458 lines
11 KiB
C
458 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* rcar_gen2 Core CPG Clocks
|
|
*
|
|
* Copyright (C) 2013 Ideas On Board SPRL
|
|
*
|
|
* Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
*/
|
|
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/clk/renesas.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/math64.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/soc/renesas/rcar-rst.h>
|
|
|
|
struct rcar_gen2_cpg {
|
|
struct clk_onecell_data data;
|
|
spinlock_t lock;
|
|
void __iomem *reg;
|
|
};
|
|
|
|
#define CPG_FRQCRB 0x00000004
|
|
#define CPG_FRQCRB_KICK BIT(31)
|
|
#define CPG_SDCKCR 0x00000074
|
|
#define CPG_PLL0CR 0x000000d8
|
|
#define CPG_FRQCRC 0x000000e0
|
|
#define CPG_FRQCRC_ZFC_MASK (0x1f << 8)
|
|
#define CPG_FRQCRC_ZFC_SHIFT 8
|
|
#define CPG_ADSPCKCR 0x0000025c
|
|
#define CPG_RCANCKCR 0x00000270
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Z Clock
|
|
*
|
|
* Traits of this clock:
|
|
* prepare - clk_prepare only ensures that parents are prepared
|
|
* enable - clk_enable only ensures that parents are enabled
|
|
* rate - rate is adjustable. clk->rate = parent->rate * mult / 32
|
|
* parent - fixed parent. No clk_set_parent support
|
|
*/
|
|
|
|
struct cpg_z_clk {
|
|
struct clk_hw hw;
|
|
void __iomem *reg;
|
|
void __iomem *kick_reg;
|
|
};
|
|
|
|
#define to_z_clk(_hw) container_of(_hw, struct cpg_z_clk, hw)
|
|
|
|
static unsigned long cpg_z_clk_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct cpg_z_clk *zclk = to_z_clk(hw);
|
|
unsigned int mult;
|
|
unsigned int val;
|
|
|
|
val = (readl(zclk->reg) & CPG_FRQCRC_ZFC_MASK) >> CPG_FRQCRC_ZFC_SHIFT;
|
|
mult = 32 - val;
|
|
|
|
return div_u64((u64)parent_rate * mult, 32);
|
|
}
|
|
|
|
static long cpg_z_clk_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *parent_rate)
|
|
{
|
|
unsigned long prate = *parent_rate;
|
|
unsigned int mult;
|
|
|
|
if (!prate)
|
|
prate = 1;
|
|
|
|
mult = div_u64((u64)rate * 32, prate);
|
|
mult = clamp(mult, 1U, 32U);
|
|
|
|
return *parent_rate / 32 * mult;
|
|
}
|
|
|
|
static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct cpg_z_clk *zclk = to_z_clk(hw);
|
|
unsigned int mult;
|
|
u32 val, kick;
|
|
unsigned int i;
|
|
|
|
mult = div_u64((u64)rate * 32, parent_rate);
|
|
mult = clamp(mult, 1U, 32U);
|
|
|
|
if (readl(zclk->kick_reg) & CPG_FRQCRB_KICK)
|
|
return -EBUSY;
|
|
|
|
val = readl(zclk->reg);
|
|
val &= ~CPG_FRQCRC_ZFC_MASK;
|
|
val |= (32 - mult) << CPG_FRQCRC_ZFC_SHIFT;
|
|
writel(val, zclk->reg);
|
|
|
|
/*
|
|
* Set KICK bit in FRQCRB to update hardware setting and wait for
|
|
* clock change completion.
|
|
*/
|
|
kick = readl(zclk->kick_reg);
|
|
kick |= CPG_FRQCRB_KICK;
|
|
writel(kick, zclk->kick_reg);
|
|
|
|
/*
|
|
* Note: There is no HW information about the worst case latency.
|
|
*
|
|
* Using experimental measurements, it seems that no more than
|
|
* ~10 iterations are needed, independently of the CPU rate.
|
|
* Since this value might be dependent on external xtal rate, pll1
|
|
* rate or even the other emulation clocks rate, use 1000 as a
|
|
* "super" safe value.
