768 lines
19 KiB
C
768 lines
19 KiB
C
/*
|
|
* Driver for Microchip MRF24J40 802.15.4 Wireless-PAN Networking controller
|
|
*
|
|
* Copyright (C) 2012 Alan Ott <alan@signal11.us>
|
|
* Signal 11 Software
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <net/wpan-phy.h>
|
|
#include <net/mac802154.h>
|
|
|
|
/* MRF24J40 Short Address Registers */
|
|
#define REG_RXMCR 0x00 /* Receive MAC control */
|
|
#define REG_PANIDL 0x01 /* PAN ID (low) */
|
|
#define REG_PANIDH 0x02 /* PAN ID (high) */
|
|
#define REG_SADRL 0x03 /* Short address (low) */
|
|
#define REG_SADRH 0x04 /* Short address (high) */
|
|
#define REG_EADR0 0x05 /* Long address (low) (high is EADR7) */
|
|
#define REG_TXMCR 0x11 /* Transmit MAC control */
|
|
#define REG_PACON0 0x16 /* Power Amplifier Control */
|
|
#define REG_PACON1 0x17 /* Power Amplifier Control */
|
|
#define REG_PACON2 0x18 /* Power Amplifier Control */
|
|
#define REG_TXNCON 0x1B /* Transmit Normal FIFO Control */
|
|
#define REG_TXSTAT 0x24 /* TX MAC Status Register */
|
|
#define REG_SOFTRST 0x2A /* Soft Reset */
|
|
#define REG_TXSTBL 0x2E /* TX Stabilization */
|
|
#define REG_INTSTAT 0x31 /* Interrupt Status */
|
|
#define REG_INTCON 0x32 /* Interrupt Control */
|
|
#define REG_RFCTL 0x36 /* RF Control Mode Register */
|
|
#define REG_BBREG1 0x39 /* Baseband Registers */
|
|
#define REG_BBREG2 0x3A /* */
|
|
#define REG_BBREG6 0x3E /* */
|
|
#define REG_CCAEDTH 0x3F /* Energy Detection Threshold */
|
|
|
|
/* MRF24J40 Long Address Registers */
|
|
#define REG_RFCON0 0x200 /* RF Control Registers */
|
|
#define REG_RFCON1 0x201
|
|
#define REG_RFCON2 0x202
|
|
#define REG_RFCON3 0x203
|
|
#define REG_RFCON5 0x205
|
|
#define REG_RFCON6 0x206
|
|
#define REG_RFCON7 0x207
|
|
#define REG_RFCON8 0x208
|
|
#define REG_RSSI 0x210
|
|
#define REG_SLPCON0 0x211 /* Sleep Clock Control Registers */
|
|
#define REG_SLPCON1 0x220
|
|
#define REG_WAKETIMEL 0x222 /* Wake-up Time Match Value Low */
|
|
#define REG_WAKETIMEH 0x223 /* Wake-up Time Match Value High */
|
|
#define REG_RX_FIFO 0x300 /* Receive FIFO */
|
|
|
|
/* Device configuration: Only channels 11-26 on page 0 are supported. */
|
|
#define MRF24J40_CHAN_MIN 11
|
|
#define MRF24J40_CHAN_MAX 26
|
|
#define CHANNEL_MASK (((u32)1 << (MRF24J40_CHAN_MAX + 1)) \
|
|
- ((u32)1 << MRF24J40_CHAN_MIN))
|
|
|
|
#define TX_FIFO_SIZE 128 /* From datasheet */
|
|
#define RX_FIFO_SIZE 144 /* From datasheet */
|
|
#define SET_CHANNEL_DELAY_US 192 /* From datasheet */
|
|
|
|
/* Device Private Data */
|
|
struct mrf24j40 {
|
|
struct spi_device *spi;
|
|
