1504 lines
47 KiB
C
1504 lines
47 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Driver for CSR SiRFprimaII onboard UARTs.
|
|
*
|
|
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/init.h>
|
|
#include <linux/sysrq.h>
|
|
#include <linux/console.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/of.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/dma-direction.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include "sirfsoc_uart.h"
|
|
|
|
static unsigned int
|
|
sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count);
|
|
static unsigned int
|
|
sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count);
|
|
static struct uart_driver sirfsoc_uart_drv;
|
|
|
|
static void sirfsoc_uart_tx_dma_complete_callback(void *param);
|
|
static const struct sirfsoc_baudrate_to_regv baudrate_to_regv[] = {
|
|
{4000000, 2359296},
|
|
{3500000, 1310721},
|
|
{3000000, 1572865},
|
|
{2500000, 1245186},
|
|
{2000000, 1572866},
|
|
{1500000, 1245188},
|
|
{1152000, 1638404},
|
|
{1000000, 1572869},
|
|
{921600, 1114120},
|
|
{576000, 1245196},
|
|
{500000, 1245198},
|
|
{460800, 1572876},
|
|
{230400, 1310750},
|
|
{115200, 1310781},
|
|
{57600, 1310843},
|
|
{38400, 1114328},
|
|
{19200, 1114545},
|
|
{9600, 1114979},
|
|
};
|
|
|
|
static struct sirfsoc_uart_port *sirf_ports[SIRFSOC_UART_NR];
|
|
|
|
static inline struct sirfsoc_uart_port *to_sirfport(struct uart_port *port)
|
|
{
|
|
return container_of(port, struct sirfsoc_uart_port, port);
|
|
}
|
|
|
|
static inline unsigned int sirfsoc_uart_tx_empty(struct uart_port *port)
|
|
{
|
|
unsigned long reg;
|
|
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
|
|
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
|
|
struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
|
|
reg = rd_regl(port, ureg->sirfsoc_tx_fifo_status);
|
|
return (reg & ufifo_st->ff_empty(port)) ? TIOCSER_TEMT : 0;
|
|
}
|
|
|
|
static unsigned int sirfsoc_uart_get_mctrl(struct uart_port *port)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
|
|
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
|
|
if (!sirfport->hw_flow_ctrl || !sirfport->ms_enabled)
|
|
goto cts_asserted;
|
|
if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
|
|
if (!(rd_regl(port, ureg->sirfsoc_afc_ctrl) &
|
|
SIRFUART_AFC_CTS_STATUS))
|
|
goto cts_asserted;
|
|
else
|
|
goto cts_deasserted;
|
|
} else {
|
|
if (!gpio_get_value(sirfport->cts_gpio))
|
|
goto cts_asserted;
|
|
else
|
|
goto cts_deasserted;
|
|
}
|
|
cts_deasserted:
|
|
return TIOCM_CAR | TIOCM_DSR;
|
|
cts_asserted:
|
|
return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
|
|
}
|
|
|
|
static void sirfsoc_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
|
|
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
|
|
unsigned int assert = mctrl & TIOCM_RTS;
|
|
unsigned int val = assert ? SIRFUART_AFC_CTRL_RX_THD : 0x0;
|
|
unsigned int current_val;
|
|
|
|
if (mctrl & TIOCM_LOOP) {
|
|
if (sirfport->uart_reg->uart_type == SIRF_REAL_UART)
|
|
wr_regl(port, ureg->sirfsoc_line_ctrl,
|
|
rd_regl(port, ureg->sirfsoc_line_ctrl) |
|
|
SIRFUART_LOOP_BACK);
|
|
else
|
|
wr_regl(port, ureg->sirfsoc_mode1,
|
|
rd_regl(port, ureg->sirfsoc_mode1) |
|
|
SIRFSOC_USP_LOOP_BACK_CTRL);
|
|
} else {
|
|
if (sirfport->uart_reg->uart_type == SIRF_REAL_UART)
|
|
wr_regl(port, ureg->sirfsoc_line_ctrl,
|
|
rd_regl(port, ureg->sirfsoc_line_ctrl) &
|
|
~SIRFUART_LOOP_BACK);
|
|
else
|
|
wr_regl(port, ureg->sirfsoc_mode1,
|
|
rd_regl(port, ureg->sirfsoc_mode1) &
|
|
~SIRFSOC_USP_LOOP_BACK_CTRL);
|
|
}
|
|
|
|
if (!sirfport->hw_flow_ctrl || !sirfport->ms_enabled)
|
|
return;
|
|
if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
|
|
current_val = rd_regl(port, ureg->sirfsoc_afc_ctrl) & ~0xFF;
|
|
val |= current_val;
|
|
wr_regl(port, ureg->sirfsoc_afc_ctrl, val);
|
|
} else {
|
|
if (!val)
|
|
gpio_set_value(sirfport->rts_gpio, 1);
|
|
else
|
|
gpio_set_value(sirfport->rts_gpio, 0);
|
|
}
|
|
}
|
|
|
|
static void sirfsoc_uart_stop_tx(struct uart_port *port)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
|
|
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
|
|
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
|
|
|
|
if (sirfport->tx_dma_chan) {
|
|
if (sirfport->tx_dma_state == TX_DMA_RUNNING) {
|
|
dmaengine_pause(sirfport->tx_dma_chan);
|
|
sirfport->tx_dma_state = TX_DMA_PAUSE;
|
|
} else {
|
|
if (!sirfport->is_atlas7)
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
rd_regl(port, ureg->sirfsoc_int_en_reg) &
|
|
~uint_en->sirfsoc_txfifo_empty_en);
|
|
else
|
|
wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
|
|
uint_en->sirfsoc_txfifo_empty_en);
|
|
}
|
|
} else {
|
|
if (sirfport->uart_reg->uart_type == SIRF_USP_UART)
|
|
wr_regl(port, ureg->sirfsoc_tx_rx_en, rd_regl(port,
|
|
ureg->sirfsoc_tx_rx_en) & ~SIRFUART_TX_EN);
|
|
if (!sirfport->is_atlas7)
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
rd_regl(port, ureg->sirfsoc_int_en_reg) &
|
|
~uint_en->sirfsoc_txfifo_empty_en);
|
|
else
|
|
wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
|
|
uint_en->sirfsoc_txfifo_empty_en);
|
|
}
|
|
}
|
|
|
|
static void sirfsoc_uart_tx_with_dma(struct sirfsoc_uart_port *sirfport)
|
|
{
|
|
struct uart_port *port = &sirfport->port;
|
|
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
|
|
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
|
|
struct circ_buf *xmit = &port->state->xmit;
|
|
unsigned long tran_size;
|
|
unsigned long tran_start;
|
|
unsigned long pio_tx_size;
|
|
|
|
tran_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
|
|
tran_start = (unsigned long)(xmit->buf + xmit->tail);
|
|
if (uart_circ_empty(xmit) || uart_tx_stopped(port) ||
|
|
!tran_size)
|
|
return;
|
|
if (sirfport->tx_dma_state == TX_DMA_PAUSE) {
|
|
dmaengine_resume(sirfport->tx_dma_chan);
|
|
return;
|
|
}
|
|
if (sirfport->tx_dma_state == TX_DMA_RUNNING)
|
|
return;
|
|
if (!sirfport->is_atlas7)
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
rd_regl(port, ureg->sirfsoc_int_en_reg)&
|
|
~(uint_en->sirfsoc_txfifo_empty_en));
|
|
else
|
|
wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
|
|
uint_en->sirfsoc_txfifo_empty_en);
|
|
/*
|
|
* DMA requires buffer address and buffer length are both aligned with
|
|
* 4 bytes, so we use PIO for
|
|
* 1. if address is not aligned with 4bytes, use PIO for the first 1~3
|
|
