UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/hwmon/w83l785ts.c

286 lines
7.2 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* w83l785ts.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
* Copyright (C) 2003-2009 Jean Delvare <jdelvare@suse.de>
*
* Inspired from the lm83 driver. The W83L785TS-S is a sensor chip made
* by Winbond. It reports a single external temperature with a 1 deg
* resolution and a 3 deg accuracy. Datasheet can be obtained from
* Winbond's website at:
* http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf
*
* Ported to Linux 2.6 by Wolfgang Ziegler <nuppla@gmx.at> and Jean Delvare
* <jdelvare@suse.de>.
*
* Thanks to James Bolt <james@evilpenguin.com> for benchmarking the read
* error handling mechanism.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
/* How many retries on register read error */
#define MAX_RETRIES 5
/*
* Address to scan
* Address is fully defined internally and cannot be changed.
*/
static const unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END };
/*
* The W83L785TS-S registers
* Manufacturer ID is 0x5CA3 for Winbond.
*/
#define W83L785TS_REG_MAN_ID1 0x4D
#define W83L785TS_REG_MAN_ID2 0x4C
#define W83L785TS_REG_CHIP_ID 0x4E
#define W83L785TS_REG_CONFIG 0x40
#define W83L785TS_REG_TYPE 0x52
#define W83L785TS_REG_TEMP 0x27
#define W83L785TS_REG_TEMP_OVER 0x53 /* not sure about this one */
/*
* Conversions
* The W83L785TS-S uses signed 8-bit values.
*/
#define TEMP_FROM_REG(val) ((val) * 1000)
/*
* Functions declaration
*/
static int w83l785ts_probe(struct i2c_client *client);
static int w83l785ts_detect(struct i2c_client *client,
struct i2c_board_info *info);
static int w83l785ts_remove(struct i2c_client *client);
static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval);
static struct w83l785ts_data *w83l785ts_update_device(struct device *dev);
/*
* Driver data (common to all clients)
*/
static const struct i2c_device_id w83l785ts_id[] = {
{ "w83l785ts", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, w83l785ts_id);
static struct i2c_driver w83l785ts_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "w83l785ts",
},
.probe_new = w83l785ts_probe,
.remove = w83l785ts_remove,
.id_table = w83l785ts_id,
.detect = w83l785ts_detect,
.address_list = normal_i2c,
};
/*
* Client data (each client gets its own)
*/
struct w83l785ts_data {
struct device *hwmon_dev;
struct mutex update_lock;
bool valid; /* false until following fields are valid */
unsigned long last_updated; /* in jiffies */
/* registers values */
s8 temp[2]; /* 0: input, 1: critical limit */
};
/*
* Sysfs stuff
*/
static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct w83l785ts_data *data = w83l785ts_update_device(dev);
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]));
}
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 1);
/*
* Real code
*/
/* Return 0 if detection is successful, -ENODEV otherwise */
static int w83l785ts_detect(struct i2c_client *client,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
u16 man_id;
u8 chip_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
/* detection */
if ((w83l785ts_read_value(client, W83L785TS_REG_CONFIG, 0) & 0x80)
|| (w83l785ts_read_value(client, W83L785TS_REG_TYPE, 0) & 0xFC)) {
dev_dbg(&adapter->dev,
"W83L785TS-S detection failed at 0x%02x\n",
client->addr);
return -ENODEV;
}
/* Identification */
man_id = (w83l785ts_read_value(client, W83L785TS_REG_MAN_ID1, 0) << 8)
+ w83l785ts_read_value(client, W83L785TS_REG_MAN_ID2, 0);
chip_id = w83l785ts_read_value(client, W83L785TS_REG_CHIP_ID, 0);
if (man_id != 0x5CA3 /* Winbond */
|| chip_id != 0x70) { /* W83L785TS-S */
dev_dbg(&adapter->dev,
"Unsupported chip (man_id=0x%04X, chip_id=0x%02X)\n",
man_id, chip_id);
return -ENODEV;
}
strlcpy(info->type, "w83l785ts", I2C_NAME_SIZE);
return 0;
}
static int w83l785ts_probe(struct i2c_client *client)
{
struct w83l785ts_data *data;
struct device *dev = &client->dev;
int err;
data = devm_kzalloc(dev, sizeof(struct w83l785ts_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
/*
* Initialize the W83L785TS chip
* Nothing yet, assume it is already started.
*/
err = device_create_file(dev, &sensor_dev_attr_temp1_input.dev_attr);
if (err)
return err;
err = device_create_file(dev, &sensor_dev_attr_temp1_max.dev_attr);
if (err)
goto exit_remove;
/* Register sysfs hooks */
data->hwmon_dev = hwmon_device_register(dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
return 0;
exit_remove:
device_remove_file(dev, &sensor_dev_attr_temp1_input.dev_attr);
device_remove_file(dev, &sensor_dev_attr_temp1_max.dev_attr);
return err;
}
static int w83l785ts_remove(struct i2c_client *client)
{
struct w83l785ts_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
device_remove_file(&client->dev,
&sensor_dev_attr_temp1_input.dev_attr);
device_remove_file(&client->dev,
&sensor_dev_attr_temp1_max.dev_attr);
return 0;
}
static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval)
{
int value, i;
struct device *dev;
const char *prefix;
/*
* We might be called during detection, at which point the client
* isn't yet fully initialized, so we can't use dev_dbg on it
*/
if (i2c_get_clientdata(client)) {
dev = &client->dev;
prefix = "";
} else {
dev = &client->adapter->dev;
prefix = "w83l785ts: ";
}
/*
* Frequent read errors have been reported on Asus boards, so we
* retry on read errors. If it still fails (unlikely), return the
* default value requested by the caller.
*/
for (i = 1; i <= MAX_RETRIES; i++) {
value = i2c_smbus_read_byte_data(client, reg);
if (value >= 0) {
dev_dbg(dev, "%sRead 0x%02x from register 0x%02x.\n",
prefix, value, reg);
return value;
}
dev_dbg(dev, "%sRead failed, will retry in %d.\n", prefix, i);
msleep(i);
}
dev_err(dev, "%sCouldn't read value from register 0x%02x.\n", prefix,
reg);
return defval;
}
static struct w83l785ts_data *w83l785ts_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83l785ts_data *data = i2c_get_clientdata(client);
mutex_lock(&data->update_lock);
if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) {
dev_dbg(&client->dev, "Updating w83l785ts data.\n");
data->temp[0] = w83l785ts_read_value(client,
W83L785TS_REG_TEMP, data->temp[0]);
data->temp[1] = w83l785ts_read_value(client,
W83L785TS_REG_TEMP_OVER, data->temp[1]);
data->last_updated = jiffies;
data->valid = true;
}
mutex_unlock(&data->update_lock);
return data;
}
module_i2c_driver(w83l785ts_driver);
MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
MODULE_DESCRIPTION("W83L785TS-S driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink