UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/media/usb/em28xx/em28xx-core.c

1342 lines
34 KiB
C
Raw Blame History

/*
em28xx-core.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
Markus Rechberger <mrechberger@gmail.com>
Mauro Carvalho Chehab <mchehab@infradead.org>
Sascha Sommer <saschasommer@freenet.de>
Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/vmalloc.h>
#include <sound/ac97_codec.h>
#include <media/v4l2-common.h>
#include "em28xx.h"
/* #define ENABLE_DEBUG_ISOC_FRAMES */
static unsigned int core_debug;
module_param(core_debug, int, 0644);
MODULE_PARM_DESC(core_debug, "enable debug messages [core]");
#define em28xx_coredbg(fmt, arg...) do {\
if (core_debug) \
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __func__ , ##arg); } while (0)
static unsigned int reg_debug;
module_param(reg_debug, int, 0644);
MODULE_PARM_DESC(reg_debug, "enable debug messages [URB reg]");
#define em28xx_regdbg(fmt, arg...) do {\
if (reg_debug) \
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __func__ , ##arg); } while (0)
static int alt;
module_param(alt, int, 0644);
MODULE_PARM_DESC(alt, "alternate setting to use for video endpoint");
static unsigned int disable_vbi;
module_param(disable_vbi, int, 0644);
MODULE_PARM_DESC(disable_vbi, "disable vbi support");
/* FIXME */
#define em28xx_isocdbg(fmt, arg...) do {\
if (core_debug) \
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __func__ , ##arg); } while (0)
/*
* em28xx_read_reg_req()
* reads data from the usb device specifying bRequest
*/
int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
char *buf, int len)
{
int ret;
int pipe = usb_rcvctrlpipe(dev->udev, 0);
if (dev->disconnected)
return -ENODEV;
if (len > URB_MAX_CTRL_SIZE)
return -EINVAL;
if (reg_debug) {
printk(KERN_DEBUG "(pipe 0x%08x): "
"IN: %02x %02x %02x %02x %02x %02x %02x %02x ",
pipe,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
req, 0, 0,
reg & 0xff, reg >> 8,
len & 0xff, len >> 8);
}
mutex_lock(&dev->ctrl_urb_lock);
ret = usb_control_msg(dev->udev, pipe, req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, reg, dev->urb_buf, len, HZ);
if (ret < 0) {
if (reg_debug)
printk(" failed!\n");
mutex_unlock(&dev->ctrl_urb_lock);
return usb_translate_errors(ret);
}
if (len)
memcpy(buf, dev->urb_buf, len);
mutex_unlock(&dev->ctrl_urb_lock);
if (reg_debug) {
int byte;
printk("<<<");
for (byte = 0; byte < len; byte++)
printk(" %02x", (unsigned char)buf[byte]);
printk("\n");
}
return ret;
}
/*
* em28xx_read_reg_req()
* reads data from the usb device specifying bRequest
*/
int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg)
{
int ret;
u8 val;
ret = em28xx_read_reg_req_len(dev, req, reg, &val, 1);
if (ret < 0)
return ret;
return val;
}
int em28xx_read_reg(struct em28xx *dev, u16 reg)
{
return em28xx_read_reg_req(dev, USB_REQ_GET_STATUS, reg);
}
EXPORT_SYMBOL_GPL(em28xx_read_reg);
/*
* em28xx_write_regs_req()
* sends data to the usb device, specifying bRequest
*/
int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
int len)
{
int ret;
int pipe = usb_sndctrlpipe(dev->udev, 0);
if (dev->disconnected)
return -ENODEV;
if ((len < 1) || (len > URB_MAX_CTRL_SIZE))
return -EINVAL;
if (reg_debug) {
int byte;
printk(KERN_DEBUG "(pipe 0x%08x): "
"OUT: %02x %02x %02x %02x %02x %02x %02x %02x >>>",
pipe,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
req, 0, 0,
reg & 0xff, reg >> 8,
len & 0xff, len >> 8);
for (byte = 0; byte < len; byte++)
printk(" %02x", (unsigned char)buf[byte]);
printk("\n");
}
mutex_lock(&dev->ctrl_urb_lock);
memcpy(dev->urb_buf, buf, len);
ret = usb_control_msg(dev->udev, pipe, req,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, reg, dev->urb_buf, len, HZ);
mutex_unlock(&dev->ctrl_urb_lock);
if (ret < 0)
return usb_translate_errors(ret);
if (dev->wait_after_write)
msleep(dev->wait_after_write);
return ret;
}
int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len)
{
int rc;
rc = em28xx_write_regs_req(dev, USB_REQ_GET_STATUS, reg, buf, len);
/* Stores GPO/GPIO values at the cache, if changed
Only write values should be stored, since input on a GPIO
register will return the input bits.
Not sure what happens on reading GPO register.
