UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/usb/dwc2/hcd.h

770 lines
26 KiB
C
Raw Blame History

/*
* hcd.h - DesignWare HS OTG Controller host-mode declarations
*
* Copyright (C) 2004-2013 Synopsys, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The names of the above-listed copyright holders may not be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation; either version 2 of the License, or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __DWC2_HCD_H__
#define __DWC2_HCD_H__
/*
* This file contains the structures, constants, and interfaces for the
* Host Contoller Driver (HCD)
*
* The Host Controller Driver (HCD) is responsible for translating requests
* from the USB Driver into the appropriate actions on the DWC_otg controller.
* It isolates the USBD from the specifics of the controller by providing an
* API to the USBD.
*/
struct dwc2_qh;
/**
* struct dwc2_host_chan - Software host channel descriptor
*
* @hc_num: Host channel number, used for register address lookup
* @dev_addr: Address of the device
* @ep_num: Endpoint of the device
* @ep_is_in: Endpoint direction
* @speed: Device speed. One of the following values:
* - USB_SPEED_LOW
* - USB_SPEED_FULL
* - USB_SPEED_HIGH
* @ep_type: Endpoint type. One of the following values:
* - USB_ENDPOINT_XFER_CONTROL: 0
* - USB_ENDPOINT_XFER_ISOC: 1
* - USB_ENDPOINT_XFER_BULK: 2
* - USB_ENDPOINT_XFER_INTR: 3
* @max_packet: Max packet size in bytes
* @data_pid_start: PID for initial transaction.
* 0: DATA0
* 1: DATA2
* 2: DATA1
* 3: MDATA (non-Control EP),
* SETUP (Control EP)
* @multi_count: Number of additional periodic transactions per
* (micro)frame
* @xfer_buf: Pointer to current transfer buffer position
* @xfer_dma: DMA address of xfer_buf
* @align_buf: In Buffer DMA mode this will be used if xfer_buf is not
* DWORD aligned
* @xfer_len: Total number of bytes to transfer
* @xfer_count: Number of bytes transferred so far
* @start_pkt_count: Packet count at start of transfer
* @xfer_started: True if the transfer has been started
* @ping: True if a PING request should be issued on this channel
* @error_state: True if the error count for this transaction is non-zero
* @halt_on_queue: True if this channel should be halted the next time a
* request is queued for the channel. This is necessary in
* slave mode if no request queue space is available when
* an attempt is made to halt the channel.
* @halt_pending: True if the host channel has been halted, but the core
* is not finished flushing queued requests
* @do_split: Enable split for the channel
* @complete_split: Enable complete split
* @hub_addr: Address of high speed hub for the split
* @hub_port: Port of the low/full speed device for the split
* @xact_pos: Split transaction position. One of the following values:
* - DWC2_HCSPLT_XACTPOS_MID
* - DWC2_HCSPLT_XACTPOS_BEGIN
* - DWC2_HCSPLT_XACTPOS_END
* - DWC2_HCSPLT_XACTPOS_ALL
* @requests: Number of requests issued for this channel since it was
* assigned to the current transfer (not counting PINGs)
* @schinfo: Scheduling micro-frame bitmap
* @ntd: Number of transfer descriptors for the transfer
* @halt_status: Reason for halting the host channel
* @hcint Contents of the HCINT register when the interrupt came
* @qh: QH for the transfer being processed by this channel
* @hc_list_entry: For linking to list of host channels
* @desc_list_addr: Current QH's descriptor list DMA address
*
* This structure represents the state of a single host channel when acting in
* host mode. It contains the data items needed to transfer packets to an
* endpoint via a host channel.
