333 lines
9.0 KiB
C
333 lines
9.0 KiB
C
/*
|
|
* linux/drivers/ide/pci/cs5530.c Version 0.75 Aug 2 2007
|
|
*
|
|
* Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org>
|
|
* Copyright (C) 2000 Mark Lord <mlord@pobox.com>
|
|
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
|
|
*
|
|
* May be copied or modified under the terms of the GNU General Public License
|
|
*
|
|
* Development of this chipset driver was funded
|
|
* by the nice folks at National Semiconductor.
|
|
*
|
|
* Documentation:
|
|
* CS5530 documentation available from National Semiconductor.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/hdreg.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ide.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
|
|
/*
|
|
* Here are the standard PIO mode 0-4 timings for each "format".
|
|
* Format-0 uses fast data reg timings, with slower command reg timings.
|
|
* Format-1 uses fast timings for all registers, but won't work with all drives.
|
|
*/
|
|
static unsigned int cs5530_pio_timings[2][5] = {
|
|
{0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010},
|
|
{0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}
|
|
};
|
|
|
|
/*
|
|
* After chip reset, the PIO timings are set to 0x0000e132, which is not valid.
|
|
*/
|
|
#define CS5530_BAD_PIO(timings) (((timings)&~0x80000000)==0x0000e132)
|
|
#define CS5530_BASEREG(hwif) (((hwif)->dma_base & ~0xf) + ((hwif)->channel ? 0x30 : 0x20))
|
|
|
|
/**
|
|
* cs5530_set_pio_mode - set host controller for PIO mode
|
|
* @drive: drive
|
|
* @pio: PIO mode number
|
|
*
|
|
* Handles setting of PIO mode for the chipset.
|
|
*
|
|
* The init_hwif_cs5530() routine guarantees that all drives
|
|
* will have valid default PIO timings set up before we get here.
|
|
*/
|
|
|
|
static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio)
|
|
{
|
|
unsigned long basereg = CS5530_BASEREG(drive->hwif);
|
|
unsigned int format = (inl(basereg + 4) >> 31) & 1;
|
|
|
|
outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3));
|
|
}
|
|
|
|
/**
|
|
* cs5530_udma_filter - UDMA filter
|
|
* @drive: drive
|
|
*
|
|
* cs5530_udma_filter() does UDMA mask filtering for the given drive
|
|
* taking into the consideration capabilities of the mate device.
|
|
*
|
|
* The CS5530 specifies that two drives sharing a cable cannot mix
|
|
* UDMA/MDMA. It has to be one or the other, for the pair, though
|
|
* different timings can still be chosen for each drive. We could
|
|
* set the appropriate timing bits on the fly, but that might be
|
|
* a bit confusing. So, for now we statically handle this requirement
|
|
* by looking at our mate drive to see what it is capable of, before
|
|
* choosing a mode for our own drive.
|
|
*
|
|
* Note: This relies on the fact we never fail from UDMA to MWDMA2
|
|
* but instead drop to PIO.
|
|
*/
|
|
|
|
static u8 cs5530_udma_filter(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1];
|
|
struct hd_driveid *mateid = mate->id;
|
|
u8 mask = hwif->ultra_mask;
|
|
|
|
if (mate->present == 0)
|
|
goto out;
|
|
|
|
if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) {
|
|
if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7))
|
|
goto out;
|
|
if ((mateid->field_valid & 2) && (mateid->dma_mword & 7))
|
|
mask = 0;
|
|
}
|
|
out:
|
|
return mask;
|
|
}
|
|
|
|
/**
|
|
* cs5530_config_dma - set DMA/UDMA mode
|
|
* @drive: drive to tune
|
|
*
|
|
* cs5530_config_dma() handles setting of DMA/UDMA mode
|
|
* for both the chipset and drive.
