792 lines
19 KiB
C
792 lines
19 KiB
C
/*
|
|
* Marvell Orion SPI controller driver
|
|
*
|
|
* Author: Shadi Ammouri <shadi@marvell.com>
|
|
* Copyright (C) 2007-2008 Marvell Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/sizes.h>
|
|
#include <linux/gpio.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#define DRIVER_NAME "orion_spi"
|
|
|
|
/* Runtime PM autosuspend timeout: PM is fairly light on this driver */
|
|
#define SPI_AUTOSUSPEND_TIMEOUT 200
|
|
|
|
/* Some SoCs using this driver support up to 8 chip selects.
|
|
* It is up to the implementer to only use the chip selects
|
|
* that are available.
|
|
*/
|
|
#define ORION_NUM_CHIPSELECTS 8
|
|
|
|
#define ORION_SPI_WAIT_RDY_MAX_LOOP 2000 /* in usec */
|
|
|
|
#define ORION_SPI_IF_CTRL_REG 0x00
|
|
#define ORION_SPI_IF_CONFIG_REG 0x04
|
|
#define ORION_SPI_IF_RXLSBF BIT(14)
|
|
#define ORION_SPI_IF_TXLSBF BIT(13)
|
|
#define ORION_SPI_DATA_OUT_REG 0x08
|
|
#define ORION_SPI_DATA_IN_REG 0x0c
|
|
#define ORION_SPI_INT_CAUSE_REG 0x10
|
|
#define ORION_SPI_TIMING_PARAMS_REG 0x18
|
|
|
|
/* Register for the "Direct Mode" */
|
|
#define SPI_DIRECT_WRITE_CONFIG_REG 0x20
|
|
|
|
#define ORION_SPI_TMISO_SAMPLE_MASK (0x3 << 6)
|
|
#define ORION_SPI_TMISO_SAMPLE_1 (1 << 6)
|
|
#define ORION_SPI_TMISO_SAMPLE_2 (2 << 6)
|
|
|
|
#define ORION_SPI_MODE_CPOL (1 << 11)
|
|
#define ORION_SPI_MODE_CPHA (1 << 12)
|
|
#define ORION_SPI_IF_8_16_BIT_MODE (1 << 5)
|
|
#define ORION_SPI_CLK_PRESCALE_MASK 0x1F
|
|
#define ARMADA_SPI_CLK_PRESCALE_MASK 0xDF
|
|
#define ORION_SPI_MODE_MASK (ORION_SPI_MODE_CPOL | \
|
|
ORION_SPI_MODE_CPHA)
|
|
#define ORION_SPI_CS_MASK 0x1C
|
|
#define ORION_SPI_CS_SHIFT 2
|
|
#define ORION_SPI_CS(cs) ((cs << ORION_SPI_CS_SHIFT) & \
|
|
ORION_SPI_CS_MASK)
|
|
|
|
enum orion_spi_type {
|
|
ORION_SPI,
|
|
ARMADA_SPI,
|
|
};
|
|
|
|
struct orion_spi_dev {
|
|
enum orion_spi_type typ;
|
|
/*
|
|
* min_divisor and max_hz should be exclusive, the only we can
|
|
* have both is for managing the armada-370-spi case with old
|
|
* device tree
|
|
*/
|
|
unsigned long max_hz;
|
|
unsigned int min_divisor;
|
|
unsigned int max_divisor;
|
|
u32 prescale_mask;
|
|
bool is_errata_50mhz_ac;
|
|
};
|
|
|
|
struct orion_direct_acc {
|
|
void __iomem *vaddr;
|
|
u32 size;
|
|
};
|
|
|
|
struct orion_spi {
|
|
struct spi_master *master;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