struct ieee802154_dev *dev;
|
|
|
|
struct mutex buffer_mutex; /* only used to protect buf */
|
|
struct completion tx_complete;
|
|
struct work_struct irqwork;
|
|
u8 *buf; /* 3 bytes. Used for SPI single-register transfers. */
|
|
};
|
|
|
|
/* Read/Write SPI Commands for Short and Long Address registers. */
|
|
#define MRF24J40_READSHORT(reg) ((reg) << 1)
|
|
#define MRF24J40_WRITESHORT(reg) ((reg) << 1 | 1)
|
|
#define MRF24J40_READLONG(reg) (1 << 15 | (reg) << 5)
|
|
#define MRF24J40_WRITELONG(reg) (1 << 15 | (reg) << 5 | 1 << 4)
|
|
|
|
/* Maximum speed to run the device at. TODO: Get the real max value from
|
|
* someone at Microchip since it isn't in the datasheet. */
|
|
#define MAX_SPI_SPEED_HZ 1000000
|
|
|
|
#define printdev(X) (&X->spi->dev)
|
|
|
|
static int write_short_reg(struct mrf24j40 *devrec, u8 reg, u8 value)
|
|
{
|
|
int ret;
|
|
struct spi_message msg;
|
|
struct spi_transfer xfer = {
|
|
.len = 2,
|
|
.tx_buf = devrec->buf,
|
|
.rx_buf = devrec->buf,
|
|
};
|
|
|
|
spi_message_init(&msg);
|
|
spi_message_add_tail(&xfer, &msg);
|
|
|
|
mutex_lock(&devrec->buffer_mutex);
|
|
devrec->buf[0] = MRF24J40_WRITESHORT(reg);
|
|
devrec->buf[1] = value;
|
|
|
|
ret = spi_sync(devrec->spi, &msg);
|
|
if (ret)
|
|
dev_err(printdev(devrec),
|
|
"SPI write Failed for short register 0x%hhx\n", reg);
|
|
|
|
mutex_unlock(&devrec->buffer_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int read_short_reg(struct mrf24j40 *devrec, u8 reg, u8 *val)
|
|
{
|
|
int ret = -1;
|
|
struct spi_message msg;
|
|
struct spi_transfer xfer = {
|
|
.len = 2,
|
|
.tx_buf = devrec->buf,
|
|
.rx_buf = devrec->buf,
|
|
};
|
|
|
|
spi_message_init(&msg);
|
|
spi_message_add_tail(&xfer, &msg);
|
|
|
|
mutex_lock(&devrec->buffer_mutex);
|
|
devrec->buf[0] = MRF24J40_READSHORT(reg);
|
|
devrec->buf[1] = 0;
|
|
|
|
ret = spi_sync(devrec->spi, &msg);
|
|
if (ret)
|
|
dev_err(printdev(devrec),
|
|
"SPI read Failed for short register 0x%hhx\n", reg);
|
|
else
|
|
*val = devrec->buf[1];
|
|
|
|
mutex_unlock(&devrec->buffer_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int read_long_reg(struct mrf24j40 *devrec, u16 reg, u8 *value)
|
|
{
|
|
int ret;
|
|
u16 cmd;
|
|
struct spi_message msg;
|
|
struct spi_transfer xfer = {
|
|
.len = 3,
|
|
.tx_buf = devrec->buf,
|
|
.rx_buf = devrec->buf,
|
|
};
|
|
|
|
spi_message_init(&msg);
|
|
spi_message_add_tail(&xfer, &msg);
|
|
|
|
cmd = MRF24J40_READLONG(reg);
|
|
mutex_lock(&devrec->buffer_mutex);
|
|
devrec->buf[0] = cmd >> 8 & 0xff;
|
|
devrec->buf[1] = cmd & 0xff;
|
|
devrec->buf[2] = 0;
|
|
|
|
ret = spi_sync(devrec->spi, &msg);
