371 lines
8.6 KiB
C
371 lines
8.6 KiB
C
/*
|
|
* PMC MSP EHCI (Host Controller Driver) for USB.
|
|
*
|
|
* (C) Copyright 2006-2010 PMC-Sierra Inc
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
*/
|
|
|
|
/* includes */
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/usb.h>
|
|
#include <msp_usb.h>
|
|
|
|
/* stream disable*/
|
|
#define USB_CTRL_MODE_STREAM_DISABLE 0x10
|
|
|
|
/* threshold */
|
|
#define USB_CTRL_FIFO_THRESH 0x00300000
|
|
|
|
/* register offset for usb_mode */
|
|
#define USB_EHCI_REG_USB_MODE 0x68
|
|
|
|
/* register offset for usb fifo */
|
|
#define USB_EHCI_REG_USB_FIFO 0x24
|
|
|
|
/* register offset for usb status */
|
|
#define USB_EHCI_REG_USB_STATUS 0x44
|
|
|
|
/* serial/parallel transceiver */
|
|
#define USB_EHCI_REG_BIT_STAT_STS (1<<29)
|
|
|
|
/* TWI USB0 host device pin */
|
|
#define MSP_PIN_USB0_HOST_DEV 49
|
|
|
|
/* TWI USB1 host device pin */
|
|
#define MSP_PIN_USB1_HOST_DEV 50
|
|
|
|
|
|
static void usb_hcd_tdi_set_mode(struct ehci_hcd *ehci)
|
|
{
|
|
u8 *base;
|
|
u8 *statreg;
|
|
u8 *fiforeg;
|
|
u32 val;
|
|
struct ehci_regs *reg_base = ehci->regs;
|
|
|
|
/* get register base */
|
|
base = (u8 *)reg_base + USB_EHCI_REG_USB_MODE;
|
|
statreg = (u8 *)reg_base + USB_EHCI_REG_USB_STATUS;
|
|
fiforeg = (u8 *)reg_base + USB_EHCI_REG_USB_FIFO;
|
|
|
|
/* Disable controller mode stream */
|
|
val = ehci_readl(ehci, (u32 *)base);
|
|
ehci_writel(ehci, (val | USB_CTRL_MODE_STREAM_DISABLE),
|
|
(u32 *)base);
|
|
|
|
/* clear STS to select parallel transceiver interface */
|
|
val = ehci_readl(ehci, (u32 *)statreg);
|
|
val = val & ~USB_EHCI_REG_BIT_STAT_STS;
|
|
ehci_writel(ehci, val, (u32 *)statreg);
|
|
|
|
/* write to set the proper fifo threshold */
|
|
ehci_writel(ehci, USB_CTRL_FIFO_THRESH, (u32 *)fiforeg);
|
|
|
|
/* set TWI GPIO USB_HOST_DEV pin high */
|
|
gpio_direction_output(MSP_PIN_USB0_HOST_DEV, 1);
|
|
#ifdef CONFIG_MSP_HAS_DUAL_USB
|
|
gpio_direction_output(MSP_PIN_USB1_HOST_DEV, 1);
|
|
#endif
|
|
}
|
|
|
|
/* called during probe() after chip reset completes */
|
|
static int ehci_msp_setup(struct usb_hcd *hcd)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
int retval;
|
|
|
|
ehci->big_endian_mmio = 1;
|
|
ehci->big_endian_desc = 1;
|
|
|
|
ehci->caps = hcd->regs;
|
|
hcd->has_tt = 1;
|
|
|
|
retval = ehci_setup(hcd);
|
|
if (retval)
|
|
return retval;
|
|
|
|
usb_hcd_tdi_set_mode(ehci);
|
|
|
|
return retval;
|
|
}
|
|
|
|
|
|
/* configure so an HC device and id are always provided
|
|
* always called with process context; sleeping is OK
|
|
*/
|
|
|
|
static int usb_hcd_msp_map_regs(struct mspusb_device *dev)
|
|
{
|
|
struct resource *res;
|
|
struct platform_device *pdev = &dev->dev;
|
|
u32 res_len;
|
|
int retval;
|
|
|
|
/* MAB register space */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
if (res == NULL)
|
|
return -ENOMEM;
|
|
res_len = resource_size(res);
|
|
if (!request_mem_region(res->start, res_len, "mab regs"))
|
|
return -EBUSY;
|
|
|
|
dev->mab_regs = ioremap_nocache(res->start, res_len);
|
|
if (dev->mab_regs == NULL) {
|
|
retval = -ENOMEM;
|
|
goto err1;
