OpenCloudOS-Kernel/drivers/clocksource/timer-atcpit100.c

267 lines
5.9 KiB
C

// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2005-2017 Andes Technology Corporation
/*
* Andestech ATCPIT100 Timer Device Driver Implementation
* Rick Chen, Andes Technology Corporation <rick@andestech.com>
*
*/
#include <linux/irq.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/cpufreq.h>
#include <linux/sched.h>
#include <linux/sched_clock.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include "timer-of.h"
#ifdef CONFIG_NDS32
#include <asm/vdso_timer_info.h>
#endif
/*
* Definition of register offsets
*/
/* ID and Revision Register */
#define ID_REV 0x0
/* Configuration Register */
#define CFG 0x10
/* Interrupt Enable Register */
#define INT_EN 0x14
#define CH_INT_EN(c, i) ((1<<i)<<(4*c))
#define CH0INT0EN 0x01
/* Interrupt Status Register */
#define INT_STA 0x18
#define CH0INT0 0x01
/* Channel Enable Register */
#define CH_EN 0x1C
#define CH0TMR0EN 0x1
#define CH1TMR0EN 0x10
/* Channel 0 , 1 Control Register */
#define CH0_CTL (0x20)
#define CH1_CTL (0x20 + 0x10)
/* Channel clock source , bit 3 , 0:External clock , 1:APB clock */
#define APB_CLK BIT(3)
/* Channel mode , bit 0~2 */
#define TMR_32 0x1
#define TMR_16 0x2
#define TMR_8 0x3
/* Channel 0 , 1 Reload Register */
#define CH0_REL (0x24)
#define CH1_REL (0x24 + 0x10)
/* Channel 0 , 1 Counter Register */
#define CH0_CNT (0x28)
#define CH1_CNT (0x28 + 0x10)
#define TIMER_SYNC_TICKS 3
static void atcpit100_ch1_tmr0_en(void __iomem *base)
{
writel(~0, base + CH1_REL);
writel(APB_CLK|TMR_32, base + CH1_CTL);
}
static void atcpit100_ch0_tmr0_en(void __iomem *base)
{
writel(APB_CLK|TMR_32, base + CH0_CTL);
}
static void atcpit100_clkevt_time_setup(void __iomem *base, unsigned long delay)
{
writel(delay, base + CH0_CNT);
writel(delay, base + CH0_REL);
}
static void atcpit100_timer_clear_interrupt(void __iomem *base)
{
u32 val;
val = readl(base + INT_STA);
writel(val | CH0INT0, base + INT_STA);
}
static void atcpit100_clocksource_start(void __iomem *base)
{
u32 val;
val = readl(base + CH_EN);
writel(val | CH1TMR0EN, base + CH_EN);
}
static void atcpit100_clkevt_time_start(void __iomem *base)
{
u32 val;
val = readl(base + CH_EN);
writel(val | CH0TMR0EN, base + CH_EN);
}
static void atcpit100_clkevt_time_stop(void __iomem *base)
{
u32 val;
atcpit100_timer_clear_interrupt(base);
val = readl(base + CH_EN);
writel(val & ~CH0TMR0EN, base + CH_EN);
}
static int atcpit100_clkevt_next_event(unsigned long evt,
struct clock_event_device *clkevt)
{
u32 val;
struct timer_of *to = to_timer_of(clkevt);
val = readl(timer_of_base(to) + CH_EN);
writel(val & ~CH0TMR0EN, timer_of_base(to) + CH_EN);
writel(evt, timer_of_base(to) + CH0_REL);
writel(val | CH0TMR0EN, timer_of_base(to) + CH_EN);
return 0;
}
static int atcpit100_clkevt_set_periodic(struct clock_event_device *evt)
{
struct timer_of *to = to_timer_of(evt);
atcpit100_clkevt_time_setup(timer_of_base(to), timer_of_period(to));
atcpit100_clkevt_time_start(timer_of_base(to));
return 0;
}
static int atcpit100_clkevt_shutdown(struct clock_event_device *evt)
{
struct timer_of *to = to_timer_of(evt);
atcpit100_clkevt_time_stop(timer_of_base(to));
return 0;
}
static int atcpit100_clkevt_set_oneshot(struct clock_event_device *evt)
{
struct timer_of *to = to_timer_of(evt);
u32 val;
writel(~0x0, timer_of_base(to) + CH0_REL);
val = readl(timer_of_base(to) + CH_EN);
writel(val | CH0TMR0EN, timer_of_base(to) + CH_EN);
return 0;
}
static irqreturn_t atcpit100_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = (struct clock_event_device *)dev_id;
struct timer_of *to = to_timer_of(evt);
atcpit100_timer_clear_interrupt(timer_of_base(to));
evt->event_handler(evt);
return IRQ_HANDLED;
}
static struct timer_of to = {
.flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE,
.clkevt = {
.name = "atcpit100_tick",
.rating = 300,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_state_shutdown = atcpit100_clkevt_shutdown,
.set_state_periodic = atcpit100_clkevt_set_periodic,
.set_state_oneshot = atcpit100_clkevt_set_oneshot,
.tick_resume = atcpit100_clkevt_shutdown,
.set_next_event = atcpit100_clkevt_next_event,
.cpumask = cpu_all_mask,
},
.of_irq = {
.handler = atcpit100_timer_interrupt,
.flags = IRQF_TIMER | IRQF_IRQPOLL,
},
/*
* FIXME: we currently only support clocking using PCLK
* and using EXTCLK is not supported in the driver.
*/
.of_clk = {
.name = "PCLK",
}
};
static u64 notrace atcpit100_timer_sched_read(void)
{
return ~readl(timer_of_base(&to) + CH1_CNT);
}
#ifdef CONFIG_NDS32
static void fill_vdso_need_info(struct device_node *node)
{
struct resource timer_res;
of_address_to_resource(node, 0, &timer_res);
timer_info.mapping_base = (unsigned long)timer_res.start;
timer_info.cycle_count_down = true;
timer_info.cycle_count_reg_offset = CH1_CNT;
}
#endif
static int __init atcpit100_timer_init(struct device_node *node)
{
int ret;
u32 val;
void __iomem *base;
ret = timer_of_init(node, &to);
if (ret)
return ret;
base = timer_of_base(&to);
sched_clock_register(atcpit100_timer_sched_read, 32,
timer_of_rate(&to));
ret = clocksource_mmio_init(base + CH1_CNT,
node->name, timer_of_rate(&to), 300, 32,
clocksource_mmio_readl_down);
if (ret) {
pr_err("Failed to register clocksource\n");
return ret;
}
/* clear channel 0 timer0 interrupt */
atcpit100_timer_clear_interrupt(base);
clockevents_config_and_register(&to.clkevt, timer_of_rate(&to),
TIMER_SYNC_TICKS, 0xffffffff);
atcpit100_ch0_tmr0_en(base);
atcpit100_ch1_tmr0_en(base);
atcpit100_clocksource_start(base);
atcpit100_clkevt_time_start(base);
/* Enable channel 0 timer0 interrupt */
val = readl(base + INT_EN);
writel(val | CH0INT0EN, base + INT_EN);
#ifdef CONFIG_NDS32
fill_vdso_need_info(node);
#endif
return ret;
}
TIMER_OF_DECLARE(atcpit100, "andestech,atcpit100", atcpit100_timer_init);