725 lines
16 KiB
C
725 lines
16 KiB
C
/*
|
|
* MCP23S08 SPI/GPIO gpio expander driver
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/device.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/module.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/mcp23s08.h>
|
|
#include <linux/slab.h>
|
|
#include <asm/byteorder.h>
|
|
|
|
/**
|
|
* MCP types supported by driver
|
|
*/
|
|
#define MCP_TYPE_S08 0
|
|
#define MCP_TYPE_S17 1
|
|
#define MCP_TYPE_008 2
|
|
#define MCP_TYPE_017 3
|
|
|
|
/* Registers are all 8 bits wide.
|
|
*
|
|
* The mcp23s17 has twice as many bits, and can be configured to work
|
|
* with either 16 bit registers or with two adjacent 8 bit banks.
|
|
*/
|
|
#define MCP_IODIR 0x00 /* init/reset: all ones */
|
|
#define MCP_IPOL 0x01
|
|
#define MCP_GPINTEN 0x02
|
|
#define MCP_DEFVAL 0x03
|
|
#define MCP_INTCON 0x04
|
|
#define MCP_IOCON 0x05
|
|
# define IOCON_SEQOP (1 << 5)
|
|
# define IOCON_HAEN (1 << 3)
|
|
# define IOCON_ODR (1 << 2)
|
|
# define IOCON_INTPOL (1 << 1)
|
|
#define MCP_GPPU 0x06
|
|
#define MCP_INTF 0x07
|
|
#define MCP_INTCAP 0x08
|
|
#define MCP_GPIO 0x09
|
|
#define MCP_OLAT 0x0a
|
|
|
|
struct mcp23s08;
|
|
|
|
struct mcp23s08_ops {
|
|
int (*read)(struct mcp23s08 *mcp, unsigned reg);
|
|
int (*write)(struct mcp23s08 *mcp, unsigned reg, unsigned val);
|
|
int (*read_regs)(struct mcp23s08 *mcp, unsigned reg,
|
|
u16 *vals, unsigned n);
|
|
};
|
|
|
|
struct mcp23s08 {
|
|
u8 addr;
|
|
|
|
u16 cache[11];
|
|
/* lock protects the cached values */
|
|
struct mutex lock;
|
|
|
|
struct gpio_chip chip;
|
|
|
|
const struct mcp23s08_ops *ops;
|
|
void *data; /* ops specific data */
|
|
};
|
|
|
|
/* A given spi_device can represent up to eight mcp23sxx chips
|
|
* sharing the same chipselect but using different addresses
|
|
* (e.g. chips #0 and #3 might be populated, but not #1 or $2).
|
|
* Driver data holds all the per-chip data.
|
|
*/
|
|
struct mcp23s08_driver_data {
|
|
unsigned ngpio;
|
|
struct mcp23s08 *mcp[8];
|
|
struct mcp23s08 chip[];
|
|
};
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
#if IS_ENABLED(CONFIG_I2C)
|
|
|
|
static int mcp23008_read(struct mcp23s08 *mcp, unsigned reg)
|
|
{
|
|
return i2c_smbus_read_byte_data(mcp->data, reg);
|
|
}
|
|
|
|
static int mcp23008_write(struct mcp23s08 *mcp, unsigned reg, unsigned val)
|
|
{
|
|
return i2c_smbus_write_byte_data(mcp->data, reg, val);
|
|
}
|
|
|
|
static int
|
|
mcp23008_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n)
|
|
{
|
|
while (n--) {
|
|
int ret = mcp23008_read(mcp, reg++);
|
|
if (ret < 0)
|
|
return ret;
|
|
*vals++ = ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mcp23017_read(struct mcp23s08 *mcp, unsigned reg)
|
|
{
|
|
return i2c_smbus_read_word_data(mcp->data, reg << 1);
|
|
}
|
|
|
|
static int mcp23017_write(struct mcp23s08 *mcp, unsigned reg, unsigned val)
|
|
{
|
|
return i2c_smbus_write_word_data(mcp->data, reg << 1, val);
|
|
}
|
|
|
|
static int
|
|
mcp23017_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n)
