| .. |
|
Kconfig
|
net: phy: allow bcm84881 to be a module
|
2020-02-17 15:08:55 -08:00 |
|
Makefile
|
net: add helpers to resolve negotiated flow control
|
2020-02-16 19:39:44 -08:00 |
|
adin.c
|
net: phy: adin: fix a warning about msleep
|
2020-01-19 16:06:42 +01:00 |
|
amd.c
|
net: phy: switch drivers to use dynamic feature detection
|
2019-04-15 17:19:54 -07:00 |
|
aquantia.h
|
net: phy: Use the correct style for SPDX License Identifier
|
2019-11-27 11:25:48 -08:00 |
|
aquantia_hwmon.c
|
net: phy: aquantia: add hwmon support
|
2019-02-25 14:16:22 -08:00 |
|
aquantia_main.c
|
net: switch to using PHY_INTERFACE_MODE_10GBASER rather than 10GKR
|
2020-01-05 15:05:35 -08:00 |
|
at803x.c
|
net: phy: at803x: disable vddio regulator
|
2020-01-31 07:54:48 -08:00 |
|
ax88796b.c
|
net: phy: rename Asix Electronics PHY driver
|
2019-06-09 13:24:17 -07:00 |
|
bcm-cygnus.c
|
net: phy: switch drivers to use dynamic feature detection
|
2019-04-15 17:19:54 -07:00 |
|
bcm-phy-lib.c
|
net: phy: Prepare for moving Omega out of bcm7xxx
|
2019-03-21 13:41:26 -07:00 |
|
bcm-phy-lib.h
|
net: phy: Use the correct style for SPDX License Identifier
|
2019-11-27 11:25:48 -08:00 |
|
bcm7xxx.c
|
net: phy: bcm7xxx: define soft_reset for 40nm EPHY
|
2019-10-18 10:00:07 -07:00 |
|
bcm63xx.c
|
net: phy: switch drivers to use dynamic feature detection
|
2019-04-15 17:19:54 -07:00 |
|
bcm87xx.c
|
net: phy: bcm87xx: improve bcm87xx_config_init and feature detection
|
2019-05-26 21:56:41 -07:00 |
|
bcm84881.c
|
net: switch to using PHY_INTERFACE_MODE_10GBASER rather than 10GKR
|
2020-01-05 15:05:35 -08:00 |
|
broadcom.c
|
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
|
2020-02-21 13:39:34 -08:00 |
|
cicada.c
|
net: phy: switch drivers to use dynamic feature detection
|
2019-04-15 17:19:54 -07:00 |
|
cortina.c
|
net: phy: remove gen10g_no_soft_reset
|
2019-03-03 21:47:57 -08:00 |
|
davicom.c
|
net: phy: switch drivers to use dynamic feature detection
|
2019-04-15 17:19:54 -07:00 |
|
dp83tc811.c
|
net: phy: remove calls to genphy_config_init
|
2019-08-17 12:34:50 -07:00 |
|
dp83640.c
|
net: Introduce a new MII time stamping interface.
|
2019-12-25 19:51:33 -08:00 |
|
dp83640_reg.h
|
…
|
|
|
dp83822.c
|
net: phy: DP83822: Add support for additional DP83825 devices
|
2020-01-23 21:21:12 +01:00 |
|
dp83848.c
|
net: phy: remove calls to genphy_config_init
|
2019-08-17 12:34:50 -07:00 |
|
dp83867.c
|
net: phy: dp83867: Add speed optimization feature
|
2020-02-21 11:43:56 -08:00 |
|
dp83869.c
|
net: phy: dp83869: Remove unneeded semicolon
|
2019-12-14 16:11:40 -08:00 |
|
et1011c.c
|
net: phy: switch drivers to use dynamic feature detection
|
2019-04-15 17:19:54 -07:00 |
|
fixed_phy.c
|
net: phy: fixed_phy: switch to using fwnode_gpiod_get_index
|
2020-01-05 14:27:01 -08:00 |
|
icplus.c
|
net: phy: switch drivers to use dynamic feature detection
|
2019-04-15 17:19:54 -07:00 |
|
intel-xway.c
|
net: phy: switch drivers to use dynamic feature detection
|
2019-04-15 17:19:54 -07:00 |
|
linkmode.c
|
net: add linkmode helper for setting flow control advertisement
|
2020-02-16 19:39:44 -08:00 |