* bytes, and move to DMA for the left part aligned with 4bytes
|
|
* 2. if buffer length is not aligned with 4bytes, use DMA for aligned
|
|
* part first, move to PIO for the left 1~3 bytes
|
|
*/
|
|
if (tran_size < 4 || BYTES_TO_ALIGN(tran_start)) {
|
|
wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP);
|
|
wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl,
|
|
rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl)|
|
|
SIRFUART_IO_MODE);
|
|
if (BYTES_TO_ALIGN(tran_start)) {
|
|
pio_tx_size = sirfsoc_uart_pio_tx_chars(sirfport,
|
|
BYTES_TO_ALIGN(tran_start));
|
|
tran_size -= pio_tx_size;
|
|
}
|
|
if (tran_size < 4)
|
|
sirfsoc_uart_pio_tx_chars(sirfport, tran_size);
|
|
if (!sirfport->is_atlas7)
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
rd_regl(port, ureg->sirfsoc_int_en_reg)|
|
|
uint_en->sirfsoc_txfifo_empty_en);
|
|
else
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
uint_en->sirfsoc_txfifo_empty_en);
|
|
wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START);
|
|
} else {
|
|
/* tx transfer mode switch into dma mode */
|
|
wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP);
|
|
wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl,
|
|
rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl)&
|
|
~SIRFUART_IO_MODE);
|
|
wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START);
|
|
tran_size &= ~(0x3);
|
|
|
|
sirfport->tx_dma_addr = dma_map_single(port->dev,
|
|
xmit->buf + xmit->tail,
|
|
tran_size, DMA_TO_DEVICE);
|
|
sirfport->tx_dma_desc = dmaengine_prep_slave_single(
|
|
sirfport->tx_dma_chan, sirfport->tx_dma_addr,
|
|
tran_size, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
|
|
if (!sirfport->tx_dma_desc) {
|
|
dev_err(port->dev, "DMA prep slave single fail\n");
|
|
return;
|
|
}
|
|
sirfport->tx_dma_desc->callback =
|
|
sirfsoc_uart_tx_dma_complete_callback;
|
|
sirfport->tx_dma_desc->callback_param = (void *)sirfport;
|
|
sirfport->transfer_size = tran_size;
|
|
|
|
dmaengine_submit(sirfport->tx_dma_desc);
|
|
dma_async_issue_pending(sirfport->tx_dma_chan);
|
|
sirfport->tx_dma_state = TX_DMA_RUNNING;
|
|
}
|
|
}
|
|
|
|
static void sirfsoc_uart_start_tx(struct uart_port *port)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
|
|
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
|
|
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
|
|
if (sirfport->tx_dma_chan)
|
|
sirfsoc_uart_tx_with_dma(sirfport);
|
|
else {
|
|
if (sirfport->uart_reg->uart_type == SIRF_USP_UART)
|
|
wr_regl(port, ureg->sirfsoc_tx_rx_en, rd_regl(port,
|
|
ureg->sirfsoc_tx_rx_en) | SIRFUART_TX_EN);
|
|
wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP);
|
|
sirfsoc_uart_pio_tx_chars(sirfport, port->fifosize);
|
|
wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START);
|
|
if (!sirfport->is_atlas7)
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
rd_regl(port, ureg->sirfsoc_int_en_reg)|
|
|
uint_en->sirfsoc_txfifo_empty_en);
|
|
else
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
uint_en->sirfsoc_txfifo_empty_en);
|
|
}
|
|
}
|
|
|
|
static void sirfsoc_uart_stop_rx(struct uart_port *port)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
|
|
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
|
|
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
|
|
|
|
wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
|
|
if (sirfport->rx_dma_chan) {
|
|
if (!sirfport->is_atlas7)
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
rd_regl(port, ureg->sirfsoc_int_en_reg) &
|
|
~(SIRFUART_RX_DMA_INT_EN(uint_en,
|
|
sirfport->uart_reg->uart_type) |
|
|
uint_en->sirfsoc_rx_done_en));
|
|
else
|
|
wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
|
|
SIRFUART_RX_DMA_INT_EN(uint_en,
|
|
sirfport->uart_reg->uart_type)|
|
|
uint_en->sirfsoc_rx_done_en);
|
|
dmaengine_terminate_all(sirfport->rx_dma_chan);
|
|
} else {
|
|
if (!sirfport->is_atlas7)
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
rd_regl(port, ureg->sirfsoc_int_en_reg)&
|
|
~(SIRFUART_RX_IO_INT_EN(uint_en,
|
|
sirfport->uart_reg->uart_type)));
|
|
else
|
|
wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
|
|
SIRFUART_RX_IO_INT_EN(uint_en,
|
|
sirfport->uart_reg->uart_type));
|
|
}
|
|
}
|
|
|
|
static void sirfsoc_uart_disable_ms(struct uart_port *port)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
|
|
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
|
|
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
|
|
|
|
if (!sirfport->hw_flow_ctrl)
|
|
return;
|
|
sirfport->ms_enabled = false;
|
|
if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
|
|
wr_regl(port, ureg->sirfsoc_afc_ctrl,
|
|
rd_regl(port, ureg->sirfsoc_afc_ctrl) & ~0x3FF);
|
|
if (!sirfport->is_atlas7)
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
rd_regl(port, ureg->sirfsoc_int_en_reg)&
|
|
~uint_en->sirfsoc_cts_en);
|
|
else
|
|
wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
|
|
uint_en->sirfsoc_cts_en);
|
|
} else
|
|
disable_irq(gpio_to_irq(sirfport->cts_gpio));
|
|
}
|
|
|
|
static irqreturn_t sirfsoc_uart_usp_cts_handler(int irq, void *dev_id)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)dev_id;
|
|
struct uart_port *port = &sirfport->port;
|
|
spin_lock(&port->lock);
|
|
if (gpio_is_valid(sirfport->cts_gpio) && sirfport->ms_enabled)
|
|
uart_handle_cts_change(port,
|
|
!gpio_get_value(sirfport->cts_gpio));
|
|
spin_unlock(&port->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void sirfsoc_uart_enable_ms(struct uart_port *port)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
|
|
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
|
|
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
|
|
|
|
if (!sirfport->hw_flow_ctrl)
|
|
return;
|
|
sirfport->ms_enabled = true;
|
|
if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
|
|
wr_regl(port, ureg->sirfsoc_afc_ctrl,
|
|
rd_regl(port, ureg->sirfsoc_afc_ctrl) |
|
|
SIRFUART_AFC_TX_EN | SIRFUART_AFC_RX_EN |
|
|
SIRFUART_AFC_CTRL_RX_THD);
|
|
if (!sirfport->is_atlas7)
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
rd_regl(port, ureg->sirfsoc_int_en_reg)
|
|
| uint_en->sirfsoc_cts_en);
|
|
else
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
uint_en->sirfsoc_cts_en);
|
|
} else
|
|
enable_irq(gpio_to_irq(sirfport->cts_gpio));
|
|
}
|
|
|
|
static void sirfsoc_uart_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
|
|