*/
struct dwc2_host_chan {
u8 hc_num;
unsigned dev_addr:7;
unsigned ep_num:4;
unsigned ep_is_in:1;
unsigned speed:4;
unsigned ep_type:2;
unsigned max_packet:11;
unsigned data_pid_start:2;
#define DWC2_HC_PID_DATA0 TSIZ_SC_MC_PID_DATA0
#define DWC2_HC_PID_DATA2 TSIZ_SC_MC_PID_DATA2
#define DWC2_HC_PID_DATA1 TSIZ_SC_MC_PID_DATA1
#define DWC2_HC_PID_MDATA TSIZ_SC_MC_PID_MDATA
#define DWC2_HC_PID_SETUP TSIZ_SC_MC_PID_SETUP
unsigned multi_count:2;
u8 *xfer_buf;
dma_addr_t xfer_dma;
dma_addr_t align_buf;
u32 xfer_len;
u32 xfer_count;
u16 start_pkt_count;
u8 xfer_started;
u8 do_ping;
u8 error_state;
u8 halt_on_queue;
u8 halt_pending;
u8 do_split;
u8 complete_split;
u8 hub_addr;
u8 hub_port;
u8 xact_pos;
#define DWC2_HCSPLT_XACTPOS_MID HCSPLT_XACTPOS_MID
#define DWC2_HCSPLT_XACTPOS_END HCSPLT_XACTPOS_END
#define DWC2_HCSPLT_XACTPOS_BEGIN HCSPLT_XACTPOS_BEGIN
#define DWC2_HCSPLT_XACTPOS_ALL HCSPLT_XACTPOS_ALL
u8 requests;
u8 schinfo;
u16 ntd;
enum dwc2_halt_status halt_status;
u32 hcint;
struct dwc2_qh *qh;
struct list_head hc_list_entry;
dma_addr_t desc_list_addr;
};
struct dwc2_hcd_pipe_info {
u8 dev_addr;
u8 ep_num;
u8 pipe_type;
u8 pipe_dir;
u16 mps;
};
struct dwc2_hcd_iso_packet_desc {
u32 offset;
u32 length;
u32 actual_length;
u32 status;
};
struct dwc2_qtd;
struct dwc2_hcd_urb {
void *priv;
struct dwc2_qtd *qtd;
void *buf;
dma_addr_t dma;
void *setup_packet;
dma_addr_t setup_dma;
u32 length;
u32 actual_length;
u32 status;
u32 error_count;
u32 packet_count;
u32 flags;
u16 interval;
struct dwc2_hcd_pipe_info pipe_info;
struct dwc2_hcd_iso_packet_desc iso_descs[0];
};
/* Phases for control transfers */
enum dwc2_control_phase {
DWC2_CONTROL_SETUP,
DWC2_CONTROL_DATA,
DWC2_CONTROL_STATUS,
};
/* Transaction types */
enum dwc2_transaction_type {
DWC2_TRANSACTION_NONE,
DWC2_TRANSACTION_PERIODIC,
DWC2_TRANSACTION_NON_PERIODIC,
DWC2_TRANSACTION_ALL,
};
/**
* struct dwc2_qh - Software queue head structure
*
* @ep_type: Endpoint type. One of the following values:
* - USB_ENDPOINT_XFER_CONTROL
* - USB_ENDPOINT_XFER_BULK
* - USB_ENDPOINT_XFER_INT
* - USB_ENDPOINT_XFER_ISOC
* @ep_is_in: Endpoint direction
* @maxp: Value from wMaxPacketSize field of Endpoint Descriptor
* @dev_speed: Device speed. One of the following values:
* - USB_SPEED_LOW
* - USB_SPEED_FULL
* - USB_SPEED_HIGH
* @data_toggle: Determines the PID of the next data packet for
* non-controltransfers. Ignored for control transfers.
* One of the following values:
* - DWC2_HC_PID_DATA0
* - DWC2_HC_PID_DATA1
* @ping_state: Ping state
* @do_split: Full/low speed endpoint on high-speed hub requires split
* @td_first: Index of first activated isochronous transfer descriptor
* @td_last: Index of last activated isochronous transfer descriptor
* @usecs: Bandwidth in microseconds per (micro)frame
* @interval: Interval between transfers in (micro)frames
* @sched_frame: (Micro)frame to initialize a periodic transfer.
* The transfer executes in the following (micro)frame.
* @frame_usecs: Internal variable used by the microframe scheduler
* @start_split_frame: (Micro)frame at which last start split was initialized
* @ntd: Actual number of transfer descriptors in a list
* @dw_align_buf: Used instead of original buffer if its physical address
* is not dword-aligned
* @dw_align_buf_dma: DMA address for align_buf
* @qtd_list: List of QTDs for this QH
* @channel: Host channel currently processing transfers for this QH
* @qh_list_entry: Entry for QH in either the periodic or non-periodic
* schedule
* @desc_list: List of transfer descriptors
* @desc_list_dma: Physical address of desc_list
* @n_bytes: Xfer Bytes array. Each element corresponds to a transfer
* descriptor and indicates original XferSize value for the
* descriptor
* @tt_buffer_dirty True if clear_tt_buffer_complete is pending
*
* A Queue Head (QH) holds the static characteristics of an endpoint and
* maintains a list of transfers (QTDs) for that endpoint. A QH structure may
* be entered in either the non-periodic or periodic schedule.