|
|
if (ret)
|
|
dev_err(printdev(devrec),
|
|
"SPI read Failed for long register 0x%hx\n", reg);
|
|
else
|
|
*value = devrec->buf[2];
|
|
|
|
mutex_unlock(&devrec->buffer_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int write_long_reg(struct mrf24j40 *devrec, u16 reg, u8 val)
|
|
{
|
|
int ret;
|
|
u16 cmd;
|
|
struct spi_message msg;
|
|
struct spi_transfer xfer = {
|
|
.len = 3,
|
|
.tx_buf = devrec->buf,
|
|
.rx_buf = devrec->buf,
|
|
};
|
|
|
|
spi_message_init(&msg);
|
|
spi_message_add_tail(&xfer, &msg);
|
|
|
|
cmd = MRF24J40_WRITELONG(reg);
|
|
mutex_lock(&devrec->buffer_mutex);
|
|
devrec->buf[0] = cmd >> 8 & 0xff;
|
|
devrec->buf[1] = cmd & 0xff;
|
|
devrec->buf[2] = val;
|
|
|
|
ret = spi_sync(devrec->spi, &msg);
|
|
if (ret)
|
|
dev_err(printdev(devrec),
|
|
"SPI write Failed for long register 0x%hx\n", reg);
|
|
|
|
mutex_unlock(&devrec->buffer_mutex);
|
|
return ret;
|
|
}
|
|
|
|
/* This function relies on an undocumented write method. Once a write command
|
|
and address is set, as many bytes of data as desired can be clocked into
|
|
the device. The datasheet only shows setting one byte at a time. */
|
|
static int write_tx_buf(struct mrf24j40 *devrec, u16 reg,
|
|
const u8 *data, size_t length)
|
|
{
|
|
int ret;
|
|
u16 cmd;
|
|
u8 lengths[2];
|
|
struct spi_message msg;
|
|
struct spi_transfer addr_xfer = {
|
|
.len = 2,
|
|
.tx_buf = devrec->buf,
|
|
};
|
|
struct spi_transfer lengths_xfer = {
|
|
.len = 2,
|
|
.tx_buf = &lengths, /* TODO: Is DMA really required for SPI? */
|
|
};
|
|
struct spi_transfer data_xfer = {
|
|
.len = length,
|
|
.tx_buf = data,
|
|
};
|
|
|
|
/* Range check the length. 2 bytes are used for the length fields.*/
|
|
if (length > TX_FIFO_SIZE-2) {
|
|
dev_err(printdev(devrec), "write_tx_buf() was passed too large a buffer. Performing short write.\n");
|
|
length = TX_FIFO_SIZE-2;
|
|
}
|
|
|
|
spi_message_init(&msg);
|
|
spi_message_add_tail(&addr_xfer, &msg);
|
|
spi_message_add_tail(&lengths_xfer, &msg);
|
|
spi_message_add_tail(&data_xfer, &msg);
|
|
|
|
cmd = MRF24J40_WRITELONG(reg);
|
|
mutex_lock(&devrec->buffer_mutex);
|
|
devrec->buf[0] = cmd >> 8 & 0xff;
|
|
devrec->buf[1] = cmd & 0xff;
|
|
lengths[0] = 0x0; /* Header Length. Set to 0 for now. TODO */
|
|
lengths[1] = length; /* Total length */
|
|
|
|
ret = spi_sync(devrec->spi, &msg);
|
|
if (ret)
|
|
dev_err(printdev(devrec), "SPI write Failed for TX buf\n");
|
|
|
|
mutex_unlock(&devrec->buffer_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int mrf24j40_read_rx_buf(struct mrf24j40 *devrec,
|
|