*/
if (rc >= 0) {
if (reg == dev->reg_gpo_num)
dev->reg_gpo = buf[0];
else if (reg == dev->reg_gpio_num)
dev->reg_gpio = buf[0];
}
return rc;
}
EXPORT_SYMBOL_GPL(em28xx_write_regs);
/* Write a single register */
int em28xx_write_reg(struct em28xx *dev, u16 reg, u8 val)
{
return em28xx_write_regs(dev, reg, &val, 1);
}
EXPORT_SYMBOL_GPL(em28xx_write_reg);
/*
* em28xx_write_reg_bits()
* sets only some bits (specified by bitmask) of a register, by first reading
* the actual value
*/
int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val,
u8 bitmask)
{
int oldval;
u8 newval;
/* Uses cache for gpo/gpio registers */
if (reg == dev->reg_gpo_num)
oldval = dev->reg_gpo;
else if (reg == dev->reg_gpio_num)
oldval = dev->reg_gpio;
else
oldval = em28xx_read_reg(dev, reg);
if (oldval < 0)
return oldval;
newval = (((u8) oldval) & ~bitmask) | (val & bitmask);
return em28xx_write_regs(dev, reg, &newval, 1);
}
EXPORT_SYMBOL_GPL(em28xx_write_reg_bits);
/*
* em28xx_is_ac97_ready()
* Checks if ac97 is ready
*/
static int em28xx_is_ac97_ready(struct em28xx *dev)
{
int ret, i;
/* Wait up to 50 ms for AC97 command to complete */
for (i = 0; i < 10; i++, msleep(5)) {
ret = em28xx_read_reg(dev, EM28XX_R43_AC97BUSY);
if (ret < 0)
return ret;
if (!(ret & 0x01))
return 0;
}
em28xx_warn("AC97 command still being executed: not handled properly!\n");
return -EBUSY;
}
/*
* em28xx_read_ac97()
* write a 16 bit value to the specified AC97 address (LSB first!)
*/
int em28xx_read_ac97(struct em28xx *dev, u8 reg)
{
int ret;
u8 addr = (reg & 0x7f) | 0x80;
u16 val;
ret = em28xx_is_ac97_ready(dev);
if (ret < 0)
return ret;
ret = em28xx_write_regs(dev, EM28XX_R42_AC97ADDR, &addr, 1);
if (ret < 0)
return ret;
ret = dev->em28xx_read_reg_req_len(dev, 0, EM28XX_R40_AC97LSB,
(u8 *)&val, sizeof(val));
if (ret < 0)
return ret;
return le16_to_cpu(val);
}
EXPORT_SYMBOL_GPL(em28xx_read_ac97);
/*
* em28xx_write_ac97()
* write a 16 bit value to the specified AC97 address (LSB first!)
*/
int em28xx_write_ac97(struct em28xx *dev, u8 reg, u16 val)
{
int ret;
u8 addr = reg & 0x7f;
__le16 value;
value = cpu_to_le16(val);
ret = em28xx_is_ac97_ready(dev);
if (ret < 0)
return ret;
ret = em28xx_write_regs(dev, EM28XX_R40_AC97LSB, (u8 *) &value, 2);
if (ret < 0)
return ret;
ret = em28xx_write_regs(dev, EM28XX_R42_AC97ADDR, &addr, 1);
if (ret < 0)
return ret;
return 0;
}
EXPORT_SYMBOL_GPL(em28xx_write_ac97);
struct em28xx_vol_itable {
enum em28xx_amux mux;
u8 reg;
};
static struct em28xx_vol_itable inputs[] = {
{ EM28XX_AMUX_VIDEO, AC97_VIDEO },
{ EM28XX_AMUX_LINE_IN, AC97_LINE },
{ EM28XX_AMUX_PHONE, AC97_PHONE },
{ EM28XX_AMUX_MIC, AC97_MIC },
{ EM28XX_AMUX_CD, AC97_CD },
{ EM28XX_AMUX_AUX, AC97_AUX },
{ EM28XX_AMUX_PCM_OUT, AC97_PCM },
};
static int set_ac97_input(struct em28xx *dev)
{
int ret, i;
enum em28xx_amux amux = dev->ctl_ainput;
/* EM28XX_AMUX_VIDEO2 is a special case used to indicate that
em28xx should point to LINE IN, while AC97 should use VIDEO
*/
if (amux == EM28XX_AMUX_VIDEO2)
amux = EM28XX_AMUX_VIDEO;
/* Mute all entres but the one that were selected */
for (i = 0; i < ARRAY_SIZE(inputs); i++) {
if (amux == inputs[i].mux)
ret = em28xx_write_ac97(dev, inputs[i].reg, 0x0808);
else
ret = em28xx_write_ac97(dev, inputs[i].reg, 0x8000);
if (ret < 0)
em28xx_warn("couldn't setup AC97 register %d\n",
inputs[i].reg);
}
return 0;
}
static int em28xx_set_audio_source(struct em28xx *dev)
{
int ret;
u8 input;
if (dev->board.is_em2800) {
if (dev->ctl_ainput == EM28XX_AMUX_VIDEO)
input = EM2800_AUDIO_SRC_TUNER;
else
input = EM2800_AUDIO_SRC_LINE;
ret = em28xx_write_regs(dev, EM2800_R08_AUDIOSRC, &input, 1);
if (ret < 0)
return ret;
}
if (dev->board.has_msp34xx)
input = EM28XX_AUDIO_SRC_TUNER;
else {
switch (dev->ctl_ainput) {
case EM28XX_AMUX_VIDEO:
input = EM28XX_AUDIO_SRC_TUNER;
break;
default:
input = EM28XX_AUDIO_SRC_LINE;
break;
}
}
if (dev->board.mute_gpio && dev->mute)
em28xx_gpio_set(dev, dev->board.mute_gpio);
else
em28xx_gpio_set(dev, INPUT(dev->ctl_input)->gpio);
ret = em28xx_write_reg_bits(dev, EM28XX_R0E_AUDIOSRC, input, 0xc0);
if (ret < 0)
return ret;
msleep(5);
switch (dev->audio_mode.ac97) {
case EM28XX_NO_AC97:
break;
default:
ret = set_ac97_input(dev);
}
return ret;
}
struct em28xx_vol_otable {
enum em28xx_aout mux;
u8 reg;
};
static const struct em28xx_vol_otable outputs[] = {
{ EM28XX_AOUT_MASTER, AC97_MASTER },
{ EM28XX_AOUT_LINE, AC97_HEADPHONE },
{ EM28XX_AOUT_MONO, AC97_MASTER_MONO },
{ EM28XX_AOUT_LFE, AC97_CENTER_LFE_MASTER },
{ EM28XX_AOUT_SURR, AC97_SURROUND_MASTER },
};
int em28xx_audio_analog_set(struct em28xx *dev)
{
int ret, i;
u8 xclk;
if (!dev->audio_mode.has_audio)
return 0;
/* It is assumed that all devices use master volume for output.
