OpenCloudOS-Kernel/arch/arm/mach-imx
Linus Torvalds 9896c7b57e ARM: SoC platform updates for v4.7
We get support for three new 32-bit SoC platforms this time. The amount
 of changes in arch/arm for any of them is miniscule, as all the
 interesting code is in device driver subsystems (irqchip, clk, pinctrl,
 ...) these days. I'm listing them here, as the addition of the Kconfig
 statement is the main relevant milestone for a new platform. In each
 case, some drivers are are shared with existing platforms, while
 other drivers are added for v4.7 as well, or come in a later release.
 
 - The Aspeed platform is probably the most interesting one, this is
   what most whitebox servers use as their baseboard management
   controller. We get support for the very common ast2400 and ast2500
   SoCs. The OpenBMC project focuses on this chip, and the LWN
   article about their ELC 2016 presentation at
   https://lwn.net/Articles/683320/ triggered the submission, but the
   code comes from IBM's OpenPOWER team rather than the team at
   Facebook. There are still a lot more drivers that need to get added
   over time, and I hope both teams can work together on that.
 
 - OXNAS is an old platform for Network Attached Storage devices
   from Oxford Semiconductor. There are models with ARM10 (!) and
   ARM11MPCore cores, but for now, we only support the original ARM9
   based versions.
   The product lineup was subsequently part of PLX, Avago and now the
   new Broadcom Ltd. https://wiki.openwrt.org/doc/hardware/soc/soc.oxnas
   has some more information.
 
 - V2M-MPS2 is a prototyping platform from ARM for their Cortex-M
   cores and is related to the existing Realview / Versatile Express
   lineup, but without MMU. We now support various NOMMU platforms,
   so adding a new one is fairly straightforward.
   http://infocenter.arm.com/help/topic/com.arm.doc.100112_0100_03_en/
   has detailed information about the platform.
 
 Other noteworthy updates:
 
 - Work on LPC32xx has resumed, and Vladimir Zapolskiy and Sylvain Lemieux
   are now maintaining the platform. This is an older ARM9 based
   platform from NXP (not Freescale), but it remains in use in embedded
   markets.
 
 - Kevin Hilman is now co-maintaining the Amlogic Meson platform for both
   32-bit and 64-bit ARM, and started contributing some patches.
 
 - As is often the case, work on the OMAP platforms makes up the bulk of
   the actual SoC code changes in arch/arm, but there isn't a lot of
   that either.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVzuXX2CrR//JCVInAQLTghAA0f+2V2wC6HVBfDhT1YmhbAkPF1KzgLbB
 h30fN6BtIe9mE3kR69uWgwPSzn4hTKEQXoC9m6S+XClTn6MKPrbCEYDZl4ZwIER8
 XDamxJV+6oTG+GKtKpHFkC4WPJkLthEuD34gr2xU8DFrU+y2Y5QNXi5wvSsBp8WS
 6C/70HQEy35uSyOjbjVlPi0/UKoelVw9dCO7HZBOb9lTd88hC4Gx90KFwpq6Ievf
 L20VNgOESC2y6kRbuLNbhQVsbT2Ijyz9NccVM5owFEbHkXDxJ0vQVzrNM999DVjb
 CC2v0NZMLPNJQn2RvC172QBOsOERxIRkZdJHcifydl7i2QNpr8+/YSnS7OSx3dA/
 3ZmTLejaiGUXdTGEI9dHy77s+adwTzGsH+INKotQG8qwUXzCLuUWN3GGK+Qof5Rk
 jbsGAoZ7GQz1/7NdEOcGW6pxD4mllk3McKMzNlMmddRDUPhSUg3WXu0c1AWGzfA1
 ulk6fQDaTUjvs7nokuozhguKz8OKrT6S7x/iES5tPbXLhuDqfnUdYiQ+7m2beRb5
 L9S9KK95HXnKJAI9WLOELj1vCrfbCGjlwz8YVSrwPtwwzP/wbB1Ni6tmwLrxHbLk
 SGyJEMnPs3mARIPDwDysyOs+3OUSx04uYW6YTSh8XyKNIxTCflRxr/iM5YyYEMvt
 lXMrp1sh4hc=
 =5oFu
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "We get support for three new 32-bit SoC platforms this time.

  The amount of changes in arch/arm for any of them is miniscule, as all
  the interesting code is in device driver subsystems (irqchip, clk,
  pinctrl, ...) these days.  I'm listing them here, as the addition of
  the Kconfig statement is the main relevant milestone for a new
  platform.  In each case, some drivers are are shared with existing
  platforms, while other drivers are added for v4.7 as well, or come in
  a later release.