*/
struct dwc2_qh {
u8 ep_type;
u8 ep_is_in;
u16 maxp;
u8 dev_speed;
u8 data_toggle;
u8 ping_state;
u8 do_split;
u8 td_first;
u8 td_last;
u16 usecs;
u16 interval;
u16 sched_frame;
u16 frame_usecs[8];
u16 start_split_frame;
u16 ntd;
u8 *dw_align_buf;
dma_addr_t dw_align_buf_dma;
struct list_head qtd_list;
struct dwc2_host_chan *channel;
struct list_head qh_list_entry;
struct dwc2_hcd_dma_desc *desc_list;
dma_addr_t desc_list_dma;
u32 *n_bytes;
unsigned tt_buffer_dirty:1;
};
/**
* struct dwc2_qtd - Software queue transfer descriptor (QTD)
*
* @control_phase: Current phase for control transfers (Setup, Data, or
* Status)
* @in_process: Indicates if this QTD is currently processed by HW
* @data_toggle: Determines the PID of the next data packet for the
* data phase of control transfers. Ignored for other
* transfer types. One of the following values:
* - DWC2_HC_PID_DATA0
* - DWC2_HC_PID_DATA1
* @complete_split: Keeps track of the current split type for FS/LS
* endpoints on a HS Hub
* @isoc_split_pos: Position of the ISOC split in full/low speed
* @isoc_frame_index: Index of the next frame descriptor for an isochronous
* transfer. A frame descriptor describes the buffer
* position and length of the data to be transferred in the
* next scheduled (micro)frame of an isochronous transfer.
* It also holds status for that transaction. The frame
* index starts at 0.
* @isoc_split_offset: Position of the ISOC split in the buffer for the
* current frame
* @ssplit_out_xfer_count: How many bytes transferred during SSPLIT OUT
* @error_count: Holds the number of bus errors that have occurred for
* a transaction within this transfer
* @n_desc: Number of DMA descriptors for this QTD
* @isoc_frame_index_last: Last activated frame (packet) index, used in
* descriptor DMA mode only
* @urb: URB for this transfer
* @qh: Queue head for this QTD
* @qtd_list_entry: For linking to the QH's list of QTDs
*
* A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
* interrupt, or isochronous transfer. A single QTD is created for each URB
* (of one of these types) submitted to the HCD. The transfer associated with
* a QTD may require one or multiple transactions.
*
* A QTD is linked to a Queue Head, which is entered in either the
* non-periodic or periodic schedule for execution. When a QTD is chosen for
* execution, some or all of its transactions may be executed. After
* execution, the state of the QTD is updated. The QTD may be retired if all
* its transactions are complete or if an error occurred. Otherwise, it
* remains in the schedule so more transactions can be executed later.
*/
struct dwc2_qtd {
enum dwc2_control_phase control_phase;
u8 in_process;
u8 data_toggle;
u8 complete_split;
u8 isoc_split_pos;
u16 isoc_frame_index;
u16 isoc_split_offset;
u32 ssplit_out_xfer_count;
u8 error_count;
u8 n_desc;
u16 isoc_frame_index_last;
struct dwc2_hcd_urb *urb;
struct dwc2_qh *qh;
struct list_head qtd_list_entry;
};
#ifdef DEBUG
struct hc_xfer_info {
struct dwc2_hsotg *hsotg;
struct dwc2_host_chan *chan;
};
#endif
/* Gets the struct usb_hcd that contains a struct dwc2_hsotg */
static inline struct usb_hcd *dwc2_hsotg_to_hcd(struct dwc2_hsotg *hsotg)
{
return (struct usb_hcd *)hsotg->priv;
}
/*
* Inline used to disable one channel interrupt. Channel interrupts are
* disabled when the channel is halted or released by the interrupt handler.
* There is no need to handle further interrupts of that type until the
* channel is re-assigned. In fact, subsequent handling may cause crashes
* because the channel structures are cleaned up when the channel is released.
*/
static inline void disable_hc_int(struct dwc2_hsotg *hsotg, int chnum, u32 intr)
{
u32 mask = readl(hsotg->regs + HCINTMSK(chnum));
mask &= ~intr;
writel(mask, hsotg->regs + HCINTMSK(chnum));
}
/*
* Returns the mode of operation, host or device
*/
static inline int dwc2_is_host_mode(struct dwc2_hsotg *hsotg)
{
return (readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) != 0;
}
static inline int dwc2_is_device_mode(struct dwc2_hsotg *hsotg)
{
return (readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) == 0;
}
/*
* Reads HPRT0 in preparation to modify. It keeps the WC bits 0 so that if they
* are read as 1, they won't clear when written back.