u8 *data, u8 *len, u8 *lqi)
|
|
{
|
|
u8 rx_len;
|
|
u8 addr[2];
|
|
u8 lqi_rssi[2];
|
|
u16 cmd;
|
|
int ret;
|
|
struct spi_message msg;
|
|
struct spi_transfer addr_xfer = {
|
|
.len = 2,
|
|
.tx_buf = &addr,
|
|
};
|
|
struct spi_transfer data_xfer = {
|
|
.len = 0x0, /* set below */
|
|
.rx_buf = data,
|
|
};
|
|
struct spi_transfer status_xfer = {
|
|
.len = 2,
|
|
.rx_buf = &lqi_rssi,
|
|
};
|
|
|
|
/* Get the length of the data in the RX FIFO. The length in this
|
|
* register exclues the 1-byte length field at the beginning. */
|
|
ret = read_long_reg(devrec, REG_RX_FIFO, &rx_len);
|
|
if (ret)
|
|
goto out;
|
|
|
|
/* Range check the RX FIFO length, accounting for the one-byte
|
|
* length field at the begining. */
|
|
if (rx_len > RX_FIFO_SIZE-1) {
|
|
dev_err(printdev(devrec), "Invalid length read from device. Performing short read.\n");
|
|
rx_len = RX_FIFO_SIZE-1;
|
|
}
|
|
|
|
if (rx_len > *len) {
|
|
/* Passed in buffer wasn't big enough. Should never happen. */
|
|
dev_err(printdev(devrec), "Buffer not big enough. Performing short read\n");
|
|
rx_len = *len;
|
|
}
|
|
|
|
/* Set up the commands to read the data. */
|
|
cmd = MRF24J40_READLONG(REG_RX_FIFO+1);
|
|
addr[0] = cmd >> 8 & 0xff;
|
|
addr[1] = cmd & 0xff;
|
|
data_xfer.len = rx_len;
|
|
|
|
spi_message_init(&msg);
|
|
spi_message_add_tail(&addr_xfer, &msg);
|
|
spi_message_add_tail(&data_xfer, &msg);
|
|
spi_message_add_tail(&status_xfer, &msg);
|
|
|
|
ret = spi_sync(devrec->spi, &msg);
|
|
if (ret) {
|
|
dev_err(printdev(devrec), "SPI RX Buffer Read Failed.\n");
|
|
goto out;
|
|
}
|
|
|
|
*lqi = lqi_rssi[0];
|
|
*len = rx_len;
|
|
|
|
#ifdef DEBUG
|
|
print_hex_dump(KERN_DEBUG, "mrf24j40 rx: ",
|
|
DUMP_PREFIX_OFFSET, 16, 1, data, *len, 0);
|
|
printk(KERN_DEBUG "mrf24j40 rx: lqi: %02hhx rssi: %02hhx\n",
|
|
lqi_rssi[0], lqi_rssi[1]);
|
|
#endif
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int mrf24j40_tx(struct ieee802154_dev *dev, struct sk_buff *skb)
|
|
{
|
|
struct mrf24j40 *devrec = dev->priv;
|
|
u8 val;
|
|
int ret = 0;
|
|
|
|
dev_dbg(printdev(devrec), "tx packet of %d bytes\n", skb->len);
|
|
|
|
ret = write_tx_buf(devrec, 0x000, skb->data, skb->len);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Set TXNTRIG bit of TXNCON to send packet */
|
|
ret = read_short_reg(devrec, REG_TXNCON, &val);
|
|
if (ret)
|
|
goto err;
|
|
val |= 0x1;
|
|
val &= ~0x4;
|
|
write_short_reg(devrec, REG_TXNCON, val);
|
|
|
|
INIT_COMPLETION(devrec->tx_complete);
|
|
|
|
/* Wait for the device to send the TX complete interrupt. */
|
|
ret = wait_for_completion_interruptible_timeout(
|
|
&devrec->tx_complete,
|
|
5 * HZ);
|
|
if (ret == -ERESTARTSYS)
|
|
goto err;
|
|
if (ret == 0) {
|
|
ret = -ETIMEDOUT;
|
|
goto err;
|
|
}
|
|
|
|
/* Check for send error from the device. */
|
|
ret = read_short_reg(devrec, REG_TXSTAT, &val);
|
|
if (ret)
|
|
goto err;
|
|
if (val & 0x1) {
|
|
dev_err(printdev(devrec), "Error Sending. Retry count exceeded\n");
|
|
ret = -ECOMM; /* TODO: Better error code ? */
|
|
} else
|
|
dev_dbg(printdev(devrec), "Packet Sent\n");
|
|
|
|
err:
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mrf24j40_ed(struct ieee802154_dev *dev, u8 *level)
|
|
{
|
|
/* TODO: */
|
|
printk(KERN_WARNING "mrf24j40: ed not implemented\n");
|
|
*level = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int mrf24j40_start(struct ieee802154_dev *dev)
|
|
{
|
|
struct mrf24j40 *devrec = dev->priv;
|
|
u8 val;
|
|
int ret;
|
|
|
|
dev_dbg(printdev(devrec), "start\n");
|
|
|
|
ret = read_short_reg(devrec, REG_INTCON, &val);
|
|
if (ret)
|
|
return ret;
|
|
val &= ~(0x1|0x8); /* Clear TXNIE and RXIE. Enable interrupts */
|
|
write_short_reg(devrec, REG_INTCON, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mrf24j40_stop(struct ieee802154_dev *dev)
|
|
{
|
|
struct mrf24j40 *devrec = dev->priv;
|
|
u8 val;
|
|
int ret;
|
|
dev_dbg(printdev(devrec), "stop\n");
|
|
|
|
ret = read_short_reg(devrec, REG_INTCON, &val);
|
|
if (ret)
|
|
return;
|
|
val |= 0x1|0x8; /* Set TXNIE and RXIE. Disable Interrupts */
|
|
write_short_reg(devrec, REG_INTCON, val);
|
|
|
|
return;
|
|
}
|
|
|
|
static int mrf24j40_set_channel(struct ieee802154_dev *dev,
|
|
int page, int channel)
|
|
{
|
|
struct mrf24j40 *devrec = dev->priv;
|
|
u8 val;
|
|
int ret;
|
|
|
|
dev_dbg(printdev(devrec), "Set Channel %d\n", channel);
|
|
|
|
WARN_ON(page != 0);
|
|
WARN_ON(channel < MRF24J40_CHAN_MIN);
|
|
WARN_ON(channel > MRF24J40_CHAN_MAX);
|
|
|
|
/* Set Channel TODO */
|
|
val = (channel-11) << 4 | 0x03;
|
|
write_long_reg(devrec, REG_RFCON0, val);
|
|
|
|
/* RF Reset */
|
|
ret = read_short_reg(devrec, REG_RFCTL, &val);
|
|
if (ret)
|
|
return ret;
|
|
val |= 0x04;
|
|
write_short_reg(devrec, REG_RFCTL, val);
|
|
val &= ~0x04;
|
|
write_short_reg(devrec, REG_RFCTL, val);
|
|
|
|
udelay(SET_CHANNEL_DELAY_US); /* per datasheet */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mrf24j40_filter(struct ieee802154_dev *dev,
|
|
struct ieee802154_hw_addr_filt *filt,
|
|
unsigned long changed)
|
|
{
|
|
struct mrf24j40 *devrec = dev->priv;
|
|
|
|
dev_dbg(printdev(devrec), "filter\n");
|
|
|
|
if (changed & IEEE802515_AFILT_SADDR_CHANGED) {
|
