define ACPI_NFIT_GET_SOCKET_ID(handle) \
|
|
(((handle) & ACPI_NFIT_SOCKET_ID_MASK) >> ACPI_NFIT_SOCKET_ID_OFFSET)
|
|
|
|
#define ACPI_NFIT_GET_NODE_ID(handle) \
|
|
(((handle) & ACPI_NFIT_NODE_ID_MASK) >> ACPI_NFIT_NODE_ID_OFFSET)
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* PDTT - Platform Debug Trigger Table (ACPI 6.2)
|
|
* Version 0
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct acpi_table_pdtt {
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
u8 trigger_count;
|
|
u8 reserved[3];
|
|
u32 array_offset;
|
|
};
|
|
|
|
/*
|
|
* PDTT Communication Channel Identifier Structure.
|
|
* The number of these structures is defined by trigger_count above,
|
|
* starting at array_offset.
|
|
*/
|
|
struct acpi_pdtt_channel {
|
|
u8 subchannel_id;
|
|
u8 flags;
|
|
};
|
|
|
|
/* Flags for above */
|
|
|
|
#define ACPI_PDTT_RUNTIME_TRIGGER (1)
|
|
#define ACPI_PDTT_WAIT_COMPLETION (1<<1)
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* PPTT - Processor Properties Topology Table (ACPI 6.2)
|
|
* Version 1
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct acpi_table_pptt {
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
};
|
|
|
|
/* Values for Type field above */
|
|
|
|
enum acpi_pptt_type {
|
|
ACPI_PPTT_TYPE_PROCESSOR = 0,
|
|
ACPI_PPTT_TYPE_CACHE = 1,
|
|
ACPI_PPTT_TYPE_ID = 2,
|
|
ACPI_PPTT_TYPE_RESERVED = 3
|
|
};
|
|
|
|
/* 0: Processor Hierarchy Node Structure */
|
|
|
|
struct acpi_pptt_processor {
|
|
struct acpi_subtable_header header;
|
|
u16 reserved;
|
|
u32 flags;
|
|
u32 parent;
|
|
u32 acpi_processor_id;
|
|
u32 number_of_priv_resources;
|
|
};
|
|
|
|
/* Flags */
|
|
|
|
#define ACPI_PPTT_PHYSICAL_PACKAGE (1) /* Physical package */
|
|
#define ACPI_PPTT_ACPI_PROCESSOR_ID_VALID (2) /* ACPI Processor ID valid */
|
|
|
|
/* 1: Cache Type Structure */
|
|
|
|
struct acpi_pptt_cache {
|
|
struct acpi_subtable_header header;
|
|
u16 reserved;
|
|
u32 flags;
|
|
u32 next_level_of_cache;
|
|
u32 size;
|
|
u32 number_of_sets;
|
|
u8 associativity;
|
|
u8 attributes;
|
|
u16 line_size;
|
|
};
|
|
|
|
/* Flags */
|
|
|
|
#define ACPI_PPTT_SIZE_PROPERTY_VALID (1) /* Physical property valid */
|
|
#define ACPI_PPTT_NUMBER_OF_SETS_VALID (1<<1) /* Number of sets valid */
|
|
#define ACPI_PPTT_ASSOCIATIVITY_VALID (1<<2) /* Associativity valid */
|
|
#define ACPI_PPTT_ALLOCATION_TYPE_VALID (1<<3) /* Allocation type valid */
|
|
#define ACPI_PPTT_CACHE_TYPE_VALID (1<<4) /* Cache type valid */
|
|
#define ACPI_PPTT_WRITE_POLICY_VALID (1<<5) /* Write policy valid */
|
|
#define ACPI_PPTT_LINE_SIZE_VALID (1<<6) /* Line size valid */
|
|
|
|
/* Masks for Attributes */
|
|
|
|
#define ACPI_PPTT_MASK_ALLOCATION_TYPE (0x03) /* Allocation type */
|
|
#define ACPI_PPTT_MASK_CACHE_TYPE (0x0C) /* Cache type */
|
|
#define ACPI_PPTT_MASK_WRITE_POLICY (0x10) /* Write policy */
|
|
|
|
/* Attributes describing cache */
|
|