|
|
}
|
|
|
|
/* MSP USB register space */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
|
|
if (res == NULL) {
|
|
retval = -ENOMEM;
|
|
goto err2;
|
|
}
|
|
res_len = resource_size(res);
|
|
if (!request_mem_region(res->start, res_len, "usbid regs")) {
|
|
retval = -EBUSY;
|
|
goto err2;
|
|
}
|
|
dev->usbid_regs = ioremap_nocache(res->start, res_len);
|
|
if (dev->usbid_regs == NULL) {
|
|
retval = -ENOMEM;
|
|
goto err3;
|
|
}
|
|
|
|
return 0;
|
|
err3:
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
|
|
res_len = resource_size(res);
|
|
release_mem_region(res->start, res_len);
|
|
err2:
|
|
iounmap(dev->mab_regs);
|
|
err1:
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
res_len = resource_size(res);
|
|
release_mem_region(res->start, res_len);
|
|
dev_err(&pdev->dev, "Failed to map non-EHCI regs.\n");
|
|
return retval;
|
|
}
|
|
|
|
/**
|
|
* usb_hcd_msp_probe - initialize PMC MSP-based HCDs
|
|
* Context: !in_interrupt()
|
|
*
|
|
* Allocates basic resources for this USB host controller, and
|
|
* then invokes the start() method for the HCD associated with it
|
|
* through the hotplug entry's driver_data.
|
|
*
|
|
*/
|
|
int usb_hcd_msp_probe(const struct hc_driver *driver,
|
|
struct platform_device *dev)
|
|
{
|
|
int retval;
|
|
struct usb_hcd *hcd;
|
|
struct resource *res;
|
|
struct ehci_hcd *ehci ;
|
|
|
|
hcd = usb_create_hcd(driver, &dev->dev, "pmcmsp");
|
|
if (!hcd)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
|
if (res == NULL) {
|
|
pr_debug("No IOMEM resource info for %s.\n", dev->name);
|
|
retval = -ENOMEM;
|
|
goto err1;
|
|
}
|
|
hcd->rsrc_start = res->start;
|
|
hcd->rsrc_len = resource_size(res);
|
|
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, dev->name)) {
|
|
retval = -EBUSY;
|
|
goto err1;
|
|
}
|
|
hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
|
|
if (!hcd->regs) {
|
|
pr_debug("ioremap failed");
|
|
retval = -ENOMEM;
|
|
goto err2;
|
|
}
|
|
|
|
res = platform_get_resource(dev, IORESOURCE_IRQ, 0);
|
|
if (res == NULL) {
|
|
dev_err(&dev->dev, "No IRQ resource info for %s.\n", dev->name);
|
|
retval = -ENOMEM;
|
|
goto err3;
|
|
}
|
|
|
|
/* Map non-EHCI register spaces */
|
|
retval = usb_hcd_msp_map_regs(to_mspusb_device(dev));
|
|
if (retval != 0)
|
|
goto err3;
|
|
|
|
ehci = hcd_to_ehci(hcd);
|
|
ehci->big_endian_mmio = 1;
|
|
ehci->big_endian_desc = 1;
|
|
|
|
|
|
retval = usb_add_hcd(hcd, res->start, IRQF_SHARED);
|
|
if (retval == 0) {
|
|
device_wakeup_enable(hcd->self.controller);
|
|
return 0;
|
|
}
|
|
|
|
usb_remove_hcd(hcd);
|
|
err3:
|
|
iounmap(hcd->regs);
|
|
err2:
|
|
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
err1:
|
|
usb_put_hcd(hcd);
|
|
|
|
return retval;
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
* usb_hcd_msp_remove - shutdown processing for PMC MSP-based HCDs
|
|
* @dev: USB Host Controller being removed
|
|
* Context: !in_interrupt()
|
|
*
|
|
* Reverses the effect of usb_hcd_msp_probe(), first invoking
|
|
* the HCD's stop() method. It is always called from a thread
|
|
* context, normally "rmmod", "apmd", or something similar.