|
|
{
|
|
while (n--) {
|
|
int ret = mcp23017_read(mcp, reg++);
|
|
if (ret < 0)
|
|
return ret;
|
|
*vals++ = ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mcp23s08_ops mcp23008_ops = {
|
|
.read = mcp23008_read,
|
|
.write = mcp23008_write,
|
|
.read_regs = mcp23008_read_regs,
|
|
};
|
|
|
|
static const struct mcp23s08_ops mcp23017_ops = {
|
|
.read = mcp23017_read,
|
|
.write = mcp23017_write,
|
|
.read_regs = mcp23017_read_regs,
|
|
};
|
|
|
|
#endif /* CONFIG_I2C */
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_SPI_MASTER
|
|
|
|
static int mcp23s08_read(struct mcp23s08 *mcp, unsigned reg)
|
|
{
|
|
u8 tx[2], rx[1];
|
|
int status;
|
|
|
|
tx[0] = mcp->addr | 0x01;
|
|
tx[1] = reg;
|
|
status = spi_write_then_read(mcp->data, tx, sizeof tx, rx, sizeof rx);
|
|
return (status < 0) ? status : rx[0];
|
|
}
|
|
|
|
static int mcp23s08_write(struct mcp23s08 *mcp, unsigned reg, unsigned val)
|
|
{
|
|
u8 tx[3];
|
|
|
|
tx[0] = mcp->addr;
|
|
tx[1] = reg;
|
|
tx[2] = val;
|
|
return spi_write_then_read(mcp->data, tx, sizeof tx, NULL, 0);
|
|
}
|
|
|
|
static int
|
|
mcp23s08_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n)
|
|
{
|
|
u8 tx[2], *tmp;
|
|
int status;
|
|
|
|
if ((n + reg) > sizeof mcp->cache)
|
|
return -EINVAL;
|
|
tx[0] = mcp->addr | 0x01;
|
|
tx[1] = reg;
|
|
|
|
tmp = (u8 *)vals;
|
|
status = spi_write_then_read(mcp->data, tx, sizeof tx, tmp, n);
|
|
if (status >= 0) {
|
|
while (n--)
|
|
vals[n] = tmp[n]; /* expand to 16bit */
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static int mcp23s17_read(struct mcp23s08 *mcp, unsigned reg)
|
|
{
|
|
u8 tx[2], rx[2];
|
|
int status;
|
|
|
|
tx[0] = mcp->addr | 0x01;
|
|
tx[1] = reg << 1;
|
|
status = spi_write_then_read(mcp->data, tx, sizeof tx, rx, sizeof rx);
|
|
return (status < 0) ? status : (rx[0] | (rx[1] << 8));
|
|
}
|
|
|
|
static int mcp23s17_write(struct mcp23s08 *mcp, unsigned reg, unsigned val)
|
|
{
|
|
u8 tx[4];
|
|
|
|
tx[0] = mcp->addr;
|
|
tx[1] = reg << 1;
|
|
tx[2] = val;
|
|
tx[3] = val >> 8;
|
|
return spi_write_then_read(mcp->data, tx, sizeof tx, NULL, 0);
|
|
}
|
|
|
|
static int
|
|
mcp23s17_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n)
|
|
{
|
|
u8 tx[2];
|
|
int status;
|
|
|
|
if ((n + reg) > sizeof mcp->cache)
|
|
return -EINVAL;
|
|
tx[0] = mcp->addr | 0x01;
|
|
tx[1] = reg << 1;
|
|
|
|
status = spi_write_then_read(mcp->data, tx, sizeof tx,
|
|
(u8 *)vals, n * 2);
|
|
if (status >= 0) {
|
|
while (n--)
|
|
vals[n] = __le16_to_cpu((__le16)vals[n]);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static const struct mcp23s08_ops mcp23s08_ops = {
|
|
.read = mcp23s08_read,
|
|
.write = mcp23s08_write,
|
|
.read_regs = mcp23s08_read_regs,
|
|
};
|
|
|
|
static const struct mcp23s08_ops mcp23s17_ops = {
|
|
.read = mcp23s17_read,
|
|
.write = mcp23s17_write,
|
|
.read_regs = mcp23s17_read_regs,
|
|
};
|
|
|
|
#endif /* CONFIG_SPI_MASTER */
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
