OpenCloudOS-Kernel/drivers/leds/leds-lp8860.c

492 lines
12 KiB
C

/*
* TI LP8860 4-Channel LED Driver
*
* Copyright (C) 2014 Texas Instruments
*
* Author: Dan Murphy <dmurphy@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
*/
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/leds.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#define LP8860_DISP_CL1_BRT_MSB 0x00
#define LP8860_DISP_CL1_BRT_LSB 0x01
#define LP8860_DISP_CL1_CURR_MSB 0x02
#define LP8860_DISP_CL1_CURR_LSB 0x03
#define LP8860_CL2_BRT_MSB 0x04
#define LP8860_CL2_BRT_LSB 0x05
#define LP8860_CL2_CURRENT 0x06
#define LP8860_CL3_BRT_MSB 0x07
#define LP8860_CL3_BRT_LSB 0x08
#define LP8860_CL3_CURRENT 0x09
#define LP8860_CL4_BRT_MSB 0x0a
#define LP8860_CL4_BRT_LSB 0x0b
#define LP8860_CL4_CURRENT 0x0c
#define LP8860_CONFIG 0x0d
#define LP8860_STATUS 0x0e
#define LP8860_FAULT 0x0f
#define LP8860_LED_FAULT 0x10
#define LP8860_FAULT_CLEAR 0x11
#define LP8860_ID 0x12
#define LP8860_TEMP_MSB 0x13
#define LP8860_TEMP_LSB 0x14
#define LP8860_DISP_LED_CURR_MSB 0x15
#define LP8860_DISP_LED_CURR_LSB 0x16
#define LP8860_DISP_LED_PWM_MSB 0x17
#define LP8860_DISP_LED_PWM_LSB 0x18
#define LP8860_EEPROM_CNTRL 0x19
#define LP8860_EEPROM_UNLOCK 0x1a
#define LP8860_EEPROM_REG_0 0x60
#define LP8860_EEPROM_REG_1 0x61
#define LP8860_EEPROM_REG_2 0x62
#define LP8860_EEPROM_REG_3 0x63
#define LP8860_EEPROM_REG_4 0x64
#define LP8860_EEPROM_REG_5 0x65
#define LP8860_EEPROM_REG_6 0x66
#define LP8860_EEPROM_REG_7 0x67
#define LP8860_EEPROM_REG_8 0x68
#define LP8860_EEPROM_REG_9 0x69
#define LP8860_EEPROM_REG_10 0x6a
#define LP8860_EEPROM_REG_11 0x6b
#define LP8860_EEPROM_REG_12 0x6c
#define LP8860_EEPROM_REG_13 0x6d
#define LP8860_EEPROM_REG_14 0x6e
#define LP8860_EEPROM_REG_15 0x6f
#define LP8860_EEPROM_REG_16 0x70
#define LP8860_EEPROM_REG_17 0x71
#define LP8860_EEPROM_REG_18 0x72
#define LP8860_EEPROM_REG_19 0x73
#define LP8860_EEPROM_REG_20 0x74
#define LP8860_EEPROM_REG_21 0x75
#define LP8860_EEPROM_REG_22 0x76
#define LP8860_EEPROM_REG_23 0x77
#define LP8860_EEPROM_REG_24 0x78
#define LP8860_LOCK_EEPROM 0x00
#define LP8860_UNLOCK_EEPROM 0x01
#define LP8860_PROGRAM_EEPROM 0x02
#define LP8860_EEPROM_CODE_1 0x08
#define LP8860_EEPROM_CODE_2 0xba
#define LP8860_EEPROM_CODE_3 0xef
#define LP8860_CLEAR_FAULTS 0x01
#define LP8860_DISP_LED_NAME "display_cluster"
/**
* struct lp8860_led -
* @lock - Lock for reading/writing the device
* @work - Work item used to off load the brightness register writes
* @client - Pointer to the I2C client
* @led_dev - led class device pointer
* @regmap - Devices register map
* @eeprom_regmap - EEPROM register map
* @enable_gpio - VDDIO/EN gpio to enable communication interface
* @regulator - LED supply regulator pointer
* @brightness - Current brightness value requested
* @label - LED label
**/
struct lp8860_led {
struct mutex lock;
struct work_struct work;
struct i2c_client *client;