|
/* Short Addr */
|
|
u8 addrh, addrl;
|
|
addrh = filt->short_addr >> 8 & 0xff;
|
|
addrl = filt->short_addr & 0xff;
|
|
|
|
write_short_reg(devrec, REG_SADRH, addrh);
|
|
write_short_reg(devrec, REG_SADRL, addrl);
|
|
dev_dbg(printdev(devrec),
|
|
"Set short addr to %04hx\n", filt->short_addr);
|
|
}
|
|
|
|
if (changed & IEEE802515_AFILT_IEEEADDR_CHANGED) {
|
|
/* Device Address */
|
|
int i;
|
|
for (i = 0; i < 8; i++)
|
|
write_short_reg(devrec, REG_EADR0+i,
|
|
filt->ieee_addr[i]);
|
|
|
|
#ifdef DEBUG
|
|
printk(KERN_DEBUG "Set long addr to: ");
|
|
for (i = 0; i < 8; i++)
|
|
printk("%02hhx ", filt->ieee_addr[i]);
|
|
printk(KERN_DEBUG "\n");
|
|
#endif
|
|
}
|
|
|
|
if (changed & IEEE802515_AFILT_PANID_CHANGED) {
|
|
/* PAN ID */
|
|
u8 panidl, panidh;
|
|
panidh = filt->pan_id >> 8 & 0xff;
|
|
panidl = filt->pan_id & 0xff;
|
|
write_short_reg(devrec, REG_PANIDH, panidh);
|
|
write_short_reg(devrec, REG_PANIDL, panidl);
|
|
|
|
dev_dbg(printdev(devrec), "Set PANID to %04hx\n", filt->pan_id);
|
|
}
|
|
|
|
if (changed & IEEE802515_AFILT_PANC_CHANGED) {
|
|
/* Pan Coordinator */
|
|
u8 val;
|
|
int ret;
|
|
|
|
ret = read_short_reg(devrec, REG_RXMCR, &val);
|
|
if (ret)
|
|
return ret;
|
|
if (filt->pan_coord)
|
|
val |= 0x8;
|
|
else
|
|
val &= ~0x8;
|
|
write_short_reg(devrec, REG_RXMCR, val);
|
|
|
|
/* REG_SLOTTED is maintained as default (unslotted/CSMA-CA).
|
|
* REG_ORDER is maintained as default (no beacon/superframe).
|
|
*/
|
|
|
|
dev_dbg(printdev(devrec), "Set Pan Coord to %s\n",
|
|
filt->pan_coord ? "on" : "off");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mrf24j40_handle_rx(struct mrf24j40 *devrec)
|
|
{
|
|
u8 len = RX_FIFO_SIZE;
|
|
u8 lqi = 0;
|
|
u8 val;
|
|
int ret = 0;
|
|
struct sk_buff *skb;
|
|
|
|
/* Turn off reception of packets off the air. This prevents the
|
|
* device from overwriting the buffer while we're reading it. */
|
|
ret = read_short_reg(devrec, REG_BBREG1, &val);
|
|
if (ret)
|
|
goto out;
|
|
val |= 4; /* SET RXDECINV */
|
|
write_short_reg(devrec, REG_BBREG1, val);
|
|
|
|
skb = alloc_skb(len, GFP_KERNEL);
|
|
if (!skb) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
ret = mrf24j40_read_rx_buf(devrec, skb_put(skb, len), &len, &lqi);
|
|
if (ret < 0) {
|
|
dev_err(printdev(devrec), "Failure reading RX FIFO\n");
|
|
kfree_skb(skb);
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
/* Cut off the checksum */
|
|
skb_trim(skb, len-2);
|
|
|
|
/* TODO: Other drivers call ieee20154_rx_irqsafe() here (eg: cc2040,
|
|
* also from a workqueue). I think irqsafe is not necessary here.