static int mcp23s08_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip);
|
|
int status;
|
|
|
|
mutex_lock(&mcp->lock);
|
|
mcp->cache[MCP_IODIR] |= (1 << offset);
|
|
status = mcp->ops->write(mcp, MCP_IODIR, mcp->cache[MCP_IODIR]);
|
|
mutex_unlock(&mcp->lock);
|
|
return status;
|
|
}
|
|
|
|
static int mcp23s08_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip);
|
|
int status;
|
|
|
|
mutex_lock(&mcp->lock);
|
|
|
|
/* REVISIT reading this clears any IRQ ... */
|
|
status = mcp->ops->read(mcp, MCP_GPIO);
|
|
if (status < 0)
|
|
status = 0;
|
|
else {
|
|
mcp->cache[MCP_GPIO] = status;
|
|
status = !!(status & (1 << offset));
|
|
}
|
|
mutex_unlock(&mcp->lock);
|
|
return status;
|
|
}
|
|
|
|
static int __mcp23s08_set(struct mcp23s08 *mcp, unsigned mask, int value)
|
|
{
|
|
unsigned olat = mcp->cache[MCP_OLAT];
|
|
|
|
if (value)
|
|
olat |= mask;
|
|
else
|
|
olat &= ~mask;
|
|
mcp->cache[MCP_OLAT] = olat;
|
|
return mcp->ops->write(mcp, MCP_OLAT, olat);
|
|
}
|
|
|
|
static void mcp23s08_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip);
|
|
unsigned mask = 1 << offset;
|
|
|
|
mutex_lock(&mcp->lock);
|
|
__mcp23s08_set(mcp, mask, value);
|
|
mutex_unlock(&mcp->lock);
|
|
}
|
|
|
|
static int
|
|
mcp23s08_direction_output(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip);
|
|
unsigned mask = 1 << offset;
|
|
int status;
|
|
|
|
mutex_lock(&mcp->lock);
|
|
status = __mcp23s08_set(mcp, mask, value);
|
|
if (status == 0) {
|
|
mcp->cache[MCP_IODIR] &= ~mask;
|
|
status = mcp->ops->write(mcp, MCP_IODIR, mcp->cache[MCP_IODIR]);
|
|
}
|
|
mutex_unlock(&mcp->lock);
|
|
return status;
|
|
}
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
|
|
#include <linux/seq_file.h>
|
|
|
|
/*
|
|
* This shows more info than the generic gpio dump code:
|
|
* pullups, deglitching, open drain drive.
|
|
*/
|
|
static void mcp23s08_dbg_show(struct seq_file *s, struct gpio_chip *chip)
|
|
{
|
|
struct mcp23s08 *mcp;
|
|
char bank;
|
|
int t;
|
|
unsigned mask;
|
|
|
|
mcp = container_of(chip, struct mcp23s08, chip);
|
|
|
|
/* NOTE: we only handle one bank for now ... */
|
|
bank = '0' + ((mcp->addr >> 1) & 0x7);
|
|
|
|
mutex_lock(&mcp->lock);
|
|
t = mcp->ops->read_regs(mcp, 0, mcp->cache, ARRAY_SIZE(mcp->cache));
|
|
if (t < 0) {
|
|
seq_printf(s, " I/O ERROR %d\n", t);
|
|
goto done;
|
|
}
|
|
|
|
for (t = 0, mask = 1; t < chip->ngpio; t++, mask <<= 1) {
|
|
const char *label;
|
|
|
|
label = gpiochip_is_requested(chip, t);
|
|
if (!label)
|
|
continue;
|
|
|
|
seq_printf(s, " gpio-%-3d P%c.%d (%-12s) %s %s %s",
|
|
chip->base + t, bank, t, label,
|
|
(mcp->cache[MCP_IODIR] & mask) ? "in " : "out",
|
|
(mcp->cache[MCP_GPIO] & mask) ? "hi" : "lo",
|
|
(mcp->cache[MCP_GPPU] & mask) ? "up" : " ");
|
|
/* NOTE: ignoring the irq-related registers */
|
|
seq_printf(s, "\n");
|
|
}
|
|
done:
|
|
mutex_unlock(&mcp->lock);
|
|
}
|
|
|
|
#else
|
|
#define mcp23s08_dbg_show NULL
|
|
#endif
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
|
|
void *data, unsigned addr,
|
|