It would be possible to use also line output.
*/
if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
/* Mute all outputs */
for (i = 0; i < ARRAY_SIZE(outputs); i++) {
ret = em28xx_write_ac97(dev, outputs[i].reg, 0x8000);
if (ret < 0)
em28xx_warn("couldn't setup AC97 register %d\n",
outputs[i].reg);
}
}
xclk = dev->board.xclk & 0x7f;
if (!dev->mute)
xclk |= EM28XX_XCLK_AUDIO_UNMUTE;
ret = em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk);
if (ret < 0)
return ret;
msleep(10);
/* Selects the proper audio input */
ret = em28xx_set_audio_source(dev);
/* Sets volume */
if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
int vol;
em28xx_write_ac97(dev, AC97_POWERDOWN, 0x4200);
em28xx_write_ac97(dev, AC97_EXTENDED_STATUS, 0x0031);
em28xx_write_ac97(dev, AC97_PCM_LR_ADC_RATE, 0xbb80);
/* LSB: left channel - both channels with the same level */
vol = (0x1f - dev->volume) | ((0x1f - dev->volume) << 8);
/* Mute device, if needed */
if (dev->mute)
vol |= 0x8000;
/* Sets volume */
for (i = 0; i < ARRAY_SIZE(outputs); i++) {
if (dev->ctl_aoutput & outputs[i].mux)
ret = em28xx_write_ac97(dev, outputs[i].reg,
vol);
if (ret < 0)
em28xx_warn("couldn't setup AC97 register %d\n",
outputs[i].reg);
}
if (dev->ctl_aoutput & EM28XX_AOUT_PCM_IN) {
int sel = ac97_return_record_select(dev->ctl_aoutput);
/* Use the same input for both left and right
channels */
sel |= (sel << 8);
em28xx_write_ac97(dev, AC97_REC_SEL, sel);
}
}
return ret;
}
EXPORT_SYMBOL_GPL(em28xx_audio_analog_set);
int em28xx_audio_setup(struct em28xx *dev)
{
int vid1, vid2, feat, cfg;
u32 vid;
if (dev->chip_id == CHIP_ID_EM2870 || dev->chip_id == CHIP_ID_EM2874
|| dev->chip_id == CHIP_ID_EM28174) {
/* Digital only device - don't load any alsa module */
dev->audio_mode.has_audio = false;
dev->has_audio_class = false;
dev->has_alsa_audio = false;
return 0;
}
dev->audio_mode.has_audio = true;
/* See how this device is configured */
cfg = em28xx_read_reg(dev, EM28XX_R00_CHIPCFG);
em28xx_info("Config register raw data: 0x%02x\n", cfg);
if (cfg < 0) {
/* Register read error? */
cfg = EM28XX_CHIPCFG_AC97; /* Be conservative */
} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == 0x00) {
/* The device doesn't have vendor audio at all */
dev->has_alsa_audio = false;
dev->audio_mode.has_audio = false;
return 0;
} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
EM28XX_CHIPCFG_I2S_3_SAMPRATES) {
em28xx_info("I2S Audio (3 sample rates)\n");
dev->audio_mode.i2s_3rates = 1;
} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
EM28XX_CHIPCFG_I2S_5_SAMPRATES) {
em28xx_info("I2S Audio (5 sample rates)\n");
dev->audio_mode.i2s_5rates = 1;
}
if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) != EM28XX_CHIPCFG_AC97) {
/* Skip the code that does AC97 vendor detection */
dev->audio_mode.ac97 = EM28XX_NO_AC97;
goto init_audio;
}
dev->audio_mode.ac97 = EM28XX_AC97_OTHER;
vid1 = em28xx_read_ac97(dev, AC97_VENDOR_ID1);
if (vid1 < 0) {
/*
* Device likely doesn't support AC97
* Note: (some) em2800 devices without eeprom reports 0x91 on
* CHIPCFG register, even not having an AC97 chip
*/
em28xx_warn("AC97 chip type couldn't be determined\n");
dev->audio_mode.ac97 = EM28XX_NO_AC97;
dev->has_alsa_audio = false;
dev->audio_mode.has_audio = false;
goto init_audio;
}
vid2 = em28xx_read_ac97(dev, AC97_VENDOR_ID2);
if (vid2 < 0)
goto init_audio;
vid = vid1 << 16 | vid2;
dev->audio_mode.ac97_vendor_id = vid;