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
|
|
if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
|
|
unsigned long ulcon = rd_regl(port, ureg->sirfsoc_line_ctrl);
|
|
if (break_state)
|
|
ulcon |= SIRFUART_SET_BREAK;
|
|
else
|
|
ulcon &= ~SIRFUART_SET_BREAK;
|
|
wr_regl(port, ureg->sirfsoc_line_ctrl, ulcon);
|
|
}
|
|
}
|
|
|
|
static unsigned int
|
|
sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
|
|
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
|
|
struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
|
|
unsigned int ch, rx_count = 0;
|
|
struct tty_struct *tty;
|
|
tty = tty_port_tty_get(&port->state->port);
|
|
if (!tty)
|
|
return -ENODEV;
|
|
while (!(rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
|
|
ufifo_st->ff_empty(port))) {
|
|
ch = rd_regl(port, ureg->sirfsoc_rx_fifo_data) |
|
|
SIRFUART_DUMMY_READ;
|
|
if (unlikely(uart_handle_sysrq_char(port, ch)))
|
|
continue;
|
|
uart_insert_char(port, 0, 0, ch, TTY_NORMAL);
|
|
rx_count++;
|
|
if (rx_count >= max_rx_count)
|
|
break;
|
|
}
|
|
|
|
port->icount.rx += rx_count;
|
|
|
|
return rx_count;
|
|
}
|
|
|
|
static unsigned int
|
|
sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count)
|
|
{
|
|
struct uart_port *port = &sirfport->port;
|
|
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
|
|
struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
|
|
struct circ_buf *xmit = &port->state->xmit;
|
|
unsigned int num_tx = 0;
|
|
while (!uart_circ_empty(xmit) &&
|
|
!(rd_regl(port, ureg->sirfsoc_tx_fifo_status) &
|
|
ufifo_st->ff_full(port)) &&
|
|
count--) {
|
|
wr_regl(port, ureg->sirfsoc_tx_fifo_data,
|
|
xmit->buf[xmit->tail]);
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
port->icount.tx++;
|
|
num_tx++;
|
|
}
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(port);
|
|
return num_tx;
|
|
}
|
|
|
|
static void sirfsoc_uart_tx_dma_complete_callback(void *param)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param;
|
|
struct uart_port *port = &sirfport->port;
|
|
struct circ_buf *xmit = &port->state->xmit;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
xmit->tail = (xmit->tail + sirfport->transfer_size) &
|
|
(UART_XMIT_SIZE - 1);
|
|
port->icount.tx += sirfport->transfer_size;
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(port);
|
|
if (sirfport->tx_dma_addr)
|
|
dma_unmap_single(port->dev, sirfport->tx_dma_addr,
|
|
sirfport->transfer_size, DMA_TO_DEVICE);
|
|
sirfport->tx_dma_state = TX_DMA_IDLE;
|
|
sirfsoc_uart_tx_with_dma(sirfport);
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id)
|
|
{
|
|
unsigned long intr_status;
|
|
unsigned long cts_status;
|
|
unsigned long flag = TTY_NORMAL;
|
|
struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)dev_id;
|
|
struct uart_port *port = &sirfport->port;
|
|
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
|
|
struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
|
|
struct sirfsoc_int_status *uint_st = &sirfport->uart_reg->uart_int_st;
|
|
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
|
|
struct uart_state *state = port->state;
|
|
struct circ_buf *xmit = &port->state->xmit;
|
|
spin_lock(&port->lock);
|
|
intr_status = rd_regl(port, ureg->sirfsoc_int_st_reg);
|
|
wr_regl(port, ureg->sirfsoc_int_st_reg, intr_status);
|
|
intr_status &= rd_regl(port, ureg->sirfsoc_int_en_reg);
|
|
if (unlikely(intr_status & (SIRFUART_ERR_INT_STAT(uint_st,
|
|
sirfport->uart_reg->uart_type)))) {
|
|
if (intr_status & uint_st->sirfsoc_rxd_brk) {
|
|
port->icount.brk++;
|
|
if (uart_handle_break(port))
|
|
goto recv_char;
|
|
}
|
|
if (intr_status & uint_st->sirfsoc_rx_oflow) {
|
|
port->icount.overrun++;
|
|
flag = TTY_OVERRUN;
|
|
}
|
|
if (intr_status & uint_st->sirfsoc_frm_err) {
|
|
port->icount.frame++;
|
|
flag = TTY_FRAME;
|
|
}
|
|
if (intr_status & uint_st->sirfsoc_parity_err) {
|
|
port->icount.parity++;
|
|
flag = TTY_PARITY;
|
|
}
|
|
wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET);
|
|
wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
|
|
wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START);
|
|
intr_status &= port->read_status_mask;
|
|
uart_insert_char(port, intr_status,
|
|
uint_en->sirfsoc_rx_oflow_en, 0, flag);
|
|
}
|
|
recv_char:
|
|
if ((sirfport->uart_reg->uart_type == SIRF_REAL_UART) &&
|
|
(intr_status & SIRFUART_CTS_INT_ST(uint_st)) &&
|
|
!sirfport->tx_dma_state) {
|
|
cts_status = rd_regl(port, ureg->sirfsoc_afc_ctrl) &
|
|
SIRFUART_AFC_CTS_STATUS;
|
|
if (cts_status != 0)
|
|
cts_status = 0;
|
|
else
|
|
cts_status = 1;
|
|
uart_handle_cts_change(port, cts_status);
|
|
wake_up_interruptible(&state->port.delta_msr_wait);
|
|
}
|
|
if (!sirfport->rx_dma_chan &&
|
|
(intr_status & SIRFUART_RX_IO_INT_ST(uint_st))) {
|
|
/*
|
|
* chip will trigger continuous RX_TIMEOUT interrupt
|
|
* in RXFIFO empty and not trigger if RXFIFO recevice
|
|
* data in limit time, original method use RX_TIMEOUT
|
|
* will trigger lots of useless interrupt in RXFIFO
|
|
* empty.RXFIFO received one byte will trigger RX_DONE
|
|
* interrupt.use RX_DONE to wait for data received
|
|
* into RXFIFO, use RX_THD/RX_FULL for lots data receive
|
|
* and use RX_TIMEOUT for the last left data.
|
|
*/
|
|
if (intr_status & uint_st->sirfsoc_rx_done) {
|
|
if (!sirfport->is_atlas7) {
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
rd_regl(port, ureg->sirfsoc_int_en_reg)
|
|
& ~(uint_en->sirfsoc_rx_done_en));
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
rd_regl(port, ureg->sirfsoc_int_en_reg)
|
|
| (uint_en->sirfsoc_rx_timeout_en));
|
|
} else {
|
|
wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
|
|
uint_en->sirfsoc_rx_done_en);
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
uint_en->sirfsoc_rx_timeout_en);
|
|
}
|
|
} else {
|
|
if (intr_status & uint_st->sirfsoc_rx_timeout) {
|
|
if (!sirfport->is_atlas7) {
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
rd_regl(port, ureg->sirfsoc_int_en_reg)
|
|
& ~(uint_en->sirfsoc_rx_timeout_en));
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
rd_regl(port, ureg->sirfsoc_int_en_reg)
|
|
| (uint_en->sirfsoc_rx_done_en));
|
|
} else {
|
|
wr_regl(port,
|
|
ureg->sirfsoc_int_en_clr_reg,
|
|
uint_en->sirfsoc_rx_timeout_en);
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
uint_en->sirfsoc_rx_done_en);
|
|
}
|
|
}
|
|
sirfsoc_uart_pio_rx_chars(port, port->fifosize);
|
|
}
|
|
}
|
|