*/
static inline u32 dwc2_read_hprt0(struct dwc2_hsotg *hsotg)
{
u32 hprt0 = readl(hsotg->regs + HPRT0);
hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG | HPRT0_OVRCURRCHG);
return hprt0;
}
static inline u8 dwc2_hcd_get_ep_num(struct dwc2_hcd_pipe_info *pipe)
{
return pipe->ep_num;
}
static inline u8 dwc2_hcd_get_pipe_type(struct dwc2_hcd_pipe_info *pipe)
{
return pipe->pipe_type;
}
static inline u16 dwc2_hcd_get_mps(struct dwc2_hcd_pipe_info *pipe)
{
return pipe->mps;
}
static inline u8 dwc2_hcd_get_dev_addr(struct dwc2_hcd_pipe_info *pipe)
{
return pipe->dev_addr;
}
static inline u8 dwc2_hcd_is_pipe_isoc(struct dwc2_hcd_pipe_info *pipe)
{
return pipe->pipe_type == USB_ENDPOINT_XFER_ISOC;
}
static inline u8 dwc2_hcd_is_pipe_int(struct dwc2_hcd_pipe_info *pipe)
{
return pipe->pipe_type == USB_ENDPOINT_XFER_INT;
}
static inline u8 dwc2_hcd_is_pipe_bulk(struct dwc2_hcd_pipe_info *pipe)
{
return pipe->pipe_type == USB_ENDPOINT_XFER_BULK;
}
static inline u8 dwc2_hcd_is_pipe_control(struct dwc2_hcd_pipe_info *pipe)
{
return pipe->pipe_type == USB_ENDPOINT_XFER_CONTROL;
}
static inline u8 dwc2_hcd_is_pipe_in(struct dwc2_hcd_pipe_info *pipe)
{
return pipe->pipe_dir == USB_DIR_IN;
}
static inline u8 dwc2_hcd_is_pipe_out(struct dwc2_hcd_pipe_info *pipe)
{
return !dwc2_hcd_is_pipe_in(pipe);
}
extern int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq,
const struct dwc2_core_params *params);
extern void dwc2_hcd_remove(struct dwc2_hsotg *hsotg);
extern void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
const struct dwc2_core_params *params);
extern void dwc2_set_all_params(struct dwc2_core_params *params, int value);
extern int dwc2_get_hwparams(struct dwc2_hsotg *hsotg);
/* Transaction Execution Functions */
extern enum dwc2_transaction_type dwc2_hcd_select_transactions(
struct dwc2_hsotg *hsotg);
extern void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg,
enum dwc2_transaction_type tr_type);
/* Schedule Queue Functions */
/* Implemented in hcd_queue.c */
extern void dwc2_hcd_init_usecs(struct dwc2_hsotg *hsotg);
extern void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
extern int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
extern void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
extern void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
int sched_csplit);
extern void dwc2_hcd_qtd_init(struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb);
extern int dwc2_hcd_qtd_add(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
struct dwc2_qh **qh, gfp_t mem_flags);
/* Unlinks and frees a QTD */
static inline void dwc2_hcd_qtd_unlink_and_free(struct dwc2_hsotg *hsotg,
struct dwc2_qtd *qtd,
struct dwc2_qh *qh)
{
list_del(&qtd->qtd_list_entry);
kfree(qtd);
}
/* Descriptor DMA support functions */
extern void dwc2_hcd_start_xfer_ddma(struct dwc2_hsotg *hsotg,
struct dwc2_qh *qh);
extern void dwc2_hcd_complete_xfer_ddma(struct dwc2_hsotg *hsotg,
struct dwc2_host_chan *chan, int chnum,
enum dwc2_halt_status halt_status);
extern int dwc2_hcd_qh_init_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
gfp_t mem_flags);
extern void dwc2_hcd_qh_free_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
/* Check if QH is non-periodic */
#define dwc2_qh_is_non_per(_qh_ptr_) \
((_qh_ptr_)->ep_type == USB_ENDPOINT_XFER_BULK || \
(_qh_ptr_)->ep_type == USB_ENDPOINT_XFER_CONTROL)
#ifdef CONFIG_USB_DWC2_DEBUG_PERIODIC
static inline bool dbg_hc(struct dwc2_host_chan *hc) { return true; }
static inline bool dbg_qh(struct dwc2_qh *qh) { return true; }
static inline bool dbg_urb(struct urb *urb) { return true; }
static inline bool dbg_perio(void) { return true; }
#else /* !CONFIG_USB_DWC2_DEBUG_PERIODIC */
static inline bool dbg_hc(struct dwc2_host_chan *hc)
{
return hc->ep_type == USB_ENDPOINT_XFER_BULK ||
hc->ep_type == USB_ENDPOINT_XFER_CONTROL;
}
static inline bool dbg_qh(struct dwc2_qh *qh)
{
return qh->ep_type == USB_ENDPOINT_XFER_BULK ||
qh->ep_type == USB_ENDPOINT_XFER_CONTROL;
}
static inline bool dbg_urb(struct urb *urb)
{
return usb_pipetype(urb->pipe) == PIPE_BULK ||
usb_pipetype(urb->pipe) == PIPE_CONTROL;
}
static inline bool dbg_perio(void) { return false; }
#endif
/* High bandwidth multiplier as encoded in highspeed endpoint descriptors */
#define dwc2_hb_mult(wmaxpacketsize) (1 + (((wmaxpacketsize) >> 11) & 0x03))
/* Packet size for any kind of endpoint descriptor */
#define dwc2_max_packet(wmaxpacketsize) ((wmaxpacketsize) & 0x07ff)
/*
* Returns true if frame1 is less than or equal to frame2. The comparison is
* done modulo HFNUM_MAX_FRNUM. This accounts for the rollover of the
* frame number when the max frame number is reached.
*/
static inline int dwc2_frame_num_le(u16 frame1, u16 frame2)
{
return ((frame2 - frame1) & HFNUM_MAX_FRNUM) <= (HFNUM_MAX_FRNUM >> 1);
}
/*
* Returns true if frame1 is greater than frame2. The comparison is done
* modulo HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
* number when the max frame number is reached.
*/
static inline int dwc2_frame_num_gt(u16 frame1, u16 frame2)
{
return (frame1 != frame2) &&
((frame1 - frame2) & HFNUM_MAX_FRNUM) < (HFNUM_MAX_FRNUM >> 1);
}
/*
* Increments frame by the amount specified by inc. The addition is done
* modulo HFNUM_MAX_FRNUM. Returns the incremented value.
*/
static inline u16 dwc2_frame_num_inc(u16 frame, u16 inc)
{
return (frame + inc) & HFNUM_MAX_FRNUM;
}
static inline u16 dwc2_full_frame_num(u16 frame)
{
return (frame & HFNUM_MAX_FRNUM) >> 3;
}
static inline u16 dwc2_micro_frame_num(u16 frame)
{
return frame & 0x7;
}
/*
* Returns the Core Interrupt Status register contents, ANDed with the Core
* Interrupt Mask register contents
*/
static inline u32 dwc2_read_core_intr(struct dwc2_hsotg *hsotg)
{
return readl(hsotg->regs + GINTSTS) & readl(hsotg->regs + GINTMSK);
}
static inline u32 dwc2_hcd_urb_get_status(struct dwc2_hcd_urb *dwc2_urb)
{
return dwc2_urb->status;
}
static inline u32 dwc2_hcd_urb_get_actual_length(
struct dwc2_hcd_urb *dwc2_urb)
{
return dwc2_urb->actual_length;
}
static inline u32 dwc2_hcd_urb_get_error_count(struct dwc2_hcd_urb *dwc2_urb)
{
return dwc2_urb->error_count;
}
static inline void dwc2_hcd_urb_set_iso_desc_params(
struct dwc2_hcd_urb *dwc2_urb, int desc_num, u32 offset,
u32 length)
{
dwc2_urb->iso_descs[desc_num].offset = offset;
dwc2_urb->iso_descs[desc_num].length = length;
}
static inline u32 dwc2_hcd_urb_get_iso_desc_status(
struct dwc2_hcd_urb *dwc2_urb, int desc_num)
{
return dwc2_urb->iso_descs[desc_num].status;
}
static inline u32 dwc2_hcd_urb_get_iso_desc_actual_length(
struct dwc2_hcd_urb *dwc2_urb, int desc_num)
{
return dwc2_urb->iso_descs[desc_num].actual_length;
}
static inline int dwc2_hcd_is_bandwidth_allocated(struct dwc2_hsotg *hsotg,
struct usb_host_endpoint *ep)
{
struct dwc2_qh *qh = ep->hcpriv;
if (qh && !list_empty(&qh->qh_list_entry))
return 1;
return 0;
}
static inline u16 dwc2_hcd_get_ep_bandwidth(struct dwc2_hsotg *hsotg,
struct usb_host_endpoint *ep)
{
struct dwc2_qh *qh = ep->hcpriv;
if (!qh) {
WARN_ON(1);
return 0;
}
return qh->usecs;
}