struct led_classdev led_dev;
struct regmap *regmap;
struct regmap *eeprom_regmap;
struct gpio_desc *enable_gpio;
struct regulator *regulator;
enum led_brightness brightness;
const char *label;
};
struct lp8860_eeprom_reg {
uint8_t reg;
uint8_t value;
};
static struct lp8860_eeprom_reg lp8860_eeprom_disp_regs[] = {
{ LP8860_EEPROM_REG_0, 0xed },
{ LP8860_EEPROM_REG_1, 0xdf },
{ LP8860_EEPROM_REG_2, 0xdc },
{ LP8860_EEPROM_REG_3, 0xf0 },
{ LP8860_EEPROM_REG_4, 0xdf },
{ LP8860_EEPROM_REG_5, 0xe5 },
{ LP8860_EEPROM_REG_6, 0xf2 },
{ LP8860_EEPROM_REG_7, 0x77 },
{ LP8860_EEPROM_REG_8, 0x77 },
{ LP8860_EEPROM_REG_9, 0x71 },
{ LP8860_EEPROM_REG_10, 0x3f },
{ LP8860_EEPROM_REG_11, 0xb7 },
{ LP8860_EEPROM_REG_12, 0x17 },
{ LP8860_EEPROM_REG_13, 0xef },
{ LP8860_EEPROM_REG_14, 0xb0 },
{ LP8860_EEPROM_REG_15, 0x87 },
{ LP8860_EEPROM_REG_16, 0xce },
{ LP8860_EEPROM_REG_17, 0x72 },
{ LP8860_EEPROM_REG_18, 0xe5 },
{ LP8860_EEPROM_REG_19, 0xdf },
{ LP8860_EEPROM_REG_20, 0x35 },
{ LP8860_EEPROM_REG_21, 0x06 },
{ LP8860_EEPROM_REG_22, 0xdc },
{ LP8860_EEPROM_REG_23, 0x88 },
{ LP8860_EEPROM_REG_24, 0x3E },
};
static int lp8860_unlock_eeprom(struct lp8860_led *led, int lock)
{
int ret;
mutex_lock(&led->lock);
if (lock == LP8860_UNLOCK_EEPROM) {
ret = regmap_write(led->regmap,
LP8860_EEPROM_UNLOCK,
LP8860_EEPROM_CODE_1);
if (ret) {
dev_err(&led->client->dev, "EEPROM Unlock failed\n");
goto out;
}
ret = regmap_write(led->regmap,
LP8860_EEPROM_UNLOCK,
LP8860_EEPROM_CODE_2);
if (ret) {
dev_err(&led->client->dev, "EEPROM Unlock failed\n");
goto out;
}
ret = regmap_write(led->regmap,
LP8860_EEPROM_UNLOCK,
LP8860_EEPROM_CODE_3);
if (ret) {
dev_err(&led->client->dev, "EEPROM Unlock failed\n");
goto out;
}
} else {
ret = regmap_write(led->regmap,
LP8860_EEPROM_UNLOCK,
LP8860_LOCK_EEPROM);
}
out:
mutex_unlock(&led->lock);
return ret;
}
static int lp8860_fault_check(struct lp8860_led *led)
{
int ret, fault;
unsigned int read_buf;
ret = regmap_read(led->regmap, LP8860_LED_FAULT, &read_buf);
if (ret)
goto out;
fault = read_buf;
ret = regmap_read(led->regmap, LP8860_FAULT, &read_buf);
if (ret)
goto out;
fault |= read_buf;
/* Attempt to clear any faults */
if (fault)
ret = regmap_write(led->regmap, LP8860_FAULT_CLEAR,
LP8860_CLEAR_FAULTS);
out:
return ret;
}
static void lp8860_led_brightness_work(struct work_struct *work)
{
struct lp8860_led *led = container_of(work, struct lp8860_led, work);
int ret;
int disp_brightness = led->brightness * 255;
mutex_lock(&led->lock);
ret = lp8860_fault_check(led);
if (ret) {
dev_err(&led->client->dev, "Cannot read/clear faults\n");
goto out;
}
ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_MSB,
(disp_brightness & 0xff00) >> 8);
if (ret) {
dev_err(&led->client->dev, "Cannot write CL1 MSB\n");
goto out;
}
ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_LSB,
disp_brightness & 0xff);
if (ret) {
dev_err(&led->client->dev, "Cannot write CL1 LSB\n");
goto out;
}
out:
mutex_unlock(&led->lock);
}
static void lp8860_brightness_set(struct led_classdev *led_cdev,
enum led_brightness brt_val)
{
struct lp8860_led *led =
container_of(led_cdev, struct lp8860_led, led_dev);
led->brightness = brt_val;
schedule_work(&led->work);
}
static int lp8860_init(struct lp8860_led *led)
{
unsigned int read_buf;
int ret, i, reg_count;
if (led->enable_gpio)
gpiod_direction_output(led->enable_gpio, 1);
ret = lp8860_fault_check(led);
if (ret)
goto out;
ret = regmap_read(led->regmap, LP8860_STATUS, &read_buf);
if (ret)
goto out;
ret = lp8860_unlock_eeprom(led, LP8860_UNLOCK_EEPROM);
if (ret) {
dev_err(&led->client->dev, "Failed unlocking EEPROM\n");
goto out;
}
reg_count = ARRAY_SIZE(lp8860_eeprom_disp_regs) / sizeof(lp8860_eeprom_disp_regs[0]);
for (i = 0; i < reg_count; i++) {
ret = regmap_write(led->eeprom_regmap,
lp8860_eeprom_disp_regs[i].reg,
lp8860_eeprom_disp_regs[i].value);
if (ret) {
dev_err(&led->client->dev, "Failed writing EEPROM\n");
goto out;
}
}
ret = lp8860_unlock_eeprom(led, LP8860_LOCK_EEPROM);
if (ret)
goto out;
ret = regmap_write(led->regmap,
LP8860_EEPROM_CNTRL,
LP8860_PROGRAM_EEPROM);
if (ret)
dev_err(&led->client->dev, "Failed programming EEPROM\n");
out:
if (ret)
if (led->enable_gpio)
gpiod_direction_output(led->enable_gpio, 0);
return ret;
}
static struct reg_default lp8860_reg_defs[] = {
{ LP8860_DISP_CL1_BRT_MSB, 0x00},
{ LP8860_DISP_CL1_BRT_LSB, 0x00},
{ LP8860_DISP_CL1_CURR_MSB, 0x00},
{ LP8860_DISP_CL1_CURR_LSB, 0x00},
{ LP8860_CL2_BRT_MSB, 0x00},
{ LP8860_CL2_BRT_LSB, 0x00},
{ LP8860_CL2_CURRENT, 0x00},
{ LP8860_CL3_BRT_MSB, 0x00},
{ LP8860_CL3_BRT_LSB, 0x00},
{ LP8860_CL3_CURRENT, 0x00},
{ LP8860_CL4_BRT_MSB, 0x00},
{ LP8860_CL4_BRT_LSB, 0x00},
{ LP8860_CL4_CURRENT, 0x00},
{ LP8860_CONFIG, 0x00},
{ LP8860_FAULT_CLEAR, 0x00},
{ LP8860_EEPROM_CNTRL, 0x80},
{ LP8860_EEPROM_UNLOCK, 0x00},
};
static const struct regmap_config lp8860_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = LP8860_EEPROM_UNLOCK,
.reg_defaults = lp8860_reg_defs,
.num_reg_defaults = ARRAY_SIZE(lp8860_reg_defs),
.cache_type = REGCACHE_NONE,
};
static struct reg_default lp8860_eeprom_defs[] = {
{ LP8860_EEPROM_REG_0, 0x00 },
{ LP8860_EEPROM_REG_1, 0x00 },
{ LP8860_EEPROM_REG_2, 0x00 },
{ LP8860_EEPROM_REG_3, 0x00 },
{ LP8860_EEPROM_REG_4, 0x00 },
{ LP8860_EEPROM_REG_5, 0x00 },
{ LP8860_EEPROM_REG_6, 0x00 },
{ LP8860_EEPROM_REG_7, 0x00 },
{ LP8860_EEPROM_REG_8, 0x00 },
{ LP8860_EEPROM_REG_9, 0x00 },
{ LP8860_EEPROM_REG_10, 0x00 },
{ LP8860_EEPROM_REG_11, 0x00 },
{ LP8860_EEPROM_REG_12, 0x00 },
{ LP8860_EEPROM_REG_13, 0x00 },
{ LP8860_EEPROM_REG_14, 0x00 },
{ LP8860_EEPROM_REG_15, 0x00 },
{ LP8860_EEPROM_REG_16, 0x00 },
{ LP8860_EEPROM_REG_17, 0x00 },
{ LP8860_EEPROM_REG_18, 0x00 },
{ LP8860_EEPROM_REG_19, 0x00 },
{ LP8860_EEPROM_REG_20, 0x00 },
{ LP8860_EEPROM_REG_21, 0x00 },
{ LP8860_EEPROM_REG_22, 0x00 },
{ LP8860_EEPROM_REG_23, 0x00 },
{ LP8860_EEPROM_REG_24, 0x00 },