#define ACPI_PPTT_CACHE_READ_ALLOCATE (0x0) /* Cache line is allocated on read */
|
|
#define ACPI_PPTT_CACHE_WRITE_ALLOCATE (0x01) /* Cache line is allocated on write */
|
|
#define ACPI_PPTT_CACHE_RW_ALLOCATE (0x02) /* Cache line is allocated on read and write */
|
|
#define ACPI_PPTT_CACHE_RW_ALLOCATE_ALT (0x03) /* Alternate representation of above */
|
|
|
|
#define ACPI_PPTT_CACHE_TYPE_DATA (0x0) /* Data cache */
|
|
#define ACPI_PPTT_CACHE_TYPE_INSTR (1<<2) /* Instruction cache */
|
|
#define ACPI_PPTT_CACHE_TYPE_UNIFIED (2<<2) /* Unified I & D cache */
|
|
#define ACPI_PPTT_CACHE_TYPE_UNIFIED_ALT (3<<2) /* Alternate representation of above */
|
|
|
|
#define ACPI_PPTT_CACHE_POLICY_WB (0x0) /* Cache is write back */
|
|
#define ACPI_PPTT_CACHE_POLICY_WT (1<<4) /* Cache is write through */
|
|
|
|
/* 2: ID Structure */
|
|
|
|
struct acpi_pptt_id {
|
|
struct acpi_subtable_header header;
|
|
u16 reserved;
|
|
u32 vendor_id;
|
|
u64 level1_id;
|
|
u64 level2_id;
|
|
u16 major_rev;
|
|
u16 minor_rev;
|
|
u16 spin_rev;
|
|
};
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* SBST - Smart Battery Specification Table
|
|
* Version 1
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct acpi_table_sbst {
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
u32 warning_level;
|
|
u32 low_level;
|
|
u32 critical_level;
|
|
};
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* SDEV - Secure Devices Table (ACPI 6.2)
|
|
* Version 1
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct acpi_table_sdev {
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
};
|
|
|
|
struct acpi_sdev_header {
|
|
u8 type;
|
|
u8 flags;
|
|
u16 length;
|
|
};
|
|
|
|
/* Values for subtable type above */
|
|
|
|
enum acpi_sdev_type {
|
|
ACPI_SDEV_TYPE_NAMESPACE_DEVICE = 0,
|
|
ACPI_SDEV_TYPE_PCIE_ENDPOINT_DEVICE = 1,
|
|
ACPI_SDEV_TYPE_RESERVED = 2 /* 2 and greater are reserved */
|
|
};
|
|
|
|
/* Values for flags above */
|
|
|
|
#define ACPI_SDEV_HANDOFF_TO_UNSECURE_OS (1)
|
|
|
|
/*
|
|
* SDEV subtables
|
|
*/
|
|
|
|
/* 0: Namespace Device Based Secure Device Structure */
|
|
|
|
struct acpi_sdev_namespace {
|
|
struct acpi_sdev_header header;
|
|
u16 device_id_offset;
|
|
u16 device_id_length;
|
|
u16 vendor_data_offset;
|
|
u16 vendor_data_length;
|
|
};
|
|
|
|
/* 1: PCIe Endpoint Device Based Device Structure */
|
|
|
|
struct acpi_sdev_pcie {
|
|
struct acpi_sdev_header header;
|
|
u16 segment;
|
|
u16 start_bus;
|
|
u16 path_offset;
|
|
u16 path_length;
|
|
u16 vendor_data_offset;
|
|
u16 vendor_data_length;
|
|
};
|
|
|
|
/* 1a: PCIe Endpoint path entry */
|
|
|
|
struct acpi_sdev_pcie_path {
|
|
u8 device;
|
|
u8 function;
|
|
};
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* SLIT - System Locality Distance Information Table
|
|
* Version 1
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct acpi_table_slit {
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
u64 locality_count;
|
|