|
|
*/
|
|
|
|
static int cs5530_config_dma(ide_drive_t *drive)
|
|
{
|
|
if (ide_tune_dma(drive))
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
|
|
{
|
|
unsigned long basereg;
|
|
unsigned int reg, timings = 0;
|
|
|
|
switch (mode) {
|
|
case XFER_UDMA_0: timings = 0x00921250; break;
|
|
case XFER_UDMA_1: timings = 0x00911140; break;
|
|
case XFER_UDMA_2: timings = 0x00911030; break;
|
|
case XFER_MW_DMA_0: timings = 0x00077771; break;
|
|
case XFER_MW_DMA_1: timings = 0x00012121; break;
|
|
case XFER_MW_DMA_2: timings = 0x00002020; break;
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
basereg = CS5530_BASEREG(drive->hwif);
|
|
reg = inl(basereg + 4); /* get drive0 config register */
|
|
timings |= reg & 0x80000000; /* preserve PIO format bit */
|
|
if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */
|
|
outl(timings, basereg + 4); /* write drive0 config register */
|
|
} else {
|
|
if (timings & 0x00100000)
|
|
reg |= 0x00100000; /* enable UDMA timings for both drives */
|
|
else
|
|
reg &= ~0x00100000; /* disable UDMA timings for both drives */
|
|
outl(reg, basereg + 4); /* write drive0 config register */
|
|
outl(timings, basereg + 12); /* write drive1 config register */
|
|
}
|
|
}
|
|
|
|
/**
|
|
* init_chipset_5530 - set up 5530 bridge
|
|
* @dev: PCI device
|
|
* @name: device name
|
|
*
|
|
* Initialize the cs5530 bridge for reliable IDE DMA operation.
|
|
*/
|
|
|
|
static unsigned int __devinit init_chipset_cs5530 (struct pci_dev *dev, const char *name)
|
|
{
|
|
struct pci_dev *master_0 = NULL, *cs5530_0 = NULL;
|
|
unsigned long flags;
|
|
|
|
if (pci_resource_start(dev, 4) == 0)
|
|
return -EFAULT;
|
|
|
|
dev = NULL;
|
|
while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) {
|
|
switch (dev->device) {
|
|
case PCI_DEVICE_ID_CYRIX_PCI_MASTER:
|
|
master_0 = pci_dev_get(dev);
|
|
break;
|
|
case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
|
|
cs5530_0 = pci_dev_get(dev);
|
|
break;
|
|
}
|
|
}
|
|
if (!master_0) {
|
|
printk(KERN_ERR "%s: unable to locate PCI MASTER function\n", name);
|
|
goto out;
|
|
}
|
|
if (!cs5530_0) {
|
|
printk(KERN_ERR "%s: unable to locate CS5530 LEGACY function\n", name);
|
|
goto out;
|
|
}
|
|
|
|
spin_lock_irqsave(&ide_lock, flags);
|
|
/* all CPUs (there should only be one CPU with this chipset) */
|
|
|
|
/*
|
|
* Enable BusMaster and MemoryWriteAndInvalidate for the cs5530:
|
|
* --> OR 0x14 into 16-bit PCI COMMAND reg of function 0 of the cs5530
|
|
*/
|
|
|
|
pci_set_master(cs5530_0);
|
|
pci_try_set_mwi(cs5530_0);
|
|
|
|
/*
|
|
* Set PCI CacheLineSize to 16-bytes:
|
|
* --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530
|
|
*/
|
|
|
|
pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04);
|
|
|
|
/*
|
|
* Disable trapping of UDMA register accesses (Win98 hack):
|
|
* --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530
|
|
*/
|
|
|
|
pci_write_config_word(cs5530_0, 0xd0, 0x5006);
|
|
|
|
/*
|
|
* Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus:
|
|
* The other settings are what is necessary to get the register
|
|
* into a sane state for IDE DMA operation.