};
static const struct regmap_config lp8860_eeprom_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = LP8860_EEPROM_REG_24,
.reg_defaults = lp8860_eeprom_defs,
.num_reg_defaults = ARRAY_SIZE(lp8860_eeprom_defs),
.cache_type = REGCACHE_NONE,
};
static int lp8860_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret;
struct lp8860_led *led;
struct device_node *np = client->dev.of_node;
led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
if (!led)
return -ENOMEM;
led->label = LP8860_DISP_LED_NAME;
if (client->dev.of_node) {
ret = of_property_read_string(np, "label", &led->label);
if (ret) {
dev_err(&client->dev, "Missing label in dt\n");
return -EINVAL;
}
}
led->enable_gpio = devm_gpiod_get(&client->dev, "enable");
if (IS_ERR(led->enable_gpio))
led->enable_gpio = NULL;
else
gpiod_direction_output(led->enable_gpio, 0);
led->regulator = devm_regulator_get(&client->dev, "vled");
if (IS_ERR(led->regulator))
led->regulator = NULL;
led->client = client;
led->led_dev.name = led->label;
led->led_dev.max_brightness = LED_FULL;
led->led_dev.brightness_set = lp8860_brightness_set;
mutex_init(&led->lock);
INIT_WORK(&led->work, lp8860_led_brightness_work);
i2c_set_clientdata(client, led);
led->regmap = devm_regmap_init_i2c(client, &lp8860_regmap_config);
if (IS_ERR(led->regmap)) {
ret = PTR_ERR(led->regmap);
dev_err(&client->dev, "Failed to allocate register map: %d\n",
ret);
return ret;
}
led->eeprom_regmap = devm_regmap_init_i2c(client, &lp8860_eeprom_regmap_config);
if (IS_ERR(led->eeprom_regmap)) {
ret = PTR_ERR(led->eeprom_regmap);
dev_err(&client->dev, "Failed to allocate register map: %d\n",
ret);
return ret;
}
ret = lp8860_init(led);
if (ret)
return ret;
ret = led_classdev_register(&client->dev, &led->led_dev);
if (ret) {
dev_err(&client->dev, "led register err: %d\n", ret);
return ret;
}
return 0;
}
static int lp8860_remove(struct i2c_client *client)
{
struct lp8860_led *led = i2c_get_clientdata(client);
int ret;
led_classdev_unregister(&led->led_dev);
cancel_work_sync(&led->work);
if (led->enable_gpio)
gpiod_direction_output(led->enable_gpio, 0);
if (led->regulator) {
ret = regulator_disable(led->regulator);
if (ret)
dev_err(&led->client->dev,
"Failed to disable regulator\n");
}
return 0;
}
static const struct i2c_device_id lp8860_id[] = {
{ "lp8860", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lp8860_id);
#ifdef CONFIG_OF
static const struct of_device_id of_lp8860_leds_match[] = {
{ .compatible = "ti,lp8860", },
{},
};
MODULE_DEVICE_TABLE(of, of_lp8860_leds_match);
#endif
static struct i2c_driver lp8860_driver = {
.driver = {
.name = "lp8860",
.of_match_table = of_match_ptr(of_lp8860_leds_match),
},
.probe = lp8860_probe,
.remove = lp8860_remove,
.id_table = lp8860_id,
};
module_i2c_driver(lp8860_driver);
MODULE_DESCRIPTION("Texas Instruments LP8860 LED drvier");
MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
MODULE_LICENSE("GPL");