40 lines
1.4 KiB
Plaintext
40 lines
1.4 KiB
Plaintext
What: /sys/bus/iio/devices/iio:deviceX/ac_excitation_en
|
|
KernelVersion:
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Reading gives the state of AC excitation.
|
|
Writing '1' enables AC excitation.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/bridge_switch_en
|
|
KernelVersion:
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
This bridge switch is used to disconnect it when there is a
|
|
need to minimize the system current consumption.
|
|
Reading gives the state of the bridge switch.
|
|
Writing '1' enables the bridge switch.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration
|
|
KernelVersion:
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Initiates the system calibration procedure. This is done on a
|
|
single channel at a time. Write '1' to start the calibration.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration_mode_available
|
|
KernelVersion:
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Reading returns a list with the possible calibration modes.
|
|
There are two available options:
|
|
"zero_scale" - calibrate to zero scale
|
|
"full_scale" - calibrate to full scale
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration_mode
|
|
KernelVersion:
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Sets up the calibration mode used in the system calibration
|
|
procedure. Reading returns the current calibration mode.
|
|
Writing sets the system calibration mode.
|