|
lxt.c
|
net: phy: provide and use genphy_read_status_fixed()
|
2019-12-19 12:52:34 -08:00 |
|
marvell.c
|
net: phy: marvell: use genphy_check_and_restart_aneg()
|
2019-12-19 12:52:34 -08:00 |
|
marvell10g.c
|
net: switch to using PHY_INTERFACE_MODE_10GBASER rather than 10GKR
|
2020-01-05 15:05:35 -08:00 |
|
mdio-aspeed.c
|
net: phy: Add mdio-aspeed
|
2019-08-02 17:56:28 -07:00 |
|
mdio-bcm-iproc.c
|
net: phy: restore mdio regs in the iproc mdio driver
|
2020-02-16 19:19:18 -08:00 |
|
mdio-bcm-unimac.c
|
net: phy: mdio-bcm-unimac: remove redundant !timeout check
|
2019-03-27 14:27:30 -07:00 |
|
mdio-bitbang.c
|
net: phy: Fixup GPLv2 SPDX tags based on license text
|
2019-01-22 20:58:40 -08:00 |
|
mdio-boardinfo.c
|
net: phy: Convert some PHY and MDIO driver files to SPDX headers
|
2019-01-22 20:53:08 -08:00 |
|
mdio-boardinfo.h
|
…
|
|
|
mdio-cavium.c
|
net: phy: Add SDPX tag based on COPYING file
|
2019-01-22 20:59:18 -08:00 |
|
mdio-cavium.h
|
net: phy: Use the correct style for SPDX License Identifier
|
2019-11-27 11:25:48 -08:00 |
|
mdio-gpio.c
|
net: phy: Fixup GPLv2 SPDX tags based on license text
|
2019-01-22 20:58:40 -08:00 |
|
mdio-hisi-femac.c
|
phy: mdio-hisi-femac: use devm_platform_ioremap_resource() to simplify code
|
2019-08-28 14:51:00 -07:00 |
|
mdio-i2c.c
|
net: mdio-i2c: add support for Clause 45 accesses
|
2019-12-11 11:53:41 -08:00 |
|
mdio-i2c.h
|
net: phy: Use the correct style for SPDX License Identifier
|
2019-11-27 11:25:48 -08:00 |
|
mdio-moxart.c
|
phy: mdio-moxart: use devm_platform_ioremap_resource() to simplify code
|
2019-08-28 14:51:00 -07:00 |
|
mdio-mscc-miim.c
|
drivers: net: Remove device_node checks with of_mdiobus_register()
|
2018-05-16 14:20:36 -04:00 |
|
mdio-mux-bcm-iproc.c
|
net: phy: Convert some PHY and MDIO driver files to SPDX headers
|
2019-01-22 20:53:08 -08:00 |
|
mdio-mux-gpio.c
|
net: phy: Add SDPX tag based on COPYING file
|
2019-01-22 20:59:18 -08:00 |
|
mdio-mux-meson-g12a.c
|
clk: let init callback return an error code
|
2019-12-23 18:53:13 -08:00 |
|
mdio-mux-mmioreg.c
|
net: phy: Convert some PHY and MDIO driver files to SPDX headers
|
2019-01-22 20:53:08 -08:00 |
|
mdio-mux-multiplexer.c
|
drivers: net: phy: mdio-mux: Add support for Generic Mux controls
|
2019-02-27 12:52:20 -08:00 |
|
mdio-mux.c
|
net: phy: Add SDPX tag based on COPYING file
|
2019-01-22 20:59:18 -08:00 |
|
mdio-octeon.c
|
net: phy: Add SDPX tag based on COPYING file
|
2019-01-22 20:59:18 -08:00 |
|
mdio-sun4i.c
|
phy: mdio-sun4i: add missed regulator_disable in remove
|
2019-11-18 17:22:40 -08:00 |
|
mdio-thunder.c
|
phy: mdio-thunder: add missed pci_release_regions in remove
|
2019-12-06 12:05:06 -08:00 |
|
mdio-xgene.c
|
net: phy: xgene: use devm_platform_ioremap_resource() to simplify code
|
2019-08-01 13:10:34 -04:00 |
|
mdio-xgene.h
|
net: phy: Use the correct style for SPDX License Identifier
|
2019-11-27 11:25:48 -08:00 |
|
mdio_bus.c
|
net: phy: Maintain MDIO device and bus statistics
|
2020-01-17 11:12:44 +01:00 |
|
mdio_device.c
|
net: phy: allow for reset line to be tied to a sleepy GPIO controller
