OpenCloudOS-Kernel/drivers/i2c/busses/i2c-designware-platdrv.c

423 lines
11 KiB
C

/*
* Synopsys DesignWare I2C adapter driver (master only).
*
* Based on the TI DAVINCI I2C adapter driver.
*
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2007 MontaVista Software Inc.
* Copyright (C) 2009 Provigent Ltd.
*
* ----------------------------------------------------------------------------
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* ----------------------------------------------------------------------------
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/dmi.h>
#include <linux/i2c.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
#include <linux/io.h>
#include <linux/reset.h>
#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/platform_data/i2c-designware.h>
#include "i2c-designware-core.h"
static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
{
return clk_get_rate(dev->clk)/1000;
}
#ifdef CONFIG_ACPI
/*
* The HCNT/LCNT information coming from ACPI should be the most accurate
* for given platform. However, some systems get it wrong. On such systems
* we get better results by calculating those based on the input clock.
*/
static const struct dmi_system_id dw_i2c_no_acpi_params[] = {
{
.ident = "Dell Inspiron 7348",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7348"),
},
},
{ }
};
static void dw_i2c_acpi_params(struct platform_device *pdev, char method[],
u16 *hcnt, u16 *lcnt, u32 *sda_hold)
{
struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
acpi_handle handle = ACPI_HANDLE(&pdev->dev);
union acpi_object *obj;
if (dmi_check_system(dw_i2c_no_acpi_params))
return;
if (ACPI_FAILURE(acpi_evaluate_object(handle, method, NULL, &buf)))
return;
obj = (union acpi_object *)buf.pointer;
if (obj->type == ACPI_TYPE_PACKAGE && obj->package.count == 3) {
const union acpi_object *objs = obj->package.elements;
*hcnt = (u16)objs[0].integer.value;
*lcnt = (u16)objs[1].integer.value;
if (sda_hold)
*sda_hold = (u32)objs[2].integer.value;
}
kfree(buf.pointer);
}
static int dw_i2c_acpi_configure(struct platform_device *pdev)
{
struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
const struct acpi_device_id *id;
dev->adapter.nr = -1;
dev->tx_fifo_depth = 32;
dev->rx_fifo_depth = 32;
/*
* Try to get SDA hold time and *CNT values from an ACPI method if
* it exists for both supported speed modes.
*/
dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, NULL);
dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt,
&dev->sda_hold_time);
dw_i2c_acpi_params(pdev, "FPCN", &dev->fp_hcnt, &dev->fp_lcnt, NULL);
dw_i2c_acpi_params(pdev, "HSCN", &dev->hs_hcnt, &dev->hs_lcnt, NULL);
id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
if (id && id->driver_data)
dev->accessor_flags |= (u32)id->driver_data;
return 0;
}
static const struct acpi_device_id dw_i2c_acpi_match[] = {
{ "INT33C2", 0 },
{ "INT33C3", 0 },
{ "INT3432", 0 },
{ "INT3433", 0 },
{ "80860F41", 0 },
{ "808622C1", 0 },
{ "AMD0010", ACCESS_INTR_MASK },
{ "AMDI0010", ACCESS_INTR_MASK },
{ "AMDI0510", 0 },
{ "APMC0D0F", 0 },
{ }
};
MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
#else
static inline int dw_i2c_acpi_configure(struct platform_device *pdev)
{
return -ENODEV;
}
#endif
static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare)
{
if (IS_ERR(i_dev->clk))
return PTR_ERR(i_dev->clk);
if (prepare)
return clk_prepare_enable(i_dev->clk);
clk_disable_unprepare(i_dev->clk);
return 0;
}
static void dw_i2c_set_fifo_size(struct dw_i2c_dev *dev, int id)
{
u32 param, tx_fifo_depth, rx_fifo_depth;
/*
* Try to detect the FIFO depth if not set by interface driver,
* the depth could be from 2 to 256 from HW spec.
*/
param = i2c_dw_read_comp_param(dev);
tx_fifo_depth = ((param >> 16) & 0xff) + 1;
rx_fifo_depth = ((param >> 8) & 0xff) + 1;
if (!dev->tx_fifo_depth) {
dev->tx_fifo_depth = tx_fifo_depth;
dev->rx_fifo_depth = rx_fifo_depth;
dev->adapter.nr = id;
} else if (tx_fifo_depth >= 2) {
dev->tx_fifo_depth = min_t(u32, dev->tx_fifo_depth,
tx_fifo_depth);
dev->rx_fifo_depth = min_t(u32, dev->rx_fifo_depth,
rx_fifo_depth);
}
}
static int dw_i2c_plat_probe(struct platform_device *pdev)
{
struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct dw_i2c_dev *dev;
struct i2c_adapter *adap;
struct resource *mem;
int irq, r;
u32 acpi_speed, ht = 0;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dev->base = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(dev->base))
return PTR_ERR(dev->base);
dev->dev = &pdev->dev;
dev->irq = irq;
platform_set_drvdata(pdev, dev);
dev->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
if (IS_ERR(dev->rst)) {
if (PTR_ERR(dev->rst) == -EPROBE_DEFER)
return -EPROBE_DEFER;
} else {
reset_control_deassert(dev->rst);
}
if (pdata) {
dev->clk_freq = pdata->i2c_scl_freq;
} else {
device_property_read_u32(&pdev->dev, "i2c-sda-hold-time-ns",
&ht);
device_property_read_u32(&pdev->dev, "i2c-sda-falling-time-ns",
&dev->sda_falling_time);
device_property_read_u32(&pdev->dev, "i2c-scl-falling-time-ns",
&dev->scl_falling_time);
device_property_read_u32(&pdev->dev, "clock-frequency",
&dev->clk_freq);
}
acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev);
/*
* Find bus speed from the "clock-frequency" device property, ACPI
* or by using fast mode if neither is set.