em28xx_warn("AC97 vendor ID = 0x%08x\n", vid);
feat = em28xx_read_ac97(dev, AC97_RESET);
if (feat < 0)
goto init_audio;
dev->audio_mode.ac97_feat = feat;
em28xx_warn("AC97 features = 0x%04x\n", feat);
/* Try to identify what audio processor we have */
if (((vid == 0xffffffff) || (vid == 0x83847650)) && (feat == 0x6a90))
dev->audio_mode.ac97 = EM28XX_AC97_EM202;
else if ((vid >> 8) == 0x838476)
dev->audio_mode.ac97 = EM28XX_AC97_SIGMATEL;
init_audio:
/* Reports detected AC97 processor */
switch (dev->audio_mode.ac97) {
case EM28XX_NO_AC97:
em28xx_info("No AC97 audio processor\n");
break;
case EM28XX_AC97_EM202:
em28xx_info("Empia 202 AC97 audio processor detected\n");
break;
case EM28XX_AC97_SIGMATEL:
em28xx_info("Sigmatel audio processor detected(stac 97%02x)\n",
dev->audio_mode.ac97_vendor_id & 0xff);
break;
case EM28XX_AC97_OTHER:
em28xx_warn("Unknown AC97 audio processor detected!\n");
break;
default:
break;
}
return em28xx_audio_analog_set(dev);
}
EXPORT_SYMBOL_GPL(em28xx_audio_setup);
int em28xx_colorlevels_set_default(struct em28xx *dev)
{
em28xx_write_reg(dev, EM28XX_R20_YGAIN, CONTRAST_DEFAULT);
em28xx_write_reg(dev, EM28XX_R21_YOFFSET, BRIGHTNESS_DEFAULT);
em28xx_write_reg(dev, EM28XX_R22_UVGAIN, SATURATION_DEFAULT);
em28xx_write_reg(dev, EM28XX_R23_UOFFSET, BLUE_BALANCE_DEFAULT);
em28xx_write_reg(dev, EM28XX_R24_VOFFSET, RED_BALANCE_DEFAULT);
em28xx_write_reg(dev, EM28XX_R25_SHARPNESS, SHARPNESS_DEFAULT);
em28xx_write_reg(dev, EM28XX_R14_GAMMA, 0x20);
em28xx_write_reg(dev, EM28XX_R15_RGAIN, 0x20);
em28xx_write_reg(dev, EM28XX_R16_GGAIN, 0x20);
em28xx_write_reg(dev, EM28XX_R17_BGAIN, 0x20);
em28xx_write_reg(dev, EM28XX_R18_ROFFSET, 0x00);
em28xx_write_reg(dev, EM28XX_R19_GOFFSET, 0x00);
return em28xx_write_reg(dev, EM28XX_R1A_BOFFSET, 0x00);
}
int em28xx_capture_start(struct em28xx *dev, int start)
{
int rc;
if (dev->chip_id == CHIP_ID_EM2874 ||
dev->chip_id == CHIP_ID_EM2884 ||
dev->chip_id == CHIP_ID_EM28174) {
/* The Transport Stream Enable Register moved in em2874 */
if (!start) {
rc = em28xx_write_reg_bits(dev, EM2874_R5F_TS_ENABLE,
0x00,
EM2874_TS1_CAPTURE_ENABLE);
return rc;
}
/* Enable Transport Stream */
rc = em28xx_write_reg_bits(dev, EM2874_R5F_TS_ENABLE,
EM2874_TS1_CAPTURE_ENABLE,
EM2874_TS1_CAPTURE_ENABLE);
return rc;
}
/* FIXME: which is the best order? */
/* video registers are sampled by VREF */
rc = em28xx_write_reg_bits(dev, EM28XX_R0C_USBSUSP,
start ? 0x10 : 0x00, 0x10);
if (rc < 0)
return rc;
if (!start) {
/* disable video capture */
rc = em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x27);
return rc;
}
if (dev->board.is_webcam)
rc = em28xx_write_reg(dev, 0x13, 0x0c);
/* enable video capture */
rc = em28xx_write_reg(dev, 0x48, 0x00);
if (dev->mode == EM28XX_ANALOG_MODE)
rc = em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x67);
else
rc = em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x37);
msleep(6);
return rc;
}
int em28xx_vbi_supported(struct em28xx *dev)
{
/* Modprobe option to manually disable */
if (disable_vbi == 1)
return 0;
if (dev->board.is_webcam)
return 0;
/* FIXME: check subdevices for VBI support */
if (dev->chip_id == CHIP_ID_EM2860 ||
dev->chip_id == CHIP_ID_EM2883)
return 1;
/* Version of em28xx that does not support VBI */
return 0;
}
int em28xx_set_outfmt(struct em28xx *dev)
{
int ret;
u8 fmt, vinctrl;
fmt = dev->format->reg;
if (!dev->is_em25xx)
fmt |= 0x20;
/*
* NOTE: it's not clear if this is really needed !