spin_unlock(&port->lock);
|
|
tty_flip_buffer_push(&state->port);
|
|
spin_lock(&port->lock);
|
|
if (intr_status & uint_st->sirfsoc_txfifo_empty) {
|
|
if (sirfport->tx_dma_chan)
|
|
sirfsoc_uart_tx_with_dma(sirfport);
|
|
else {
|
|
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
|
|
spin_unlock(&port->lock);
|
|
return IRQ_HANDLED;
|
|
} else {
|
|
sirfsoc_uart_pio_tx_chars(sirfport,
|
|
port->fifosize);
|
|
if ((uart_circ_empty(xmit)) &&
|
|
(rd_regl(port, ureg->sirfsoc_tx_fifo_status) &
|
|
ufifo_st->ff_empty(port)))
|
|
sirfsoc_uart_stop_tx(port);
|
|
}
|
|
}
|
|
}
|
|
spin_unlock(&port->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void sirfsoc_uart_rx_dma_complete_callback(void *param)
|
|
{
|
|
}
|
|
|
|
/* submit rx dma task into dmaengine */
|
|
static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
|
|
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
|
|
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
|
|
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
|
|
rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
|
|
~SIRFUART_IO_MODE);
|
|
sirfport->rx_dma_items.xmit.tail =
|
|
sirfport->rx_dma_items.xmit.head = 0;
|
|
sirfport->rx_dma_items.desc =
|
|
dmaengine_prep_dma_cyclic(sirfport->rx_dma_chan,
|
|
sirfport->rx_dma_items.dma_addr, SIRFSOC_RX_DMA_BUF_SIZE,
|
|
SIRFSOC_RX_DMA_BUF_SIZE / 2,
|
|
DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
|
|
if (IS_ERR_OR_NULL(sirfport->rx_dma_items.desc)) {
|
|
dev_err(port->dev, "DMA slave single fail\n");
|
|
return;
|
|
}
|
|
sirfport->rx_dma_items.desc->callback =
|
|
sirfsoc_uart_rx_dma_complete_callback;
|
|
sirfport->rx_dma_items.desc->callback_param = sirfport;
|
|
sirfport->rx_dma_items.cookie =
|
|
dmaengine_submit(sirfport->rx_dma_items.desc);
|
|
dma_async_issue_pending(sirfport->rx_dma_chan);
|
|
if (!sirfport->is_atlas7)
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
rd_regl(port, ureg->sirfsoc_int_en_reg) |
|
|
SIRFUART_RX_DMA_INT_EN(uint_en,
|
|
sirfport->uart_reg->uart_type));
|
|
else
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
SIRFUART_RX_DMA_INT_EN(uint_en,
|
|
sirfport->uart_reg->uart_type));
|
|
}
|
|
|
|
static unsigned int
|
|
sirfsoc_usp_calc_sample_div(unsigned long set_rate,
|
|
unsigned long ioclk_rate, unsigned long *sample_reg)
|
|
{
|
|
unsigned long min_delta = ~0UL;
|
|
unsigned short sample_div;
|
|
unsigned long ioclk_div = 0;
|
|
unsigned long temp_delta;
|
|
|
|
for (sample_div = SIRF_USP_MIN_SAMPLE_DIV;
|
|
sample_div <= SIRF_MAX_SAMPLE_DIV; sample_div++) {
|
|
temp_delta = ioclk_rate -
|
|
(ioclk_rate + (set_rate * sample_div) / 2)
|
|
/ (set_rate * sample_div) * set_rate * sample_div;
|
|
|
|
temp_delta = (temp_delta > 0) ? temp_delta : -temp_delta;
|
|
if (temp_delta < min_delta) {
|
|
ioclk_div = (2 * ioclk_rate /
|
|
(set_rate * sample_div) + 1) / 2 - 1;
|
|
if (ioclk_div > SIRF_IOCLK_DIV_MAX)
|
|
continue;
|
|
min_delta = temp_delta;
|
|
*sample_reg = sample_div;
|
|
if (!temp_delta)
|
|
break;
|
|
}
|
|
}
|
|
return ioclk_div;
|
|
}
|
|
|
|
static unsigned int
|
|
sirfsoc_uart_calc_sample_div(unsigned long baud_rate,
|
|
unsigned long ioclk_rate, unsigned long *set_baud)
|
|
{
|
|
unsigned long min_delta = ~0UL;
|
|
unsigned short sample_div;
|
|
unsigned int regv = 0;
|
|
unsigned long ioclk_div;
|
|
unsigned long baud_tmp;
|
|
int temp_delta;
|
|
|
|
for (sample_div = SIRF_MIN_SAMPLE_DIV;
|
|
sample_div <= SIRF_MAX_SAMPLE_DIV; sample_div++) {
|
|
ioclk_div = (ioclk_rate / (baud_rate * (sample_div + 1))) - 1;
|
|
if (ioclk_div > SIRF_IOCLK_DIV_MAX)
|
|
continue;
|
|
baud_tmp = ioclk_rate / ((ioclk_div + 1) * (sample_div + 1));
|
|
temp_delta = baud_tmp - baud_rate;
|
|
temp_delta = (temp_delta > 0) ? temp_delta : -temp_delta;
|
|
if (temp_delta < min_delta) {
|
|
regv = regv & (~SIRF_IOCLK_DIV_MASK);
|
|
regv = regv | ioclk_div;
|
|
regv = regv & (~SIRF_SAMPLE_DIV_MASK);
|
|
regv = regv | (sample_div << SIRF_SAMPLE_DIV_SHIFT);
|
|
min_delta = temp_delta;
|
|
*set_baud = baud_tmp;
|
|
}
|
|
}
|
|
return regv;
|
|
}
|
|
|
|
static void sirfsoc_uart_set_termios(struct uart_port *port,
|
|
struct ktermios *termios,
|
|
struct ktermios *old)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
|
|
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
|
|
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
|
|
unsigned long config_reg = 0;
|
|
unsigned long baud_rate;
|
|
unsigned long set_baud;
|
|
unsigned long flags;
|
|
unsigned long ic;
|
|
unsigned int clk_div_reg = 0;
|
|
unsigned long txfifo_op_reg, ioclk_rate;
|
|
unsigned long rx_time_out;
|
|
int threshold_div;
|
|
u32 data_bit_len, stop_bit_len, len_val;
|
|
unsigned long sample_div_reg = 0xf;
|
|
ioclk_rate = port->uartclk;
|
|
|
|
switch (termios->c_cflag & CSIZE) {
|
|
default:
|
|
case CS8:
|
|
data_bit_len = 8;
|
|
config_reg |= SIRFUART_DATA_BIT_LEN_8;
|
|
break;
|
|
case CS7:
|
|
data_bit_len = 7;
|
|
config_reg |= SIRFUART_DATA_BIT_LEN_7;
|
|
break;
|
|
case CS6:
|
|
data_bit_len = 6;
|
|
config_reg |= SIRFUART_DATA_BIT_LEN_6;
|
|
break;
|
|
case CS5:
|
|
data_bit_len = 5;
|
|
config_reg |= SIRFUART_DATA_BIT_LEN_5;
|
|
break;
|
|
}
|
|
if (termios->c_cflag & CSTOPB) {
|
|
config_reg |= SIRFUART_STOP_BIT_LEN_2;
|
|
stop_bit_len = 2;
|
|
} else
|
|
stop_bit_len = 1;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
port->read_status_mask = uint_en->sirfsoc_rx_oflow_en;
|
|
port->ignore_status_mask = 0;
|
|
if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
|
|
if (termios->c_iflag & INPCK)
|
|
port->read_status_mask |= uint_en->sirfsoc_frm_err_en |
|
|
uint_en->sirfsoc_parity_err_en;
|
|
} else {
|
|
if (termios->c_iflag & INPCK)
|
|
port->read_status_mask |= uint_en->sirfsoc_frm_err_en;
|
|
}
|
|
if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
|
|
port->read_status_mask |= uint_en->sirfsoc_rxd_brk_en;
|
|
if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
|
|
if (termios->c_iflag & IGNPAR)
|
|
port->ignore_status_mask |=
|
|
uint_en->sirfsoc_frm_err_en |
|
|
uint_en->sirfsoc_parity_err_en;
|
|
if (termios->c_cflag & PARENB) {
|
|
if (termios->c_cflag & CMSPAR) {
|
|
if (termios->c_cflag & PARODD)
|
|
config_reg |= SIRFUART_STICK_BIT_MARK;
|
|
else
|
|
config_reg |= SIRFUART_STICK_BIT_SPACE;
|
|
} else {
|
|
if (termios->c_cflag & PARODD)
|
|
config_reg |= SIRFUART_STICK_BIT_ODD;
|
|
else
|
|
config_reg |= SIRFUART_STICK_BIT_EVEN;