|
|
*/
|
|
for (i = 1000; i; i--) {
|
|
if (!(readl(zclk->kick_reg) & CPG_FRQCRB_KICK))
|
|
return 0;
|
|
|
|
cpu_relax();
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static const struct clk_ops cpg_z_clk_ops = {
|
|
.recalc_rate = cpg_z_clk_recalc_rate,
|
|
.round_rate = cpg_z_clk_round_rate,
|
|
.set_rate = cpg_z_clk_set_rate,
|
|
};
|
|
|
|
static struct clk * __init cpg_z_clk_register(struct rcar_gen2_cpg *cpg)
|
|
{
|
|
static const char *parent_name = "pll0";
|
|
struct clk_init_data init;
|
|
struct cpg_z_clk *zclk;
|
|
struct clk *clk;
|
|
|
|
zclk = kzalloc(sizeof(*zclk), GFP_KERNEL);
|
|
if (!zclk)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
init.name = "z";
|
|
init.ops = &cpg_z_clk_ops;
|
|
init.flags = 0;
|
|
init.parent_names = &parent_name;
|
|
init.num_parents = 1;
|
|
|
|
zclk->reg = cpg->reg + CPG_FRQCRC;
|
|
zclk->kick_reg = cpg->reg + CPG_FRQCRB;
|
|
zclk->hw.init = &init;
|
|
|
|
clk = clk_register(NULL, &zclk->hw);
|
|
if (IS_ERR(clk))
|
|
kfree(zclk);
|
|
|
|
return clk;
|
|
}
|
|
|
|
static struct clk * __init cpg_rcan_clk_register(struct rcar_gen2_cpg *cpg,
|
|
struct device_node *np)
|
|
{
|
|
const char *parent_name = of_clk_get_parent_name(np, 1);
|
|
struct clk_fixed_factor *fixed;
|
|
struct clk_gate *gate;
|
|
struct clk *clk;
|
|
|
|
fixed = kzalloc(sizeof(*fixed), GFP_KERNEL);
|
|
if (!fixed)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
fixed->mult = 1;
|
|
fixed->div = 6;
|
|
|
|
gate = kzalloc(sizeof(*gate), GFP_KERNEL);
|
|
if (!gate) {
|
|
kfree(fixed);
|
|
return ERR_PTR(-ENOMEM);
|
|
}
|
|
|
|
gate->reg = cpg->reg + CPG_RCANCKCR;
|
|
gate->bit_idx = 8;
|
|
gate->flags = CLK_GATE_SET_TO_DISABLE;
|
|
gate->lock = &cpg->lock;
|
|
|
|
clk = clk_register_composite(NULL, "rcan", &parent_name, 1, NULL, NULL,
|
|
&fixed->hw, &clk_fixed_factor_ops,
|
|
&gate->hw, &clk_gate_ops, 0);
|
|
if (IS_ERR(clk)) {
|
|
kfree(gate);
|
|
kfree(fixed);
|
|
}
|
|
|
|
return clk;
|
|
}
|
|
|
|
/* ADSP divisors */
|
|
static const struct clk_div_table cpg_adsp_div_table[] = {
|
|
{ 1, 3 }, { 2, 4 }, { 3, 6 }, { 4, 8 },
|
|
{ 5, 12 }, { 6, 16 }, { 7, 18 }, { 8, 24 },
|
|
{ 10, 36 }, { 11, 48 }, { 0, 0 },
|
|
};
|
|
|
|
static struct clk * __init cpg_adsp_clk_register(struct rcar_gen2_cpg *cpg)
|
|
{
|
|
const char *parent_name = "pll1";
|
|
struct clk_divider *div;
|
|
struct clk_gate *gate;
|
|
struct clk *clk;
|
|
|
|
div = kzalloc(sizeof(*div), GFP_KERNEL);
|
|
if (!div)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
div->reg = cpg->reg + CPG_ADSPCKCR;
|
|
div->width = 4;
|
|
div->table = cpg_adsp_div_table;
|
|
div->lock = &cpg->lock;
|
|
|
|
gate = kzalloc(sizeof(*gate), GFP_KERNEL);
|
|
if (!gate) {
|
|
kfree(div);
|
|
return ERR_PTR(-ENOMEM);
|
|
}
|
|
|
|
gate->reg = cpg->reg + CPG_ADSPCKCR;
|
|
gate->bit_idx = 8;
|
|
gate->flags = CLK_GATE_SET_TO_DISABLE;