* The datasheets say bit 5 is a reserved bit and devices seem to work
* fine without it. But the Windows driver sets it for em2710/50+em28xx
* devices and we've always been setting it, too.
*
* em2765 (em25xx, em276x/7x/8x) devices do NOT work with this bit set,
* it's likely used for an additional (compressed ?) format there.
*/
ret = em28xx_write_reg(dev, EM28XX_R27_OUTFMT, fmt);
if (ret < 0)
return ret;
ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, dev->vinmode);
if (ret < 0)
return ret;
vinctrl = dev->vinctl;
if (em28xx_vbi_supported(dev) == 1) {
vinctrl |= EM28XX_VINCTRL_VBI_RAW;
em28xx_write_reg(dev, EM28XX_R34_VBI_START_H, 0x00);
em28xx_write_reg(dev, EM28XX_R36_VBI_WIDTH, dev->vbi_width/4);
em28xx_write_reg(dev, EM28XX_R37_VBI_HEIGHT, dev->vbi_height);
if (dev->norm & V4L2_STD_525_60) {
/* NTSC */
em28xx_write_reg(dev, EM28XX_R35_VBI_START_V, 0x09);
} else if (dev->norm & V4L2_STD_625_50) {
/* PAL */
em28xx_write_reg(dev, EM28XX_R35_VBI_START_V, 0x07);
}
}
return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctrl);
}
static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax,
u8 ymin, u8 ymax)
{
em28xx_coredbg("em28xx Scale: (%d,%d)-(%d,%d)\n",
xmin, ymin, xmax, ymax);
em28xx_write_regs(dev, EM28XX_R28_XMIN, &xmin, 1);
em28xx_write_regs(dev, EM28XX_R29_XMAX, &xmax, 1);
em28xx_write_regs(dev, EM28XX_R2A_YMIN, &ymin, 1);
return em28xx_write_regs(dev, EM28XX_R2B_YMAX, &ymax, 1);
}
static void em28xx_capture_area_set(struct em28xx *dev, u8 hstart, u8 vstart,
u16 width, u16 height)
{
u8 cwidth = width >> 2;
u8 cheight = height >> 2;
u8 overflow = (height >> 9 & 0x02) | (width >> 10 & 0x01);
/* NOTE: size limit: 2047x1023 = 2MPix */
em28xx_coredbg("capture area set to (%d,%d): %dx%d\n",
hstart, vstart,
((overflow & 2) << 9 | cwidth << 2),
((overflow & 1) << 10 | cheight << 2));
em28xx_write_regs(dev, EM28XX_R1C_HSTART, &hstart, 1);
em28xx_write_regs(dev, EM28XX_R1D_VSTART, &vstart, 1);
em28xx_write_regs(dev, EM28XX_R1E_CWIDTH, &cwidth, 1);
em28xx_write_regs(dev, EM28XX_R1F_CHEIGHT, &cheight, 1);
em28xx_write_regs(dev, EM28XX_R1B_OFLOW, &overflow, 1);
/* FIXME: function/meaning of these registers ? */
/* FIXME: align width+height to multiples of 4 ?! */
if (dev->is_em25xx) {
em28xx_write_reg(dev, 0x34, width >> 4);
em28xx_write_reg(dev, 0x35, height >> 4);
}
}
static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v)
{
u8 mode;
/* the em2800 scaler only supports scaling down to 50% */
if (dev->board.is_em2800) {
mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00);
} else {
u8 buf[2];
buf[0] = h;
buf[1] = h >> 8;
em28xx_write_regs(dev, EM28XX_R30_HSCALELOW, (char *)buf, 2);
buf[0] = v;
buf[1] = v >> 8;
em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2);
/* it seems that both H and V scalers must be active
to work correctly */
mode = (h || v) ? 0x30 : 0x00;
}
return em28xx_write_reg_bits(dev, EM28XX_R26_COMPR, mode, 0x30);
}
/* FIXME: this only function read values from dev */
int em28xx_resolution_set(struct em28xx *dev)
{
int width, height;
width = norm_maxw(dev);
height = norm_maxh(dev);
/* Properly setup VBI */
dev->vbi_width = 720;
if (dev->norm & V4L2_STD_525_60)
dev->vbi_height = 12;
else
dev->vbi_height = 18;
em28xx_set_outfmt(dev);
em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2);
/* If we don't set the start position to 2 in VBI mode, we end up
with line 20/21 being YUYV encoded instead of being in 8-bit
greyscale. The core of the issue is that line 21 (and line 23 for
PAL WSS) are inside of active video region, and as a result they
get the pixelformatting associated with that area. So by cropping
it out, we end up with the same format as the rest of the VBI
region */
if (em28xx_vbi_supported(dev) == 1)
em28xx_capture_area_set(dev, 0, 2, width, height);
else
em28xx_capture_area_set(dev, 0, 0, width, height);
return em28xx_scaler_set(dev, dev->hscale, dev->vscale);
}
/* Set USB alternate setting for analog video */
int em28xx_set_alternate(struct em28xx *dev)
{
int errCode;
int i;
unsigned int min_pkt_size = dev->width * 2 + 4;
/* NOTE: for isoc transfers, only alt settings > 0 are allowed
bulk transfers seem to work only with alt=0 ! */
dev->alt = 0;
if ((alt > 0) && (alt < dev->num_alt)) {
em28xx_coredbg("alternate forced to %d\n", dev->alt);
dev->alt = alt;
goto set_alt;
}
if (dev->analog_xfer_bulk)
goto set_alt;
/* When image size is bigger than a certain value,
the frame size should be increased, otherwise, only
green screen will be received.