|
|
}
|
|
}
|
|
} else {
|
|
if (termios->c_iflag & IGNPAR)
|
|
port->ignore_status_mask |=
|
|
uint_en->sirfsoc_frm_err_en;
|
|
if (termios->c_cflag & PARENB)
|
|
dev_warn(port->dev,
|
|
"USP-UART not support parity err\n");
|
|
}
|
|
if (termios->c_iflag & IGNBRK) {
|
|
port->ignore_status_mask |=
|
|
uint_en->sirfsoc_rxd_brk_en;
|
|
if (termios->c_iflag & IGNPAR)
|
|
port->ignore_status_mask |=
|
|
uint_en->sirfsoc_rx_oflow_en;
|
|
}
|
|
if ((termios->c_cflag & CREAD) == 0)
|
|
port->ignore_status_mask |= SIRFUART_DUMMY_READ;
|
|
/* Hardware Flow Control Settings */
|
|
if (UART_ENABLE_MS(port, termios->c_cflag)) {
|
|
if (!sirfport->ms_enabled)
|
|
sirfsoc_uart_enable_ms(port);
|
|
} else {
|
|
if (sirfport->ms_enabled)
|
|
sirfsoc_uart_disable_ms(port);
|
|
}
|
|
baud_rate = uart_get_baud_rate(port, termios, old, 0, 4000000);
|
|
if (ioclk_rate == 150000000) {
|
|
for (ic = 0; ic < SIRF_BAUD_RATE_SUPPORT_NR; ic++)
|
|
if (baud_rate == baudrate_to_regv[ic].baud_rate)
|
|
clk_div_reg = baudrate_to_regv[ic].reg_val;
|
|
}
|
|
set_baud = baud_rate;
|
|
if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
|
|
if (unlikely(clk_div_reg == 0))
|
|
clk_div_reg = sirfsoc_uart_calc_sample_div(baud_rate,
|
|
ioclk_rate, &set_baud);
|
|
wr_regl(port, ureg->sirfsoc_divisor, clk_div_reg);
|
|
} else {
|
|
clk_div_reg = sirfsoc_usp_calc_sample_div(baud_rate,
|
|
ioclk_rate, &sample_div_reg);
|
|
sample_div_reg--;
|
|
set_baud = ((ioclk_rate / (clk_div_reg+1) - 1) /
|
|
(sample_div_reg + 1));
|
|
/* setting usp mode 2 */
|
|
len_val = ((1 << SIRFSOC_USP_MODE2_RXD_DELAY_OFFSET) |
|
|
(1 << SIRFSOC_USP_MODE2_TXD_DELAY_OFFSET));
|
|
len_val |= ((clk_div_reg & SIRFSOC_USP_MODE2_CLK_DIVISOR_MASK)
|
|
<< SIRFSOC_USP_MODE2_CLK_DIVISOR_OFFSET);
|
|
wr_regl(port, ureg->sirfsoc_mode2, len_val);
|
|
}
|
|
if (tty_termios_baud_rate(termios))
|
|
tty_termios_encode_baud_rate(termios, set_baud, set_baud);
|
|
/* set receive timeout && data bits len */
|
|
rx_time_out = SIRFSOC_UART_RX_TIMEOUT(set_baud, 20000);
|
|
rx_time_out = SIRFUART_RECV_TIMEOUT_VALUE(rx_time_out);
|
|
txfifo_op_reg = rd_regl(port, ureg->sirfsoc_tx_fifo_op);
|
|
wr_regl(port, ureg->sirfsoc_tx_fifo_op,
|
|
(txfifo_op_reg & ~SIRFUART_FIFO_START));
|
|
if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
|
|
config_reg |= SIRFUART_UART_RECV_TIMEOUT(rx_time_out);
|
|
wr_regl(port, ureg->sirfsoc_line_ctrl, config_reg);
|
|
} else {
|
|
/*tx frame ctrl*/
|
|
len_val = (data_bit_len - 1) << SIRFSOC_USP_TX_DATA_LEN_OFFSET;
|
|
len_val |= (data_bit_len + 1 + stop_bit_len - 1) <<
|
|
SIRFSOC_USP_TX_FRAME_LEN_OFFSET;
|
|
len_val |= ((data_bit_len - 1) <<
|
|
SIRFSOC_USP_TX_SHIFTER_LEN_OFFSET);
|
|
len_val |= (((clk_div_reg & 0xc00) >> 10) <<
|
|
SIRFSOC_USP_TX_CLK_DIVISOR_OFFSET);
|
|
wr_regl(port, ureg->sirfsoc_tx_frame_ctrl, len_val);
|
|
/*rx frame ctrl*/
|
|
len_val = (data_bit_len - 1) << SIRFSOC_USP_RX_DATA_LEN_OFFSET;
|
|
len_val |= (data_bit_len + 1 + stop_bit_len - 1) <<
|
|
SIRFSOC_USP_RX_FRAME_LEN_OFFSET;
|
|
len_val |= (data_bit_len - 1) <<
|
|
SIRFSOC_USP_RX_SHIFTER_LEN_OFFSET;
|
|
len_val |= (((clk_div_reg & 0xf000) >> 12) <<
|
|
SIRFSOC_USP_RX_CLK_DIVISOR_OFFSET);
|
|
wr_regl(port, ureg->sirfsoc_rx_frame_ctrl, len_val);
|
|
/*async param*/
|
|
wr_regl(port, ureg->sirfsoc_async_param_reg,
|
|
(SIRFUART_USP_RECV_TIMEOUT(rx_time_out)) |
|
|
(sample_div_reg & SIRFSOC_USP_ASYNC_DIV2_MASK) <<
|
|
SIRFSOC_USP_ASYNC_DIV2_OFFSET);
|
|
}
|
|
if (sirfport->tx_dma_chan)
|
|
wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_DMA_MODE);
|
|
else
|
|
wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_IO_MODE);
|
|
if (sirfport->rx_dma_chan)
|
|
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
|
|
rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
|
|
~SIRFUART_IO_MODE);
|
|
else
|
|
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
|
|
rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
|
|
SIRFUART_IO_MODE);
|
|
sirfport->rx_period_time = 20000000;
|
|
/* Reset Rx/Tx FIFO Threshold level for proper baudrate */
|
|
if (set_baud < 1000000)
|
|
threshold_div = 1;
|
|
else
|
|
threshold_div = 2;
|
|
wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl,
|
|
SIRFUART_FIFO_THD(port) / threshold_div);
|
|
wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl,
|
|
SIRFUART_FIFO_THD(port) / threshold_div);
|
|
txfifo_op_reg |= SIRFUART_FIFO_START;
|
|
wr_regl(port, ureg->sirfsoc_tx_fifo_op, txfifo_op_reg);
|
|
uart_update_timeout(port, termios->c_cflag, set_baud);
|
|
wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_TX_EN | SIRFUART_RX_EN);
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
static void sirfsoc_uart_pm(struct uart_port *port, unsigned int state,
|
|
unsigned int oldstate)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
|
|
if (!state)
|
|
clk_prepare_enable(sirfport->clk);
|
|
else
|
|
clk_disable_unprepare(sirfport->clk);
|
|
}
|
|
|
|
static int sirfsoc_uart_startup(struct uart_port *port)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
|
|
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
|
|
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
|
|
unsigned int index = port->line;
|
|
int ret;
|
|
irq_modify_status(port->irq, IRQ_NOREQUEST, IRQ_NOAUTOEN);
|
|
ret = request_irq(port->irq,
|
|
sirfsoc_uart_isr,
|
|
0,
|
|
SIRFUART_PORT_NAME,
|
|
sirfport);
|
|
if (ret != 0) {
|
|
dev_err(port->dev, "UART%d request IRQ line (%d) failed.\n",
|
|
index, port->irq);
|
|
goto irq_err;
|
|
}
|
|
/* initial hardware settings */
|
|
wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl,
|
|
rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl) |
|
|
SIRFUART_IO_MODE);
|
|
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
|
|
rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
|
|
SIRFUART_IO_MODE);
|
|
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
|
|
rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
|
|
~SIRFUART_RX_DMA_FLUSH);
|
|
wr_regl(port, ureg->sirfsoc_tx_dma_io_len, 0);
|
|
wr_regl(port, ureg->sirfsoc_rx_dma_io_len, 0);
|
|
wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_RX_EN | SIRFUART_TX_EN);
|
|
if (sirfport->uart_reg->uart_type == SIRF_USP_UART)
|
|
wr_regl(port, ureg->sirfsoc_mode1,
|
|
SIRFSOC_USP_ENDIAN_CTRL_LSBF |
|
|
SIRFSOC_USP_EN);
|
|
wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_RESET);