|
|
*/
|
|
|
|
pci_write_config_byte(master_0, 0x40, 0x1e);
|
|
|
|
/*
|
|
* Set max PCI burst size (16-bytes seems to work best):
|
|
* 16bytes: set bit-1 at 0x41 (reg value of 0x16)
|
|
* all others: clear bit-1 at 0x41, and do:
|
|
* 128bytes: OR 0x00 at 0x41
|
|
* 256bytes: OR 0x04 at 0x41
|
|
* 512bytes: OR 0x08 at 0x41
|
|
* 1024bytes: OR 0x0c at 0x41
|
|
*/
|
|
|
|
pci_write_config_byte(master_0, 0x41, 0x14);
|
|
|
|
/*
|
|
* These settings are necessary to get the chip
|
|
* into a sane state for IDE DMA operation.
|
|
*/
|
|
|
|
pci_write_config_byte(master_0, 0x42, 0x00);
|
|
pci_write_config_byte(master_0, 0x43, 0xc1);
|
|
|
|
spin_unlock_irqrestore(&ide_lock, flags);
|
|
|
|
out:
|
|
pci_dev_put(master_0);
|
|
pci_dev_put(cs5530_0);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* init_hwif_cs5530 - initialise an IDE channel
|
|
* @hwif: IDE to initialize
|
|
*
|
|
* This gets invoked by the IDE driver once for each channel. It
|
|
* performs channel-specific pre-initialization before drive probing.
|
|
*/
|
|
|
|
static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif)
|
|
{
|
|
unsigned long basereg;
|
|
u32 d0_timings;
|
|
hwif->autodma = 0;
|
|
|
|
if (hwif->mate)
|
|
hwif->serialized = hwif->mate->serialized = 1;
|
|
|
|
hwif->set_pio_mode = &cs5530_set_pio_mode;
|
|
hwif->set_dma_mode = &cs5530_set_dma_mode;
|
|
|
|
basereg = CS5530_BASEREG(hwif);
|
|
d0_timings = inl(basereg + 0);
|
|
if (CS5530_BAD_PIO(d0_timings))
|
|
outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 0);
|
|
if (CS5530_BAD_PIO(inl(basereg + 8)))
|
|
outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 8);
|
|
|
|
hwif->drives[0].autotune = 1;
|
|
hwif->drives[1].autotune = 1;
|
|
|
|
if (hwif->dma_base == 0)
|
|
return;
|
|
|
|
hwif->atapi_dma = 1;
|
|
hwif->ultra_mask = 0x07;
|
|
hwif->mwdma_mask = 0x07;
|
|
|
|
hwif->udma_filter = cs5530_udma_filter;
|
|
hwif->ide_dma_check = &cs5530_config_dma;
|
|
if (!noautodma)
|
|
hwif->autodma = 1;
|
|
hwif->drives[0].autodma = hwif->autodma;
|
|
hwif->drives[1].autodma = hwif->autodma;
|
|
}
|
|
|
|
static ide_pci_device_t cs5530_chipset __devinitdata = {
|
|
.name = "CS5530",
|
|
.init_chipset = init_chipset_cs5530,
|
|
.init_hwif = init_hwif_cs5530,
|
|
.autodma = AUTODMA,
|
|
.bootable = ON_BOARD,
|
|
.pio_mask = ATA_PIO4,
|
|
.host_flags = IDE_HFLAG_POST_SET_MODE,
|
|
};
|
|
|
|
static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
return ide_setup_pci_device(dev, &cs5530_chipset);
|
|
}
|
|
|
|
static struct pci_device_id cs5530_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, cs5530_pci_tbl);
|
|
|
|
static struct pci_driver driver = {
|
|
.name = "CS5530 IDE",
|
|
.id_table = cs5530_pci_tbl,
|
|
.probe = cs5530_init_one,
|
|
};
|
|
|
|
static int __init cs5530_ide_init(void)
|
|
{
|
|
return ide_pci_register_driver(&driver);
|
|
}
|
|
|
|
module_init(cs5530_ide_init);
|
|
|
|
MODULE_AUTHOR("Mark Lord");
|
|
MODULE_DESCRIPTION("PCI driver module for Cyrix/NS 5530 IDE");
|
|
MODULE_LICENSE("GPL");
|