   - The Aspeed platform is probably the most interesting one, this is
     what most whitebox servers use as their baseboard management
     controller.  We get support for the very common ast2400 and ast2500
     SoCs.  The OpenBMC project focuses on this chip, and the LWN
     article about their ELC 2016 presentation at

        https://lwn.net/Articles/683320/

     triggered the submission, but the code comes from IBM's OpenPOWER
     team rather than the team at Facebook.  There are still a lot more
     drivers that need to get added over time, and I hope both teams can
     work together on that.

   - OXNAS is an old platform for Network Attached Storage devices from
     Oxford Semiconductor.  There are models with ARM10 (!) and
     ARM11MPCore cores, but for now, we only support the original ARM9
     based versions.  The product lineup was subsequently part of PLX,
     Avago and now the new Broadcom Ltd.

        https://wiki.openwrt.org/doc/hardware/soc/soc.oxnas

     has some more information.

   - V2M-MPS2 is a prototyping platform from ARM for their Cortex-M
     cores and is related to the existing Realview / Versatile Express
     lineup, but without MMU.

     We now support various NOMMU platforms, so adding a new one is
     fairly straightforward.

        http://infocenter.arm.com/help/topic/com.arm.doc.100112_0100_03_en/

     has detailed information about the platform.

  Other noteworthy updates:

   - Work on LPC32xx has resumed, and Vladimir Zapolskiy and Sylvain
     Lemieux are now maintaining the platform.

     This is an older ARM9 based platform from NXP (not Freescale), but
     it remains in use in embedded markets.

   - Kevin Hilman is now co-maintaining the Amlogic Meson platform for
     both 32-bit and 64-bit ARM, and started contributing some patches.