unsigned type, unsigned base, unsigned pullups)
|
|
{
|
|
int status;
|
|
|
|
mutex_init(&mcp->lock);
|
|
|
|
mcp->data = data;
|
|
mcp->addr = addr;
|
|
|
|
mcp->chip.direction_input = mcp23s08_direction_input;
|
|
mcp->chip.get = mcp23s08_get;
|
|
mcp->chip.direction_output = mcp23s08_direction_output;
|
|
mcp->chip.set = mcp23s08_set;
|
|
mcp->chip.dbg_show = mcp23s08_dbg_show;
|
|
|
|
switch (type) {
|
|
#ifdef CONFIG_SPI_MASTER
|
|
case MCP_TYPE_S08:
|
|
mcp->ops = &mcp23s08_ops;
|
|
mcp->chip.ngpio = 8;
|
|
mcp->chip.label = "mcp23s08";
|
|
break;
|
|
|
|
case MCP_TYPE_S17:
|
|
mcp->ops = &mcp23s17_ops;
|
|
mcp->chip.ngpio = 16;
|
|
mcp->chip.label = "mcp23s17";
|
|
break;
|
|
#endif /* CONFIG_SPI_MASTER */
|
|
|
|
#if IS_ENABLED(CONFIG_I2C)
|
|
case MCP_TYPE_008:
|
|
mcp->ops = &mcp23008_ops;
|
|
mcp->chip.ngpio = 8;
|
|
mcp->chip.label = "mcp23008";
|
|
break;
|
|
|
|
case MCP_TYPE_017:
|
|
mcp->ops = &mcp23017_ops;
|
|
mcp->chip.ngpio = 16;
|
|
mcp->chip.label = "mcp23017";
|
|
break;
|
|
#endif /* CONFIG_I2C */
|
|
|
|
default:
|
|
dev_err(dev, "invalid device type (%d)\n", type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mcp->chip.base = base;
|
|
mcp->chip.can_sleep = 1;
|
|
mcp->chip.dev = dev;
|
|
mcp->chip.owner = THIS_MODULE;
|
|
|
|
/* verify MCP_IOCON.SEQOP = 0, so sequential reads work,
|
|
* and MCP_IOCON.HAEN = 1, so we work with all chips.
|
|
*/
|
|
status = mcp->ops->read(mcp, MCP_IOCON);
|
|
if (status < 0)
|
|
goto fail;
|
|
if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN)) {
|
|
/* mcp23s17 has IOCON twice, make sure they are in sync */
|
|
status &= ~(IOCON_SEQOP | (IOCON_SEQOP << 8));
|
|
status |= IOCON_HAEN | (IOCON_HAEN << 8);
|
|
status = mcp->ops->write(mcp, MCP_IOCON, status);
|
|
if (status < 0)
|
|
goto fail;
|
|
}
|
|
|
|
/* configure ~100K pullups */
|
|
status = mcp->ops->write(mcp, MCP_GPPU, pullups);
|
|
if (status < 0)
|
|
goto fail;
|
|
|
|
status = mcp->ops->read_regs(mcp, 0, mcp->cache, ARRAY_SIZE(mcp->cache));
|
|
if (status < 0)
|
|
goto fail;
|
|
|
|
/* disable inverter on input */
|
|
if (mcp->cache[MCP_IPOL] != 0) {
|
|
mcp->cache[MCP_IPOL] = 0;
|
|
status = mcp->ops->write(mcp, MCP_IPOL, 0);
|
|
if (status < 0)
|
|
goto fail;
|
|
}
|
|
|
|
/* disable irqs */
|
|
if (mcp->cache[MCP_GPINTEN] != 0) {
|
|
mcp->cache[MCP_GPINTEN] = 0;
|
|
status = mcp->ops->write(mcp, MCP_GPINTEN, 0);
|
|
if (status < 0)
|
|
goto fail;
|
|
}
|
|
|
|
status = gpiochip_add(&mcp->chip);
|
|
fail:
|
|
if (status < 0)
|
|
dev_dbg(dev, "can't setup chip %d, --> %d\n",
|
|
addr, status);
|
|
return status;
|
|
}
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
#if IS_ENABLED(CONFIG_I2C)
|
|
|
|
static int __devinit mcp230xx_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct mcp23s08_platform_data *pdata;
|
|
struct mcp23s08 *mcp;
|
|
int status;
|
|
|
|
pdata = client->dev.platform_data;
|
|
if (!pdata || !gpio_is_valid(pdata->base)) {
|
|
dev_dbg(&client->dev, "invalid or missing platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mcp = kzalloc(sizeof *mcp, GFP_KERNEL);