|
|
* Can someone confirm? */
|
|
ieee802154_rx_irqsafe(devrec->dev, skb, lqi);
|
|
|
|
dev_dbg(printdev(devrec), "RX Handled\n");
|
|
|
|
out:
|
|
/* Turn back on reception of packets off the air. */
|
|
ret = read_short_reg(devrec, REG_BBREG1, &val);
|
|
if (ret)
|
|
return ret;
|
|
val &= ~0x4; /* Clear RXDECINV */
|
|
write_short_reg(devrec, REG_BBREG1, val);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct ieee802154_ops mrf24j40_ops = {
|
|
.owner = THIS_MODULE,
|
|
.xmit = mrf24j40_tx,
|
|
.ed = mrf24j40_ed,
|
|
.start = mrf24j40_start,
|
|
.stop = mrf24j40_stop,
|
|
.set_channel = mrf24j40_set_channel,
|
|
.set_hw_addr_filt = mrf24j40_filter,
|
|
};
|
|
|
|
static irqreturn_t mrf24j40_isr(int irq, void *data)
|
|
{
|
|
struct mrf24j40 *devrec = data;
|
|
|
|
disable_irq_nosync(irq);
|
|
|
|
schedule_work(&devrec->irqwork);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void mrf24j40_isrwork(struct work_struct *work)
|
|
{
|
|
struct mrf24j40 *devrec = container_of(work, struct mrf24j40, irqwork);
|
|
u8 intstat;
|
|
int ret;
|
|
|
|
/* Read the interrupt status */
|
|
ret = read_short_reg(devrec, REG_INTSTAT, &intstat);
|
|
if (ret)
|
|
goto out;
|
|
|
|
/* Check for TX complete */
|
|
if (intstat & 0x1)
|
|
complete(&devrec->tx_complete);
|
|
|
|
/* Check for Rx */
|
|
if (intstat & 0x8)
|
|
mrf24j40_handle_rx(devrec);
|
|
|
|
out:
|
|
enable_irq(devrec->spi->irq);
|
|
}
|
|
|
|
static int __devinit mrf24j40_probe(struct spi_device *spi)
|
|
{
|
|
int ret = -ENOMEM;
|
|
u8 val;
|
|
struct mrf24j40 *devrec;
|
|
|
|
printk(KERN_INFO "mrf24j40: probe(). IRQ: %d\n", spi->irq);
|
|
|
|
devrec = kzalloc(sizeof(struct mrf24j40), GFP_KERNEL);
|
|
if (!devrec)
|
|
goto err_devrec;
|
|
devrec->buf = kzalloc(3, GFP_KERNEL);
|
|
if (!devrec->buf)
|
|
goto err_buf;
|
|
|
|
spi->mode = SPI_MODE_0; /* TODO: Is this appropriate for right here? */
|
|
if (spi->max_speed_hz > MAX_SPI_SPEED_HZ)
|
|
spi->max_speed_hz = MAX_SPI_SPEED_HZ;
|
|
|
|
mutex_init(&devrec->buffer_mutex);
|
|
init_completion(&devrec->tx_complete);
|
|
INIT_WORK(&devrec->irqwork, mrf24j40_isrwork);
|
|
devrec->spi = spi;
|
|
dev_set_drvdata(&spi->dev, devrec);
|
|
|
|
/* Register with the 802154 subsystem */
|
|
|
|
devrec->dev = ieee802154_alloc_device(0, &mrf24j40_ops);
|
|
if (!devrec->dev)
|
|
goto err_alloc_dev;
|
|
|
|
devrec->dev->priv = devrec;
|
|
devrec->dev->parent = &devrec->spi->dev;
|
|
devrec->dev->phy->channels_supported[0] = CHANNEL_MASK;
|
|
devrec->dev->flags = IEEE802154_HW_OMIT_CKSUM|IEEE802154_HW_AACK;
|
|
|
|
dev_dbg(printdev(devrec), "registered mrf24j40\n");
|
|
ret = ieee802154_register_device(devrec->dev);
|
|
if (ret)
|
|
goto err_register_device;
|
|
|
|
/* Initialize the device.