extern void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg,
struct dwc2_host_chan *chan, int chnum,
struct dwc2_qtd *qtd);
/* HCD Core API */
/**
* dwc2_handle_hcd_intr() - Called on every hardware interrupt
*
* @hsotg: The DWC2 HCD
*
* Returns IRQ_HANDLED if interrupt is handled
* Return IRQ_NONE if interrupt is not handled
*/
extern irqreturn_t dwc2_handle_hcd_intr(struct dwc2_hsotg *hsotg);
/**
* dwc2_hcd_stop() - Halts the DWC_otg host mode operation
*
* @hsotg: The DWC2 HCD
*/
extern void dwc2_hcd_stop(struct dwc2_hsotg *hsotg);
extern void dwc2_hcd_start(struct dwc2_hsotg *hsotg);
extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg);
/**
* dwc2_hcd_is_b_host() - Returns 1 if core currently is acting as B host,
* and 0 otherwise
*
* @hsotg: The DWC2 HCD
*/
extern int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg);
/**
* dwc2_hcd_get_frame_number() - Returns current frame number
*
* @hsotg: The DWC2 HCD
*/
extern int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg);
/**
* dwc2_hcd_dump_state() - Dumps hsotg state
*
* @hsotg: The DWC2 HCD
*
* NOTE: This function will be removed once the peripheral controller code
* is integrated and the driver is stable
*/
extern void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg);
/**
* dwc2_hcd_dump_frrem() - Dumps the average frame remaining at SOF
*
* @hsotg: The DWC2 HCD
*
* This can be used to determine average interrupt latency. Frame remaining is
* also shown for start transfer and two additional sample points.
*
* NOTE: This function will be removed once the peripheral controller code
* is integrated and the driver is stable
*/
extern void dwc2_hcd_dump_frrem(struct dwc2_hsotg *hsotg);
/* URB interface */
/* Transfer flags */
#define URB_GIVEBACK_ASAP 0x1
#define URB_SEND_ZERO_PACKET 0x2
/* Host driver callbacks */
extern void dwc2_host_start(struct dwc2_hsotg *hsotg);
extern void dwc2_host_disconnect(struct dwc2_hsotg *hsotg);
extern void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context,
int *hub_addr, int *hub_port);
extern int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context);
extern void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
int status);
#ifdef DEBUG
/*
* Macro to sample the remaining PHY clocks left in the current frame. This
* may be used during debugging to determine the average time it takes to
* execute sections of code. There are two possible sample points, "a" and
* "b", so the _letter_ argument must be one of these values.
*
* To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
* example, "cat /sys/devices/lm0/hcd_frrem".
*/
#define dwc2_sample_frrem(_hcd_, _qh_, _letter_) \
do { \
struct hfnum_data _hfnum_; \
struct dwc2_qtd *_qtd_; \
\
_qtd_ = list_entry((_qh_)->qtd_list.next, struct dwc2_qtd, \
qtd_list_entry); \
if (usb_pipeint(_qtd_->urb->pipe) && \
(_qh_)->start_split_frame != 0 && !_qtd_->complete_split) { \
_hfnum_.d32 = readl((_hcd_)->regs + HFNUM); \
switch (_hfnum_.b.frnum & 0x7) { \
case 7: \
(_hcd_)->hfnum_7_samples_##_letter_++; \
(_hcd_)->hfnum_7_frrem_accum_##_letter_ += \
_hfnum_.b.frrem; \
break; \
case 0: \
(_hcd_)->hfnum_0_samples_##_letter_++; \
(_hcd_)->hfnum_0_frrem_accum_##_letter_ += \
_hfnum_.b.frrem; \
break; \
default: \
(_hcd_)->hfnum_other_samples_##_letter_++; \
(_hcd_)->hfnum_other_frrem_accum_##_letter_ += \
_hfnum_.b.frrem; \
break; \
} \
} \
} while (0)
#else
#define dwc2_sample_frrem(_hcd_, _qh_, _letter_) do {} while (0)
#endif
#endif /* __DWC2_HCD_H__ */
Reference in New Issue View Git Blame Copy Permalink