*/
if (dev->width * 2 * dev->height > 720 * 240 * 2)
min_pkt_size *= 2;
for (i = 0; i < dev->num_alt; i++) {
/* stop when the selected alt setting offers enough bandwidth */
if (dev->alt_max_pkt_size_isoc[i] >= min_pkt_size) {
dev->alt = i;
break;
/* otherwise make sure that we end up with the maximum bandwidth
because the min_pkt_size equation might be wrong...
*/
} else if (dev->alt_max_pkt_size_isoc[i] >
dev->alt_max_pkt_size_isoc[dev->alt])
dev->alt = i;
}
set_alt:
/* NOTE: for bulk transfers, we need to call usb_set_interface()
* even if the previous settings were the same. Otherwise streaming
* fails with all urbs having status = -EOVERFLOW ! */
if (dev->analog_xfer_bulk) {
dev->max_pkt_size = 512; /* USB 2.0 spec */
dev->packet_multiplier = EM28XX_BULK_PACKET_MULTIPLIER;
} else { /* isoc */
em28xx_coredbg("minimum isoc packet size: %u (alt=%d)\n",
min_pkt_size, dev->alt);
dev->max_pkt_size =
dev->alt_max_pkt_size_isoc[dev->alt];
dev->packet_multiplier = EM28XX_NUM_ISOC_PACKETS;
}
em28xx_coredbg("setting alternate %d with wMaxPacketSize=%u\n",
dev->alt, dev->max_pkt_size);
errCode = usb_set_interface(dev->udev, 0, dev->alt);
if (errCode < 0) {
em28xx_errdev("cannot change alternate number to %d (error=%i)\n",
dev->alt, errCode);
return errCode;
}
return 0;
}
int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio)
{
int rc = 0;
if (!gpio)
return rc;
if (dev->mode != EM28XX_SUSPEND) {
em28xx_write_reg(dev, 0x48, 0x00);
if (dev->mode == EM28XX_ANALOG_MODE)
em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x67);
else
em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x37);
msleep(6);
}
/* Send GPIO reset sequences specified at board entry */
while (gpio->sleep >= 0) {
if (gpio->reg >= 0) {
rc = em28xx_write_reg_bits(dev,
gpio->reg,
gpio->val,
gpio->mask);
if (rc < 0)
return rc;
}
if (gpio->sleep > 0)
msleep(gpio->sleep);
gpio++;
}
return rc;
}
EXPORT_SYMBOL_GPL(em28xx_gpio_set);
int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode)
{
if (dev->mode == set_mode)
return 0;
if (set_mode == EM28XX_SUSPEND) {
dev->mode = set_mode;
/* FIXME: add suspend support for ac97 */
return em28xx_gpio_set(dev, dev->board.suspend_gpio);
}
dev->mode = set_mode;
if (dev->mode == EM28XX_DIGITAL_MODE)
return em28xx_gpio_set(dev, dev->board.dvb_gpio);
else
return em28xx_gpio_set(dev, INPUT(dev->ctl_input)->gpio);
}
EXPORT_SYMBOL_GPL(em28xx_set_mode);
/* ------------------------------------------------------------------
URB control
------------------------------------------------------------------*/
/*
* URB completion handler for isoc/bulk transfers
*/
static void em28xx_irq_callback(struct urb *urb)
{
struct em28xx *dev = urb->context;
int i;
switch (urb->status) {
case 0: /* success */
case -ETIMEDOUT: /* NAK */
break;
case -ECONNRESET: /* kill */
case -ENOENT:
case -ESHUTDOWN:
return;
default: /* error */
em28xx_isocdbg("urb completition error %d.\n", urb->status);
break;
}
/* Copy data from URB */
spin_lock(&dev->slock);
dev->usb_ctl.urb_data_copy(dev, urb);
spin_unlock(&dev->slock);
/* Reset urb buffers */
for (i = 0; i < urb->number_of_packets; i++) {
/* isoc only (bulk: number_of_packets = 0) */
urb->iso_frame_desc[i].status = 0;
urb->iso_frame_desc[i].actual_length = 0;
}
urb->status = 0;
urb->status = usb_submit_urb(urb, GFP_ATOMIC);
if (urb->status) {
em28xx_isocdbg("urb resubmit failed (error=%i)\n",
urb->status);
}
}
/*
* Stop and Deallocate URBs
*/
void em28xx_uninit_usb_xfer(struct em28xx *dev, enum em28xx_mode mode)
{
struct urb *urb;
struct em28xx_usb_bufs *usb_bufs;
int i;
em28xx_isocdbg("em28xx: called em28xx_uninit_usb_xfer in mode %d\n",
mode);
if (mode == EM28XX_DIGITAL_MODE)
usb_bufs = &dev->usb_ctl.digital_bufs;
else
usb_bufs = &dev->usb_ctl.analog_bufs;