const struct orion_spi_dev *devdata;
|
|
|
|
struct orion_direct_acc direct_access[ORION_NUM_CHIPSELECTS];
|
|
};
|
|
|
|
static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg)
|
|
{
|
|
return orion_spi->base + reg;
|
|
}
|
|
|
|
static inline void
|
|
orion_spi_setbits(struct orion_spi *orion_spi, u32 reg, u32 mask)
|
|
{
|
|
void __iomem *reg_addr = spi_reg(orion_spi, reg);
|
|
u32 val;
|
|
|
|
val = readl(reg_addr);
|
|
val |= mask;
|
|
writel(val, reg_addr);
|
|
}
|
|
|
|
static inline void
|
|
orion_spi_clrbits(struct orion_spi *orion_spi, u32 reg, u32 mask)
|
|
{
|
|
void __iomem *reg_addr = spi_reg(orion_spi, reg);
|
|
u32 val;
|
|
|
|
val = readl(reg_addr);
|
|
val &= ~mask;
|
|
writel(val, reg_addr);
|
|
}
|
|
|
|
static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
|
|
{
|
|
u32 tclk_hz;
|
|
u32 rate;
|
|
u32 prescale;
|
|
u32 reg;
|
|
struct orion_spi *orion_spi;
|
|
const struct orion_spi_dev *devdata;
|
|
|
|
orion_spi = spi_master_get_devdata(spi->master);
|
|
devdata = orion_spi->devdata;
|
|
|
|
tclk_hz = clk_get_rate(orion_spi->clk);
|
|
|
|
if (devdata->typ == ARMADA_SPI) {
|
|
/*
|
|
* Given the core_clk (tclk_hz) and the target rate (speed) we
|
|
* determine the best values for SPR (in [0 .. 15]) and SPPR (in
|
|
* [0..7]) such that
|
|
*
|
|
* core_clk / (SPR * 2 ** SPPR)
|
|
*
|
|
* is as big as possible but not bigger than speed.
|
|
*/
|
|
|
|
/* best integer divider: */
|
|
unsigned divider = DIV_ROUND_UP(tclk_hz, speed);
|
|
unsigned spr, sppr;
|
|
|
|
if (divider < 16) {
|
|
/* This is the easy case, divider is less than 16 */
|
|
spr = divider;
|
|
sppr = 0;
|
|
|
|
} else {
|
|
unsigned two_pow_sppr;
|
|
/*
|
|
* Find the highest bit set in divider. This and the
|
|
* three next bits define SPR (apart from rounding).
|
|
* SPPR is then the number of zero bits that must be
|
|
* appended:
|
|
*/
|
|
sppr = fls(divider) - 4;
|
|
|
|
/*
|
|
* As SPR only has 4 bits, we have to round divider up
|
|
* to the next multiple of 2 ** sppr.
|
|
*/
|
|
two_pow_sppr = 1 << sppr;
|
|
divider = (divider + two_pow_sppr - 1) & -two_pow_sppr;
|
|
|
|
/*
|
|
* recalculate sppr as rounding up divider might have
|
|
* increased it enough to change the position of the
|
|
* highest set bit. In this case the bit that now
|
|
* doesn't make it into SPR is 0, so there is no need to
|
|
* round again.