|
|
if (!mcp)
|
|
return -ENOMEM;
|
|
|
|
status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr,
|
|
id->driver_data, pdata->base,
|
|
pdata->chip[0].pullups);
|
|
if (status)
|
|
goto fail;
|
|
|
|
i2c_set_clientdata(client, mcp);
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
kfree(mcp);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int __devexit mcp230xx_remove(struct i2c_client *client)
|
|
{
|
|
struct mcp23s08 *mcp = i2c_get_clientdata(client);
|
|
int status;
|
|
|
|
status = gpiochip_remove(&mcp->chip);
|
|
if (status == 0)
|
|
kfree(mcp);
|
|
|
|
return status;
|
|
}
|
|
|
|
static const struct i2c_device_id mcp230xx_id[] = {
|
|
{ "mcp23008", MCP_TYPE_008 },
|
|
{ "mcp23017", MCP_TYPE_017 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mcp230xx_id);
|
|
|
|
static struct i2c_driver mcp230xx_driver = {
|
|
.driver = {
|
|
.name = "mcp230xx",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = mcp230xx_probe,
|
|
.remove = __devexit_p(mcp230xx_remove),
|
|
.id_table = mcp230xx_id,
|
|
};
|
|
|
|
static int __init mcp23s08_i2c_init(void)
|
|
{
|
|
return i2c_add_driver(&mcp230xx_driver);
|
|
}
|
|
|
|
static void mcp23s08_i2c_exit(void)
|
|
{
|
|
i2c_del_driver(&mcp230xx_driver);
|
|
}
|
|
|
|
#else
|
|
|
|
static int __init mcp23s08_i2c_init(void) { return 0; }
|
|
static void mcp23s08_i2c_exit(void) { }
|
|
|
|
#endif /* CONFIG_I2C */
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_SPI_MASTER
|
|
|
|
static int mcp23s08_probe(struct spi_device *spi)
|
|
{
|
|
struct mcp23s08_platform_data *pdata;
|
|
unsigned addr;
|
|
unsigned chips = 0;
|
|
struct mcp23s08_driver_data *data;
|
|
int status, type;
|
|
unsigned base;
|
|
|
|
type = spi_get_device_id(spi)->driver_data;
|
|
|
|
pdata = spi->dev.platform_data;
|
|
if (!pdata || !gpio_is_valid(pdata->base)) {
|
|
dev_dbg(&spi->dev, "invalid or missing platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) {
|
|
if (!pdata->chip[addr].is_present)
|
|
continue;
|
|
chips++;
|
|
if ((type == MCP_TYPE_S08) && (addr > 3)) {
|
|
dev_err(&spi->dev,
|
|
"mcp23s08 only supports address 0..3\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
if (!chips)
|
|
return -ENODEV;
|
|
|
|
data = kzalloc(sizeof *data + chips * sizeof(struct mcp23s08),
|
|
GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
spi_set_drvdata(spi, data);
|
|
|
|
base = pdata->base;
|
|
for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) {
|
|
if (!pdata->chip[addr].is_present)
|
|
continue;
|
|
chips--;
|
|
data->mcp[addr] = &data->chip[chips];
|
|
status = mcp23s08_probe_one(data->mcp[addr], &spi->dev, spi,
|
|
0x40 | (addr << 1), type, base,
|
|
pdata->chip[addr].pullups);
|
|
if (status < 0)
|
|
goto fail;
|
|
|
|
base += (type == MCP_TYPE_S17) ? 16 : 8;
|
|
}
|
|
data->ngpio = base - pdata->base;
|
|
|
|
/* NOTE: these chips have a relatively sane IRQ framework, with
|
|
* per-signal masking and level/edge triggering. It's not yet
|
|
* handled here...