for (i = 0; i < usb_bufs->num_bufs; i++) {
urb = usb_bufs->urb[i];
if (urb) {
if (!irqs_disabled())
usb_kill_urb(urb);
else
usb_unlink_urb(urb);
if (usb_bufs->transfer_buffer[i]) {
usb_free_coherent(dev->udev,
urb->transfer_buffer_length,
usb_bufs->transfer_buffer[i],
urb->transfer_dma);
}
usb_free_urb(urb);
usb_bufs->urb[i] = NULL;
}
usb_bufs->transfer_buffer[i] = NULL;
}
kfree(usb_bufs->urb);
kfree(usb_bufs->transfer_buffer);
usb_bufs->urb = NULL;
usb_bufs->transfer_buffer = NULL;
usb_bufs->num_bufs = 0;
em28xx_capture_start(dev, 0);
}
EXPORT_SYMBOL_GPL(em28xx_uninit_usb_xfer);
/*
* Stop URBs
*/
void em28xx_stop_urbs(struct em28xx *dev)
{
int i;
struct urb *urb;
struct em28xx_usb_bufs *isoc_bufs = &dev->usb_ctl.digital_bufs;
em28xx_isocdbg("em28xx: called em28xx_stop_urbs\n");
for (i = 0; i < isoc_bufs->num_bufs; i++) {
urb = isoc_bufs->urb[i];
if (urb) {
if (!irqs_disabled())
usb_kill_urb(urb);
else
usb_unlink_urb(urb);
}
}
em28xx_capture_start(dev, 0);
}
EXPORT_SYMBOL_GPL(em28xx_stop_urbs);
/*
* Allocate URBs
*/
int em28xx_alloc_urbs(struct em28xx *dev, enum em28xx_mode mode, int xfer_bulk,
int num_bufs, int max_pkt_size, int packet_multiplier)
{
struct em28xx_usb_bufs *usb_bufs;
int i;
int sb_size, pipe;
struct urb *urb;
int j, k;
em28xx_isocdbg("em28xx: called em28xx_alloc_isoc in mode %d\n", mode);
/* Check mode and if we have an endpoint for the selected
transfer type, select buffer */
if (mode == EM28XX_DIGITAL_MODE) {
if ((xfer_bulk && !dev->dvb_ep_bulk) ||
(!xfer_bulk && !dev->dvb_ep_isoc)) {
em28xx_errdev("no endpoint for DVB mode and transfer type %d\n",
xfer_bulk > 0);
return -EINVAL;
}
usb_bufs = &dev->usb_ctl.digital_bufs;
} else if (mode == EM28XX_ANALOG_MODE) {
if ((xfer_bulk && !dev->analog_ep_bulk) ||
(!xfer_bulk && !dev->analog_ep_isoc)) {
em28xx_errdev("no endpoint for analog mode and transfer type %d\n",
xfer_bulk > 0);
return -EINVAL;
}
usb_bufs = &dev->usb_ctl.analog_bufs;
} else {
em28xx_errdev("invalid mode selected\n");
return -EINVAL;
}
/* De-allocates all pending stuff */
em28xx_uninit_usb_xfer(dev, mode);
usb_bufs->num_bufs = num_bufs;
usb_bufs->urb = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL);
if (!usb_bufs->urb) {
em28xx_errdev("cannot alloc memory for usb buffers\n");
return -ENOMEM;
}
usb_bufs->transfer_buffer = kzalloc(sizeof(void *)*num_bufs,
GFP_KERNEL);
if (!usb_bufs->transfer_buffer) {
em28xx_errdev("cannot allocate memory for usb transfer\n");
kfree(usb_bufs->urb);
return -ENOMEM;
}
usb_bufs->max_pkt_size = max_pkt_size;
if (xfer_bulk)
usb_bufs->num_packets = 0;
else
usb_bufs->num_packets = packet_multiplier;
dev->usb_ctl.vid_buf = NULL;
dev->usb_ctl.vbi_buf = NULL;
sb_size = packet_multiplier * usb_bufs->max_pkt_size;
/* allocate urbs and transfer buffers */
for (i = 0; i < usb_bufs->num_bufs; i++) {
urb = usb_alloc_urb(usb_bufs->num_packets, GFP_KERNEL);
if (!urb) {
em28xx_err("cannot alloc usb_ctl.urb %i\n", i);
em28xx_uninit_usb_xfer(dev, mode);
return -ENOMEM;
}
usb_bufs->urb[i] = urb;
usb_bufs->transfer_buffer[i] = usb_alloc_coherent(dev->udev,
sb_size, GFP_KERNEL, &urb->transfer_dma);
if (!usb_bufs->transfer_buffer[i]) {
em28xx_err("unable to allocate %i bytes for transfer"
" buffer %i%s\n",
sb_size, i,
in_interrupt() ? " while in int" : "");
em28xx_uninit_usb_xfer(dev, mode);
return -ENOMEM;
}
memset(usb_bufs->transfer_buffer[i], 0, sb_size);
if (xfer_bulk) { /* bulk */
pipe = usb_rcvbulkpipe(dev->udev,
mode == EM28XX_ANALOG_MODE ?
dev->analog_ep_bulk :
dev->dvb_ep_bulk);
usb_fill_bulk_urb(urb, dev->udev, pipe,
usb_bufs->transfer_buffer[i], sb_size,
em28xx_irq_callback, dev);
urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
} else { /* isoc */
pipe = usb_rcvisocpipe(dev->udev,
mode == EM28XX_ANALOG_MODE ?