|
|
wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET);
|
|
wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
|
|
wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, SIRFUART_FIFO_THD(port));
|
|
wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, SIRFUART_FIFO_THD(port));
|
|
if (sirfport->rx_dma_chan)
|
|
wr_regl(port, ureg->sirfsoc_rx_fifo_level_chk,
|
|
SIRFUART_RX_FIFO_CHK_SC(port->line, 0x1) |
|
|
SIRFUART_RX_FIFO_CHK_LC(port->line, 0x2) |
|
|
SIRFUART_RX_FIFO_CHK_HC(port->line, 0x4));
|
|
if (sirfport->tx_dma_chan) {
|
|
sirfport->tx_dma_state = TX_DMA_IDLE;
|
|
wr_regl(port, ureg->sirfsoc_tx_fifo_level_chk,
|
|
SIRFUART_TX_FIFO_CHK_SC(port->line, 0x1b) |
|
|
SIRFUART_TX_FIFO_CHK_LC(port->line, 0xe) |
|
|
SIRFUART_TX_FIFO_CHK_HC(port->line, 0x4));
|
|
}
|
|
sirfport->ms_enabled = false;
|
|
if (sirfport->uart_reg->uart_type == SIRF_USP_UART &&
|
|
sirfport->hw_flow_ctrl) {
|
|
irq_modify_status(gpio_to_irq(sirfport->cts_gpio),
|
|
IRQ_NOREQUEST, IRQ_NOAUTOEN);
|
|
ret = request_irq(gpio_to_irq(sirfport->cts_gpio),
|
|
sirfsoc_uart_usp_cts_handler, IRQF_TRIGGER_FALLING |
|
|
IRQF_TRIGGER_RISING, "usp_cts_irq", sirfport);
|
|
if (ret != 0) {
|
|
dev_err(port->dev, "UART-USP:request gpio irq fail\n");
|
|
goto init_rx_err;
|
|
}
|
|
}
|
|
if (sirfport->uart_reg->uart_type == SIRF_REAL_UART &&
|
|
sirfport->rx_dma_chan)
|
|
wr_regl(port, ureg->sirfsoc_swh_dma_io,
|
|
SIRFUART_CLEAR_RX_ADDR_EN);
|
|
if (sirfport->uart_reg->uart_type == SIRF_USP_UART &&
|
|
sirfport->rx_dma_chan)
|
|
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
|
|
rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
|
|
SIRFSOC_USP_FRADDR_CLR_EN);
|
|
if (sirfport->rx_dma_chan && !sirfport->is_hrt_enabled) {
|
|
sirfport->is_hrt_enabled = true;
|
|
sirfport->rx_period_time = 20000000;
|
|
sirfport->rx_last_pos = -1;
|
|
sirfport->pio_fetch_cnt = 0;
|
|
sirfport->rx_dma_items.xmit.tail =
|
|
sirfport->rx_dma_items.xmit.head = 0;
|
|
hrtimer_start(&sirfport->hrt,
|
|
ns_to_ktime(sirfport->rx_period_time),
|
|
HRTIMER_MODE_REL);
|
|
}
|
|
wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START);
|
|
if (sirfport->rx_dma_chan)
|
|
sirfsoc_uart_start_next_rx_dma(port);
|
|
else {
|
|
if (!sirfport->is_atlas7)
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
rd_regl(port, ureg->sirfsoc_int_en_reg) |
|
|
SIRFUART_RX_IO_INT_EN(uint_en,
|
|
sirfport->uart_reg->uart_type));
|
|
else
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg,
|
|
SIRFUART_RX_IO_INT_EN(uint_en,
|
|
sirfport->uart_reg->uart_type));
|
|
}
|
|
enable_irq(port->irq);
|
|
|
|
return 0;
|
|
init_rx_err:
|
|
free_irq(port->irq, sirfport);
|
|
irq_err:
|
|
return ret;
|
|
}
|
|
|
|
static void sirfsoc_uart_shutdown(struct uart_port *port)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
|
|
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
|
|
struct circ_buf *xmit;
|
|
|
|
xmit = &sirfport->rx_dma_items.xmit;
|
|
if (!sirfport->is_atlas7)
|
|
wr_regl(port, ureg->sirfsoc_int_en_reg, 0);
|
|
else
|
|
wr_regl(port, ureg->sirfsoc_int_en_clr_reg, ~0UL);
|
|
|
|
free_irq(port->irq, sirfport);
|
|
if (sirfport->ms_enabled)
|
|
sirfsoc_uart_disable_ms(port);
|
|
if (sirfport->uart_reg->uart_type == SIRF_USP_UART &&
|
|
sirfport->hw_flow_ctrl) {
|
|
gpio_set_value(sirfport->rts_gpio, 1);
|
|
free_irq(gpio_to_irq(sirfport->cts_gpio), sirfport);
|
|
}
|
|
if (sirfport->tx_dma_chan)
|
|
sirfport->tx_dma_state = TX_DMA_IDLE;
|
|
if (sirfport->rx_dma_chan && sirfport->is_hrt_enabled) {
|
|
while (((rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
|
|
SIRFUART_RX_FIFO_MASK) > sirfport->pio_fetch_cnt) &&
|
|
!CIRC_CNT(xmit->head, xmit->tail,
|
|
SIRFSOC_RX_DMA_BUF_SIZE))
|
|
;
|
|
sirfport->is_hrt_enabled = false;
|
|
hrtimer_cancel(&sirfport->hrt);
|
|
}
|
|
}
|
|
|
|
static const char *sirfsoc_uart_type(struct uart_port *port)
|
|
{
|
|
return port->type == SIRFSOC_PORT_TYPE ? SIRFUART_PORT_NAME : NULL;
|
|
}
|
|
|
|
static int sirfsoc_uart_request_port(struct uart_port *port)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
|
|
struct sirfsoc_uart_param *uart_param = &sirfport->uart_reg->uart_param;
|
|
void *ret;
|
|
ret = request_mem_region(port->mapbase,
|
|
SIRFUART_MAP_SIZE, uart_param->port_name);
|
|
return ret ? 0 : -EBUSY;
|
|
}
|
|
|
|
static void sirfsoc_uart_release_port(struct uart_port *port)
|
|
{
|
|
release_mem_region(port->mapbase, SIRFUART_MAP_SIZE);
|
|
}
|
|
|
|
static void sirfsoc_uart_config_port(struct uart_port *port, int flags)
|
|
{
|
|
if (flags & UART_CONFIG_TYPE) {
|
|
port->type = SIRFSOC_PORT_TYPE;
|
|
sirfsoc_uart_request_port(port);
|
|
}
|
|
}
|
|
|
|
static const struct uart_ops sirfsoc_uart_ops = {
|
|
.tx_empty = sirfsoc_uart_tx_empty,
|
|
.get_mctrl = sirfsoc_uart_get_mctrl,
|
|
.set_mctrl = sirfsoc_uart_set_mctrl,
|
|
.stop_tx = sirfsoc_uart_stop_tx,
|
|
.start_tx = sirfsoc_uart_start_tx,
|
|
.stop_rx = sirfsoc_uart_stop_rx,
|
|
.enable_ms = sirfsoc_uart_enable_ms,
|
|
.break_ctl = sirfsoc_uart_break_ctl,
|
|
.startup = sirfsoc_uart_startup,
|
|
.shutdown = sirfsoc_uart_shutdown,
|
|
.set_termios = sirfsoc_uart_set_termios,
|
|
.pm = sirfsoc_uart_pm,
|
|
.type = sirfsoc_uart_type,
|
|
.release_port = sirfsoc_uart_release_port,
|
|
.request_port = sirfsoc_uart_request_port,
|
|
.config_port = sirfsoc_uart_config_port,
|
|
};
|
|
|
|
#ifdef CONFIG_SERIAL_SIRFSOC_CONSOLE
|
|
static int __init
|
|
sirfsoc_uart_console_setup(struct console *co, char *options)
|
|
{
|
|
unsigned int baud = 115200;
|
|
unsigned int bits = 8;
|
|
unsigned int parity = 'n';
|
|
unsigned int flow = 'n';
|
|
struct sirfsoc_uart_port *sirfport;
|
|
struct sirfsoc_register *ureg;
|
|
if (co->index < 0 || co->index >= SIRFSOC_UART_NR)
|
|
co->index = 1;
|
|
sirfport = sirf_ports[co->index];
|
|
if (!sirfport)
|
|
return -ENODEV;
|
|
ureg = &sirfport->uart_reg->uart_reg;
|
|
if (!sirfport->port.mapbase)
|
|
return -ENODEV;
|
|
|
|
/* enable usp in mode1 register */
|
|
if (sirfport->uart_reg->uart_type == SIRF_USP_UART)
|
|
wr_regl(&sirfport->port, ureg->sirfsoc_mode1, SIRFSOC_USP_EN |
|
|
SIRFSOC_USP_ENDIAN_CTRL_LSBF);
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
sirfport->port.cons = co;
|
|
|
|
/* default console tx/rx transfer using io mode */
|
|
sirfport->rx_dma_chan = NULL;
|
|
sirfport->tx_dma_chan = NULL;
|
|
return uart_set_options(&sirfport->port, co, baud, parity, bits, flow);
