OpenCloudOS-Kernel/drivers/mmc
John Calixto cb87ea28ed mmc: core: Add mmc CMD+ACMD passthrough ioctl
Allows appropriately-privileged applications to send CMD (normal) and ACMD
(application-specific; preceded with CMD55) commands to cards/devices on
the mmc bus.  This is primarily useful for enabling the security
functionality built in to every SD card.

It can also be used as a generic passthrough (e.g. to enable virtual
machines to control mmc bus devices directly).  However, this use case has
not been tested rigorously.  Generic passthrough testing was only conducted
for a few non-security opcodes to prove the feasibility of the passthrough.

Since any opcode can be sent using this passthrough, it is very possible to
render the card/device unusable.  Applications that use this ioctl must
have CAP_SYS_RAWIO.

Security commands tested on TI PCIxx12 (SDHCI), Sigma Designs SMP8652 SoC,
TI OMAP3621/OMAP3630 SoC, Samsung S5PC110 SoC, Qualcomm MSM7200A SoC.

Signed-off-by: John Calixto <john.calixto@modsystems.com>
Reviewed-by: Andrei Warkentin <andreiw@motorola.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24 21:02:54 -04:00
..
card mmc: core: Add mmc CMD+ACMD passthrough ioctl 2011-05-24 21:02:54 -04:00
core mmc: core: Add mmc CMD+ACMD passthrough ioctl 2011-05-24 21:02:54 -04:00
host mmc: sdhci: Fix read-only detection with JMicron 388 chip 2011-05-24 21:02:42 -04:00
Kconfig mmc: explicitly mention SDIO support in Kconfig 2008-10-12 11:04:36 +02:00
Makefile mmc: Makefile: Fix EXTRA_CFLAGS assignment 2010-10-23 21:11:15 +08:00