|
|
gate->lock = &cpg->lock;
|
|
|
|
clk = clk_register_composite(NULL, "adsp", &parent_name, 1, NULL, NULL,
|
|
&div->hw, &clk_divider_ops,
|
|
&gate->hw, &clk_gate_ops, 0);
|
|
if (IS_ERR(clk)) {
|
|
kfree(gate);
|
|
kfree(div);
|
|
}
|
|
|
|
return clk;
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* CPG Clock Data
|
|
*/
|
|
|
|
/*
|
|
* MD EXTAL PLL0 PLL1 PLL3
|
|
* 14 13 19 (MHz) *1 *1
|
|
*---------------------------------------------------
|
|
* 0 0 0 15 x 1 x172/2 x208/2 x106
|
|
* 0 0 1 15 x 1 x172/2 x208/2 x88
|
|
* 0 1 0 20 x 1 x130/2 x156/2 x80
|
|
* 0 1 1 20 x 1 x130/2 x156/2 x66
|
|
* 1 0 0 26 / 2 x200/2 x240/2 x122
|
|
* 1 0 1 26 / 2 x200/2 x240/2 x102
|
|
* 1 1 0 30 / 2 x172/2 x208/2 x106
|
|
* 1 1 1 30 / 2 x172/2 x208/2 x88
|
|
*
|
|
* *1 : Table 7.6 indicates VCO output (PLLx = VCO/2)
|
|
*/
|
|
#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 12) | \
|
|
(((md) & BIT(13)) >> 12) | \
|
|
(((md) & BIT(19)) >> 19))
|
|
struct cpg_pll_config {
|
|
unsigned int extal_div;
|
|
unsigned int pll1_mult;
|
|
unsigned int pll3_mult;
|
|
unsigned int pll0_mult; /* For R-Car V2H and E2 only */
|
|
};
|
|
|
|
static const struct cpg_pll_config cpg_pll_configs[8] __initconst = {
|
|
{ 1, 208, 106, 200 }, { 1, 208, 88, 200 },
|
|
{ 1, 156, 80, 150 }, { 1, 156, 66, 150 },
|
|
{ 2, 240, 122, 230 }, { 2, 240, 102, 230 },
|
|
{ 2, 208, 106, 200 }, { 2, 208, 88, 200 },
|
|
};
|
|
|
|
/* SDHI divisors */
|
|
static const struct clk_div_table cpg_sdh_div_table[] = {
|
|
{ 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 },
|
|
{ 4, 8 }, { 5, 12 }, { 6, 16 }, { 7, 18 },
|
|
{ 8, 24 }, { 10, 36 }, { 11, 48 }, { 0, 0 },
|
|
};
|
|
|
|
static const struct clk_div_table cpg_sd01_div_table[] = {
|
|
{ 4, 8 },
|
|
{ 5, 12 }, { 6, 16 }, { 7, 18 }, { 8, 24 },
|
|
{ 10, 36 }, { 11, 48 }, { 12, 10 }, { 0, 0 },
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Initialization
|
|
*/
|
|
|
|
static u32 cpg_mode __initdata;
|
|
|
|
static const char * const pll0_mult_match[] = {
|
|
"renesas,r8a7792-cpg-clocks",
|
|
"renesas,r8a7794-cpg-clocks",
|
|
NULL
|
|
};
|
|
|
|
static struct clk * __init
|
|
rcar_gen2_cpg_register_clock(struct device_node *np, struct rcar_gen2_cpg *cpg,
|
|
const struct cpg_pll_config *config,
|
|
const char *name)
|
|
{
|
|
const struct clk_div_table *table = NULL;
|
|
const char *parent_name;
|
|
unsigned int shift;
|
|
unsigned int mult = 1;
|
|
unsigned int div = 1;
|
|
|
|
if (!strcmp(name, "main")) {
|
|
parent_name = of_clk_get_parent_name(np, 0);
|
|
div = config->extal_div;
|
|
} else if (!strcmp(name, "pll0")) {
|
|
/* PLL0 is a configurable multiplier clock. Register it as a
|
|
* fixed factor clock for now as there's no generic multiplier
|
|
* clock implementation and we currently have no need to change
|
|
* the multiplier value.