dev->analog_ep_isoc :
dev->dvb_ep_isoc);
usb_fill_int_urb(urb, dev->udev, pipe,
usb_bufs->transfer_buffer[i], sb_size,
em28xx_irq_callback, dev, 1);
urb->transfer_flags = URB_ISO_ASAP |
URB_NO_TRANSFER_DMA_MAP;
k = 0;
for (j = 0; j < usb_bufs->num_packets; j++) {
urb->iso_frame_desc[j].offset = k;
urb->iso_frame_desc[j].length =
usb_bufs->max_pkt_size;
k += usb_bufs->max_pkt_size;
}
}
urb->number_of_packets = usb_bufs->num_packets;
}
return 0;
}
EXPORT_SYMBOL_GPL(em28xx_alloc_urbs);
/*
* Allocate URBs and start IRQ
*/
int em28xx_init_usb_xfer(struct em28xx *dev, enum em28xx_mode mode,
int xfer_bulk, int num_bufs, int max_pkt_size,
int packet_multiplier,
int (*urb_data_copy) (struct em28xx *dev, struct urb *urb))
{
struct em28xx_dmaqueue *dma_q = &dev->vidq;
struct em28xx_dmaqueue *vbi_dma_q = &dev->vbiq;
struct em28xx_usb_bufs *usb_bufs;
int i;
int rc;
int alloc;
em28xx_isocdbg("em28xx: called em28xx_init_usb_xfer in mode %d\n",
mode);
dev->usb_ctl.urb_data_copy = urb_data_copy;
if (mode == EM28XX_DIGITAL_MODE) {
usb_bufs = &dev->usb_ctl.digital_bufs;
/* no need to free/alloc usb buffers in digital mode */
alloc = 0;
} else {
usb_bufs = &dev->usb_ctl.analog_bufs;
alloc = 1;
}
if (alloc) {
rc = em28xx_alloc_urbs(dev, mode, xfer_bulk, num_bufs,
max_pkt_size, packet_multiplier);
if (rc)
return rc;
}
if (xfer_bulk) {
rc = usb_clear_halt(dev->udev, usb_bufs->urb[0]->pipe);
if (rc < 0) {
em28xx_err("failed to clear USB bulk endpoint stall/halt condition (error=%i)\n",
rc);
em28xx_uninit_usb_xfer(dev, mode);
return rc;
}
}
init_waitqueue_head(&dma_q->wq);
init_waitqueue_head(&vbi_dma_q->wq);
em28xx_capture_start(dev, 1);
/* submit urbs and enables IRQ */
for (i = 0; i < usb_bufs->num_bufs; i++) {
rc = usb_submit_urb(usb_bufs->urb[i], GFP_ATOMIC);
if (rc) {
em28xx_err("submit of urb %i failed (error=%i)\n", i,
rc);
em28xx_uninit_usb_xfer(dev, mode);
return rc;
}
}
return 0;
}
EXPORT_SYMBOL_GPL(em28xx_init_usb_xfer);
/*
* em28xx_wake_i2c()
* configure i2c attached devices
*/
void em28xx_wake_i2c(struct em28xx *dev)
{
v4l2_device_call_all(&dev->v4l2_dev, 0, core, reset, 0);
v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_routing,
INPUT(dev->ctl_input)->vmux, 0, 0);
v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0);
}
/*
* Device control list
*/
static LIST_HEAD(em28xx_devlist);
static DEFINE_MUTEX(em28xx_devlist_mutex);
/*
* Extension interface
*/
static LIST_HEAD(em28xx_extension_devlist);
int em28xx_register_extension(struct em28xx_ops *ops)
{
struct em28xx *dev = NULL;
mutex_lock(&em28xx_devlist_mutex);
list_add_tail(&ops->next, &em28xx_extension_devlist);
list_for_each_entry(dev, &em28xx_devlist, devlist) {
ops->init(dev);
}
mutex_unlock(&em28xx_devlist_mutex);
printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name);
return 0;
}
EXPORT_SYMBOL(em28xx_register_extension);
void em28xx_unregister_extension(struct em28xx_ops *ops)
{
struct em28xx *dev = NULL;
mutex_lock(&em28xx_devlist_mutex);
list_for_each_entry(dev, &em28xx_devlist, devlist) {
ops->fini(dev);
}
list_del(&ops->next);
mutex_unlock(&em28xx_devlist_mutex);
printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name);
}
EXPORT_SYMBOL(em28xx_unregister_extension);
void em28xx_init_extension(struct em28xx *dev)
{
const struct em28xx_ops *ops = NULL;
mutex_lock(&em28xx_devlist_mutex);
list_add_tail(&dev->devlist, &em28xx_devlist);
list_for_each_entry(ops, &em28xx_extension_devlist, next) {
if (ops->init)
ops->init(dev);
}
mutex_unlock(&em28xx_devlist_mutex);
}
void em28xx_close_extension(struct em28xx *dev)
{
const struct em28xx_ops *ops = NULL;
mutex_lock(&em28xx_devlist_mutex);
list_for_each_entry(ops, &em28xx_extension_devlist, next) {
if (ops->fini)
ops->fini(dev);
}
list_del(&dev->devlist);
mutex_unlock(&em28xx_devlist_mutex);
}
Reference in New Issue View Git Blame Copy Permalink