|
|
*/
|
|
sppr = fls(divider) - 4;
|
|
spr = divider >> sppr;
|
|
|
|
/*
|
|
* Now do range checking. SPR is constructed to have a
|
|
* width of 4 bits, so this is fine for sure. So we
|
|
* still need to check for sppr to fit into 3 bits:
|
|
*/
|
|
if (sppr > 7)
|
|
return -EINVAL;
|
|
}
|
|
|
|
prescale = ((sppr & 0x6) << 5) | ((sppr & 0x1) << 4) | spr;
|
|
} else {
|
|
/*
|
|
* the supported rates are: 4,6,8...30
|
|
* round up as we look for equal or less speed
|
|
*/
|
|
rate = DIV_ROUND_UP(tclk_hz, speed);
|
|
rate = roundup(rate, 2);
|
|
|
|
/* check if requested speed is too small */
|
|
if (rate > 30)
|
|
return -EINVAL;
|
|
|
|
if (rate < 4)
|
|
rate = 4;
|
|
|
|
/* Convert the rate to SPI clock divisor value. */
|
|
prescale = 0x10 + rate/2;
|
|
}
|
|
|
|
reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
|
|
reg = ((reg & ~devdata->prescale_mask) | prescale);
|
|
writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
orion_spi_mode_set(struct spi_device *spi)
|
|
{
|
|
u32 reg;
|
|
struct orion_spi *orion_spi;
|
|
|
|
orion_spi = spi_master_get_devdata(spi->master);
|
|
|
|
reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
|
|
reg &= ~ORION_SPI_MODE_MASK;
|
|
if (spi->mode & SPI_CPOL)
|
|
reg |= ORION_SPI_MODE_CPOL;
|
|
if (spi->mode & SPI_CPHA)
|
|
reg |= ORION_SPI_MODE_CPHA;
|
|
if (spi->mode & SPI_LSB_FIRST)
|
|
reg |= ORION_SPI_IF_RXLSBF | ORION_SPI_IF_TXLSBF;
|
|
else
|
|
reg &= ~(ORION_SPI_IF_RXLSBF | ORION_SPI_IF_TXLSBF);
|
|
|
|
writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
|
|
}
|
|
|
|
static void
|
|
orion_spi_50mhz_ac_timing_erratum(struct spi_device *spi, unsigned int speed)
|
|
{
|
|
u32 reg;
|
|
struct orion_spi *orion_spi;
|
|
|
|
orion_spi = spi_master_get_devdata(spi->master);
|
|
|
|
/*
|
|
* Erratum description: (Erratum NO. FE-9144572) The device
|
|
* SPI interface supports frequencies of up to 50 MHz.
|
|
* However, due to this erratum, when the device core clock is
|
|
* 250 MHz and the SPI interfaces is configured for 50MHz SPI
|
|
* clock and CPOL=CPHA=1 there might occur data corruption on
|
|
* reads from the SPI device.
|
|
* Erratum Workaround:
|
|
* Work in one of the following configurations:
|
|
* 1. Set CPOL=CPHA=0 in "SPI Interface Configuration
|
|
* Register".
|
|
* 2. Set TMISO_SAMPLE value to 0x2 in "SPI Timing Parameters 1
|
|
* Register" before setting the interface.
|
|
*/
|
|
reg = readl(spi_reg(orion_spi, ORION_SPI_TIMING_PARAMS_REG));
|
|
reg &= ~ORION_SPI_TMISO_SAMPLE_MASK;
|
|
|
|
if (clk_get_rate(orion_spi->clk) == 250000000 &&
|
|
speed == 50000000 && spi->mode & SPI_CPOL &&
|
|
spi->mode & SPI_CPHA)
|
|
reg |= ORION_SPI_TMISO_SAMPLE_2;
|
|
else
|
|
reg |= ORION_SPI_TMISO_SAMPLE_1; /* This is the default value */
|
|
|
|
writel(reg, spi_reg(orion_spi, ORION_SPI_TIMING_PARAMS_REG));
|
|
}
|
|
|
|
/*
|
|
* called only when no transfer is active on the bus
|
|
*/
|
|
static int
|
|
orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
|
|
{
|
|
struct orion_spi *orion_spi;
|
|
unsigned int speed = spi->max_speed_hz;
|
|
unsigned int bits_per_word = spi->bits_per_word;
|
|
int rc;
|
|
|
|
orion_spi = spi_master_get_devdata(spi->master);
|
|
|
|
if ((t != NULL) && t->speed_hz)
|
|
speed = t->speed_hz;
|
|
|
|
if ((t != NULL) && t->bits_per_word)
|
|
bits_per_word = t->bits_per_word;
|
|
|
|
orion_spi_mode_set(spi);
|
|
|
|
if (orion_spi->devdata->is_errata_50mhz_ac)
|
|
orion_spi_50mhz_ac_timing_erratum(spi, speed);
|
|
|
|