|
|
}
|
|
|
|
static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
|
|
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
|
|
struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
|
|
while (rd_regl(port, ureg->sirfsoc_tx_fifo_status) &
|
|
ufifo_st->ff_full(port))
|
|
cpu_relax();
|
|
wr_regl(port, ureg->sirfsoc_tx_fifo_data, ch);
|
|
}
|
|
|
|
static void sirfsoc_uart_console_write(struct console *co, const char *s,
|
|
unsigned int count)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = sirf_ports[co->index];
|
|
|
|
uart_console_write(&sirfport->port, s, count,
|
|
sirfsoc_uart_console_putchar);
|
|
}
|
|
|
|
static struct console sirfsoc_uart_console = {
|
|
.name = SIRFSOC_UART_NAME,
|
|
.device = uart_console_device,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
.write = sirfsoc_uart_console_write,
|
|
.setup = sirfsoc_uart_console_setup,
|
|
.data = &sirfsoc_uart_drv,
|
|
};
|
|
|
|
static int __init sirfsoc_uart_console_init(void)
|
|
{
|
|
register_console(&sirfsoc_uart_console);
|
|
return 0;
|
|
}
|
|
console_initcall(sirfsoc_uart_console_init);
|
|
#endif
|
|
|
|
static struct uart_driver sirfsoc_uart_drv = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = SIRFUART_PORT_NAME,
|
|
.nr = SIRFSOC_UART_NR,
|
|
.dev_name = SIRFSOC_UART_NAME,
|
|
.major = SIRFSOC_UART_MAJOR,
|
|
.minor = SIRFSOC_UART_MINOR,
|
|
#ifdef CONFIG_SERIAL_SIRFSOC_CONSOLE
|
|
.cons = &sirfsoc_uart_console,
|
|
#else
|
|
.cons = NULL,
|
|
#endif
|
|
};
|
|
|
|
static enum hrtimer_restart
|
|
sirfsoc_uart_rx_dma_hrtimer_callback(struct hrtimer *hrt)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport;
|
|
struct uart_port *port;
|
|
int count, inserted;
|
|
struct dma_tx_state tx_state;
|
|
struct tty_struct *tty;
|
|
struct sirfsoc_register *ureg;
|
|
struct circ_buf *xmit;
|
|
struct sirfsoc_fifo_status *ufifo_st;
|
|
int max_pio_cnt;
|
|
|
|
sirfport = container_of(hrt, struct sirfsoc_uart_port, hrt);
|
|
port = &sirfport->port;
|
|
inserted = 0;
|
|
tty = port->state->port.tty;
|
|
ureg = &sirfport->uart_reg->uart_reg;
|
|
xmit = &sirfport->rx_dma_items.xmit;
|
|
ufifo_st = &sirfport->uart_reg->fifo_status;
|
|
|
|
dmaengine_tx_status(sirfport->rx_dma_chan,
|
|
sirfport->rx_dma_items.cookie, &tx_state);
|
|
if (SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue !=
|
|
sirfport->rx_last_pos) {
|
|
xmit->head = SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue;
|
|
sirfport->rx_last_pos = xmit->head;
|
|
sirfport->pio_fetch_cnt = 0;
|
|
}
|
|
count = CIRC_CNT_TO_END(xmit->head, xmit->tail,
|
|
SIRFSOC_RX_DMA_BUF_SIZE);
|
|
while (count > 0) {
|
|
inserted = tty_insert_flip_string(tty->port,
|
|
(const unsigned char *)&xmit->buf[xmit->tail], count);
|
|
if (!inserted)
|
|
goto next_hrt;
|
|
port->icount.rx += inserted;
|
|
xmit->tail = (xmit->tail + inserted) &
|
|
(SIRFSOC_RX_DMA_BUF_SIZE - 1);
|
|
count = CIRC_CNT_TO_END(xmit->head, xmit->tail,
|
|
SIRFSOC_RX_DMA_BUF_SIZE);
|
|
tty_flip_buffer_push(tty->port);
|
|
}
|
|
/*
|
|
* if RX DMA buffer data have all push into tty buffer, and there is
|
|
* only little data(less than a dma transfer unit) left in rxfifo,
|
|
* fetch it out in pio mode and switch back to dma immediately
|
|
*/
|
|
if (!inserted && !count &&
|
|
((rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
|
|
SIRFUART_RX_FIFO_MASK) > sirfport->pio_fetch_cnt)) {
|
|
dmaengine_pause(sirfport->rx_dma_chan);
|
|
/* switch to pio mode */
|
|
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
|
|
rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
|
|
SIRFUART_IO_MODE);
|
|
/*
|
|
* UART controller SWH_DMA_IO register have CLEAR_RX_ADDR_EN
|
|
* When found changing I/O to DMA mode, it clears
|
|
* two low bits of read point;
|
|
* USP have similar FRADDR_CLR_EN bit in USP_RX_DMA_IO_CTRL.
|
|
* Fetch data out from rxfifo into DMA buffer in PIO mode,
|
|
* while switch back to DMA mode, the data fetched will override
|
|
* by DMA, as hardware have a strange behaviour:
|
|
* after switch back to DMA mode, check rxfifo status it will
|
|
* be the number PIO fetched, so record the fetched data count
|
|
* to avoid the repeated fetch
|
|
*/
|
|
max_pio_cnt = 3;
|
|
while (!(rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
|
|
ufifo_st->ff_empty(port)) && max_pio_cnt--) {
|
|
xmit->buf[xmit->head] =
|
|
rd_regl(port, ureg->sirfsoc_rx_fifo_data);
|
|
xmit->head = (xmit->head + 1) &
|
|
(SIRFSOC_RX_DMA_BUF_SIZE - 1);
|
|
sirfport->pio_fetch_cnt++;
|
|
}
|
|
/* switch back to dma mode */
|
|
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
|
|
rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
|
|
~SIRFUART_IO_MODE);
|
|
dmaengine_resume(sirfport->rx_dma_chan);
|
|
}
|
|
next_hrt:
|
|
hrtimer_forward_now(hrt, ns_to_ktime(sirfport->rx_period_time));
|
|
return HRTIMER_RESTART;
|
|
}
|
|
|
|
static const struct of_device_id sirfsoc_uart_ids[] = {
|
|
{ .compatible = "sirf,prima2-uart", .data = &sirfsoc_uart,},
|
|
{ .compatible = "sirf,atlas7-uart", .data = &sirfsoc_uart},
|
|
{ .compatible = "sirf,prima2-usp-uart", .data = &sirfsoc_usp},
|
|
{ .compatible = "sirf,atlas7-usp-uart", .data = &sirfsoc_usp},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sirfsoc_uart_ids);
|
|
|
|
static int sirfsoc_uart_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct sirfsoc_uart_port *sirfport;
|
|
struct uart_port *port;
|
|
struct resource *res;
|
|
int ret;
|
|
struct dma_slave_config slv_cfg = {
|
|
.src_maxburst = 1,
|
|
};
|
|
struct dma_slave_config tx_slv_cfg = {
|
|
.dst_maxburst = 2,
|
|
};
|
|
const struct of_device_id *match;
|
|
|
|
match = of_match_node(sirfsoc_uart_ids, np);
|
|
sirfport = devm_kzalloc(&pdev->dev, sizeof(*sirfport), GFP_KERNEL);
|
|
if (!sirfport) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
sirfport->port.line = of_alias_get_id(np, "serial");
|
|
if (sirfport->port.line >= ARRAY_SIZE(sirf_ports)) {
|
|
dev_err(&pdev->dev, "serial%d out of range\n",
|
|
sirfport->port.line);
|
|
return -EINVAL;
|
|
}
|
|
sirf_ports[sirfport->port.line] = sirfport;
|
|
sirfport->port.iotype = UPIO_MEM;
|
|
sirfport->port.flags = UPF_BOOT_AUTOCONF;
|
|
port = &sirfport->port;
|
|
port->dev = &pdev->dev;
|
|
port->private_data = sirfport;
|
|
sirfport->uart_reg = (struct sirfsoc_uart_register *)match->data;
|
|
|
|
sirfport->hw_flow_ctrl =
|
|