|
|
*/
|
|
if (of_device_compatible_match(np, pll0_mult_match)) {
|
|
/* R-Car V2H and E2 do not have PLL0CR */
|
|
mult = config->pll0_mult;
|
|
div = 3;
|
|
} else {
|
|
u32 value = readl(cpg->reg + CPG_PLL0CR);
|
|
mult = ((value >> 24) & ((1 << 7) - 1)) + 1;
|
|
}
|
|
parent_name = "main";
|
|
} else if (!strcmp(name, "pll1")) {
|
|
parent_name = "main";
|
|
mult = config->pll1_mult / 2;
|
|
} else if (!strcmp(name, "pll3")) {
|
|
parent_name = "main";
|
|
mult = config->pll3_mult;
|
|
} else if (!strcmp(name, "lb")) {
|
|
parent_name = "pll1";
|
|
div = cpg_mode & BIT(18) ? 36 : 24;
|
|
} else if (!strcmp(name, "qspi")) {
|
|
parent_name = "pll1_div2";
|
|
div = (cpg_mode & (BIT(3) | BIT(2) | BIT(1))) == BIT(2)
|
|
? 8 : 10;
|
|
} else if (!strcmp(name, "sdh")) {
|
|
parent_name = "pll1";
|
|
table = cpg_sdh_div_table;
|
|
shift = 8;
|
|
} else if (!strcmp(name, "sd0")) {
|
|
parent_name = "pll1";
|
|
table = cpg_sd01_div_table;
|
|
shift = 4;
|
|
} else if (!strcmp(name, "sd1")) {
|
|
parent_name = "pll1";
|
|
table = cpg_sd01_div_table;
|
|
shift = 0;
|
|
} else if (!strcmp(name, "z")) {
|
|
return cpg_z_clk_register(cpg);
|
|
} else if (!strcmp(name, "rcan")) {
|
|
return cpg_rcan_clk_register(cpg, np);
|
|
} else if (!strcmp(name, "adsp")) {
|
|
return cpg_adsp_clk_register(cpg);
|
|
} else {
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
if (!table)
|
|
return clk_register_fixed_factor(NULL, name, parent_name, 0,
|
|
mult, div);
|
|
else
|
|
return clk_register_divider_table(NULL, name, parent_name, 0,
|
|
cpg->reg + CPG_SDCKCR, shift,
|
|
4, 0, table, &cpg->lock);
|
|
}
|
|
|
|
/*
|
|
* Reset register definitions.
|
|
*/
|
|
#define MODEMR 0xe6160060
|
|
|
|
static u32 __init rcar_gen2_read_mode_pins(void)
|
|
{
|
|
void __iomem *modemr = ioremap_nocache(MODEMR, 4);
|
|
u32 mode;
|
|
|
|
BUG_ON(!modemr);
|
|
mode = ioread32(modemr);
|
|
iounmap(modemr);
|
|
|
|
return mode;
|
|
}
|
|
|
|
static void __init rcar_gen2_cpg_clocks_init(struct device_node *np)
|
|
{
|
|
const struct cpg_pll_config *config;
|
|
struct rcar_gen2_cpg *cpg;
|
|
struct clk **clks;
|
|
unsigned int i;
|
|
int num_clks;
|
|
|
|
if (rcar_rst_read_mode_pins(&cpg_mode)) {
|
|
/* Backward-compatibility with old DT */
|
|
pr_warn("%pOF: failed to obtain mode pins from RST\n", np);
|
|
cpg_mode = rcar_gen2_read_mode_pins();
|
|
}
|
|
|
|
num_clks = of_property_count_strings(np, "clock-output-names");
|
|
if (num_clks < 0) {
|
|
pr_err("%s: failed to count clocks\n", __func__);
|
|
return;
|
|
}
|
|
|
|
cpg = kzalloc(sizeof(*cpg), GFP_KERNEL);
|
|
clks = kcalloc(num_clks, sizeof(*clks), GFP_KERNEL);
|
|
if (cpg == NULL || clks == NULL) {
|
|
/* We're leaking memory on purpose, there's no point in cleaning
|
|
* up as the system won't boot anyway.
|
|
*/
|
|
return;
|
|
}
|
|
|
|
spin_lock_init(&cpg->lock);
|
|
|
|
cpg->data.clks = clks;
|
|
cpg->data.clk_num = num_clks;
|
|
|
|
cpg->reg = of_iomap(np, 0);
|
|
if (WARN_ON(cpg->reg == NULL))
|
|
return;
|
|
|
|
config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
|
|
|
|
for (i = 0; i < num_clks; ++i) {
|
|
const char *name;
|
|
struct clk *clk;
|
|
|
|
of_property_read_string_index(np, "clock-output-names", i,
|
|
&name);
|
|
|
|
clk = rcar_gen2_cpg_register_clock(np, cpg, config, name);
|
|
if (IS_ERR(clk))
|
|
pr_err("%s: failed to register %pOFn %s clock (%ld)\n",
|
|
__func__, np, name, PTR_ERR(clk));
|
|
else
|
|
cpg->data.clks[i] = clk;
|
|
}
|
|
|
|
of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data);
|
|
|
|
cpg_mstp_add_clk_domain(np);
|
|
}
|
|
CLK_OF_DECLARE(rcar_gen2_cpg_clks, "renesas,rcar-gen2-cpg-clocks",
|
|
rcar_gen2_cpg_clocks_init);
|