rc = orion_spi_baudrate_set(spi, speed);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (bits_per_word == 16)
|
|
orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
|
|
ORION_SPI_IF_8_16_BIT_MODE);
|
|
else
|
|
orion_spi_clrbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
|
|
ORION_SPI_IF_8_16_BIT_MODE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void orion_spi_set_cs(struct spi_device *spi, bool enable)
|
|
{
|
|
struct orion_spi *orion_spi;
|
|
int cs;
|
|
|
|
if (gpio_is_valid(spi->cs_gpio))
|
|
cs = 0;
|
|
else
|
|
cs = spi->chip_select;
|
|
|
|
orion_spi = spi_master_get_devdata(spi->master);
|
|
|
|
orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, ORION_SPI_CS_MASK);
|
|
orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG,
|
|
ORION_SPI_CS(cs));
|
|
|
|
/* Chip select logic is inverted from spi_set_cs */
|
|
if (!enable)
|
|
orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
|
|
else
|
|
orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
|
|
}
|
|
|
|
static inline int orion_spi_wait_till_ready(struct orion_spi *orion_spi)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ORION_SPI_WAIT_RDY_MAX_LOOP; i++) {
|
|
if (readl(spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG)))
|
|
return 1;
|
|
|
|
udelay(1);
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static inline int
|
|
orion_spi_write_read_8bit(struct spi_device *spi,
|
|
const u8 **tx_buf, u8 **rx_buf)
|
|
{
|
|
void __iomem *tx_reg, *rx_reg, *int_reg;
|
|
struct orion_spi *orion_spi;
|
|
|
|
orion_spi = spi_master_get_devdata(spi->master);
|
|
tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG);
|
|
rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG);
|
|
int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG);
|
|
|
|
/* clear the interrupt cause register */
|
|
writel(0x0, int_reg);
|
|
|
|
if (tx_buf && *tx_buf)
|
|
writel(*(*tx_buf)++, tx_reg);
|
|
else
|
|
writel(0, tx_reg);
|
|
|
|
if (orion_spi_wait_till_ready(orion_spi) < 0) {
|
|
dev_err(&spi->dev, "TXS timed out\n");
|
|
return -1;
|
|
}
|
|
|
|
if (rx_buf && *rx_buf)
|
|
*(*rx_buf)++ = readl(rx_reg);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static inline int
|
|
orion_spi_write_read_16bit(struct spi_device *spi,
|
|
const u16 **tx_buf, u16 **rx_buf)
|
|
{
|
|
void __iomem *tx_reg, *rx_reg, *int_reg;
|
|
struct orion_spi *orion_spi;
|
|
|
|
orion_spi = spi_master_get_devdata(spi->master);
|
|
tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG);
|
|
rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG);
|
|
int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG);
|
|
|
|
/* clear the interrupt cause register */
|
|
writel(0x0, int_reg);
|
|
|
|
if (tx_buf && *tx_buf)
|
|
writel(__cpu_to_le16(get_unaligned((*tx_buf)++)), tx_reg);
|
|
else
|
|
writel(0, tx_reg);
|
|
|
|
if (orion_spi_wait_till_ready(orion_spi) < 0) {
|
|
dev_err(&spi->dev, "TXS timed out\n");
|
|
return -1;
|
|
}
|
|
|
|
if (rx_buf && *rx_buf)
|
|
put_unaligned(__le16_to_cpu(readl(rx_reg)), (*rx_buf)++);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static unsigned int
|
|
orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
|
|
{
|
|
unsigned int count;
|
|
int word_len;
|
|
struct orion_spi *orion_spi;
|
|
int cs = spi->chip_select;
|
|
|
|
word_len = spi->bits_per_word;
|
|
count = xfer->len;
|
|
|
|
orion_spi = spi_master_get_devdata(spi->master);
|
|
|
|
/*
|
|
* Use SPI direct write mode if base address is available. Otherwise
|
|
* fall back to PIO mode for this transfer.