u8 entry[1]; /* Real size = localities^2 */
|
|
};
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* SRAT - System Resource Affinity Table
|
|
* Version 3
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct acpi_table_srat {
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
u32 table_revision; /* Must be value '1' */
|
|
u64 reserved; /* Reserved, must be zero */
|
|
};
|
|
|
|
/* Values for subtable type in struct acpi_subtable_header */
|
|
|
|
enum acpi_srat_type {
|
|
ACPI_SRAT_TYPE_CPU_AFFINITY = 0,
|
|
ACPI_SRAT_TYPE_MEMORY_AFFINITY = 1,
|
|
ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY = 2,
|
|
ACPI_SRAT_TYPE_GICC_AFFINITY = 3,
|
|
ACPI_SRAT_TYPE_GIC_ITS_AFFINITY = 4, /* ACPI 6.2 */
|
|
ACPI_SRAT_TYPE_RESERVED = 5 /* 5 and greater are reserved */
|
|
};
|
|
|
|
/*
|
|
* SRAT Subtables, correspond to Type in struct acpi_subtable_header
|
|
*/
|
|
|
|
/* 0: Processor Local APIC/SAPIC Affinity */
|
|
|
|
struct acpi_srat_cpu_affinity {
|
|
struct acpi_subtable_header header;
|
|
u8 proximity_domain_lo;
|
|
u8 apic_id;
|
|
u32 flags;
|
|
u8 local_sapic_eid;
|
|
u8 proximity_domain_hi[3];
|
|
u32 clock_domain;
|
|
};
|
|
|
|
/* Flags */
|
|
|
|
#define ACPI_SRAT_CPU_USE_AFFINITY (1) /* 00: Use affinity structure */
|
|
|
|
/* 1: Memory Affinity */
|
|
|
|
struct acpi_srat_mem_affinity {
|
|
struct acpi_subtable_header header;
|
|
u32 proximity_domain;
|
|
u16 reserved; /* Reserved, must be zero */
|
|
u64 base_address;
|
|
u64 length;
|
|
u32 reserved1;
|
|
u32 flags;
|
|
u64 reserved2; /* Reserved, must be zero */
|
|
};
|
|
|
|
/* Flags */
|
|
|
|
#define ACPI_SRAT_MEM_ENABLED (1) /* 00: Use affinity structure */
|
|
#define ACPI_SRAT_MEM_HOT_PLUGGABLE (1<<1) /* 01: Memory region is hot pluggable */
|
|
#define ACPI_SRAT_MEM_NON_VOLATILE (1<<2) /* 02: Memory region is non-volatile */
|
|
|
|
/* 2: Processor Local X2_APIC Affinity (ACPI 4.0) */
|
|
|
|
struct acpi_srat_x2apic_cpu_affinity {
|
|
struct acpi_subtable_header header;
|
|
u16 reserved; /* Reserved, must be zero */
|
|
u32 proximity_domain;
|
|
u32 apic_id;
|
|
u32 flags;
|
|
u32 clock_domain;
|
|
u32 reserved2;
|
|
};
|
|
|
|
/* Flags for struct acpi_srat_cpu_affinity and struct acpi_srat_x2apic_cpu_affinity */
|
|
|
|
#define ACPI_SRAT_CPU_ENABLED (1) /* 00: Use affinity structure */
|
|
|
|
/* 3: GICC Affinity (ACPI 5.1) */
|
|
|
|
struct acpi_srat_gicc_affinity {
|
|
struct acpi_subtable_header header;
|
|
u32 proximity_domain;
|
|
u32 acpi_processor_uid;
|
|
u32 flags;
|
|
u32 clock_domain;
|
|
};
|
|
|
|
/* Flags for struct acpi_srat_gicc_affinity */
|
|
|
|
#define ACPI_SRAT_GICC_ENABLED (1) /* 00: Use affinity structure */
|
|
|
|
/* 4: GCC ITS Affinity (ACPI 6.2) */
|
|
|
|
struct acpi_srat_gic_its_affinity {
|
|
struct acpi_subtable_header header;
|
|
u32 proximity_domain;
|
|
u16 reserved;
|
|
u32 its_id;
|
|
};
|
|
|
|
/* Reset to default packing */
|
|
|
|
#pragma pack()
|
|
|
|
#endif /* __ACTBL1_H__ */
|