|
|
*/
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
for (addr = 0; addr < ARRAY_SIZE(data->mcp); addr++) {
|
|
int tmp;
|
|
|
|
if (!data->mcp[addr])
|
|
continue;
|
|
tmp = gpiochip_remove(&data->mcp[addr]->chip);
|
|
if (tmp < 0)
|
|
dev_err(&spi->dev, "%s --> %d\n", "remove", tmp);
|
|
}
|
|
kfree(data);
|
|
return status;
|
|
}
|
|
|
|
static int mcp23s08_remove(struct spi_device *spi)
|
|
{
|
|
struct mcp23s08_driver_data *data = spi_get_drvdata(spi);
|
|
unsigned addr;
|
|
int status = 0;
|
|
|
|
for (addr = 0; addr < ARRAY_SIZE(data->mcp); addr++) {
|
|
int tmp;
|
|
|
|
if (!data->mcp[addr])
|
|
continue;
|
|
|
|
tmp = gpiochip_remove(&data->mcp[addr]->chip);
|
|
if (tmp < 0) {
|
|
dev_err(&spi->dev, "%s --> %d\n", "remove", tmp);
|
|
status = tmp;
|
|
}
|
|
}
|
|
if (status == 0)
|
|
kfree(data);
|
|
return status;
|
|
}
|
|
|
|
static const struct spi_device_id mcp23s08_ids[] = {
|
|
{ "mcp23s08", MCP_TYPE_S08 },
|
|
{ "mcp23s17", MCP_TYPE_S17 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, mcp23s08_ids);
|
|
|
|
static struct spi_driver mcp23s08_driver = {
|
|
.probe = mcp23s08_probe,
|
|
.remove = mcp23s08_remove,
|
|
.id_table = mcp23s08_ids,
|
|
.driver = {
|
|
.name = "mcp23s08",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init mcp23s08_spi_init(void)
|
|
{
|
|
return spi_register_driver(&mcp23s08_driver);
|
|
}
|
|
|
|
static void mcp23s08_spi_exit(void)
|
|
{
|
|
spi_unregister_driver(&mcp23s08_driver);
|
|
}
|
|
|
|
#else
|
|
|
|
static int __init mcp23s08_spi_init(void) { return 0; }
|
|
static void mcp23s08_spi_exit(void) { }
|
|
|
|
#endif /* CONFIG_SPI_MASTER */
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
static int __init mcp23s08_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = mcp23s08_spi_init();
|
|
if (ret)
|
|
goto spi_fail;
|
|
|
|
ret = mcp23s08_i2c_init();
|
|
if (ret)
|
|
goto i2c_fail;
|
|
|
|
return 0;
|
|
|
|
i2c_fail:
|
|
mcp23s08_spi_exit();
|
|
spi_fail:
|
|
return ret;
|
|
}
|
|
/* register after spi/i2c postcore initcall and before
|
|
* subsys initcalls that may rely on these GPIOs
|
|
*/
|
|
subsys_initcall(mcp23s08_init);
|
|
|
|
static void __exit mcp23s08_exit(void)
|
|
{
|
|
mcp23s08_spi_exit();
|
|
mcp23s08_i2c_exit();
|
|
}
|
|
module_exit(mcp23s08_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|