|
|
*/
|
|
if ((orion_spi->direct_access[cs].vaddr) && (xfer->tx_buf) &&
|
|
(word_len == 8)) {
|
|
unsigned int cnt = count / 4;
|
|
unsigned int rem = count % 4;
|
|
|
|
/*
|
|
* Send the TX-data to the SPI device via the direct
|
|
* mapped address window
|
|
*/
|
|
iowrite32_rep(orion_spi->direct_access[cs].vaddr,
|
|
xfer->tx_buf, cnt);
|
|
if (rem) {
|
|
u32 *buf = (u32 *)xfer->tx_buf;
|
|
|
|
iowrite8_rep(orion_spi->direct_access[cs].vaddr,
|
|
&buf[cnt], rem);
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
if (word_len == 8) {
|
|
const u8 *tx = xfer->tx_buf;
|
|
u8 *rx = xfer->rx_buf;
|
|
|
|
do {
|
|
if (orion_spi_write_read_8bit(spi, &tx, &rx) < 0)
|
|
goto out;
|
|
count--;
|
|
} while (count);
|
|
} else if (word_len == 16) {
|
|
const u16 *tx = xfer->tx_buf;
|
|
u16 *rx = xfer->rx_buf;
|
|
|
|
do {
|
|
if (orion_spi_write_read_16bit(spi, &tx, &rx) < 0)
|
|
goto out;
|
|
count -= 2;
|
|
} while (count);
|
|
}
|
|
|
|
out:
|
|
return xfer->len - count;
|
|
}
|
|
|
|
static int orion_spi_transfer_one(struct spi_master *master,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *t)
|
|
{
|
|
int status = 0;
|
|
|
|
status = orion_spi_setup_transfer(spi, t);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
if (t->len)
|
|
orion_spi_write_read(spi, t);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int orion_spi_setup(struct spi_device *spi)
|
|
{
|
|
return orion_spi_setup_transfer(spi, NULL);
|
|
}
|
|
|
|
static int orion_spi_reset(struct orion_spi *orion_spi)
|
|
{
|
|
/* Verify that the CS is deasserted */
|
|
orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
|
|
|
|
/* Don't deassert CS between the direct mapped SPI transfers */
|
|
writel(0, spi_reg(orion_spi, SPI_DIRECT_WRITE_CONFIG_REG));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct orion_spi_dev orion_spi_dev_data = {
|
|
.typ = ORION_SPI,
|
|
.min_divisor = 4,
|
|
.max_divisor = 30,
|
|
.prescale_mask = ORION_SPI_CLK_PRESCALE_MASK,
|
|
};
|
|
|
|
static const struct orion_spi_dev armada_370_spi_dev_data = {
|
|
.typ = ARMADA_SPI,
|
|
.min_divisor = 4,
|
|
.max_divisor = 1920,
|
|
.max_hz = 50000000,
|
|
.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
|
|
};
|
|
|
|
static const struct orion_spi_dev armada_xp_spi_dev_data = {
|
|
.typ = ARMADA_SPI,
|
|
.max_hz = 50000000,
|
|
.max_divisor = 1920,
|
|
.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
|
|
};
|
|
|
|
static const struct orion_spi_dev armada_375_spi_dev_data = {
|
|
.typ = ARMADA_SPI,
|
|
.min_divisor = 15,
|
|
.max_divisor = 1920,
|
|
.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
|
|
};
|
|
|
|
static const struct orion_spi_dev armada_380_spi_dev_data = {
|
|
.typ = ARMADA_SPI,
|
|
.max_hz = 50000000,
|
|
.max_divisor = 1920,
|
|
.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
|
|
.is_errata_50mhz_ac = true,
|
|
};
|
|
|
|
static const struct of_device_id orion_spi_of_match_table[] = {
|
|
{
|
|
.compatible = "marvell,orion-spi",
|
|
.data = &orion_spi_dev_data,
|
|
},
|
|
{
|
|
.compatible = "marvell,armada-370-spi",
|
|
.data = &armada_370_spi_dev_data,
|
|
},
|
|
{
|
|
.compatible = "marvell,armada-375-spi",
|
|
.data = &armada_375_spi_dev_data,
|
|
},
|
|
{
|
|
.compatible = "marvell,armada-380-spi",
|
|
.data = &armada_380_spi_dev_data,
|
|
},
|
|
{
|
|
.compatible = "marvell,armada-390-spi",
|
|
.data = &armada_xp_spi_dev_data,
|
|
},
|
|
{
|
|
.compatible = "marvell,armada-xp-spi",
|
|