|
2019-10-04 18:07:45 -07:00 |
|
meson-gxl.c
|
net: phy: remove calls to genphy_config_init
|
2019-08-17 12:34:50 -07:00 |
|
micrel.c
|
net: phy: micrel: Update KSZ87xx PHY name
|
2019-10-17 16:31:52 -07:00 |
|
microchip.c
|
net: phy: remove calls to genphy_config_init
|
2019-08-17 12:34:50 -07:00 |
|
microchip_t1.c
|
net: phy: remove calls to genphy_config_init
|
2019-08-17 12:34:50 -07:00 |
|
mii_timestamper.c
|
net: mii_timestamper: fix static allocation by PHY driver
|
2020-01-31 07:46:11 -08:00 |
|
mscc.c
|
net: phy: mscc: PN rollover support
|
2020-01-14 11:31:41 -08:00 |
|
mscc_fc_buffer.h
|
net: phy: mscc: macsec initialization
|
2020-01-14 11:31:41 -08:00 |
|
mscc_mac.h
|
net: phy: mscc: macsec initialization
|
2020-01-14 11:31:41 -08:00 |
|
mscc_macsec.h
|
net: phy: mscc: PN rollover support
|
2020-01-14 11:31:41 -08:00 |
|
national.c
|
net/phy: fix DP83865 10 Mbps HDX loopback disable function
|
2019-09-21 18:21:52 -07:00 |
|
nxp-tja11xx.c
|
net: phy: tja11xx: Switch to HWMON_CHANNEL_INFO()
|
2019-05-29 22:02:18 -07:00 |
|
phy-c45.c
|
phy: avoid unnecessary link-up delay in polling mode
|
2020-02-19 16:17:28 -08:00 |
|
phy-core.c
|
ethtool: Add support for low latency RS FEC
|
2020-02-18 19:17:31 -08:00 |
|
phy.c
|
net: phy: add new version of phy_do_ioctl
|
2020-01-21 10:50:41 +01:00 |
|
phy_device.c
|
phy: avoid unnecessary link-up delay in polling mode
|
2020-02-19 16:17:28 -08:00 |
|
phy_led_triggers.c
|
net: phy: phy_led_triggers: Fix a possible null-pointer dereference in phy_led_trigger_change_speed()
|
2019-07-31 18:56:11 -04:00 |
|
phylink.c
|
net: phylink: improve initial mac configuration
|
2020-02-16 19:39:45 -08:00 |
|
qsemi.c
|
net: phy: switch drivers to use dynamic feature detection
|
2019-04-15 17:19:54 -07:00 |
|
realtek.c
|
net: phy: realtek: add support for configuring the RX delay on RTL8211F
|
2019-12-26 13:22:17 -08:00 |
|
rockchip.c
|
net: phy: switch drivers to use dynamic feature detection
|
2019-04-15 17:19:54 -07:00 |
|
sfp-bus.c
|
net: switch to using PHY_INTERFACE_MODE_10GBASER rather than 10GKR
|
2020-01-05 15:05:35 -08:00 |
|
sfp.c
|
net: sfp: report error on failure to read sfp soft status
|
2019-12-19 17:26:07 -08:00 |
|
sfp.h
|
net: sfp: add module start/stop upstream notifications
|
2019-12-11 11:53:41 -08:00 |
|
smsc.c
|
net: phy: smsc: LAN8740: add PHY_RST_AFTER_CLK_EN flag
|
2019-10-23 21:44:44 -07:00 |
|
spi_ks8995.c
|
spi: Micrel eth switch: declare missing of table
|
2019-04-23 10:44:44 -07:00 |
|
ste10Xp.c
|
net: phy: switch drivers to use dynamic feature detection
|
2019-04-15 17:19:54 -07:00 |
|
swphy.c
|
net: phy: swphy: emulate register MII_ESTATUS
|
2019-08-15 11:43:48 -07:00 |
|
swphy.h
|
…
|
|
|
teranetics.c
|
net: phy: remove gen10g_no_soft_reset
|
2019-03-03 21:47:57 -08:00 |
|
uPD60620.c
|
net: phy: use phy_resolve_aneg_pause()
|
2019-12-19 12:52:34 -08:00 |
|
vitesse.c
|
net: phy: remove calls to genphy_config_init
|
2019-08-17 12:34:50 -07:00 |
|
xilinx_gmii2rgmii.c
|
net: phy: gmii2rgmii: Dont use priv field in phy device
|
2019-09-05 12:32:06 +02:00 |
e65ee2fb54