215 lines
5.5 KiB
C
215 lines
5.5 KiB
C
/*
|
|
* linux/drivers/ide/pci/hpt34x.c Version 0.40 Sept 10, 2002
|
|
*
|
|
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
|
|
* May be copied or modified under the terms of the GNU General Public License
|
|
*
|
|
*
|
|
* 00:12.0 Unknown mass storage controller:
|
|
* Triones Technologies, Inc.
|
|
* Unknown device 0003 (rev 01)
|
|
*
|
|
* hde: UDMA 2 (0x0000 0x0002) (0x0000 0x0010)
|
|
* hdf: UDMA 2 (0x0002 0x0012) (0x0010 0x0030)
|
|
* hde: DMA 2 (0x0000 0x0002) (0x0000 0x0010)
|
|
* hdf: DMA 2 (0x0002 0x0012) (0x0010 0x0030)
|
|
* hdg: DMA 1 (0x0012 0x0052) (0x0030 0x0070)
|
|
* hdh: DMA 1 (0x0052 0x0252) (0x0070 0x00f0)
|
|
*
|
|
* ide-pci.c reference
|
|
*
|
|
* Since there are two cards that report almost identically,
|
|
* the only discernable difference is the values reported in pcicmd.
|
|
* Booting-BIOS card or HPT363 :: pcicmd == 0x07
|
|
* Non-bootable card or HPT343 :: pcicmd == 0x05
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/hdreg.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ide.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
|
|
#define HPT343_DEBUG_DRIVE_INFO 0
|
|
|
|
static void hpt34x_set_mode(ide_drive_t *drive, const u8 speed)
|
|
{
|
|
struct pci_dev *dev = HWIF(drive)->pci_dev;
|
|
u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0;
|
|
u8 hi_speed, lo_speed;
|
|
|
|
hi_speed = speed >> 4;
|
|
lo_speed = speed & 0x0f;
|
|
|
|
if (hi_speed & 7) {
|
|
hi_speed = (hi_speed & 4) ? 0x01 : 0x10;
|
|
} else {
|
|
lo_speed <<= 5;
|
|
lo_speed >>= 5;
|
|
}
|
|
|
|
pci_read_config_dword(dev, 0x44, ®1);
|
|
pci_read_config_dword(dev, 0x48, ®2);
|
|
tmp1 = ((lo_speed << (3*drive->dn)) | (reg1 & ~(7 << (3*drive->dn))));
|
|
tmp2 = ((hi_speed << drive->dn) | (reg2 & ~(0x11 << drive->dn)));
|
|
pci_write_config_dword(dev, 0x44, tmp1);
|
|
pci_write_config_dword(dev, 0x48, tmp2);
|
|
|
|
#if HPT343_DEBUG_DRIVE_INFO
|
|
printk("%s: %s drive%d (0x%04x 0x%04x) (0x%04x 0x%04x)" \
|
|
" (0x%02x 0x%02x)\n",
|
|
drive->name, ide_xfer_verbose(speed),
|
|
drive->dn, reg1, tmp1, reg2, tmp2,
|
|
hi_speed, lo_speed);
|
|
#endif /* HPT343_DEBUG_DRIVE_INFO */
|
|
}
|
|
|
|
static void hpt34x_set_pio_mode(ide_drive_t *drive, const u8 pio)
|
|
{
|
|
hpt34x_set_mode(drive, XFER_PIO_0 + pio);
|
|
}
|
|
|
|
static int hpt34x_config_drive_xfer_rate (ide_drive_t *drive)
|
|
{
|
|
drive->init_speed = 0;
|
|
|
|
if (ide_tune_dma(drive))
|
|
return -1;
|
|
|
|
if (ide_use_fast_pio(drive))
|
|
ide_set_max_pio(drive);
|
|
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* If the BIOS does not set the IO base addaress to XX00, 343 will fail.