.data = &armada_xp_spi_dev_data,
|
|
},
|
|
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, orion_spi_of_match_table);
|
|
|
|
static int orion_spi_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *of_id;
|
|
const struct orion_spi_dev *devdata;
|
|
struct spi_master *master;
|
|
struct orion_spi *spi;
|
|
struct resource *r;
|
|
unsigned long tclk_hz;
|
|
int status = 0;
|
|
struct device_node *np;
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof(*spi));
|
|
if (master == NULL) {
|
|
dev_dbg(&pdev->dev, "master allocation failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (pdev->id != -1)
|
|
master->bus_num = pdev->id;
|
|
if (pdev->dev.of_node) {
|
|
u32 cell_index;
|
|
|
|
if (!of_property_read_u32(pdev->dev.of_node, "cell-index",
|
|
&cell_index))
|
|
master->bus_num = cell_index;
|
|
}
|
|
|
|
/* we support all 4 SPI modes and LSB first option */
|
|
master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST;
|
|
master->set_cs = orion_spi_set_cs;
|
|
master->transfer_one = orion_spi_transfer_one;
|
|
master->num_chipselect = ORION_NUM_CHIPSELECTS;
|
|
master->setup = orion_spi_setup;
|
|
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
|
|
master->auto_runtime_pm = true;
|
|
master->flags = SPI_MASTER_GPIO_SS;
|
|
|
|
platform_set_drvdata(pdev, master);
|
|
|
|
spi = spi_master_get_devdata(master);
|
|
spi->master = master;
|
|
|
|
of_id = of_match_device(orion_spi_of_match_table, &pdev->dev);
|
|
devdata = (of_id) ? of_id->data : &orion_spi_dev_data;
|
|
spi->devdata = devdata;
|
|
|
|
spi->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(spi->clk)) {
|
|
status = PTR_ERR(spi->clk);
|
|
goto out;
|
|
}
|
|
|
|
status = clk_prepare_enable(spi->clk);
|
|
if (status)
|
|
goto out;
|
|
|
|
tclk_hz = clk_get_rate(spi->clk);
|
|
|
|
/*
|
|
* With old device tree, armada-370-spi could be used with
|
|
* Armada XP, however for this SoC the maximum frequency is
|
|
* 50MHz instead of tclk/4. On Armada 370, tclk cannot be
|
|
* higher than 200MHz. So, in order to be able to handle both
|
|
* SoCs, we can take the minimum of 50MHz and tclk/4.
|
|
*/
|
|
if (of_device_is_compatible(pdev->dev.of_node,
|
|
"marvell,armada-370-spi"))
|
|
master->max_speed_hz = min(devdata->max_hz,
|
|
DIV_ROUND_UP(tclk_hz, devdata->min_divisor));
|
|
else if (devdata->min_divisor)
|
|
master->max_speed_hz =
|
|
DIV_ROUND_UP(tclk_hz, devdata->min_divisor);
|
|
else
|
|
master->max_speed_hz = devdata->max_hz;
|
|
master->min_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->max_divisor);
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
spi->base = devm_ioremap_resource(&pdev->dev, r);
|
|
if (IS_ERR(spi->base)) {
|
|
status = PTR_ERR(spi->base);
|
|
goto out_rel_clk;
|
|
}
|
|
|
|
/* Scan all SPI devices of this controller for direct mapped devices */
|
|
for_each_available_child_of_node(pdev->dev.of_node, np) {
|
|
u32 cs;
|
|
|
|
/* Get chip-select number from the "reg" property */
|
|
status = of_property_read_u32(np, "reg", &cs);
|
|
if (status) {
|
|
dev_err(&pdev->dev,
|
|
"%s has no valid 'reg' property (%d)\n",
|
|
np->full_name, status);
|
|
status = 0;
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* Check if an address is configured for this SPI device. If
|
|
* not, the MBus mapping via the 'ranges' property in the 'soc'
|
|
* node is not configured and this device should not use the
|
|
* direct mode. In this case, just continue with the next
|
|
* device.