|
|
From datasheet section 3.2: Initialization. */
|
|
write_short_reg(devrec, REG_SOFTRST, 0x07);
|
|
write_short_reg(devrec, REG_PACON2, 0x98);
|
|
write_short_reg(devrec, REG_TXSTBL, 0x95);
|
|
write_long_reg(devrec, REG_RFCON0, 0x03);
|
|
write_long_reg(devrec, REG_RFCON1, 0x01);
|
|
write_long_reg(devrec, REG_RFCON2, 0x80);
|
|
write_long_reg(devrec, REG_RFCON6, 0x90);
|
|
write_long_reg(devrec, REG_RFCON7, 0x80);
|
|
write_long_reg(devrec, REG_RFCON8, 0x10);
|
|
write_long_reg(devrec, REG_SLPCON1, 0x21);
|
|
write_short_reg(devrec, REG_BBREG2, 0x80);
|
|
write_short_reg(devrec, REG_CCAEDTH, 0x60);
|
|
write_short_reg(devrec, REG_BBREG6, 0x40);
|
|
write_short_reg(devrec, REG_RFCTL, 0x04);
|
|
write_short_reg(devrec, REG_RFCTL, 0x0);
|
|
udelay(192);
|
|
|
|
/* Set RX Mode. RXMCR<1:0>: 0x0 normal, 0x1 promisc, 0x2 error */
|
|
ret = read_short_reg(devrec, REG_RXMCR, &val);
|
|
if (ret)
|
|
goto err_read_reg;
|
|
val &= ~0x3; /* Clear RX mode (normal) */
|
|
write_short_reg(devrec, REG_RXMCR, val);
|
|
|
|
ret = request_irq(spi->irq,
|
|
mrf24j40_isr,
|
|
IRQF_TRIGGER_FALLING,
|
|
dev_name(&spi->dev),
|
|
devrec);
|
|
|
|
if (ret) {
|
|
dev_err(printdev(devrec), "Unable to get IRQ");
|
|
goto err_irq;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_irq:
|
|
err_read_reg:
|
|
ieee802154_unregister_device(devrec->dev);
|
|
err_register_device:
|
|
ieee802154_free_device(devrec->dev);
|
|
err_alloc_dev:
|
|
kfree(devrec->buf);
|
|
err_buf:
|
|
kfree(devrec);
|
|
err_devrec:
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit mrf24j40_remove(struct spi_device *spi)
|
|
{
|
|
struct mrf24j40 *devrec = dev_get_drvdata(&spi->dev);
|
|
|
|
dev_dbg(printdev(devrec), "remove\n");
|
|
|
|
free_irq(spi->irq, devrec);
|
|
flush_work(&devrec->irqwork); /* TODO: Is this the right call? */
|
|
ieee802154_unregister_device(devrec->dev);
|
|
ieee802154_free_device(devrec->dev);
|
|
/* TODO: Will ieee802154_free_device() wait until ->xmit() is
|
|
* complete? */
|
|
|
|
/* Clean up the SPI stuff. */
|
|
dev_set_drvdata(&spi->dev, NULL);
|
|
kfree(devrec->buf);
|
|
kfree(devrec);
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_device_id mrf24j40_ids[] = {
|
|
{ "mrf24j40", 0 },
|
|
{ "mrf24j40ma", 0 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, mrf24j40_ids);
|
|
|
|
static struct spi_driver mrf24j40_driver = {
|
|
.driver = {
|
|
.name = "mrf24j40",
|
|
.bus = &spi_bus_type,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.id_table = mrf24j40_ids,
|
|
.probe = mrf24j40_probe,
|
|
.remove = __devexit_p(mrf24j40_remove),
|
|
};
|
|
|
|
static int __init mrf24j40_init(void)
|
|
{
|
|
return spi_register_driver(&mrf24j40_driver);
|
|
}
|
|
|
|
static void __exit mrf24j40_exit(void)
|
|
{
|
|
spi_unregister_driver(&mrf24j40_driver);
|
|
}
|
|
|
|
module_init(mrf24j40_init);
|
|
module_exit(mrf24j40_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Alan Ott");
|
|
MODULE_DESCRIPTION("MRF24J40 SPI 802.15.4 Controller Driver");
|