|
|
*/
|
|
#define HPT34X_PCI_INIT_REG 0x80
|
|
|
|
static unsigned int __devinit init_chipset_hpt34x(struct pci_dev *dev, const char *name)
|
|
{
|
|
int i = 0;
|
|
unsigned long hpt34xIoBase = pci_resource_start(dev, 4);
|
|
unsigned long hpt_addr[4] = { 0x20, 0x34, 0x28, 0x3c };
|
|
unsigned long hpt_addr_len[4] = { 7, 3, 7, 3 };
|
|
u16 cmd;
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
pci_write_config_byte(dev, HPT34X_PCI_INIT_REG, 0x00);
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
|
|
if (cmd & PCI_COMMAND_MEMORY)
|
|
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0);
|
|
else
|
|
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
|
|
|
|
/*
|
|
* Since 20-23 can be assigned and are R/W, we correct them.
|
|
*/
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd & ~PCI_COMMAND_IO);
|
|
for(i=0; i<4; i++) {
|
|
dev->resource[i].start = (hpt34xIoBase + hpt_addr[i]);
|
|
dev->resource[i].end = dev->resource[i].start + hpt_addr_len[i];
|
|
dev->resource[i].flags = IORESOURCE_IO;
|
|
pci_write_config_dword(dev,
|
|
(PCI_BASE_ADDRESS_0 + (i * 4)),
|
|
dev->resource[i].start);
|
|
}
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
return dev->irq;
|
|
}
|
|
|
|
static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif)
|
|
{
|
|
u16 pcicmd = 0;
|
|
|
|
hwif->autodma = 0;
|
|
|
|
hwif->set_pio_mode = &hpt34x_set_pio_mode;
|
|
hwif->set_dma_mode = &hpt34x_set_mode;
|
|
|
|
hwif->drives[0].autotune = 1;
|
|
hwif->drives[1].autotune = 1;
|
|
|
|
pci_read_config_word(hwif->pci_dev, PCI_COMMAND, &pcicmd);
|
|
|
|
if (!hwif->dma_base)
|
|
return;
|
|
|
|
#ifdef CONFIG_HPT34X_AUTODMA
|
|
hwif->ultra_mask = 0x07;
|
|
hwif->mwdma_mask = 0x07;
|
|
hwif->swdma_mask = 0x07;
|
|
#endif
|
|
|
|
hwif->ide_dma_check = &hpt34x_config_drive_xfer_rate;
|
|
if (!noautodma)
|
|
hwif->autodma = (pcicmd & PCI_COMMAND_MEMORY) ? 1 : 0;
|
|
hwif->drives[0].autodma = hwif->autodma;
|
|
hwif->drives[1].autodma = hwif->autodma;
|
|
}
|
|
|
|
static ide_pci_device_t hpt34x_chipset __devinitdata = {
|
|
.name = "HPT34X",
|
|
.init_chipset = init_chipset_hpt34x,
|
|
.init_hwif = init_hwif_hpt34x,
|
|
.autodma = NOAUTODMA,
|
|
.bootable = NEVER_BOARD,
|
|
.extra = 16,
|
|
.pio_mask = ATA_PIO5,
|
|
};
|
|
|
|
static int __devinit hpt34x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
ide_pci_device_t *d = &hpt34x_chipset;
|
|
static char *chipset_names[] = {"HPT343", "HPT345"};
|
|
u16 pcicmd = 0;
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
|
|
|
|
d->name = chipset_names[(pcicmd & PCI_COMMAND_MEMORY) ? 1 : 0];
|
|
d->bootable = (pcicmd & PCI_COMMAND_MEMORY) ? OFF_BOARD : NEVER_BOARD;
|
|
|
|
return ide_setup_pci_device(dev, d);
|
|
}
|
|
|
|
static struct pci_device_id hpt34x_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT343, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, hpt34x_pci_tbl);
|
|
|
|
static struct pci_driver driver = {
|
|
.name = "HPT34x_IDE",
|
|
.id_table = hpt34x_pci_tbl,
|
|
.probe = hpt34x_init_one,
|
|
};
|
|
|
|
static int __init hpt34x_ide_init(void)
|
|
{
|
|
return ide_pci_register_driver(&driver);
|
|
}
|
|
|
|
module_init(hpt34x_ide_init);
|
|
|
|
MODULE_AUTHOR("Andre Hedrick");
|
|
MODULE_DESCRIPTION("PCI driver module for Highpoint 34x IDE");
|
|
MODULE_LICENSE("GPL");
|