|
|
*/
|
|
status = of_address_to_resource(pdev->dev.of_node, cs + 1, r);
|
|
if (status)
|
|
continue;
|
|
|
|
/*
|
|
* Only map one page for direct access. This is enough for the
|
|
* simple TX transfer which only writes to the first word.
|
|
* This needs to get extended for the direct SPI-NOR / SPI-NAND
|
|
* support, once this gets implemented.
|
|
*/
|
|
spi->direct_access[cs].vaddr = devm_ioremap(&pdev->dev,
|
|
r->start,
|
|
PAGE_SIZE);
|
|
if (!spi->direct_access[cs].vaddr) {
|
|
status = -ENOMEM;
|
|
goto out_rel_clk;
|
|
}
|
|
spi->direct_access[cs].size = PAGE_SIZE;
|
|
|
|
dev_info(&pdev->dev, "CS%d configured for direct access\n", cs);
|
|
}
|
|
|
|
pm_runtime_set_active(&pdev->dev);
|
|
pm_runtime_use_autosuspend(&pdev->dev);
|
|
pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
status = orion_spi_reset(spi);
|
|
if (status < 0)
|
|
goto out_rel_pm;
|
|
|
|
pm_runtime_mark_last_busy(&pdev->dev);
|
|
pm_runtime_put_autosuspend(&pdev->dev);
|
|
|
|
master->dev.of_node = pdev->dev.of_node;
|
|
status = spi_register_master(master);
|
|
if (status < 0)
|
|
goto out_rel_pm;
|
|
|
|
return status;
|
|
|
|
out_rel_pm:
|
|
pm_runtime_disable(&pdev->dev);
|
|
out_rel_clk:
|
|
clk_disable_unprepare(spi->clk);
|
|
out:
|
|
spi_master_put(master);
|
|
return status;
|
|
}
|
|
|
|
|
|
static int orion_spi_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master = platform_get_drvdata(pdev);
|
|
struct orion_spi *spi = spi_master_get_devdata(master);
|
|
|
|
pm_runtime_get_sync(&pdev->dev);
|
|
clk_disable_unprepare(spi->clk);
|
|
|
|
spi_unregister_master(master);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|
|
|
|
#ifdef CONFIG_PM
|
|
static int orion_spi_runtime_suspend(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct orion_spi *spi = spi_master_get_devdata(master);
|
|
|
|
clk_disable_unprepare(spi->clk);
|
|
return 0;
|
|
}
|
|
|
|
static int orion_spi_runtime_resume(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct orion_spi *spi = spi_master_get_devdata(master);
|
|
|
|
return clk_prepare_enable(spi->clk);
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops orion_spi_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(orion_spi_runtime_suspend,
|
|
orion_spi_runtime_resume,
|
|
NULL)
|
|
};
|
|
|
|
static struct platform_driver orion_spi_driver = {
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.pm = &orion_spi_pm_ops,
|
|
.of_match_table = of_match_ptr(orion_spi_of_match_table),
|
|
},
|
|
.probe = orion_spi_probe,
|
|
.remove = orion_spi_remove,
|
|
};
|
|
|
|
module_platform_driver(orion_spi_driver);
|
|
|
|
MODULE_DESCRIPTION("Orion SPI driver");
|
|
MODULE_AUTHOR("Shadi Ammouri <shadi@marvell.com>");
|
|
MODULE_LICENSE("GPL");
|