of_property_read_bool(np, "uart-has-rtscts") ||
|
|
of_property_read_bool(np, "sirf,uart-has-rtscts") /* deprecated */;
|
|
if (of_device_is_compatible(np, "sirf,prima2-uart") ||
|
|
of_device_is_compatible(np, "sirf,atlas7-uart"))
|
|
sirfport->uart_reg->uart_type = SIRF_REAL_UART;
|
|
if (of_device_is_compatible(np, "sirf,prima2-usp-uart") ||
|
|
of_device_is_compatible(np, "sirf,atlas7-usp-uart")) {
|
|
sirfport->uart_reg->uart_type = SIRF_USP_UART;
|
|
if (!sirfport->hw_flow_ctrl)
|
|
goto usp_no_flow_control;
|
|
if (of_find_property(np, "cts-gpios", NULL))
|
|
sirfport->cts_gpio =
|
|
of_get_named_gpio(np, "cts-gpios", 0);
|
|
else
|
|
sirfport->cts_gpio = -1;
|
|
if (of_find_property(np, "rts-gpios", NULL))
|
|
sirfport->rts_gpio =
|
|
of_get_named_gpio(np, "rts-gpios", 0);
|
|
else
|
|
sirfport->rts_gpio = -1;
|
|
|
|
if ((!gpio_is_valid(sirfport->cts_gpio) ||
|
|
!gpio_is_valid(sirfport->rts_gpio))) {
|
|
ret = -EINVAL;
|
|
dev_err(&pdev->dev,
|
|
"Usp flow control must have cts and rts gpio");
|
|
goto err;
|
|
}
|
|
ret = devm_gpio_request(&pdev->dev, sirfport->cts_gpio,
|
|
"usp-cts-gpio");
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Unable request cts gpio");
|
|
goto err;
|
|
}
|
|
gpio_direction_input(sirfport->cts_gpio);
|
|
ret = devm_gpio_request(&pdev->dev, sirfport->rts_gpio,
|
|
"usp-rts-gpio");
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Unable request rts gpio");
|
|
goto err;
|
|
}
|
|
gpio_direction_output(sirfport->rts_gpio, 1);
|
|
}
|
|
usp_no_flow_control:
|
|
if (of_device_is_compatible(np, "sirf,atlas7-uart") ||
|
|
of_device_is_compatible(np, "sirf,atlas7-usp-uart"))
|
|
sirfport->is_atlas7 = true;
|
|
|
|
if (of_property_read_u32(np, "fifosize", &port->fifosize)) {
|
|
dev_err(&pdev->dev,
|
|
"Unable to find fifosize in uart node.\n");
|
|
ret = -EFAULT;
|
|
goto err;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (res == NULL) {
|
|
dev_err(&pdev->dev, "Insufficient resources.\n");
|
|
ret = -EFAULT;
|
|
goto err;
|
|
}
|
|
port->mapbase = res->start;
|
|
port->membase = devm_ioremap(&pdev->dev,
|
|
res->start, resource_size(res));
|
|
if (!port->membase) {
|
|
dev_err(&pdev->dev, "Cannot remap resource.\n");
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
if (res == NULL) {
|
|
dev_err(&pdev->dev, "Insufficient resources.\n");
|
|
ret = -EFAULT;
|
|
goto err;
|
|
}
|
|
port->irq = res->start;
|
|
|
|
sirfport->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(sirfport->clk)) {
|
|
ret = PTR_ERR(sirfport->clk);
|
|
goto err;
|
|
}
|
|
port->uartclk = clk_get_rate(sirfport->clk);
|
|
|
|
port->ops = &sirfsoc_uart_ops;
|
|
spin_lock_init(&port->lock);
|
|
|
|
platform_set_drvdata(pdev, sirfport);
|
|
ret = uart_add_one_port(&sirfsoc_uart_drv, port);
|
|
if (ret != 0) {
|
|
dev_err(&pdev->dev, "Cannot add UART port(%d).\n", pdev->id);
|
|
goto err;
|
|
}
|
|
|
|
sirfport->rx_dma_chan = dma_request_slave_channel(port->dev, "rx");
|
|
sirfport->rx_dma_items.xmit.buf =
|
|
dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
|
|
&sirfport->rx_dma_items.dma_addr, GFP_KERNEL);
|
|
if (!sirfport->rx_dma_items.xmit.buf) {
|
|
dev_err(port->dev, "Uart alloc bufa failed\n");
|
|
ret = -ENOMEM;
|
|
goto alloc_coherent_err;
|
|
}
|
|
sirfport->rx_dma_items.xmit.head =
|
|
sirfport->rx_dma_items.xmit.tail = 0;
|
|
if (sirfport->rx_dma_chan)
|
|
dmaengine_slave_config(sirfport->rx_dma_chan, &slv_cfg);
|
|
sirfport->tx_dma_chan = dma_request_slave_channel(port->dev, "tx");
|
|
if (sirfport->tx_dma_chan)
|
|
dmaengine_slave_config(sirfport->tx_dma_chan, &tx_slv_cfg);
|
|
if (sirfport->rx_dma_chan) {
|
|
hrtimer_init(&sirfport->hrt, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
|
|
sirfport->hrt.function = sirfsoc_uart_rx_dma_hrtimer_callback;
|
|
sirfport->is_hrt_enabled = false;
|
|
}
|
|
|
|
return 0;
|
|
alloc_coherent_err:
|
|
dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
|
|
sirfport->rx_dma_items.xmit.buf,
|
|
sirfport->rx_dma_items.dma_addr);
|
|
dma_release_channel(sirfport->rx_dma_chan);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int sirfsoc_uart_remove(struct platform_device *pdev)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev);
|
|
struct uart_port *port = &sirfport->port;
|
|
uart_remove_one_port(&sirfsoc_uart_drv, port);
|
|
if (sirfport->rx_dma_chan) {
|
|
dmaengine_terminate_all(sirfport->rx_dma_chan);
|
|
dma_release_channel(sirfport->rx_dma_chan);
|
|
dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
|
|
sirfport->rx_dma_items.xmit.buf,
|
|
sirfport->rx_dma_items.dma_addr);
|
|
}
|
|
if (sirfport->tx_dma_chan) {
|
|
dmaengine_terminate_all(sirfport->tx_dma_chan);
|
|
dma_release_channel(sirfport->tx_dma_chan);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int
|
|
sirfsoc_uart_suspend(struct device *pdev)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = dev_get_drvdata(pdev);
|
|
struct uart_port *port = &sirfport->port;
|
|
uart_suspend_port(&sirfsoc_uart_drv, port);
|
|
return 0;
|
|
}
|
|
|
|
static int sirfsoc_uart_resume(struct device *pdev)
|
|
{
|
|
struct sirfsoc_uart_port *sirfport = dev_get_drvdata(pdev);
|
|
struct uart_port *port = &sirfport->port;
|
|
uart_resume_port(&sirfsoc_uart_drv, port);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops sirfsoc_uart_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(sirfsoc_uart_suspend, sirfsoc_uart_resume)
|
|
};
|
|
|
|
static struct platform_driver sirfsoc_uart_driver = {
|
|
.probe = sirfsoc_uart_probe,
|
|
.remove = sirfsoc_uart_remove,
|
|
.driver = {
|
|
.name = SIRFUART_PORT_NAME,
|
|
.of_match_table = sirfsoc_uart_ids,
|
|
.pm = &sirfsoc_uart_pm_ops,
|
|
},
|
|
};
|
|
|
|
static int __init sirfsoc_uart_init(void)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = uart_register_driver(&sirfsoc_uart_drv);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = platform_driver_register(&sirfsoc_uart_driver);
|
|
if (ret)
|
|
uart_unregister_driver(&sirfsoc_uart_drv);
|
|
out:
|
|
return ret;
|
|
}
|
|
module_init(sirfsoc_uart_init);
|
|
|
|
static void __exit sirfsoc_uart_exit(void)
|
|
{
|
|
platform_driver_unregister(&sirfsoc_uart_driver);
|
|
uart_unregister_driver(&sirfsoc_uart_drv);
|
|
}
|
|
module_exit(sirfsoc_uart_exit);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Bin Shi <Bin.Shi@csr.com>, Rong Wang<Rong.Wang@csr.com>");
|
|
MODULE_DESCRIPTION("CSR SiRFprimaII Uart Driver");
|