|
|
*
|
|
* may be called without controller electrically present
|
|
* may be called with controller, bus, and devices active
|
|
*/
|
|
void usb_hcd_msp_remove(struct usb_hcd *hcd, struct platform_device *dev)
|
|
{
|
|
usb_remove_hcd(hcd);
|
|
iounmap(hcd->regs);
|
|
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
usb_put_hcd(hcd);
|
|
}
|
|
|
|
#ifdef CONFIG_MSP_HAS_DUAL_USB
|
|
/*
|
|
* Wrapper around the main ehci_irq. Since both USB host controllers are
|
|
* sharing the same IRQ, need to first determine whether we're the intended
|
|
* recipient of this interrupt.
|
|
*/
|
|
static irqreturn_t ehci_msp_irq(struct usb_hcd *hcd)
|
|
{
|
|
u32 int_src;
|
|
struct device *dev = hcd->self.controller;
|
|
struct platform_device *pdev;
|
|
struct mspusb_device *mdev;
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
/* need to reverse-map a couple of containers to get our device */
|
|
pdev = to_platform_device(dev);
|
|
mdev = to_mspusb_device(pdev);
|
|
|
|
/* Check to see if this interrupt is for this host controller */
|
|
int_src = ehci_readl(ehci, &mdev->mab_regs->int_stat);
|
|
if (int_src & (1 << pdev->id))
|
|
return ehci_irq(hcd);
|
|
|
|
/* Not for this device */
|
|
return IRQ_NONE;
|
|
}
|
|
#endif /* DUAL_USB */
|
|
|
|
static const struct hc_driver ehci_msp_hc_driver = {
|
|
.description = hcd_name,
|
|
.product_desc = "PMC MSP EHCI",
|
|
.hcd_priv_size = sizeof(struct ehci_hcd),
|
|
|
|
/*
|
|
* generic hardware linkage
|
|
*/
|
|
#ifdef CONFIG_MSP_HAS_DUAL_USB
|
|
.irq = ehci_msp_irq,
|
|
#else
|
|
.irq = ehci_irq,
|
|
#endif
|
|
.flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
|
|
|
|
/*
|
|
* basic lifecycle operations
|
|
*/
|
|
.reset = ehci_msp_setup,
|
|
.shutdown = ehci_shutdown,
|
|
.start = ehci_run,
|
|
.stop = ehci_stop,
|
|
|
|
/*
|
|
* managing i/o requests and associated device resources
|
|
*/
|
|
.urb_enqueue = ehci_urb_enqueue,
|
|
.urb_dequeue = ehci_urb_dequeue,
|
|
.endpoint_disable = ehci_endpoint_disable,
|
|
.endpoint_reset = ehci_endpoint_reset,
|
|
|
|
/*
|
|
* scheduling support
|
|
*/
|
|
.get_frame_number = ehci_get_frame,
|
|
|
|
/*
|
|
* root hub support
|
|
*/
|
|
.hub_status_data = ehci_hub_status_data,
|
|
.hub_control = ehci_hub_control,
|
|
.bus_suspend = ehci_bus_suspend,
|
|
.bus_resume = ehci_bus_resume,
|
|
.relinquish_port = ehci_relinquish_port,
|
|
.port_handed_over = ehci_port_handed_over,
|
|
|
|
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
|
|
};
|
|
|
|
static int ehci_hcd_msp_drv_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
|
|
pr_debug("In ehci_hcd_msp_drv_probe");
|
|
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
gpio_request(MSP_PIN_USB0_HOST_DEV, "USB0_HOST_DEV_GPIO");
|
|
#ifdef CONFIG_MSP_HAS_DUAL_USB
|
|
gpio_request(MSP_PIN_USB1_HOST_DEV, "USB1_HOST_DEV_GPIO");
|
|
#endif
|
|
|
|
ret = usb_hcd_msp_probe(&ehci_msp_hc_driver, pdev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ehci_hcd_msp_drv_remove(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
|
|
usb_hcd_msp_remove(hcd, pdev);
|
|
|
|
/* free TWI GPIO USB_HOST_DEV pin */
|
|
gpio_free(MSP_PIN_USB0_HOST_DEV);
|
|
#ifdef CONFIG_MSP_HAS_DUAL_USB
|
|
gpio_free(MSP_PIN_USB1_HOST_DEV);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
MODULE_ALIAS("pmcmsp-ehci");
|
|
|
|
static struct platform_driver ehci_hcd_msp_driver = {
|
|
.probe = ehci_hcd_msp_drv_probe,
|
|
.remove = ehci_hcd_msp_drv_remove,
|
|
.driver = {
|
|
.name = "pmcmsp-ehci",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|