*/
if (acpi_speed && dev->clk_freq)
dev->clk_freq = min(dev->clk_freq, acpi_speed);
else if (acpi_speed || dev->clk_freq)
dev->clk_freq = max(dev->clk_freq, acpi_speed);
else
dev->clk_freq = 400000;
if (has_acpi_companion(&pdev->dev))
dw_i2c_acpi_configure(pdev);
/*
* Only standard mode at 100kHz, fast mode at 400kHz,
* fast mode plus at 1MHz and high speed mode at 3.4MHz are supported.
*/
if (dev->clk_freq != 100000 && dev->clk_freq != 400000
&& dev->clk_freq != 1000000 && dev->clk_freq != 3400000) {
dev_err(&pdev->dev,
"Only 100kHz, 400kHz, 1MHz and 3.4MHz supported");
r = -EINVAL;
goto exit_reset;
}
r = i2c_dw_eval_lock_support(dev);
if (r)
goto exit_reset;
dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
DW_IC_CON_RESTART_EN;
switch (dev->clk_freq) {
case 100000:
dev->master_cfg |= DW_IC_CON_SPEED_STD;
break;
case 3400000:
dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
break;
default:
dev->master_cfg |= DW_IC_CON_SPEED_FAST;
}
dev->clk = devm_clk_get(&pdev->dev, NULL);
if (!i2c_dw_plat_prepare_clk(dev, true)) {
dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
if (!dev->sda_hold_time && ht)
dev->sda_hold_time = div_u64(
(u64)dev->get_clk_rate_khz(dev) * ht + 500000,
1000000);
}
dw_i2c_set_fifo_size(dev, pdev->id);
adap = &dev->adapter;
adap->owner = THIS_MODULE;
adap->class = I2C_CLASS_DEPRECATED;
ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
adap->dev.of_node = pdev->dev.of_node;
if (dev->pm_runtime_disabled) {
pm_runtime_forbid(&pdev->dev);
} else {
pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
}
r = i2c_dw_probe(dev);
if (r)
goto exit_probe;
return r;
exit_probe:
if (!dev->pm_runtime_disabled)
pm_runtime_disable(&pdev->dev);
exit_reset:
if (!IS_ERR_OR_NULL(dev->rst))
reset_control_assert(dev->rst);
return r;
}
static int dw_i2c_plat_remove(struct platform_device *pdev)
{
struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
pm_runtime_get_sync(&pdev->dev);
i2c_del_adapter(&dev->adapter);
i2c_dw_disable(dev);
pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_put_sync(&pdev->dev);
if (!dev->pm_runtime_disabled)
pm_runtime_disable(&pdev->dev);
if (!IS_ERR_OR_NULL(dev->rst))
reset_control_assert(dev->rst);
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id dw_i2c_of_match[] = {
{ .compatible = "snps,designware-i2c", },
{},
};
MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
#endif
#ifdef CONFIG_PM_SLEEP
static int dw_i2c_plat_prepare(struct device *dev)
{
return pm_runtime_suspended(dev);
}
static void dw_i2c_plat_complete(struct device *dev)
{
if (dev->power.direct_complete)
pm_request_resume(dev);
}
#else
#define dw_i2c_plat_prepare NULL
#define dw_i2c_plat_complete NULL
#endif
#ifdef CONFIG_PM
static int dw_i2c_plat_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
i2c_dw_disable(i_dev);
i2c_dw_plat_prepare_clk(i_dev, false);
return 0;
}
static int dw_i2c_plat_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
i2c_dw_plat_prepare_clk(i_dev, true);
if (!i_dev->pm_runtime_disabled)
i2c_dw_init(i_dev);
return 0;
}
static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
.prepare = dw_i2c_plat_prepare,
.complete = dw_i2c_plat_complete,
SET_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
SET_RUNTIME_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume, NULL)
};
#define DW_I2C_DEV_PMOPS (&dw_i2c_dev_pm_ops)
#else
#define DW_I2C_DEV_PMOPS NULL
#endif
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:i2c_designware");
static struct platform_driver dw_i2c_driver = {
.probe = dw_i2c_plat_probe,
.remove = dw_i2c_plat_remove,
.driver = {
.name = "i2c_designware",
.of_match_table = of_match_ptr(dw_i2c_of_match),
.acpi_match_table = ACPI_PTR(dw_i2c_acpi_match),
.pm = DW_I2C_DEV_PMOPS,
},
};
static int __init dw_i2c_init_driver(void)
{
return platform_driver_register(&dw_i2c_driver);
}
subsys_initcall(dw_i2c_init_driver);
static void __exit dw_i2c_exit_driver(void)
{
platform_driver_unregister(&dw_i2c_driver);
}
module_exit(dw_i2c_exit_driver);
MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter");
MODULE_LICENSE("GPL");