   - As is often the case, work on the OMAP platforms makes up the bulk
     of the actual SoC code changes in arch/arm, but there isn't a lot
     of that either"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
  MAINTAINERS: ARM/Amlogic: add co-maintainer, misc. updates
  MAINTAINERS: add ARM/NXP LPC32XX SoC specific drivers to the section
  MAINTAINERS: add new maintainers of NXP LPC32xx SoC
  MAINTAINERS: move ARM/NXP LPC32xx record to ARM section
  arm: Add Aspeed machine
  ARM: lpc32xx: remove duplicate const on lpc32xx_auxdata_lookup
  ARM: lpc32xx: remove leftovers of legacy clock source and provider drivers
  ARM: lpc32xx: remove reboot header file
  ARM: dove: Remove CLK_IS_ROOT
  ARM: orion5x: Remove CLK_IS_ROOT
  ARM: mv78xx0: Remove CLK_IS_ROOT
  ARM: davinci: da850: use clk->set_parent for async3
  ARM: davinci: Move clock init after ioremap.
  MAINTAINERS: Update ARM Versatile Express platform entry
  ARM: vexpress/mps2: introduce MPS2 platform
  MAINTAINERS: add maintainer entry for ARM/OXNAS platform
  ARM: Add new mach-oxnas
  irqchip: versatile-fpga: add new compatible for OX810SE SoC
  ARM: uniphier: correct the call order of of_node_put()
  MAINTAINERS: fix stale TI DaVinci entries
  ...
2016-05-18 12:35:46 -07:00
..
devices ARM: mach-imx: sdhci-esdhc-imx: initialize DMA mask 2016-04-13 16:41:56 +08:00
3ds_debugboard.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
3ds_debugboard.h ARM: imx: include board headers in the same folder 2012-10-15 09:18:14 +08:00
Kconfig ARM: imx: always use TWD on IMX6Q 2016-04-12 15:56:55 +08:00
Makefile ARM: mx25: Add basic suspend/resume support 2016-02-14 11:24:18 +08:00
Makefile.boot ARM: vf610: enable Cortex-M4 configuration on Vybrid SoC 2015-05-20 23:10:14 +02:00
anatop.c ARM: imx: Add msl code support for imx6qp 2016-02-14 11:07:17 +08:00
avic.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
board-mx31lilly.h ARM: imx: include board headers in the same folder 2012-10-15 09:18:14 +08:00
board-mx31lite.h ARM: imx: include board headers in the same folder 2012-10-15 09:18:14 +08:00
board-mx31moboard.h ARM: imx: include board headers in the same folder 2012-10-15 09:18:14 +08:00
common.h ARM: mx25: Add basic suspend/resume support 2016-02-14 11:24:18 +08:00
cpu-imx5.c ARM: imx5: retrieve iim base from device tree 2014-07-18 16:10:07 +08:00
cpu-imx25.c ARM: mx25: Retrieve IIM base from dt 2015-03-13 22:06:35 +08:00
cpu-imx27.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
cpu-imx31.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
cpu-imx35.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
cpu.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
cpuidle-imx5.c cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic 2014-11-12 21:17:27 +01:00
cpuidle-imx6q.c ARM: imx6: set initial power mode in pm function 2015-06-03 14:44:31 +08:00
cpuidle-imx6sl.c ARM: imx6: set initial power mode in pm function 2015-06-03 14:44:31 +08:00
cpuidle-imx6sx.c ARM: imx6: set initial power mode in pm function 2015-06-03 14:44:31 +08:00
cpuidle.h ARM: imx: support arm power off in cpuidle for i.mx6sx 2015-01-05 21:34:29 +08:00
crmregs-imx3.h
devices-imx1.h ARM: imx: move platform device code into mach-imx 2012-10-15 09:18:15 +08:00
devices-imx21.h ARM: imx: move platform device code into mach-imx 2012-10-15 09:18:15 +08:00
devices-imx27.h ARM : i.MX27 : split code for allocation of ressources of camera and eMMA 2012-11-16 16:21:48 +01:00
devices-imx31.h ARM: imx: move platform device code into mach-imx 2012-10-15 09:18:15 +08:00
devices-imx35.h ARM: imx: prepare for removal of flexcan_platform_data 2013-06-27 15:15:08 +02:00
ehci-imx27.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
ehci-imx31.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
ehci-imx35.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
ehci.h ARM: imx5: remove imx51 non-DT support files 2014-07-18 16:10:05 +08:00
epit.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
eukrea-baseboards.h ARM: i.MX: Remove mach-cpuimx27sd board file 2014-09-01 22:00:01 +08:00
gpc.c ARM: imx6: pm: declare pm domain latency on power_state struct 2016-02-15 23:18:15 +01:00
hardware.h ARM: imx: move revision definitions and declarations into a header 2015-06-03 14:44:30 +08:00
headsmp.S ARM: imx: enable big endian mode 2016-02-02 13:31:19 +08:00
hotplug.c ARM: imx: do not return from imx_cpu_die() call 2013-10-21 09:37:31 +08:00
iim.h ARM: imx: include iim.h rather than mach/iim.h 2012-10-15 10:03:10 +08:00
imx1-dt.c ARM: i.MX1: Add devicetree support 2014-09-16 10:06:44 +08:00
imx27-dt.c cpufreq: imx: Use generic platdev driver 2016-04-25 16:18:23 +02:00
imx31-dt.c ARM: imx: clean up machine mxc_arch_reset_init_dt reset init 2014-11-22 07:39:36 +08:00
imx35-dt.c ARM: imx: clean up machine mxc_arch_reset_init_dt reset init 2014-11-22 07:39:36 +08:00
iomux-imx31.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
iomux-mx1.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-mx2x.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-mx3.h ARM: imx: Fix trivial typo in comments 2015-03-03 12:05:46 +08:00
iomux-mx21.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-mx27.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-mx35.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-v1.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
iomux-v1.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-v3.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
iomux-v3.h ARM: imx: Fix trivial typo in comments 2015-03-03 12:05:46 +08:00
irq-common.c ARM: imx: irq-common: Include header to avoid sparse warning 2013-06-17 15:45:14 +08:00
irq-common.h ARM: imx: drop support for irq priorisation 2013-12-09 13:18:25 +08:00
mach-apf9328.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-armadillo5x0.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
mach-bug.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-imx6q.c ARM: imx: Add msl code support for imx6qp 2016-02-14 11:07:17 +08:00
mach-imx6sl.c ARM: imx6: initialize CCM_CLPCR_LPM into RUN mode earlier 2015-06-03 14:49:18 +08:00
mach-imx6sx.c ARM: imx6: initialize CCM_CLPCR_LPM into RUN mode earlier 2015-06-03 14:49:18 +08:00
mach-imx6ul.c mach-imx/mach-imx6ul.c: proper constness with __initconst 2015-11-25 11:06:52 +08:00
mach-imx7d.c cpufreq: imx: Use generic platdev driver 2016-04-25 16:18:23 +02:00
mach-imx25.c ARM: mx25: Add basic suspend/resume support 2016-02-14 11:24:18 +08:00
mach-imx27_visstrim_m10.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-imx50.c ARM: imx: clean up machine mxc_arch_reset_init_dt reset init 2014-11-22 07:39:36 +08:00
mach-imx51.c cpufreq: imx: Use generic platdev driver 2016-04-25 16:18:23 +02:00
mach-imx53.c cpufreq: imx: Use generic platdev driver 2016-04-25 16:18:23 +02:00
mach-kzm_arm11_01.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-ls1021a.c ARM: imx: Add Freescale LS1021A SMP support 2014-11-23 14:56:21 +08:00
mach-mx21ads.c gpio: generic: factor into gpio_chip struct 2016-01-05 11:21:00 +01:00
mach-mx27_3ds.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-mx27ads.c ARM: SoC platform updates for v4.6 2016-03-20 14:57:08 -07:00
mach-mx31_3ds.c arm: mach-imx: Convert pr_warning to pr_warn 2014-09-16 10:09:41 +08:00
mach-mx31ads.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
mach-mx31lilly.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-mx31lite.c arm: mach-imx: Convert pr_warning to pr_warn 2014-09-16 10:09:41 +08:00
mach-mx31moboard.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
mach-mx35_3ds.c ARM: imx/iomux-v3: allow pad_list to be const 2015-03-03 12:04:41 +08:00
mach-pca100.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-pcm037.c arm: mach-imx: Convert pr_warning to pr_warn 2014-09-16 10:09:41 +08:00
mach-pcm037_eet.c ARM: imx: include common.h rather than mach/common.h 2012-10-15 10:03:10 +08:00
mach-pcm043.c ARM: imx/iomux-v3: allow pad_list to be const 2015-03-03 12:04:41 +08:00
mach-qong.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
mach-scb9328.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-vf610.c ARM: vf610: enable Cortex-M4 configuration on Vybrid SoC 2015-05-20 23:10:14 +02:00
mach-vpr200.c ARM: imx/iomux-v3: allow pad_list to be const 2015-03-03 12:04:41 +08:00
mm-imx1.c ARM: imx: move clk_prepare() out from mxc_restart() 2013-06-17 15:45:10 +08:00
mm-imx3.c Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm 2013-07-03 09:46:29 -07:00
mm-imx21.c ARM: imx: move clk_prepare() out from mxc_restart() 2013-06-17 15:45:10 +08:00
mm-imx27.c ARM: imx: move clk_prepare() out from mxc_restart() 2013-06-17 15:45:10 +08:00
mmdc.c ARM: imx: mmdc: Include "common.h" header file 2015-06-03 14:49:34 +08:00
mx1.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx2x.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx3x.h ARM: imx: move revision definitions and declarations into a header 2015-06-03 14:44:30 +08:00
mx21.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx27.h ARM: imx: move revision definitions and declarations into a header 2015-06-03 14:44:30 +08:00
mx31.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx31lilly-db.c ARM: imx: remove IRQF_DISABLED 2013-10-21 09:11:05 +08:00
mx31lite-db.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx31moboard-devboard.c ARM: imx: use PTR_ERR_OR_ZERO 2014-07-18 16:11:36 +08:00
mx31moboard-marxbot.c ARM: imx: use PTR_ERR_OR_ZERO 2014-07-18 16:11:36 +08:00
mx31moboard-smartbot.c ARM: imx: use PTR_ERR_OR_ZERO 2014-07-18 16:11:36 +08:00
mx35.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mxc.h ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
pcm037.h
platsmp.c ARM: use const and __initconst for smp_operations 2015-12-01 22:17:45 +01:00
pm-imx3.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
pm-imx5.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
pm-imx6.c ARM: imx6: fix cleanup path in imx6q_suspend_init() 2016-01-28 16:31:45 +08:00
pm-imx25.c ARM: mx25: Add basic suspend/resume support 2016-02-14 11:24:18 +08:00
pm-imx27.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
src.c ARM: imx: Make reset_control_ops const 2016-02-29 10:37:44 +08:00
ssi-fiq-ksym.c ARM: imx: merge plat-mxc into mach-imx 2012-10-15 10:02:19 +08:00
ssi-fiq.S ARM: imx: merge plat-mxc into mach-imx 2012-10-15 10:02:19 +08:00
suspend-imx6.S ARM: imx: add suspend/resume support for i.mx6ul 2015-09-17 08:54:35 +08:00
suspend-imx53.S ARM: imx53: Set DDR pins to high impedance when in suspend to RAM. 2015-06-03 14:49:36 +08:00
system.c ARM: imx: Do L2 errata only if the L2 cache isn't enabled 2016-02-28 15:55:26 +08:00
tzic.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
ulpi.h ARM: imx: Remove mxc specific ulpi access ops 2013-06-17 15:45:16 +08:00